1/*- 2 * Copyright (c) 2001-2008, by Cisco Systems, Inc. All rights reserved. 3 * 4 * Redistribution and use in source and binary forms, with or without 5 * modification, are permitted provided that the following conditions are met: 6 * 7 * a) Redistributions of source code must retain the above copyright notice, 8 * this list of conditions and the following disclaimer. 9 * 10 * b) Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in 12 * the documentation and/or other materials provided with the distribution. 13 * 14 * c) Neither the name of Cisco Systems, Inc. nor the names of its 15 * contributors may be used to endorse or promote products derived 16 * from this software without specific prior written permission. 17 * 18 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 19 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, 20 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 21 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE 22 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 23 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 24 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 25 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 26 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 27 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 28 * THE POSSIBILITY OF SUCH DAMAGE. 29 */ 30 31/* $KAME: sctp_constants.h,v 1.17 2005/03/06 16:04:17 itojun Exp $ */ 32 33#include <sys/cdefs.h>
|
34__FBSDID("$FreeBSD: head/sys/netinet/sctp_constants.h 207966 2010-05-12 16:10:33Z tuexen $");
|
34__FBSDID("$FreeBSD: head/sys/netinet/sctp_constants.h 208160 2010-05-16 17:03:56Z rrs $"); |
35 36#ifndef __sctp_constants_h__ 37#define __sctp_constants_h__ 38 39/* IANA assigned port number for SCTP over UDP encapsulation */ 40/* For freebsd we cannot bind the port at 41 * startup. Otherwise what will happen is 42 * we really won't be bound. The user must 43 * put it into the sysctl... or we need 44 * to build a special timer for this to allow 45 * us to wait 1 second or so after the system 46 * comes up. 47 */ 48#define SCTP_OVER_UDP_TUNNELING_PORT 0 49/* Number of packets to get before sack sent by default */ 50#define SCTP_DEFAULT_SACK_FREQ 2 51 52/* Address limit - This variable is calculated 53 * based on an 65535 byte max ip packet. We take out 100 bytes 54 * for the cookie, 40 bytes for a v6 header and 32 55 * bytes for the init structure. A second init structure 56 * for the init-ack and then finally a third one for the 57 * imbedded init. This yeilds 100+40+(3 * 32) = 236 bytes. 58 * This leaves 65299 bytes for addresses. We throw out the 299 bytes. 59 * Now whatever we send in the INIT() we need to allow to get back in the 60 * INIT-ACK plus all the values from INIT and INIT-ACK 61 * listed in the cookie. Plus we need some overhead for 62 * maybe copied parameters in the COOKIE. If we 63 * allow 1080 addresses, and each side has 1080 V6 addresses 64 * that will be 21600 bytes. In the INIT-ACK we will 65 * see the INIT-ACK 21600 + 43200 in the cookie. This leaves 66 * about 500 bytes slack for misc things in the cookie. 67 */ 68#define SCTP_ADDRESS_LIMIT 1080 69 70/* We need at least 2k of space for us, inits 71 * larger than that lets abort. 72 */ 73#define SCTP_LARGEST_INIT_ACCEPTED (65535 - 2048) 74 75/* Number of addresses where we just skip the counting */ 76#define SCTP_COUNT_LIMIT 40 77 78#define SCTP_ZERO_COPY_TICK_DELAY (((100 * hz) + 999) / 1000) 79#define SCTP_ZERO_COPY_SENDQ_TICK_DELAY (((100 * hz) + 999) / 1000) 80 81/* Number of ticks to delay before running 82 * iterator on an address change. 83 */ 84#define SCTP_ADDRESS_TICK_DELAY 2 85 86#define SCTP_VERSION_STRING "KAME-BSD 1.1" 87/* #define SCTP_AUDITING_ENABLED 1 used for debug/auditing */ 88#define SCTP_AUDIT_SIZE 256 89
|
90/* temporary disabled since it does not work with VNET. */
91#if 0
92#define SCTP_USE_THREAD_BASED_ITERATOR 1
93#endif
|
90 91#define SCTP_KTRHEAD_NAME "sctp_iterator" 92#define SCTP_KTHREAD_PAGES 0 93 94 95/* If you support Multi-VRF how big to 96 * make the initial array of VRF's to. 97 */ 98#define SCTP_DEFAULT_VRF_SIZE 4 99 100/* constants for rto calc */ 101#define sctp_align_safe_nocopy 0 102#define sctp_align_unsafe_makecopy 1 103 104/* JRS - Values defined for the HTCP algorithm */ 105#define ALPHA_BASE (1<<7) /* 1.0 with shift << 7 */ 106#define BETA_MIN (1<<6) /* 0.5 with shift << 7 */ 107#define BETA_MAX 102 /* 0.8 with shift << 7 */ 108 109/* Places that CWND log can happen from */ 110#define SCTP_CWND_LOG_FROM_FR 1 111#define SCTP_CWND_LOG_FROM_RTX 2 112#define SCTP_CWND_LOG_FROM_BRST 3 113#define SCTP_CWND_LOG_FROM_SS 4 114#define SCTP_CWND_LOG_FROM_CA 