8# 9 10options PC98 11 12# 13# We want LINT to cover profiling as well. 14profile 2 15 16 17##################################################################### 18# SMP OPTIONS: 19# 20# The apic device enables the use of the I/O APIC for interrupt delivery. 21# The apic device can be used in both UP and SMP kernels, but is required 22# for SMP kernels. Thus, the apic device is not strictly an SMP option, 23# but it is a prerequisite for SMP. 24# 25 26# Mandatory: 27device apic # I/O apic 28 29# 30# Watchdog routines. 31# 32options MP_WATCHDOG 33 34# Debugging options. 35# 36options STOP_NMI # Stop CPUS using NMI instead of IPI 37 38 39 40##################################################################### 41# CPU OPTIONS 42 43# 44# You must specify at least one CPU (the one you intend to run on); 45# deleting the specification for CPUs you don't need to use may make 46# parts of the system run faster. 47# 48cpu I486_CPU 49cpu I586_CPU # aka Pentium(tm) 50cpu I686_CPU # aka Pentium Pro(tm) 51 52# 53# Options for CPU features. 54# 55# CPU_BLUELIGHTNING_3X enables triple-clock mode on IBM Blue Lightning 56# CPU if CPU supports it. The default is double-clock mode on 57# BlueLightning CPU box. 58# 59# CPU_BLUELIGHTNING_FPU_OP_CACHE enables FPU operand cache on IBM 60# BlueLightning CPU. It works only with Cyrix FPU, and this option 61# should not be used with Intel FPU. 62# 63# CPU_BTB_EN enables branch target buffer on Cyrix 5x86 (NOTE 1). 64# 65# CPU_CYRIX_NO_LOCK enables weak locking for the entire address space 66# of Cyrix 6x86 and 6x86MX CPUs by setting the NO_LOCK bit of CCR1. 67# Otherwise, the NO_LOCK bit of CCR1 is cleared. (NOTE 3) 68# 69# CPU_DIRECT_MAPPED_CACHE sets L1 cache of Cyrix 486DLC CPU in direct 70# mapped mode. Default is 2-way set associative mode. 71# 72# CPU_DISABLE_5X86_LSSER disables load store serialize (i.e., enables 73# reorder). This option should not be used if you use memory mapped 74# I/O device(s). 75# 76# CPU_DISABLE_CMPXCHG disables the CMPXCHG instruction on > i386 IA32 77# machines. VmWare 3.x seems to emulate this instruction poorly, causing 78# the guest OS to run very slowly. This problem appears to be fixed in 79# VmWare 4.x, at least in version 4.5.2, so that enabling this option with 80# VmWare 4.x will result in locking operations to be 20-30 times slower. 81# Enabling this with an SMP kernel will cause the kernel to be unusable. 82# 83# CPU_DISABLE_SSE explicitly prevents I686_CPU from turning on SSE. 84# 85# CPU_FASTER_5X86_FPU enables faster FPU exception handler. 86# 87# CPU_I486_ON_386 enables CPU cache on i486 based CPU upgrade products 88# for i386 machines. 89# 90# CPU_IORT defines I/O clock delay time (NOTE 1). Default values of 91# I/O clock delay time on Cyrix 5x86 and 6x86 are 0 and 7,respectively 92# (no clock delay). 93# 94# CPU_L2_LATENCY specifies the L2 cache latency value. This option is used 95# only when CPU_PPRO2CELERON is defined and Mendocino Celeron is detected. 96# The default value is 5. 97# 98# CPU_LOOP_EN prevents flushing the prefetch buffer if the destination 99# of a jump is already present in the prefetch buffer on Cyrix 5x86(NOTE 100# 1). 101# 102# CPU_PPRO2CELERON enables L2 cache of Mendocino Celeron CPUs. This option 103# is useful when you use Socket 8 to Socket 370 converter, because most Pentium 104# Pro BIOSs do not enable L2 cache of Mendocino Celeron CPUs. 105# 106# CPU_RSTK_EN enables return stack on Cyrix 5x86 (NOTE 1). 107# 108# CPU_SUSP_HLT enables suspend on HALT. If this option is set, CPU 109# enters suspend mode following execution of HALT instruction. 110# 111# CPU_UPGRADE_HW_CACHE eliminates unneeded cache flush instruction(s). 112# 113# CPU_WT_ALLOC enables write allocation on Cyrix 6x86/6x86MX and AMD 114# K5/K6/K6-2 CPUs. 115# 116# CYRIX_CACHE_WORKS enables CPU cache on Cyrix 486 CPUs with cache 117# flush at hold state. 118# 119# CYRIX_CACHE_REALLY_WORKS enables (1) CPU cache on Cyrix 486 CPUs 120# without cache flush at hold state, and (2) write-back CPU cache on 121# Cyrix 6x86 whose revision < 2.7 (NOTE 2). 122# 123# NO_F00F_HACK disables the hack that prevents Pentiums (and ONLY 124# Pentiums) from locking up when a LOCK CMPXCHG8B instruction is 125# executed. This option is only needed if I586_CPU is also defined, 126# and should be included for any non-Pentium CPU that defines it. 127# 128# NO_MEMORY_HOLE is an optimisation for systems with AMD K6 processors 129# which indicates that the 15-16MB range is *definitely* not being 130# occupied by an ISA memory hole. 131# 132# NOTE 1: The options, CPU_BTB_EN, CPU_LOOP_EN, CPU_IORT, 133# CPU_LOOP_EN and CPU_RSTK_EN should not be used because of CPU bugs. 134# These options may crash your system. 135# 136# NOTE 2: If CYRIX_CACHE_REALLY_WORKS is not set, CPU cache is enabled 137# in write-through mode when revision < 2.7. If revision of Cyrix 138# 6x86 >= 2.7, CPU cache is always enabled in write-back mode. 139# 140# NOTE 3: This option may cause failures for software that requires 141# locked cycles in order to operate correctly. 142# 143options CPU_BLUELIGHTNING_3X 144options CPU_BLUELIGHTNING_FPU_OP_CACHE 145options CPU_BTB_EN 146options CPU_DIRECT_MAPPED_CACHE 147options CPU_DISABLE_5X86_LSSER 148options CPU_DISABLE_CMPXCHG 149#options CPU_DISABLE_SSE 150options CPU_FASTER_5X86_FPU 151options CPU_I486_ON_386 152options CPU_IORT 153options CPU_L2_LATENCY=5 154options CPU_LOOP_EN 155options CPU_PPRO2CELERON 156options CPU_RSTK_EN 157options CPU_SUSP_HLT 158options CPU_UPGRADE_HW_CACHE 159options CPU_WT_ALLOC 160options CYRIX_CACHE_WORKS 161options CYRIX_CACHE_REALLY_WORKS 162#options NO_F00F_HACK 163 164# Debug options 165options NPX_DEBUG # enable npx debugging 166 167# 168# PERFMON causes the driver for Pentium/Pentium Pro performance counters 169# to be compiled. See perfmon(4) for more information. 170# 171options PERFMON 172 173 174##################################################################### 175# NETWORKING OPTIONS 176 177# 178# DEVICE_POLLING adds support for mixed interrupt-polling handling 179# of network device drivers, which has significant benefits in terms 180# of robustness to overloads and responsivity, as well as permitting 181# accurate scheduling of the CPU time between kernel network processing 182# and other activities. The drawback is a moderate (up to 1/HZ seconds) 183# potential increase in response times. 184# It is strongly recommended to use HZ=1000 or 2000 with DEVICE_POLLING 185# to achieve smoother behaviour. 186# Additionally, you can enable/disable polling at runtime with help of 187# the ifconfig(8) utility, and select the CPU fraction reserved to 188# userland with the sysctl variable kern.polling.user_frac 189# (default 50, range 0..100). 190# 191# Not all device drivers support this mode of operation at the time of 192# this writing. See polling(4) for more details. 193 194options DEVICE_POLLING 195 196 197##################################################################### 198# CLOCK OPTIONS 199 200# The following options are used for debugging clock behavior only, and 201# should not be used for production systems. 202 203# CLK_CALIBRATION_LOOP causes clock calibration to be run in a loop at 204# startup until the user presses a key. (The i8254 clock is always 205# calibrated relative to the RTC (mc146818a) and this option causes the 206# calibration to be repeated.) 207options CLK_CALIBRATION_LOOP 208 209# CLK_USE_I8254_CALIBRATION causes the calibrated frequency of the i8254 210# clock to actually be used. 211options CLK_USE_I8254_CALIBRATION 212 213 214##################################################################### 215# MISCELLANEOUS DEVICES AND OPTIONS 216 217# 218# sio: serial ports (see sio(4)), including support for various
