1if [ ! "$_PACKAGES_PACKAGES_SUBR" ]; then _PACKAGES_PACKAGES_SUBR=1 2# 3# Copyright (c) 2013 Devin Teske 4# All Rights Reserved. 5# 6# Redistribution and use in source and binary forms, with or without 7# modification, are permitted provided that the following conditions 8# are met: 9# 1. Redistributions of source code must retain the above copyright 10# notice, this list of conditions and the following disclaimer. 11# 2. Redistributions in binary form must reproduce the above copyright 12# notice, this list of conditions and the following disclaimer in the 13# documentation and/or other materials provided with the distribution. 14# 15# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 16# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO, THE 17# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 18# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 19# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 20# DAMAGES (INLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 21# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 22# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 23# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 24# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 25# SUCH DAMAGE. 26#
| 1if [ ! "$_PACKAGES_PACKAGES_SUBR" ]; then _PACKAGES_PACKAGES_SUBR=1 2# 3# Copyright (c) 2013 Devin Teske 4# All Rights Reserved. 5# 6# Redistribution and use in source and binary forms, with or without 7# modification, are permitted provided that the following conditions 8# are met: 9# 1. Redistributions of source code must retain the above copyright 10# notice, this list of conditions and the following disclaimer. 11# 2. Redistributions in binary form must reproduce the above copyright 12# notice, this list of conditions and the following disclaimer in the 13# documentation and/or other materials provided with the distribution. 14# 15# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 16# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO, THE 17# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 18# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 19# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 20# DAMAGES (INLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 21# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 22# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 23# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 24# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 25# SUCH DAMAGE. 26#
|
27# $FreeBSD: head/usr.sbin/bsdconfig/share/packages/packages.subr 251361 2013-06-04 03:30:44Z dteske $
| 27# $FreeBSD: head/usr.sbin/bsdconfig/share/packages/packages.subr 251758 2013-06-14 19:35:30Z dteske $
|
28# 29############################################################ INCLUDES 30 31BSDCFG_SHARE="/usr/share/bsdconfig" 32. $BSDCFG_SHARE/common.subr || exit 1 33f_dprintf "%s: loading includes..." "$0" 34f_include $BSDCFG_SHARE/dialog.subr 35f_include $BSDCFG_SHARE/strings.subr 36f_include $BSDCFG_SHARE/packages/categories.subr 37f_include $BSDCFG_SHARE/packages/index.subr 38 39BSDCFG_LIBE="/usr/libexec/bsdconfig" 40f_include_lang $BSDCFG_LIBE/include/messages.subr 41 42############################################################ CONFIGURATION 43 44# 45# How many packages to display (maximum) per dialog menubox. 46# 47: ${PACKAGE_MENU_PAGESIZE:=2000} 48 49############################################################ GLOBALS 50 51PACKAGE_CATEGORIES= 52SELECTED_PACKAGES= 53 54# 55# Options 56# 57[ "${SHOW_DESC+set}" ] || SHOW_DESC=1 58 59############################################################ FUNCTIONS 60 61# eval f_package_accent_category_menu $var_to_set $CATEGORY_MENU_LIST 62# 63# Accent the CATEGORY_MENU_LIST produced by f_index_read() (see 64# packages/index.subr). Accented information includes adding an asterisk to the 65# category name if its index has been cached, adding the number of installed 66# packages for each category, and adding the number _selected_ packages for 67# each category. 68# 69# NOTE: The reason `eval' is recommended/shown for the syntax above is because 70# the $CATEGORY_MENU_LIST generated by f_index_read() is meant to be expanded 71# prior to execution (it contains a series of pre-quoted strings which act as 72# the interpolated command arguments). 73# 74f_package_accent_category_menu() 75{ 76 local var_to_set="$1" category cat desc help varcat menu_buf n 77 shift 1 # var_to_set 78 while [ $# -gt 0 ]; do 79 category="${1%\*}" desc="${2%%; *}" help="$3" 80 shift 3 # cat/desc/help 81 82 cat="${category# }" # Trim lead space inserted by sort-method 83 f_str2varname "$cat" varcat 84 85 # Add number of installed packages for this category (if any) 86 n=0 87 case "$cat" in 88 "$msg_all") debug= f_getvar "_All_ninstalled" n ;; 89 *) debug= f_getvar "_${varcat}_ninstalled" n ;; 90 esac && 91 [ $n -ge 1 ] && desc="$desc; $n $msg_installed_lc" 92 93 # Add number of selected packages for this category (if any) 94 n=0 95 case "$cat" in 96 "$msg_all") debug= f_getvar "_All_nselected" n ;; 97 *) debug= f_getvar "_${varcat}_nselected" n ;; 98 esac && 99 [ $n -ge 1 ] && desc="$desc; $n $msg_selected" 100 101 # Re-Add asterisk to the category if its index has been cached 102 f_isset _index_page_${varcat}_1 && category="$category*" 103 104 # Update buffer with modified elements 105 menu_buf="$menu_buf 106 '$category' '$desc' '$help'" # End-Quote 107 done 108 setvar "$var_to_set" "$menu_buf" # return our buffer 109} 110 111# f_package_select $package ... 112# 113# Add $package to the list of tracked/selected packages. If $package is already 114# being tracked (already apears in $SELECTED_PACKAGES), this function amounts 115# to having no effect. 116# 117f_package_select() 118{ 119 local package pkgsel 120 while [ $# -gt 0 ]; do 121 package="$1" 122 shift 1 # package 123 for pkgsel in $SELECTED_PACKAGES; do 124 [ "$package" = "$pkgsel" ] && return 125 done 126 SELECTED_PACKAGES="$SELECTED_PACKAGES $package" 127 done 128 SELECTED_PACKAGES="${SELECTED_PACKAGES# }" # Trim leading space 129} 130 131# f_package_deselect $package ... 132# 133# Remove $package from teh list of tracked/selected packages. If $package is 134# not being tracked (doesn't appear in $SELECTED_PACKAGES), this function 135# amounts to having no effet. 136# 137f_package_deselect() 138{ 139 local package pkgsel 140 while [ $# -gt 1 ]; do 141 local new_list="" 142 package="$1" 143 shift 1 # package 144 for pkgsel in $SELECTED_PACKAGES; do 145 [ "$pkgsel" = "$package" ] && continue 146 new_list="$new_list${new_list:+ }$pkgsel" 147 done 148 SELECTED_PACKAGES="$new_list" 149 done 150} 151 152# f_package_detect_installed 153# 154# Detect installed packages. Currently this searches /var/db/pkg for directory 155# entries and marks each entry as an installed/selected package. 