5 115#define SCTP_CWND_LOG_FROM_SAT 6 116#define SCTP_BLOCK_LOG_INTO_BLK 7 117#define SCTP_BLOCK_LOG_OUTOF_BLK 8 118#define SCTP_BLOCK_LOG_CHECK 9 119#define SCTP_STR_LOG_FROM_INTO_STRD 10 120#define SCTP_STR_LOG_FROM_IMMED_DEL 11 121#define SCTP_STR_LOG_FROM_INSERT_HD 12 122#define SCTP_STR_LOG_FROM_INSERT_MD 13 123#define SCTP_STR_LOG_FROM_INSERT_TL 14 124#define SCTP_STR_LOG_FROM_MARK_TSN 15 125#define SCTP_STR_LOG_FROM_EXPRS_DEL 16 126#define SCTP_FR_LOG_BIGGEST_TSNS 17 127#define SCTP_FR_LOG_STRIKE_TEST 18 128#define SCTP_FR_LOG_STRIKE_CHUNK 19 129#define SCTP_FR_T3_TIMEOUT 20 130#define SCTP_MAP_PREPARE_SLIDE 21 131#define SCTP_MAP_SLIDE_FROM 22 132#define SCTP_MAP_SLIDE_RESULT 23 133#define SCTP_MAP_SLIDE_CLEARED 24 134#define SCTP_MAP_SLIDE_NONE 25 135#define SCTP_FR_T3_MARK_TIME 26 136#define SCTP_FR_T3_MARKED 27 137#define SCTP_FR_T3_STOPPED 28 138#define SCTP_FR_MARKED 30 139#define SCTP_CWND_LOG_NOADV_SS 31 140#define SCTP_CWND_LOG_NOADV_CA 32 141#define SCTP_MAX_BURST_APPLIED 33 142#define SCTP_MAX_IFP_APPLIED 34 143#define SCTP_MAX_BURST_ERROR_STOP 35 144#define SCTP_INCREASE_PEER_RWND 36 145#define SCTP_DECREASE_PEER_RWND 37 146#define SCTP_SET_PEER_RWND_VIA_SACK 38 147#define SCTP_LOG_MBCNT_INCREASE 39 148#define SCTP_LOG_MBCNT_DECREASE 40 149#define SCTP_LOG_MBCNT_CHKSET 41 150#define SCTP_LOG_NEW_SACK 42 151#define SCTP_LOG_TSN_ACKED 43 152#define SCTP_LOG_TSN_REVOKED 44 153#define SCTP_LOG_LOCK_TCB 45 154#define SCTP_LOG_LOCK_INP 46 155#define SCTP_LOG_LOCK_SOCK 47 156#define SCTP_LOG_LOCK_SOCKBUF_R 48 157#define SCTP_LOG_LOCK_SOCKBUF_S 49 158#define SCTP_LOG_LOCK_CREATE 50 159#define SCTP_LOG_INITIAL_RTT 51 160#define SCTP_LOG_RTTVAR 52 161#define SCTP_LOG_SBALLOC 53 162#define SCTP_LOG_SBFREE 54 163#define SCTP_LOG_SBRESULT 55 164#define SCTP_FR_DUPED 56 165#define SCTP_FR_MARKED_EARLY 57 166#define SCTP_FR_CWND_REPORT 58 167#define SCTP_FR_CWND_REPORT_START 59 168#define SCTP_FR_CWND_REPORT_STOP 60 169#define SCTP_CWND_LOG_FROM_SEND 61 170#define SCTP_CWND_INITIALIZATION 62 171#define SCTP_CWND_LOG_FROM_T3 63 172#define SCTP_CWND_LOG_FROM_SACK 64 173#define SCTP_CWND_LOG_NO_CUMACK 65 174#define SCTP_CWND_LOG_FROM_RESEND 66 175#define SCTP_FR_LOG_CHECK_STRIKE 67 176#define SCTP_SEND_NOW_COMPLETES 68 177#define SCTP_CWND_LOG_FILL_OUTQ_CALLED 69 178#define SCTP_CWND_LOG_FILL_OUTQ_FILLS 70 179#define SCTP_LOG_FREE_SENT 71 180#define SCTP_NAGLE_APPLIED 72 181#define SCTP_NAGLE_SKIPPED 73 182#define SCTP_WAKESND_FROM_SACK 74 183#define SCTP_WAKESND_FROM_FWDTSN 75 184#define SCTP_NOWAKE_FROM_SACK 76 185#define SCTP_CWNDLOG_PRESEND 77 186#define SCTP_CWNDLOG_ENDSEND 78 187#define SCTP_AT_END_OF_SACK 79 188#define SCTP_REASON_FOR_SC 80 189#define SCTP_BLOCK_LOG_INTO_BLKA 81 190#define SCTP_ENTER_USER_RECV 82 191#define SCTP_USER_RECV_SACKS 83 192#define SCTP_SORECV_BLOCKSA 84 193#define SCTP_SORECV_BLOCKSB 85 194#define SCTP_SORECV_DONE 86 195#define SCTP_SACK_RWND_UPDATE 87 196#define SCTP_SORECV_ENTER 88 197#define SCTP_SORECV_ENTERPL 89 198#define SCTP_MBUF_INPUT 90 199#define SCTP_MBUF_IALLOC 91 200#define SCTP_MBUF_IFREE 92 201#define SCTP_MBUF_ICOPY 93 202#define SCTP_MBUF_SPLIT 94 203#define SCTP_SORCV_FREECTL 95 204#define SCTP_SORCV_DOESCPY 96 205#define SCTP_SORCV_DOESLCK 97 206#define SCTP_SORCV_DOESADJ 98 207#define SCTP_SORCV_BOTWHILE 99 208#define SCTP_SORCV_PASSBF 100 209#define SCTP_SORCV_ADJD 101 210#define SCTP_UNKNOWN_MAX 102 211#define SCTP_RANDY_STUFF 103 212#define SCTP_RANDY_STUFF1 104 213#define SCTP_STRMOUT_LOG_ASSIGN 105 214#define SCTP_STRMOUT_LOG_SEND 106 215#define SCTP_FLIGHT_LOG_DOWN_CA 107 216#define SCTP_FLIGHT_LOG_UP 108 217#define SCTP_FLIGHT_LOG_DOWN_GAP 109 218#define SCTP_FLIGHT_LOG_DOWN_RSND 110 219#define SCTP_FLIGHT_LOG_UP_RSND 111 220#define SCTP_FLIGHT_LOG_DOWN_RSND_TO 112 221#define SCTP_FLIGHT_LOG_DOWN_WP 113 222#define SCTP_FLIGHT_LOG_UP_REVOKE 114 223#define SCTP_FLIGHT_LOG_DOWN_PDRP 115 224#define SCTP_FLIGHT_LOG_DOWN_PMTU 116 225#define SCTP_SACK_LOG_NORMAL 117 226#define SCTP_SACK_LOG_EXPRESS 118 227#define SCTP_MAP_TSN_ENTERS 119 228#define SCTP_THRESHOLD_CLEAR 120 229#define SCTP_THRESHOLD_INCR 121 230#define SCTP_FLIGHT_LOG_DWN_WP_FWD 122 231#define SCTP_FWD_TSN_CHECK 123 232#define SCTP_LOG_MAX_TYPES 124 233/* 234 * To turn on various logging, you must first enable 'options KTR' and 235 * you might want to bump the entires 'options KTR_ENTRIES=80000'. 236 * To get something to log you define one of the logging defines. 237 * (see LINT). 238 * 239 * This gets the compile in place, but you still need to turn the 240 * logging flag on too in the sysctl (see in sctp.h). 