1/*-
2 * Copyright (c) 2006-2007 Bruce M. Simpson.
3 * Copyright (c) 2003-2004 Juli Mallett.
4 * All rights reserved.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
8 * are met:
9 * 1. Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * 2. Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
14 *
15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
16 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
17 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
18 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
19 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
20 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
21 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
22 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
23 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
24 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
25 * SUCH DAMAGE.
26 */
27
28/*
29 * Simple driver for the 32-bit interval counter built in to all
30 * MIPS32 CPUs.
31 */
32
33#include <sys/cdefs.h>
34__FBSDID("$FreeBSD: head/sys/mips/rmi/tick.c 215701 2010-11-22 19:32:54Z dim $");
35
36#include "opt_cputype.h"
37
38#include <sys/param.h>
39#include <sys/systm.h>
40#include <sys/sysctl.h>
41#include <sys/bus.h>
42#include <sys/kernel.h>
43#include <sys/module.h>
44#include <sys/rman.h>
45#include <sys/power.h>
46#include <sys/smp.h>
47#include <sys/time.h>
48#include <sys/timeet.h>
49#include <sys/timetc.h>
50
51#include <machine/hwfunc.h>
52#include <machine/clock.h>
53#include <machine/locore.h>
54#include <machine/md_var.h>
55#include <machine/intr_machdep.h>
56#include <mips/rmi/interrupt.h>
57
58uint64_t counter_freq;
59
60struct timecounter *platform_timecounter;
61
62static DPCPU_DEFINE(uint32_t, cycles_per_tick);
63static uint32_t cycles_per_usec;
64
65static DPCPU_DEFINE(volatile uint32_t, counter_upper);
66static DPCPU_DEFINE(volatile uint32_t, counter_lower_last);
67static DPCPU_DEFINE(uint32_t, compare_ticks);
68static DPCPU_DEFINE(uint32_t, lost_ticks);
69
70struct clock_softc {
71 int intr_rid;
72 struct resource *intr_res;
73 void *intr_handler;
74 struct timecounter tc;
75 struct eventtimer et;
76};
77static struct clock_softc *softc;
78
79/*
80 * Device methods
81 */
82static int clock_probe(device_t);
83static void clock_identify(driver_t *, device_t);
84static int clock_attach(device_t);
85static unsigned counter_get_timecount(struct timecounter *tc);
86
87void
88mips_timer_early_init(uint64_t clock_hz)
89{
90 /* Initialize clock early so that we can use DELAY sooner */
91 counter_freq = clock_hz;
92 cycles_per_usec = (clock_hz / (1000 * 1000));
93}
94
95void
96platform_initclocks(void)
97{
98
99 if (platform_timecounter != NULL)
100 tc_init(platform_timecounter);
101}
102
103static uint64_t
104tick_ticker(void)
105{
106 uint64_t ret;
107 uint32_t ticktock;
108 uint32_t t_lower_last, t_upper;
109
110 /*
111 * Disable preemption because we are working with cpu specific data.
112 */
113 critical_enter();
114
115 /*
116 * Note that even though preemption is disabled, interrupts are
117 * still enabled. In particular there is a race with clock_intr()
118 * reading the values of 'counter_upper' and 'counter_lower_last'.
119 *
120 * XXX this depends on clock_intr() being executed periodically
121 * so that 'counter_upper' and 'counter_lower_last' are not stale.
122 */
123 do {
124 t_upper = DPCPU_GET(counter_upper);
125 t_lower_last = DPCPU_GET(counter_lower_last);
126 } while (t_upper != DPCPU_GET(counter_upper));
127
128 ticktock = mips_rd_count();
129
130 critical_exit();
131
132 /* COUNT register wrapped around */
133 if (ticktock < t_lower_last)
134 t_upper++;
135
136 ret = ((uint64_t)t_upper << 32) | ticktock;
137 return (ret);
138}
139
140void
141mips_timer_init_params(uint64_t platform_counter_freq, int double_count)
142{
143
144 /*
145 * XXX: Do not use printf here: uart code 8250 may use DELAY so this
146 * function should be called before cninit.