156# 157f_package_detect_installed() 158{ 159 local installed package varpkg 160 installed=$( find -s /var/db/pkg -mindepth 1 -maxdepth 1 -type d | 161 sed -e 's:/var/db/pkg/::' ) 162 for package in $installed; do 163 f_str2varname $package varpkg 164 export _mark_$varpkg=X # exported for awk(1) ENVIRON[] 165 f_package_select $package 166 done 167} 168 169# f_package_calculate_totals 170# 171# Calculate number of installed/selected packages for each category listed in 172# $PACKAGE_CATEGORIES (the number of installed packages for $category is stored 173# as $_${varcat}_ninstalled -- where $varcat is the product of `f_str2varname 174# $category varcat' -- and number selected packages as $_${varcat}_nselected). 175# Also calculates the total number of installed/selected packages stored as 176# $_All_ninstalled and $_All_nselected. 177# 178# Calculations are peformed by checking "marks". A "mark" is stored as 179# $_mark_$varpkg -- where $varpkg is the product of `f_str2varname $package 180# varpkg'. A mark can be "X" for an installed package, `I' for a package that 181# is marked for installation, "R" for a package that is marked for re-install, 182# and "U" for a package that is marked for uninstallation. If a package mark is 183# NULL or a single space (e.g., " "), the package is considered to be NOT 184# selected (and therefore does not increment the counts calculated herein). 185# 186f_package_calculate_totals() 187{ 188 local pkg varpkg mark cat varcat pkgcat n tselected=0 tinstalled=0 189 for cat in $PACKAGE_CATEGORIES; do 190 f_str2varname $cat varcat 191 setvar _${varcat}_ninstalled=0 192 setvar _${varcat}_nselected=0 193 done 194 for pkg in $SELECTED_PACKAGES; do 195 f_str2varname $pkg varpkg 196 mark= 197 f_getvar _mark_$varpkg mark 198 case "$mark" in 199 ""|" ") : ;; 200 X) tinstalled=$(( $tinstalled + 1 ));; 201 *) tselected=$(( $tselected + 1 )) 202 esac 203 f_getvar _categories_$varpkg pkgcat 204 for cat in $pkgcat; do 205 f_str2varname $cat varcat 206 case "$mark" in 207 ""|" ") : ;; 208 X) debug= f_getvar _${varcat}_ninstalled n 209 setvar _${varcat}_ninstalled $(( $n + 1 ));; 210 *) debug= f_getvar _${varcat}_nselected n 211 setvar _${varcat}_nselected $(( $n + 1 )) 212 esac 213 done 214 done 215 _All_nselected=$tselected 216 _All_ninstalled=$tinstalled 217} 218 219# f_package_calculate_rundeps 220# 221# Update package dependencies by first unmarking all dependencies and then 222# re-marking all dependencies of packages marked for either install ("I") or 223# re-install ("R"). 224# 225f_package_calculate_rundeps() 226{ 227 local pkg varpkg mark rundeps dep vardep 228 229 # 230 # First unmark all the existing run-dependencies 231 # 232 f_dprintf "Unselecting package run-dependencies..." 233 for pkg in $SELECTED_PACKAGES; do 234 f_str2varname $pkg varpkg 235 mark= 236 debug= f_getvar _mark_$varpkg mark 237 # Only unmark if it's marked as a Dependency 238 if [ "$mark" = "D" ]; then 239 f_dprintf "%s unselected" $pkg 240 unset _mark_$varpkg 241 f_package_deselect $pkg 242 fi 243 done 244 245 # 246 # Processes selected packages, adding dependencies 247 # 248 f_dprintf "Re-selecting package run-dependencies..." 249 for pkg in $SELECTED_PACKAGES; do 250 f_str2varname $pkg varpkg 251 mark= 252 debug= f_getvar _mark_$varpkg mark 253 # Skip pkg unless marked for [Re-]Install 254 [ "$mark" = "I" -o "$mark" = "R" ] || continue 255 f_getvar _rundeps_$varpkg rundeps 256 for dep in $rundeps; do 257 f_str2varname $dep vardep 258 mark= 259 debug= f_getvar _mark_$vardep mark 260 # Skip dep if already marked 261 [ "${mark:- }" = " " ] || continue 262 export _mark_$vardep="D" 263 f_package_select $dep 264 done 265 done 266 267 f_dprintf "Finished recalculating dependencies." 268} 269 270# f_package_menu_categories $var_to_set $defaultitem 271# 272# Dislay the menu of package categories, complete with package counts for each 273# category, accents, and other miscellany. If $defaultitem is non-NULL and 274# matches one of the existing menu-items, it will be pre-highlighted in the 275# menu dialog (HINT: Use f_dialog_menutag_fetch() to populate a local variable 276# that is passed as $defaultitem to highlight the user's last selection). 277# 278f_package_menu_categories() 279{ 280 local var_to_get="$1" defaultitem="$2" 281 local prompt="$msg_please_select_a_category_to_display" 282 local menu_list=" 283 '> $msg_review' '$msg_review_desc' '$msg_review_help' 284 " # End-Quote 285 local hline= 286 287 f_package_calculate_rundeps 288 # updates package mark variables and SELECTED_PACKAGES 289 f_package_calculate_totals 290 # creates _{varcat}_ninstalled and _{varcat}_nselected 291 292 local category_list 293 debug= f_getvar "$var_to_get" category_list || return $FAILURE 294 295 # Accent the category menu list with ninstalled/nselected 296 eval f_package_accent_category_menu category_list $category_list 297 298 # Add list of categories to menu list 299 menu_list="$menu_list $category_list" 300 301 local height width rows 302 eval f_dialog_menu_with_help_size height width rows \ 303 \"\$DIALOG_TITLE\" \ 304 \"\$DIALOG_BACKTITLE\" \ 305 \"\$prompt\" \ 306 \"\$hline\" \ 307 $menu_list 308 local menu_choice 309 menu_choice=$( eval $DIALOG \ 310 --title \"\$DIALOG_TITLE\" \ 311 --backtitle \"\$DIALOG_BACKTITLE\" \ 312 --hline \"\$hline\" \ 313 --item-help \ 314 --default-item \"\$defaultitem\" \ 315 --ok-label \"$msg_select\" \ 316 --cancel-label \"$msg_cancel\" \ 317 --menu \"\$prompt\" \ 318 $height $width $rows \ 319 $menu_list \ 320 2>&1 >&$DIALOG_TERMINAL_PASSTHRU_FD 321 ) 322 local retval=$? 323 f_dialog_menutag_store -s "$menu_choice" 324 return $retval 325} 326 327# f_package_index_get_page $category $page [$var_to_set [$var_to_get]] 328# 329# Obtain a [potentially cached] page of the INDEX file for a given $category. 330# If $page is 1 and the cache has not yet been generated, the cache-generating 331# function f_index_extract_pages() (above) is called to generate all pages 332# (not just the requested page) in cache before returning the requested page. 333# If $page is not 1 and there is no cached page, failure status is returned. 334# 335f_package_index_get_page() 336{ 337 local category="$1" page="$2" var_to_set="$3" var_to_get="$4" varcat 338 f_str2varname "$category" varcat 339 if ! debug= f_getvar "_index_page_${varcat}_$page" $var_to_set && 340 [ "$page" = "1" ] 341 then 342 f_show_info "$msg_building_package_menus" 343 local pagesize="$PACKAGE_MENU_PAGESIZE" 344 f_index_extract_pages "${var_to_get:-PACKAGE_INDEX}" \ 345 _index_page_${varcat} "$pagesize" "$category" 346 debug= f_getvar _index_page_${varcat}_$page $var_to_set 347 348 # Update category default-item because now we're cached 349 [ $page -eq 1 ] && 350 category_defaultitem="${category_defaultitem%\*}*" 351 else 352 return $FAILURE 353 fi 354} 355 356# f_package_menu_select $category [$page [$defaultitem]] 357# 358# Display list of packages for $category, optionally $page N and with a default 359# item selected. If $page is omitted, the first page is displayed (but this 360# only matters if there are multiple pages; which is determined by the global 361# maximum $PACKAGE_MENU_PAGESIZE). 