# BCM94712LGR DDR board as L2 switch
# Copyright 2006, Broadcom Corporation
# All Rights Reserved.
# 
# THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
# KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
# SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
# FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
# $Id: bcm94712lgr-sw.txt,v 1.1.1.1 2008/10/15 03:25:52 james26_jang Exp $
boardtype=0x0460
boardnum=${serno}
# Board revision 1.0
boardrev=0x10
boardflags=0x0618
sromrev=2

# MIPS clock frequency in MHz
clkfreq=200

# 32 MB DDR SDRAM (16 Meg x 16)
sdram_init=0x000b
sdram_config=0x0062
sdram_refresh=0x0000
sdram_ncdl=0

# Ethernet w/BCM5325E switch
et0macaddr=00:90:4c:88:${maclo}
et0phyaddr=30
et0mdcport=0

# BCM5325E switch reset
gpio6=robo_reset

# Make the d11 i/f single band
wl0id=0x4320

# 4712 802.11g parameters
il0macaddr=00:90:4c:89:${maclo}
aa0=3
ag0=2
pa0maxpwr=60
pa0itssit=62
pa0b0=0x1599
pa0b1=0xfad3
pa0b2=0xfed4

# Commons wireless parameters
cctl=0
ccode=0

# Bootlaoder variables
dl_ram_addr=a0001000
os_ram_addr=80001000
os_flash_addr=bfc40000
lan_ipaddr=192.168.1.1
lan_netmask=255.255.255.0
scratch=a0180000
boot_wait=on

# Watchdog timer in ms
watchdog=3000

# Bootloader and OS glue
landevs=et0 wl0
wandevs=