147 */
148 counter_freq = platform_counter_freq;
149 /*
150 * XXX: Some MIPS32 cores update the Count register only every two
151 * pipeline cycles.
152 * We know this because of status registers in CP0, make it automatic.
153 */
154 if (double_count != 0)
155 counter_freq /= 2;
156
157 cycles_per_usec = counter_freq / (1 * 1000 * 1000);
158 set_cputicker(tick_ticker, counter_freq, 1);
159}
160
161static int
162sysctl_machdep_counter_freq(SYSCTL_HANDLER_ARGS)
163{
164 int error;
165 uint64_t freq;
166
167 if (softc == NULL)
168 return (EOPNOTSUPP);
169 freq = counter_freq;
170 error = sysctl_handle_int(oidp, &freq, sizeof(freq), req);
171 if (error == 0 && req->newptr != NULL) {
172 counter_freq = freq;
173 softc->et.et_frequency = counter_freq;
174 softc->tc.tc_frequency = counter_freq;
175 }
176 return (error);
177}
178
179SYSCTL_PROC(_machdep, OID_AUTO, counter_freq, CTLTYPE_QUAD | CTLFLAG_RW,
180 0, sizeof(u_int), sysctl_machdep_counter_freq, "IU",
181 "Timecounter frequency in Hz");
182
183static unsigned
184counter_get_timecount(struct timecounter *tc)
185{
186
187 return (mips_rd_count());
188}
189
190/*
191 * Wait for about n microseconds (at least!).
192 */
193void
194DELAY(int n)
195{
196 uint32_t cur, last, delta, usecs;
197
198 /*
199 * This works by polling the timer and counting the number of
200 * microseconds that go by.
201 */
202 last = mips_rd_count();
203 delta = usecs = 0;
204
205 while (n > usecs) {
206 cur = mips_rd_count();
207
208 /* Check to see if the timer has wrapped around. */
209 if (cur < last)
210 delta += cur + (0xffffffff - last) + 1;
211 else
212 delta += cur - last;
213
214 last = cur;
215
216 if (delta >= cycles_per_usec) {
217 usecs += delta / cycles_per_usec;
218 delta %= cycles_per_usec;
219 }
220 }
221}
222
223static int
224clock_start(struct eventtimer *et,
225 struct bintime *first, struct bintime *period)
226{
227 uint32_t fdiv, div, next;
228
229 if (period != NULL) {
230 div = (et->et_frequency * (period->frac >> 32)) >> 32;
231 if (period->sec != 0)
232 div += et->et_frequency * period->sec;
233 } else
234 div = 0;
235 if (first != NULL) {
236 fdiv = (et->et_frequency * (first->frac >> 32)) >> 32;
237 if (first->sec != 0)
238 fdiv += et->et_frequency * first->sec;
239 } else
240 fdiv = div;
241 DPCPU_SET(cycles_per_tick, div);
242 next = mips_rd_count() + fdiv;
243 DPCPU_SET(compare_ticks, next);
244 mips_wr_compare(next);
245 return (0);
246}
247
248static int
249clock_stop(struct eventtimer *et)
250{
251
252 DPCPU_SET(cycles_per_tick, 0);
253 mips_wr_compare(0xffffffff);
254 return (0);
255}
256
257/*
258 * Device section of file below
259 */
260static int
261clock_intr(void *arg)
262{
263 struct clock_softc *sc = (struct clock_softc *)arg;
264 uint32_t cycles_per_tick;
265 uint32_t count, compare_last, compare_next, lost_ticks;
266
267 cycles_per_tick = DPCPU_GET(cycles_per_tick);
268 /*
269 * Set next clock edge.
