1/*-
2 * Copyright (c) 2008 Ed Schouten <ed@FreeBSD.org>
3 * All rights reserved.
4 *
5 * Portions of this software were developed under sponsorship from Snow
6 * B.V., the Netherlands.
7 *
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions
10 * are met:
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in the
15 * documentation and/or other materials provided with the distribution.
16 *
17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
20 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
21 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
27 * SUCH DAMAGE.
28 */
29
30#include <sys/cdefs.h>
31__FBSDID("$FreeBSD: head/sys/kern/tty_inq.c 223575 2011-06-26 18:26:20Z ed $");
32
33#include <sys/param.h>
34#include <sys/kernel.h>
35#include <sys/lock.h>
36#include <sys/queue.h>
37#include <sys/sysctl.h>
38#include <sys/systm.h>
39#include <sys/tty.h>
40#include <sys/uio.h>
41
42#include <vm/uma.h>
43
44/*
45 * TTY input queue buffering.
46 *
47 * Unlike the output queue, the input queue has more features that are
48 * needed to properly implement various features offered by the TTY
49 * interface:
50 *
51 * - Data can be removed from the tail of the queue, which is used to
52 * implement backspace.
53 * - Once in a while, input has to be `canonicalized'. When ICANON is
54 * turned on, this will be done after a CR has been inserted.
55 * Otherwise, it should be done after any character has been inserted.
56 * - The input queue can store one bit per byte, called the quoting bit.
57 * This bit is used by TTYDISC to make backspace work on quoted
58 * characters.
59 *
60 * In most cases, there is probably less input than output, so unlike
61 * the outq, we'll stick to 128 byte blocks here.
62 */
63
64static int ttyinq_flush_secure = 1;
65SYSCTL_INT(_kern, OID_AUTO, tty_inq_flush_secure, CTLFLAG_RW,
66 &ttyinq_flush_secure, 0, "Zero buffers while flushing");
67
68#define TTYINQ_QUOTESIZE (TTYINQ_DATASIZE / BMSIZE)
69#define BMSIZE 32
70#define GETBIT(tib,boff) \
71 ((tib)->tib_quotes[(boff) / BMSIZE] & (1 << ((boff) % BMSIZE)))
72#define SETBIT(tib,boff) \
73 ((tib)->tib_quotes[(boff) / BMSIZE] |= (1 << ((boff) % BMSIZE)))
74#define CLRBIT(tib,boff) \
75 ((tib)->tib_quotes[(boff) / BMSIZE] &= ~(1 << ((boff) % BMSIZE)))
76
77struct ttyinq_block {
78 struct ttyinq_block *tib_prev;
79 struct ttyinq_block *tib_next;
80 uint32_t tib_quotes[TTYINQ_QUOTESIZE];
81 char tib_data[TTYINQ_DATASIZE];
82};
83
84static uma_zone_t ttyinq_zone;
85
86#define TTYINQ_INSERT_TAIL(ti, tib) do { \
87 if (ti->ti_end == 0) { \
88 tib->tib_prev = NULL; \
89 tib->tib_next = ti->ti_firstblock; \
90 ti->ti_firstblock = tib; \
91 } else { \
92 tib->tib_prev = ti->ti_lastblock; \
93 tib->tib_next = ti->ti_lastblock->tib_next; \
94 ti->ti_lastblock->tib_next = tib; \
95 } \
96 if (tib->tib_next != NULL) \
97 tib->tib_next->tib_prev = tib; \
98 ti->ti_nblocks++; \
99} while (0)
100
101#define TTYINQ_REMOVE_HEAD(ti) do { \
102 ti->ti_firstblock = ti->ti_firstblock->tib_next; \
103 if (ti->ti_firstblock != NULL) \
104 ti->ti_firstblock->tib_prev = NULL; \
105 ti->ti_nblocks--; \
106} while (0)
107
108#define TTYINQ_RECYCLE(ti, tib) do { \
109 if (ti->ti_quota <= ti->ti_nblocks) \
110 uma_zfree(ttyinq_zone, tib); \
111 else \
112 TTYINQ_INSERT_TAIL(ti, tib); \
113} while (0)
114
115void
116ttyinq_setsize(struct ttyinq *ti, struct tty *tp, size_t size)
117{
118 struct ttyinq_block *tib;
119
120 ti->ti_quota = howmany(size, TTYINQ_DATASIZE);
121
122 while (ti->ti_quota > ti->ti_nblocks) {
123 /*
124 * List is getting bigger.
