1/*- 2 * Copyright (c) 2001 Atsushi Onoe 3 * Copyright (c) 2002-2008 Sam Leffler, Errno Consulting 4 * All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 16 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 17 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 18 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 19 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 20 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 21 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 22 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 23 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 24 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 25 *
|
26 * $FreeBSD: head/sys/net80211/_ieee80211.h 288245 2015-09-26 00:53:37Z adrian $
|
26 * $FreeBSD: head/sys/net80211/_ieee80211.h 298818 2016-04-29 22:14:11Z avos $ |
27 */ 28#ifndef _NET80211__IEEE80211_H_ 29#define _NET80211__IEEE80211_H_ 30 31/* 32 * 802.11 implementation definitions. 33 * 34 * NB: this file is used by applications. 35 */ 36 37/* 38 * PHY type; mostly used to identify FH phys. 39 */ 40enum ieee80211_phytype { 41 IEEE80211_T_DS, /* direct sequence spread spectrum */ 42 IEEE80211_T_FH, /* frequency hopping */ 43 IEEE80211_T_OFDM, /* frequency division multiplexing */ 44 IEEE80211_T_TURBO, /* high rate OFDM, aka turbo mode */ 45 IEEE80211_T_HT, /* high throughput */ 46 IEEE80211_T_OFDM_HALF, /* 1/2 rate OFDM */ 47 IEEE80211_T_OFDM_QUARTER, /* 1/4 rate OFDM */ 48}; 49#define IEEE80211_T_CCK IEEE80211_T_DS /* more common nomenclature */ 50 51/* 52 * PHY mode; this is not really a mode as multi-mode devices 53 * have multiple PHY's. Mode is mostly used as a shorthand 54 * for constraining which channels to consider in setting up 55 * operation. Modes used to be used more extensively when 56 * channels were identified as IEEE channel numbers. 57 */ 58enum ieee80211_phymode { 59 IEEE80211_MODE_AUTO = 0, /* autoselect */ 60 IEEE80211_MODE_11A = 1, /* 5GHz, OFDM */ 61 IEEE80211_MODE_11B = 2, /* 2GHz, CCK */ 62 IEEE80211_MODE_11G = 3, /* 2GHz, OFDM */ 63 IEEE80211_MODE_FH = 4, /* 2GHz, GFSK */ 64 IEEE80211_MODE_TURBO_A = 5, /* 5GHz, OFDM, 2x clock */ 65 IEEE80211_MODE_TURBO_G = 6, /* 2GHz, OFDM, 2x clock */ 66 IEEE80211_MODE_STURBO_A = 7, /* 5GHz, OFDM, 2x clock, static */ 67 IEEE80211_MODE_11NA = 8, /* 5GHz, w/ HT */ 68 IEEE80211_MODE_11NG = 9, /* 2GHz, w/ HT */ 69 IEEE80211_MODE_HALF = 10, /* OFDM, 1/2x clock */ 70 IEEE80211_MODE_QUARTER = 11, /* OFDM, 1/4x clock */ 71}; 72#define IEEE80211_MODE_MAX (IEEE80211_MODE_QUARTER+1)
|
73#define IEEE80211_MODE_BYTES 2 /* howmany(IEEE80211_MODE_MAX, NBBY) */ |