241 */ 242 243#define SCTP_LOG_EVENT_UNKNOWN 0 244#define SCTP_LOG_EVENT_CWND 1 245#define SCTP_LOG_EVENT_BLOCK 2 246#define SCTP_LOG_EVENT_STRM 3 247#define SCTP_LOG_EVENT_FR 4 248#define SCTP_LOG_EVENT_MAP 5 249#define SCTP_LOG_EVENT_MAXBURST 6 250#define SCTP_LOG_EVENT_RWND 7 251#define SCTP_LOG_EVENT_MBCNT 8 252#define SCTP_LOG_EVENT_SACK 9 253#define SCTP_LOG_LOCK_EVENT 10 254#define SCTP_LOG_EVENT_RTT 11 255#define SCTP_LOG_EVENT_SB 12 256#define SCTP_LOG_EVENT_NAGLE 13 257#define SCTP_LOG_EVENT_WAKE 14 258#define SCTP_LOG_MISC_EVENT 15 259#define SCTP_LOG_EVENT_CLOSE 16 260#define SCTP_LOG_EVENT_MBUF 17 261#define SCTP_LOG_CHUNK_PROC 18 262#define SCTP_LOG_ERROR_RET 19 263 264#define SCTP_LOG_MAX_EVENT 20 265 266#define SCTP_LOCK_UNKNOWN 2 267 268 269/* number of associations by default for zone allocation */ 270#define SCTP_MAX_NUM_OF_ASOC 40000 271/* how many addresses per assoc remote and local */ 272#define SCTP_SCALE_FOR_ADDR 2 273 274/* default AUTO_ASCONF mode enable(1)/disable(0) value (sysctl) */ 275#define SCTP_DEFAULT_AUTO_ASCONF 1 276 277/* default MULTIPLE_ASCONF mode enable(1)/disable(0) value (sysctl) */ 278#define SCTP_DEFAULT_MULTIPLE_ASCONFS 0 279 280/* default MOBILITY_BASE mode enable(1)/disable(0) value (sysctl) */ 281#define SCTP_DEFAULT_MOBILITY_BASE 0 282 283/* default MOBILITY_FASTHANDOFF mode enable(1)/disable(0) value (sysctl) */ 284#define SCTP_DEFAULT_MOBILITY_FASTHANDOFF 0 285 286/* 287 * Theshold for rwnd updates, we have to read (sb_hiwat >> 288 * SCTP_RWND_HIWAT_SHIFT) before we will look to see if we need to send a 289 * window update sack. When we look, we compare the last rwnd we sent vs the 290 * current rwnd. It too must be greater than this value. Using 3 divdes the 291 * hiwat by 8, so for 200k rwnd we need to read 24k. For a 64k rwnd we need 292 * to read 8k. This seems about right.. I hope :-D.. we do set a 293 * min of a MTU on it so if the rwnd is real small we will insist 294 * on a full MTU of 1500 bytes. 295 */ 296#define SCTP_RWND_HIWAT_SHIFT 3 297 298/* How much of the rwnd must the 299 * message be taking up to start partial delivery. 300 * We calculate this by shifing the hi_water (recv_win) 301 * left the following .. set to 1, when a message holds 302 * 1/2 the rwnd. If we set it to 2 when a message holds 303 * 1/4 the rwnd...etc.. 304 */ 305 306#define SCTP_PARTIAL_DELIVERY_SHIFT 1 307 308/* 309 * default HMAC for cookies, etc... use one of the AUTH HMAC id's 310 * SCTP_HMAC is the HMAC_ID to use 311 * SCTP_SIGNATURE_SIZE is the digest length 312 */ 313#define SCTP_HMAC SCTP_AUTH_HMAC_ID_SHA1 314#define SCTP_SIGNATURE_SIZE SCTP_AUTH_DIGEST_LEN_SHA1 315#define SCTP_SIGNATURE_ALOC_SIZE SCTP_SIGNATURE_SIZE 316 317/* 318 * the SCTP protocol signature this includes the version number encoded in 319 * the last 4 bits of the signature. 320 */ 321#define PROTO_SIGNATURE_A 0x30000000 322#define SCTP_VERSION_NUMBER 0x3 323 324#define MAX_TSN 0xffffffff 325#define MAX_SEQ 0xffff 326 327/* how many executions every N tick's */ 328#define SCTP_ITERATOR_MAX_AT_ONCE 20 329 330/* number of clock ticks between iterator executions */ 331#define SCTP_ITERATOR_TICKS 1 332 333/* 334 * option: If you comment out the following you will receive the old behavior 335 * of obeying cwnd for the fast retransmit algorithm. With this defined a FR 336 * happens right away with-out waiting for the flightsize to drop below the 337 * cwnd value (which is reduced by the FR to 1/2 the inflight packets). 338 */ 339#define SCTP_IGNORE_CWND_ON_FR 1 340 341/* 342 * Adds implementors guide behavior to only use newest highest update in SACK 343 * gap ack's to figure out if you need to stroke a chunk for FR. 344 */ 345#define SCTP_NO_FR_UNLESS_SEGMENT_SMALLER 1 346 347/* default max I can burst out after a fast retransmit */ 348#define SCTP_DEF_MAX_BURST 4 349/* IP hdr (20/40) + 12+2+2 (enet) + sctp common 12 */ 350#define SCTP_FIRST_MBUF_RESV 68 351/* Packet transmit states in the sent field */ 352#define SCTP_DATAGRAM_UNSENT 0 353#define SCTP_DATAGRAM_SENT 1 354#define SCTP_DATAGRAM_RESEND1 2 /* not used (in code, but may 355 * hit this value) */ 356#define SCTP_DATAGRAM_RESEND2 3 /* not used (in code, but may 357 * hit this value) */ 358#define SCTP_DATAGRAM_RESEND 4 359#define SCTP_DATAGRAM_ACKED 10010 360#define SCTP_DATAGRAM_MARKED 20010 361#define SCTP_FORWARD_TSN_SKIP 30010 362 363/* chunk output send from locations */ 364#define SCTP_OUTPUT_FROM_USR_SEND 0 365#define SCTP_OUTPUT_FROM_T3 1 366#define SCTP_OUTPUT_FROM_INPUT_ERROR 2 367#define SCTP_OUTPUT_FROM_CONTROL_PROC 3 368#define SCTP_OUTPUT_FROM_SACK_TMR 4 369#define SCTP_OUTPUT_FROM_SHUT_TMR 5 370#define SCTP_OUTPUT_FROM_HB_TMR 6 371#define SCTP_OUTPUT_FROM_SHUT_ACK_TMR 