270 */
271 count = mips_rd_count();
272 compare_last = DPCPU_GET(compare_ticks);
273 if (cycles_per_tick > 0) {
274 compare_next = count + cycles_per_tick;
275 DPCPU_SET(compare_ticks, compare_next);
276 mips_wr_compare(compare_next);
277 } else /* In one-shot mode timer should be stopped after the event. */
278 mips_wr_compare(0xffffffff);
279
280 /* COUNT register wrapped around */
281 if (count < DPCPU_GET(counter_lower_last)) {
282 DPCPU_SET(counter_upper, DPCPU_GET(counter_upper) + 1);
283 }
284 DPCPU_SET(counter_lower_last, count);
285
286 if (cycles_per_tick > 0) {
287
288 /*
289 * Account for the "lost time" between when the timer interrupt
290 * fired and when 'clock_intr' actually started executing.
291 */
292 lost_ticks = DPCPU_GET(lost_ticks);
293 lost_ticks += count - compare_last;
294
295 /*
296 * If the COUNT and COMPARE registers are no longer in sync
297 * then make up some reasonable value for the 'lost_ticks'.
298 *
299 * This could happen, for e.g., after we resume normal
300 * operations after exiting the debugger.
301 */
302 if (lost_ticks > 2 * cycles_per_tick)
303 lost_ticks = cycles_per_tick;
304
305 while (lost_ticks >= cycles_per_tick) {
306 if (sc->et.et_active)
307 sc->et.et_event_cb(&sc->et, sc->et.et_arg);
308 lost_ticks -= cycles_per_tick;
309 }
310 DPCPU_SET(lost_ticks, lost_ticks);
311 }
312 if (sc->et.et_active)
313 sc->et.et_event_cb(&sc->et, sc->et.et_arg);
314 return (FILTER_HANDLED);
315}
316
317static int
318clock_probe(device_t dev)
319{
320
321 if (device_get_unit(dev) != 0)
322 panic("can't attach more clocks");
323
324 device_set_desc(dev, "Generic MIPS32 ticker");
325 return (0);
326}
327
328static void
329clock_identify(driver_t * drv, device_t parent)
330{
331
332 BUS_ADD_CHILD(parent, 0, "clock", 0);
333}
334
335static int
336clock_attach(device_t dev)
337{
338 struct clock_softc *sc;
339
340 softc = sc = device_get_softc(dev);
341 cpu_establish_hardintr("compare", clock_intr, NULL,
342 sc, IRQ_TIMER, INTR_TYPE_CLK, &sc->intr_handler);
343
344 sc->tc.tc_get_timecount = counter_get_timecount;
345 sc->tc.tc_counter_mask = 0xffffffff;
346 sc->tc.tc_frequency = counter_freq;
347 sc->tc.tc_name = "MIPS32";
348 sc->tc.tc_quality = 800;
349 sc->tc.tc_priv = sc;
350 tc_init(&sc->tc);
351 sc->et.et_name = "MIPS32";
352 sc->et.et_flags = ET_FLAGS_PERIODIC | ET_FLAGS_ONESHOT |
353 ET_FLAGS_PERCPU;
354 sc->et.et_quality = 800;
355 sc->et.et_frequency = counter_freq;
356 sc->et.et_min_period.sec = 0;
357 sc->et.et_min_period.frac = 0x00004000LLU << 32; /* To be safe. */
358 sc->et.et_max_period.sec = 0xfffffffeU / sc->et.et_frequency;
359 sc->et.et_max_period.frac =
360 ((0xfffffffeLLU << 32) / sc->et.et_frequency) << 32;
361 sc->et.et_start = clock_start;
362 sc->et.et_stop = clock_stop;
363 sc->et.et_priv = sc;
364 et_register(&sc->et);
365 return (0);
366}
367
368static device_method_t clock_methods[] = {
369 /* Device interface */
370 DEVMETHOD(device_probe, clock_probe),
371 DEVMETHOD(device_identify, clock_identify),
372 DEVMETHOD(device_attach, clock_attach),
373 DEVMETHOD(device_detach, bus_generic_detach),
374 DEVMETHOD(device_shutdown, bus_generic_shutdown),
375
376 {0, 0}
377};
378
379static driver_t clock_driver = {
380 "clock",
381 clock_methods,
382 sizeof(struct clock_softc),
383};
384
385static devclass_t clock_devclass;
386
387DRIVER_MODULE(clock, nexus, clock_driver, clock_devclass, 0, 0);
2 * Copyright (c) 2006-2007 Bruce M. Simpson.
