19
20##############################################################
21### Important initial Boot-time options ####################
22##############################################################
23
24rc_debug="NO" # Set to YES to enable debugging output from rc.d
25rc_info="NO" # Enables display of informational messages at boot.
26rcshutdown_timeout="30" # Seconds to wait before terminating rc.shutdown
27early_late_divider="mountcritlocal" # Script that separates early/late
28 # stages of the boot process. Make sure you know
29 # the ramifications if you change this.
30 # See rc.conf(5) for more details.
31
32swapfile="NO" # Set to name of swapfile if aux swapfile desired.
33apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO).
34apmd_enable="NO" # Run apmd to handle APM event from userland.
35apmd_flags="" # Flags to apmd (if enabled).
36devd_enable="YES" # Run devd, to trigger programs on device tree changes.
37devd_flags="" # Additional flags for devd(8).
38kldxref_enable="NO" # Build linker.hints files with kldxref(8).
39kldxref_clobber="NO" # Overwrite old linker.hints at boot.
40kldxref_module_path="" # Override kern.module_path. A ';'-delimited list.
41powerd_enable="NO" # Run powerd to lower our power usage.
42powerd_flags="" # Flags to powerd (if enabled).
43tmpmfs="AUTO" # Set to YES to always create an mfs /tmp, NO to never
44tmpsize="20m" # Size of mfs /tmp if created
45tmpmfs_flags="-S -M" # Extra mdmfs options for the mfs /tmp
46varmfs="AUTO" # Set to YES to always create an mfs /var, NO to never
47varsize="32m" # Size of mfs /var if created
48varmfs_flags="-S -M" # Extra mount options for the mfs /var
49populate_var="AUTO" # Set to YES to always (re)populate /var, NO to never
50cleanvar_enable="YES" # Clean the /var directory
51local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d" # startup script dirs.
52script_name_sep=" " # Change if your startup scripts' names contain spaces
53rc_conf_files="/etc/rc.conf /etc/rc.conf.local"
54
55# Experimental - test before enabling
56gbde_autoattach_all="NO" # YES automatically mounts gbde devices from fstab
57gbde_devices="NO" # Devices to automatically attach (list, or AUTO)
58gbde_attach_attempts="3" # Number of times to attempt attaching gbde devices
59gbde_lockdir="/etc" # Where to look for gbde lockfiles
60
61# GELI disk encryption configuration.
62geli_devices="" # List of devices to automatically attach in addition to
63 # GELI devices listed in /etc/fstab.
64geli_tries="" # Number of times to attempt attaching geli device.
65 # If empty, kern.geom.eli.tries will be used.
66geli_default_flags="" # Default flags for geli(8).
67geli_autodetach="YES" # Automatically detach on last close.
68 # Providers are marked as such when all file systems are
69 # mounted.
70# Example use.
71#geli_devices="da1 mirror/home"
72#geli_da1_flags="-p -k /etc/geli/da1.keys"
73#geli_da1_autodetach="NO"
74#geli_mirror_home_flags="-k /etc/geli/home.keys"
75
76geli_swap_flags="-e aes -l 256 -s 4096 -d" # Options for GELI-encrypted
77 # swap partitions.
78
79root_rw_mount="YES" # Set to NO to inhibit remounting root read-write.
80fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails.
81background_fsck="YES" # Attempt to run fsck in the background where possible.
82background_fsck_delay="60" # Time to wait (seconds) before starting the fsck.
83netfs_types="nfs:NFS nfs4:NFS4 smbfs:SMB portalfs:PORTAL nwfs:NWFS" # Net filesystems.
84extra_netfs_types="NO" # List of network extra filesystem types for delayed
85 # mount at startup (or NO).
86
87##############################################################
88### Network configuration sub-section ######################
89##############################################################
90
91### Basic network and firewall/security options: ###
92hostname="" # Set this!
93nisdomainname="NO" # Set to NIS domain if using NIS (or NO).
94dhclient_program="/sbin/dhclient" # Path to dhcp client program.
95dhclient_flags="" # Extra flags to pass to dhcp client.
96dhclient_flags_fxp0="" # Extra dhclient flags for fxp0 only
97background_dhclient="NO" # Start dhcp client in the background.
98background_dhclient_fxp0="" # Start dhcp client on fxp0 in the background.
99synchronous_dhclient="YES" # Start dhclient directly on configured
100 # interfaces during startup.