| 8# 9 10options PC98 11 12# 13# We want LINT to cover profiling as well. 14profile 2 15 16 17##################################################################### 18# SMP OPTIONS: 19# 20# The apic device enables the use of the I/O APIC for interrupt delivery. 21# The apic device can be used in both UP and SMP kernels, but is required 22# for SMP kernels. Thus, the apic device is not strictly an SMP option, 23# but it is a prerequisite for SMP. 24# 25 26# Mandatory: 27device apic # I/O apic 28 29# 30# Watchdog routines. 31# 32options MP_WATCHDOG 33 34# Debugging options. 35# 36options STOP_NMI # Stop CPUS using NMI instead of IPI 37 38 39 40##################################################################### 41# CPU OPTIONS 42 43# 44# You must specify at least one CPU (the one you intend to run on); 45# deleting the specification for CPUs you don't need to use may make 46# parts of the system run faster. 47# 48cpu I486_CPU 49cpu I586_CPU # aka Pentium(tm) 50cpu I686_CPU # aka Pentium Pro(tm) 51 52# 53# Options for CPU features. 54# 55# CPU_BLUELIGHTNING_3X enables triple-clock mode on IBM Blue Lightning 56# CPU if CPU supports it. The default is double-clock mode on 57# BlueLightning CPU box. 58# 59# CPU_BLUELIGHTNING_FPU_OP_CACHE enables FPU operand cache on IBM 60# BlueLightning CPU. It works only with Cyrix FPU, and this option 61# should not be used with Intel FPU. 62# 63# CPU_BTB_EN enables branch target buffer on Cyrix 5x86 (NOTE 1). 64# 65# CPU_CYRIX_NO_LOCK enables weak locking for the entire address space 66# of Cyrix 6x86 and 6x86MX CPUs by setting the NO_LOCK bit of CCR1. 67# Otherwise, the NO_LOCK bit of CCR1 is cleared. (NOTE 3) 68# 69# CPU_DIRECT_MAPPED_CACHE sets L1 cache of Cyrix 486DLC CPU in direct 70# mapped mode. Default is 2-way set associative mode. 71# 72# CPU_DISABLE_5X86_LSSER disables load store serialize (i.e., enables 73# reorder). This option should not be used if you use memory mapped 74# I/O device(s). 75# 76# CPU_DISABLE_CMPXCHG disables the CMPXCHG instruction on > i386 IA32 77# machines. VmWare 3.x seems to emulate this instruction poorly, causing 78# the guest OS to run very slowly. This problem appears to be fixed in 79# VmWare 4.x, at least in version 4.5.2, so that enabling this option with 80# VmWare 4.x will result in locking operations to be 20-30 times slower. 81# Enabling this with an SMP kernel will cause the kernel to be unusable. 82# 83# CPU_DISABLE_SSE explicitly prevents I686_CPU from turning on SSE. 84# 85# CPU_FASTER_5X86_FPU enables faster FPU exception handler. 86# 87# CPU_I486_ON_386 enables CPU cache on i486 based CPU upgrade products 88# for i386 machines. 89# 90# CPU_IORT defines I/O clock delay time (NOTE 1). Default values of 91# I/O clock delay time on Cyrix 5x86 and 6x86 are 0 and 7,respectively 92# (no clock delay). 93# 94# CPU_L2_LATENCY specifies the L2 cache latency value. This option is used 95# only when CPU_PPRO2CELERON is defined and Mendocino Celeron is detected. 96# The default value is 5. 97# 98# CPU_LOOP_EN prevents flushing the prefetch buffer if the destination 99# of a jump is already present in the prefetch buffer on Cyrix 5x86(NOTE 100# 1). 101# 102# CPU_PPRO2CELERON enables L2 cache of Mendocino Celeron CPUs. This option 103# is useful when you use Socket 8 to Socket 370 converter, because most Pentium 104# Pro BIOSs do not enable L2 cache of Mendocino Celeron CPUs. 105# 106# CPU_RSTK_EN enables return stack on Cyrix 5x86 (NOTE 1). 107# 108# CPU_SUSP_HLT enables suspend on HALT. If this option is set, CPU 109# enters suspend mode following execution of HALT instruction. 110# 111# CPU_UPGRADE_HW_CACHE eliminates unneeded cache flush instruction(s). 112# 113# CPU_WT_ALLOC enables write allocation on Cyrix 6x86/6x86MX and AMD 114# K5/K6/K6-2 CPUs. 115# 116# CYRIX_CACHE_WORKS enables CPU cache on Cyrix 486 CPUs with cache 117# flush at hold state. 118# 119# CYRIX_CACHE_REALLY_WORKS enables (1) CPU cache on Cyrix 486 CPUs 120# without cache flush at hold state, and (2) write-back CPU cache on 121# Cyrix 6x86 whose revision < 2.7 (NOTE 2). 122# 123# NO_F00F_HACK disables the hack that prevents Pentiums (and ONLY 124# Pentiums) from locking up when a LOCK CMPXCHG8B instruction is 125# executed. This option is only needed if I586_CPU is also defined, 126# and should be included for any non-Pentium CPU that defines it. 127# 128# NO_MEMORY_HOLE is an optimisation for systems with AMD K6 processors 129# which indicates that the 15-16MB range is *definitely* not being 130# occupied by an ISA memory hole. 131# 132# NOTE 1: The options, CPU_BTB_EN, CPU_LOOP_EN, CPU_IORT, 133# CPU_LOOP_EN and CPU_RSTK_EN should not be used because of CPU bugs. 134# These options may crash your system. 135# 136# NOTE 2: If CYRIX_CACHE_REALLY_WORKS is not set, CPU cache is enabled 137# in write-through mode when revision < 2.7. If revision of Cyrix 138# 6x86 >= 2.7, CPU cache is always enabled in write-back mode. 139# 140# NOTE 3: This option may cause failures for software that requires 141# locked cycles in order to operate correctly. 142# 143options CPU_BLUELIGHTNING_3X 144options CPU_BLUELIGHTNING_FPU_OP_CACHE 145options CPU_BTB_EN 146options CPU_DIRECT_MAPPED_CACHE 147options CPU_DISABLE_5X86_LSSER 148options CPU_DISABLE_CMPXCHG 149#options CPU_DISABLE_SSE 150options CPU_FASTER_5X86_FPU 151options CPU_I486_ON_386 152options CPU_IORT 153options CPU_L2_LATENCY=5 154options CPU_LOOP_EN 155options CPU_PPRO2CELERON 156options CPU_RSTK_EN 157options CPU_SUSP_HLT 158options CPU_UPGRADE_HW_CACHE 159options CPU_WT_ALLOC 160options CYRIX_CACHE_WORKS 161options CYRIX_CACHE_REALLY_WORKS 162#options NO_F00F_HACK 163 164# Debug options 165options NPX_DEBUG # enable npx debugging 166 167# 168# PERFMON causes the driver for Pentium/Pentium Pro performance counters 169# to be compiled. See perfmon(4) for more information. 170# 171options PERFMON 172 173 174##################################################################### 175# NETWORKING OPTIONS 176 177# 178# DEVICE_POLLING adds support for mixed interrupt-polling handling 179# of network device drivers, which has significant benefits in terms 180# of robustness to overloads and responsivity, as well as permitting 181# accurate scheduling of the CPU time between kernel network processing 182# and other activities. The drawback is a moderate (up to 1/HZ seconds) 183# potential increase in response times. 