3 * Copyright (c) 2003-2004 Juli Mallett.
4 * All rights reserved.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
8 * are met:
9 * 1. Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * 2. Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
14 *
15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
16 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
17 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
18 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
19 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
20 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
21 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
22 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
23 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
24 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
25 * SUCH DAMAGE.
26 */
27
28/*
29 * Simple driver for the 32-bit interval counter built in to all
30 * MIPS32 CPUs.
31 */
32
33#include <sys/cdefs.h>
34__FBSDID("$FreeBSD: head/sys/mips/rmi/tick.c 215701 2010-11-22 19:32:54Z dim $");
35
36#include "opt_cputype.h"
37
38#include <sys/param.h>
39#include <sys/systm.h>
40#include <sys/sysctl.h>
41#include <sys/bus.h>
42#include <sys/kernel.h>
43#include <sys/module.h>
44#include <sys/rman.h>
45#include <sys/power.h>
46#include <sys/smp.h>
47#include <sys/time.h>
48#include <sys/timeet.h>
49#include <sys/timetc.h>
50
51#include <machine/hwfunc.h>
52#include <machine/clock.h>
53#include <machine/locore.h>
54#include <machine/md_var.h>
55#include <machine/intr_machdep.h>
56#include <mips/rmi/interrupt.h>
57
58uint64_t counter_freq;
59
60struct timecounter *platform_timecounter;
61
62static DPCPU_DEFINE(uint32_t, cycles_per_tick);
63static uint32_t cycles_per_usec;
64
65static DPCPU_DEFINE(volatile uint32_t, counter_upper);
66static DPCPU_DEFINE(volatile uint32_t, counter_lower_last);
67static DPCPU_DEFINE(uint32_t, compare_ticks);
68static DPCPU_DEFINE(uint32_t, lost_ticks);
69
70struct clock_softc {
71 int intr_rid;
72 struct resource *intr_res;
73 void *intr_handler;
74 struct timecounter tc;
75 struct eventtimer et;
76};
77static struct clock_softc *softc;
78
79/*
80 * Device methods
81 */
82static int clock_probe(device_t);
83static void clock_identify(driver_t *, device_t);
84static int clock_attach(device_t);
85static unsigned counter_get_timecount(struct timecounter *tc);
86
87void
88mips_timer_early_init(uint64_t clock_hz)
89{
90 /* Initialize clock early so that we can use DELAY sooner */
91 counter_freq = clock_hz;
92 cycles_per_usec = (clock_hz / (1000 * 1000));
93}
94
95void
96platform_initclocks(void)
97{
98
99 if (platform_timecounter != NULL)
100 tc_init(platform_timecounter);
101}
102
103static uint64_t
104tick_ticker(void)
105{
106 uint64_t ret;
107 uint32_t ticktock;
108 uint32_t t_lower_last, t_upper;
109
110 /*
111 * Disable preemption because we are working with cpu specific data.
112 */
113 critical_enter();
114
115 /*
116 * Note that even though preemption is disabled, interrupts are
117 * still enabled. In particular there is a race with clock_intr()
118 * reading the values of 'counter_upper' and 'counter_lower_last'.
119 *
120 * XXX this depends on clock_intr() being executed periodically
121 * so that 'counter_upper' and 'counter_lower_last' are not stale.
122 */
123 do {
124 t_upper = DPCPU_GET(counter_upper);
125 t_lower_last = DPCPU_GET(counter_lower_last);
126 } while (t_upper != DPCPU_GET(counter_upper));
127
128 ticktock = mips_rd_count();
129
130 critical_exit();
131
132 /* COUNT register wrapped around */
133 if (ticktock < t_lower_last)
134 t_upper++;
135
136 ret = ((uint64_t)t_upper << 32) | ticktock;
137 return (ret);
138}
139
140void
141mips_timer_init_params(uint64_t platform_counter_freq, int double_count)
142{
143
144 /*
145 * XXX: Do not use printf here: uart code 8250 may use DELAY so this
146 * function should be called before cninit.