362# 363# On success, if the user doesn't press ESC or choose Cancel, use 364# f_dialog_menuitem_fetch() to populate a local variable with the item (not 365# tag) corresponding to the user's selection. The tag portion of the user's 366# selection is available through f_dialog_menutag_fetch(). 367# 368f_package_menu_select() 369{ 370 local category="$1" page="${2:-1}" 371 local prompt= # Calculated below 372 local menu_list # Calculated below 373 local defaultitem="$3" 374 local hline="$hline_arrows_tab_punc_enter" 375 376 f_isinteger "$page" || return $FAILURE 377 378 local varcat 379 f_str2varname "$category" varcat 380 381 # Get number of packages for this category 382 local npkgs=0 383 case "$category" in 384 "$msg_all"|"") npkgs="${_npkgs:-0}";; 385 *) f_getvar _npkgs_$varcat npkgs 386 esac 387 388 # Calculate number of pages 389 local npages=$(( ${npkgs:=0} / $PACKAGE_MENU_PAGESIZE )) 390 391 # Add a page to the pagecount if not evenly divisible 392 [ $(( $npages * $PACKAGE_MENU_PAGESIZE )) -lt $npkgs ] && 393 npages=$(( $npages + 1 )) 394 395 # Print some debugging information 396 f_dprintf "f_package_menu_select: category=[%s] npkgs=%u npages=%u" \ 397 "$category" "$npkgs" "$npages" 398 399 local add_prev="" add_next="" 400 local previous_page="$msg_previous_page" next_page="$msg_next_page" 401 if [ $page -gt 1 ]; then 402 add_prev=1 403 # Accent the `Previous Page' item with an asterisk 404 # if the page-before-previous is loaded/cached 405 f_isset _index_page_${varcat}_$(( $page - 1 )) && 406 previous_page="$previous_page*" 407 fi 408 if [ $page -lt $npages ]; then 409 add_next=1 410 # Accent the `Next Page' item with an asterisk 411 # if the page-after-next is loaded/cached 412 f_isset _index_page_${varcat}_$(( $page + 1 )) && 413 next_page="$next_page*" 414 fi 415 416 local index_page 417 f_package_index_get_page "$category" $page index_page 418 419 menu_list=" 420 ${add_prev:+'> $previous_page' '' ${SHOW_DESC:+''}} 421 ${add_next:+'> $next_page' '' ${SHOW_DESC:+''}} 422 $( 423 export SHOW_DESC 424 export VALID_VARNAME_CHARS 425 echo "$index_page" | awk -F'|' -v view="port" ' 426 BEGIN { 427 valid_chars = ENVIRON["VALID_VARNAME_CHARS"] 428 prefix = "" 429 } 430 { 431 cur_prefix = tolower(substr($1, 1, 1)) 432 printf "'\''" 433 if ( prefix != cur_prefix ) 434 prefix = cur_prefix 435 else 436 printf " " 437 package = $1 438 if ( view == "port" ) 439 desc = $2 440 varpkg = package 441 gsub("[^" valid_chars "]", "_", varpkg) 442 mark = ENVIRON["_mark_" varpkg] 443 if ( ! mark ) mark = " " 444 printf "%s'\'' '\''[%c] %s'\''", 445 package, mark, desc 446 if ( ENVIRON["SHOW_DESC"] ) { 447 help = $4 448 gsub(/'\''/, "'\''\\'\'\''", help) 449 printf " '\''%s'\''", help 450 } 451 printf "\n" 452 }' 453 ) 454 ${add_prev:+'> $previous_page' '' ${SHOW_DESC:+''}} 455 ${add_next:+'> $next_page' '' ${SHOW_DESC:+''}} 456 " # End-Quote 457 458 # Accept/Translate i18n "All" but other category names must 459 # match tree definitions from INDEX, ports, FTP, etc. 460 case "$category" in 461 "$msg_all"|"") f_category_desc_get "All" prompt ;; 462 *) f_category_desc_get "$category" prompt ;; 463 esac 464 prompt="$prompt $( printf "$msg_page_of_npages" \ 465 "$page" "$npages" )" 466 467 local mheight mwidth mrows 468 eval f_dialog_menu${SHOW_DESC:+_with_help}_size mheight mwidth mrows \ 469 \"\$DIALOG_TITLE\" \"\$DIALOG_BACKTITLE\" \ 470 \"\$prompt\" \"\$hline\" $menu_list 471 local iheight iwidth 472 f_dialog_infobox_size iheight iwidth \ 473 "$DIALOG_TITLE" "$DIALOG_BACKTITLE" \ 474 "$msg_processing_selection" 475 476 local menu_choice 477 menu_choice=$( eval $DIALOG \ 478 --title \"\$DIALOG_TITLE\" \ 479 --backtitle \"\$DIALOG_BACKTITLE\" \ 480 --hline \"\$hline\" \ 481 --keep-tite \ 482 --ok-label \"$msg_select\" \ 483 --cancel-label \"$msg_back\" \ 484 ${SHOW_DESC:+--item-help} \ 485 --default-item \"\$defaultitem\" \ 486 --menu \"\$prompt\" \ 487 $mheight $mwidth $mrows \ 488 $menu_list \ 489 --and-widget \ 490 ${USE_XDIALOG:+--no-buttons} \ 491 --infobox \"\$msg_processing_selection\" \ 492 $iheight $iwidth \ 493 2>&1 >&$DIALOG_TERMINAL_PASSTHRU_FD 494 ) 495 local retval=$? 496 f_dialog_data_sanitize menu_choice 497 f_dialog_menutag_store "$menu_choice" 498 499 if [ $retval -eq $SUCCESS ]; then 500 local item 501 item=$( eval f_dialog_menutag2item${SHOW_DESC:+_with_help} \ 502 \"\$menu_choice\" $menu_list ) 503 f_dialog_menuitem_store "$item" 504 fi 505 506 return $retval 507} 508 509# f_package_menu_deselect $package 510# 511# Display a menu, asking the user what they would like to do with $package 512# with regard to "deselecting" an already installed package. Choices include 513# uninstall, re-install, or cancel (leave $package marked as installed). 514# Returns success if the user does not press ESC or choose Cnacel. Use the 515# f_dialog_menutag_fetch() function upon success to retrieve the user's choice. 516# 517f_package_menu_deselect() 518{ 519 local package="$1" 520 local prompt # Calculated below 521 local menu_list=" 522 'X $msg_installed' '$msg_installed_desc' 523 'R $msg_reinstall' '$msg_reinstall_desc' 524 'U $msg_uninstall' '$msg_uninstall_desc' 525 " # End-Quote 526 local hline="$hline_alnum_arrows_punc_tab_enter" 527 528 prompt=$( printf "$msg_what_would_you_like_to_do_with" "$package" ) 529 530 local height width rows 531 eval f_dialog_menu_size height width rows \ 532 \"\$DIALOG_TITLE\" \ 533 \"\$DIALOG_BACKTITLE\" \ 534 \"\$prompt\" \ 535 \"\$hline\" \ 536 $menu_list 537 local menu_choice 538 menu_choice=$( eval $DIALOG \ 539 --title \"\$DIALOG_TITLE\" \ 540 --backtitle \"\$DIALOG_BACKTITLE\" \ 541 --hline \"\$hline\" \ 542 --ok-label \"$msg_select\" \ 543 --cancel-label \"$msg_cancel\" \ 544 --menu \"\$prompt\" \ 545 $height $width $rows \ 546 $menu_list \ 547 2>&1 >&$DIALOG_TERMINAL_PASSTHRU_FD 548 ) 549 local retval=$? 550 f_dialog_menutag_store -s "$menu_choice" 551 return $retval 552} 553 554# f_package_review 555# 556# Display a review screen, showing selected packages and what they are marked 557# for, before proceeding (if the user does not press ESC or choose Cancel) to 558# operate on each selection. Returns error if no packages have been selected, 559# or the user has pressed ESC, or if they have chosen Cancel. 