125 * Add new blocks to the tail of the list.
126 *
127 * We must unlock the TTY temporarily, because we need
128 * to allocate memory. This won't be a problem, because
129 * in the worst case, another thread ends up here, which
130 * may cause us to allocate too many blocks, but this
131 * will be caught by the loop below.
132 */
133 tty_unlock(tp);
134 tib = uma_zalloc(ttyinq_zone, M_WAITOK);
135 tty_lock(tp);
136
137 TTYINQ_INSERT_TAIL(ti, tib);
138 }
139}
140
141void
142ttyinq_free(struct ttyinq *ti)
143{
144 struct ttyinq_block *tib;
145
146 ttyinq_flush(ti);
147 ti->ti_quota = 0;
148
149 while ((tib = ti->ti_firstblock) != NULL) {
150 TTYINQ_REMOVE_HEAD(ti);
151 uma_zfree(ttyinq_zone, tib);
152 }
153
154 MPASS(ti->ti_nblocks == 0);
155}
156
157int
158ttyinq_read_uio(struct ttyinq *ti, struct tty *tp, struct uio *uio,
159 size_t rlen, size_t flen)
160{
161
162 MPASS(rlen <= uio->uio_resid);
163
164 while (rlen > 0) {
165 int error;
166 struct ttyinq_block *tib;
167 size_t cbegin, cend, clen;
168
169 /* See if there still is data. */
170 if (ti->ti_begin == ti->ti_linestart)
171 return (0);
172 tib = ti->ti_firstblock;
173 if (tib == NULL)
174 return (0);
175
176 /*
177 * The end address should be the lowest of these three:
178 * - The write pointer
179 * - The blocksize - we can't read beyond the block
180 * - The end address if we could perform the full read
181 */
182 cbegin = ti->ti_begin;
183 cend = MIN(MIN(ti->ti_linestart, ti->ti_begin + rlen),
184 TTYINQ_DATASIZE);
185 clen = cend - cbegin;
186 MPASS(clen >= flen);
187 rlen -= clen;
188
189 /*
190 * We can prevent buffering in some cases:
191 * - We need to read the block until the end.
192 * - We don't need to read the block until the end, but
193 * there is no data beyond it, which allows us to move
194 * the write pointer to a new block.
195 */
196 if (cend == TTYINQ_DATASIZE || cend == ti->ti_end) {
197 /*
198 * Fast path: zero copy. Remove the first block,
199 * so we can unlock the TTY temporarily.
200 */
201 TTYINQ_REMOVE_HEAD(ti);
202 ti->ti_begin = 0;
203
204 /*
205 * Because we remove the first block, we must
206 * fix up the block offsets.
207 */
208#define CORRECT_BLOCK(t) do { \
209 if (t <= TTYINQ_DATASIZE) \
210 t = 0; \
211 else \
212 t -= TTYINQ_DATASIZE; \
213} while (0)
214 CORRECT_BLOCK(ti->ti_linestart);
215 CORRECT_BLOCK(ti->ti_reprint);
216 CORRECT_BLOCK(ti->ti_end);
217#undef CORRECT_BLOCK
218
219 /*
220 * Temporary unlock and copy the data to
221 * userspace. We may need to flush trailing
222 * bytes, like EOF characters.
223 */
224 tty_unlock(tp);
225 error = uiomove(tib->tib_data + cbegin,
226 clen - flen, uio);
227 tty_lock(tp);
228
229 /* Block can now be readded to the list. */
230 TTYINQ_RECYCLE(ti, tib);
231 } else {
232 char ob[TTYINQ_DATASIZE - 1];
233
234 /*
235 * Slow path: store data in a temporary buffer.