74 75/* 76 * Operating mode. Devices do not necessarily support 77 * all modes; they indicate which are supported in their 78 * capabilities. 79 */ 80enum ieee80211_opmode { 81 IEEE80211_M_IBSS = 0, /* IBSS (adhoc) station */ 82 IEEE80211_M_STA = 1, /* infrastructure station */ 83 IEEE80211_M_WDS = 2, /* WDS link */ 84 IEEE80211_M_AHDEMO = 3, /* Old lucent compatible adhoc demo */ 85 IEEE80211_M_HOSTAP = 4, /* Software Access Point */ 86 IEEE80211_M_MONITOR = 5, /* Monitor mode */ 87 IEEE80211_M_MBSS = 6, /* MBSS (Mesh Point) link */ 88}; 89#define IEEE80211_OPMODE_MAX (IEEE80211_M_MBSS+1) 90 91/* 92 * 802.11g/802.11n protection mode. 93 */ 94enum ieee80211_protmode { 95 IEEE80211_PROT_NONE = 0, /* no protection */ 96 IEEE80211_PROT_CTSONLY = 1, /* CTS to self */ 97 IEEE80211_PROT_RTSCTS = 2, /* RTS-CTS */ 98}; 99 100/* 101 * Authentication mode. The open and shared key authentication 102 * modes are implemented within the 802.11 layer. 802.1x and 103 * WPA/802.11i are implemented in user mode by setting the 104 * 802.11 layer into IEEE80211_AUTH_8021X and deferring 105 * authentication to user space programs. 106 */ 107enum ieee80211_authmode { 108 IEEE80211_AUTH_NONE = 0, 109 IEEE80211_AUTH_OPEN = 1, /* open */ 110 IEEE80211_AUTH_SHARED = 2, /* shared-key */ 111 IEEE80211_AUTH_8021X = 3, /* 802.1x */ 112 IEEE80211_AUTH_AUTO = 4, /* auto-select/accept */ 113 /* NB: these are used only for ioctls */ 114 IEEE80211_AUTH_WPA = 5, /* WPA/RSN w/ 802.1x/PSK */ 115}; 116 117/* 118 * Roaming mode is effectively who controls the operation 119 * of the 802.11 state machine when operating as a station. 120 * State transitions are controlled either by the driver 121 * (typically when management frames are processed by the 122 * hardware/firmware), the host (auto/normal operation of 123 * the 802.11 layer), or explicitly through ioctl requests 124 * when applications like wpa_supplicant want control. 125 */ 126enum ieee80211_roamingmode { 127 IEEE80211_ROAMING_DEVICE= 0, /* driver/hardware control */ 128 IEEE80211_ROAMING_AUTO = 1, /* 802.11 layer control */ 129 IEEE80211_ROAMING_MANUAL= 2, /* application control */ 130}; 131 132/* 133 * Channels are specified by frequency and attributes. 134 */ 135struct ieee80211_channel { 136 uint32_t ic_flags; /* see below */ 137 uint16_t ic_freq; /* setting in MHz */ 138 uint8_t ic_ieee; /* IEEE channel number */ 139 int8_t ic_maxregpower; /* maximum regulatory tx power in dBm */ 140 int8_t ic_maxpower; /* maximum tx power in .5 dBm */ 141 int8_t ic_minpower; /* minimum tx power in .5 dBm */ 142 uint8_t ic_state; /* dynamic state */ 143 uint8_t ic_extieee; /* HT40 extension channel number */ 144 int8_t ic_maxantgain; /* maximum antenna gain in .5 dBm */ 145 uint8_t ic_pad; 146 uint16_t ic_devdata; /* opaque device/driver data */ 147}; 148 149#define IEEE80211_CHAN_MAX 256 150#define