560# 561f_package_review() 562{ 563 local prompt # Calculated below 564 local menu_list # Calculated below 565 local hline="$hline_alnum_arrows_punc_tab_enter" 566 567 f_dprintf "f_package_review: SELECTED_PACKAGES=[%s]" \ 568 "$SELECTED_PACKAGES" 569 570 prompt=$( printf "$msg_reviewing_selected_packages" "$_All_nselected" ) 571 572 local package varpkg mark 573 for package in $SELECTED_PACKAGES; do 574 mark= 575 f_str2varname "$package" varpkg 576 f_getvar _mark_$varpkg mark 577 [ "$mark" -a ! "${mark#[IRUD]}" ] || continue 578 menu_list="$menu_list 579 '$mark' '$package' 580 " # End-Quote 581 done 582 if [ ! "$menu_list" ]; then 583 f_show_msg "$msg_no_packages_were_selected_for_extraction" 584 return $FAILURE # They might have selected this by accident 585 fi 586 menu_list=$( echo "$menu_list" | sort ) 587 588 local height width rows 589 eval f_dialog_menu_size height width rows \ 590 \"\$DIALOG_TITLE\" \ 591 \"\$DIALOG_BACKTITLE\" \ 592 \"\$prompt\" \ 593 \"\$hline\" \ 594 $menu_list 595 596 # Show the review menu (ignore menu choice) 597 eval $DIALOG \ 598 --title \"\$DIALOG_TITLE\" \ 599 --backtitle \"\$DIALOG_BACKTITLE\" \ 600 --hline \"\$hline\" \ 601 --ok-label \"\$msg_proceed\" \ 602 --cancel-label \"\$msg_cancel\" \ 603 --menu \"\$prompt\" \ 604 $height $width $rows \ 605 $menu_list \
| 28# 29############################################################ INCLUDES 30 31BSDCFG_SHARE="/usr/share/bsdconfig" 32. $BSDCFG_SHARE/common.subr || exit 1 33f_dprintf "%s: loading includes..." "$0" 34f_include $BSDCFG_SHARE/dialog.subr 35f_include $BSDCFG_SHARE/strings.subr 36f_include $BSDCFG_SHARE/packages/categories.subr 37f_include $BSDCFG_SHARE/packages/index.subr 38 39BSDCFG_LIBE="/usr/libexec/bsdconfig" 40f_include_lang $BSDCFG_LIBE/include/messages.subr 41 42############################################################ CONFIGURATION 43 44# 45# How many packages to display (maximum) per dialog menubox. 46# 47: ${PACKAGE_MENU_PAGESIZE:=2000} 48 49############################################################ GLOBALS 50 51PACKAGE_CATEGORIES= 52SELECTED_PACKAGES= 53 54# 55# Options 56# 57[ "${SHOW_DESC+set}" ] || SHOW_DESC=1 58 59############################################################ FUNCTIONS 60 61# eval f_package_accent_category_menu $var_to_set $CATEGORY_MENU_LIST 62# 63# Accent the CATEGORY_MENU_LIST produced by f_index_read() (see 64# packages/index.subr). Accented information includes adding an asterisk to the 65# category name if its index has been cached, adding the number of installed 66# packages for each category, and adding the number _selected_ packages for 67# each category. 68# 69# NOTE: The reason `eval' is recommended/shown for the syntax above is because 70# the $CATEGORY_MENU_LIST generated by f_index_read() is meant to be expanded 71# prior to execution (it contains a series of pre-quoted strings which act as 72# the interpolated command arguments). 73# 74f_package_accent_category_menu() 75{ 76 local var_to_set="$1" category cat desc help varcat menu_buf n 77 shift 1 # var_to_set 78 while [ $# -gt 0 ]; do 79 category="${1%\*}" desc="${2%%; *}" help="$3" 80 shift 3 # cat/desc/help 81 82 cat="${category# }" # Trim lead space inserted by sort-method 83 f_str2varname "$cat" varcat 84 85 # Add number of installed packages for this category (if any) 86 n=0 87 case "$cat" in 88 "$msg_all") debug= f_getvar "_All_ninstalled" n ;; 89 *) debug= f_getvar "_${varcat}_ninstalled" n ;; 90 esac && 91 [ $n -ge 1 ] && desc="$desc; $n $msg_installed_lc" 92 93 # Add number of selected packages for this category (if any) 94 n=0 95 case "$cat" in 96 "$msg_all") debug= f_getvar "_All_nselected" n ;; 97 *) debug= f_getvar "_${varcat}_nselected" n ;; 98 esac && 99 [ $n -ge 1 ] && desc="$desc; $n $msg_selected" 100 101 # Re-Add asterisk to the category if its index has been cached 102 f_isset _index_page_${varcat}_1 && category="$category*" 103 104 # Update buffer with modified elements 105 menu_buf="$menu_buf 106 '$category' '$desc' '$help'" # End-Quote 107 done 108 setvar "$var_to_set" "$menu_buf" # return our buffer 109} 110 111# f_package_select $package ... 112# 113# Add $package to the list of tracked/selected packages. If $package is already 114# being tracked (already apears in $SELECTED_PACKAGES), this function amounts 115# to having no effect. 116# 117f_package_select() 118{ 119 local package pkgsel 120 while [ $# -gt 0 ]; do 121 package="$1" 122 shift 1 # package 123 for pkgsel in $SELECTED_PACKAGES; do 124 [ "$package" = "$pkgsel" ] && return 125 done 126 SELECTED_PACKAGES="$SELECTED_PACKAGES $package" 127 done 128 SELECTED_PACKAGES="${SELECTED_PACKAGES# }" # Trim leading space 129} 130 131# f_package_deselect $package ... 132# 133# Remove $package from teh list of tracked/selected packages. If $package is 134# not being tracked (doesn't appear in $SELECTED_PACKAGES), this function 135# amounts to having no effet. 136# 137f_package_deselect() 138{ 139 local package pkgsel 140 while [ $# -gt 1 ]; do 141 local new_list="" 142 package="$1" 143 shift 1 # package 144 for pkgsel in $SELECTED_PACKAGES; do 145 [ "$pkgsel" = "$package" ] && continue 146 new_list="$new_list${new_list:+ }$pkgsel" 147 done 148 SELECTED_PACKAGES="$new_list" 149 done 150} 151 152# f_package_detect_installed 153# 154# Detect installed packages. Currently this searches /var/db/pkg for directory 155# entries and marks each entry as an installed/selected package. 156# 157f_package_detect_installed() 158{ 159 local installed package varpkg 160 installed=$( find -s /var/db/pkg -mindepth 1 -maxdepth 1 -type d | 161 sed -e 's:/var/db/pkg/::' ) 162 for package in $installed; do 163 f_str2varname $package varpkg 164 export _mark_$varpkg=X # exported for awk(1) ENVIRON[] 165 f_package_select $package 166 done 167} 168 169# f_package_calculate_totals 170# 171# Calculate number of installed/selected packages for each category listed in 172# $PACKAGE_CATEGORIES (the number of installed packages for $category is stored 173# as $_${varcat}_ninstalled -- where $varcat is the product of `f_str2varname 174# $category varcat' -- and number selected packages as $_${varcat}_nselected). 175# Also calculates the total number of installed/selected packages stored as 176# $_All_ninstalled and $_All_nselected. 177# 178# Calculations are peformed by checking "marks". A "mark" is stored as 179# $_mark_$varpkg -- where $varpkg is the product of `f_str2varname $package 180# varpkg'. A mark can be "X" for an installed package, `I' for a package that 181# is marked for installation, "R" for a package that is marked for re-install, 182# and "U" for a package that is marked for uninstallation. If a package mark is 183# NULL or a single space (e.g., " "), the package is considered to be NOT 184# selected (and therefore does not increment the counts calculated herein). 