# bcm94712agsdio board
# Copyright 2006, Broadcom Corporation
# All Rights Reserved.
# 
# THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
# KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
# SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
# FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
# $Id: bcm94712agsdio.txt,v 1.1.1.1 2008/10/15 03:25:52 james26_jang Exp $
boardtype=0x047b
boardnum=${serno}
# Board revision 1.2
boardrev=0x12
boardflags=0x0a08
sromrev=2

# MIPS clock frequency in MHz
clkfreq=200

# 64 MB DDR SDRAM (4 Meg x 16 x 2)
sdram_init=0x0009
sdram_config=0x0062
sdram_refresh=0x0000
sdram_ncdl=0

# Ethernet Phy
et0macaddr=00:90:4c:a7:${maclo}
et0phyaddr=01
et0mdcport=0

# No eth1
et1phyaddr=0x1f

# Make the d11 i/f dual band
wl0id=0x4319

# 4712 802.11g parameters
il0macaddr=00:90:4c:a8:${maclo}
aa0=3
ag0=2
pa0maxpwr=74
pa0itssit=62
pa0b0=0x1691
pa0b1=0xfa77
pa0b2=0xfe8a

# 4320 802.11a parameters
et1macaddr=00:90:4c:a9:${maclo}
aa1=2
ag1=2
pa1itssit=120
pa1lomaxpwr=60
pa1lob0=0x1825
pa1lob1=0xfcf2
pa1lob2=0xff65
pa1maxpwr=60
pa1b0=0x1b49
pa1b1=0xfcb1
pa1b2=0xff9e
pa1himaxpwr=60
pa1hib0=0x1a8f
pa1hib1=0xfcb7
pa1hib2=0xff89

# Commons wireless parameters
cctl=0
ccode=0

# Bootlaoder variables
boot_wait=on
reset_gpio=7

# Watchdog timer in ms
watchdog=3000