1/*- 2 * Copyright (c) 2003-2009 RMI Corporation 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 3. Neither the name of RMI Corporation, nor the names of its contributors, 14 * may be used to endorse or promote products derived from this software 15 * without specific prior written permission. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 20 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 21 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 27 * SUCH DAMAGE. 28 * 29 * RMI_BSD
|
30 * $FreeBSD: head/sys/mips/rmi/rmi_mips_exts.h 212366 2010-09-09 17:45:48Z jchandra $
|
30 * $FreeBSD: head/sys/mips/rmi/rmi_mips_exts.h 212758 2010-09-16 19:13:55Z jchandra $ |
31 */ 32#ifndef __MIPS_EXTS_H__ 33#define __MIPS_EXTS_H__ 34 35#define CPU_BLOCKID_IFU 0 36#define CPU_BLOCKID_ICU 1 37#define CPU_BLOCKID_IEU 2 38#define CPU_BLOCKID_LSU 3 39#define CPU_BLOCKID_MMU 4 40#define CPU_BLOCKID_PRF 5 41 42#define LSU_CERRLOG_REGID 9 43 44#if defined(__mips_n64) || defined(__mips_n32) 45static __inline uint64_t 46read_xlr_ctrl_register(int block, int reg) 47{ 48 uint64_t res; 49 50 __asm__ __volatile__( 51 ".set push\n\t" 52 ".set noreorder\n\t" 53 "move $9, %1\n\t" 54 ".word 0x71280018\n\t" /* mfcr $8, $9 */ 55 "move %0, $8\n\t" 56 ".set pop\n" 57 : "=r" (res) : "r"((block << 8) | reg) 58 : "$8", "$9" 59 ); 60 return (res); 61} 62 63static __inline void 64write_xlr_ctrl_register(int block, int reg, uint64_t value) 65{ 66 __asm__ __volatile__( 67 ".set push\n\t" 68 ".set noreorder\n\t" 69 "move $8, %0\n" 70 "move $9, %1\n" 71 ".word 0x71280019\n" /* mtcr $8, $9 */ 72 ".set pop\n" 73 : 74 : "r" (value), "r" ((block << 8) | reg) 75 : "$8", "$9" 76 ); 77} 78 79#else /* !(defined(__mips_n64) || defined(__mips_n32)) */ 80 81static __inline uint64_t 82read_xlr_ctrl_register(int block, int reg) 83{ 84 uint32_t high, low; 85 86 __asm__ __volatile__( 87 ".set push\n\t" 88 ".set noreorder\n\t" 89 ".set mips64\n\t" 90 "move $9, %2\n" 91 ".word 0x71280018\n" /* "mfcr $8, $9\n" */ 92 "dsra32 %0, $8, 0\n\t" 93 "sll %1, $8, 0\n\t" 94 ".set pop" 95 : "=r" (high), "=r"(low) 96 : "r" ((block << 8) | reg) 97 : "$8", "$9"); 98 99 return ( (((uint64_t)high) << 32) | low); 100} 101 102static __inline void 103write_xlr_ctrl_register(int block, int reg, uint64_t value) 104{ 105 uint32_t low, high; 106 high = value >> 32; 107 low = value & 0xffffffff; 108 109 __asm__ __volatile__( 110 ".set push\n\t" 111 ".set noreorder\n\t" 112 ".set mips64\n\t" 113 "dsll32 $9, %0, 0\n\t" 114 "dsll32 $8, %1, 0\n\t" 115 "dsrl32 $8, $8, 0\n\t" 116 "or $8, $9, $8\n\t" 117 "move $9, %2\n\t" 118 ".word 0x71280019\n\t" /* mtcr $8, $9 */ 119 ".set pop\n" 120 : /* No outputs */ 121 : "r" (high), "r" (low), "r"((block << 8) | reg) 122 : "$8", "$9"); 123} 124#endif /* defined(__mips_n64) || defined(__mips_n32) */ 125 126/* 127 * 32 bit read write for c0 128 */ 129#define read_c0_register32(reg, sel) \ 130({ \ 131 uint32_t __rv; \ 132 __asm__ __volatile__( \ 133 ".set push\n\t" \ 134 ".set mips32\n\t" \ 135 "mfc0 %0, $%1, %2\n\t" \ 136 ".set