7 372#define SCTP_OUTPUT_FROM_ASCONF_TMR 8 373#define SCTP_OUTPUT_FROM_STRRST_TMR 9 374#define SCTP_OUTPUT_FROM_AUTOCLOSE_TMR 10 375#define SCTP_OUTPUT_FROM_EARLY_FR_TMR 11 376#define SCTP_OUTPUT_FROM_STRRST_REQ 12 377#define SCTP_OUTPUT_FROM_USR_RCVD 13 378#define SCTP_OUTPUT_FROM_COOKIE_ACK 14 379#define SCTP_OUTPUT_FROM_DRAIN 15 380#define SCTP_OUTPUT_FROM_CLOSING 16 381/* SCTP chunk types are moved sctp.h for application (NAT, FW) use */ 382 383/* align to 32-bit sizes */ 384#define SCTP_SIZE32(x) ((((x)+3) >> 2) << 2) 385 386#define IS_SCTP_CONTROL(a) ((a)->chunk_type != SCTP_DATA) 387#define IS_SCTP_DATA(a) ((a)->chunk_type == SCTP_DATA) 388 389 390/* SCTP parameter types */ 391/*************0x0000 series*************/ 392#define SCTP_HEARTBEAT_INFO 0x0001 393#define SCTP_IPV4_ADDRESS 0x0005 394#define SCTP_IPV6_ADDRESS 0x0006 395#define SCTP_STATE_COOKIE 0x0007 396#define SCTP_UNRECOG_PARAM 0x0008 397#define SCTP_COOKIE_PRESERVE 0x0009 398#define SCTP_HOSTNAME_ADDRESS 0x000b 399#define SCTP_SUPPORTED_ADDRTYPE 0x000c 400 401/* draft-ietf-stewart-tsvwg-strreset-xxx */ 402#define SCTP_STR_RESET_OUT_REQUEST 0x000d 403#define SCTP_STR_RESET_IN_REQUEST 0x000e 404#define SCTP_STR_RESET_TSN_REQUEST 0x000f 405#define SCTP_STR_RESET_RESPONSE 0x0010 406#define SCTP_STR_RESET_ADD_STREAMS 0x0011 407 408#define SCTP_MAX_RESET_PARAMS 2 409#define SCTP_STREAM_RESET_TSN_DELTA 0x1000 410 411/*************0x4000 series*************/ 412 413/*************0x8000 series*************/ 414#define SCTP_ECN_CAPABLE 0x8000 415/* ECN Nonce: draft-ladha-sctp-ecn-nonce */ 416#define SCTP_ECN_NONCE_SUPPORTED 0x8001 417/* draft-ietf-tsvwg-auth-xxx */ 418#define SCTP_RANDOM 0x8002 419#define SCTP_CHUNK_LIST 0x8003 420#define SCTP_HMAC_LIST 0x8004 421/* 422 * draft-ietf-tsvwg-addip-sctp-xx param=0x8008 len=0xNNNN Byte | Byte | Byte 423 * | Byte Byte | Byte ... 424 * 425 * Where each byte is a chunk type extension supported. For example, to support 426 * all chunks one would have (in hex): 427 * 428 * 80 01 00 09 C0 C1 80 81 82 00 00 00 429 * 430 * Has the parameter. C0 = PR-SCTP (RFC3758) C1, 80 = ASCONF (addip draft) 81 431 * = Packet Drop 82 = Stream Reset 83 = Authentication 432 */ 433#define SCTP_SUPPORTED_CHUNK_EXT 0x8008 434 435/*************0xC000 series*************/ 436#define SCTP_PRSCTP_SUPPORTED 0xc000 437/* draft-ietf-tsvwg-addip-sctp */ 438#define SCTP_ADD_IP_ADDRESS 0xc001 439#define SCTP_DEL_IP_ADDRESS 0xc002 440#define SCTP_ERROR_CAUSE_IND 0xc003 441#define SCTP_SET_PRIM_ADDR 0xc004 442#define SCTP_SUCCESS_REPORT 0xc005 443#define SCTP_ULP_ADAPTATION 0xc006 444/* behave-nat-draft */ 445#define SCTP_HAS_NAT_SUPPORT 0xc007 446#define SCTP_NAT_VTAGS 0xc008 447 448/* Notification error codes */ 449#define SCTP_NOTIFY_DATAGRAM_UNSENT 0x0001 450#define SCTP_NOTIFY_DATAGRAM_SENT 0x0002 451#define SCTP_FAILED_THRESHOLD 0x0004 452#define SCTP_HEARTBEAT_SUCCESS 0x0008 453#define SCTP_RESPONSE_TO_USER_REQ 0x0010 454#define SCTP_INTERNAL_ERROR 0x0020 455#define SCTP_SHUTDOWN_GUARD_EXPIRES 0x0040 456#define SCTP_RECEIVED_SACK 0x0080 457#define SCTP_PEER_FAULTY 0x0100 458#define SCTP_ICMP_REFUSED 0x0200 459 460/* bits for TOS field */ 461#define SCTP_ECT0_BIT 0x02 462#define SCTP_ECT1_BIT 0x01 463#define SCTP_CE_BITS 0x03 464 465/* below turns off above */ 466#define SCTP_FLEXIBLE_ADDRESS 0x20 467#define SCTP_NO_HEARTBEAT 0x40 468 469/* mask to get sticky */ 470#define SCTP_STICKY_OPTIONS_MASK 0x0c 471 472 473/* 474 * SCTP states for internal state machine XXX (should match "user" values) 475 */ 476#define SCTP_STATE_EMPTY 0x0000 477#define SCTP_STATE_INUSE 0x0001 478#define SCTP_STATE_COOKIE_WAIT 0x0002 479#define SCTP_STATE_COOKIE_ECHOED 0x0004 480#define SCTP_STATE_OPEN 0x0008 481#define SCTP_STATE_SHUTDOWN_SENT 0x0010 482#define SCTP_STATE_SHUTDOWN_RECEIVED 0x0020 483#define SCTP_STATE_SHUTDOWN_ACK_SENT 0x0040 484#define SCTP_STATE_SHUTDOWN_PENDING 0x0080 485#define SCTP_STATE_CLOSED_SOCKET 0x0100 486#define SCTP_STATE_ABOUT_TO_BE_FREED 0x0200 487#define SCTP_STATE_PARTIAL_MSG_LEFT 0x0400 488#define SCTP_STATE_WAS_ABORTED 0x0800 489#define SCTP_STATE_IN_ACCEPT_QUEUE 0x1000 490#define SCTP_STATE_MASK 0x007f 491 492#define SCTP_GET_STATE(asoc) ((asoc)->state & SCTP_STATE_MASK) 493#define SCTP_SET_STATE(asoc, newstate) ((asoc)->state = ((asoc)->state & ~SCTP_STATE_MASK) | newstate) 494#define SCTP_CLEAR_SUBSTATE(asoc, substate) ((asoc)->state &= ~substate) 495#define SCTP_ADD_SUBSTATE(asoc, substate) ((asoc)->state |= substate) 496 497/* SCTP reachability state for each address */ 498#define SCTP_ADDR_REACHABLE 0x001 499#define SCTP_ADDR_NOT_REACHABLE 0x002 500#define SCTP_ADDR_NOHB 0x004 501#define SCTP_ADDR_BEING_DELETED 