#!/bin/sh # # This is rc.conf - a file full of useful variables that you can set # to change the default startup behavior of your system. You should # not edit this file! Put any overrides into one of the ${rc_conf_files} # instead and you will be able to update these defaults later without # spamming your local configuration information. # # All arguments must be in double or single quotes. # # $Id: rc.conf,v 1.19 1999/07/11 04:05:34 iwasaki Exp $ ############################################################## ### Important initial Boot-time options #################### ############################################################## swapfile="NO" # Set to name of swapfile if aux swapfile desired. apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO). apmd_enable="NO" # Run apmd to handle APM event from userland. apmd_flags="" # Flags to apmd (if enabled). pccard_enable="NO" # Set to YES if you want to configure PCCARD devices. pccard_mem="DEFAULT" # If pccard_enable=YES, this is card memory address. pccard_ifconfig="NO" # Specialized pccard ethernet configuration (or NO). pccardd_flags="" # Additional flags for pccardd. pccard_conf="/etc/pccard.conf.sample" # pccardd(8) config file local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d" # startup script dirs. local_periodic="/usr/local/etc/periodic /usr/X11R6/etc/periodic" # periodic script dirs rc_conf_files="/etc/rc.conf /etc/rc.conf.local" ############################################################## ### Network configuration sub-section ###################### ############################################################## ### Basic network options: ### hostname="myname.my.domain" # Set this! nisdomainname="NO" # Set to NIS domain if using NIS (or NO). firewall_enable="NO" # Set to YES to enable firewall functionality firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall) firewall_quiet="NO" # Set to YES to suppress rule display natd_program="/sbin/natd" # path to natd, if you want a different one. natd_enable="NO" # Enable natd (if firewall_enable == YES). natd_interface="fxp0" # Public interface or IPaddress to use. natd_flags="" # Additional flags for natd. tcp_extensions="NO" # Set to Yes to turn on RFC1323 extensions. log_in_vain="NO" # Disallow bad connection logging (or YES). tcp_keepalive="YES" # Kill dead TCP connections (or NO). network_interfaces="auto" # List of network interfaces (or "auto"). ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. #ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. # # If you have any sppp(4) interfaces above, you might also want to set # the following parameters. Refer to spppcontrol(8) for their meaning. sppp_interfaces="" # List of sppp interfaces. #sppp_interfaces="isp0" # example: sppp over ISDN #spppconfig_isp0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'" ### Network daemon (miscellaneous) & NFS options: ### syslogd_enable="YES" # Run syslog daemon (or NO). syslogd_flags="" # Flags to syslogd (if enabled). inetd_enable="YES" # Run the network daemon dispatcher (or NO). inetd_flags="-wW" # Optional flags to inetd # # named. It may be possible to run named in a sandbox, man security for # details. # named_enable="NO" # Run named, the DNS server (or NO). named_program="named" # path to named, if you want a different one. named_flags="" # Flags for named #named_flags="-u bind -g bind" # Flags for named kerberos_server_enable="NO" # Run a kerberos master server (or NO). kadmind_server_enable="NO" # Run kadmind (or NO) -- do not run on # a slave kerberos server kerberos_stash="" # Is the kerberos master key stashed? rwhod_enable="NO" # Run the rwho daemon (or NO). rwhod_flags="" # Flags for rwhod amd_enable="NO" # Run amd service with $amd_flags (or NO). amd_flags="-a /.amd_mnt -c 1800 -k i386 -d my.domain -l syslog /host /etc/amd.map /net /etc/amd.map" amd_map_program="NO" # Can be set to "ypcat -k amd.master" nfs_client_enable="NO" # This host is an NFS client (or NO). nfs_client_flags="-n 4" # Flags to nfsiod (if enabled). nfs_access_cache="2" # Client cache timeout in seconds nfs_server_enable="NO" # This host is an NFS server (or NO). nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled). mountd_flags="-r" # Flags to mountd (if NFS server enabled). nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO). rpc_lockd_enable="NO" # Run NFS rpc.lockd (*broken!*) if nfs_server. rpc_statd_enable="YES" # Run NFS rpc.statd if nfs_server (or NO). portmap_enable="YES" # Run the portmapper service (or NO). portmap_program="/usr/sbin/portmap" # path to portmap, if you want a different one. portmap_flags="" # Flags to portmap (if enabled). rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO). keyserv_enable="NO" # Run the SecureRPC keyserver (or NO). keyserv_flags="" # Flags to keyserv (if enabled). rarpd_enable="NO" # Run rarpd (or NO). rarpd_flags="" # Flags to rarpd. xtend_enable="NO" # Run the X-10 power controller daemon. xtend_flags="" # Flags to xtend (if enabled). ### Network Time Services options: ### timed_enable="NO" # Run the time daemon (or NO). timed_flags="" # Flags to timed (if enabled). ntpdate_enable="NO" # Run the ntpdate to sync time (or NO). ntpdate_program="ntpdate" # path to ntpdate, if you want a different one. ntpdate_flags="" # Flags to ntpdate (if enabled). xntpd_enable="NO" # Run xntpd Network Time Protocol (or NO). xntpd_program="xntpd" # path to xntpd, if you want a different one. xntpd_flags="-p /var/run/xntpd.pid" # Flags to xntpd (if enabled). # Network