1/*
2 * Samsung's Exynos4210 based Universal C210 board device tree source
3 *
4 * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
5 * http://www.samsung.com
6 *
7 * Device tree source file for Samsung's Universal C210 board which is based on
8 * Samsung's Exynos4210 rev0 SoC.
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
13*/
14
15/dts-v1/;
16#include "exynos4210.dtsi"
17
18/ {
19 model = "Samsung Universal C210 based on Exynos4210 rev0";
20 compatible = "samsung,universal_c210", "samsung,exynos4210", "samsung,exynos4";
21
22 memory {
23 reg = <0x40000000 0x10000000
24 0x50000000 0x10000000>;
--- 35 unchanged lines hidden (view full) ---
60 };
61 };
62
63 vemmc_reg: voltage-regulator {
64 compatible = "regulator-fixed";
65 regulator-name = "VMEM_VDD_2_8V";
66 regulator-min-microvolt = <2800000>;
67 regulator-max-microvolt = <2800000>;
68 gpio = <&gpe1 3 0>;
69 enable-active-high;
70 };
71
72 hsotg@12480000 {
73 vusb_d-supply = <&ldo3_reg>;
74 vusb_a-supply = <&ldo8_reg>;
75 dr_mode = "peripheral";
76 status = "okay";
77 };
78
79 sdhci_emmc: sdhci@12510000 {
80 bus-width = <8>;
81 non-removable;
82 pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>;
83 pinctrl-names = "default";
84 vmmc-supply = <&vemmc_reg>;
85 status = "okay";
86 };
87
88 sdhci_sd: sdhci@12530000 {
89 bus-width = <4>;
90 pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
91 pinctrl-names = "default";
92 vmmc-supply = <&ldo5_reg>;
93 cd-gpios = <&gpx3 4 0>;
94 cd-inverted;
95 status = "okay";
96 };
97
98 ehci@12580000 {
99 status = "okay";
100 port@0 {
101 status = "okay";
102 };
103 };
104
105 ohci@12590000 {
106 status = "okay";
107 port@0 {
108 status = "okay";
109 };
110 };
111
112 exynos-usbphy@125B0000 {
113 status = "okay";
114 };
115
116 serial@13800000 {
117 status = "okay";
118 };
119
120 serial@13810000 {
121 status = "okay";
122 };
123
124 serial@13820000 {
125 status = "okay";
126 };
127
128 serial@13830000 {
129 status = "okay";
130 };
131
132 gpio-keys {
133 compatible = "gpio-keys";
134
135 vol-up-key {
136 gpios = <&gpx2 0 1>;
137 linux,code = <115>;
138 label = "volume up";
139 debounce-interval = <1>;
140 };
141
142 vol-down-key {
143 gpios = <&gpx2 1 1>;
144 linux,code = <114>;
145 label = "volume down";
146 debounce-interval = <1>;
147 };
148
149 config-key {
150 gpios = <&gpx2 2 1>;
151 linux,code = <171>;
152 label = "config";
153 debounce-interval = <1>;
154 gpio-key,wakeup;
155 };
156
157 camera-key {
158 gpios = <&gpx2 3 1>;
159 linux,code = <212>;
160 label = "camera";
161 debounce-interval = <1>;
162 };
163
164 power-key {
165 gpios = <&gpx2 7 1>;
166 linux,code = <116>;
167 label = "power";
168 debounce-interval = <1>;
169 gpio-key,wakeup;
170 };
171
172 ok-key {
173 gpios = <&gpx3 5 1>;
174 linux,code = <352>;
175 label = "ok";
176 debounce-interval = <1>;
177 };
178 };
179
180 tsp_reg: voltage-regulator {
181 compatible = "regulator-fixed";
182 regulator-name = "TSP_2_8V";
183 regulator-min-microvolt = <2800000>;