0x008 502#define SCTP_ADDR_NOT_IN_ASSOC 0x010 503#define SCTP_ADDR_WAS_PRIMARY 0x020 504#define SCTP_ADDR_SWITCH_PRIMARY 0x040 505#define SCTP_ADDR_OUT_OF_SCOPE 0x080 506#define SCTP_ADDR_DOUBLE_SWITCH 0x100 507#define SCTP_ADDR_UNCONFIRMED 0x200 508#define SCTP_ADDR_REQ_PRIMARY 0x400 509/* JRS 5/13/07 - Added potentially failed state for CMT PF */ 510#define SCTP_ADDR_PF 0x800 511#define SCTP_REACHABLE_MASK 0x203 512 513/* bound address types (e.g. valid address types to allow) */ 514#define SCTP_BOUND_V6 0x01 515#define SCTP_BOUND_V4 0x02 516 517/* 518 * what is the default number of mbufs in a chain I allow before switching to 519 * a cluster 520 */ 521#define SCTP_DEFAULT_MBUFS_IN_CHAIN 5 522 523/* How long a cookie lives in milli-seconds */ 524#define SCTP_DEFAULT_COOKIE_LIFE 60000 525 526/* resource limit of streams */ 527#define MAX_SCTP_STREAMS 2048 528 529/* Maximum the mapping array will grow to (TSN mapping array) */ 530#define SCTP_MAPPING_ARRAY 512 531 532/* size of the inital malloc on the mapping array */ 533#define SCTP_INITIAL_MAPPING_ARRAY 16 534/* how much we grow the mapping array each call */ 535#define SCTP_MAPPING_ARRAY_INCR 32 536 537/* 538 * Here we define the timer types used by the implementation as arguments in 539 * the set/get timer type calls. 540 */ 541#define SCTP_TIMER_INIT 0 542#define SCTP_TIMER_RECV 1 543#define SCTP_TIMER_SEND 2 544#define SCTP_TIMER_HEARTBEAT 3 545#define SCTP_TIMER_PMTU 4 546#define SCTP_TIMER_MAXSHUTDOWN 5 547#define SCTP_TIMER_SIGNATURE 6 548/* 549 * number of timer types in the base SCTP structure used in the set/get and 550 * has the base default. 551 */ 552#define SCTP_NUM_TMRS 7 553 554/* timer types */ 555#define SCTP_TIMER_TYPE_NONE 0 556#define SCTP_TIMER_TYPE_SEND 1 557#define SCTP_TIMER_TYPE_INIT 2 558#define SCTP_TIMER_TYPE_RECV 3 559#define SCTP_TIMER_TYPE_SHUTDOWN 4 560#define SCTP_TIMER_TYPE_HEARTBEAT 5 561#define SCTP_TIMER_TYPE_COOKIE 6 562#define SCTP_TIMER_TYPE_NEWCOOKIE 7 563#define SCTP_TIMER_TYPE_PATHMTURAISE 8 564#define SCTP_TIMER_TYPE_SHUTDOWNACK 9 565#define SCTP_TIMER_TYPE_ASCONF 10 566#define SCTP_TIMER_TYPE_SHUTDOWNGUARD 11 567#define SCTP_TIMER_TYPE_AUTOCLOSE 12 568#define SCTP_TIMER_TYPE_EVENTWAKE 13 569#define SCTP_TIMER_TYPE_STRRESET 14 570#define SCTP_TIMER_TYPE_INPKILL 15
|
575#define SCTP_TIMER_TYPE_ITERATOR 16
|
571#define SCTP_TIMER_TYPE_EARLYFR 17 572#define SCTP_TIMER_TYPE_ASOCKILL 18 573#define SCTP_TIMER_TYPE_ADDR_WQ 19 574#define SCTP_TIMER_TYPE_ZERO_COPY 20 575#define SCTP_TIMER_TYPE_ZCOPY_SENDQ 21 576#define SCTP_TIMER_TYPE_PRIM_DELETED 22 577/* add new timers here - and increment LAST */ 578#define SCTP_TIMER_TYPE_LAST 23 579 580#define SCTP_IS_TIMER_TYPE_VALID(t) (((t) > SCTP_TIMER_TYPE_NONE) && \ 581 ((t) < SCTP_TIMER_TYPE_LAST)) 582 583 584 585/* max number of TSN's dup'd that I will hold */ 586#define SCTP_MAX_DUP_TSNS 20 587 588/* 589 * Here we define the types used when setting the retry amounts. 590 */ 591/* How many drop re-attempts we make on INIT/COOKIE-ECHO */ 592#define SCTP_RETRY_DROPPED_THRESH 4 593 594/* 595 * Maxmium number of chunks a single association can have on it. Note that 596 * this is a squishy number since the count can run over this if the user 597 * sends a large message down .. the fragmented chunks don't count until 598 * AFTER the message is on queue.. it would be the next send that blocks 599 * things. This number will get tuned up at boot in the sctp_init and use the 600 * number of clusters as a base. This way high bandwidth environments will 601 * not get impacted by the lower bandwidth sending a bunch of 1 byte chunks 602 */ 603#define SCTP_ASOC_MAX_CHUNKS_ON_QUEUE 512 604 605 606/* The conversion from time to ticks and vice versa is done by rounding 607 * upwards. This way we can test in the code the time to be positive and 608 * know that this corresponds to a positive number of ticks. 609 */ 610#define MSEC_TO_TICKS(x) ((hz == 1000) ? x : ((((x) * hz) + 999) / 1000)) 611#define TICKS_TO_MSEC(x) ((hz == 1000) ? x : ((((x) * 1000) + (hz - 1)) / hz)) 612 613#define SEC_TO_TICKS(x) ((x) * hz) 614#define TICKS_TO_SEC(x) (((x) + (hz - 1)) / hz) 615 616/* 617 * Basically the minimum amount of time before I do a early FR. Making this 618 * value to low will cause duplicate retransmissions. 