clkbrdreg.h (143827) | clkbrdreg.h (157225) |
---|---|
1/*- 2 * Copyright (c) 2004 Jason L. Wright (jason@thought.net) | 1/*- 2 * Copyright (c) 2004 Jason L. Wright (jason@thought.net) |
3 * Copyright (c) 2006 Marius Strobl <marius@FreeBSD.org> |
|
3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright --- 9 unchanged lines hidden (view full) --- 20 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 22 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN 23 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 24 * POSSIBILITY OF SUCH DAMAGE. 25 * 26 * from: OpenBSD: clkbrdreg.h,v 1.2 2004/10/01 15:36:30 jason Exp 27 * | 4 * All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright --- 9 unchanged lines hidden (view full) --- 21 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 22 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 23 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN 24 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 25 * POSSIBILITY OF SUCH DAMAGE. 26 * 27 * from: OpenBSD: clkbrdreg.h,v 1.2 2004/10/01 15:36:30 jason Exp 28 * |
28 * $FreeBSD: head/sys/sparc64/fhc/clkbrdreg.h 143827 2005-03-19 01:04:48Z marius $ | 29 * $FreeBSD: head/sys/sparc64/fhc/clkbrdreg.h 157225 2006-03-28 19:46:48Z marius $ |
29 */ 30 | 30 */ 31 |
31#define CLK_CTRL 0x00 32#define CLK_STS1 0x10 33#define CLK_STS2 0x20 34#define CLK_PSTS1 0x30 35#define CLK_PPRES 0x40 36#define CLK_TEMP 0x50 37#define CLK_IRQ 0x60 38#define CLK_PSTS2 0x70 | 32#ifndef _SPARC64_FHC_CLKBRDREG_H_ 33#define _SPARC64_FHC_CLKBRDREG_H_ |
39 | 34 |
40#define CLK_CTRL_IEN_FAN 0x80 /* intr enable: fan failure */ 41#define CLK_CTRL_IEN_DC 0x40 /* intr enable: pwr supply DC */ 42#define CLK_CTRL_IEN_AC 0x20 /* intr enable: AC pwr supply */ 43#define CLK_CTRL_IEN_BRD 0x10 /* intr enable: board insert */ 44#define CLK_CTRL_POFF 0x08 /* turn off system power */ 45#define CLK_CTRL_LLED 0x04 /* left led (reversed) */ 46#define CLK_CTRL_MLED 0x02 /* middle led */ 47#define CLK_CTRL_RLED 0x01 /* right led */ | 35/* register bank 0 */ 36#define CLK_CF_REG2 0x20 /* clock frequency register 2 */ 37#define CLK_CF_REG2_REN_RCONS 0x80 /* reset enable: remote console */ 38#define CLK_CF_REG2_REN_GEN 0x40 /* reset enable: frequency change */ 39#define CLK_CF_REG2_REN_WDOG 0x20 /* reset enable: watchdog */ 40#define CLK_CF_REG2_DIV1 0x10 /* CPU module divisor bit 1 */ 41#define CLK_CF_REG2_RANGE 0x0c /* clock range */ 42#define CLK_CF_REG2_DIV0 0x02 /* CPU module divisor bit 0 */ 43#define CLK_CF_REG2_FREQ8 0x01 /* frequency bit 8 */ 44 45/* register bank 1 */ 46#define CLK_CTRL 0x00 /* system control register */ 47#define CLK_CTRL_IEN_FAN 0x80 /* intr enable: fan failure */ 48#define CLK_CTRL_IEN_DC 0x40 /* intr enable: power supply DC */ 49#define CLK_CTRL_IEN_AC 0x20 /* intr enable: AC power */ 50#define CLK_CTRL_IEN_BRD 0x10 /* intr enable: board insert */ 51#define CLK_CTRL_POFF 0x08 /* turn off system power */ 52#define CLK_CTRL_LLED 0x04 /* left led (reversed) */ 53#define CLK_CTRL_MLED 0x02 /* middle led */ 54#define CLK_CTRL_RLED 0x01 /* right led */ 55#define CLK_STS1 0x10 /* system status register 1 */ 56#define CLK_STS1_SLOTS_MASK 0xc0 /* system status 1 slots mask */ 57#define CLK_STS1_SLOTS_16 0x40 /* 16 slots */ 58#define CLK_STS1_SLOTS_8 0xc0 /* 8 slots */ 59#define CLK_STS1_SLOTS_4 0x80 /* 4 slots */ 60#define CLK_STS1_SLOTS_TESTBED 0x00 /* test machine */ 61#define CLK_STS1_SECURE 0x20 /* key in position secure (reversed) */ 62#define CLK_STS1_FAN 0x10 /* fan tray present (reversed) */ 63#define CLK_STS1_BRD 0x08 /* board inserted (reversed) */ 64#define CLK_STS1_PS0 0x04 /* power supply 0 present (reversed) */ 65#define CLK_STS1_RST_WDOG 0x02 /* rst by: watchdog (reversed) */ 66#define CLK_STS1_RST_GEN 0x01 /* rst by: freq change (reversed) */ 67#define CLK_STS2 0x20 /* system status register 2 */ 68#define CLK_STS2_RST_RCONS 0x80 /* rst by: remote console (reversed) */ 69#define CLK_STS2_OK_PS0 0x40 /* ok: power supply 0 */ 70#define CLK_STS2_OK_33V 0x20 /* ok: 3.3V on clock board */ 71#define CLK_STS2_OK_50V 0x10 /* ok: 5.0V on clock board */ 72#define CLK_STS2_FAIL_AC 0x08 /* failed: AC power */ 73#define CLK_STS2_FAIL_FAN 0x04 /* failed: rack fans */ 74#define CLK_STS2_OK_ACFAN 0x02 /* ok: 4 AC box fans */ 75#define CLK_STS2_OK_KEYFAN 0x01 /* ok: keyswitch fans */ 76#define CLK_PSTS1 0x30 /* power supply 1 status register */ 77#define CLK_PSTS1_PS 0x80 /* power supply 1 present (reversed) */ 78#define CLK_PPRES 0x40 /* power supply presence register */ 79#define CLK_PPRES_CSHARE 0x80 /* current share backplane */ 80#define CLK_PPRES_OK_MASK 0x7f /* precharge and peripheral pwr mask */ 81#define CLK_PPRES_OK_P_5V 0x40 /* ok: peripheral 5V */ 82#define CLK_PPRES_OK_P_12V 0x20 /* ok: peripheral 12V */ 83#define CLK_PPRES_OK_AUX_5V 0x10 /* ok: auxiliary 5V */ 84#define CLK_PPRES_OK_PP_5V 0x08 /* ok: peripheral 5V precharge */ 85#define CLK_PPRES_OK_PP_12V 0x04 /* ok: peripheral 12V precharge */ 86#define CLK_PPRES_OK_SP_3V 0x02 /* ok: system 3.3V precharge */ 87#define CLK_PPRES_OK_SP_5V 0x01 /* ok: system 5V precharge */ 88#define CLK_TEMP 0x50 /* temperature register */ 89#define CLK_IDIAG 0x60 /* interrupt diagnostic register */ 90#define CLK_PSTS2 0x70 /* power supply 2 status register */ 91 92/* register bank 2 */ 93#define CLKVER_SLOTS 0x00 /* clock version slots register */ 94#define CLKVER_SLOTS_MASK 0x80 /* clock version slots mask */ 95#define CLKVER_SLOTS_PLUS 0x00 /* plus system (reversed) */ 96 97#endif /* !_SPARC64_FHC_CLKBRDREG_H_ */ |