e1000_api.c (169248) | e1000_api.c (169589) |
---|---|
1/******************************************************************************* 2 3 Copyright (c) 2001-2007, Intel Corporation 4 All rights reserved. 5 6 Redistribution and use in source and binary forms, with or without 7 modification, are permitted provided that the following conditions are met: 8 --- 16 unchanged lines hidden (view full) --- 25 CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26 SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27 INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28 CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29 ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 30 POSSIBILITY OF SUCH DAMAGE. 31 32*******************************************************************************/ | 1/******************************************************************************* 2 3 Copyright (c) 2001-2007, Intel Corporation 4 All rights reserved. 5 6 Redistribution and use in source and binary forms, with or without 7 modification, are permitted provided that the following conditions are met: 8 --- 16 unchanged lines hidden (view full) --- 25 CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26 SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27 INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28 CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29 ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 30 POSSIBILITY OF SUCH DAMAGE. 31 32*******************************************************************************/ |
33/*$FreeBSD: head/sys/dev/em/e1000_api.c 169589 2007-05-16 00:14:23Z jfv $*/ |
|
33 | 34 |
34#include <sys/cdefs.h> 35__FBSDID("$FreeBSD: head/sys/dev/em/e1000_api.c 169248 2007-05-04 13:30:44Z rwatson $"); | |
36 | 35 |
37 | 36#include "e1000_api.h" |
38#include "e1000_mac.h" 39#include "e1000_nvm.h" 40#include "e1000_phy.h" 41 42#ifndef NO_82542_SUPPORT 43extern void e1000_init_function_pointers_82542(struct e1000_hw *hw); 44#endif 45extern void e1000_init_function_pointers_82543(struct e1000_hw *hw); 46extern void e1000_init_function_pointers_82540(struct e1000_hw *hw); 47extern void e1000_init_function_pointers_82571(struct e1000_hw *hw); 48extern void e1000_init_function_pointers_82541(struct e1000_hw *hw); 49extern void e1000_init_function_pointers_80003es2lan(struct e1000_hw *hw); 50extern void e1000_init_function_pointers_ich8lan(struct e1000_hw *hw); 51extern void e1000_init_function_pointers_82575(struct e1000_hw *hw); 52 53/** 54 * e1000_init_mac_params - Initialize MAC function pointers | 37#include "e1000_mac.h" 38#include "e1000_nvm.h" 39#include "e1000_phy.h" 40 41#ifndef NO_82542_SUPPORT 42extern void e1000_init_function_pointers_82542(struct e1000_hw *hw); 43#endif 44extern void e1000_init_function_pointers_82543(struct e1000_hw *hw); 45extern void e1000_init_function_pointers_82540(struct e1000_hw *hw); 46extern void e1000_init_function_pointers_82571(struct e1000_hw *hw); 47extern void e1000_init_function_pointers_82541(struct e1000_hw *hw); 48extern void e1000_init_function_pointers_80003es2lan(struct e1000_hw *hw); 49extern void e1000_init_function_pointers_ich8lan(struct e1000_hw *hw); 50extern void e1000_init_function_pointers_82575(struct e1000_hw *hw); 51 52/** 53 * e1000_init_mac_params - Initialize MAC function pointers |
55 * @hw - pointer to the HW structure | 54 * @hw: pointer to the HW structure |
56 * 57 * This function initializes the function pointers for the MAC 58 * set of functions. Called by drivers or by e1000_setup_init_funcs. 59 **/ 60s32 61e1000_init_mac_params(struct e1000_hw *hw) 62{ 63 s32 ret_val = E1000_SUCCESS; --- 10 unchanged lines hidden (view full) --- 74 } 75 76out: 77 return ret_val; 78} 79 80/** 81 * e1000_init_nvm_params - Initialize NVM function pointers | 55 * 56 * This function initializes the function pointers for the MAC 57 * set of functions. Called by drivers or by e1000_setup_init_funcs. 58 **/ 59s32 60e1000_init_mac_params(struct e1000_hw *hw) 61{ 62 s32 ret_val = E1000_SUCCESS; --- 10 unchanged lines hidden (view full) --- 73 } 74 75out: 76 return ret_val; 77} 78 79/** 80 * e1000_init_nvm_params - Initialize NVM function pointers |
82 * @hw - pointer to the HW structure | 81 * @hw: pointer to the HW structure |
83 * 84 * This function initializes the function pointers for the NVM 85 * set of functions. Called by drivers or by e1000_setup_init_funcs. 86 **/ 87s32 88e1000_init_nvm_params(struct e1000_hw *hw) 89{ 90 s32 ret_val = E1000_SUCCESS; --- 10 unchanged lines hidden (view full) --- 101 } 102 103out: 104 return ret_val; 105} 106 107/** 108 * e1000_init_phy_params - Initialize PHY function pointers | 82 * 83 * This function initializes the function pointers for the NVM 84 * set of functions. Called by drivers or by e1000_setup_init_funcs. 85 **/ 86s32 87e1000_init_nvm_params(struct e1000_hw *hw) 88{ 89 s32 ret_val = E1000_SUCCESS; --- 10 unchanged lines hidden (view full) --- 100 } 101 102out: 103 return ret_val; 104} 105 106/** 107 * e1000_init_phy_params - Initialize PHY function pointers |
109 * @hw - pointer to the HW structure | 108 * @hw: pointer to the HW structure |
110 * 111 * This function initializes the function pointers for the PHY 112 * set of functions. Called by drivers or by e1000_setup_init_funcs. 113 **/ 114s32 115e1000_init_phy_params(struct e1000_hw *hw) 116{ 117 s32 ret_val = E1000_SUCCESS; --- 10 unchanged lines hidden (view full) --- 128 } 129 130out: 131 return ret_val; 132} 133 134/** 135 * e1000_set_mac_type - Sets MAC type | 109 * 110 * This function initializes the function pointers for the PHY 111 * set of functions. Called by drivers or by e1000_setup_init_funcs. 112 **/ 113s32 114e1000_init_phy_params(struct e1000_hw *hw) 115{ 116 s32 ret_val = E1000_SUCCESS; --- 10 unchanged lines hidden (view full) --- 127 } 128 129out: 130 return ret_val; 131} 132 133/** 134 * e1000_set_mac_type - Sets MAC type |
136 * @hw - pointer to the HW structure | 135 * @hw: pointer to the HW structure |
137 * 138 * This function sets the mac type of the adapter based on the 139 * device ID stored in the hw structure. 140 * MUST BE FIRST FUNCTION CALLED (explicitly or through 141 * e1000_setup_init_funcs()). 142 **/ 143s32 144e1000_set_mac_type(struct e1000_hw *hw) --- 64 unchanged lines hidden (view full) --- 209 mac->type = e1000_82547; 210 break; 211 case E1000_DEV_ID_82547GI: 212 mac->type = e1000_82547_rev_2; 213 break; 214 case E1000_DEV_ID_82571EB_COPPER: 215 case E1000_DEV_ID_82571EB_FIBER: 216 case E1000_DEV_ID_82571EB_SERDES: | 136 * 137 * This function sets the mac type of the adapter based on the 138 * device ID stored in the hw structure. 139 * MUST BE FIRST FUNCTION CALLED (explicitly or through 140 * e1000_setup_init_funcs()). 141 **/ 142s32 143e1000_set_mac_type(struct e1000_hw *hw) --- 64 unchanged lines hidden (view full) --- 208 mac->type = e1000_82547; 209 break; 210 case E1000_DEV_ID_82547GI: 211 mac->type = e1000_82547_rev_2; 212 break; 213 case E1000_DEV_ID_82571EB_COPPER: 214 case E1000_DEV_ID_82571EB_FIBER: 215 case E1000_DEV_ID_82571EB_SERDES: |
216 case E1000_DEV_ID_82571EB_SERDES_DUAL: 217 case E1000_DEV_ID_82571EB_SERDES_QUAD: |
|