pop\n" \ 137 : "=r" (__rv) : "i" (reg), "i" (sel) ); \ 138 __rv; \ 139 }) 140 141#define write_c0_register32(reg, sel, value) \ 142 __asm__ __volatile__( \ 143 ".set push\n\t" \ 144 ".set mips32\n\t" \ 145 "mtc0 %0, $%1, %2\n\t" \ 146 ".set pop\n" \ 147 : : "r" (value), "i" (reg), "i" (sel) ); 148 149#define read_c2_register32(reg, sel) \ 150({ \ 151 uint32_t __rv; \ 152 __asm__ __volatile__( \ 153 ".set push\n\t" \ 154 ".set mips32\n\t" \ 155 "mfc2 %0, $%1, %2\n\t" \ 156 ".set pop\n" \ 157 : "=r" (__rv) : "i" (reg), "i" (sel) ); \ 158 __rv; \ 159 }) 160 161#define write_c2_register32(reg, sel, value) \ 162 __asm__ __volatile__( \ 163 ".set push\n\t" \ 164 ".set mips32\n\t" \ 165 "mtc2 %0, $%1, %2\n\t" \ 166 ".set pop\n" \ 167 : : "r" (value), "i" (reg), "i" (sel) ); 168 169#if defined(__mips_n64) || defined(__mips_n32) 170/* 171 * On 64 bit compilation, the operations are simple 172 */ 173#define read_c0_register64(reg, sel) \ 174({ \ 175 uint64_t __rv; \ 176 __asm__ __volatile__( \ 177 ".set push\n\t" \ 178 ".set mips64\n\t" \ 179 "dmfc0 %0, $%1, %2\n\t" \ 180 ".set pop\n" \ 181 : "=r" (__rv) : "i" (reg), "i" (sel) ); \ 182 __rv; \ 183 }) 184 185#define write_c0_register64(reg, sel, value) \ 186 __asm__ __volatile__( \ 187 ".set push\n\t" \ 188 ".set mips64\n\t" \ 189 "dmtc0 %0, $%1, %2\n\t" \ 190 ".set pop\n" \ 191 : : "r" (value), "i" (reg), "i" (sel) ); 192 193#define read_c2_register64(reg, sel) \ 194({ \ 195 uint64_t __rv; \ 196 __asm__ __volatile__( \ 197 ".set push\n\t" \ 198 ".set mips64\n\t" \ 199 "dmfc2 %0, $%1, %2\n\t" \ 200 ".set pop\n" \ 201 : "=r" (__rv) : "i" (reg), "i" (sel) ); \ 202 __rv; \ 203 }) 204 205#define write_c2_register64(reg, sel, value) \ 206 __asm__ __volatile__( \ 207 ".set push\n\t" \ 208 ".set mips64\n\t" \ 209 "dmtc2 %0, $%1, %2\n\t" \ 210 ".set pop\n" \ 211 : : "r" (value), "i" (reg), "i" (sel) ); 212 213#else /* ! (defined(__mips_n64) || defined(__mips_n32)) */ 214 215/* 216 * 32 bit compilation, 64 bit values has to split 217 */ 218#define read_c0_register64(reg, sel) \ 219({ \ 220 uint32_t __high, __low; \ 221 __asm__ __volatile__( \ 222 ".set push\n\t" \ 223 ".set noreorder\n\t" \ 224 ".set mips64\n\t" \ 225 "dmfc0 $8, $%2, %3\n\t" \ 226 "dsra32 %0, $8, 0\n\t" \ 227 "sll %1, $8, 0\n\t" \ 228 ".set pop\n" \ 229 : "=r"(__high), "=r"(__low): "i"(reg), "i"(sel) \ 230 : "$8"); \ 231 ((uint64_t)__high << 32) | __low; \ 232}) 233 234#define write_c0_register64(reg, sel, value) \ 235do { \ 236 uint32_t __high = value >> 32; \ 237 uint32_t __low = value & 0xffffffff; \ 238 __asm__ __volatile__( \ 239 ".set push\n\t" \ 240 ".set noreorder\n\t" \ 241 ".set mips64\n\t" \ 242 "dsll32 $8, %1, 0\n\t" \ 243 "dsll32 $9, %0, 0\n\t" \ 244 "dsrl32 $8, $8, 0\n\t" \ 245 "or $8, $8, $9\n\t" \ 246 "dmtc0 $8, $%2, %3\n\t" \ 247 ".set pop" \ 248 :: "r"(__high), "r"(__low), "i"(reg), "i"(sel) \ 249 :"$8", "$9"); \ 250} while(0) 251 252#define read_c2_register64(reg, sel) \ 253({ \ 254 uint32_t __high, __low; \ 255 __asm__ __volatile__( \ 256 ".set push\n\t" \ 257 ".set noreorder\n\t" \ 