184# It is strongly recommended to use HZ=1000 or 2000 with DEVICE_POLLING 185# to achieve smoother behaviour. 186# Additionally, you can enable/disable polling at runtime with help of 187# the ifconfig(8) utility, and select the CPU fraction reserved to 188# userland with the sysctl variable kern.polling.user_frac 189# (default 50, range 0..100). 190# 191# Not all device drivers support this mode of operation at the time of 192# this writing. See polling(4) for more details. 193 194options DEVICE_POLLING 195 196 197##################################################################### 198# CLOCK OPTIONS 199 200# The following options are used for debugging clock behavior only, and 201# should not be used for production systems. 202 203# CLK_CALIBRATION_LOOP causes clock calibration to be run in a loop at 204# startup until the user presses a key. (The i8254 clock is always 205# calibrated relative to the RTC (mc146818a) and this option causes the 206# calibration to be repeated.) 207options CLK_CALIBRATION_LOOP 208 209# CLK_USE_I8254_CALIBRATION causes the calibrated frequency of the i8254 210# clock to actually be used. 211options CLK_USE_I8254_CALIBRATION 212 213 214##################################################################### 215# MISCELLANEOUS DEVICES AND OPTIONS 216 217# 218# sio: serial ports (see sio(4)), including support for various
|
220# 221device sio 222hint.sio.0.at="isa" 223hint.sio.0.port="0x3F8" 224hint.sio.0.flags="0x10" 225hint.sio.0.irq="4" 226 227# `flags' specific to sio(4). 228# 0x10 enable console support for this unit. Other console flags 229# (if applicable) are ignored unless this is set. Enabling 230# console support does not make the unit the preferred console. 231# Boot with -h or set boot_serial=YES in the loader. For sio(4) 232# specifically, the 0x20 flag can also be set (see above). 233# Currently, at most one unit can have console support; the 234# first one (in config file order) with this flag set is 235# preferred. Setting this flag for sio0 gives the old behaviour. 236# 0x20 force this unit to be the console (unless there is another 237# higher priority console). This replaces the COMCONSOLE option. 238# 0x40 reserve this unit for low level console operations. Do not 239# access the device in any normal way. 240# 0x80 use this port for serial line gdb support in ddb. Also known 241# as debug port. 242# PnP `flags' 243# 0x1 disable probing of this device. Used to prevent your modem 244# from being attached as a PnP modem. 245# Other flags for sio that aren't documented in the man page. 246# 0x20000 enable hardware RTS/CTS and larger FIFOs. Only works for 247# ST16650A-compatible UARTs. 248 249# Options for sio: 250options COM_ESP # Code for Hayes ESP. 251options COM_MULTIPORT # Code for some cards with shared IRQs. 252options CONSPEED=115200 # Speed for serial console 253 # (default 9600). 254 255device speaker #Play IBM BASIC-style noises out your speaker 256hint.speaker.0.at="isa" 257hint.speaker.0.port="0x35" 258device gzip #Exec gzipped a.out's. REQUIRES COMPAT_AOUT! 259device apm_saver # Requires APM 260 261 262##################################################################### 263# HARDWARE BUS CONFIGURATION 264 265# 266# ISA bus 267# 268device isa 269 270# 271# Options for `isa': 272# 273# AUTO_EOI_1 enables the `automatic EOI' feature for the master 8259A 274# interrupt controller. This saves about 0.7-1.25 usec for each interrupt. 275# This option breaks suspend/resume on some portables. 276# 277# MAXMEM specifies the amount of RAM on the machine; if this is not 278# specified, FreeBSD will first read the amount of memory from the CMOS 279# RAM, so the amount of memory will initially be limited to 64MB or 16MB 280# depending on the BIOS. If the BIOS reports 64MB, a memory probe will 281# then attempt to detect the installed amount of RAM. If this probe 282# fails to detect >64MB RAM you will have to use the MAXMEM option. 283# The amount is in kilobytes, so for a machine with 128MB of RAM, it would 284# be 131072 (128 * 1024). 285# 286# BROKEN_KEYBOARD_RESET disables the use of the keyboard controller to 287# reset the CPU for reboot. This is needed on some systems with broken 288# keyboard controllers. 289 290options AUTO_EOI_1 291 292options MAXMEM=(128*1024) 293#options BROKEN_KEYBOARD_RESET 294options EPSON_BOUNCEDMA 295options EPSON_MEMWIN 296 297# 298# PCI bus & PCI options: 299# 300device pci 301 302# 303# AGP GART support 304device agp 305 306 307##################################################################### 308# HARDWARE DEVICE CONFIGURATION 309 310# PC98 keyboard 311device pckbd 312hint.pckbd.0.at="isa" 313hint.pckbd.0.port="0x041" 314hint.pckbd.0.irq="1" 315 316# These options are valid for other keyboard drivers as well. 317options KBD_DISABLE_KEYMAP_LOAD # refuse to load a keymap 318options KBD_INSTALL_CDEV # install a CDEV entry in /dev 319 320# GDC screen 321device gdc 322hint.gdc.0.at="isa" 323options LINE30 324 325# 326# The Numeric Processing eXtension driver. This is non-optional. 327device npx 328 329# 330# `flags' for npx0: 331# 0x01 don't use the npx registers to optimize bcopy. 332# 0x02 don't use the npx registers to optimize bzero. 333# 0x04 don't use the npx registers to optimize copyin or copyout. 334# The npx registers are normally used to optimize copying and zeroing when 335# all of the following conditions are satisfied: 336# I586_CPU is an option 337# the cpu is an i586 (perhaps not a Pentium) 338# the probe for npx0 succeeds 339# INT 16 exception handling works. 340# Then copying and zeroing using the npx registers is normally 30-100% faster. 341# The flags can be used to control cases where it doesn't work or is slower. 342# Setting them at boot time using hints works right (the optimizations 343# are not used until later in the bootstrap when npx0 is attached). 344# Flag 0x08 automatically disables the i586 optimized routines. 345# 346 347# 348# Optional devices: 349# 350 351# 3Dfx Voodoo Graphics, Voodoo II /dev/3dfx CDEV support. This will create 352# the /dev/3dfx0 device to work with glide implementations. This should get 353# linked to /dev/3dfx and /dev/voodoo. Note that this is not the same as 354# the tdfx DRI module from XFree86 and is completely unrelated. 355# 356# To enable Linuxulator support, one must also include COMPAT_LINUX in the 357# config as well. The other option is to load both as modules. 358 359device tdfx # Enable 3Dfx Voodoo support 360device tdfx_linux # Enable Linuxulator support 361 362# Direct Rendering modules for 3D acceleration. 