236 */
237 memcpy(ob, tib->tib_data + cbegin, clen - flen);
238 ti->ti_begin += clen;
239 MPASS(ti->ti_begin < TTYINQ_DATASIZE);
240
241 /* Temporary unlock and copy the data to userspace. */
242 tty_unlock(tp);
243 error = uiomove(ob, clen - flen, uio);
244 tty_lock(tp);
245 }
246
247 if (error != 0)
248 return (error);
249 if (tty_gone(tp))
250 return (ENXIO);
251 }
252
253 return (0);
254}
255
256static __inline void
257ttyinq_set_quotes(struct ttyinq_block *tib, size_t offset,
258 size_t length, int value)
259{
260
261 if (value) {
262 /* Set the bits. */
263 for (; length > 0; length--, offset++)
264 SETBIT(tib, offset);
265 } else {
266 /* Unset the bits. */
267 for (; length > 0; length--, offset++)
268 CLRBIT(tib, offset);
269 }
270}
271
272size_t
273ttyinq_write(struct ttyinq *ti, const void *buf, size_t nbytes, int quote)
274{
275 const char *cbuf = buf;
276 struct ttyinq_block *tib;
277 unsigned int boff;
278 size_t l;
279
280 while (nbytes > 0) {
281 boff = ti->ti_end % TTYINQ_DATASIZE;
282
283 if (ti->ti_end == 0) {
284 /* First time we're being used or drained. */
285 MPASS(ti->ti_begin == 0);
286 tib = ti->ti_firstblock;
287 if (tib == NULL) {
288 /* Queue has no blocks. */
289 break;
290 }
291 ti->ti_lastblock = tib;
292 } else if (boff == 0) {
293 /* We reached the end of this block on last write. */
294 tib = ti->ti_lastblock->tib_next;
295 if (tib == NULL) {
296 /* We've reached the watermark. */
297 break;
298 }
299 ti->ti_lastblock = tib;
300 } else {
301 tib = ti->ti_lastblock;
302 }
303
304 /* Don't copy more than was requested. */
305 l = MIN(nbytes, TTYINQ_DATASIZE - boff);
306 MPASS(l > 0);
307 memcpy(tib->tib_data + boff, cbuf, l);
308
309 /* Set the quoting bits for the proper region. */
310 ttyinq_set_quotes(tib, boff, l, quote);
311
312 cbuf += l;
313 nbytes -= l;
314 ti->ti_end += l;
315 }
316
317 return (cbuf - (const char *)buf);
318}
319
320int
321ttyinq_write_nofrag(struct ttyinq *ti, const void *buf, size_t nbytes, int quote)
322{
323 size_t ret;
324
325 if (ttyinq_bytesleft(ti) < nbytes)
326 return (-1);
327
328 /* We should always be able to write it back. */
329 ret = ttyinq_write(ti, buf, nbytes, quote);
330 MPASS(ret == nbytes);
331
332 return (0);
333}
334
335void
336ttyinq_canonicalize(struct ttyinq *ti)
337{
338
339 ti->ti_linestart = ti->ti_reprint = ti->ti_end;
340 ti->ti_startblock = ti->ti_reprintblock = ti->ti_lastblock;
341}
342
343size_t
344ttyinq_findchar(struct ttyinq *ti, const char *breakc, size_t maxlen,
345 char *lastc)
346{
347 struct ttyinq_block *tib = ti->ti_firstblock;
348 unsigned int boff = ti->ti_begin;
349 unsigned int bend = MIN(MIN(TTYINQ_DATASIZE, ti->ti_linestart),
350 ti->ti_begin + maxlen);
351
352 MPASS(maxlen > 0);
353
354 if (tib == NULL)
355 return (0);
356
357 while (boff < bend) {
358 if (index(breakc, tib->tib_data[boff]) && !GETBIT(tib, boff)) {
359 *lastc = tib->tib_data[boff];
360 return (boff - ti->ti_begin + 1);
361 }
362 boff++;
363 }
364
365 /* Not found - just process the entire block. */
366 return (bend - ti->ti_begin);
