1/* 2 * Copyright 2013 Crystalfontz America, Inc. 3 * Copyright 2012 Free Electrons 4 * 5 * The code contained herein is licensed under the GNU General Public 6 * License. You may obtain a copy of the GNU General Public License 7 * Version 2 or later at the following locations: 8 * 9 * http://www.opensource.org/licenses/gpl-license.html 10 * http://www.gnu.org/copyleft/gpl.html 11 */ 12 13/* 14 * The CFA-10057 is an expansion board for the CFA-10036 module, thus we 15 * need to include the CFA-10036 DTS. 16 */ 17#include "imx28-cfa10036.dts" 18 19/ { 20 model = "Crystalfontz CFA-10057 Board"; 21 compatible = "crystalfontz,cfa10057", "crystalfontz,cfa10036", "fsl,imx28"; 22 23 apb@80000000 { 24 apbh@80000000 { 25 pinctrl@80018000 { 26 usb_pins_cfa10057: usb-10057@0 { 27 reg = <0>; 28 fsl,pinmux-ids = < 29 MX28_PAD_GPMI_D07__GPIO_0_7 30 >; 31 fsl,drive-strength = <MXS_DRIVE_4mA>; 32 fsl,voltage = <MXS_VOLTAGE_HIGH>; 33 fsl,pull-up = <MXS_PULL_DISABLE>; 34 }; 35 36 lcdif_18bit_pins_cfa10057: lcdif-18bit@0 { 37 reg = <0>; 38 fsl,pinmux-ids = < 39 MX28_PAD_LCD_D00__LCD_D0 40 MX28_PAD_LCD_D01__LCD_D1 41 MX28_PAD_LCD_D02__LCD_D2 42 MX28_PAD_LCD_D03__LCD_D3 43 MX28_PAD_LCD_D04__LCD_D4 44 MX28_PAD_LCD_D05__LCD_D5 45 MX28_PAD_LCD_D06__LCD_D6 46 MX28_PAD_LCD_D07__LCD_D7 47 MX28_PAD_LCD_D08__LCD_D8 48 MX28_PAD_LCD_D09__LCD_D9 49 MX28_PAD_LCD_D10__LCD_D10 50 MX28_PAD_LCD_D11__LCD_D11 51 MX28_PAD_LCD_D12__LCD_D12 52 MX28_PAD_LCD_D13__LCD_D13 53 MX28_PAD_LCD_D14__LCD_D14 54 MX28_PAD_LCD_D15__LCD_D15 55 MX28_PAD_LCD_D16__LCD_D16 56 MX28_PAD_LCD_D17__LCD_D17 57 >; 58 fsl,drive-strength = <MXS_DRIVE_4mA>; 59 fsl,voltage = <MXS_VOLTAGE_HIGH>; 60 fsl,pull-up = <MXS_PULL_DISABLE>; 61 }; 62 63 lcdif_pins_cfa10057: lcdif-evk@0 { 64 reg = <0>; 65 fsl,pinmux-ids = < 66 MX28_PAD_LCD_RD_E__LCD_VSYNC 67 MX28_PAD_LCD_WR_RWN__LCD_HSYNC 68 MX28_PAD_LCD_RS__LCD_DOTCLK 69 MX28_PAD_LCD_CS__LCD_ENABLE 70 >; 71 fsl,drive-strength = <MXS_DRIVE_4mA>; 72 fsl,voltage = <MXS_VOLTAGE_HIGH>; 73 fsl,pull-up = <MXS_PULL_DISABLE>; 74 }; 75 }; 76 77 lcdif@80030000 { 78 pinctrl-names = "default"; 79 pinctrl-0 = <&lcdif_18bit_pins_cfa10057 80 &lcdif_pins_cfa10057>; 81 display = <&display0>; 82 status = "okay"; 83 84 display0: display0 { 85 bits-per-pixel = <32>; 86 bus-width = <18>; 87 88 display-timings { 89 native-mode = <&timing0>; 90 timing0: timing0 { 91 clock-frequency = <30000000>; 92 hactive = <480>; 93 vactive = <800>; 94 hfront-porch = <12>; 95 hback-porch = <2>; 96 vfront-porch = <5>; 97 vback-porch = <3>; 98 hsync-len = <2>; 99 vsync-len = <2>; 100 hsync-active = <0>; 101 vsync-active = <0>; 102 de-active = <1>; 103 pixelclk-active = <1>; 104 }; 105 }; 106 }; 107 }; 108 }; 109 110 apbx@80040000 { 111 lradc@80050000 { 112 fsl,lradc-touchscreen-wires = <4>; 113 status = "okay"; 114 }; 115 116 pwm: pwm@80064000 { 117 pinctrl-names = "default";