363device drm # DRM core module required by DRM drivers 364device mach64drm # ATI Rage Pro, Rage Mobility P/M, Rage XL 365device mgadrm # AGP Matrox G200, G400, G450, G550 366device r128drm # ATI Rage 128 367device radeondrm # ATI Radeon 368device savagedrm # S3 Savage3D, Savage4 369device sisdrm # SiS 300/305, 540, 630 370device tdfxdrm # 3dfx Voodoo 3/4/5 and Banshee 371options DRM_DEBUG # Include debug printfs (slow) 372 373# 374# Bus mouse 375# 376device mse 377hint.mse.0.at="isa" 378hint.mse.0.port="0x7fd9" 379hint.mse.0.irq="13" 380 381# 382# Network interfaces: 383# 384 385# ar: Arnet SYNC/570i hdlc sync 2/4 port V.35/X.21 serial driver 386# (requires sppp) 387# ath: Atheros a/b/g WiFi adapters (requires ath_hal and wlan) 388# ce: Cronyx Tau-PCI/32 sync single/dual port G.703/E1 serial adaptor 389# with 32 HDLC subchannels (requires sppp (default), or NETGRAPH if 390# NETGRAPH_CRONYX is configured) 391# cp: Cronyx Tau-PCI sync single/dual/four port 392# V.35/RS-232/RS-530/RS-449/X.21/G.703/E1/E3/T3/STS-1 393# serial adaptor (requires sppp (default), or NETGRAPH if 394# NETGRAPH_CRONYX is configured) 395# cs: IBM Etherjet and other Crystal Semi CS89x0-based adapters and pccard 396# ed: Western Digital and SMC 80xx; Novell NE1000 and NE2000; 3Com 3C503 397# HP PC Lan+, various PC Card devices 398# (requires miibus) 399# ie: AT&T StarLAN 10 and EN100; 3Com 3C507; unknown NI5210; 400# Intel EtherExpress 401# oltr: Olicom ISA token-ring adapters OC-3115, OC-3117, OC-3118 and OC-3133. 402# Olicom PCI token-ring adapters OC-3136, OC-3137, OC-3139, OC-3140, 403# OC-3141, OC-3540 and OC-3250. 404# ral: Ralink Technology IEEE 802.11 wireless adapter 405# sbni: Granch SBNI12-xx ISA and PCI adapters 406# sr: RISCom/N2 hdlc sync 1/2 port V.35/X.21 serial driver (requires sppp) 407# ural: Ralink Technology RT2500USB IEEE 802.11 wireless adapter 408 409# Order for ISA/EISA devices is important here 410 411device ar 412device ce 413device cp 414device cs 415device ed 416hint.ed.0.at="isa" 417hint.ed.0.port="0x280" 418hint.ed.0.irq="5" 419hint.ed.0.maddr="0xd8000" 420device ie # Hints only required for Starlan 421hint.ie.2.at="isa" 422hint.ie.2.port="0x300" 423hint.ie.2.irq="5" 424hint.ie.2.maddr="0xd0000" 425# Hint for the PC98-only C-NET(98)S C-bus front-end of le(4). 426hint.le.0.at="isa" 427hint.le.0.port="0x03d0" 428hint.le.0.irq="6" 429device oltr 430device ral 431device sbni 432hint.sbni.0.at="isa" 433hint.sbni.0.port="0x210" 434hint.sbni.0.irq="0xefdead" 435hint.sbni.0.flags="0" 436device snc 437hint.snc.0.at="isa" 438hint.snc.0.port="0x888" 439hint.snc.0.irq="6" 440hint.snc.0.maddr="0xc0000" 441device sr 442device ural 443 444device ath 445device ath_hal # Atheros HAL (includes binary component) 446#device ath_rate_amrr # AMRR rate control for ath driver 447#device ath_rate_onoe # Onoe rate control for ath driver 448device ath_rate_sample # SampleRate rate control for the ath driver 449#device wlan # 802.11 layer 450 451# 452# SCSI host adapters: 453# 454# ct: WD33C93[ABC] based SCSI host adapters. 455# ncv: NCR 53C500 based SCSI host adapters. 456# nsp: Workbit Ninja SCSI-3 based PC Card SCSI host adapters. 457# stg: TMC 18C30, 18C50 based SCSI host adapters. 458 459device ct 460hint.ct.0.at="isa" 461device ncv 462device nsp 463device stg 464 465# 466# SafeNet crypto driver: can be moved to the MI NOTES as soon as 467# it's tested on a big-endian machine 468# 469device safe # SafeNet 1141 470options SAFE_DEBUG # enable debugging support: hw.safe.debug 471options SAFE_RNDTEST # enable rndtest support 472 473##################################################################### 474 475# 476# Miscellaneous hardware: 477# 478# apm: Laptop Advanced Power Management (experimental) 479# pmtimer: Timer device driver for power management events (APM or ACPI) 480# cy: Cyclades serial driver 481# digi: Digiboard driver 482 483# Notes on APM 484# The flags takes the following meaning for apm0: 485# 0x0020 Statclock is broken. 486 487device apm 488hint.apm.0.flags="0x20" 489device canbus 490device canbepm 491device cy 492options CY_PCI_FASTINTR # Use with cy_pci unless irq is shared 493device digi 494# BIOS & FEP/OS components of device digi. 495device digi_CX 496device digi_CX_PCI 497device digi_EPCX 498device digi_EPCX_PCI 499device digi_Xe 500device digi_Xem 501device digi_Xr 502device olpt 503hint.olpt.0.at="isa" 504hint.olpt.0.port="0x040" 505device pmc 506hint.pmc.0.at="isa" 507hint.pmc.0.port="0x8f0" 508device pmtimer # Adjust system timer at wakeup time 509 510# 511# Laptop/Notebook options: 512# 513# See also: 514# apm under `Miscellaneous hardware' 515# above. 516 517# For older notebooks that signal a powerfail condition (external 518# power supply dropped, or battery state low) by issuing an NMI: 519 520options POWERFAIL_NMI # make it beep instead of panicing 521 522#--------------------------------------------------------------------------- 523# ISDN4BSD 524# 525# See /usr/share/examples/isdn/ROADMAP for an introduction to isdn4bsd. 526# 527# i4b passive ISDN cards support contains the following hardware drivers: 528# 529# isic - Siemens/Infineon ISDN ISAC/HSCX/IPAC chipset driver 530# iwic - Winbond W6692 PCI bus ISDN S/T interface controller 531# ifpi - AVM Fritz!Card PCI driver 532# ifpi2 - AVM Fritz!Card PCI version 2 driver 533# ihfc - Cologne Chip HFC ISA/ISA-PnP chipset driver 534# ifpnp - AVM Fritz!Card PnP driver 535# itjc - Siemens ISAC / TJNet Tiger300/320 chipset 536# 537# i4b active ISDN cards support contains the following hardware drivers: 538# 539# iavc - AVM B1 PCI, AVM B1 ISA, AVM T1 540# 541# Note that the ``options'' (if given) and ``device'' lines must BOTH 542# be uncommented to enable support for a given card ! 543# 544# In addition to a hardware driver (and probably an option) the mandatory 545# ISDN protocol stack devices and the mandatory support device must be 546# enabled as well as one or more devices from the optional devices section. 547# 548#--------------------------------------------------------------------------- 549# isic driver (Siemens/Infineon chipsets) 550# 551device isic 552# 553# PCI bus Cards: 554# -------------- 555# 556# ELSA MicroLink ISDN/PCI (same as ELSA QuickStep 1000pro PCI) 557options ELSA_QS1PCI 558# 559#--------------------------------------------------------------------------- 560# ifpnp driver for AVM Fritz!Card PnP 561# 562# AVM Fritz!Card PnP 563device ifpnp 564# 565#--------------------------------------------------------------------------- 566# ihfc driver for Cologne Chip ISA chipsets (experimental!) 567# 568# Teles 16.3c ISA PnP 569# AcerISDN P10 ISA PnP 570# TELEINT ISDN SPEED No.1 571device ihfc 572# 573#--------------------------------------------------------------------------- 574# ifpi driver for AVM Fritz!Card PCI 575# 576# AVM Fritz!Card PCI 577device ifpi 578# 579#--------------------------------------------------------------------------- 580# ifpi2 driver for AVM Fritz!Card PCI version 2 581# 582# AVM Fritz!Card PCI version 2 583device ifpi2 584# 585#--------------------------------------------------------------------------- 586# iwic driver for Winbond W6692 chipset 587# 588# ASUSCOM P-IN100-ST-D (and other Winbond W6692 based cards) 589device iwic 590# 591#--------------------------------------------------------------------------- 592# itjc driver for Siemens ISAC / TJNet Tiger300/320 chipset 593# 594# Traverse Technologies NETjet-S 595# Teles PCI-TJ 596device itjc 597# 598#--------------------------------------------------------------------------- 599# iavc driver (AVM active cards, needs i4bcapi driver!) 