367}
368
369void
370ttyinq_flush(struct ttyinq *ti)
371{
372 struct ttyinq_block *tib;
373
374 ti->ti_begin = 0;
375 ti->ti_linestart = 0;
376 ti->ti_reprint = 0;
377 ti->ti_end = 0;
378
379 /* Zero all data in the input queue to get rid of passwords. */
380 if (ttyinq_flush_secure) {
381 for (tib = ti->ti_firstblock; tib != NULL; tib = tib->tib_next)
382 bzero(&tib->tib_data, sizeof tib->tib_data);
383 }
384}
385
386int
387ttyinq_peekchar(struct ttyinq *ti, char *c, int *quote)
388{
389 unsigned int boff;
390 struct ttyinq_block *tib = ti->ti_lastblock;
391
392 if (ti->ti_linestart == ti->ti_end)
393 return (-1);
394
395 MPASS(ti->ti_end > 0);
396 boff = (ti->ti_end - 1) % TTYINQ_DATASIZE;
397
398 *c = tib->tib_data[boff];
399 *quote = GETBIT(tib, boff);
400
401 return (0);
402}
403
404void
405ttyinq_unputchar(struct ttyinq *ti)
406{
407
408 MPASS(ti->ti_linestart < ti->ti_end);
409
410 if (--ti->ti_end % TTYINQ_DATASIZE == 0) {
411 /* Roll back to the previous block. */
412 ti->ti_lastblock = ti->ti_lastblock->tib_prev;
413 /*
414 * This can only fail if we are unputchar()'ing the
415 * first character in the queue.
416 */
417 MPASS((ti->ti_lastblock == NULL) == (ti->ti_end == 0));
418 }
419}
420
421void
422ttyinq_reprintpos_set(struct ttyinq *ti)
423{
424
425 ti->ti_reprint = ti->ti_end;
426 ti->ti_reprintblock = ti->ti_lastblock;
427}
428
429void
430ttyinq_reprintpos_reset(struct ttyinq *ti)
431{
432
433 ti->ti_reprint = ti->ti_linestart;
434 ti->ti_reprintblock = ti->ti_startblock;
435}
436
437static void
438ttyinq_line_iterate(struct ttyinq *ti,
439 ttyinq_line_iterator_t *iterator, void *data,
440 unsigned int offset, struct ttyinq_block *tib)
441{
442 unsigned int boff;
443
444 /* Use the proper block when we're at the queue head. */
445 if (offset == 0)
446 tib = ti->ti_firstblock;
447
448 /* Iterate all characters and call the iterator function. */
449 for (; offset < ti->ti_end; offset++) {
450 boff = offset % TTYINQ_DATASIZE;
451 MPASS(tib != NULL);
452
453 /* Call back the iterator function. */
454 iterator(data, tib->tib_data[boff], GETBIT(tib, boff));
455
456 /* Last byte iterated - go to the next block. */
457 if (boff == TTYINQ_DATASIZE - 1)
458 tib = tib->tib_next;
459 MPASS(tib != NULL);
460 }
461}
462
463void
464ttyinq_line_iterate_from_linestart(struct ttyinq *ti,
465 ttyinq_line_iterator_t *iterator, void *data)
466{
467
468 ttyinq_line_iterate(ti, iterator, data,
469 ti->ti_linestart, ti->ti_startblock);
470}
471
472void
473ttyinq_line_iterate_from_reprintpos(struct ttyinq *ti,
474 ttyinq_line_iterator_t *iterator, void *data)
475{
476
477 ttyinq_line_iterate(ti, iterator, data,
478 ti->ti_reprint, ti->ti_reprintblock);
479}
480
481static void
482ttyinq_startup(void *dummy)
483{
484
485 ttyinq_zone = uma_zcreate("ttyinq", sizeof(struct ttyinq_block),
486 NULL, NULL, NULL, NULL, UMA_ALIGN_PTR, 0);
487}
488
489SYSINIT(ttyinq, SI_SUB_DRIVERS, SI_ORDER_FIRST, ttyinq_startup, NULL);
2 * Copyright (c) 2008 Ed Schouten <ed@FreeBSD.org>
3 * All rights reserved.