258 ".set mips64\n\t" \ 259 "dmfc2 $8, $%2, %3\n\t" \ 260 "dsra32 %0, $8, 0\n\t" \ 261 "sll %1, $8, 0\n\t" \ 262 ".set pop\n" \ 263 : "=r"(__high), "=r"(__low): "i"(reg), "i"(sel) \ 264 : "$8"); \ 265 ((uint64_t)__high << 32) | __low; \ 266}) 267 268#define write_c2_register64(reg, sel, value) \ 269do { \ 270 uint32_t __high = value >> 32; \ 271 uint32_t __low = value & 0xffffffff; \ 272 __asm__ __volatile__( \ 273 ".set push\n\t" \ 274 ".set noreorder\n\t" \ 275 ".set mips64\n\t" \ 276 "dsll32 $8, %1, 0\n\t" \ 277 "dsll32 $9, %0, 0\n\t" \ 278 "dsrl32 $8, $8, 0\n\t" \ 279 "or $8, $8, $9\n\t" \ 280 "dmtc2 $8, $%2, %3\n\t" \ 281 ".set pop" \ 282 :: "r"(__high), "r"(__low), "i"(reg), "i"(sel) \ 283 :"$8", "$9"); \ 284} while(0) 285 286#endif /* defined(__mips_n64) || defined(__mips_n32) */ 287 288static __inline int 289xlr_cpu_id(void) 290{ 291 292 return (read_c0_register32(15, 1) & 0x1f); 293} 294 295static __inline int 296xlr_core_id(void) 297{ 298 299 return (xlr_cpu_id() / 4); 300} 301 302static __inline int 303xlr_thr_id(void) 304{ 305 306 return (read_c0_register32(15, 1) & 0x3); 307} 308 309/* Additional registers on the XLR */ 310#define MIPS_COP_0_OSSCRATCH 22 311#define XLR_CACHELINE_SIZE 32 312#define XLR_MAX_CORES 8 313 314/* functions to write to and read from the extended 315 * cp0 registers. 316 * EIRR : Extended Interrupt Request Register 317 * cp0 register 9 sel 6 318 * bits 0...7 are same as cause register 8...15 319 * EIMR : Extended Interrupt Mask Register 320 * cp0 register 9 sel 7 321 * bits 0...7 are same as status register 8...15 322 */ 323static __inline uint64_t 324read_c0_eirr64(void) 325{ 326 327 return (read_c0_register64(9, 6)); 328} 329 330static __inline void 331write_c0_eirr64(uint64_t val) 332{ 333 334 write_c0_register64(9, 6, val); 335} 336 337static __inline uint64_t 338read_c0_eimr64(void) 339{ 340 341 return (read_c0_register64(9, 7)); 342} 343 344static __inline void 345write_c0_eimr64(uint64_t val) 346{ 347 348 write_c0_register64(9, 7, val); 349} 350
|
351static __inline__ int
|
351static __inline int |
352xlr_test_and_set(int *lock) 353{ 354 int oldval = 0; 355 356 __asm__ __volatile__( 357 ".set push\n" 358 ".set noreorder\n" 359 "move $9, %2\n" 360 "li $8, 1\n" 361 // "swapw $8, $9\n" 362 ".word 0x71280014\n" 363 "move %1, $8\n" 364 ".set pop\n" 365 : "+m"(*lock), "=r"(oldval) 366 : "r"((unsigned long)lock) 367 : "$8", "$9" 368 ); 369
|
370 return (oldval == 0 ? 1 /* success */ : 0 /* failure */ );
|
370 return (oldval == 0 ? 1 /* success */ : 0 /* failure */); |
371} 372
|
373static __inline__ uint32_t
|
373static __inline uint32_t |
374xlr_mfcr(uint32_t reg) 375{ 376 uint32_t val; 377 378 __asm__ __volatile__( 379 "move $8, %1\n" 380 ".word 0x71090018\n" 381 "move %0, $9\n" 382 : "=r"(val) 383 : "r"(reg):"$8", "$9"); 384 385 return val; 386} 387
|
388static __inline__ void
|
388static __inline void |
389xlr_mtcr(uint32_t reg, uint32_t val) 390{ 391 __asm__ __volatile__( 392 "move $8, %1\n" 393 "move $9, %0\n" 394 ".word 0x71090019\n" 395 :: "r"(val), "r"(reg) 396 : "$8", "$9"); 397} 398