184 regulator-max-microvolt = <2800000>;
185 gpio = <&gpe2 3 0>;
186 enable-active-high;
187 };
188
189 i2c@13890000 {
190 samsung,i2c-sda-delay = <100>;
191 samsung,i2c-slave-addr = <0x10>;
192 samsung,i2c-max-bus-freq = <100000>;
193 pinctrl-0 = <&i2c3_bus>;
194 pinctrl-names = "default";
195 status = "okay";
196
197 tsp@4a {
198 /* TBD: Atmel maXtouch touchscreen */
199 reg = <0x4a>;
200 };
201 };
202
203 i2c@138B0000 {
204 samsung,i2c-sda-delay = <100>;
205 samsung,i2c-slave-addr = <0x10>;
206 samsung,i2c-max-bus-freq = <100000>;
207 pinctrl-0 = <&i2c5_bus>;
208 pinctrl-names = "default";
209 status = "okay";
210
211 vdd_arm_reg: pmic@60 {
212 compatible = "maxim,max8952";
213 reg = <0x60>;
214
215 max8952,vid-gpios = <&gpx0 3 0>, <&gpx0 4 0>;
216 max8952,default-mode = <0>;
217 max8952,dvs-mode-microvolt = <1250000>, <1200000>,
218 <1050000>, <950000>;
219 max8952,sync-freq = <0>;
220 max8952,ramp-speed = <0>;
221
222 regulator-name = "vdd_arm";
223 regulator-min-microvolt = <770000>;
224 regulator-max-microvolt = <1400000>;
225 regulator-always-on;
226 regulator-boot-on;
227 };
228
229 pmic@66 {
230 compatible = "national,lp3974";
231 reg = <0x66>;
232
233 max8998,pmic-buck1-default-dvs-idx = <0>;
234 max8998,pmic-buck1-dvs-gpios = <&gpx0 5 0>,
235 <&gpx0 6 0>;
236 max8998,pmic-buck1-dvs-voltage = <1100000>, <1000000>,
237 <1100000>, <1000000>;
238
239 max8998,pmic-buck2-default-dvs-idx = <0>;
240 max8998,pmic-buck2-dvs-gpio = <&gpe2 0 0>;
241 max8998,pmic-buck2-dvs-voltage = <1200000>, <1100000>;
242
243 regulators {
244 ldo2_reg: LDO2 {
245 regulator-name = "VALIVE_1.2V";
246 regulator-min-microvolt = <1200000>;
247 regulator-max-microvolt = <1200000>;
248 regulator-always-on;
249 };
250
251 ldo3_reg: LDO3 {
252 regulator-name = "VUSB+MIPI_1.1V";
253 regulator-min-microvolt = <1100000>;
254 regulator-max-microvolt = <1100000>;
255 regulator-always-on;
256 };
257
258 ldo4_reg: LDO4 {
259 regulator-name = "VADC_3.3V";
260 regulator-min-microvolt = <3300000>;
261 regulator-max-microvolt = <3300000>;
262 };
263
264 ldo5_reg: LDO5 {
265 regulator-name = "VTF_2.8V";
266 regulator-min-microvolt = <2800000>;
267 regulator-max-microvolt = <2800000>;
268 };
269
270 ldo6_reg: LDO6 {
271 regulator-name = "LDO6";
272 regulator-min-microvolt = <2000000>;
273 regulator-max-microvolt = <2000000>;
274 };
275
276 ldo7_reg: LDO7 {
277 regulator-name = "VLCD+VMIPI_1.8V";
278 regulator-min-microvolt = <1800000>;
279 regulator-max-microvolt = <1800000>;
280 };
281
282 ldo8_reg: LDO8 {
283 regulator-name = "VUSB+VDAC_3.3V";
284 regulator-min-microvolt = <3300000>;
285 regulator-max-microvolt = <3300000>;
286 regulator-always-on;
287 };
288
289 ldo9_reg: LDO9 {
290 regulator-name = "VCC_2.8V";
291 regulator-min-microvolt = <2800000>;
292 regulator-max-microvolt = <2800000>;
293 regulator-always-on;
294 };
295
296 ldo10_reg: LDO10 {
297 regulator-name = "VPLL_1.1V";
298 regulator-min-microvolt = <1100000>;
299 regulator-max-microvolt = <1100000>;