4 *
5 * Portions of this software were developed under sponsorship from Snow
6 * B.V., the Netherlands.
7 *
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions
10 * are met:
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in the
15 * documentation and/or other materials provided with the distribution.
16 *
17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
20 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
21 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
27 * SUCH DAMAGE.
28 */
29
30#include <sys/cdefs.h>
31__FBSDID("$FreeBSD: head/sys/kern/tty_inq.c 223575 2011-06-26 18:26:20Z ed $");
32
33#include <sys/param.h>
34#include <sys/kernel.h>
35#include <sys/lock.h>
36#include <sys/queue.h>
37#include <sys/sysctl.h>
38#include <sys/systm.h>
39#include <sys/tty.h>
40#include <sys/uio.h>
41
42#include <vm/uma.h>
43
44/*
45 * TTY input queue buffering.
46 *
47 * Unlike the output queue, the input queue has more features that are
48 * needed to properly implement various features offered by the TTY
49 * interface:
50 *
51 * - Data can be removed from the tail of the queue, which is used to
52 * implement backspace.
53 * - Once in a while, input has to be `canonicalized'. When ICANON is
54 * turned on, this will be done after a CR has been inserted.
55 * Otherwise, it should be done after any character has been inserted.
56 * - The input queue can store one bit per byte, called the quoting bit.
57 * This bit is used by TTYDISC to make backspace work on quoted
58 * characters.
59 *
60 * In most cases, there is probably less input than output, so unlike
61 * the outq, we'll stick to 128 byte blocks here.
62 */
63
64static int ttyinq_flush_secure = 1;
65SYSCTL_INT(_kern, OID_AUTO, tty_inq_flush_secure, CTLFLAG_RW,
66 &ttyinq_flush_secure, 0, "Zero buffers while flushing");
67
68#define TTYINQ_QUOTESIZE (TTYINQ_DATASIZE / BMSIZE)
69#define BMSIZE 32
70#define GETBIT(tib,boff) \
71 ((tib)->tib_quotes[(boff) / BMSIZE] & (1 << ((boff) % BMSIZE)))
72#define SETBIT(tib,boff) \
73 ((tib)->tib_quotes[(boff) / BMSIZE] |= (1 << ((boff) % BMSIZE)))
74#define CLRBIT(tib,boff) \
75 ((tib)->tib_quotes[(boff) / BMSIZE] &= ~(1 << ((boff) % BMSIZE)))
76
77struct ttyinq_block {
78 struct ttyinq_block *tib_prev;
79 struct ttyinq_block *tib_next;
80 uint32_t tib_quotes[TTYINQ_QUOTESIZE];
81 char tib_data[TTYINQ_DATASIZE];
82};
83
84static uma_zone_t ttyinq_zone;
85
86#define TTYINQ_INSERT_TAIL(ti, tib) do { \
87 if (ti->ti_end == 0) { \
88 tib->tib_prev = NULL; \
89 tib->tib_next = ti->ti_firstblock; \
90 ti->ti_firstblock = tib; \
91 } else { \
92 tib->tib_prev = ti->ti_lastblock; \
93 tib->tib_next = ti->ti_lastblock->tib_next; \
94 ti->ti_lastblock->tib_next = tib; \
95 } \
96 if (tib->tib_next != NULL) \
97 tib->tib_next->tib_prev = tib; \
98 ti->ti_nblocks++; \
99} while (0)
100
101#define TTYINQ_REMOVE_HEAD(ti) do { \
102 ti->ti_firstblock = ti->ti_firstblock->tib_next; \
103 if (ti->ti_firstblock != NULL) \
104 ti->ti_firstblock->tib_prev = NULL; \
105 ti->ti_nblocks--; \
106} while (0)
107
108#define TTYINQ_RECYCLE(ti, tib) do { \
109 if (ti->ti_quota <= ti->ti_nblocks) \
110 uma_zfree(ttyinq_zone, tib); \
111 else \
112 TTYINQ_INSERT_TAIL(ti, tib); \
113} while (0)
114
115void
116ttyinq_setsize(struct ttyinq *ti, struct tty *tp, size_t size)
117{
118 struct ttyinq_block *tib;
119
120 ti->ti_quota = howmany(size, TTYINQ_DATASIZE);
121
122 while (ti->ti_quota > ti->ti_nblocks) {
123 /*
124 * List is getting bigger.