217 case E1000_DEV_ID_82571EB_QUAD_COPPER: 218 case E1000_DEV_ID_82571EB_QUAD_FIBER: 219 case E1000_DEV_ID_82571EB_QUAD_COPPER_LP: 220 mac->type = e1000_82571; 221 break; 222 case E1000_DEV_ID_82572EI: 223 case E1000_DEV_ID_82572EI_COPPER: 224 case E1000_DEV_ID_82572EI_FIBER: --- 40 unchanged lines hidden (view full) --- 265 break; 266 } 267 268 return ret_val; 269} 270 271/** 272 * e1000_setup_init_funcs - Initializes function pointers | 218 case E1000_DEV_ID_82571EB_QUAD_COPPER: 219 case E1000_DEV_ID_82571EB_QUAD_FIBER: 220 case E1000_DEV_ID_82571EB_QUAD_COPPER_LP: 221 mac->type = e1000_82571; 222 break; 223 case E1000_DEV_ID_82572EI: 224 case E1000_DEV_ID_82572EI_COPPER: 225 case E1000_DEV_ID_82572EI_FIBER: --- 40 unchanged lines hidden (view full) --- 266 break; 267 } 268 269 return ret_val; 270} 271 272/** 273 * e1000_setup_init_funcs - Initializes function pointers |
273 * @hw - pointer to the HW structure 274 * @init_device - TRUE will initialize the rest of the function pointers | 274 * @hw: pointer to the HW structure 275 * @init_device: TRUE will initialize the rest of the function pointers |
275 * getting the device ready for use. FALSE will only set 276 * MAC type and the function pointers for the other init 277 * functions. Passing FALSE will not generate any hardware 278 * reads or writes. 279 * 280 * This function must be called by a driver in order to use the rest 281 * of the 'shared' code files. Called by drivers only. 282 **/ --- 96 unchanged lines hidden (view full) --- 379 } 380 381out: 382 return ret_val; 383} 384 385/** 386 * e1000_remove_device - Free device specific structure | 276 * getting the device ready for use. FALSE will only set 277 * MAC type and the function pointers for the other init 278 * functions. Passing FALSE will not generate any hardware 279 * reads or writes. 280 * 281 * This function must be called by a driver in order to use the rest 282 * of the 'shared' code files. Called by drivers only. 283 **/ --- 96 unchanged lines hidden (view full) --- 380 } 381 382out: 383 return ret_val; 384} 385 386/** 387 * e1000_remove_device - Free device specific structure |
387 * @hw - pointer to the HW structure | 388 * @hw: pointer to the HW structure |
388 * 389 * If a device specific structure was allocated, this function will 390 * free it. This is a function pointer entry point called by drivers. 391 **/ 392void 393e1000_remove_device(struct e1000_hw *hw) 394{ 395 if (hw->func.remove_device != NULL) 396 hw->func.remove_device(hw); 397} 398 399/** 400 * e1000_get_bus_info - Obtain bus information for adapter | 389 * 390 * If a device specific structure was allocated, this function will 391 * free it. This is a function pointer entry point called by drivers. 392 **/ 393void 394e1000_remove_device(struct e1000_hw *hw) 395{ 396 if (hw->func.remove_device != NULL) 397 hw->func.remove_device(hw); 398} 399 400/** 401 * e1000_get_bus_info - Obtain bus information for adapter |
401 * @hw - pointer to the HW structure | 402 * @hw: pointer to the HW structure |
402 * 403 * This will obtain information about the HW bus for which the 404 * adaper is attached and stores it in the hw structure. This is a 405 * function pointer entry point called by drivers. 406 **/ 407s32 408e1000_get_bus_info(struct e1000_hw *hw) 409{ 410 if (hw->func.get_bus_info != NULL) 411 return hw->func.get_bus_info(hw); 412 else 413 return E1000_SUCCESS; 414} 415 416/** 417 * e1000_clear_vfta - Clear VLAN filter table | 403 * 404 * This will obtain information about the HW bus for which the 405 * adaper is attached and stores it in the hw structure. This is a 406 * function pointer entry point called by drivers. 407 **/ 408s32 409e1000_get_bus_info(struct e1000_hw *hw) 410{ 411 if (hw->func.get_bus_info != NULL) 412 return hw->func.get_bus_info(hw); 413 else 414 return E1000_SUCCESS; 415} 416 417/** 418 * e1000_clear_vfta - Clear VLAN filter table |
418 * @hw - pointer to the HW structure | 419 * @hw: pointer to the HW structure |
419 * 420 * This clears the VLAN filter table on the adapter. This is a function 421 * pointer entry point called by drivers. 422 **/ 423void 424e1000_clear_vfta(struct e1000_hw *hw) 425{ 426 if (hw->func.clear_vfta != NULL) 427 hw->func.clear_vfta (hw); 428} 429 430/** 431 * e1000_write_vfta - Write value to VLAN filter table | 420 * 421 * This clears the VLAN filter table on the adapter. This is a function 422 * pointer entry point called by drivers. 423 **/ 424void 425e1000_clear_vfta(struct e1000_hw *hw) 426{ 427 if (hw->func.clear_vfta != NULL) 428 hw->func.clear_vfta (hw); 429} 430 431/** 432 * e1000_write_vfta - Write value to VLAN filter table |
432 * @hw - pointer to the HW structure 433 * @offset - the 32-bit offset in which to write the value to. 434 * @value - the 32-bit value to write at location offset. | 433 * @hw: pointer to the HW structure 434 * @offset: the 32-bit offset in which to write the value to. 435 * @value: the 32-bit value to write at location offset. |
435 * 436 * This writes a 32-bit value to a 32-bit offset in the VLAN filter 437 * table. This is a function pointer entry point called by drivers. 438 **/ 439void 440e1000_write_vfta(struct e1000_hw *hw, u32 offset, u32 value) 441{ 442 if (hw->func.write_vfta != NULL) 443 hw->func.write_vfta(hw, offset, value); 444} 445 446/** 447 * e1000_mc_addr_list_update - Update Multicast addresses | 436 * 437 * This writes a 32-bit value to a 32-bit offset in the VLAN filter 438 * table. This is a function pointer entry point called by drivers. 439 **/ 440void 441e1000_write_vfta(struct e1000_hw *hw, u32 offset, u32 value) 442{ 443 if (hw->func.write_vfta != NULL) 444 hw->func.write_vfta(hw, offset, value); 445} 446 447/** 448 * e1000_mc_addr_list_update - Update Multicast addresses |
448 * @hw - pointer to the HW structure 449 * @mc_addr_list - array of multicast addresses to program 450 * @mc_addr_count - number of multicast addresses to program 451 * @rar_used_count - the first RAR register free to program 452 * @rar_count - total number of supported Receive Address Registers | 449 * @hw: pointer to the HW structure 450 * @mc_addr_list: array of multicast addresses to program 451 * @mc_addr_count: number of multicast addresses to program 452 * @rar_used_count: the first RAR register free to program 453 * @rar_count: total number of supported Receive Address Registers |
453 * 454 * Updates the Receive Address Registers and Multicast Table Array. 455 * The caller must have a packed mc_addr_list of multicast addresses. 456 * The parameter rar_count will usually be hw->mac.rar_entry_count 457 * unless there are workarounds that change this. Currently no func pointer 458 * exists and all implementations are handled in the generic version of this 459 * function. 460 **/ --- 9 unchanged lines hidden (view full) --- 470 mc_addr_list, 471 mc_addr_count, 472 rar_used_count, 473 rar_count); 474} 475 476/** 477 * e1000_force_mac_fc - Force MAC flow control | 454 * 455 * Updates the Receive Address Registers and Multicast Table Array. 456 * The caller must have a packed mc_addr_list of multicast addresses. 457 * The parameter rar_count will usually be hw->mac.rar_entry_count 458 * unless there are workarounds that change this. Currently no func pointer 459 * exists and all implementations are handled in the generic version of this 460 * function. 461 **/ --- 9 unchanged lines hidden (view full) --- 471 mc_addr_list, 472 mc_addr_count, 473 rar_used_count, 474 rar_count); 475} 476 477/** 478 * e1000_force_mac_fc - Force MAC flow control |