147 */
148 counter_freq = platform_counter_freq;
149 /*
150 * XXX: Some MIPS32 cores update the Count register only every two
151 * pipeline cycles.
152 * We know this because of status registers in CP0, make it automatic.
153 */
154 if (double_count != 0)
155 counter_freq /= 2;
156
157 cycles_per_usec = counter_freq / (1 * 1000 * 1000);
158 set_cputicker(tick_ticker, counter_freq, 1);
159}
160
161static int
162sysctl_machdep_counter_freq(SYSCTL_HANDLER_ARGS)
163{
164 int error;
165 uint64_t freq;
166
167 if (softc == NULL)
168 return (EOPNOTSUPP);
169 freq = counter_freq;
170 error = sysctl_handle_int(oidp, &freq, sizeof(freq), req);
171 if (error == 0 && req->newptr != NULL) {
172 counter_freq = freq;
173 softc->et.et_frequency = counter_freq;
174 softc->tc.tc_frequency = counter_freq;
175 }
176 return (error);
177}
178
179SYSCTL_PROC(_machdep, OID_AUTO, counter_freq, CTLTYPE_QUAD | CTLFLAG_RW,
180 0, sizeof(u_int), sysctl_machdep_counter_freq, "IU",
181 "Timecounter frequency in Hz");
182
183static unsigned
184counter_get_timecount(struct timecounter *tc)
185{
186
187 return (mips_rd_count());
188}
189
190/*
191 * Wait for about n microseconds (at least!).
192 */
193void
194DELAY(int n)
195{
196 uint32_t cur, last, delta, usecs;
197
198 /*
199 * This works by polling the timer and counting the number of
200 * microseconds that go by.
201 */
202 last = mips_rd_count();
203 delta = usecs = 0;
204
205 while (n > usecs) {
206 cur = mips_rd_count();
207
208 /* Check to see if the timer has wrapped around. */
209 if (cur < last)
210 delta += cur + (0xffffffff - last) + 1;
211 else
212 delta += cur - last;
213
214 last = cur;
215
216 if (delta >= cycles_per_usec) {
217 usecs += delta / cycles_per_usec;
218 delta %= cycles_per_usec;
219 }
220 }
221}
222
223static int
224clock_start(struct eventtimer *et,
225 struct bintime *first, struct bintime *period)
226{
227 uint32_t fdiv, div, next;
228
229 if (period != NULL) {
230 div = (et->et_frequency * (period->frac >> 32)) >> 32;
231 if (period->sec != 0)
232 div += et->et_frequency * period->sec;
233 } else
234 div = 0;
235 if (first != NULL) {
236 fdiv = (et->et_frequency * (first->frac >> 32)) >> 32;
237 if (first->sec != 0)
238 fdiv += et->et_frequency * first->sec;
239 } else
240 fdiv = div;
241 DPCPU_SET(cycles_per_tick, div);
242 next = mips_rd_count() + fdiv;
243 DPCPU_SET(compare_ticks, next);
244 mips_wr_compare(next);
245 return (0);
246}
247
248static int
249clock_stop(struct eventtimer *et)
250{
251
252 DPCPU_SET(cycles_per_tick, 0);
253 mips_wr_compare(0xffffffff);
254 return (0);
255}
256
257/*
258 * Device section of file below
259 */
260static int
261clock_intr(void *arg)
262{
263 struct clock_softc *sc = (struct clock_softc *)arg;
264 uint32_t cycles_per_tick;
265 uint32_t count, compare_last, compare_next, lost_ticks;
266
267 cycles_per_tick = DPCPU_GET(cycles_per_tick);
268 /*
269 * Set next clock edge.