IEEE80211_CHAN_BYTES 32 /* howmany(IEEE80211_CHAN_MAX, NBBY) */ 151#define IEEE80211_CHAN_ANY 0xffff /* token for ``any channel'' */ 152#define IEEE80211_CHAN_ANYC \ 153 ((struct ieee80211_channel *) IEEE80211_CHAN_ANY) 154 155/* channel attributes */ 156#define IEEE80211_CHAN_PRIV0 0x00000001 /* driver private bit 0 */ 157#define IEEE80211_CHAN_PRIV1 0x00000002 /* driver private bit 1 */ 158#define IEEE80211_CHAN_PRIV2 0x00000004 /* driver private bit 2 */ 159#define IEEE80211_CHAN_PRIV3 0x00000008 /* driver private bit 3 */ 160#define IEEE80211_CHAN_TURBO 0x00000010 /* Turbo channel */ 161#define IEEE80211_CHAN_CCK 0x00000020 /* CCK channel */ 162#define IEEE80211_CHAN_OFDM 0x00000040 /* OFDM channel */ 163#define IEEE80211_CHAN_2GHZ 0x00000080 /* 2 GHz spectrum channel. */ 164#define IEEE80211_CHAN_5GHZ 0x00000100 /* 5 GHz spectrum channel */ 165#define IEEE80211_CHAN_PASSIVE 0x00000200 /* Only passive scan allowed */ 166#define IEEE80211_CHAN_DYN 0x00000400 /* Dynamic CCK-OFDM channel */ 167#define IEEE80211_CHAN_GFSK 0x00000800 /* GFSK channel (FHSS PHY) */ 168#define IEEE80211_CHAN_GSM 0x00001000 /* 900 MHz spectrum channel */ 169#define IEEE80211_CHAN_STURBO 0x00002000 /* 11a static turbo channel only */ 170#define IEEE80211_CHAN_HALF 0x00004000 /* Half rate channel */ 171#define IEEE80211_CHAN_QUARTER 0x00008000 /* Quarter rate channel */ 172#define IEEE80211_CHAN_HT20 0x00010000 /* HT 20 channel */ 173#define IEEE80211_CHAN_HT40U 0x00020000 /* HT 40 channel w/ ext above */ 174#define IEEE80211_CHAN_HT40D 0x00040000 /* HT 40 channel w/ ext below */ 175#define IEEE80211_CHAN_DFS 0x00080000 /* DFS required */ 176#define IEEE80211_CHAN_4MSXMIT 0x00100000 /* 4ms limit on frame length */ 177#define IEEE80211_CHAN_NOADHOC 0x00200000 /* adhoc mode not allowed */ 178#define IEEE80211_CHAN_NOHOSTAP 0x00400000 /* hostap mode not allowed */ 179#define IEEE80211_CHAN_11D 0x00800000 /* 802.11d required */ 180 181#define IEEE80211_CHAN_HT40 (IEEE80211_CHAN_HT40U | IEEE80211_CHAN_HT40D) 182#define IEEE80211_CHAN_HT (IEEE80211_CHAN_HT20 | IEEE80211_CHAN_HT40) 183 184#define IEEE80211_CHAN_BITS \ 185 "\20\1PRIV0\2PRIV2\3PRIV3\4PRIV4\5TURBO\6CCK\7OFDM\0102GHZ\0115GHZ" \ 186 "\12PASSIVE\13DYN\14GFSK\15GSM\16STURBO\17HALF\20QUARTER\21HT20" \ 187 "\22HT40U\23HT40D\24DFS\0254MSXMIT\26NOADHOC\27NOHOSTAP\03011D" 188 189/* 190 * Useful combinations of channel characteristics. 