101firewall_enable="NO" # Set to YES to enable firewall functionality
102firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall
103firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall)
104firewall_quiet="NO" # Set to YES to suppress rule display
105firewall_logging="NO" # Set to YES to enable events logging
106firewall_flags="" # Flags passed to ipfw when type is a file
107ip_portrange_first="NO" # Set first dynamically allocated port
108ip_portrange_last="NO" # Set last dynamically allocated port
109ike_enable="NO" # Enable IKE daemon (usually racoon or isakmpd)
110ike_program="/usr/local/sbin/isakmpd" # Path to IKE daemon
111ike_flags="" # Additional flags for IKE daemon
112ipsec_enable="NO" # Set to YES to run setkey on ipsec_file
113ipsec_file="/etc/ipsec.conf" # Name of config file for setkey
114natd_program="/sbin/natd" # path to natd, if you want a different one.
115natd_enable="NO" # Enable natd (if firewall_enable == YES).
116natd_interface="" # Public interface or IPaddress to use.
117natd_flags="" # Additional flags for natd.
118ipfilter_enable="NO" # Set to YES to enable ipfilter functionality
119ipfilter_program="/sbin/ipf" # where the ipfilter program lives
120ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see
121 # /usr/src/contrib/ipfilter/rules for examples
122ipfilter_flags="" # additional flags for ipfilter
123ipnat_enable="NO" # Set to YES to enable ipnat functionality
124ipnat_program="/sbin/ipnat" # where the ipnat program lives
125ipnat_rules="/etc/ipnat.rules" # rules definition file for ipnat
126ipnat_flags="" # additional flags for ipnat
127ipmon_enable="NO" # Set to YES for ipmon; needs ipfilter or ipnat
128ipmon_program="/sbin/ipmon" # where the ipfilter monitor program lives
129ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/ipflog"
130ipfs_enable="NO" # Set to YES to enable saving and restoring
131 # of state tables at shutdown and boot
132ipfs_program="/sbin/ipfs" # where the ipfs program lives
133ipfs_flags="" # additional flags for ipfs
134pf_enable="NO" # Set to YES to enable packet filter (pf)
135pf_rules="/etc/pf.conf" # rules definition file for pf
136pf_program="/sbin/pfctl" # where the pfctl program lives
137pf_flags="" # additional flags for pfctl
138pflog_enable="NO" # Set to YES to enable packet filter logging
139pflog_logfile="/var/log/pflog" # where pflogd should store the logfile
140pflog_program="/sbin/pflogd" # where the pflogd program lives
141pflog_flags="" # additional flags for pflogd
142pfsync_enable="NO" # Expose pf state to other hosts for syncing
143pfsync_syncdev="" # Interface for pfsync to work through
144pfsync_ifconfig="" # Additional options to ifconfig(8) for pfsync
145tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions.
146log_in_vain="0" # >=1 to log connects to ports w/o listeners.
147tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO).
148# For the following option you need to have TCP_DROP_SYNFIN set in your
149# kernel. Please refer to LINT and NOTES for details.
150tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN
151 # NOTE: this violates the TCP specification
152icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets
153icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets
154network_interfaces="auto" # List of network interfaces (or "auto").
155cloned_interfaces="" # List of cloned network interfaces to create.
156#cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config.
157ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration.
158#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry.
159#ifconfig_ed0_ipx="ipx 0x00010010" # Sample IPX address family entry.
160#ifconfig_fxp0_name="net0" # Change interface name from fxp0 to net0.
161#ipv4_addrs_fxp0="192.168.0.1/24 192.168.1.1-5/28" # example IPv4 address entry.
162#
163#autobridge_interfaces="bridge0" # List of bridges to check
164#autobridge_bridge0="tap* vlan0" # Interface glob to automatically add to the bridge
165#
166# If you have any sppp(4) interfaces above, you might also want to set
167# the following parameters. Refer to spppcontrol(8) for their meaning.
168sppp_interfaces="" # List of sppp interfaces.
169#sppp_interfaces="isp0" # example: sppp over ISDN
170#spppconfig_isp0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'"
171gif_interfaces="NO" # List of GIF tunnels (or "NO").
172#gif_interfaces="gif0 gif1" # Examples typically for a router.
173 # Choose correct tunnel addrs.
174#gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router.
175#gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router.