185# 186f_package_calculate_totals() 187{ 188 local pkg varpkg mark cat varcat pkgcat n tselected=0 tinstalled=0 189 for cat in $PACKAGE_CATEGORIES; do 190 f_str2varname $cat varcat 191 setvar _${varcat}_ninstalled=0 192 setvar _${varcat}_nselected=0 193 done 194 for pkg in $SELECTED_PACKAGES; do 195 f_str2varname $pkg varpkg 196 mark= 197 f_getvar _mark_$varpkg mark 198 case "$mark" in 199 ""|" ") : ;; 200 X) tinstalled=$(( $tinstalled + 1 ));; 201 *) tselected=$(( $tselected + 1 )) 202 esac 203 f_getvar _categories_$varpkg pkgcat 204 for cat in $pkgcat; do 205 f_str2varname $cat varcat 206 case "$mark" in 207 ""|" ") : ;; 208 X) debug= f_getvar _${varcat}_ninstalled n 209 setvar _${varcat}_ninstalled $(( $n + 1 ));; 210 *) debug= f_getvar _${varcat}_nselected n 211 setvar _${varcat}_nselected $(( $n + 1 )) 212 esac 213 done 214 done 215 _All_nselected=$tselected 216 _All_ninstalled=$tinstalled 217} 218 219# f_package_calculate_rundeps 220# 221# Update package dependencies by first unmarking all dependencies and then 222# re-marking all dependencies of packages marked for either install ("I") or 223# re-install ("R"). 224# 225f_package_calculate_rundeps() 226{ 227 local pkg varpkg mark rundeps dep vardep 228 229 # 230 # First unmark all the existing run-dependencies 231 # 232 f_dprintf "Unselecting package run-dependencies..." 233 for pkg in $SELECTED_PACKAGES; do 234 f_str2varname $pkg varpkg 235 mark= 236 debug= f_getvar _mark_$varpkg mark 237 # Only unmark if it's marked as a Dependency 238 if [ "$mark" = "D" ]; then 239 f_dprintf "%s unselected" $pkg 240 unset _mark_$varpkg 241 f_package_deselect $pkg 242 fi 243 done 244 245 # 246 # Processes selected packages, adding dependencies 247 # 248 f_dprintf "Re-selecting package run-dependencies..." 249 for pkg in $SELECTED_PACKAGES; do 250 f_str2varname $pkg varpkg 251 mark= 252 debug= f_getvar _mark_$varpkg mark 253 # Skip pkg unless marked for [Re-]Install 254 [ "$mark" = "I" -o "$mark" = "R" ] || continue 255 f_getvar _rundeps_$varpkg rundeps 256 for dep in $rundeps; do 257 f_str2varname $dep vardep 258 mark= 259 debug= f_getvar _mark_$vardep mark 260 # Skip dep if already marked 261 [ "${mark:- }" = " " ] || continue 262 export _mark_$vardep="D" 263 f_package_select $dep 264 done 265 done 266 267 f_dprintf "Finished recalculating dependencies." 268} 269 270# f_package_menu_categories $var_to_set $defaultitem 271# 272# Dislay the menu of package categories, complete with package counts for each 273# category, accents, and other miscellany. If $defaultitem is non-NULL and 274# matches one of the existing menu-items, it will be pre-highlighted in the 275# menu dialog (HINT: Use f_dialog_menutag_fetch() to populate a local variable 276# that is passed as $defaultitem to highlight the user's last selection). 277# 278f_package_menu_categories() 279{ 280 local var_to_get="$1" defaultitem="$2" 281 local prompt="$msg_please_select_a_category_to_display" 282 local menu_list=" 283 '> $msg_review' '$msg_review_desc' '$msg_review_help' 284 " # End-Quote 285 local hline= 286 287 f_package_calculate_rundeps 288 # updates package mark variables and SELECTED_PACKAGES 289 f_package_calculate_totals 290 # creates _{varcat}_ninstalled and _{varcat}_nselected 291 292 local category_list 293 debug= f_getvar "$var_to_get" category_list || return $FAILURE 294 295 # Accent the category menu list with ninstalled/nselected 296 eval f_package_accent_category_menu category_list $category_list 297 298 # Add list of categories to menu list 299 menu_list="$menu_list $category_list" 300 301 local height width rows 302 eval f_dialog_menu_with_help_size height width rows \ 303 \"\$DIALOG_TITLE\" \ 304 \"\$DIALOG_BACKTITLE\" \ 305 \"\$prompt\" \ 306 \"\$hline\" \ 307 $menu_list 308 local menu_choice 309 menu_choice=$( eval $DIALOG \ 310 --title \"\$DIALOG_TITLE\" \ 311 --backtitle \"\$DIALOG_BACKTITLE\" \ 312 --hline \"\$hline\" \ 313 --item-help \ 314 --default-item \"\$defaultitem\" \ 315 --ok-label \"$msg_select\" \ 316 --cancel-label \"$msg_cancel\" \ 317 --menu \"\$prompt\" \ 318 $height $width $rows \ 319 $menu_list \ 320 2>&1 >&$DIALOG_TERMINAL_PASSTHRU_FD 321 ) 322 local retval=$? 323 f_dialog_menutag_store -s "$menu_choice" 324 return $retval 325} 326 327# f_package_index_get_page $category $page [$var_to_set [$var_to_get]] 328# 329# Obtain a [potentially cached] page of the INDEX file for a given $category. 330# If $page is 1 and the cache has not yet been generated, the cache-generating 331# function f_index_extract_pages() (above) is called to generate all pages 332# (not just the requested page) in cache before returning the requested page. 333# If $page is not 1 and there is no cached page, failure status is returned. 334# 335f_package_index_get_page() 336{ 337 local category="$1" page="$2" var_to_set="$3" var_to_get="$4" varcat 338 f_str2varname "$category" varcat 339 if ! debug= f_getvar "_index_page_${varcat}_$page" $var_to_set && 340 [ "$page" = "1" ] 341 then 342 f_show_info "$msg_building_package_menus" 343 local pagesize="$PACKAGE_MENU_PAGESIZE" 344 f_index_extract_pages "${var_to_get:-PACKAGE_INDEX}" \ 345 _index_page_${varcat} "$pagesize" "$category" 346 debug= f_getvar _index_page_${varcat}_$page $var_to_set 347 348 # Update category default-item because now we're cached 349 [ $page -eq 1 ] && 350 category_defaultitem="${category_defaultitem%\*}*" 351 else 352 return $FAILURE 353 fi 354} 355 356# f_package_menu_select $category [$page [$defaultitem]] 357# 358# Display list of packages for $category, optionally $page N and with a default 359# item selected. If $page is omitted, the first page is displayed (but this 360# only matters if there are multiple pages; which is determined by the global 361# maximum $PACKAGE_MENU_PAGESIZE). 362# 363# On success, if the user doesn't press ESC or choose Cancel, use 364# f_dialog_menuitem_fetch() to populate a local variable with the item (not 365# tag) corresponding to the user's selection. The tag portion of the user's 366# selection is available through f_dialog_menutag_fetch(). 