191 */ 192#define IEEE80211_CHAN_FHSS \ 193 (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_GFSK) 194#define IEEE80211_CHAN_A \ 195 (IEEE80211_CHAN_5GHZ | IEEE80211_CHAN_OFDM) 196#define IEEE80211_CHAN_B \ 197 (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_CCK) 198#define IEEE80211_CHAN_PUREG \ 199 (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_OFDM) 200#define IEEE80211_CHAN_G \ 201 (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_DYN) 202#define IEEE80211_CHAN_108A \ 203 (IEEE80211_CHAN_A | IEEE80211_CHAN_TURBO) 204#define IEEE80211_CHAN_108G \ 205 (IEEE80211_CHAN_PUREG | IEEE80211_CHAN_TURBO) 206#define IEEE80211_CHAN_ST \ 207 (IEEE80211_CHAN_108A | IEEE80211_CHAN_STURBO) 208 209#define IEEE80211_CHAN_ALL \ 210 (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_5GHZ | IEEE80211_CHAN_GFSK | \ 211 IEEE80211_CHAN_CCK | IEEE80211_CHAN_OFDM | IEEE80211_CHAN_DYN | \ 212 IEEE80211_CHAN_HALF | IEEE80211_CHAN_QUARTER | \ 213 IEEE80211_CHAN_HT) 214#define IEEE80211_CHAN_ALLTURBO \ 215 (IEEE80211_CHAN_ALL | IEEE80211_CHAN_TURBO | IEEE80211_CHAN_STURBO) 216 217#define IEEE80211_IS_CHAN_FHSS(_c) \ 218 (((_c)->ic_flags & IEEE80211_CHAN_FHSS) == IEEE80211_CHAN_FHSS) 219#define IEEE80211_IS_CHAN_A(_c) \ 220 (((_c)->ic_flags & IEEE80211_CHAN_A) == IEEE80211_CHAN_A) 221#define IEEE80211_IS_CHAN_B(_c) \ 222 (((_c)->ic_flags & IEEE80211_CHAN_B) == IEEE80211_CHAN_B) 223#define IEEE80211_IS_CHAN_PUREG(_c) \ 224 (((_c)->ic_flags & IEEE80211_CHAN_PUREG) == IEEE80211_CHAN_PUREG) 225#define IEEE80211_IS_CHAN_G(_c) \ 226 (((_c)->ic_flags & IEEE80211_CHAN_G) == IEEE80211_CHAN_G) 227#define IEEE80211_IS_CHAN_ANYG(_c) \ 228 (IEEE80211_IS_CHAN_PUREG(_c) || IEEE80211_IS_CHAN_G(_c)) 229#define IEEE80211_IS_CHAN_ST(_c) \ 230 (((_c)->ic_flags & IEEE80211_CHAN_ST) == IEEE80211_CHAN_ST) 231#define IEEE80211_IS_CHAN_108A(_c) \ 232 (((_c)->ic_flags & IEEE80211_CHAN_108A) == IEEE80211_CHAN_108A) 233#define IEEE80211_IS_CHAN_108G(_c) \ 234 (((_c)->ic_flags & IEEE80211_CHAN_108G) == IEEE80211_CHAN_108G) 235 236#define IEEE80211_IS_CHAN_2GHZ(_c) \ 237 (((_c)->ic_flags & IEEE80211_CHAN_2GHZ) != 0) 238#define IEEE80211_IS_CHAN_5GHZ(_c) \ 239 (((_c)->ic_flags & IEEE80211_CHAN_5GHZ) != 0) 240#define IEEE80211_IS_CHAN_PASSIVE(_c) \ 241 (((_c)->ic_flags & IEEE80211_CHAN_PASSIVE) != 0) 242#define IEEE80211_IS_CHAN_OFDM(_c) \ 243 (((_c)->ic_flags & (IEEE80211_CHAN_OFDM | IEEE80211_CHAN_DYN)) != 0) 244#define IEEE80211_IS_CHAN_CCK(_c) \ 245 (((_c)->ic_flags & (IEEE80211_CHAN_CCK | IEEE80211_CHAN_DYN)) != 0) 246#define IEEE80211_IS_CHAN_DYN(_c) \ 247 (((_c)->ic_flags & IEEE80211_CHAN_DYN) == IEEE80211_CHAN_DYN) 248#define IEEE80211_IS_CHAN_GFSK(_c) \ 249 (((_c)->ic_flags & IEEE80211_CHAN_GFSK) != 0) 250#define IEEE80211_IS_CHAN_TURBO(_c) \ 251 (((_c)->ic_flags & IEEE80211_CHAN_TURBO) != 0) 252#define IEEE80211_IS_CHAN_STURBO(_c) \ 253 (((_c)->ic_flags & IEEE80211_CHAN_STURBO) != 0) 254#define IEEE80211_IS_CHAN_DTURBO(_c) \ 255 (((_c)->ic_flags & \ 256 (IEEE80211_CHAN_TURBO | IEEE80211_CHAN_STURBO)) == IEEE80211_CHAN_TURBO) 257#define IEEE80211_IS_CHAN_HALF(_c) \ 