176
177# User ppp configuration.
178ppp_enable="NO" # Start user-ppp (or NO).
179ppp_program="/usr/sbin/ppp" # Path to user-ppp program.
180ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated".
181 # For details see man page for ppp(8). Default is auto.
182ppp_nat="YES" # Use PPP's internal network address translation or NO.
183ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf.
184ppp_user="root" # Which user to run ppp as
185
186### Network daemon (miscellaneous) ###
187hostapd_enable="NO" # Run hostap daemon.
188syslogd_enable="YES" # Run syslog daemon (or NO).
189syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one.
190syslogd_flags="-s" # Flags to syslogd (if enabled).
191inetd_enable="NO" # Run the network daemon dispatcher (YES/NO).
192inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one.
193inetd_flags="-wW -C 60" # Optional flags to inetd
194#
195# named. It may be possible to run named in a sandbox, man security for
196# details.
197#
198named_enable="NO" # Run named, the DNS server (or NO).
199named_program="/usr/sbin/named" # path to named, if you want a different one.
200#named_flags="" # Flags for named
201named_pidfile="/var/run/named/pid" # Must set this in named.conf as well
202named_uid="bind" # User to run named as
203named_chrootdir="/var/named" # Chroot directory (or "" not to auto-chroot it)
204named_chroot_autoupdate="YES" # Automatically install/update chrooted
205 # components of named. See /etc/rc.d/named.
206named_symlink_enable="YES" # Symlink the chrooted pid file
207
208#
209# kerberos. Do not run the admin daemons on slave servers
210#
211kerberos5_server_enable="NO" # Run a kerberos 5 master server (or NO).
212kerberos5_server="/usr/libexec/kdc" # path to kerberos 5 KDC
213kerberos5_server_flags="" # Additional flags to the kerberos 5 server
214kadmind5_server_enable="NO" # Run kadmind (or NO)
215kadmind5_server="/usr/libexec/kadmind" # path to kerberos 5 admin daemon
216kpasswdd_server_enable="NO" # Run kpasswdd (or NO)
217kpasswdd_server="/usr/libexec/kpasswdd" # path to kerberos 5 passwd daemon
218
219rwhod_enable="NO" # Run the rwho daemon (or NO).
220rwhod_flags="" # Flags for rwhod
221rarpd_enable="NO" # Run rarpd (or NO).
222rarpd_flags="" # Flags to rarpd.
223bootparamd_enable="NO" # Run bootparamd (or NO).
224bootparamd_flags="" # Flags to bootparamd
225pppoed_enable="NO" # Run the PPP over Ethernet daemon.
226pppoed_provider="*" # Provider and ppp(8) config file entry.
227pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled).
228pppoed_interface="fxp0" # The interface that pppoed runs on.
229sshd_enable="NO" # Enable sshd
230sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one.
231sshd_flags="" # Additional flags for sshd.
232ftpd_enable="NO" # Enable stand-alone ftpd.
233ftpd_program="/usr/libexec/ftpd" # Path to ftpd, if you want a different one.
234ftpd_flags="" # Additional flags to stand-alone ftpd.
235
236### Network daemon (NFS): All need rpcbind_enable="YES" ###
237amd_enable="NO" # Run amd service with $amd_flags (or NO).
238amd_program="/usr/sbin/amd" # path to amd, if you want a different one.
239amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map"
240amd_map_program="NO" # Can be set to "ypcat -k amd.master"
241nfs_client_enable="NO" # This host is an NFS client (or NO).
242nfs_access_cache="60" # Client cache timeout in seconds
243nfs_server_enable="NO" # This host is an NFS server (or NO).
244nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled).
245mountd_enable="NO" # Run mountd (or NO).
246mountd_flags="-r" # Flags to mountd (if NFS server enabled).
247weak_mountd_authentication="NO" # Allow non-root mount requests to be served.
248nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO).
249nfs_bufpackets="" # bufspace (in packets) for client
250rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server.
251rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server.
252rpcbind_enable="NO" # Run the portmapper service (YES/NO).
253rpcbind_program="/usr/sbin/rpcbind" # path to rpcbind, if you want a different one.
254rpcbind_flags="" # Flags to rpcbind (if enabled).
255rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO).
256keyserv_enable="NO" # Run the SecureRPC keyserver (or NO).
257keyserv_flags="" # Flags to keyserv (if enabled).
