ls1021a-twr.dts (279385) | ls1021a-twr.dts (295436) |
---|---|
1/* 2 * Copyright 2013-2014 Freescale Semiconductor, Inc. 3 * 4 * This file is dual-licensed: you can use it either under the terms 5 * of the GPL or the X11 license, at your option. Note that this dual 6 * licensing only applies to this file, and not this project as a 7 * whole. 8 * --- 42 unchanged lines hidden (view full) --- 51/ { 52 model = "LS1021A TWR Board"; 53 54 aliases { 55 enet2_rgmii_phy = &rgmii_phy1; 56 enet0_sgmii_phy = &sgmii_phy2; 57 enet1_sgmii_phy = &sgmii_phy0; 58 }; | 1/* 2 * Copyright 2013-2014 Freescale Semiconductor, Inc. 3 * 4 * This file is dual-licensed: you can use it either under the terms 5 * of the GPL or the X11 license, at your option. Note that this dual 6 * licensing only applies to this file, and not this project as a 7 * whole. 8 * --- 42 unchanged lines hidden (view full) --- 51/ { 52 model = "LS1021A TWR Board"; 53 54 aliases { 55 enet2_rgmii_phy = &rgmii_phy1; 56 enet0_sgmii_phy = &sgmii_phy2; 57 enet1_sgmii_phy = &sgmii_phy0; 58 }; |
59 60 sys_mclk: clock-mclk { 61 compatible = "fixed-clock"; 62 #clock-cells = <0>; 63 clock-frequency = <24576000>; 64 }; 65 66 regulators { 67 compatible = "simple-bus"; 68 #address-cells = <1>; 69 #size-cells = <0>; 70 71 reg_3p3v: regulator@0 { 72 compatible = "regulator-fixed"; 73 reg = <0>; 74 regulator-name = "3P3V"; 75 regulator-min-microvolt = <3300000>; 76 regulator-max-microvolt = <3300000>; 77 regulator-always-on; 78 }; 79 }; 80 81 sound { 82 compatible = "simple-audio-card"; 83 simple-audio-card,format = "i2s"; 84 simple-audio-card,widgets = 85 "Microphone", "Microphone Jack", 86 "Headphone", "Headphone Jack", 87 "Speaker", "Speaker Ext", 88 "Line", "Line In Jack"; 89 simple-audio-card,routing = 90 "MIC_IN", "Microphone Jack", 91 "Microphone Jack", "Mic Bias", 92 "LINE_IN", "Line In Jack", 93 "Headphone Jack", "HP_OUT", 94 "Speaker Ext", "LINE_OUT"; 95 96 simple-audio-card,cpu { 97 sound-dai = <&sai1>; 98 frame-master; 99 bitclock-master; 100 }; 101 102 simple-audio-card,codec { 103 sound-dai = <&codec>; 104 frame-master; 105 bitclock-master; 106 }; 107 }; 108 109 panel: panel { 110 compatible = "nec,nl4827hc19-05b"; 111 }; |
|
59}; 60 | 112}; 113 |
114&dcu { 115 fsl,panel = <&panel>; 116 status = "okay"; 117}; 118 |
|
61&dspi1 { 62 bus-num = <0>; 63 status = "okay"; 64 65 dspiflash: s25fl064k@0 { 66 #address-cells = <1>; 67 #size-cells = <1>; 68 compatible = "spansion,s25fl064k"; 69 spi-max-frequency = <16000000>; 70 spi-cpol; 71 spi-cpha; 72 reg = <0>; 73 }; 74}; 75 | 119&dspi1 { 120 bus-num = <0>; 121 status = "okay"; 122 123 dspiflash: s25fl064k@0 { 124 #address-cells = <1>; 125 #size-cells = <1>; 126 compatible = "spansion,s25fl064k"; 127 spi-max-frequency = <16000000>; 128 spi-cpol; 129 spi-cpha; 130 reg = <0>; 131 }; 132}; 133 |
134&enet0 { 135 tbi-handle = <&tbi1>; 136 phy-handle = <&sgmii_phy2>; 137 phy-connection-type = "sgmii"; 138 status = "okay"; 139}; 140 141&enet1 { 142 tbi-handle = <&tbi1>; 143 phy-handle = <&sgmii_phy0>; 144 phy-connection-type = "sgmii"; 145 status = "okay"; 146}; 147 148&enet2 { 149 phy-handle = <&rgmii_phy1>; 150 phy-connection-type = "rgmii-id"; 151 status = "okay"; 152}; 153 |
|
76&i2c0 { 77 status = "okay"; | 154&i2c0 { 155 status = "okay"; |
156 157 ina220@40 { 158 compatible = "ti,ina220"; 159 reg = <0x40>; 160 shunt-resistor = <1000>; 161 }; 162 163 ina220@41 { 164 compatible = "ti,ina220"; 165 reg = <0x41>; 166 shunt-resistor = <1000>; 167 }; 168 |
|
78}; 79 80&i2c1 { 81 status = "okay"; | 169}; 170 171&i2c1 { 172 status = "okay"; |
173 codec: sgtl5000@a { 174 #sound-dai-cells = <0>; 175 compatible = "fsl,sgtl5000"; 176 reg = <0x0a>; 177 VDDA-supply = <®_3p3v>; 178 VDDIO-supply = <®_3p3v>; 179 clocks = <&sys_mclk 1>; 180 }; |
|
82}; 83 84&ifc { 85 #address-cells = <2>; 86 #size-cells = <1>; 87 /* NOR Flash on board */ 88 ranges = <0x0 0x0 0x0 0x60000000 0x08000000>; 89 status = "okay"; --- 23 unchanged lines hidden (view full) --- 113 reg = <0x2>; 114 }; 115 tbi1: tbi-phy@1f { 116 reg = <0x1f>; 117 device_type = "tbi-phy"; 118 }; 119}; 120 | 181}; 182 183&ifc { 184 #address-cells = <2>; 185 #size-cells = <1>; 186 /* NOR Flash on board */ 187 ranges = <0x0 0x0 0x0 0x60000000 0x08000000>; 188 status = "okay"; --- 23 unchanged lines hidden (view full) --- 212 reg = <0x2>; 213 }; 214 tbi1: tbi-phy@1f { 215 reg = <0x1f>; 216 device_type = "tbi-phy"; 217 }; 218}; 219 |
220&sai1 { 221 status = "okay"; 222}; 223 224&sata { 225 status = "okay"; 226}; 227 |
|
121&uart0 { 122 status = "okay"; 123}; 124 125&uart1 { 126 status = "okay"; 127}; | 228&uart0 { 229 status = "okay"; 230}; 231 232&uart1 { 233 status = "okay"; 234}; |