125 * Add new blocks to the tail of the list.
126 *
127 * We must unlock the TTY temporarily, because we need
128 * to allocate memory. This won't be a problem, because
129 * in the worst case, another thread ends up here, which
130 * may cause us to allocate too many blocks, but this
131 * will be caught by the loop below.
132 */
133 tty_unlock(tp);
134 tib = uma_zalloc(ttyinq_zone, M_WAITOK);
135 tty_lock(tp);
136
137 TTYINQ_INSERT_TAIL(ti, tib);
138 }
139}
140
141void
142ttyinq_free(struct ttyinq *ti)
143{
144 struct ttyinq_block *tib;
145
146 ttyinq_flush(ti);
147 ti->ti_quota = 0;
148
149 while ((tib = ti->ti_firstblock) != NULL) {
150 TTYINQ_REMOVE_HEAD(ti);
151 uma_zfree(ttyinq_zone, tib);
152 }
153
154 MPASS(ti->ti_nblocks == 0);
155}
156
157int
158ttyinq_read_uio(struct ttyinq *ti, struct tty *tp, struct uio *uio,
159 size_t rlen, size_t flen)
160{
161
162 MPASS(rlen <= uio->uio_resid);
163
164 while (rlen > 0) {
165 int error;
166 struct ttyinq_block *tib;
167 size_t cbegin, cend, clen;
168
169 /* See if there still is data. */
170 if (ti->ti_begin == ti->ti_linestart)
171 return (0);
172 tib = ti->ti_firstblock;
173 if (tib == NULL)
174 return (0);
175
176 /*
177 * The end address should be the lowest of these three:
178 * - The write pointer
179 * - The blocksize - we can't read beyond the block
180 * - The end address if we could perform the full read
181 */
182 cbegin = ti->ti_begin;
183 cend = MIN(MIN(ti->ti_linestart, ti->ti_begin + rlen),
184 TTYINQ_DATASIZE);
185 clen = cend - cbegin;
186 MPASS(clen >= flen);
187 rlen -= clen;
188
189 /*
190 * We can prevent buffering in some cases:
191 * - We need to read the block until the end.
192 * - We don't need to read the block until the end, but
193 * there is no data beyond it, which allows us to move
194 * the write pointer to a new block.
195 */
196 if (cend == TTYINQ_DATASIZE || cend == ti->ti_end) {
197 /*
198 * Fast path: zero copy. Remove the first block,
199 * so we can unlock the TTY temporarily.
200 */
201 TTYINQ_REMOVE_HEAD(ti);
202 ti->ti_begin = 0;
203
204 /*
205 * Because we remove the first block, we must
206 * fix up the block offsets.
207 */
208#define CORRECT_BLOCK(t) do { \
209 if (t <= TTYINQ_DATASIZE) \
210 t = 0; \
211 else \
212 t -= TTYINQ_DATASIZE; \
213} while (0)
214 CORRECT_BLOCK(ti->ti_linestart);
215 CORRECT_BLOCK(ti->ti_reprint);
216 CORRECT_BLOCK(ti->ti_end);
217#undef CORRECT_BLOCK
218
219 /*
220 * Temporary unlock and copy the data to
221 * userspace. We may need to flush trailing
222 * bytes, like EOF characters.
223 */
224 tty_unlock(tp);
225 error = uiomove(tib->tib_data + cbegin,
226 clen - flen, uio);
227 tty_lock(tp);
228
229 /* Block can now be readded to the list. */
230 TTYINQ_RECYCLE(ti, tib);
231 } else {
232 char ob[TTYINQ_DATASIZE - 1];
233
234 /*
235 * Slow path: store data in a temporary buffer.