258 (((_c)->ic_flags & IEEE80211_CHAN_HALF) != 0) 259#define IEEE80211_IS_CHAN_QUARTER(_c) \ 260 (((_c)->ic_flags & IEEE80211_CHAN_QUARTER) != 0) 261#define IEEE80211_IS_CHAN_FULL(_c) \ 262 (((_c)->ic_flags & (IEEE80211_CHAN_QUARTER | IEEE80211_CHAN_HALF)) == 0) 263#define IEEE80211_IS_CHAN_GSM(_c) \ 264 (((_c)->ic_flags & IEEE80211_CHAN_GSM) != 0) 265#define IEEE80211_IS_CHAN_HT(_c) \ 266 (((_c)->ic_flags & IEEE80211_CHAN_HT) != 0) 267#define IEEE80211_IS_CHAN_HT20(_c) \ 268 (((_c)->ic_flags & IEEE80211_CHAN_HT20) != 0) 269#define IEEE80211_IS_CHAN_HT40(_c) \ 270 (((_c)->ic_flags & IEEE80211_CHAN_HT40) != 0) 271#define IEEE80211_IS_CHAN_HT40U(_c) \ 272 (((_c)->ic_flags & IEEE80211_CHAN_HT40U) != 0) 273#define IEEE80211_IS_CHAN_HT40D(_c) \ 274 (((_c)->ic_flags & IEEE80211_CHAN_HT40D) != 0) 275#define IEEE80211_IS_CHAN_HTA(_c) \ 276 (IEEE80211_IS_CHAN_5GHZ(_c) && \ 277 ((_c)->ic_flags & IEEE80211_CHAN_HT) != 0) 278#define IEEE80211_IS_CHAN_HTG(_c) \ 279 (IEEE80211_IS_CHAN_2GHZ(_c) && \ 280 ((_c)->ic_flags & IEEE80211_CHAN_HT) != 0) 281#define IEEE80211_IS_CHAN_DFS(_c) \ 282 (((_c)->ic_flags & IEEE80211_CHAN_DFS) != 0) 283#define IEEE80211_IS_CHAN_NOADHOC(_c) \ 284 (((_c)->ic_flags & IEEE80211_CHAN_NOADHOC) != 0) 285#define IEEE80211_IS_CHAN_NOHOSTAP(_c) \ 286 (((_c)->ic_flags & IEEE80211_CHAN_NOHOSTAP) != 0) 287#define IEEE80211_IS_CHAN_11D(_c) \ 288 (((_c)->ic_flags & IEEE80211_CHAN_11D) != 0) 289 290#define IEEE80211_CHAN2IEEE(_c) (_c)->ic_ieee 291 292/* dynamic state */ 293#define IEEE80211_CHANSTATE_RADAR 0x01 /* radar detected */ 294#define IEEE80211_CHANSTATE_CACDONE 0x02 /* CAC completed */ 295#define IEEE80211_CHANSTATE_CWINT 0x04 /* interference detected */ 296#define IEEE80211_CHANSTATE_NORADAR 0x10 /* post notify on radar clear */ 297 298#define IEEE80211_IS_CHAN_RADAR(_c) \ 299 (((_c)->ic_state & IEEE80211_CHANSTATE_RADAR) != 0) 300#define IEEE80211_IS_CHAN_CACDONE(_c) \ 301 (((_c)->ic_state & IEEE80211_CHANSTATE_CACDONE) != 0) 302#define IEEE80211_IS_CHAN_CWINT(_c) \ 303 (((_c)->ic_state & IEEE80211_CHANSTATE_CWINT) != 0) 304 305/* ni_chan encoding for FH phy */ 306#define IEEE80211_FH_CHANMOD 80 307#define IEEE80211_FH_CHAN(set,pat) (((set)-1)*IEEE80211_FH_CHANMOD+(pat)) 308#define IEEE80211_FH_CHANSET(chan) ((chan)/IEEE80211_FH_CHANMOD+1) 309#define IEEE80211_FH_CHANPAT(chan) ((chan)%IEEE80211_FH_CHANMOD) 310 311#define IEEE80211_TID_SIZE (WME_NUM_TID+1) /* WME TID's +1 for non-QoS */ 312#define IEEE80211_NONQOS_TID WME_NUM_TID /* index for non-QoS sta */ 313 314/* 315 * The 802.11 spec says at most 2007 stations may be 316 * associated at once. For most AP's this is way more 317 * than is feasible so we use a default of 128. This 318 * number may be overridden by the driver and/or by 