258
259### Network Time Services options: ###
260timed_enable="NO" # Run the time daemon (or NO).
261timed_flags="" # Flags to timed (if enabled).
262ntpdate_enable="NO" # Run ntpdate to sync time on boot (or NO).
263ntpdate_program="/usr/sbin/ntpdate" # path to ntpdate, if you want a different one.
264ntpdate_flags="-b" # Flags to ntpdate (if enabled).
265ntpdate_config="/etc/ntp.conf" # ntpdate(8) configuration file
266ntpdate_hosts="" # Whitespace-separated list of ntpdate(8) servers.
267ntpd_enable="NO" # Run ntpd Network Time Protocol (or NO).
268ntpd_program="/usr/sbin/ntpd" # path to ntpd, if you want a different one.
269ntpd_config="/etc/ntp.conf" # ntpd(8) configuration file
270ntpd_sync_on_start="NO" # Sync time on ntpd startup, even if offset is high
271ntpd_flags="-p /var/run/ntpd.pid -f /var/db/ntpd.drift"
272 # Flags to ntpd (if enabled).
273
274# Network Information Services (NIS) options: All need rpcbind_enable="YES" ###
275nis_client_enable="NO" # We're an NIS client (or NO).
276nis_client_flags="" # Flags to ypbind (if enabled).
277nis_ypset_enable="NO" # Run ypset at boot time (or NO).
278nis_ypset_flags="" # Flags to ypset (if enabled).
279nis_server_enable="NO" # We're an NIS server (or NO).
280nis_server_flags="" # Flags to ypserv (if enabled).
281nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO).
282nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled).
283nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO).
284nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled).
285
286### SNMP daemon ###
287# Be sure to understand the security implications of running SNMP v1/v2
288# in your network.
289bsnmpd_enable="NO" # Run the SNMP daemon (or NO).
290bsnmpd_flags="" # Flags for bsnmpd.
291
292### Network routing options: ###
293defaultrouter="NO" # Set to default gateway (or NO).
294static_routes="" # Set to static route list (or leave empty).
295natm_static_routes="" # Set to static route list for NATM (or leave empty).
296gateway_enable="NO" # Set to YES if this host will be a gateway.
297router_enable="NO" # Set to YES to enable a routing daemon.
298router="/sbin/routed" # Name of routing daemon to use if enabled.
299router_flags="-q" # Flags for routing daemon.
300mrouted_enable="NO" # Do IPv4 multicast routing.
301mrouted_program="/usr/local/sbin/mrouted" # Name of IPv4 multicast
302 # routing daemon. You need to
303 # install it from package or
304 # port.
305mrouted_flags="" # Flags for multicast routing daemon.
306ipxgateway_enable="NO" # Set to YES to enable IPX routing.
307ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon.
308ipxrouted_flags="" # Flags for IPX routing daemon.
309arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL.
310forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES")
311accept_sourceroute="NO" # accept source routed packets to us
312
313### ATM interface options: ###
314atm_enable="NO" # Configure ATM interfaces (or NO).
315#atm_netif_hea0="atm 1" # Network interfaces for physical interface.
316#atm_sigmgr_hea0="uni31" # Signalling manager for physical interface.
317#atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI).
318#atm_macaddr_hea0="NO" # Override physical MAC address (or NO).
319#atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local).
320#atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO).
321atm_pvcs="" # Set to PVC list (or leave empty).
322atm_arps="" # Set to permanent ARP list (or leave empty).
323
324### ISDN interface options: (see also: /usr/share/examples/isdn) ###
325isdn_enable="NO" # Enable the ISDN subsystem (or NO).
326isdn_fsdev="NO" # Output device for fullscreen mode (or NO for daemon mode).
327isdn_flags="-dn -d0x1f9" # Flags for isdnd
328isdn_ttype="cons25" # terminal type for fullscreen mode
329isdn_screenflags="NO" # screenflags for ${isdn_fsdev}
330isdn_trace="NO" # Enable the ISDN trace subsystem (or NO).