Information Services (NIS) options: ### nis_client_enable="NO" # We're an NIS client (or NO). nis_client_flags="" # Flags to ypbind (if enabled). nis_ypset_enable="NO" # Run ypset at boot time (or NO). nis_ypset_flags="" # Flags to ypset (if enabled). nis_server_enable="NO" # We're an NIS server (or NO). nis_server_flags="" # Flags to ypserv (if enabled). nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO). nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled). nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO). nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled). ### Network routing options: ### defaultrouter="NO" # Set to default gateway (or NO). static_routes="" # Set to static route list (or leave empty). gateway_enable="NO" # Set to YES if this host will be a gateway. router_enable="NO" # Set to YES to enable a routing daemon. router="routed" # Name of routing daemon to use if enabled. router_flags="-q" # Flags for routing daemon. mrouted_enable="NO" # Do multicast routing (see /etc/mrouted.conf). mrouted_flags="" # Flags for multicast routing daemon. ipxgateway_enable="NO" # Set to YES to enable IPX routing. ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon. ipxrouted_flags="" # Flags for IPX routing daemon. arpproxy_all="" # replaces obsolete kernel option ARP_PROXYALL. forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES") accept_sourceroute="NO" # accept source routed packets to us ### ATM interface options: ### atm_enable="NO" # Configure ATM interfaces (or NO). #atm_netif_hea0="atm 1" # Network interfaces for physical interface. #atm_sigmgr_hea0="uni31" # Signalling manager for physical interface. #atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI). #atm_macaddr_hea0="NO" # Override physical MAC address (or NO). #atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local). #atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO). atm_pvcs="" # Set to PVC list (or leave empty). atm_arps="" # Set to permanent ARP list (or leave empty). ### ISDN interface options: ### isdn_enable="NO" # Enable the ISDN subsystem (or NO). isdn_fsdev="/dev/ttyv4" # Output device for fullscreen mode (or NO for daemon mode). isdn_flags="-dn -d0x1f9" # Flags for isdnd isdn_trace="NO" # Enable the ISDN trace subsystem (or NO). isdn_traceflags="-f /var/tmp/isdntrace0" # Flags for isdntrace ### Miscellaneous network options: ### icmp_bmcastecho="NO" # respond to broadcast ping packets ############################################################## ### System console options ################################# ############################################################## keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO). keyrate="NO" # keyboard rate to: slow, normal, fast (or NO). keybell="NO" # bell to duration.pitch or normal or visual (or NO). keychange="NO" # function keys default values (or NO). cursor="NO" # cursor type {normal|blink|destructive} (or NO). scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO). font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO). font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO). font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO). blanktime="300" # blank time (in seconds) or "NO" to turn it off. saver="NO" # screen saver: Uses /modules/${saver}_saver.ko moused_enable="NO" # Run the mouse daemon. moused_type="auto" # See man page for rc.conf(5) for available settings. moused_port="/dev/cuaa0" # Set to your mouse port. moused_flags="" # Any additional flags to moused. allscreens_flags="" # Set this vidcontrol mode for all virtual screens ############################################################## ### Miscellaneous administrative options ################### ############################################################## cron_enable="YES" # Run the periodic job daemon. lpd_enable="NO" # Run the line printer daemon. lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one. lpd_flags="" # Flags to lpd (if enabled). usbd_enable="NO" # Run the usbd daemon. usbd_flags="" # Flags to usbd (if enabled). sendmail_enable="YES" # Run the sendmail daemon (or NO). sendmail_flags="-bd -q30m" # Flags to sendmail (if enabled) dumpdev="NO" # Device name to crashdump to (if enabled). enable_quotas="NO" # turn on quotas on startup (or NO). check_quotas="NO" # Check quotas on startup (or NO). accounting_enable="NO" # Turn on process accounting (or NO). ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO). linux_enable="NO" # Linux emulation loaded at startup (or NO). svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO). rand_irqs="NO" # Stir the entropy pool (like "5 11" or NO). clear_tmp_enable="NO" # Clear /tmp at startup. ldconfig_paths="/usr/lib/compat /usr/X11R6/lib /usr/local/lib" # shared library search paths ldconfig_paths_aout="/usr/lib/compat/aout /usr/X11R6/lib/aout /usr/local/lib/aout" # a.out shared library search paths kern_securelevel_enable="NO" # kernel security level (see init(8)), kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure update_motd="YES" # update version info in /etc/motd (or NO) start_vinum="" # set to YES to start vinum vinum_drives="" # put in names of disks containing vinum drives # to start vinum on only specific disks. ############################################################## ### Allow local configuration override at the very end here ## ############################################################## # # for i in ${rc_conf_files}; do if [ -f $i ]; then . $i fi done