600# 601device iavc 602# 603#--------------------------------------------------------------------------- 604# ISDN Protocol Stack - mandatory for all hardware drivers 605# 606# Q.921 / layer 2 - i4b passive cards D channel handling 607device i4bq921 608# 609# Q.931 / layer 3 - i4b passive cards D channel handling 610device i4bq931 611# 612# layer 4 - i4b common passive and active card handling 613device i4b 614# 615#--------------------------------------------------------------------------- 616# ISDN devices - mandatory for all hardware drivers 617# 618# userland driver to do ISDN tracing (for passive cards only) 619device i4btrc 620options NI4BTRC=4 621# 622# userland driver to control the whole thing 623device i4bctl 624# 625#--------------------------------------------------------------------------- 626# ISDN devices - optional 627# 628# userland driver for access to raw B channel 629device i4brbch 630options NI4BRBCH=4 631# 632# userland driver for telephony 633device i4btel 634options NI4BTEL=2 635# 636# network driver for IP over raw HDLC ISDN 637device i4bipr 638options NI4BIPR=4 639# enable VJ header compression detection for ipr i/f 640options IPR_VJ 641# enable logging of the first n IP packets to isdnd (n=32 here) 642options IPR_LOG=32 643# 644# network driver for sync PPP over ISDN; requires an equivalent 645# number of sppp device to be configured 646device i4bisppp 647options NI4BISPPP=4 648# 649# B-channel interface to the netgraph subsystem 650device i4bing 651options NI4BING=2 652# 653# CAPI driver needed for active ISDN cards (see iavc driver above) 654device i4bcapi 655# 656#--------------------------------------------------------------------------- 657 658# 659# Set the number of PV entries per process. Increasing this can 660# stop panics related to heavy use of shared memory. However, that can 661# (combined with large amounts of physical memory) cause panics at 662# boot time due the kernel running out of VM space. 663# 664# If you're tweaking this, you might also want to increase the sysctls 665# "vm.v_free_min", "vm.v_free_reserved", and "vm.v_free_target". 666# 667# The value below is the one more than the default. 668# 669options PMAP_SHPGPERPROC=201 670 671# 672# Change the size of the kernel virtual address space. Due to 673# constraints in loader(8) on i386, this must be a multiple of 4. 674# 256 = 1 GB of kernel address space. Increasing this also causes 675# a reduction of the address space in user processes. 512 splits 676# the 4GB cpu address space in half (2GB user, 2GB kernel). 677# 678options KVA_PAGES=260 679 680 681##################################################################### 682# ABI Emulation 683 684# Enable iBCS2 runtime support for SCO and ISC binaries 685options IBCS2 686 687# Emulate spx device for client side of SVR3 local X interface 688options SPX_HACK 689 690# Enable Linux ABI emulation 691options COMPAT_LINUX 692 693# Enable i386 a.out binary support 694options COMPAT_AOUT 695 696# Enable the linux-like proc filesystem support (requires COMPAT_LINUX 697# and PSEUDOFS) 698options LINPROCFS 699 700# Enable the linux-like sys filesystem support (requires COMPAT_LINUX 701# and PSEUDOFS) 702options LINSYSFS 703 704# 705# SysVR4 ABI emulation 706# 707# The svr4 ABI emulator can be statically compiled into the kernel or loaded as 708# a KLD module. 709# The STREAMS network emulation code can also be compiled statically or as a 710# module. If loaded as a module, it must be loaded before the svr4 module 711# (the /usr/sbin/svr4 script does this for you). If compiling statically, 712# the `streams' device must be configured into any kernel which also 713# specifies COMPAT_SVR4. It is possible to have a statically-configured 714# STREAMS device and a dynamically loadable svr4 emulator; the /usr/sbin/svr4 715# script understands that it doesn't need to load the `streams' module under 716# those circumstances. 717# Caveat: At this time, `options KTRACE' is required for the svr4 emulator 718# (whether static or dynamic). 719# 720options COMPAT_SVR4 # build emulator statically 721options DEBUG_SVR4 # enable verbose debugging 722device streams # STREAMS network driver (required for svr4). 723 724 725##################################################################### 726# VM OPTIONS 727 728# Disable the 4 MByte page PSE CPU feature. The PSE feature allows the 729# kernel to use 4 MByte pages to map the kernel instead of 4k pages. 730# This saves on the amount of memory needed for page tables needed to 731# map the kernel. You should only disable this feature as a temporary 732# workaround if you are having problems with it enabled. 733# 734#options DISABLE_PSE 735 736# Disable the global pages PGE CPU feature. The PGE feature allows pages 737# to be marked with the PG_G bit. TLB entries for these pages are not 738# flushed from the cache when %cr3 is reloaded. This can make context 739# switches less expensive. You should only disable this feature as a 740# temporary workaround if you are having problems with it enabled. 741# 742#options DISABLE_PG_G 743 744# KSTACK_PAGES is the number of memory pages to assign to the kernel 745# stack of each thread. 746 747options KSTACK_PAGES=3 748 749##################################################################### 750 751# More undocumented options for linting. 752# Note that documenting these are not considered an affront. 753 754options FB_INSTALL_CDEV # install a CDEV entry in /dev 755 756# PECOFF module (Win32 Execution Format) 757options PECOFF_SUPPORT 758options PECOFF_DEBUG 759 760options I4B_SMP_WORKAROUND 761options I586_PMC_GUPROF=0x70000 762options KBDIO_DEBUG=2 763options KBD_MAXRETRY=4 764options KBD_MAXWAIT=6 765options KBD_RESETDELAY=201 766 767options TIMER_FREQ=((14318182+6)/12) 768 769options VM_KMEM_SIZE 770options VM_KMEM_SIZE_MAX 771options VM_KMEM_SIZE_SCALE 772 773 774# The I/O device 775device io 776 777 778##################################################################### 779# Devices we don't want to deal with 780 781nodevice atkbdc 782nodevice atkbd 783nodevice psm 784nodevice vga 785nodevice bt 786nodevice adw 787nodevice aha 788nodevice ahb 789nodevice ahd 790nodevice mpt 791nodevice trm 792nodevice wds 793nodevice dpt 794nodevice ciss 795nodevice iir 796nodevice mly 797nodevice ida # Compaq Smart RAID 798nodevice mlx # Mylex DAC960 799nodevice amr # AMI MegaRAID 800nodevice twe # 3ware ATA RAID 801nodevice ataraid 802nodevice cm 803nodevice ex 804nodevice fea 805nodevice intpm 806nodevice alpm 807nodevice ichsmb 808nodevice viapm 809nodevice amdpm 810nodevice amdsmb 811nodevice nfpm 812nodevice nfsmb 813 814 815##################################################################### 816# Options we don't want to deal with 817 818nooption VGA_DEBUG 819nooption VGA_WIDTH90 820nooption VGA_SLOW_IOACCESS 821nooption VGA_ALT_SEQACCESS 822nooption PSM_RESETAFTERSUSPEND 823nooption PSM_HOOKRESUME 824nooption ATKBD_DFLT_KEYMAP 825nooption AHD_DEBUG 826nooption AHD_DEBUG_OPTS 827nooption AHD_REG_PRETTY_PRINT 828nooption ADW_ALLOW_MEMIO 829nooption DPT_LOST_IRQ 830nooption DPT_RESET_HBA 831nooption DPT_TIMEOUT_FACTOR 832nooption AAC_DEBUG 833nooption ACPI_MAX_THREADS 834 835 836##################################################################### 837# Make options we don't want to deal with 838 839nomakeoption ATKBD_DFLT_KEYMAP