478 * @hw - pointer to the HW structure | 479 * @hw: pointer to the HW structure |
479 * 480 * Force the MAC's flow control settings. Currently no func pointer exists 481 * and all implementations are handled in the generic version of this 482 * function. 483 **/ 484s32 485e1000_force_mac_fc(struct e1000_hw *hw) 486{ 487 return e1000_force_mac_fc_generic(hw); 488} 489 490/** 491 * e1000_check_for_link - Check/Store link connection | 480 * 481 * Force the MAC's flow control settings. Currently no func pointer exists 482 * and all implementations are handled in the generic version of this 483 * function. 484 **/ 485s32 486e1000_force_mac_fc(struct e1000_hw *hw) 487{ 488 return e1000_force_mac_fc_generic(hw); 489} 490 491/** 492 * e1000_check_for_link - Check/Store link connection |
492 * @hw - pointer to the HW structure | 493 * @hw: pointer to the HW structure |
493 * 494 * This checks the link condition of the adapter and stores the 495 * results in the hw->mac structure. This is a function pointer entry 496 * point called by drivers. 497 **/ 498s32 499e1000_check_for_link(struct e1000_hw *hw) 500{ 501 if (hw->func.check_for_link != NULL) 502 return hw->func.check_for_link(hw); 503 else 504 return -E1000_ERR_CONFIG; 505} 506 507/** 508 * e1000_check_mng_mode - Check management mode | 494 * 495 * This checks the link condition of the adapter and stores the 496 * results in the hw->mac structure. This is a function pointer entry 497 * point called by drivers. 498 **/ 499s32 500e1000_check_for_link(struct e1000_hw *hw) 501{ 502 if (hw->func.check_for_link != NULL) 503 return hw->func.check_for_link(hw); 504 else 505 return -E1000_ERR_CONFIG; 506} 507 508/** 509 * e1000_check_mng_mode - Check management mode |
509 * @hw - pointer to the HW structure | 510 * @hw: pointer to the HW structure |
510 * 511 * This checks if the adapter has manageability enabled. 512 * This is a function pointer entry point called by drivers. 513 **/ 514boolean_t 515e1000_check_mng_mode(struct e1000_hw *hw) 516{ 517 if (hw->func.check_mng_mode != NULL) 518 return hw->func.check_mng_mode(hw); 519 else 520 return FALSE; 521} 522 523/** 524 * e1000_mng_write_dhcp_info - Writes DHCP info to host interface | 511 * 512 * This checks if the adapter has manageability enabled. 513 * This is a function pointer entry point called by drivers. 514 **/ 515boolean_t 516e1000_check_mng_mode(struct e1000_hw *hw) 517{ 518 if (hw->func.check_mng_mode != NULL) 519 return hw->func.check_mng_mode(hw); 520 else 521 return FALSE; 522} 523 524/** 525 * e1000_mng_write_dhcp_info - Writes DHCP info to host interface |
525 * @hw - pointer to the HW structure 526 * @buffer - pointer to the host interface 527 * @length - size of the buffer | 526 * @hw: pointer to the HW structure 527 * @buffer: pointer to the host interface 528 * @length: size of the buffer |
528 * 529 * Writes the DHCP information to the host interface. 530 **/ 531s32 532e1000_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer, u16 length) 533{ 534 return e1000_mng_write_dhcp_info_generic(hw, buffer, length); 535} 536 537/** 538 * e1000_reset_hw - Reset hardware | 529 * 530 * Writes the DHCP information to the host interface. 531 **/ 532s32 533e1000_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer, u16 length) 534{ 535 return e1000_mng_write_dhcp_info_generic(hw, buffer, length); 536} 537 538/** 539 * e1000_reset_hw - Reset hardware |
539 * @hw - pointer to the HW structure | 540 * @hw: pointer to the HW structure |
540 * 541 * This resets the hardware into a known state. This is a function pointer 542 * entry point called by drivers. 543 **/ 544s32 545e1000_reset_hw(struct e1000_hw *hw) 546{ 547 if (hw->func.reset_hw != NULL) 548 return hw->func.reset_hw(hw); 549 else 550 return -E1000_ERR_CONFIG; 551} 552 553/** 554 * e1000_init_hw - Initialize hardware | 541 * 542 * This resets the hardware into a known state. This is a function pointer 543 * entry point called by drivers. 544 **/ 545s32 546e1000_reset_hw(struct e1000_hw *hw) 547{ 548 if (hw->func.reset_hw != NULL) 549 return hw->func.reset_hw(hw); 550 else 551 return -E1000_ERR_CONFIG; 552} 553 554/** 555 * e1000_init_hw - Initialize hardware |
555 * @hw - pointer to the HW structure | 556 * @hw: pointer to the HW structure |
556 * 557 * This inits the hardware readying it for operation. This is a function 558 * pointer entry point called by drivers. 559 **/ 560s32 561e1000_init_hw(struct e1000_hw *hw) 562{ 563 if (hw->func.init_hw != NULL) 564 return hw->func.init_hw(hw); 565 else 566 return -E1000_ERR_CONFIG; 567} 568 569/** 570 * e1000_setup_link - Configures link and flow control | 557 * 558 * This inits the hardware readying it for operation. This is a function 559 * pointer entry point called by drivers. 560 **/ 561s32 562e1000_init_hw(struct e1000_hw *hw) 563{ 564 if (hw->func.init_hw != NULL) 565 return hw->func.init_hw(hw); 566 else 567 return -E1000_ERR_CONFIG; 568} 569 570/** 571 * e1000_setup_link - Configures link and flow control |
571 * @hw - pointer to the HW structure | 572 * @hw: pointer to the HW structure |
572 * 573 * This configures link and flow control settings for the adapter. This 574 * is a function pointer entry point called by drivers. While modules can 575 * also call this, they probably call their own version of this function. 576 **/ 577s32 578e1000_setup_link(struct e1000_hw *hw) 579{ 580 if (hw->func.setup_link != NULL) 581 return hw->func.setup_link(hw); 582 else 583 return -E1000_ERR_CONFIG; 584} 585 586/** 587 * e1000_get_speed_and_duplex - Returns current speed and duplex | 573 * 574 * This configures link and flow control settings for the adapter. This 575 * is a function pointer entry point called by drivers. While modules can 576 * also call this, they probably call their own version of this function. 577 **/ 578s32 579e1000_setup_link(struct e1000_hw *hw) 580{ 581 if (hw->func.setup_link != NULL) 582 return hw->func.setup_link(hw); 583 else 584 return -E1000_ERR_CONFIG; 585} 586 587/** 588 * e1000_get_speed_and_duplex - Returns current speed and duplex |
588 * @hw - pointer to the HW structure 589 * @speed - pointer to a 16-bit value to store the speed 590 * @duplex - pointer to a 16-bit value to store the duplex. | 589 * @hw: pointer to the HW structure 590 * @speed: pointer to a 16-bit value to store the speed 591 * @duplex: pointer to a 16-bit value to store the duplex. |
591 * 592 * This returns the speed and duplex of the adapter in the two 'out' 593 * variables passed in. This is a function pointer entry point called 594 * by drivers. 595 **/ 596s32 597e1000_get_speed_and_duplex(struct e1000_hw *hw, u16 *speed, u16 *duplex) 598{ 599 if (hw->func.get_link_up_info != NULL) 600 return hw->func.get_link_up_info(hw, speed, duplex); 601 else 602 return -E1000_ERR_CONFIG; 603} 604 605/** 606 * e1000_setup_led - Configures SW controllable LED | 592 * 593 * This returns the speed and duplex of the adapter in the two 'out' 594 * variables passed in. This is a function pointer entry point called 595 * by drivers. 596 **/ 597s32 598e1000_get_speed_and_duplex(struct e1000_hw *hw, u16 *speed, u16 *duplex) 599{ 600 if (hw->func.get_link_up_info != NULL) 601 return hw->func.get_link_up_info(hw, speed, duplex); 602 else 603 return -E1000_ERR_CONFIG; 604} 605 606/** 607 * e1000_setup_led - Configures SW controllable LED |