300 regulator-boot-on;
301 regulator-always-on;
302 };
303
304 ldo11_reg: LDO11 {
305 regulator-name = "CAM_AF_3.3V";
306 regulator-min-microvolt = <3300000>;
307 regulator-max-microvolt = <3300000>;
308 };
309
310 ldo12_reg: LDO12 {
311 regulator-name = "PS_2.8V";
312 regulator-min-microvolt = <2800000>;
313 regulator-max-microvolt = <2800000>;
314 };
315
316 ldo13_reg: LDO13 {
317 regulator-name = "VHIC_1.2V";
318 regulator-min-microvolt = <1200000>;
319 regulator-max-microvolt = <1200000>;
320 };
321
322 ldo14_reg: LDO14 {
323 regulator-name = "CAM_I_HOST_1.8V";
324 regulator-min-microvolt = <1800000>;
325 regulator-max-microvolt = <1800000>;
326 };
327
328 ldo15_reg: LDO15 {
329 regulator-name = "CAM_S_DIG+FM33_CORE_1.2V";
330 regulator-min-microvolt = <1200000>;
331 regulator-max-microvolt = <1200000>;
332 };
333
334 ldo16_reg: LDO16 {
335 regulator-name = "CAM_S_ANA_2.8V";
336 regulator-min-microvolt = <2800000>;
337 regulator-max-microvolt = <2800000>;
338 };
339
340 ldo17_reg: LDO17 {
341 regulator-name = "VCC_3.0V_LCD";
342 regulator-min-microvolt = <3000000>;
343 regulator-max-microvolt = <3000000>;
344 };
345
346 buck1_reg: BUCK1 {
347 regulator-name = "VINT_1.1V";
348 regulator-min-microvolt = <750000>;
349 regulator-max-microvolt = <1500000>;
350 regulator-boot-on;
351 regulator-always-on;
352 };
353
354 buck2_reg: BUCK2 {
355 regulator-name = "VG3D_1.1V";
356 regulator-min-microvolt = <750000>;
357 regulator-max-microvolt = <1500000>;
358 regulator-boot-on;
359 };
360
361 buck3_reg: BUCK3 {
362 regulator-name = "VCC_1.8V";
363 regulator-min-microvolt = <1800000>;
364 regulator-max-microvolt = <1800000>;
365 regulator-always-on;
366 };
367
368 buck4_reg: BUCK4 {
369 regulator-name = "VMEM_1.2V";
370 regulator-min-microvolt = <1200000>;
371 regulator-max-microvolt = <1200000>;
372 regulator-always-on;
373 };
374
375 ap32khz_reg: EN32KHz-AP {
376 regulator-name = "32KHz AP";
377 regulator-always-on;
378 };
379
380 cp32khz_reg: EN32KHz-CP {
381 regulator-name = "32KHz CP";
382 };
383
384 vichg_reg: ENVICHG {
385 regulator-name = "VICHG";
386 };
387
388 safeout1_reg: ESAFEOUT1 {
389 regulator-name = "SAFEOUT1";
390 regulator-always-on;
391 };
392
393 safeout2_reg: ESAFEOUT2 {
394 regulator-name = "SAFEOUT2";
395 regulator-boot-on;
396 };
397 };
398 };
399 };
400
401 spi-lcd {
402 compatible = "spi-gpio";
403 #address-cells = <1>;
404 #size-cells = <0>;
405
406 gpio-sck = <&gpy3 1 0>;
407 gpio-mosi = <&gpy3 3 0>;
408 num-chipselects = <1>;
409 cs-gpios = <&gpy4 3 0>;
410
411 lcd@0 {
412 compatible = "samsung,ld9040";
413 reg = <0>;
414 vdd3-supply = <&ldo7_reg>;
415 vci-supply = <&ldo17_reg>;
416 reset-gpios = <&gpy4 5 0>;
417 spi-max-frequency = <1200000>;
418 spi-cpol;
419 spi-cpha;
420 power-on-delay = <10>;
421 reset-delay = <10>;
422 panel-width-mm = <90>;
423 panel-height-mm = <154>;
424 display-timings {
--- 16 unchanged lines hidden (view full) ---
441 port {
442 lcd_ep: endpoint {
443 remote-endpoint = <&fimd_dpi_ep>;