| 220# 221device sio 222hint.sio.0.at="isa" 223hint.sio.0.port="0x3F8" 224hint.sio.0.flags="0x10" 225hint.sio.0.irq="4" 226 227# `flags' specific to sio(4). 228# 0x10 enable console support for this unit. Other console flags 229# (if applicable) are ignored unless this is set. Enabling 230# console support does not make the unit the preferred console. 231# Boot with -h or set boot_serial=YES in the loader. For sio(4) 232# specifically, the 0x20 flag can also be set (see above). 233# Currently, at most one unit can have console support; the 234# first one (in config file order) with this flag set is 235# preferred. Setting this flag for sio0 gives the old behaviour. 236# 0x20 force this unit to be the console (unless there is another 237# higher priority console). This replaces the COMCONSOLE option. 238# 0x40 reserve this unit for low level console operations. Do not 239# access the device in any normal way. 240# 0x80 use this port for serial line gdb support in ddb. Also known 241# as debug port. 242# PnP `flags' 243# 0x1 disable probing of this device. Used to prevent your modem 244# from being attached as a PnP modem. 245# Other flags for sio that aren't documented in the man page. 246# 0x20000 enable hardware RTS/CTS and larger FIFOs. Only works for 247# ST16650A-compatible UARTs. 248 249# Options for sio: 250options COM_ESP # Code for Hayes ESP. 251options COM_MULTIPORT # Code for some cards with shared IRQs. 252options CONSPEED=115200 # Speed for serial console 253 # (default 9600). 254 255device speaker #Play IBM BASIC-style noises out your speaker 256hint.speaker.0.at="isa" 257hint.speaker.0.port="0x35" 258device gzip #Exec gzipped a.out's. REQUIRES COMPAT_AOUT! 259device apm_saver # Requires APM 260 261 262##################################################################### 263# HARDWARE BUS CONFIGURATION 264 265# 266# ISA bus 267# 268device isa 269 270# 271# Options for `isa': 272# 273# AUTO_EOI_1 enables the `automatic EOI' feature for the master 8259A 274# interrupt controller. This saves about 0.7-1.25 usec for each interrupt. 275# This option breaks suspend/resume on some portables. 276# 277# MAXMEM specifies the amount of RAM on the machine; if this is not 278# specified, FreeBSD will first read the amount of memory from the CMOS 279# RAM, so the amount of memory will initially be limited to 64MB or 16MB 280# depending on the BIOS. If the BIOS reports 64MB, a memory probe will 281# then attempt to detect the installed amount of RAM. If this probe 282# fails to detect >64MB RAM you will have to use the MAXMEM option. 283# The amount is in kilobytes, so for a machine with 128MB of RAM, it would 284# be 131072 (128 * 1024). 285# 286# BROKEN_KEYBOARD_RESET disables the use of the keyboard controller to 287# reset the CPU for reboot. This is needed on some systems with broken 288# keyboard controllers. 289 290options AUTO_EOI_1 291 292options MAXMEM=(128*1024) 293#options BROKEN_KEYBOARD_RESET 294options EPSON_BOUNCEDMA 295options EPSON_MEMWIN 296 297# 298# PCI bus & PCI options: 299# 300device pci 301 302# 303# AGP GART support 304device agp 305 306 307##################################################################### 308# HARDWARE DEVICE CONFIGURATION 309 310# PC98 keyboard 311device pckbd 312hint.pckbd.0.at="isa" 313hint.pckbd.0.port="0x041" 314hint.pckbd.0.irq="1" 315 316# These options are valid for other keyboard drivers as well. 317options KBD_DISABLE_KEYMAP_LOAD # refuse to load a keymap 318options KBD_INSTALL_CDEV # install a CDEV entry in /dev 319 320# GDC screen 321device gdc 322hint.gdc.0.at="isa" 323options LINE30 324 325# 326# The Numeric Processing eXtension driver. This is non-optional. 327device npx 328 329# 330# `flags' for npx0: 331# 0x01 don't use the npx registers to optimize bcopy. 332# 0x02 don't use the npx registers to optimize bzero. 333# 0x04 don't use the npx registers to optimize copyin or copyout. 334# The npx registers are normally used to optimize copying and zeroing when 335# all of the following conditions are satisfied: 336# I586_CPU is an option 337# the cpu is an i586 (perhaps not a Pentium) 338# the probe for npx0 succeeds 339# INT 16 exception handling works. 340# Then copying and zeroing using the npx registers is normally 30-100% faster. 341# The flags can be used to control cases where it doesn't work or is slower. 342# Setting them at boot time using hints works right (the optimizations 343# are not used until later in the bootstrap when npx0 is attached). 344# Flag 0x08 automatically disables the i586 optimized routines. 345# 346 347# 348# Optional devices: 349# 350 351# 3Dfx Voodoo Graphics, Voodoo II /dev/3dfx CDEV support. This will create 352# the /dev/3dfx0 device to work with glide implementations. This should get 353# linked to /dev/3dfx and /dev/voodoo. Note that this is not the same as 354# the tdfx DRI module from XFree86 and is completely unrelated. 355# 356# To enable Linuxulator support, one must also include COMPAT_LINUX in the 357# config as well. The other option is to load both as modules. 358 359device tdfx # Enable 3Dfx Voodoo support 360device tdfx_linux # Enable Linuxulator support 361 362# Direct Rendering modules for 3D acceleration. 363device drm # DRM core module required by DRM drivers 364device mach64drm # ATI Rage Pro, Rage Mobility P/M, Rage XL 365device mgadrm # AGP Matrox G200, G400, G450, G550 366device r128drm # ATI Rage 128 367device radeondrm # ATI Radeon 368device savagedrm # S3 Savage3D, Savage4 369device sisdrm # SiS 300/305, 540, 630 370device tdfxdrm # 3dfx Voodoo 3/4/5 and Banshee 371options DRM_DEBUG # Include debug printfs (slow) 372 373# 374# Bus mouse 375# 376device mse 377hint.mse.0.at="isa" 378hint.mse.0.port="0x7fd9" 379hint.mse.0.irq="13" 380 381# 382# Network interfaces: 383# 384 385# ar: Arnet SYNC/570i hdlc sync 2/4 port V.35/X.21 serial driver 386# (requires sppp) 387# ath: Atheros a/b/g WiFi adapters (requires ath_hal and wlan) 388# ce: Cronyx Tau-PCI/32 sync single/dual port G.703/E1 serial adaptor 389# with 32 HDLC subchannels (requires sppp (default), or NETGRAPH if 390# NETGRAPH_CRONYX is configured) 391# cp: Cronyx Tau-PCI sync single/dual/four port 392# V.35/RS-232/RS-530/RS-449/X.21/G.703/E1/E3/T3/STS-1 393# serial adaptor (requires sppp (default), or NETGRAPH if 394# NETGRAPH_CRONYX is configured) 395# cs: IBM Etherjet and other Crystal Semi CS89x0-based adapters and pccard 396# ed: Western Digital and SMC 80xx; Novell NE1000 and NE2000; 3Com 3C503 397# HP PC Lan+, various PC Card devices 398# (requires miibus) 399# ie: AT&T StarLAN 10 and EN100; 3Com 3C507; unknown NI5210; 400# Intel EtherExpress 401# oltr: Olicom ISA token-ring adapters OC-3115, OC-3117, OC-3118 and OC-3133. 