619 */ 620#define SCTP_MINFR_MSEC_TIMER 250 621/* The floor this value is allowed to fall to when starting a timer. */ 622#define SCTP_MINFR_MSEC_FLOOR 20 623 624/* init timer def = 1 sec */ 625#define SCTP_INIT_SEC 1 626 627/* send timer def = 1 seconds */ 628#define SCTP_SEND_SEC 1 629 630/* recv timer def = 200ms */ 631#define SCTP_RECV_MSEC 200 632 633/* 30 seconds + RTO (in ms) */ 634#define SCTP_HB_DEFAULT_MSEC 30000 635 636/* Max time I will wait for Shutdown to complete */ 637#define SCTP_DEF_MAX_SHUTDOWN_SEC 180 638 639 640/* 641 * This is how long a secret lives, NOT how long a cookie lives how many 642 * ticks the current secret will live. 643 */ 644#define SCTP_DEFAULT_SECRET_LIFE_SEC 3600 645 646#define SCTP_RTO_UPPER_BOUND (60000) /* 60 sec in ms */ 647#define SCTP_RTO_UPPER_BOUND_SEC 60 /* for the init timer */ 648#define SCTP_RTO_LOWER_BOUND (1000) /* 1 sec in ms */ 649#define SCTP_RTO_INITIAL (3000) /* 3 sec in ms */ 650 651 652#define SCTP_INP_KILL_TIMEOUT 20/* number of ms to retry kill of inpcb */ 653#define SCTP_ASOC_KILL_TIMEOUT 10 /* number of ms to retry kill of inpcb */ 654 655#define SCTP_DEF_MAX_INIT 8 656#define SCTP_DEF_MAX_SEND 10 657#define SCTP_DEF_MAX_PATH_RTX 5 658 659#define SCTP_DEF_PMTU_RAISE_SEC 600 /* 10 min between raise attempts */ 660 661 662/* How many streams I request initally by default */ 663#define SCTP_OSTREAM_INITIAL 10 664 665/* 666 * How many smallest_mtu's need to increase before a window update sack is 667 * sent (should be a power of 2). 668 */ 669/* Send window update (incr * this > hiwat). Should be a power of 2 */ 670#define SCTP_MINIMAL_RWND (4096) /* minimal rwnd */ 671 672#define SCTP_ADDRMAX 24 673 674/* SCTP DEBUG Switch parameters */ 675#define SCTP_DEBUG_TIMER1 0x00000001 676#define SCTP_DEBUG_TIMER2 0x00000002 /* unused */ 677#define SCTP_DEBUG_TIMER3 0x00000004 /* unused */ 678#define SCTP_DEBUG_TIMER4 0x00000008 679#define SCTP_DEBUG_OUTPUT1 0x00000010 680#define SCTP_DEBUG_OUTPUT2 0x00000020 681#define SCTP_DEBUG_OUTPUT3 0x00000040 682#define SCTP_DEBUG_OUTPUT4 0x00000080 683#define SCTP_DEBUG_UTIL1 0x00000100 684#define SCTP_DEBUG_UTIL2 0x00000200 /* unused */ 685#define SCTP_DEBUG_AUTH1 0x00000400 686#define SCTP_DEBUG_AUTH2 0x00000800 /* unused */ 687#define SCTP_DEBUG_INPUT1 0x00001000 688#define SCTP_DEBUG_INPUT2 0x00002000 689#define SCTP_DEBUG_INPUT3 0x00004000 690#define SCTP_DEBUG_INPUT4 0x00008000 /* unused */ 691#define SCTP_DEBUG_ASCONF1 0x00010000 692#define SCTP_DEBUG_ASCONF2 0x00020000 693#define SCTP_DEBUG_OUTPUT5 0x00040000 /* unused */ 694#define SCTP_DEBUG_XXX 0x00080000 /* unused */ 695#define SCTP_DEBUG_PCB1 0x00100000 696#define SCTP_DEBUG_PCB2 0x00200000 /* unused */ 697#define SCTP_DEBUG_PCB3 0x00400000 698#define SCTP_DEBUG_PCB4 0x00800000 699#define SCTP_DEBUG_INDATA1 0x01000000 700#define SCTP_DEBUG_INDATA2 0x02000000 /* unused */ 701#define SCTP_DEBUG_INDATA3 0x04000000 /* unused */ 702#define SCTP_DEBUG_CRCOFFLOAD 0x08000000 /* unused */ 703#define SCTP_DEBUG_USRREQ1 0x10000000 /* unused */ 704#define SCTP_DEBUG_USRREQ2 0x20000000 /* unused */ 705#define SCTP_DEBUG_PEEL1 0x40000000 706#define SCTP_DEBUG_XXXXX 0x80000000 /* unused */ 707#define SCTP_DEBUG_ALL 0x7ff3ffff 708#define SCTP_DEBUG_NOISY 0x00040000 709 710/* What sender needs to see to avoid SWS or we consider peers rwnd 0 */ 711#define SCTP_SWS_SENDER_DEF 1420 712 713/* 714 * SWS is scaled to the sb_hiwat of the socket. A value of 2 is hiwat/4, 1 715 * would be hiwat/2 etc. 716 */ 717/* What receiver needs to see in sockbuf or we tell peer its 1 */ 718#define SCTP_SWS_RECEIVER_DEF 3000 719 720#define SCTP_INITIAL_CWND 4380 721 722#define SCTP_DEFAULT_MTU 1500 /* emergency default MTU */ 723/* amount peer is obligated to have in rwnd or I will abort */ 724#define SCTP_MIN_RWND 1500 725 726#define SCTP_DEFAULT_MAXSEGMENT 65535 727 728#define SCTP_CHUNK_BUFFER_SIZE 512 729#define SCTP_PARAM_BUFFER_SIZE 512 730 731/* small chunk store for looking at chunk_list in auth */ 732#define SCTP_SMALL_CHUNK_STORE 260 733 734#define SCTP_DEFAULT_MINSEGMENT 512 /* MTU size ... if no mtu disc */ 735#define SCTP_HOW_MANY_SECRETS 2 /* how many secrets I keep */ 736 737#define SCTP_NUMBER_OF_SECRETS 8 /* or 8 * 4 = 32 octets */ 738#define SCTP_SECRET_SIZE 32 /* number of octets in a 256 bits */ 739 740 741/* 742 * SCTP upper layer notifications 743 */ 744#define SCTP_NOTIFY_ASSOC_UP 1 745#define SCTP_NOTIFY_ASSOC_DOWN 2 746#define SCTP_NOTIFY_INTERFACE_DOWN 3 747#define SCTP_NOTIFY_INTERFACE_UP 4 748#define SCTP_NOTIFY_DG_FAIL 5 749#define SCTP_NOTIFY_STRDATA_ERR 6 750#define SCTP_NOTIFY_ASSOC_ABORTED 7 751#define SCTP_NOTIFY_PEER_OPENED_STREAM 8 752#define SCTP_NOTIFY_STREAM_OPENED_OK 9 753#define SCTP_NOTIFY_ASSOC_RESTART 10 754#define SCTP_NOTIFY_HB_RESP 11 755#define SCTP_NOTIFY_ASCONF_SUCCESS 12 756#define SCTP_NOTIFY_ASCONF_FAILED 13 757#define SCTP_NOTIFY_PEER_SHUTDOWN 14 758#define SCTP_NOTIFY_ASCONF_ADD_IP 15 759#define SCTP_NOTIFY_ASCONF_DELETE_IP 16 760#define SCTP_NOTIFY_ASCONF_SET_PRIMARY 17 761#define