607 * @hw - pointer to the HW structure | 608 * @hw: pointer to the HW structure |
608 * 609 * This prepares the SW controllable LED for use and saves the current state 610 * of the LED so it can be later restored. This is a function pointer entry 611 * point called by drivers. 612 **/ 613s32 614e1000_setup_led(struct e1000_hw *hw) 615{ 616 if (hw->func.setup_led != NULL) 617 return hw->func.setup_led(hw); 618 else 619 return E1000_SUCCESS; 620} 621 622/** 623 * e1000_cleanup_led - Restores SW controllable LED | 609 * 610 * This prepares the SW controllable LED for use and saves the current state 611 * of the LED so it can be later restored. This is a function pointer entry 612 * point called by drivers. 613 **/ 614s32 615e1000_setup_led(struct e1000_hw *hw) 616{ 617 if (hw->func.setup_led != NULL) 618 return hw->func.setup_led(hw); 619 else 620 return E1000_SUCCESS; 621} 622 623/** 624 * e1000_cleanup_led - Restores SW controllable LED |
624 * @hw - pointer to the HW structure | 625 * @hw: pointer to the HW structure |
625 * 626 * This restores the SW controllable LED to the value saved off by 627 * e1000_setup_led. This is a function pointer entry point called by drivers. 628 **/ 629s32 630e1000_cleanup_led(struct e1000_hw *hw) 631{ 632 if (hw->func.cleanup_led != NULL) 633 return hw->func.cleanup_led(hw); 634 else 635 return E1000_SUCCESS; 636} 637 638/** 639 * e1000_blink_led - Blink SW controllable LED | 626 * 627 * This restores the SW controllable LED to the value saved off by 628 * e1000_setup_led. This is a function pointer entry point called by drivers. 629 **/ 630s32 631e1000_cleanup_led(struct e1000_hw *hw) 632{ 633 if (hw->func.cleanup_led != NULL) 634 return hw->func.cleanup_led(hw); 635 else 636 return E1000_SUCCESS; 637} 638 639/** 640 * e1000_blink_led - Blink SW controllable LED |
640 * @hw - pointer to the HW structure | 641 * @hw: pointer to the HW structure |
641 * 642 * This starts the adapter LED blinking. Request the LED to be setup first 643 * and cleaned up after. This is a function pointer entry point called by 644 * drivers. 645 **/ 646s32 647e1000_blink_led(struct e1000_hw *hw) 648{ 649 if (hw->func.blink_led != NULL) 650 return hw->func.blink_led(hw); 651 else 652 return E1000_SUCCESS; 653} 654 655/** 656 * e1000_led_on - Turn on SW controllable LED | 642 * 643 * This starts the adapter LED blinking. Request the LED to be setup first 644 * and cleaned up after. This is a function pointer entry point called by 645 * drivers. 646 **/ 647s32 648e1000_blink_led(struct e1000_hw *hw) 649{ 650 if (hw->func.blink_led != NULL) 651 return hw->func.blink_led(hw); 652 else 653 return E1000_SUCCESS; 654} 655 656/** 657 * e1000_led_on - Turn on SW controllable LED |
657 * @hw - pointer to the HW structure | 658 * @hw: pointer to the HW structure |
658 * 659 * Turns the SW defined LED on. This is a function pointer entry point 660 * called by drivers. 661 **/ 662s32 663e1000_led_on(struct e1000_hw *hw) 664{ 665 if (hw->func.led_on != NULL) 666 return hw->func.led_on(hw); 667 else 668 return E1000_SUCCESS; 669} 670 671/** 672 * e1000_led_off - Turn off SW controllable LED | 659 * 660 * Turns the SW defined LED on. This is a function pointer entry point 661 * called by drivers. 662 **/ 663s32 664e1000_led_on(struct e1000_hw *hw) 665{ 666 if (hw->func.led_on != NULL) 667 return hw->func.led_on(hw); 668 else 669 return E1000_SUCCESS; 670} 671 672/** 673 * e1000_led_off - Turn off SW controllable LED |
673 * @hw - pointer to the HW structure | 674 * @hw: pointer to the HW structure |
674 * 675 * Turns the SW defined LED off. This is a function pointer entry point 676 * called by drivers. 677 **/ 678s32 679e1000_led_off(struct e1000_hw *hw) 680{ 681 if (hw->func.led_off != NULL) 682 return hw->func.led_off(hw); 683 else 684 return E1000_SUCCESS; 685} 686 687/** 688 * e1000_reset_adaptive - Reset adaptive IFS | 675 * 676 * Turns the SW defined LED off. This is a function pointer entry point 677 * called by drivers. 678 **/ 679s32 680e1000_led_off(struct e1000_hw *hw) 681{ 682 if (hw->func.led_off != NULL) 683 return hw->func.led_off(hw); 684 else 685 return E1000_SUCCESS; 686} 687 688/** 689 * e1000_reset_adaptive - Reset adaptive IFS |
689 * @hw - pointer to the HW structure | 690 * @hw: pointer to the HW structure |
690 * 691 * Resets the adaptive IFS. Currently no func pointer exists and all 692 * implementations are handled in the generic version of this function. 693 **/ 694void 695e1000_reset_adaptive(struct e1000_hw *hw) 696{ 697 e1000_reset_adaptive_generic(hw); 698} 699 700/** 701 * e1000_update_adaptive - Update adaptive IFS | 691 * 692 * Resets the adaptive IFS. Currently no func pointer exists and all 693 * implementations are handled in the generic version of this function. 694 **/ 695void 696e1000_reset_adaptive(struct e1000_hw *hw) 697{ 698 e1000_reset_adaptive_generic(hw); 699} 700 701/** 702 * e1000_update_adaptive - Update adaptive IFS |
702 * @hw - pointer to the HW structure | 703 * @hw: pointer to the HW structure |
703 * 704 * Updates adapter IFS. Currently no func pointer exists and all 705 * implementations are handled in the generic version of this function. 706 **/ 707void 708e1000_update_adaptive(struct e1000_hw *hw) 709{ 710 e1000_update_adaptive_generic(hw); 711} 712 713/** 714 * e1000_disable_pcie_master - Disable PCI-Express master access | 704 * 705 * Updates adapter IFS. Currently no func pointer exists and all 706 * implementations are handled in the generic version of this function. 707 **/ 708void 709e1000_update_adaptive(struct e1000_hw *hw) 710{ 711 e1000_update_adaptive_generic(hw); 712} 713 714/** 715 * e1000_disable_pcie_master - Disable PCI-Express master access |
715 * @hw - pointer to the HW structure | 716 * @hw: pointer to the HW structure |
716 * 717 * Disables PCI-Express master access and verifies there are no pending 718 * requests. Currently no func pointer exists and all implementations are 719 * handled in the generic version of this function. 720 **/ 721s32 722e1000_disable_pcie_master(struct e1000_hw *hw) 723{ 724 return e1000_disable_pcie_master_generic(hw); 725} 726 727/** 728 * e1000_config_collision_dist - Configure collision distance | 717 * 718 * Disables PCI-Express master access and verifies there are no pending 719 * requests. Currently no func pointer exists and all implementations are 720 * handled in the generic version of this function. 721 **/ 722s32 723e1000_disable_pcie_master(struct e1000_hw *hw) 724{ 725 return e1000_disable_pcie_master_generic(hw); 726} 727 728/** 729 * e1000_config_collision_dist - Configure collision distance |
729 * @hw - pointer to the HW structure | 730 * @hw: pointer to the HW structure |
730 * 731 * Configures the collision distance to the default value and is used 732 * during link setup. 733 **/ 734void 735e1000_config_collision_dist(struct e1000_hw *hw) 736{ 737 if (hw->func.config_collision_dist != NULL) 738 hw->func.config_collision_dist(hw); 739} 740 741/** 742 * e1000_rar_set - Sets a receive address register | 731 * 732 * Configures the collision distance to the default value and is used 733 * during link setup. 734 **/ 735void 736e1000_config_collision_dist(struct e1000_hw *hw) 737{ 738 if (hw->func.config_collision_dist != NULL) 739 hw->func.config_collision_dist(hw); 740} 741 742/** 743 * e1000_rar_set - Sets a receive address register |