402# Olicom PCI token-ring adapters OC-3136, OC-3137, OC-3139, OC-3140, 403# OC-3141, OC-3540 and OC-3250. 404# ral: Ralink Technology IEEE 802.11 wireless adapter 405# sbni: Granch SBNI12-xx ISA and PCI adapters 406# sr: RISCom/N2 hdlc sync 1/2 port V.35/X.21 serial driver (requires sppp) 407# ural: Ralink Technology RT2500USB IEEE 802.11 wireless adapter 408 409# Order for ISA/EISA devices is important here 410 411device ar 412device ce 413device cp 414device cs 415device ed 416hint.ed.0.at="isa" 417hint.ed.0.port="0x280" 418hint.ed.0.irq="5" 419hint.ed.0.maddr="0xd8000" 420device ie # Hints only required for Starlan 421hint.ie.2.at="isa" 422hint.ie.2.port="0x300" 423hint.ie.2.irq="5" 424hint.ie.2.maddr="0xd0000" 425# Hint for the PC98-only C-NET(98)S C-bus front-end of le(4). 426hint.le.0.at="isa" 427hint.le.0.port="0x03d0" 428hint.le.0.irq="6" 429device oltr 430device ral 431device sbni 432hint.sbni.0.at="isa" 433hint.sbni.0.port="0x210" 434hint.sbni.0.irq="0xefdead" 435hint.sbni.0.flags="0" 436device snc 437hint.snc.0.at="isa" 438hint.snc.0.port="0x888" 439hint.snc.0.irq="6" 440hint.snc.0.maddr="0xc0000" 441device sr 442device ural 443 444device ath 445device ath_hal # Atheros HAL (includes binary component) 446#device ath_rate_amrr # AMRR rate control for ath driver 447#device ath_rate_onoe # Onoe rate control for ath driver 448device ath_rate_sample # SampleRate rate control for the ath driver 449#device wlan # 802.11 layer 450 451# 452# SCSI host adapters: 453# 454# ct: WD33C93[ABC] based SCSI host adapters. 455# ncv: NCR 53C500 based SCSI host adapters. 456# nsp: Workbit Ninja SCSI-3 based PC Card SCSI host adapters. 457# stg: TMC 18C30, 18C50 based SCSI host adapters. 458 459device ct 460hint.ct.0.at="isa" 461device ncv 462device nsp 463device stg 464 465# 466# SafeNet crypto driver: can be moved to the MI NOTES as soon as 467# it's tested on a big-endian machine 468# 469device safe # SafeNet 1141 470options SAFE_DEBUG # enable debugging support: hw.safe.debug 471options SAFE_RNDTEST # enable rndtest support 472 473##################################################################### 474 475# 476# Miscellaneous hardware: 477# 478# apm: Laptop Advanced Power Management (experimental) 479# pmtimer: Timer device driver for power management events (APM or ACPI) 480# cy: Cyclades serial driver 481# digi: Digiboard driver 482 483# Notes on APM 484# The flags takes the following meaning for apm0: 485# 0x0020 Statclock is broken. 486 487device apm 488hint.apm.0.flags="0x20" 489device canbus 490device canbepm 491device cy 492options CY_PCI_FASTINTR # Use with cy_pci unless irq is shared 493device digi 494# BIOS & FEP/OS components of device digi. 495device digi_CX 496device digi_CX_PCI 497device digi_EPCX 498device digi_EPCX_PCI 499device digi_Xe 500device digi_Xem 501device digi_Xr 502device olpt 503hint.olpt.0.at="isa" 504hint.olpt.0.port="0x040" 505device pmc 506hint.pmc.0.at="isa" 507hint.pmc.0.port="0x8f0" 508device pmtimer # Adjust system timer at wakeup time 509 510# 511# Laptop/Notebook options: 512# 513# See also: 514# apm under `Miscellaneous hardware' 515# above. 516 517# For older notebooks that signal a powerfail condition (external 518# power supply dropped, or battery state low) by issuing an NMI: 519 520options POWERFAIL_NMI # make it beep instead of panicing 521 522#--------------------------------------------------------------------------- 523# ISDN4BSD 524# 525# See /usr/share/examples/isdn/ROADMAP for an introduction to isdn4bsd. 526# 527# i4b passive ISDN cards support contains the following hardware drivers: 528# 529# isic - Siemens/Infineon ISDN ISAC/HSCX/IPAC chipset driver 530# iwic - Winbond W6692 PCI bus ISDN S/T interface controller 531# ifpi - AVM Fritz!Card PCI driver 532# ifpi2 - AVM Fritz!Card PCI version 2 driver 533# ihfc - Cologne Chip HFC ISA/ISA-PnP chipset driver 534# ifpnp - AVM Fritz!Card PnP driver 535# itjc - Siemens ISAC / TJNet Tiger300/320 chipset 536# 537# i4b active ISDN cards support contains the following hardware drivers: 538# 539# iavc - AVM B1 PCI, AVM B1 ISA, AVM T1 540# 541# Note that the ``options'' (if given) and ``device'' lines must BOTH 542# be uncommented to enable support for a given card ! 543# 544# In addition to a hardware driver (and probably an option) the mandatory 545# ISDN protocol stack devices and the mandatory support device must be 546# enabled as well as one or more devices from the optional devices section. 547# 548#--------------------------------------------------------------------------- 549# isic driver (Siemens/Infineon chipsets) 550# 551device isic 552# 553# PCI bus Cards: 554# -------------- 555# 556# ELSA MicroLink ISDN/PCI (same as ELSA QuickStep 1000pro PCI) 557options ELSA_QS1PCI 558# 559#--------------------------------------------------------------------------- 560# ifpnp driver for AVM Fritz!Card PnP 561# 562# AVM Fritz!Card PnP 563device ifpnp 564# 565#--------------------------------------------------------------------------- 566# ihfc driver for Cologne Chip ISA chipsets (experimental!) 567# 568# Teles 16.3c ISA PnP 569# AcerISDN P10 ISA PnP 570# TELEINT ISDN SPEED No.1 571device ihfc 572# 573#--------------------------------------------------------------------------- 574# ifpi driver for AVM Fritz!Card PCI 575# 576# AVM Fritz!Card PCI 577device ifpi 578# 579#--------------------------------------------------------------------------- 580# ifpi2 driver for AVM Fritz!Card PCI version 2 581# 582# AVM Fritz!Card PCI version 2 583device ifpi2 584# 585#--------------------------------------------------------------------------- 586# iwic driver for Winbond W6692 chipset 587# 588# ASUSCOM P-IN100-ST-D (and other Winbond W6692 based cards) 589device iwic 590# 591#--------------------------------------------------------------------------- 592# itjc driver for Siemens ISAC / TJNet Tiger300/320 chipset 593# 594# Traverse Technologies NETjet-S 595# Teles PCI-TJ 596device itjc 597# 598#--------------------------------------------------------------------------- 599# iavc driver (AVM active cards, needs i4bcapi driver!) 