SCTP_NOTIFY_PARTIAL_DELVIERY_INDICATION 18 762#define SCTP_NOTIFY_INTERFACE_CONFIRMED 20 763#define SCTP_NOTIFY_STR_RESET_RECV 21 764#define SCTP_NOTIFY_STR_RESET_SEND 22 765#define SCTP_NOTIFY_STR_RESET_FAILED_OUT 23 766#define SCTP_NOTIFY_STR_RESET_FAILED_IN 24 767#define SCTP_NOTIFY_AUTH_NEW_KEY 25 768#define SCTP_NOTIFY_AUTH_FREE_KEY 26 769#define SCTP_NOTIFY_SPECIAL_SP_FAIL 27 770#define SCTP_NOTIFY_NO_PEER_AUTH 28 771#define SCTP_NOTIFY_SENDER_DRY 29 772#define SCTP_NOTIFY_STR_RESET_ADD_OK 30 773#define SCTP_NOTIFY_STR_RESET_ADD_FAIL 31 774#define SCTP_NOTIFY_STR_RESET_INSTREAM_ADD_OK 32 775#define SCTP_NOTIFY_MAX 32 776 777 778/* This is the value for messages that are NOT completely 779 * copied down where we will start to split the message. 780 * So, with our default, we split only if the piece we 781 * want to take will fill up a full MTU (assuming 782 * a 1500 byte MTU). 783 */ 784#define SCTP_DEFAULT_SPLIT_POINT_MIN 2904 785 786/* ABORT CODES and other tell-tale location 787 * codes are generated by adding the below 788 * to the instance id. 789 */ 790 791/* File defines */ 792#define SCTP_FROM_SCTP_INPUT 0x10000000 793#define SCTP_FROM_SCTP_PCB 0x20000000 794#define SCTP_FROM_SCTP_INDATA 0x30000000 795#define SCTP_FROM_SCTP_TIMER 0x40000000 796#define SCTP_FROM_SCTP_USRREQ 0x50000000 797#define SCTP_FROM_SCTPUTIL 0x60000000 798#define SCTP_FROM_SCTP6_USRREQ 0x70000000 799#define SCTP_FROM_SCTP_ASCONF 0x80000000 800#define SCTP_FROM_SCTP_OUTPUT 0x90000000 801#define SCTP_FROM_SCTP_PEELOFF 0xa0000000 802#define SCTP_FROM_SCTP_PANDA 0xb0000000 803#define SCTP_FROM_SCTP_SYSCTL 0xc0000000 804 805/* Location ID's */ 806#define SCTP_LOC_1 0x00000001 807#define SCTP_LOC_2 0x00000002 808#define SCTP_LOC_3 0x00000003 809#define SCTP_LOC_4 0x00000004 810#define SCTP_LOC_5 0x00000005 811#define SCTP_LOC_6 0x00000006 812#define SCTP_LOC_7 0x00000007 813#define SCTP_LOC_8 0x00000008 814#define SCTP_LOC_9 0x00000009 815#define SCTP_LOC_10 0x0000000a 816#define SCTP_LOC_11 0x0000000b 817#define SCTP_LOC_12 0x0000000c 818#define SCTP_LOC_13 0x0000000d 819#define SCTP_LOC_14 0x0000000e 820#define SCTP_LOC_15 0x0000000f 821#define SCTP_LOC_16 0x00000010 822#define SCTP_LOC_17 0x00000011 823#define SCTP_LOC_18 0x00000012 824#define SCTP_LOC_19 0x00000013 825#define SCTP_LOC_20 0x00000014 826#define SCTP_LOC_21 0x00000015 827#define SCTP_LOC_22 0x00000016 828#define SCTP_LOC_23 0x00000017 829#define SCTP_LOC_24 0x00000018 830#define SCTP_LOC_25 0x00000019 831#define SCTP_LOC_26 0x0000001a 832#define SCTP_LOC_27 0x0000001b 833#define SCTP_LOC_28 0x0000001c 834#define SCTP_LOC_29 0x0000001d 835#define SCTP_LOC_30 0x0000001e 836#define SCTP_LOC_31 0x0000001f 837#define SCTP_LOC_32 0x00000020 838#define SCTP_LOC_33 0x00000021 839 840 841/* Free assoc codes */ 842#define SCTP_NORMAL_PROC 0 843#define SCTP_PCBFREE_NOFORCE 1 844#define SCTP_PCBFREE_FORCE 2 845 846/* From codes for adding addresses */ 847#define SCTP_ADDR_IS_CONFIRMED 8 848#define SCTP_ADDR_DYNAMIC_ADDED 6 849#define SCTP_IN_COOKIE_PROC 100 850#define SCTP_ALLOC_ASOC 1 851#define SCTP_LOAD_ADDR_2 2 852#define SCTP_LOAD_ADDR_3 3 853#define SCTP_LOAD_ADDR_4 4 854#define SCTP_LOAD_ADDR_5 5 855 856#define SCTP_DONOT_SETSCOPE 0 857#define SCTP_DO_SETSCOPE 1 858 859 860/* This value determines the default for when 861 * we try to add more on the send queue., if 862 * there is room. This prevents us from cycling 863 * into the copy_resume routine to often if 864 * we have not got enough space to add a decent 865 * enough size message. Note that if we have enough 866 * space to complete the message copy we will always 867 * add to the message, no matter what the size. Its 868 * only when we reach the point that we have some left 869 * to add, there is only room for part of it that we 870 * will use this threshold. Its also a sysctl. 871 */ 872#define SCTP_DEFAULT_ADD_MORE 1452 873 874#ifndef SCTP_PCBHASHSIZE 875/* default number of association hash buckets in each endpoint */ 876#define SCTP_PCBHASHSIZE 256 877#endif 878#ifndef SCTP_TCBHASHSIZE 879#define SCTP_TCBHASHSIZE 1024 880#endif 881 882#ifndef SCTP_CHUNKQUEUE_SCALE 883#define SCTP_CHUNKQUEUE_SCALE 10 884#endif 885 886/* clock variance is 1 ms */ 887#define SCTP_CLOCK_GRANULARITY 1 888#define IP_HDR_SIZE 40 /* we use the size of a IP6 header here this 889 * detracts a small amount for ipv4 but it 890 * simplifies the ipv6 addition */ 891 892/* Argument magic number for sctp_inpcb_free() */ 893 894/* third argument */ 895#define SCTP_CALLED_DIRECTLY_NOCMPSET 0 896#define SCTP_CALLED_AFTER_CMPSET_OFCLOSE 1 897 898/* second argument */ 899#define SCTP_FREE_SHOULD_USE_ABORT 1 900#define