331isdn_traceflags="-f /var/tmp/isdntrace0" # Flags for isdntrace
332
333### Bluetooth ###
334hcsecd_enable="NO" # Enable hcsecd(8) (or NO)
335hcsecd_config="/etc/bluetooth/hcsecd.conf" # hcsecd(8) configuration file
336
337sdpd_enable="NO" # Enable sdpd(8) (or NO)
338sdpd_control="/var/run/sdp" # sdpd(8) control socket
339sdpd_groupname="nobody" # set spdp(8) user/group to run as after
340sdpd_username="nobody" # it initializes
341
342bthidd_enable="NO" # Enable bthidd(8) (or NO)
343bthidd_config="/etc/bluetooth/bthidd.conf" # bthidd(8) configuration file
344bthidd_hids="/var/db/bthidd.hids" # bthidd(8) known HID devices file
345
346### Miscellaneous network options: ###
347icmp_bmcastecho="NO" # respond to broadcast ping packets
348
349### IPv6 options: ###
350ipv6_enable="NO" # Set to YES to set up for IPv6.
351ipv6_network_interfaces="auto" # List of network interfaces (or "auto").
352ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO).
353#ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068)
354ipv6_static_routes="" # Set to static route list (or leave empty).
355#ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64
356 # route toward loopback interface.
357#ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1"
358ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway.
359ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing daemon.
360ipv6_router="/usr/sbin/route6d" # Name of IPv6 routing daemon.
361ipv6_router_flags="" # Flags to IPv6 routing daemon.
362#ipv6_router_flags="-l" # Example for route6d with only IPv6 site local
363 # addrs.
364#ipv6_router_flags="-q" # If you want to run a routing daemon on an end
365 # node, you should stop advertisement.
366#ipv6_network_interfaces="ed0 ep0" # Examples for router
367 # or static configuration for end node.
368 # Choose correct prefix value.
369#ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr.
370#ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr.
371#ipv6_ifconfig_ed0="fec0:0:0:5::1 prefixlen 64" # Sample manual assign entry
372#ipv6_ifconfig_ed0_alias0="fec0:0:0:5::2 prefixlen 64" # Sample alias entry.
373ipv6_default_interface="NO" # Default output interface for scoped addrs.
374 # Now this works only for IPv6 link local
375 # multicast addrs.
376rtsol_flags="" # Flags to IPv6 router solicitation.
377rtadvd_enable="NO" # Set to YES to enable an IPv6 router
378 # advertisement daemon. If set to YES,
379 # this router becomes a possible candidate
380 # IPv6 default router for local subnets.
381rtadvd_interfaces="" # Interfaces rtadvd sends RA packets.
382mroute6d_enable="NO" # Do IPv6 multicast routing.
383mroute6d_program="/usr/local/sbin/pim6dd" # Name of IPv6 multicast
384 # routing daemon. You need to
385 # install it from package or
386 # port.
387mroute6d_flags="" # Flags to IPv6 multicast routing daemon.
388stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4
389 # tunneling interface. Specify this entry
390 # to enable 6to4 interface.
391stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr,
392 # to limit peer addr range. Effective value
393 # is 0-31.
394stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0.
395 # If you like, you can set "AUTO" for this.
396stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0
397ipv6_faith_prefix="NO" # Set faith prefix to enable a FAITH
398 # IPv6-to-IPv4 TCP translator. You also need
399 # faithd(8) setup.
400ipv6_ipv4mapping="NO" # Set to "YES" to enable IPv4 mapped IPv6 addr
401 # communication. (like ::ffff:a.b.c.d)
402ipv6_firewall_enable="NO" # Set to YES to enable IPv6 firewall
403 # functionality
404ipv6_firewall_script="/etc/rc.firewall6" # Which script to run to set up the IPv6 firewall
405ipv6_firewall_type="UNKNOWN" # IPv6 Firewall type (see /etc/rc.firewall6)
406ipv6_firewall_quiet="NO" # Set to YES to suppress rule display
407ipv6_firewall_logging="NO" # Set to YES to enable events logging
408ipv6_firewall_flags="" # Flags passed to ip6fw when type is a file
409ipv6_ipfilter_rules="/etc/ipf6.rules" # rules definition file for ipfilter,
410 # see /usr/src/contrib/ipfilter/rules
411 # for examples
412ip6addrctl_enable="NO" # Set to YES to enable default address selection
413ip6addrctl_verbose="NO" # Set to YES to enable verbose configuration messages
414
415##############################################################
416### System console options #################################
417##############################################################
418
419keyboard="" # keyboard device to use (default /dev/kbd0).
420keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO).
421keyrate="NO" # keyboard rate to: slow, normal, fast (or NO).
422keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable.