|
399/* 400 * Atomic increment a unsigned int 401 */ 402static __inline unsigned int 403xlr_ldaddwu(unsigned int value, unsigned int *addr) 404{ 405 __asm__ __volatile__( 406 ".set push\n" 407 ".set noreorder\n" 408 "move $8, %2\n" 409 "move $9, %3\n" 410 ".word 0x71280011\n" /* ldaddwu $8, $9 */ 411 "move %0, $8\n" 412 ".set pop\n" 413 : "=&r"(value), "+m"(*addr) 414 : "0"(value), "r" ((unsigned long)addr) 415 : "$8", "$9"); 416 417 return (value); 418} 419 |
420#if defined(__mips_n64)
|
400static __inline__ uint32_t
401xlr_paddr_lw(uint64_t paddr)
|
421static __inline uint64_t 422xlr_paddr_ld(uint64_t paddr) |
423{ 424 425 paddr |= 0x9800000000000000ULL;
|
405 return (*(uint32_t *)(uintptr_t)paddr);
|
426 return (*(uint64_t *)(uintptr_t)paddr); |
427} 428 429#elif defined(__mips_n32)
|
409static __inline__ uint32_t
410xlr_paddr_lw(uint64_t paddr)
|
430static __inline uint64_t 431xlr_paddr_ld(uint64_t paddr) |
432{
|
412 uint32_t val;
|
433 uint64_t val; |
434 435 paddr |= 0x9800000000000000ULL; 436 __asm__ __volatile__( 437 ".set push \n\t" 438 ".set mips64 \n\t"
|
418 "lw %0, 0(%1) \n\t"
|
439 "ld %0, 0(%1) \n\t" |
440 ".set pop \n" 441 : "=r"(val) 442 : "r"(paddr)); 443 444 return (val); 445} 446#else
|
426static __inline__ uint32_t
427xlr_paddr_lw(uint64_t paddr)
|
447static __inline uint32_t 448xlr_paddr_ld(uint64_t paddr) |
449{
|
429 uint32_t high, low, tmp;
|
450 uint32_t addrh, addrl; 451 uint32_t valh, vall; |
452
|
431 high = 0x98000000 | (paddr >> 32);
432 low = paddr & 0xffffffff;
|
453 addrh = 0x98000000 | (paddr >> 32); 454 addrl = paddr & 0xffffffff; |
455 456 __asm__ __volatile__( 457 ".set push \n\t" 458 ".set mips64 \n\t"
|
437 "dsll32 %1, %1, 0 \n\t"
438 "dsll32 %2, %2, 0 \n\t" /* get rid of the */
439 "dsrl32 %2, %2, 0 \n\t" /* sign extend */
440 "or %1, %1, %2 \n\t"
441 "lw %0, 0(%1) \n\t"
|
459 "dsll32 %2, %2, 0 \n\t" 460 "dsll32 %3, %3, 0 \n\t" /* get rid of the */ 461 "dsrl32 %3, %3, 0 \n\t" /* sign extend */ 462 "or %2, %2, %3 \n\t" 463 "lw %0, 0(%2) \n\t" 464 "lw %1, 4(%2) \n\t" |
465 ".set pop \n"
|
443 : "=r"(tmp)
444 : "r"(high), "r"(low));
|
466 : "=&r"(valh), "=r"(vall) 467 : "r"(addrh), "r"(addrl)); |
468
|
446 return tmp;
|
469 return (((uint64_t)valh << 32) | vall); |
470} 471#endif 472
|
473/* 474 * XXX: Not really needed in n32 or n64, retain for now 475 */ 476#if defined(__mips_n64) || defined(__mips_n32) 477static __inline uint32_t 478xlr_enable_kx(void) 479{ 480 481 return (0); 482} 483 484static __inline void 485xlr_restore_kx(uint32_t sr) 486{ 487} 488#else 489static __inline uint32_t 490xlr_enable_kx(void) 491{ 492 uint32_t sr = mips_rd_status(); 493 494 mips_wr_status((sr & ~MIPS_SR_INT_IE) | MIPS_SR_KX); 495 return (sr); 496} 497 498static __inline void 499xlr_restore_kx(uint32_t sr) 500{ 501 502 mips_wr_status(sr); 503} 504#endif 505 |
506/* for cpuid to hardware thread id mapping */ 507extern uint32_t xlr_hw_thread_mask; 508extern int xlr_cpuid_to_hwtid[]; 509extern int xlr_hwtid_to_cpuid[]; 510 511#endif
|