743 * @hw - pointer to the HW structure 744 * @addr - address to set the RAR to 745 * @index - the RAR to set | 744 * @hw: pointer to the HW structure 745 * @addr: address to set the RAR to 746 * @index: the RAR to set |
746 * 747 * Sets a Receive Address Register (RAR) to the specified address. 748 **/ 749void 750e1000_rar_set(struct e1000_hw *hw, u8 *addr, u32 index) 751{ 752 if (hw->func.rar_set != NULL) 753 hw->func.rar_set(hw, addr, index); 754} 755 756/** 757 * e1000_validate_mdi_setting - Ensures valid MDI/MDIX SW state | 747 * 748 * Sets a Receive Address Register (RAR) to the specified address. 749 **/ 750void 751e1000_rar_set(struct e1000_hw *hw, u8 *addr, u32 index) 752{ 753 if (hw->func.rar_set != NULL) 754 hw->func.rar_set(hw, addr, index); 755} 756 757/** 758 * e1000_validate_mdi_setting - Ensures valid MDI/MDIX SW state |
758 * @hw - pointer to the HW structure | 759 * @hw: pointer to the HW structure |
759 * 760 * Ensures that the MDI/MDIX SW state is valid. 761 **/ 762s32 763e1000_validate_mdi_setting(struct e1000_hw *hw) 764{ 765 if (hw->func.validate_mdi_setting != NULL) 766 return hw->func.validate_mdi_setting(hw); 767 else 768 return E1000_SUCCESS; 769} 770 771/** 772 * e1000_mta_set - Sets multicast table bit | 760 * 761 * Ensures that the MDI/MDIX SW state is valid. 762 **/ 763s32 764e1000_validate_mdi_setting(struct e1000_hw *hw) 765{ 766 if (hw->func.validate_mdi_setting != NULL) 767 return hw->func.validate_mdi_setting(hw); 768 else 769 return E1000_SUCCESS; 770} 771 772/** 773 * e1000_mta_set - Sets multicast table bit |
773 * @hw - pointer to the HW structure 774 * @hash_value - Multicast hash value. | 774 * @hw: pointer to the HW structure 775 * @hash_value: Multicast hash value. |
775 * 776 * This sets the bit in the multicast table corresponding to the 777 * hash value. This is a function pointer entry point called by drivers. 778 **/ 779void 780e1000_mta_set(struct e1000_hw *hw, u32 hash_value) 781{ 782 if (hw->func.mta_set != NULL) 783 hw->func.mta_set(hw, hash_value); 784} 785 786/** 787 * e1000_hash_mc_addr - Determines address location in multicast table | 776 * 777 * This sets the bit in the multicast table corresponding to the 778 * hash value. This is a function pointer entry point called by drivers. 779 **/ 780void 781e1000_mta_set(struct e1000_hw *hw, u32 hash_value) 782{ 783 if (hw->func.mta_set != NULL) 784 hw->func.mta_set(hw, hash_value); 785} 786 787/** 788 * e1000_hash_mc_addr - Determines address location in multicast table |
788 * @hw - pointer to the HW structure 789 * @mc_addr - Multicast address to hash. | 789 * @hw: pointer to the HW structure 790 * @mc_addr: Multicast address to hash. |
790 * 791 * This hashes an address to determine its location in the multicast 792 * table. Currently no func pointer exists and all implementations 793 * are handled in the generic version of this function. 794 **/ 795u32 796e1000_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr) 797{ 798 return e1000_hash_mc_addr_generic(hw, mc_addr); 799} 800 801/** 802 * e1000_enable_tx_pkt_filtering - Enable packet filtering on TX | 791 * 792 * This hashes an address to determine its location in the multicast 793 * table. Currently no func pointer exists and all implementations 794 * are handled in the generic version of this function. 795 **/ 796u32 797e1000_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr) 798{ 799 return e1000_hash_mc_addr_generic(hw, mc_addr); 800} 801 802/** 803 * e1000_enable_tx_pkt_filtering - Enable packet filtering on TX |
803 * @hw - pointer to the HW structure | 804 * @hw: pointer to the HW structure |
804 * 805 * Enables packet filtering on transmit packets if manageability is enabled 806 * and host interface is enabled. 807 * Currently no func pointer exists and all implementations are handled in the 808 * generic version of this function. 809 **/ 810boolean_t 811e1000_enable_tx_pkt_filtering(struct e1000_hw *hw) 812{ 813 return e1000_enable_tx_pkt_filtering_generic(hw); 814} 815 816/** 817 * e1000_mng_host_if_write - Writes to the manageability host interface | 805 * 806 * Enables packet filtering on transmit packets if manageability is enabled 807 * and host interface is enabled. 808 * Currently no func pointer exists and all implementations are handled in the 809 * generic version of this function. 810 **/ 811boolean_t 812e1000_enable_tx_pkt_filtering(struct e1000_hw *hw) 813{ 814 return e1000_enable_tx_pkt_filtering_generic(hw); 815} 816 817/** 818 * e1000_mng_host_if_write - Writes to the manageability host interface |
818 * @hw - pointer to the HW structure 819 * @buffer - pointer to the host interface buffer 820 * @length - size of the buffer 821 * @offset - location in the buffer to write to 822 * @sum - sum of the data (not checksum) | 819 * @hw: pointer to the HW structure 820 * @buffer: pointer to the host interface buffer 821 * @length: size of the buffer 822 * @offset: location in the buffer to write to 823 * @sum: sum of the data (not checksum) |
823 * 824 * This function writes the buffer content at the offset given on the host if. 825 * It also does alignment considerations to do the writes in most efficient 826 * way. Also fills up the sum of the buffer in *buffer parameter. 827 **/ 828s32 829e1000_mng_host_if_write(struct e1000_hw * hw, u8 *buffer, u16 length, 830 u16 offset, u8 *sum) 831{ 832 if (hw->func.mng_host_if_write != NULL) 833 return hw->func.mng_host_if_write(hw, buffer, length, offset, 834 sum); 835 else 836 return E1000_NOT_IMPLEMENTED; 837} 838 839/** 840 * e1000_mng_write_cmd_header - Writes manageability command header | 824 * 825 * This function writes the buffer content at the offset given on the host if. 826 * It also does alignment considerations to do the writes in most efficient 827 * way. Also fills up the sum of the buffer in *buffer parameter. 828 **/ 829s32 830e1000_mng_host_if_write(struct e1000_hw * hw, u8 *buffer, u16 length, 831 u16 offset, u8 *sum) 832{ 833 if (hw->func.mng_host_if_write != NULL) 834 return hw->func.mng_host_if_write(hw, buffer, length, offset, 835 sum); 836 else 837 return E1000_NOT_IMPLEMENTED; 838} 839 840/** 841 * e1000_mng_write_cmd_header - Writes manageability command header |
841 * @hw - pointer to the HW structure 842 * @hdr - pointer to the host interface command header | 842 * @hw: pointer to the HW structure 843 * @hdr: pointer to the host interface command header |
843 * 844 * Writes the command header after does the checksum calculation. 845 **/ 846s32 847e1000_mng_write_cmd_header(struct e1000_hw *hw, 848 struct e1000_host_mng_command_header *hdr) 849{ 850 if (hw->func.mng_write_cmd_header != NULL) 851 return hw->func.mng_write_cmd_header(hw, hdr); 852 else 853 return E1000_NOT_IMPLEMENTED; 854} 855 856/** 857 * e1000_mng_enable_host_if - Checks host interface is enabled | 844 * 845 * Writes the command header after does the checksum calculation. 846 **/ 847s32 848e1000_mng_write_cmd_header(struct e1000_hw *hw, 849 struct e1000_host_mng_command_header *hdr) 850{ 851 if (hw->func.mng_write_cmd_header != NULL) 852 return hw->func.mng_write_cmd_header(hw, hdr); 853 else 854 return E1000_NOT_IMPLEMENTED; 855} 856 857/** 858 * e1000_mng_enable_host_if - Checks host interface is enabled |
858 * @hw - pointer to the HW structure | 859 * @hw: pointer to the HW structure |