SCTP_FREE_SHOULD_USE_GRACEFUL_CLOSE 0 901 902#ifndef IPPROTO_SCTP 903#define IPPROTO_SCTP 132 /* the Official IANA number :-) */ 904#endif /* !IPPROTO_SCTP */ 905 906#define SCTP_MAX_DATA_BUNDLING 256 907 908/* modular comparison */ 909/* True if a > b (mod = M) */ 910#define compare_with_wrap(a, b, M) (((a > b) && ((a - b) < ((M >> 1) + 1))) || \ 911 ((b > a) && ((b - a) > ((M >> 1) + 1)))) 912 913 914/* Mapping array manipulation routines */ 915#define SCTP_IS_TSN_PRESENT(arry, gap) ((arry[(gap >> 3)] >> (gap & 0x07)) & 0x01) 916#define SCTP_SET_TSN_PRESENT(arry, gap) (arry[(gap >> 3)] |= (0x01 << ((gap & 0x07)))) 917#define SCTP_UNSET_TSN_PRESENT(arry, gap) (arry[(gap >> 3)] &= ((~(0x01 << ((gap & 0x07)))) & 0xff)) 918#define SCTP_CALC_TSN_TO_GAP(gap, tsn, mapping_tsn) do { \ 919 if (tsn >= mapping_tsn) { \ 920 gap = tsn - mapping_tsn; \ 921 } else { \ 922 gap = (MAX_TSN - mapping_tsn) + tsn + 1; \ 923 } \ 924 } while(0) 925 926 927#define SCTP_RETRAN_DONE -1 928#define SCTP_RETRAN_EXIT -2 929 930/* 931 * This value defines the number of vtag block time wait entry's per list 932 * element. Each entry will take 2 4 byte ints (and of course the overhead 933 * of the next pointer as well). Using 15 as an example will yield * ((8 * 934 * 15) + 8) or 128 bytes of overhead for each timewait block that gets 935 * initialized. Increasing it to 31 would yeild 256 bytes per block. 936 */ 937#define SCTP_NUMBER_IN_VTAG_BLOCK 15 938/* 939 * If we use the STACK option, we have an array of this size head pointers. 940 * This array is mod'd the with the size to find which bucket and then all 941 * entries must be searched to see if the tag is in timed wait. If so we 942 * reject it. 943 */ 944#define SCTP_STACK_VTAG_HASH_SIZE 32 945 946/* 947 * Number of seconds of time wait for a vtag. 948 */ 949#define SCTP_TIME_WAIT 60 950 951/* The system retains a cache of free chunks such to 952 * cut down on calls the memory allocation system. There 953 * is a per association limit of free items and a overall 954 * system limit. If either one gets hit then the resource 955 * stops being cached. 956 */ 957 958#define SCTP_DEF_ASOC_RESC_LIMIT 10 959#define SCTP_DEF_SYSTEM_RESC_LIMIT 1000 960 961/*- 962 * defines for socket lock states. 963 * Used by __APPLE__ and SCTP_SO_LOCK_TESTING 964 */ 965#define SCTP_SO_LOCKED 1 966#define SCTP_SO_NOT_LOCKED 0 967 968 969#define SCTP_HOLDS_LOCK 1 970#define SCTP_NOT_LOCKED 0 971 972/*- 973 * For address locks, do we hold the lock? 974 */ 975#define SCTP_ADDR_LOCKED 1 976#define SCTP_ADDR_NOT_LOCKED 0 977 978#define IN4_ISPRIVATE_ADDRESS(a) \ 979 ((((uint8_t *)&(a)->s_addr)[0] == 10) || \ 980 ((((uint8_t *)&(a)->s_addr)[0] == 172) && \ 981 (((uint8_t *)&(a)->s_addr)[1] >= 16) && \ 982 (((uint8_t *)&(a)->s_addr)[1] <= 32)) || \ 983 ((((uint8_t *)&(a)->s_addr)[0] == 192) && \ 984 (((uint8_t *)&(a)->s_addr)[1] == 168))) 985 986#define IN4_ISLOOPBACK_ADDRESS(a) \ 987 ((((uint8_t *)&(a)->s_addr)[0] == 127) && \ 988 (((uint8_t *)&(a)->s_addr)[1] == 0) && \ 989 (((uint8_t *)&(a)->s_addr)[2] == 0) && \ 990 (((uint8_t *)&(a)->s_addr)[3] == 1)) 991 992 993#if defined(_KERNEL) 994 995#define SCTP_GETTIME_TIMEVAL(x) (getmicrouptime(x)) 996#define SCTP_GETPTIME_TIMEVAL(x) (microuptime(x)) 997#endif 998/*#if defined(__FreeBSD__) || defined(__APPLE__)*/ 999/*#define SCTP_GETTIME_TIMEVAL(x) { \*/ 1000/* (x)->tv_sec = ticks / 1000; \*/ 1001/* (x)->tv_usec = (ticks % 1000) * 1000; \*/ 1002/*}*/ 1003 1004/*#else*/ 1005/*#define SCTP_GETTIME_TIMEVAL(x) (microtime(x))*/ 1006/*#endif __FreeBSD__ */ 1007 1008#if defined(_KERNEL) || defined(__Userspace__) 1009#define sctp_sowwakeup(inp, so) \ 1010do { \ 1011 if (inp->sctp_flags & SCTP_PCB_FLAGS_DONT_WAKE) { \ 1012 inp->sctp_flags |= SCTP_PCB_FLAGS_WAKEOUTPUT; \ 1013 } else { \ 1014 sowwakeup(so); \ 1015 } \ 1016} while (0) 1017 1018#define sctp_sowwakeup_locked(inp, so) \ 1019do { \ 1020 if (inp->sctp_flags & SCTP_PCB_FLAGS_DONT_WAKE) { \ 1021 SOCKBUF_UNLOCK(&((so)->so_snd)); \ 1022 inp->sctp_flags |= SCTP_PCB_FLAGS_WAKEOUTPUT; \ 1023 } else { \ 1024 sowwakeup_locked(so); \ 1025 } \ 1026} while (0) 1027 1028#define sctp_sorwakeup(inp, so) \ 1029do { \ 1030 if (inp->sctp_flags & SCTP_PCB_FLAGS_DONT_WAKE) { \ 1031 inp->sctp_flags |= SCTP_PCB_FLAGS_WAKEINPUT; \ 1032 } else { \ 1033 sorwakeup(so); \ 1034 } \ 1035} while (0) 1036 1037#define sctp_sorwakeup_locked(inp, so) \ 1038do { \ 1039 if (inp->sctp_flags & SCTP_PCB_FLAGS_DONT_WAKE) { \ 1040 inp->sctp_flags |= SCTP_PCB_FLAGS_WAKEINPUT; \ 1041 SOCKBUF_UNLOCK(&((so)->so_rcv)); \ 1042 } else { \ 1043 sorwakeup_locked(so); \ 1044 } \ 1045} while (0) 1046 1047#endif /* _KERNEL || __Userspace__ */ 1048#endif
|