# BCM94710DEV board
# Copyright 2006, Broadcom Corporation
# All Rights Reserved.                
#                                     
# This is UNPUBLISHED PROPRIETARY SOURCE CODE of Broadcom Corporation;   
# the contents of this file may not be disclosed to third parties, copied
# or duplicated in any form, in whole or in part, without the prior      
# written permission of Broadcom Corporation.                            
# $Id: bcm94710dev.txt,v 1.1.1.1 2008/10/15 03:25:52 james26_jang Exp $
boardtype=bcm94710dev
boardnum=${serno}

# 4710 CPU clock frequency in Mhz
# Only valid value is 125, anything else defaults to 100Mhz
clkfreq=125

# 4710 SDRAM controller parameters
sdram_init=0x0419
sdram_config=0x0000
sdram_refresh=0x8040
sdram_ncdl=0

# 4710 MAC and PHY parameters
il0macaddr=00:90:4c:20:${maclo}
et0macaddr=00:90:4c:21:${maclo}
et0phyaddr=6
et0mdcport=0
et1macaddr=00:90:4c:22:${maclo}
et1phyaddr=7
et1mdcport=1

# PMON variables
dl_ram_addr=a0001000
os_ram_addr=80001000
os_flash_addr=bfc40000
lan_ipaddr=192.168.1.1
lan_netmask=255.255.255.0
scratch=a0180000
boot_wait=on

# watchdog set to 3 sec
watchdog=3000