236 */
237 memcpy(ob, tib->tib_data + cbegin, clen - flen);
238 ti->ti_begin += clen;
239 MPASS(ti->ti_begin < TTYINQ_DATASIZE);
240
241 /* Temporary unlock and copy the data to userspace. */
242 tty_unlock(tp);
243 error = uiomove(ob, clen - flen, uio);
244 tty_lock(tp);
245 }
246
247 if (error != 0)
248 return (error);
249 if (tty_gone(tp))
250 return (ENXIO);
251 }
252
253 return (0);
254}
255
256static __inline void
257ttyinq_set_quotes(struct ttyinq_block *tib, size_t offset,
258 size_t length, int value)
259{
260
261 if (value) {
262 /* Set the bits. */
263 for (; length > 0; length--, offset++)
264 SETBIT(tib, offset);
265 } else {
266 /* Unset the bits. */
267 for (; length > 0; length--, offset++)
268 CLRBIT(tib, offset);
269 }
270}
271
272size_t
273ttyinq_write(struct ttyinq *ti, const void *buf, size_t nbytes, int quote)
274{
275 const char *cbuf = buf;
276 struct ttyinq_block *tib;
277 unsigned int boff;
278 size_t l;
279
280 while (nbytes > 0) {
281 boff = ti->ti_end % TTYINQ_DATASIZE;
282
283 if (ti->ti_end == 0) {
284 /* First time we're being used or drained. */
285 MPASS(ti->ti_begin == 0);
286 tib = ti->ti_firstblock;
287 if (tib == NULL) {
288 /* Queue has no blocks. */
289 break;
290 }
291 ti->ti_lastblock = tib;
292 } else if (boff == 0) {
293 /* We reached the end of this block on last write. */
294 tib = ti->ti_lastblock->tib_next;
295 if (tib == NULL) {
296 /* We've reached the watermark. */
297 break;
298 }
299 ti->ti_lastblock = tib;
300 } else {
301 tib = ti->ti_lastblock;
302 }
303
304 /* Don't copy more than was requested. */
305 l = MIN(nbytes, TTYINQ_DATASIZE - boff);
306 MPASS(l > 0);
307 memcpy(tib->tib_data + boff, cbuf, l);
308
309 /* Set the quoting bits for the proper region. */
310 ttyinq_set_quotes(tib, boff, l, quote);
311
312 cbuf += l;
313 nbytes -= l;
314 ti->ti_end += l;
315 }
316
317 return (cbuf - (const char *)buf);
318}
319
320int
321ttyinq_write_nofrag(struct ttyinq *ti, const void *buf, size_t nbytes, int quote)
322{
323 size_t ret;
324
325 if (ttyinq_bytesleft(ti) < nbytes)
326 return (-1);
327
328 /* We should always be able to write it back. */
329 ret = ttyinq_write(ti, buf, nbytes, quote);
330 MPASS(ret == nbytes);
331
332 return (0);
333}
334
335void
336ttyinq_canonicalize(struct ttyinq *ti)
337{
338
339 ti->ti_linestart = ti->ti_reprint = ti->ti_end;
340 ti->ti_startblock = ti->ti_reprintblock = ti->ti_lastblock;
341}
342
343size_t
344ttyinq_findchar(struct ttyinq *ti, const char *breakc, size_t maxlen,
345 char *lastc)
346{
347 struct ttyinq_block *tib = ti->ti_firstblock;
348 unsigned int boff = ti->ti_begin;
349 unsigned int bend = MIN(MIN(TTYINQ_DATASIZE, ti->ti_linestart),
350 ti->ti_begin + maxlen);
351
352 MPASS(maxlen > 0);
353
354 if (tib == NULL)
355 return (0);
356
357 while (boff < bend) {
358 if (index(breakc, tib->tib_data[boff]) && !GETBIT(tib, boff)) {
359 *lastc = tib->tib_data[boff];
360 return (boff - ti->ti_begin + 1);
361 }
362 boff++;
363 }
364
365 /* Not found - just process the entire block. */
