7c7
< # $FreeBSD: head/sys/pc98/conf/NOTES 159549 2006-06-12 20:38:17Z jhb $
---
> # $FreeBSD: head/sys/pc98/conf/NOTES 160813 2006-07-29 18:38:54Z marcel $
216a217,254
> #
> # sio: serial ports (see sio(4)), including support for various
> # PC Card devices, such as Modem and NICs (see etc/defaults/pccard.conf)
> #
> device sio
> hint.sio.0.at="isa"
> hint.sio.0.port="0x3F8"
> hint.sio.0.flags="0x10"
> hint.sio.0.irq="4"
>
> # `flags' specific to sio(4).
> # 0x10 enable console support for this unit. Other console flags
> # (if applicable) are ignored unless this is set. Enabling
> # console support does not make the unit the preferred console.
> # Boot with -h or set boot_serial=YES in the loader. For sio(4)
> # specifically, the 0x20 flag can also be set (see above).
> # Currently, at most one unit can have console support; the
> # first one (in config file order) with this flag set is
> # preferred. Setting this flag for sio0 gives the old behaviour.
> # 0x20 force this unit to be the console (unless there is another
> # higher priority console). This replaces the COMCONSOLE option.
> # 0x40 reserve this unit for low level console operations. Do not
> # access the device in any normal way.
> # 0x80 use this port for serial line gdb support in ddb. Also known
> # as debug port.
> # PnP `flags'
> # 0x1 disable probing of this device. Used to prevent your modem
> # from being attached as a PnP modem.
> # Other flags for sio that aren't documented in the man page.
> # 0x20000 enable hardware RTS/CTS and larger FIFOs. Only works for
> # ST16650A-compatible UARTs.
>
> # Options for sio:
> options COM_ESP # Code for Hayes ESP.
> options COM_MULTIPORT # Code for some cards with shared IRQs.
> options CONSPEED=115200 # Speed for serial console
> # (default 9600).
>
< # $FreeBSD: head/sys/pc98/conf/NOTES 159549 2006-06-12 20:38:17Z jhb $
---
> # $FreeBSD: head/sys/pc98/conf/NOTES 160813 2006-07-29 18:38:54Z marcel $
216a217,254
> #
> # sio: serial ports (see sio(4)), including support for various
> # PC Card devices, such as Modem and NICs (see etc/defaults/pccard.conf)
> #
> device sio
> hint.sio.0.at="isa"
> hint.sio.0.port="0x3F8"
> hint.sio.0.flags="0x10"
> hint.sio.0.irq="4"
>
> # `flags' specific to sio(4).
> # 0x10 enable console support for this unit. Other console flags
> # (if applicable) are ignored unless this is set. Enabling
> # console support does not make the unit the preferred console.
> # Boot with -h or set boot_serial=YES in the loader. For sio(4)
> # specifically, the 0x20 flag can also be set (see above).
> # Currently, at most one unit can have console support; the
> # first one (in config file order) with this flag set is
> # preferred. Setting this flag for sio0 gives the old behaviour.
> # 0x20 force this unit to be the console (unless there is another
> # higher priority console). This replaces the COMCONSOLE option.
> # 0x40 reserve this unit for low level console operations. Do not
> # access the device in any normal way.
> # 0x80 use this port for serial line gdb support in ddb. Also known
> # as debug port.
> # PnP `flags'
> # 0x1 disable probing of this device. Used to prevent your modem
> # from being attached as a PnP modem.
> # Other flags for sio that aren't documented in the man page.
> # 0x20000 enable hardware RTS/CTS and larger FIFOs. Only works for
> # ST16650A-compatible UARTs.
>
> # Options for sio:
> options COM_ESP # Code for Hayes ESP.
> options COM_MULTIPORT # Code for some cards with shared IRQs.
> options CONSPEED=115200 # Speed for serial console
> # (default 9600).
>