319 * user configuration but may not be less than IEEE80211_AID_MIN. 320 */ 321#define IEEE80211_AID_DEF 128 322#define IEEE80211_AID_MIN 16 323 324/* 325 * 802.11 rate set. 326 */ 327#define IEEE80211_RATE_SIZE 8 /* 802.11 standard */ 328#define IEEE80211_RATE_MAXSIZE 15 /* max rates we'll handle */ 329 330struct ieee80211_rateset { 331 uint8_t rs_nrates; 332 uint8_t rs_rates[IEEE80211_RATE_MAXSIZE]; 333}; 334 335/* 336 * 802.11n variant of ieee80211_rateset. Instead of 337 * legacy rates the entries are MCS rates. We define 338 * the structure such that it can be used interchangeably 339 * with an ieee80211_rateset (modulo structure size). 340 */ 341#define IEEE80211_HTRATE_MAXSIZE 77 342 343struct ieee80211_htrateset { 344 uint8_t rs_nrates; 345 uint8_t rs_rates[IEEE80211_HTRATE_MAXSIZE]; 346}; 347 348#define IEEE80211_RATE_MCS 0x80 349 350/* 351 * Per-mode transmit parameters/controls visible to user space. 352 * These can be used to set fixed transmit rate for all operating 353 * modes or on a per-client basis according to the capabilities 354 * of the client (e.g. an 11b client associated to an 11g ap). 355 * 356 * MCS are distinguished from legacy rates by or'ing in 0x80. 357 */ 358struct ieee80211_txparam { 359 uint8_t ucastrate; /* ucast data rate (legacy/MCS|0x80) */ 360 uint8_t mgmtrate; /* mgmt frame rate (legacy/MCS|0x80) */ 361 uint8_t mcastrate; /* multicast rate (legacy/MCS|0x80) */ 362 uint8_t maxretry; /* max unicast data retry count */ 363}; 364 365/* 366 * Per-mode roaming state visible to user space. There are two 367 * thresholds that control whether roaming is considered; when 368 * either is exceeded the 802.11 layer will check the scan cache 369 * for another AP. If the cache is stale then a scan may be 370 * triggered. 371 */ 372struct ieee80211_roamparam { 373 int8_t rssi; /* rssi thresh (.5 dBm) */ 374 uint8_t rate; /* tx rate thresh (.5 Mb/s or MCS) */ 375 uint16_t pad; /* reserve */ 376}; 377 378/* 379 * Regulatory Information. 380 */ 381struct ieee80211_regdomain { 382 uint16_t regdomain; /* SKU */ 383 uint16_t country; /* ISO country code */ 384 uint8_t location; /* I (indoor), O (outdoor), other */ 385 uint8_t ecm; /* Extended Channel Mode */ 386 char isocc[2]; /* country code string */ 387 short pad[2]; 388}; 389 390/* 391 * MIMO antenna/radio state. 392 */ 393 394/* 395 * XXX This doesn't yet export both ctl/ext chain details 396 * XXX TODO: IEEE80211_MAX_CHAINS is defined in _freebsd.h, not here; 397 * figure out how to pull it in! 398 */ 399struct ieee80211_mimo_info { 400 int8_t rssi[3]; /* per-antenna rssi */ 401 int8_t noise[3]; /* per-antenna noise floor */ 402 uint8_t pad[2]; 403 uint32_t evm[3]; /* EVM data */ 404}; 405#endif /* _NET80211__IEEE80211_H_ */
|