859 * 860 * Returns E1000_success upon success, else E1000_ERR_HOST_INTERFACE_COMMAND 861 * 862 * This function checks whether the HOST IF is enabled for command operaton 863 * and also checks whether the previous command is completed. It busy waits 864 * in case of previous command is not completed. 865 **/ 866s32 867e1000_mng_enable_host_if(struct e1000_hw * hw) 868{ 869 if (hw->func.mng_enable_host_if != NULL) 870 return hw->func.mng_enable_host_if(hw); 871 else 872 return E1000_NOT_IMPLEMENTED; 873} 874 875/** 876 * e1000_wait_autoneg - Waits for autonegotiation completion | 860 * 861 * Returns E1000_success upon success, else E1000_ERR_HOST_INTERFACE_COMMAND 862 * 863 * This function checks whether the HOST IF is enabled for command operaton 864 * and also checks whether the previous command is completed. It busy waits 865 * in case of previous command is not completed. 866 **/ 867s32 868e1000_mng_enable_host_if(struct e1000_hw * hw) 869{ 870 if (hw->func.mng_enable_host_if != NULL) 871 return hw->func.mng_enable_host_if(hw); 872 else 873 return E1000_NOT_IMPLEMENTED; 874} 875 876/** 877 * e1000_wait_autoneg - Waits for autonegotiation completion |
877 * @hw - pointer to the HW structure | 878 * @hw: pointer to the HW structure |
878 * 879 * Waits for autoneg to complete. Currently no func pointer exists and all 880 * implementations are handled in the generic version of this function. 881 **/ 882s32 883e1000_wait_autoneg(struct e1000_hw *hw) 884{ 885 if (hw->func.wait_autoneg != NULL) 886 return hw->func.wait_autoneg(hw); 887 else 888 return E1000_SUCCESS; 889} 890 891/** 892 * e1000_check_reset_block - Verifies PHY can be reset | 879 * 880 * Waits for autoneg to complete. Currently no func pointer exists and all 881 * implementations are handled in the generic version of this function. 882 **/ 883s32 884e1000_wait_autoneg(struct e1000_hw *hw) 885{ 886 if (hw->func.wait_autoneg != NULL) 887 return hw->func.wait_autoneg(hw); 888 else 889 return E1000_SUCCESS; 890} 891 892/** 893 * e1000_check_reset_block - Verifies PHY can be reset |
893 * @hw - pointer to the HW structure | 894 * @hw: pointer to the HW structure |
894 * 895 * Checks if the PHY is in a state that can be reset or if manageability 896 * has it tied up. This is a function pointer entry point called by drivers. 897 **/ 898s32 899e1000_check_reset_block(struct e1000_hw *hw) 900{ 901 if (hw->func.check_reset_block != NULL) 902 return hw->func.check_reset_block(hw); 903 else 904 return E1000_SUCCESS; 905} 906 907/** 908 * e1000_read_phy_reg - Reads PHY register | 895 * 896 * Checks if the PHY is in a state that can be reset or if manageability 897 * has it tied up. This is a function pointer entry point called by drivers. 898 **/ 899s32 900e1000_check_reset_block(struct e1000_hw *hw) 901{ 902 if (hw->func.check_reset_block != NULL) 903 return hw->func.check_reset_block(hw); 904 else 905 return E1000_SUCCESS; 906} 907 908/** 909 * e1000_read_phy_reg - Reads PHY register |
909 * @hw - pointer to the HW structure 910 * @offset - the register to read 911 * @data - the buffer to store the 16-bit read. | 910 * @hw: pointer to the HW structure 911 * @offset: the register to read 912 * @data: the buffer to store the 16-bit read. |
912 * 913 * Reads the PHY register and returns the value in data. 914 * This is a function pointer entry point called by drivers. 915 **/ 916s32 917e1000_read_phy_reg(struct e1000_hw *hw, u32 offset, u16 *data) 918{ 919 if (hw->func.read_phy_reg != NULL) 920 return hw->func.read_phy_reg(hw, offset, data); 921 else 922 return E1000_SUCCESS; 923} 924 925/** 926 * e1000_write_phy_reg - Writes PHY register | 913 * 914 * Reads the PHY register and returns the value in data. 915 * This is a function pointer entry point called by drivers. 916 **/ 917s32 918e1000_read_phy_reg(struct e1000_hw *hw, u32 offset, u16 *data) 919{ 920 if (hw->func.read_phy_reg != NULL) 921 return hw->func.read_phy_reg(hw, offset, data); 922 else 923 return E1000_SUCCESS; 924} 925 926/** 927 * e1000_write_phy_reg - Writes PHY register |
927 * @hw - pointer to the HW structure 928 * @offset - the register to write 929 * @data - the value to write. | 928 * @hw: pointer to the HW structure 929 * @offset: the register to write 930 * @data: the value to write. |
930 * 931 * Writes the PHY register at offset with the value in data. 932 * This is a function pointer entry point called by drivers. 933 **/ 934s32 935e1000_write_phy_reg(struct e1000_hw *hw, u32 offset, u16 data) 936{ 937 if (hw->func.write_phy_reg != NULL) 938 return hw->func.write_phy_reg(hw, offset, data); 939 else 940 return E1000_SUCCESS; 941} 942 943/** 944 * e1000_read_kmrn_reg - Reads register using Kumeran interface | 931 * 932 * Writes the PHY register at offset with the value in data. 933 * This is a function pointer entry point called by drivers. 934 **/ 935s32 936e1000_write_phy_reg(struct e1000_hw *hw, u32 offset, u16 data) 937{ 938 if (hw->func.write_phy_reg != NULL) 939 return hw->func.write_phy_reg(hw, offset, data); 940 else 941 return E1000_SUCCESS; 942} 943 944/** 945 * e1000_read_kmrn_reg - Reads register using Kumeran interface |
945 * @hw - pointer to the HW structure 946 * @offset - the register to read 947 * @data - the location to store the 16-bit value read. | 946 * @hw: pointer to the HW structure 947 * @offset: the register to read 948 * @data: the location to store the 16-bit value read. |
948 * 949 * Reads a register out of the Kumeran interface. Currently no func pointer 950 * exists and all implementations are handled in the generic version of 951 * this function. 952 **/ 953s32 954e1000_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data) 955{ 956 return e1000_read_kmrn_reg_generic(hw, offset, data); 957} 958 959/** 960 * e1000_write_kmrn_reg - Writes register using Kumeran interface | 949 * 950 * Reads a register out of the Kumeran interface. Currently no func pointer 951 * exists and all implementations are handled in the generic version of 952 * this function. 953 **/ 954s32 955e1000_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data) 956{ 957 return e1000_read_kmrn_reg_generic(hw, offset, data); 958} 959 960/** 961 * e1000_write_kmrn_reg - Writes register using Kumeran interface |
961 * @hw - pointer to the HW structure 962 * @offset - the register to write 963 * @data - the value to write. | 962 * @hw: pointer to the HW structure 963 * @offset: the register to write 964 * @data: the value to write. |
964 * 965 * Writes a register to the Kumeran interface. Currently no func pointer 966 * exists and all implementations are handled in the generic version of 967 * this function. 968 **/ 969s32 970e1000_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data) 971{ 972 return e1000_write_kmrn_reg_generic(hw, offset, data); 973} 974 975/** 976 * e1000_get_cable_length - Retrieves cable length estimation | 965 * 966 * Writes a register to the Kumeran interface. Currently no func pointer 967 * exists and all implementations are handled in the generic version of 968 * this function. 969 **/ 970s32 971e1000_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data) 972{ 973 return e1000_write_kmrn_reg_generic(hw, offset, data); 974} 975 976/** 977 * e1000_get_cable_length - Retrieves cable length estimation |
977 * @hw - pointer to the HW structure | 978 * @hw: pointer to the HW structure |