423keychange="NO" # function keys default values (or NO).
424cursor="NO" # cursor type {normal|blink|destructive} (or NO).
425scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO).
426font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO).
427font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO).
428font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO).
429blanktime="300" # blank time (in seconds) or "NO" to turn it off.
430saver="NO" # screen saver: Uses /boot/kernel/${saver}_saver.ko
431moused_nondefault_enable="YES" # Treat non-default mice as enabled unless
432 # specifically overriden in rc.conf(5).
433moused_enable="NO" # Run the mouse daemon.
434moused_type="auto" # See man page for rc.conf(5) for available settings.
435moused_port="/dev/psm0" # Set to your mouse port.
436moused_flags="" # Any additional flags to moused.
437mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your
438 # language code table, specify alternative range
439 # start like mousechar_start=3, see vidcontrol(1)
440allscreens_flags="" # Set this vidcontrol mode for all virtual screens
441allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens
442
443##############################################################
444### Mail Transfer Agent (MTA) options ######################
445##############################################################
446
447mta_start_script="/etc/rc.sendmail"
448 # Script to start your chosen MTA, called by /etc/rc.
449# Settings for /etc/rc.sendmail and /etc/rc.d/sendmail:
450sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO).
451sendmail_pidfile="/var/run/sendmail.pid" # sendmail pid file
452sendmail_procname="/usr/sbin/sendmail" # sendmail process name
453sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server)
454sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission
455sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost"
456 # Flags for localhost-only MTA
457sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO).
458sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only)
459sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO).
460sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m"
461 # Flags for sendmail_msp_queue daemon.
462
463
464##############################################################
465### Miscellaneous administrative options ###################
466##############################################################
467
468auditd_enable="NO" # Run the audit daemon.
469auditd_flags="" # Which options to pass to the audit daemon.
470cached_enable="NO" # Run the nsswitch caching daemon.
471cron_enable="YES" # Run the periodic job daemon.
472cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled).
473cron_dst="YES" # Handle DST transitions intelligently (YES/NO)
474cron_flags="" # Which options to pass to the cron daemon.
475lpd_enable="NO" # Run the line printer daemon.
476lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one.
477lpd_flags="" # Flags to lpd (if enabled).
478chkprintcap_enable="NO" # Run chkprintcap(8) before running lpd.
479chkprintcap_flags="-d" # Create missing directories by default.
480dumpdev="AUTO" # Device to crashdump to (device name, AUTO, or NO).
481dumpdir="/var/crash" # Directory where crash dumps are to be stored
482savecore_flags="" # Used if dumpdev is enabled above, and present.
483enable_quotas="NO" # turn on quotas on startup (or NO).
484check_quotas="YES" # Check quotas on startup (or NO).
485accounting_enable="NO" # Turn on process accounting (or NO).
486ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO).
487ibcs2_loaders="coff" # List of additional Ibcs2 loaders (or NO).
488
489# Emulation/compatibility services provided by /etc/rc.d/abi
490sysvipc_enable="NO" # Load System V IPC primitives at startup (or NO).
491linux_enable="NO" # Linux binary compatibility loaded at startup (or NO).
492svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO).
493
494clear_tmp_enable="NO" # Clear /tmp at startup.
495clear_tmp_X="YES" # Clear and recreate X11-related directories in /tmp
496ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks
497ldconfig_paths="/usr/lib/compat /usr/X11R6/lib /usr/local/lib /usr/local/lib/compat/pkg"
498 # shared library search paths
499ldconfig32_paths="/usr/lib32" # 32-bit compatibility shared library search paths
500ldconfig_paths_aout="/usr/lib/compat/aout /usr/X11R6/lib/aout /usr/local/lib/aout"
501 # a.out shared library search paths
502ldconfig_local_dirs="/usr/local/libdata/ldconfig /usr/X11R6/libdata/ldconfig"
503 # Local directories with ldconfig configuration files.
504ldconfig_local32_dirs="/usr/local/libdata/ldconfig32 /usr/X11R6/libdata/ldconfig32"
505 # Local directories with 32-bit compatibility ldconfig
506 # configuration files.
507kern_securelevel_enable="NO" # kernel security level (see init(8)),
508kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure
509 # Note that setting securelevel to 0 will result
510 # in the system booting with securelevel set to 1, as
511 # init(8) will raise the level when rc(8) completes.