367# 368f_package_menu_select() 369{ 370 local category="$1" page="${2:-1}" 371 local prompt= # Calculated below 372 local menu_list # Calculated below 373 local defaultitem="$3" 374 local hline="$hline_arrows_tab_punc_enter" 375 376 f_isinteger "$page" || return $FAILURE 377 378 local varcat 379 f_str2varname "$category" varcat 380 381 # Get number of packages for this category 382 local npkgs=0 383 case "$category" in 384 "$msg_all"|"") npkgs="${_npkgs:-0}";; 385 *) f_getvar _npkgs_$varcat npkgs 386 esac 387 388 # Calculate number of pages 389 local npages=$(( ${npkgs:=0} / $PACKAGE_MENU_PAGESIZE )) 390 391 # Add a page to the pagecount if not evenly divisible 392 [ $(( $npages * $PACKAGE_MENU_PAGESIZE )) -lt $npkgs ] && 393 npages=$(( $npages + 1 )) 394 395 # Print some debugging information 396 f_dprintf "f_package_menu_select: category=[%s] npkgs=%u npages=%u" \ 397 "$category" "$npkgs" "$npages" 398 399 local add_prev="" add_next="" 400 local previous_page="$msg_previous_page" next_page="$msg_next_page" 401 if [ $page -gt 1 ]; then 402 add_prev=1 403 # Accent the `Previous Page' item with an asterisk 404 # if the page-before-previous is loaded/cached 405 f_isset _index_page_${varcat}_$(( $page - 1 )) && 406 previous_page="$previous_page*" 407 fi 408 if [ $page -lt $npages ]; then 409 add_next=1 410 # Accent the `Next Page' item with an asterisk 411 # if the page-after-next is loaded/cached 412 f_isset _index_page_${varcat}_$(( $page + 1 )) && 413 next_page="$next_page*" 414 fi 415 416 local index_page 417 f_package_index_get_page "$category" $page index_page 418 419 menu_list=" 420 ${add_prev:+'> $previous_page' '' ${SHOW_DESC:+''}} 421 ${add_next:+'> $next_page' '' ${SHOW_DESC:+''}} 422 $( 423 export SHOW_DESC 424 export VALID_VARNAME_CHARS 425 echo "$index_page" | awk -F'|' -v view="port" ' 426 BEGIN { 427 valid_chars = ENVIRON["VALID_VARNAME_CHARS"] 428 prefix = "" 429 } 430 { 431 cur_prefix = tolower(substr($1, 1, 1)) 432 printf "'\''" 433 if ( prefix != cur_prefix ) 434 prefix = cur_prefix 435 else 436 printf " " 437 package = $1 438 if ( view == "port" ) 439 desc = $2 440 varpkg = package 441 gsub("[^" valid_chars "]", "_", varpkg) 442 mark = ENVIRON["_mark_" varpkg] 443 if ( ! mark ) mark = " " 444 printf "%s'\'' '\''[%c] %s'\''", 445 package, mark, desc 446 if ( ENVIRON["SHOW_DESC"] ) { 447 help = $4 448 gsub(/'\''/, "'\''\\'\'\''", help) 449 printf " '\''%s'\''", help 450 } 451 printf "\n" 452 }' 453 ) 454 ${add_prev:+'> $previous_page' '' ${SHOW_DESC:+''}} 455 ${add_next:+'> $next_page' '' ${SHOW_DESC:+''}} 456 " # End-Quote 457 458 # Accept/Translate i18n "All" but other category names must 459 # match tree definitions from INDEX, ports, FTP, etc. 460 case "$category" in 461 "$msg_all"|"") f_category_desc_get "All" prompt ;; 462 *) f_category_desc_get "$category" prompt ;; 463 esac 464 prompt="$prompt $( printf "$msg_page_of_npages" \ 465 "$page" "$npages" )" 466 467 local mheight mwidth mrows 468 eval f_dialog_menu${SHOW_DESC:+_with_help}_size mheight mwidth mrows \ 469 \"\$DIALOG_TITLE\" \"\$DIALOG_BACKTITLE\" \ 470 \"\$prompt\" \"\$hline\" $menu_list 471 local iheight iwidth 472 f_dialog_infobox_size iheight iwidth \ 473 "$DIALOG_TITLE" "$DIALOG_BACKTITLE" \ 474 "$msg_processing_selection" 475 476 local menu_choice 477 menu_choice=$( eval $DIALOG \ 478 --title \"\$DIALOG_TITLE\" \ 479 --backtitle \"\$DIALOG_BACKTITLE\" \ 480 --hline \"\$hline\" \ 481 --keep-tite \ 482 --ok-label \"$msg_select\" \ 483 --cancel-label \"$msg_back\" \ 484 ${SHOW_DESC:+--item-help} \ 485 --default-item \"\$defaultitem\" \ 486 --menu \"\$prompt\" \ 487 $mheight $mwidth $mrows \ 488 $menu_list \ 489 --and-widget \ 490 ${USE_XDIALOG:+--no-buttons} \ 491 --infobox \"\$msg_processing_selection\" \ 492 $iheight $iwidth \ 493 2>&1 >&$DIALOG_TERMINAL_PASSTHRU_FD 494 ) 495 local retval=$? 496 f_dialog_data_sanitize menu_choice 497 f_dialog_menutag_store "$menu_choice" 498 499 if [ $retval -eq $SUCCESS ]; then 500 local item 501 item=$( eval f_dialog_menutag2item${SHOW_DESC:+_with_help} \ 502 \"\$menu_choice\" $menu_list ) 503 f_dialog_menuitem_store "$item" 504 fi 505 506 return $retval 507} 508 509# f_package_menu_deselect $package 510# 511# Display a menu, asking the user what they would like to do with $package 512# with regard to "deselecting" an already installed package. Choices include 513# uninstall, re-install, or cancel (leave $package marked as installed). 514# Returns success if the user does not press ESC or choose Cnacel. Use the 515# f_dialog_menutag_fetch() function upon success to retrieve the user's choice. 516# 517f_package_menu_deselect() 518{ 519 local package="$1" 520 local prompt # Calculated below 521 local menu_list=" 522 'X $msg_installed' '$msg_installed_desc' 523 'R $msg_reinstall' '$msg_reinstall_desc' 524 'U $msg_uninstall' '$msg_uninstall_desc' 525 " # End-Quote 526 local hline="$hline_alnum_arrows_punc_tab_enter" 527 528 prompt=$( printf "$msg_what_would_you_like_to_do_with" "$package" ) 529 530 local height width rows 531 eval f_dialog_menu_size height width rows \ 532 \"\$DIALOG_TITLE\" \ 533 \"\$DIALOG_BACKTITLE\" \ 534 \"\$prompt\" \ 535 \"\$hline\" \ 536 $menu_list 537 local menu_choice 538 menu_choice=$( eval $DIALOG \ 539 --title \"\$DIALOG_TITLE\" \ 540 --backtitle \"\$DIALOG_BACKTITLE\" \ 541 --hline \"\$hline\" \ 542 --ok-label \"$msg_select\" \ 543 --cancel-label \"$msg_cancel\" \ 544 --menu \"\$prompt\" \ 545 $height $width $rows \ 546 $menu_list \ 547 2>&1 >&$DIALOG_TERMINAL_PASSTHRU_FD 548 ) 549 local retval=$? 550 f_dialog_menutag_store -s "$menu_choice" 551 return $retval 552} 553 554# f_package_review 555# 556# Display a review screen, showing selected packages and what they are marked 557# for, before proceeding (if the user does not press ESC or choose Cancel) to 558# operate on each selection. Returns error if no packages have been selected, 559# or the user has pressed ESC, or if they have chosen Cancel. 560# 561f_package_review() 562{ 563 local prompt # Calculated below 564 local menu_list # Calculated below 565 local hline="$hline_alnum_arrows_punc_tab_enter" 566 567 f_dprintf "f_package_review: SELECTED_PACKAGES=[%s]" \ 568 "$SELECTED_PACKAGES" 569 570 prompt=$( printf "$msg_reviewing_selected_packages" "$_All_nselected" ) 571 572 local package varpkg mark 573 for package in $SELECTED_PACKAGES; do 574 mark= 575 f_str2varname "$package" varpkg 576 f_getvar _mark_$varpkg mark 577 [ "$mark" -a ! "${mark#[IRUD]}" ] || continue 578 menu_list="$menu_list 579 '$mark' '$package' 580 " # End-Quote 581 done 582 if [ ! "$menu_list" ]; then 583 f_show_msg "$msg_no_packages_were_selected_for_extraction" 584 return $FAILURE # They might have selected this by accident 585 fi 586 menu_list=$( echo "$menu_list" | sort ) 587 588 local height width rows 589 eval f_dialog_menu_size height width rows \ 590 \"\$DIALOG_TITLE\" \ 591 \"\$DIALOG_BACKTITLE\" \ 592 \"\$prompt\" \ 593 \"\$hline\" \ 594 $menu_list 595 596 # Show the review menu (ignore menu choice) 597 eval $DIALOG \ 598 --title \"\$DIALOG_TITLE\" \ 599 --backtitle \"\$DIALOG_BACKTITLE\" \ 600 --hline \"\$hline\" \ 601 --ok-label \"\$msg_proceed\" \ 602 --cancel-label \"\$msg_cancel\" \ 603 --menu \"\$prompt\" \ 604 $height $width $rows \ 605 $menu_list \
|
606 2> /dev/null 607 local retval=$?