444 };
445 };
446 };
447 };
448
449 fimd: fimd@11c00000 {
450 pinctrl-0 = <&lcd_clk>, <&lcd_data24>;
451 pinctrl-names = "default";
452 status = "okay";
453 samsung,invert-vden;
454 samsung,invert-vclk;
455 #address-cells = <1>;
456 #size-cells = <0>;
457 port@3 {
458 reg = <3>;
459 fimd_dpi_ep: endpoint {
460 remote-endpoint = <&lcd_ep>;
461 };
462 };
463 };
464
465 pwm@139D0000 {
466 compatible = "samsung,s5p6440-pwm";
467 status = "okay";
468 };
469
470 camera {
471 status = "okay";
472
473 pinctrl-names = "default";
474 pinctrl-0 = <>;
475
476 fimc_0: fimc@11800000 {
477 status = "okay";
--- 22 unchanged lines hidden (view full) ---
500 fimc_3: fimc@11830000 {
501 status = "okay";
502 assigned-clocks = <&clock CLK_MOUT_FIMC3>,
503 <&clock CLK_SCLK_FIMC3>;
504 assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
505 assigned-clock-rates = <0>, <160000000>;
506 };
507 };
508};
509
510&mdma1 {
511 reg = <0x12840000 0x1000>;
512};
2 * Samsung's Exynos4210 based Universal C210 board device tree source
3 *
4 * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
5 * http://www.samsung.com
6 *
7 * Device tree source file for Samsung's Universal C210 board which is based on
8 * Samsung's Exynos4210 rev0 SoC.
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
13*/
14
15/dts-v1/;
16#include "exynos4210.dtsi"
17
18/ {
19 model = "Samsung Universal C210 based on Exynos4210 rev0";
20 compatible = "samsung,universal_c210", "samsung,exynos4210", "samsung,exynos4";
21
22 memory {
23 reg = <0x40000000 0x10000000
24 0x50000000 0x10000000>;
--- 35 unchanged lines hidden (view full) ---
60 };
61 };
62
63 vemmc_reg: voltage-regulator {
64 compatible = "regulator-fixed";
65 regulator-name = "VMEM_VDD_2_8V";
66 regulator-min-microvolt = <2800000>;
67 regulator-max-microvolt = <2800000>;
68 gpio = <&gpe1 3 0>;
69 enable-active-high;
70 };
71
72 hsotg@12480000 {
73 vusb_d-supply = <&ldo3_reg>;
74 vusb_a-supply = <&ldo8_reg>;
75 dr_mode = "peripheral";
76 status = "okay";
77 };
78
79 sdhci_emmc: sdhci@12510000 {
80 bus-width = <8>;
81 non-removable;
82 pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>;
83 pinctrl-names = "default";
84 vmmc-supply = <&vemmc_reg>;
85 status = "okay";
86 };
87
88 sdhci_sd: sdhci@12530000 {
89 bus-width = <4>;
90 pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
91 pinctrl-names = "default";
92 vmmc-supply = <&ldo5_reg>;
93 cd-gpios = <&gpx3 4 0>;
94 cd-inverted;
95 status = "okay";
96 };
97
98 ehci@12580000 {
99 status = "okay";
100 port@0 {
101 status = "okay";
102 };
103 };
104
105 ohci@12590000 {
106 status = "okay";
107 port@0 {
108 status = "okay";
109 };
110 };
111
112 exynos-usbphy@125B0000 {
113 status = "okay";
114 };
115
116 serial@13800000 {
117 status = "okay";
118 };
119
120 serial@13810000 {
121 status = "okay";
122 };
123
124 serial@13820000 {
125 status = "okay";
126 };
127
128 serial@13830000 {
129 status = "okay";
130 };
131
132 gpio-keys {
133 compatible = "gpio-keys";
134