600# 601device iavc 602# 603#--------------------------------------------------------------------------- 604# ISDN Protocol Stack - mandatory for all hardware drivers 605# 606# Q.921 / layer 2 - i4b passive cards D channel handling 607device i4bq921 608# 609# Q.931 / layer 3 - i4b passive cards D channel handling 610device i4bq931 611# 612# layer 4 - i4b common passive and active card handling 613device i4b 614# 615#--------------------------------------------------------------------------- 616# ISDN devices - mandatory for all hardware drivers 617# 618# userland driver to do ISDN tracing (for passive cards only) 619device i4btrc 620options NI4BTRC=4 621# 622# userland driver to control the whole thing 623device i4bctl 624# 625#--------------------------------------------------------------------------- 626# ISDN devices - optional 627# 628# userland driver for access to raw B channel 629device i4brbch 630options NI4BRBCH=4 631# 632# userland driver for telephony 633device i4btel 634options NI4BTEL=2 635# 636# network driver for IP over raw HDLC ISDN 637device i4bipr 638options NI4BIPR=4 639# enable VJ header compression detection for ipr i/f 640options IPR_VJ 641# enable logging of the first n IP packets to isdnd (n=32 here) 642options IPR_LOG=32 643# 644# network driver for sync PPP over ISDN; requires an equivalent 645# number of sppp device to be configured 646device i4bisppp 647options NI4BISPPP=4 648# 649# B-channel interface to the netgraph subsystem 650device i4bing 651options NI4BING=2 652# 653# CAPI driver needed for active ISDN cards (see iavc driver above) 654device i4bcapi 655# 656#--------------------------------------------------------------------------- 657 658# 659# Set the number of PV entries per process. Increasing this can 660# stop panics related to heavy use of shared memory. However, that can 661# (combined with large amounts of physical memory) cause panics at 662# boot time due the kernel running out of VM space. 663# 664# If you're tweaking this, you might also want to increase the sysctls 665# "vm.v_free_min", "vm.v_free_reserved", and "vm.v_free_target". 666# 667# The value below is the one more than the default. 668# 669options PMAP_SHPGPERPROC=201 670 671# 672# Change the size of the kernel virtual address space. Due to 673# constraints in loader(8) on i386, this must be a multiple of 4. 674# 256 = 1 GB of kernel address space. Increasing this also causes 675# a reduction of the address space in user processes. 512 splits 676# the 4GB cpu address space in half (2GB user, 2GB kernel). 677# 678options KVA_PAGES=260 679 680 681##################################################################### 682# ABI Emulation 683 684# Enable iBCS2 runtime support for SCO and ISC binaries 685options IBCS2 686 687# Emulate spx device for client side of SVR3 local X interface 688options SPX_HACK 689 690# Enable Linux ABI emulation 691options COMPAT_LINUX 692 693# Enable i386 a.out binary support 694options COMPAT_AOUT 695 696# Enable the linux-like proc filesystem support (requires COMPAT_LINUX 697# and PSEUDOFS) 698options LINPROCFS 699 700# Enable the linux-like sys filesystem support (requires COMPAT_LINUX 701# and PSEUDOFS) 702options LINSYSFS 703 704# 705# SysVR4 ABI emulation 706# 707# The svr4 ABI emulator can be statically compiled into the kernel or loaded as 708# a KLD module. 709# The STREAMS network emulation code can also be compiled statically or as a 710# module. If loaded as a module, it must be loaded before the svr4 module 711# (the /usr/sbin/svr4 script does this for you). If compiling statically, 712# the `streams' device must be configured into any kernel which also 713# specifies COMPAT_SVR4. It is possible to have a statically-configured 714# STREAMS device and a dynamically loadable svr4 emulator; the /usr/sbin/svr4 715# script understands that it doesn't need to load the `streams' module under 716# those circumstances. 717# Caveat: At this time, `options KTRACE' is required for the svr4 emulator 718# (whether static or dynamic). 719# 720options COMPAT_SVR4 # build emulator statically 721options DEBUG_SVR4 # enable verbose debugging 722device streams # STREAMS network driver (required for svr4). 723 724 725##################################################################### 726# VM OPTIONS 727 728# Disable the 4 MByte page PSE CPU feature. The PSE feature allows the 729# kernel to use 4 MByte pages to map the kernel instead of 4k pages. 730# This saves on the amount of memory needed for page tables needed to 731# map the kernel. You should only disable this feature as a temporary 732# workaround if you are having problems with it enabled. 733# 734#options DISABLE_PSE 735 736# Disable the global pages PGE CPU feature. The PGE feature allows pages 737# to be marked with the PG_G bit. TLB entries for these pages are not 738# flushed from the cache when %cr3 is reloaded. This can make context 739# switches less expensive. You should only disable this feature as a 740# temporary workaround if you are having problems with it enabled. 741# 742#options DISABLE_PG_G 743 744# KSTACK_PAGES is the number of memory pages to assign to the kernel 745# stack of each thread. 746 747options KSTACK_PAGES=3 748 749##################################################################### 750 751# More undocumented options for linting. 752# Note that documenting these are not considered an affront. 753 754options FB_INSTALL_CDEV # install a CDEV entry in /dev 755 756# PECOFF module (Win32 Execution Format) 757options PECOFF_SUPPORT 758options PECOFF_DEBUG 759 760options I4B_SMP_WORKAROUND 761options I586_PMC_GUPROF=0x70000 762options KBDIO_DEBUG=2 763options KBD_MAXRETRY=4 764options KBD_MAXWAIT=6 765options KBD_RESETDELAY=201 766 767options TIMER_FREQ=((14318182+6)/12) 768 769options VM_KMEM_SIZE 770options VM_KMEM_SIZE_MAX 771options VM_KMEM_SIZE_SCALE 772 773 774# The I/O device 775device io 776 777 778##################################################################### 779# Devices we don't want to deal with 780 781nodevice atkbdc 782nodevice atkbd 783nodevice psm 784nodevice vga 785nodevice bt 786nodevice adw 787nodevice aha 788nodevice ahb 789nodevice ahd 790nodevice mpt 791nodevice trm 792nodevice wds 793nodevice dpt 794nodevice ciss 795nodevice iir 796nodevice mly 797nodevice ida # Compaq Smart RAID 798nodevice mlx # Mylex DAC960 799nodevice amr # AMI MegaRAID 800nodevice twe # 3ware ATA RAID 801nodevice ataraid 802nodevice cm 803nodevice ex 804nodevice fea 805nodevice intpm 806nodevice alpm 807nodevice ichsmb 808nodevice viapm 809nodevice amdpm 810nodevice amdsmb 811nodevice nfpm 812nodevice nfsmb 813 814 815##################################################################### 816# Options we don't want to deal with 817 818nooption VGA_DEBUG 819nooption VGA_WIDTH90 820nooption VGA_SLOW_IOACCESS 821nooption VGA_ALT_SEQACCESS 822nooption PSM_RESETAFTERSUSPEND 823nooption PSM_HOOKRESUME 824nooption ATKBD_DFLT_KEYMAP 825nooption AHD_DEBUG 826nooption AHD_DEBUG_OPTS 827nooption AHD_REG_PRETTY_PRINT 828nooption ADW_ALLOW_MEMIO 829nooption DPT_LOST_IRQ 830nooption DPT_RESET_HBA 831nooption DPT_TIMEOUT_FACTOR 832nooption AAC_DEBUG 833nooption ACPI_MAX_THREADS 834 835 836##################################################################### 837# Make options we don't want to deal with 838 839nomakeoption ATKBD_DFLT_KEYMAP
|