| 606 2> /dev/null || return $? 607 # Return if the user pressed ESC or chose Cancel/No
|
608 609 #
| 608 609 #
|
610 # XXX
| 610 # Process each of the selected packages: 611 # + First, process dependencies. 612 # + Second, process packages marked for Install. 613 # + Third, process packages marked for Re-install. 614 # + Finally, process packages marked for Uninstall.
|
611 #
| 615 #
|
612 f_show_msg "Coming soon..." 613 #
| 616 for package in $SELECTED_PACKAGES; do 617 mark= 618 f_str2varname "$package" varpkg 619 f_getvar _mark_$varpkg mark 620 [ "$mark" = "D" ] || continue 621 # XXX Install dependency 622 f_package_deselect "$package" 623 done 624 for package in $SELECTED_PACKAGES; do 625 mark= 626 f_str2varname "$package" varpkg 627 f_getvar _mark_$varpkg mark 628 [ "$mark" = "I" ] || continue 629 # XXX Install package 630 f_package_deselect "$package" 631 done 632 for package in $SELECTED_PACKAGES; do 633 mark= 634 f_str2varname "$package" varpkg 635 f_getvar _mark_$varpkg mark 636 [ "$mark" = "R" ] || continue 637 # XXX Re-install package 638 f_package_deselect "$package" 639 done 640 for package in $SELECTED_PACKAGES; do 641 mark= 642 f_str2varname "$package" varpkg 643 f_getvar _mark_$varpkg mark 644 [ "$mark" = "U" ] || continue 645 # XXX Uninstall package 646 f_package_deselect "$package" 647 done 648
|
614 # XXX
| 649 # XXX
|
615 #
| 650 f_show_msg "Coming soon..."
|
616
| 651
|
617 return $retval
| 652 return $SUCCESS
|
618} 619 620# f_package_config 621# 622# Allow the user to configure packages and install them. Initially, a list of 623# package categories is loaded/displayed. When the user selects a category, 624# the menus for that category are built (unlike sysinstall which built all 625# category menus up-front -- which also took forever, despite the fact that 626# few people visit more than a couple of categories each time). 627# 628f_package_config() 629{ 630 # Did we get an INDEX? 631 f_index_initialize packages/INDEX || return $FAILURE 632 # Creates following variables (indirectly via f_index_read()) 633 # CATEGORY_MENU_LIST _categories_{varpkg} _rundeps_{varpkg} 634 # PACKAGE_CATEGORIES _npkgs 635 636 # Detect installed packages (updates marks/SELECTED_PACKAGES) 637 f_package_detect_installed 638 639 local retval category varcat defaultitem category_defaultitem="" 640 while :; do 641 # Display the list of package categories 642 f_package_menu_categories \ 643 CATEGORY_MENU_LIST "$category_defaultitem" 644 retval=$? 645 f_dialog_menutag_fetch category 646 f_dprintf "retval=%u mtag=[%s]" $retval "$category" 647 category_defaultitem="$category" 648 649 [ $retval -eq $SUCCESS ] || break 650 651 # Maybe the user chose an action (like `Review') 652 case "$category" in 653 "> $msg_review") 654 f_package_review && break 655 continue ;; 656 "> "*) 657 continue 658 esac 659 660 # Anything else is a package category 661 662 category=${category# } # Trim leading space if present 663 category=${category%\*} # Trim trailing asterisk if present 664 665 f_str2varname "$category" varcat 666 667 local page package varpkg mark menu_choice 668 while :; do 669 # Display the list of packages for selected category 670 page=1 defaultitem="" 671 f_getvar _defaultitem_$varcat defaultitem 672 f_getvar _defaultpage_$varcat page 673 f_package_menu_select \ 674 "$category" "${page:=1}" "$defaultitem" 675 retval=$? 676 f_dialog_menutag_fetch menu_choice 677 f_dprintf "retval=%u mtag=[%s]" $retval "$menu_choice" 678 679 # NOTE: When --and-widget is used only ESC will cause 680 # dialog(1) to return without going to the next widget. 681 # This is alright in our case as we can still detect 682 # the Cancel button because stdout will be NULL. 683 # Alternatively, Xdialog(1) will terminate with 1 684 # if/when Cancel is chosen on any widget. 685 if [ $retval -eq 255 -o ! "$menu_choice" ]; then 686 # User pressed ESC or chose Cancel 687 break 688 elif [ $retval -eq 1 ]; then 689 # Using X11, Xdialog(1) returned 1 for Cancel 690 f_show_msg "%s" "$menu_choice" 691 break 692 elif [ $retval -ne $SUCCESS ]; then 693 # X11-related error occurred using Xdialog(1) 694 f_show_msg "%s" "$menu_choice" 695 break 696 fi 697 698 defaultitem="$menu_choice" 699 700 # NOTE: f_package_menu_select() does not show the 701 # `Previous Page' or `Next Page' items unless needed 702 case "$menu_choice" in 703 "> $msg_previous_page"|"> $msg_previous_page*") 704 page=$(( $page - 1 )) 705 setvar _defaultpage_$varcat $page 706 # Update default-item to match accent that will 707 # be applied by f_package_menu_select(); if the 708 # page-before-prev is cached, add an asterisk. 709 if f_isset \ 710 _index_page_${varcat}_$(( $page - 1 )) 711 then 712 defaultitem="${defaultitem%\*}*" 713 else 714 defaultitem="${defaultitem%\*}" 715 fi 716 setvar _defaultitem_$varcat "$defaultitem" 717 continue ;; 718 "> $msg_next_page"|"> $msg_next_page*") 719 page=$(( $page + 1 )) 720 setvar _defaultpage_$varcat $page 721 # Update default-item to match accent that will 722 # be applied by f_package_menu_select(); if the 723 # page-after-next is cached, add an asterisk. 724 if f_isset \ 725 _index_page_${varcat}_$(( $page + 1 )) 726 then 727 defaultitem="${defaultitem%\*}*" 728 else 729 defaultitem="${defaultitem%\*}" 730 fi 731 setvar _defaultitem_$varcat "$defaultitem" 732 continue ;; 733 "> "*) # Unknown navigation/action item 734 setvar _defaultpage_$varcat $page 735 continue ;; # Do not treat as a package 736 *) 737 setvar _defaultitem_$varcat "$defaultitem" 738 esac 739 740 # Treat any other selection as a package 741 package="${menu_choice# }" # Trim leading space 742 f_str2varname $package varpkg 743 f_dialog_menuitem_fetch mark 744 mark="${mark#?}" 745 mark="${mark%%\] *}" 746 case "$mark" in 747 "I") 748 mark=" " 749 f_package_deselect $package 750 ;; 751 " "|"D") 752 mark="I" 753 f_package_select $package 754 ;; 755 "X"|"R"|"U") 756 f_package_menu_deselect $package || continue 757 f_dialog_menutag_fetch menu_choice 758 case "$menu_choice" in 759 "X $msg_installed") 760 f_package_deselect "$package" 761 mark="X" 762 ;; 763 "R $msg_reinstall") 764 f_package_select "$package" 765 mark="R" 766 ;; 767 "U $msg_uninstall") 768 f_package_select "$package" 769 mark="U" 770 ;; 771 esac 772 ;; 773 esac 774 export _mark_$varpkg="$mark" 775 # NOTE: exported for awk(1) ENVIRON[] 776 done 777 done 778} 779 780############################################################ MAIN 781 782f_dprintf "%s: Successfully loaded." packages/packages.subr 783 784fi # ! $_PACKAGES_PACKAGES_SUBR