366 return (bend - ti->ti_begin);
367}
368
369void
370ttyinq_flush(struct ttyinq *ti)
371{
372 struct ttyinq_block *tib;
373
374 ti->ti_begin = 0;
375 ti->ti_linestart = 0;
376 ti->ti_reprint = 0;
377 ti->ti_end = 0;
378
379 /* Zero all data in the input queue to get rid of passwords. */
380 if (ttyinq_flush_secure) {
381 for (tib = ti->ti_firstblock; tib != NULL; tib = tib->tib_next)
382 bzero(&tib->tib_data, sizeof tib->tib_data);
383 }
384}
385
386int
387ttyinq_peekchar(struct ttyinq *ti, char *c, int *quote)
388{
389 unsigned int boff;
390 struct ttyinq_block *tib = ti->ti_lastblock;
391
392 if (ti->ti_linestart == ti->ti_end)
393 return (-1);
394
395 MPASS(ti->ti_end > 0);
396 boff = (ti->ti_end - 1) % TTYINQ_DATASIZE;
397
398 *c = tib->tib_data[boff];
399 *quote = GETBIT(tib, boff);
400
401 return (0);
402}
403
404void
405ttyinq_unputchar(struct ttyinq *ti)
406{
407
408 MPASS(ti->ti_linestart < ti->ti_end);
409
410 if (--ti->ti_end % TTYINQ_DATASIZE == 0) {
411 /* Roll back to the previous block. */
412 ti->ti_lastblock = ti->ti_lastblock->tib_prev;
413 /*
414 * This can only fail if we are unputchar()'ing the
415 * first character in the queue.
416 */
417 MPASS((ti->ti_lastblock == NULL) == (ti->ti_end == 0));
418 }
419}
420
421void
422ttyinq_reprintpos_set(struct ttyinq *ti)
423{
424
425 ti->ti_reprint = ti->ti_end;
426 ti->ti_reprintblock = ti->ti_lastblock;
427}
428
429void
430ttyinq_reprintpos_reset(struct ttyinq *ti)
431{
432
433 ti->ti_reprint = ti->ti_linestart;
434 ti->ti_reprintblock = ti->ti_startblock;
435}
436
437static void
438ttyinq_line_iterate(struct ttyinq *ti,
439 ttyinq_line_iterator_t *iterator, void *data,
440 unsigned int offset, struct ttyinq_block *tib)
441{
442 unsigned int boff;
443
444 /* Use the proper block when we're at the queue head. */
445 if (offset == 0)
446 tib = ti->ti_firstblock;
447
448 /* Iterate all characters and call the iterator function. */
449 for (; offset < ti->ti_end; offset++) {
450 boff = offset % TTYINQ_DATASIZE;
451 MPASS(tib != NULL);
452
453 /* Call back the iterator function. */
454 iterator(data, tib->tib_data[boff], GETBIT(tib, boff));
455
456 /* Last byte iterated - go to the next block. */
457 if (boff == TTYINQ_DATASIZE - 1)
458 tib = tib->tib_next;
459 MPASS(tib != NULL);
460 }
461}
462
463void
464ttyinq_line_iterate_from_linestart(struct ttyinq *ti,
465 ttyinq_line_iterator_t *iterator, void *data)
466{
467
468 ttyinq_line_iterate(ti, iterator, data,
469 ti->ti_linestart, ti->ti_startblock);
470}
471
472void
473ttyinq_line_iterate_from_reprintpos(struct ttyinq *ti,
474 ttyinq_line_iterator_t *iterator, void *data)
475{
476
477 ttyinq_line_iterate(ti, iterator, data,
478 ti->ti_reprint, ti->ti_reprintblock);
479}
480
481static void
482ttyinq_startup(void *dummy)
483{
484
485 ttyinq_zone = uma_zcreate("ttyinq", sizeof(struct ttyinq_block),
486 NULL, NULL, NULL, NULL, UMA_ALIGN_PTR, 0);
487}
488
489SYSINIT(ttyinq, SI_SUB_DRIVERS, SI_ORDER_FIRST, ttyinq_startup, NULL);