| 1/* 2 * Copyright 2013 Crystalfontz America, Inc. 3 * Copyright 2012 Free Electrons 4 * 5 * The code contained herein is licensed under the GNU General Public 6 * License. You may obtain a copy of the GNU General Public License 7 * Version 2 or later at the following locations: 8 * 9 * http://www.opensource.org/licenses/gpl-license.html 10 * http://www.gnu.org/copyleft/gpl.html 11 */ 12 13/* 14 * The CFA-10057 is an expansion board for the CFA-10036 module, thus we 15 * need to include the CFA-10036 DTS. 16 */ 17#include "imx28-cfa10036.dts" 18 19/ { 20 model = "Crystalfontz CFA-10057 Board"; 21 compatible = "crystalfontz,cfa10057", "crystalfontz,cfa10036", "fsl,imx28"; 22 23 apb@80000000 { 24 apbh@80000000 { 25 pinctrl@80018000 { 26 usb_pins_cfa10057: usb-10057@0 { 27 reg = <0>; 28 fsl,pinmux-ids = < 29 MX28_PAD_GPMI_D07__GPIO_0_7 30 >; 31 fsl,drive-strength = <MXS_DRIVE_4mA>; 32 fsl,voltage = <MXS_VOLTAGE_HIGH>; 33 fsl,pull-up = <MXS_PULL_DISABLE>; 34 }; 35 36 lcdif_18bit_pins_cfa10057: lcdif-18bit@0 { 37 reg = <0>; 38 fsl,pinmux-ids = < 39 MX28_PAD_LCD_D00__LCD_D0 40 MX28_PAD_LCD_D01__LCD_D1 41 MX28_PAD_LCD_D02__LCD_D2 42 MX28_PAD_LCD_D03__LCD_D3 43 MX28_PAD_LCD_D04__LCD_D4 44 MX28_PAD_LCD_D05__LCD_D5 45 MX28_PAD_LCD_D06__LCD_D6 46 MX28_PAD_LCD_D07__LCD_D7 47 MX28_PAD_LCD_D08__LCD_D8 48 MX28_PAD_LCD_D09__LCD_D9 49 MX28_PAD_LCD_D10__LCD_D10 50 MX28_PAD_LCD_D11__LCD_D11 51 MX28_PAD_LCD_D12__LCD_D12 52 MX28_PAD_LCD_D13__LCD_D13 53 MX28_PAD_LCD_D14__LCD_D14 54 MX28_PAD_LCD_D15__LCD_D15 55 MX28_PAD_LCD_D16__LCD_D16 56 MX28_PAD_LCD_D17__LCD_D17 57 >; 58 fsl,drive-strength = <MXS_DRIVE_4mA>; 59 fsl,voltage = <MXS_VOLTAGE_HIGH>; 60 fsl,pull-up = <MXS_PULL_DISABLE>; 61 }; 62 63 lcdif_pins_cfa10057: lcdif-evk@0 { 64 reg = <0>; 65 fsl,pinmux-ids = < 66 MX28_PAD_LCD_RD_E__LCD_VSYNC 67 MX28_PAD_LCD_WR_RWN__LCD_HSYNC 68 MX28_PAD_LCD_RS__LCD_DOTCLK 69 MX28_PAD_LCD_CS__LCD_ENABLE 70 >; 71 fsl,drive-strength = <MXS_DRIVE_4mA>; 72 fsl,voltage = <MXS_VOLTAGE_HIGH>; 73 fsl,pull-up = <MXS_PULL_DISABLE>; 74 }; 75 }; 76 77 lcdif@80030000 { 78 pinctrl-names = "default"; 79 pinctrl-0 = <&lcdif_18bit_pins_cfa10057 80 &lcdif_pins_cfa10057>; 81 display = <&display0>; 82 status = "okay"; 83 84 display0: display0 { 85 bits-per-pixel = <32>; 86 bus-width = <18>; 87 88 display-timings { 89 native-mode = <&timing0>; 90 timing0: timing0 { 91 clock-frequency = <30000000>; 92 hactive = <480>; 93 vactive = <800>; 94 hfront-porch = <12>; 95 hback-porch = <2>; 96 vfront-porch = <5>; 97 vback-porch = <3>; 98 hsync-len = <2>; 99 vsync-len = <2>; 100 hsync-active = <0>; 101 vsync-active = <0>; 102 de-active = <1>; 103 pixelclk-active = <1>; 104 }; 105 }; 106 }; 107 }; 108 }; 109 110 apbx@80040000 { 111 lradc@80050000 { 112 fsl,lradc-touchscreen-wires = <4>; 113 status = "okay"; 114 }; 115 116 pwm: pwm@80064000 { 117 pinctrl-names = "default";
|
119 status = "okay"; 120 }; 121 122 i2c1: i2c@8005a000 { 123 pinctrl-names = "default"; 124 pinctrl-0 = <&i2c1_pins_a>; 125 status = "okay"; 126 }; 127 128 usbphy1: usbphy@8007e000 { 129 status = "okay"; 130 }; 131 }; 132 }; 133 134 ahb@80080000 { 135 usb1: usb@80090000 { 136 vbus-supply = <®_usb1_vbus>; 137 pinctrl-0 = <&usb1_pins_a>; 138 pinctrl-names = "default"; 139 status = "okay"; 140 }; 141 }; 142 143 regulators { 144 compatible = "simple-bus"; 145 #address-cells = <1>; 146 #size-cells = <0>; 147 148 reg_usb1_vbus: regulator@0 { 149 compatible = "regulator-fixed"; 150 reg = <0>; 151 pinctrl-names = "default"; 152 pinctrl-0 = <&usb_pins_cfa10057>; 153 regulator-name = "usb1_vbus"; 154 regulator-min-microvolt = <5000000>; 155 regulator-max-microvolt = <5000000>; 156 gpio = <&gpio0 7 1>; 157 }; 158 }; 159 160 ahb@80080000 { 161 mac0: ethernet@800f0000 { 162 phy-mode = "rmii"; 163 pinctrl-names = "default"; 164 pinctrl-0 = <&mac0_pins_a>; 165 phy-reset-gpios = <&gpio2 21 0>; 166 phy-reset-duration = <100>; 167 status = "okay"; 168 }; 169 }; 170 171 backlight { 172 compatible = "pwm-backlight";
| 119 status = "okay"; 120 }; 121 122 i2c1: i2c@8005a000 { 123 pinctrl-names = "default"; 124 pinctrl-0 = <&i2c1_pins_a>; 125 status = "okay"; 126 }; 127 128 usbphy1: usbphy@8007e000 { 129 status = "okay"; 130 }; 131 }; 132 }; 133 134 ahb@80080000 { 135 usb1: usb@80090000 { 136 vbus-supply = <®_usb1_vbus>; 137 pinctrl-0 = <&usb1_pins_a>; 138 pinctrl-names = "default"; 139 status = "okay"; 140 }; 141 }; 142 143 regulators { 144 compatible = "simple-bus"; 145 #address-cells = <1>; 146 #size-cells = <0>; 147 148 reg_usb1_vbus: regulator@0 { 149 compatible = "regulator-fixed"; 150 reg = <0>; 151 pinctrl-names = "default"; 152 pinctrl-0 = <&usb_pins_cfa10057>; 153 regulator-name = "usb1_vbus"; 154 regulator-min-microvolt = <5000000>; 155 regulator-max-microvolt = <5000000>; 156 gpio = <&gpio0 7 1>; 157 }; 158 }; 159 160 ahb@80080000 { 161 mac0: ethernet@800f0000 { 162 phy-mode = "rmii"; 163 pinctrl-names = "default"; 164 pinctrl-0 = <&mac0_pins_a>; 165 phy-reset-gpios = <&gpio2 21 0>; 166 phy-reset-duration = <100>; 167 status = "okay"; 168 }; 169 }; 170 171 backlight { 172 compatible = "pwm-backlight";
|