978 * 979 * This function estimates the cable length and stores them in 980 * hw->phy.min_length and hw->phy.max_length. This is a function pointer 981 * entry point called by drivers. 982 **/ 983s32 984e1000_get_cable_length(struct e1000_hw *hw) 985{ 986 if (hw->func.get_cable_length != NULL) 987 return hw->func.get_cable_length(hw); 988 else 989 return E1000_SUCCESS; 990} 991 992/** 993 * e1000_get_phy_info - Retrieves PHY information from registers | 979 * 980 * This function estimates the cable length and stores them in 981 * hw->phy.min_length and hw->phy.max_length. This is a function pointer 982 * entry point called by drivers. 983 **/ 984s32 985e1000_get_cable_length(struct e1000_hw *hw) 986{ 987 if (hw->func.get_cable_length != NULL) 988 return hw->func.get_cable_length(hw); 989 else 990 return E1000_SUCCESS; 991} 992 993/** 994 * e1000_get_phy_info - Retrieves PHY information from registers |
994 * @hw - pointer to the HW structure | 995 * @hw: pointer to the HW structure |
995 * 996 * This function gets some information from various PHY registers and 997 * populates hw->phy values with it. This is a function pointer entry 998 * point called by drivers. 999 **/ 1000s32 1001e1000_get_phy_info(struct e1000_hw *hw) 1002{ 1003 if (hw->func.get_phy_info != NULL) 1004 return hw->func.get_phy_info(hw); 1005 else 1006 return E1000_SUCCESS; 1007} 1008 1009/** 1010 * e1000_phy_hw_reset - Hard PHY reset | 996 * 997 * This function gets some information from various PHY registers and 998 * populates hw->phy values with it. This is a function pointer entry 999 * point called by drivers. 1000 **/ 1001s32 1002e1000_get_phy_info(struct e1000_hw *hw) 1003{ 1004 if (hw->func.get_phy_info != NULL) 1005 return hw->func.get_phy_info(hw); 1006 else 1007 return E1000_SUCCESS; 1008} 1009 1010/** 1011 * e1000_phy_hw_reset - Hard PHY reset |
1011 * @hw - pointer to the HW structure | 1012 * @hw: pointer to the HW structure |
1012 * 1013 * Performs a hard PHY reset. This is a function pointer entry point called 1014 * by drivers. 1015 **/ 1016s32 1017e1000_phy_hw_reset(struct e1000_hw *hw) 1018{ 1019 if (hw->func.reset_phy != NULL) 1020 return hw->func.reset_phy(hw); 1021 else 1022 return E1000_SUCCESS; 1023} 1024 1025/** 1026 * e1000_phy_commit - Soft PHY reset | 1013 * 1014 * Performs a hard PHY reset. This is a function pointer entry point called 1015 * by drivers. 1016 **/ 1017s32 1018e1000_phy_hw_reset(struct e1000_hw *hw) 1019{ 1020 if (hw->func.reset_phy != NULL) 1021 return hw->func.reset_phy(hw); 1022 else 1023 return E1000_SUCCESS; 1024} 1025 1026/** 1027 * e1000_phy_commit - Soft PHY reset |
1027 * @hw - pointer to the HW structure | 1028 * @hw: pointer to the HW structure |
1028 * 1029 * Performs a soft PHY reset on those that apply. This is a function pointer 1030 * entry point called by drivers. 1031 **/ 1032s32 1033e1000_phy_commit(struct e1000_hw *hw) 1034{ 1035 if (hw->func.commit_phy != NULL) 1036 return hw->func.commit_phy(hw); 1037 else 1038 return E1000_SUCCESS; 1039} 1040 1041/** 1042 * e1000_set_d3_lplu_state - Sets low power link up state for D0 | 1029 * 1030 * Performs a soft PHY reset on those that apply. This is a function pointer 1031 * entry point called by drivers. 1032 **/ 1033s32 1034e1000_phy_commit(struct e1000_hw *hw) 1035{ 1036 if (hw->func.commit_phy != NULL) 1037 return hw->func.commit_phy(hw); 1038 else 1039 return E1000_SUCCESS; 1040} 1041 1042/** 1043 * e1000_set_d3_lplu_state - Sets low power link up state for D0 |
1043 * @hw - pointer to the HW structure 1044 * @active boolean used to enable/disable lplu | 1044 * @hw: pointer to the HW structure 1045 * @active: boolean used to enable/disable lplu |
1045 * 1046 * Success returns 0, Failure returns 1 1047 * 1048 * The low power link up (lplu) state is set to the power management level D0 1049 * and SmartSpeed is disabled when active is true, else clear lplu for D0 1050 * and enable Smartspeed. LPLU and Smartspeed are mutually exclusive. LPLU 1051 * is used during Dx states where the power conservation is most important. 1052 * During driver activity, SmartSpeed should be enabled so performance is --- 5 unchanged lines hidden (view full) --- 1058 if (hw->func.set_d0_lplu_state != NULL) 1059 return hw->func.set_d0_lplu_state(hw, active); 1060 else 1061 return E1000_SUCCESS; 1062} 1063 1064/** 1065 * e1000_set_d3_lplu_state - Sets low power link up state for D3 | 1046 * 1047 * Success returns 0, Failure returns 1 1048 * 1049 * The low power link up (lplu) state is set to the power management level D0 1050 * and SmartSpeed is disabled when active is true, else clear lplu for D0 1051 * and enable Smartspeed. LPLU and Smartspeed are mutually exclusive. LPLU 1052 * is used during Dx states where the power conservation is most important. 1053 * During driver activity, SmartSpeed should be enabled so performance is --- 5 unchanged lines hidden (view full) --- 1059 if (hw->func.set_d0_lplu_state != NULL) 1060 return hw->func.set_d0_lplu_state(hw, active); 1061 else 1062 return E1000_SUCCESS; 1063} 1064 1065/** 1066 * e1000_set_d3_lplu_state - Sets low power link up state for D3 |
1066 * @hw - pointer to the HW structure 1067 * @active boolean used to enable/disable lplu | 1067 * @hw: pointer to the HW structure 1068 * @active: boolean used to enable/disable lplu |
1068 * 1069 * Success returns 0, Failure returns 1 1070 * 1071 * The low power link up (lplu) state is set to the power management level D3 1072 * and SmartSpeed is disabled when active is true, else clear lplu for D3 1073 * and enable Smartspeed. LPLU and Smartspeed are mutually exclusive. LPLU 1074 * is used during Dx states where the power conservation is most important. 1075 * During driver activity, SmartSpeed should be enabled so performance is --- 5 unchanged lines hidden (view full) --- 1081 if (hw->func.set_d3_lplu_state != NULL) 1082 return hw->func.set_d3_lplu_state(hw, active); 1083 else 1084 return E1000_SUCCESS; 1085} 1086 1087/** 1088 * e1000_read_mac_addr - Reads MAC address | 1069 * 1070 * Success returns 0, Failure returns 1 1071 * 1072 * The low power link up (lplu) state is set to the power management level D3 1073 * and SmartSpeed is disabled when active is true, else clear lplu for D3 1074 * and enable Smartspeed. LPLU and Smartspeed are mutually exclusive. LPLU 1075 * is used during Dx states where the power conservation is most important. 1076 * During driver activity, SmartSpeed should be enabled so performance is --- 5 unchanged lines hidden (view full) --- 1082 if (hw->func.set_d3_lplu_state != NULL) 1083 return hw->func.set_d3_lplu_state(hw, active); 1084 else 1085 return E1000_SUCCESS; 1086} 1087 1088/** 1089 * e1000_read_mac_addr - Reads MAC address |
1089 * @hw - pointer to the HW structure | 1090 * @hw: pointer to the HW structure |
1090 * 1091 * Reads the MAC address out of the adapter and stores it in the HW structure. 1092 * Currently no func pointer exists and all implementations are handled in the 1093 * generic version of this function. 1094 **/ 1095s32 1096e1000_read_mac_addr(struct e1000_hw *hw) 1097{ 1098 return e1000_read_mac_addr_generic(hw); 1099} 1100 1101/** 1102 * e1000_read_part_num - Read device part number | 1091 * 1092 * Reads the MAC address out of the adapter and stores it in the HW structure. 1093 * Currently no func pointer exists and all implementations are handled in the 1094 * generic version of this function. 1095 **/ 1096s32 1097e1000_read_mac_addr(struct e1000_hw *hw) 1098{ 1099 return e1000_read_mac_addr_generic(hw); 1100} 1101 1102/** 1103 * e1000_read_part_num - Read device part number |
