# 4705 board with 5397 switch
boardtype=0x478
boardnum=${serno}
# Board revision 1.0
boardrev=0x10
# ENETVLAN, ENETROBO.
boardflags=0x110

# MIPS clock frequency in MHz
clkfreq=300

# 64 MB DDR SDRAM (16 Meg x 16 x 2)
sdram_init=0x0009
sdram_config=0x0062
sdram_refresh=0x0000
sdram_ncdl=0

# Ethernet 
et0macaddr=00:90:4c:a6:${maclo}
et0phyaddr=30
et0mdcport=0

# Watchdog timer in ms
watchdog=3000

# Reset 
reset_gpio=7

# Variables used by CFE and run-time OS image
# which may be modified by the run-time OS image
lan_ipaddr=192.168.1.1
lan_netmask=255.255.255.0

# PCI specific
cardbus=1

# Ethernet switch config (vlan1:LAN, vlan2:WAN)
vlan1ports=1 2 3 4 8*
vlan1hwname=et0
vlan2ports=0 8u

# bootloader/OS glue
landevs=vlan1 wl0
wandevs=et0
lan_ipaddr=192.168.1.1
lan_netmask=255.255.255.0

# CFE variables
boot_wait=on
wait_time=5