512update_motd="YES" # update version info in /etc/motd (or NO)
513entropy_file="/entropy" # Set to NO to disable caching entropy through reboots.
514 # /var/db/entropy-file is preferred if / is not avail.
515entropy_dir="/var/db/entropy" # Set to NO to disable caching entropy via cron.
516entropy_save_sz="2048" # Size of the entropy cache files.
517entropy_save_num="8" # Number of entropy cache files to save.
518harvest_interrupt="YES" # Entropy device harvests interrupt randomness
519harvest_ethernet="YES" # Entropy device harvests ethernet randomness
520harvest_p_to_p="YES" # Entropy device harvests point-to-point randomness
521dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot
522watchdogd_enable="NO" # Start the software watchdog daemon
523devfs_rulesets="/etc/defaults/devfs.rules /etc/devfs.rules" # Files containing
524 # devfs(8) rules.
525devfs_system_ruleset="" # The name of a ruleset to apply to /dev
526devfs_set_rulesets="" # A list of /mount/dev=ruleset_name settings to
527 # apply (must be mounted already, i.e. fstab(5))
528performance_cx_lowest="HIGH" # Online CPU idle state
529performance_cpu_freq="NONE" # Online CPU frequency
530economy_cx_lowest="HIGH" # Offline CPU idle state
531economy_cpu_freq="NONE" # Offline CPU frequency
532virecover_enable="YES" # Perform housekeeping for the vi(1) editor
533ugidfw_enable="NO" # Load mac_bsdextended(4) rules on boot
534bsdextended_script="/etc/rc.bsdextended" # Default mac_bsdextended(4)
535 # ruleset file.
536newsyslog_enable="YES" # Run newsyslog at startup.
537newsyslog_flags="-CN" # Newsyslog flags to create marked files
|
539
540##############################################################
541### Jail Configuration #######################################
542##############################################################
543jail_enable="NO" # Set to NO to disable starting of any jails
544jail_list="" # Space separated list of names of jails
545jail_set_hostname_allow="YES" # Allow root user in a jail to change its hostname
546jail_socket_unixiproute_only="YES" # Route only TCP/IP within a jail
547jail_sysvipc_allow="NO" # Allow SystemV IPC use from within a jail
548
549#
550# To use rc's built-in jail infrastructure create entries for
551# each jail, specified in jail_list, with the following variables.
552# NOTES:
553# - replace 'example' with the jail's name.
554# - except rootdir, hostname and ip, all of the following variables may be made
555# global jail variables if you don't specify a jail name (ie. jail_interface).
556#
557#jail_example_rootdir="/usr/jail/default" # Jail's root directory
558#jail_example_hostname="default.domain.com" # Jail's hostname
559#jail_example_ip="192.168.0.10" # Jail's IP number
560#jail_example_interface="" # Interface to create the IP alias on
561#jail_example_exec_start="/bin/sh /etc/rc" # command to execute in jail for starting
562#jail_example_exec_afterstart0="/bin/sh command" # command to execute after the one for
563 # starting the jail. More than one can be
564 # specified using a trailing number
565#jail_example_exec_stop="/bin/sh /etc/rc.shutdown" # command to execute in jail for stopping
566#jail_example_devfs_enable="NO" # mount devfs in the jail
567#jail_example_fdescfs_enable="NO" # mount fdescfs in the jail
568#jail_example_procfs_enable="NO" # mount procfs in jail
569#jail_example_mount_enable="NO" # mount/umount jail's fs
570#jail_example_devfs_ruleset="ruleset_name" # devfs ruleset to apply to jail
571#jail_example_fstab="" # fstab(5) for mount/umount
572#jail_example_flags="-l -U root" # flags for jail(8)
573
574##############################################################
575### Define source_rc_confs, the mechanism used by /etc/rc.* ##
576### scripts to source rc_conf_files overrides safely. ##
577##############################################################
578
579if [ -z "${source_rc_confs_defined}" ]; then
580 source_rc_confs_defined=yes
581 source_rc_confs () {
582 local i sourced_files
583 for i in ${rc_conf_files}; do
584 case ${sourced_files} in
585 *:$i:*)
586 ;;
587 *)
588 sourced_files="${sourced_files}:$i:"
589 if [ -r $i ]; then
590 . $i
591 fi
592 ;;
593 esac
594 done
595 }
596fi
|