| 653} 654 655# f_package_config 656# 657# Allow the user to configure packages and install them. Initially, a list of 658# package categories is loaded/displayed. When the user selects a category, 659# the menus for that category are built (unlike sysinstall which built all 660# category menus up-front -- which also took forever, despite the fact that 661# few people visit more than a couple of categories each time). 662# 663f_package_config() 664{ 665 # Did we get an INDEX? 666 f_index_initialize packages/INDEX || return $FAILURE 667 # Creates following variables (indirectly via f_index_read()) 668 # CATEGORY_MENU_LIST _categories_{varpkg} _rundeps_{varpkg} 669 # PACKAGE_CATEGORIES _npkgs 670 671 # Detect installed packages (updates marks/SELECTED_PACKAGES) 672 f_package_detect_installed 673 674 local retval category varcat defaultitem category_defaultitem="" 675 while :; do 676 # Display the list of package categories 677 f_package_menu_categories \ 678 CATEGORY_MENU_LIST "$category_defaultitem" 679 retval=$? 680 f_dialog_menutag_fetch category 681 f_dprintf "retval=%u mtag=[%s]" $retval "$category" 682 category_defaultitem="$category" 683 684 [ $retval -eq $SUCCESS ] || break 685 686 # Maybe the user chose an action (like `Review') 687 case "$category" in 688 "> $msg_review") 689 f_package_review && break 690 continue ;; 691 "> "*) 692 continue 693 esac 694 695 # Anything else is a package category 696 697 category=${category# } # Trim leading space if present 698 category=${category%\*} # Trim trailing asterisk if present 699 700 f_str2varname "$category" varcat 701 702 local page package varpkg mark menu_choice 703 while :; do 704 # Display the list of packages for selected category 705 page=1 defaultitem="" 706 f_getvar _defaultitem_$varcat defaultitem 707 f_getvar _defaultpage_$varcat page 708 f_package_menu_select \ 709 "$category" "${page:=1}" "$defaultitem" 710 retval=$? 711 f_dialog_menutag_fetch menu_choice 712 f_dprintf "retval=%u mtag=[%s]" $retval "$menu_choice" 713 714 # NOTE: When --and-widget is used only ESC will cause 715 # dialog(1) to return without going to the next widget. 716 # This is alright in our case as we can still detect 717 # the Cancel button because stdout will be NULL. 718 # Alternatively, Xdialog(1) will terminate with 1 719 # if/when Cancel is chosen on any widget. 720 if [ $retval -eq 255 -o ! "$menu_choice" ]; then 721 # User pressed ESC or chose Cancel 722 break 723 elif [ $retval -eq 1 ]; then 724 # Using X11, Xdialog(1) returned 1 for Cancel 725 f_show_msg "%s" "$menu_choice" 726 break 727 elif [ $retval -ne $SUCCESS ]; then 728 # X11-related error occurred using Xdialog(1) 729 f_show_msg "%s" "$menu_choice" 730 break 731 fi 732 733 defaultitem="$menu_choice" 734 735 # NOTE: f_package_menu_select() does not show the 736 # `Previous Page' or `Next Page' items unless needed 737 case "$menu_choice" in 738 "> $msg_previous_page"|"> $msg_previous_page*") 739 page=$(( $page - 1 )) 740 setvar _defaultpage_$varcat $page 741 # Update default-item to match accent that will 742 # be applied by f_package_menu_select(); if the 743 # page-before-prev is cached, add an asterisk. 744 if f_isset \ 745 _index_page_${varcat}_$(( $page - 1 )) 746 then 747 defaultitem="${defaultitem%\*}*" 748 else 749 defaultitem="${defaultitem%\*}" 750 fi 751 setvar _defaultitem_$varcat "$defaultitem" 752 continue ;; 753 "> $msg_next_page"|"> $msg_next_page*") 754 page=$(( $page + 1 )) 755 setvar _defaultpage_$varcat $page 756 # Update default-item to match accent that will 757 # be applied by f_package_menu_select(); if the 758 # page-after-next is cached, add an asterisk. 759 if f_isset \ 760 _index_page_${varcat}_$(( $page + 1 )) 761 then 762 defaultitem="${defaultitem%\*}*" 763 else 764 defaultitem="${defaultitem%\*}" 765 fi 766 setvar _defaultitem_$varcat "$defaultitem" 767 continue ;; 768 "> "*) # Unknown navigation/action item 769 setvar _defaultpage_$varcat $page 770 continue ;; # Do not treat as a package 771 *) 772 setvar _defaultitem_$varcat "$defaultitem" 773 esac 774 775 # Treat any other selection as a package 776 package="${menu_choice# }" # Trim leading space 777 f_str2varname $package varpkg 778 f_dialog_menuitem_fetch mark 779 mark="${mark#?}" 780 mark="${mark%%\] *}" 781 case "$mark" in 782 "I") 783 mark=" " 784 f_package_deselect $package 785 ;; 786 " "|"D") 787 mark="I" 788 f_package_select $package 789 ;; 790 "X"|"R"|"U") 791 f_package_menu_deselect $package || continue 792 f_dialog_menutag_fetch menu_choice 793 case "$menu_choice" in 794 "X $msg_installed") 795 f_package_deselect "$package" 796 mark="X" 797 ;; 798 "R $msg_reinstall") 799 f_package_select "$package" 800 mark="R" 801 ;; 802 "U $msg_uninstall") 803 f_package_select "$package" 804 mark="U" 805 ;; 806 esac 807 ;; 808 esac 809 export _mark_$varpkg="$mark" 810 # NOTE: exported for awk(1) ENVIRON[] 811 done 812 done 813} 814 815############################################################ MAIN 816 817f_dprintf "%s: Successfully loaded." packages/packages.subr 818 819fi # ! $_PACKAGES_PACKAGES_SUBR
|