270 */
271 count = mips_rd_count();
272 compare_last = DPCPU_GET(compare_ticks);
273 if (cycles_per_tick > 0) {
274 compare_next = count + cycles_per_tick;
275 DPCPU_SET(compare_ticks, compare_next);
276 mips_wr_compare(compare_next);
277 } else /* In one-shot mode timer should be stopped after the event. */
278 mips_wr_compare(0xffffffff);
279
280 /* COUNT register wrapped around */
281 if (count < DPCPU_GET(counter_lower_last)) {
282 DPCPU_SET(counter_upper, DPCPU_GET(counter_upper) + 1);
283 }
284 DPCPU_SET(counter_lower_last, count);
285
286 if (cycles_per_tick > 0) {
287
288 /*
289 * Account for the "lost time" between when the timer interrupt
290 * fired and when 'clock_intr' actually started executing.
291 */
292 lost_ticks = DPCPU_GET(lost_ticks);
293 lost_ticks += count - compare_last;
294
295 /*
296 * If the COUNT and COMPARE registers are no longer in sync
297 * then make up some reasonable value for the 'lost_ticks'.
298 *
299 * This could happen, for e.g., after we resume normal
300 * operations after exiting the debugger.
301 */
302 if (lost_ticks > 2 * cycles_per_tick)
303 lost_ticks = cycles_per_tick;
304
305 while (lost_ticks >= cycles_per_tick) {
306 if (sc->et.et_active)
307 sc->et.et_event_cb(&sc->et, sc->et.et_arg);
308 lost_ticks -= cycles_per_tick;
309 }
310 DPCPU_SET(lost_ticks, lost_ticks);
311 }
312 if (sc->et.et_active)
313 sc->et.et_event_cb(&sc->et, sc->et.et_arg);
314 return (FILTER_HANDLED);
315}
316
317static int
318clock_probe(device_t dev)
319{
320
321 if (device_get_unit(dev) != 0)
322 panic("can't attach more clocks");
323
324 device_set_desc(dev, "Generic MIPS32 ticker");
325 return (0);
326}
327
328static void
329clock_identify(driver_t * drv, device_t parent)
330{
331
332 BUS_ADD_CHILD(parent, 0, "clock", 0);
333}
334
335static int
336clock_attach(device_t dev)
337{
338 struct clock_softc *sc;
339
340 softc = sc = device_get_softc(dev);
341 cpu_establish_hardintr("compare", clock_intr, NULL,
342 sc, IRQ_TIMER, INTR_TYPE_CLK, &sc->intr_handler);
343
344 sc->tc.tc_get_timecount = counter_get_timecount;
345 sc->tc.tc_counter_mask = 0xffffffff;
346 sc->tc.tc_frequency = counter_freq;
347 sc->tc.tc_name = "MIPS32";
348 sc->tc.tc_quality = 800;
349 sc->tc.tc_priv = sc;
350 tc_init(&sc->tc);
351 sc->et.et_name = "MIPS32";
352 sc->et.et_flags = ET_FLAGS_PERIODIC | ET_FLAGS_ONESHOT |
353 ET_FLAGS_PERCPU;
354 sc->et.et_quality = 800;
355 sc->et.et_frequency = counter_freq;
356 sc->et.et_min_period.sec = 0;
357 sc->et.et_min_period.frac = 0x00004000LLU << 32; /* To be safe. */
358 sc->et.et_max_period.sec = 0xfffffffeU / sc->et.et_frequency;
359 sc->et.et_max_period.frac =
360 ((0xfffffffeLLU << 32) / sc->et.et_frequency) << 32;
361 sc->et.et_start = clock_start;
362 sc->et.et_stop = clock_stop;
363 sc->et.et_priv = sc;
364 et_register(&sc->et);
365 return (0);
366}
367
368static device_method_t clock_methods[] = {
369 /* Device interface */
370 DEVMETHOD(device_probe, clock_probe),
371 DEVMETHOD(device_identify, clock_identify),
372 DEVMETHOD(device_attach, clock_attach),
373 DEVMETHOD(device_detach, bus_generic_detach),
374 DEVMETHOD(device_shutdown, bus_generic_shutdown),
375
376 {0, 0}
377};
378
379static driver_t clock_driver = {
380 "clock",
381 clock_methods,
382 sizeof(struct clock_softc),
383};
384
385static devclass_t clock_devclass;
386
387DRIVER_MODULE(clock, nexus, clock_driver, clock_devclass, 0, 0);