1103 * @hw - pointer to the HW structure 1104 * @part_num - pointer to device part number | 1104 * @hw: pointer to the HW structure 1105 * @part_num: pointer to device part number |
1105 * 1106 * Reads the product board assembly (PBA) number from the EEPROM and stores 1107 * the value in part_num. 1108 * Currently no func pointer exists and all implementations are handled in the 1109 * generic version of this function. 1110 **/ 1111s32 1112e1000_read_part_num(struct e1000_hw *hw, u32 *part_num) 1113{ 1114 return e1000_read_part_num_generic(hw, part_num); 1115} 1116 1117/** 1118 * e1000_validate_nvm_checksum - Verifies NVM (EEPROM) checksum | 1106 * 1107 * Reads the product board assembly (PBA) number from the EEPROM and stores 1108 * the value in part_num. 1109 * Currently no func pointer exists and all implementations are handled in the 1110 * generic version of this function. 1111 **/ 1112s32 1113e1000_read_part_num(struct e1000_hw *hw, u32 *part_num) 1114{ 1115 return e1000_read_part_num_generic(hw, part_num); 1116} 1117 1118/** 1119 * e1000_validate_nvm_checksum - Verifies NVM (EEPROM) checksum |
1119 * @hw - pointer to the HW structure | 1120 * @hw: pointer to the HW structure |
1120 * 1121 * Validates the NVM checksum is correct. This is a function pointer entry 1122 * point called by drivers. 1123 **/ 1124s32 1125e1000_validate_nvm_checksum(struct e1000_hw *hw) 1126{ 1127 if (hw->func.validate_nvm != NULL) 1128 return hw->func.validate_nvm(hw); 1129 else 1130 return -E1000_ERR_CONFIG; 1131} 1132 1133/** 1134 * e1000_update_nvm_checksum - Updates NVM (EEPROM) checksum | 1121 * 1122 * Validates the NVM checksum is correct. This is a function pointer entry 1123 * point called by drivers. 1124 **/ 1125s32 1126e1000_validate_nvm_checksum(struct e1000_hw *hw) 1127{ 1128 if (hw->func.validate_nvm != NULL) 1129 return hw->func.validate_nvm(hw); 1130 else 1131 return -E1000_ERR_CONFIG; 1132} 1133 1134/** 1135 * e1000_update_nvm_checksum - Updates NVM (EEPROM) checksum |
1135 * @hw - pointer to the HW structure | 1136 * @hw: pointer to the HW structure |
1136 * 1137 * Updates the NVM checksum. Currently no func pointer exists and all 1138 * implementations are handled in the generic version of this function. 1139 **/ 1140s32 1141e1000_update_nvm_checksum(struct e1000_hw *hw) 1142{ 1143 if (hw->func.update_nvm != NULL) 1144 return hw->func.update_nvm(hw); 1145 else 1146 return -E1000_ERR_CONFIG; 1147} 1148 1149/** 1150 * e1000_reload_nvm - Reloads EEPROM | 1137 * 1138 * Updates the NVM checksum. Currently no func pointer exists and all 1139 * implementations are handled in the generic version of this function. 1140 **/ 1141s32 1142e1000_update_nvm_checksum(struct e1000_hw *hw) 1143{ 1144 if (hw->func.update_nvm != NULL) 1145 return hw->func.update_nvm(hw); 1146 else 1147 return -E1000_ERR_CONFIG; 1148} 1149 1150/** 1151 * e1000_reload_nvm - Reloads EEPROM |
1151 * @hw - pointer to the HW structure | 1152 * @hw: pointer to the HW structure |
1152 * 1153 * Reloads the EEPROM by setting the "Reinitialize from EEPROM" bit in the 1154 * extended control register. 1155 **/ 1156void 1157e1000_reload_nvm(struct e1000_hw *hw) 1158{ 1159 if (hw->func.reload_nvm != NULL) 1160 hw->func.reload_nvm(hw); 1161} 1162 1163/** 1164 * e1000_read_nvm - Reads NVM (EEPROM) | 1153 * 1154 * Reloads the EEPROM by setting the "Reinitialize from EEPROM" bit in the 1155 * extended control register. 1156 **/ 1157void 1158e1000_reload_nvm(struct e1000_hw *hw) 1159{ 1160 if (hw->func.reload_nvm != NULL) 1161 hw->func.reload_nvm(hw); 1162} 1163 1164/** 1165 * e1000_read_nvm - Reads NVM (EEPROM) |
1165 * @hw - pointer to the HW structure 1166 * @offset - the word offset to read 1167 * @words - number of 16-bit words to read 1168 * @data - pointer to the properly sized buffer for the data. | 1166 * @hw: pointer to the HW structure 1167 * @offset: the word offset to read 1168 * @words: number of 16-bit words to read 1169 * @data: pointer to the properly sized buffer for the data. |
1169 * 1170 * Reads 16-bit chunks of data from the NVM (EEPROM). This is a function 1171 * pointer entry point called by drivers. 1172 **/ 1173s32 1174e1000_read_nvm(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) 1175{ 1176 if (hw->func.read_nvm != NULL) 1177 return hw->func.read_nvm(hw, offset, words, data); 1178 else 1179 return -E1000_ERR_CONFIG; 1180} 1181 1182/** 1183 * e1000_write_nvm - Writes to NVM (EEPROM) | 1170 * 1171 * Reads 16-bit chunks of data from the NVM (EEPROM). This is a function 1172 * pointer entry point called by drivers. 1173 **/ 1174s32 1175e1000_read_nvm(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) 1176{ 1177 if (hw->func.read_nvm != NULL) 1178 return hw->func.read_nvm(hw, offset, words, data); 1179 else 1180 return -E1000_ERR_CONFIG; 1181} 1182 1183/** 1184 * e1000_write_nvm - Writes to NVM (EEPROM) |
1184 * @hw - pointer to the HW structure 1185 * @offset - the word offset to read 1186 * @words - number of 16-bit words to write 1187 * @data - pointer to the properly sized buffer for the data. | 1185 * @hw: pointer to the HW structure 1186 * @offset: the word offset to read 1187 * @words: number of 16-bit words to write 1188 * @data: pointer to the properly sized buffer for the data. |
1188 * 1189 * Writes 16-bit chunks of data to the NVM (EEPROM). This is a function 1190 * pointer entry point called by drivers. 1191 **/ 1192s32 1193e1000_write_nvm(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) 1194{ 1195 if (hw->func.write_nvm != NULL) 1196 return hw->func.write_nvm(hw, offset, words, data); 1197 else 1198 return E1000_SUCCESS; 1199} 1200 1201/** 1202 * e1000_write_8bit_ctrl_reg - Writes 8bit Control register | 1189 * 1190 * Writes 16-bit chunks of data to the NVM (EEPROM). This is a function 1191 * pointer entry point called by drivers. 1192 **/ 1193s32 1194e1000_write_nvm(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) 1195{ 1196 if (hw->func.write_nvm != NULL) 1197 return hw->func.write_nvm(hw, offset, words, data); 1198 else 1199 return E1000_SUCCESS; 1200} 1201 1202/** 1203 * e1000_write_8bit_ctrl_reg - Writes 8bit Control register |
1203 * @hw - pointer to the HW structure 1204 * @reg - 32bit register offset 1205 * @offset - the register to write 1206 * @data - the value to write. | 1204 * @hw: pointer to the HW structure 1205 * @reg: 32bit register offset 1206 * @offset: the register to write 1207 * @data: the value to write. |
1207 * 1208 * Writes the PHY register at offset with the value in data. 1209 * This is a function pointer entry point called by drivers. 1210 **/ 1211s32 1212e1000_write_8bit_ctrl_reg(struct e1000_hw *hw, u32 reg, u32 offset, u8 data) 1213{ 1214 return e1000_write_8bit_ctrl_reg_generic(hw, reg, offset, data); 1215} | 1208 * 1209 * Writes the PHY register at offset with the value in data. 1210 * This is a function pointer entry point called by drivers. 1211 **/ 1212s32 1213e1000_write_8bit_ctrl_reg(struct e1000_hw *hw, u32 reg, u32 offset, u8 data) 1214{ 1215 return e1000_write_8bit_ctrl_reg_generic(hw, reg, offset, data); 1216} |