135 vol-up-key {
136 gpios = <&gpx2 0 1>;
137 linux,code = <115>;
138 label = "volume up";
139 debounce-interval = <1>;
140 };
141
142 vol-down-key {
143 gpios = <&gpx2 1 1>;
144 linux,code = <114>;
145 label = "volume down";
146 debounce-interval = <1>;
147 };
148
149 config-key {
150 gpios = <&gpx2 2 1>;
151 linux,code = <171>;
152 label = "config";
153 debounce-interval = <1>;
154 gpio-key,wakeup;
155 };
156
157 camera-key {
158 gpios = <&gpx2 3 1>;
159 linux,code = <212>;
160 label = "camera";
161 debounce-interval = <1>;
162 };
163
164 power-key {
165 gpios = <&gpx2 7 1>;
166 linux,code = <116>;
167 label = "power";
168 debounce-interval = <1>;
169 gpio-key,wakeup;
170 };
171
172 ok-key {
173 gpios = <&gpx3 5 1>;
174 linux,code = <352>;
175 label = "ok";
176 debounce-interval = <1>;
177 };
178 };
179
180 tsp_reg: voltage-regulator {
181 compatible = "regulator-fixed";
182 regulator-name = "TSP_2_8V";
183 regulator-min-microvolt = <2800000>;
184 regulator-max-microvolt = <2800000>;
185 gpio = <&gpe2 3 0>;
186 enable-active-high;
187 };
188
189 i2c@13890000 {
190 samsung,i2c-sda-delay = <100>;
191 samsung,i2c-slave-addr = <0x10>;
192 samsung,i2c-max-bus-freq = <100000>;
193 pinctrl-0 = <&i2c3_bus>;
194 pinctrl-names = "default";
195 status = "okay";
196
197 tsp@4a {
198 /* TBD: Atmel maXtouch touchscreen */
199 reg = <0x4a>;
200 };
201 };
202
203 i2c@138B0000 {
204 samsung,i2c-sda-delay = <100>;
205 samsung,i2c-slave-addr = <0x10>;
206 samsung,i2c-max-bus-freq = <100000>;
207 pinctrl-0 = <&i2c5_bus>;
208 pinctrl-names = "default";
209 status = "okay";
210
211 vdd_arm_reg: pmic@60 {
212 compatible = "maxim,max8952";
213 reg = <0x60>;
214
215 max8952,vid-gpios = <&gpx0 3 0>, <&gpx0 4 0>;
216 max8952,default-mode = <0>;
217 max8952,dvs-mode-microvolt = <1250000>, <1200000>,
218 <1050000>, <950000>;
219 max8952,sync-freq = <0>;
220 max8952,ramp-speed = <0>;
221
222 regulator-name = "vdd_arm";
223 regulator-min-microvolt = <770000>;
224 regulator-max-microvolt = <1400000>;
225 regulator-always-on;
226 regulator-boot-on;
227 };
228
229 pmic@66 {
230 compatible = "national,lp3974";
231 reg = <0x66>;
232
233 max8998,pmic-buck1-default-dvs-idx = <0>;
234 max8998,pmic-buck1-dvs-gpios = <&gpx0 5 0>,
235 <&gpx0 6 0>;
236 max8998,pmic-buck1-dvs-voltage = <1100000>, <1000000>,
237 <1100000>, <1000000>;
238
239 max8998,pmic-buck2-default-dvs-idx = <0>;
240 max8998,pmic-buck2-dvs-gpio = <&gpe2 0 0>;
241 max8998,pmic-buck2-dvs-voltage = <1200000>, <1100000>;
242
243 regulators {
244 ldo2_reg: LDO2 {
245 regulator-name = "VALIVE_1.2V";
246 regulator-min-microvolt = <1200000>;
247 regulator-max-microvolt = <1200000>;
248 regulator-always-on;
249 };
250
251 ldo3_reg: LDO3 {
252 regulator-name = "VUSB+MIPI_1.1V";
253 regulator-min-microvolt = <1100000>;
254 regulator-max-microvolt = <1100000>;
255 regulator-always-on;
256 };
257
258 ldo4_reg: LDO4 {
259 regulator-name = "VADC_3.3V";
260 regulator-min-microvolt = <3300000>;
261 regulator-max-microvolt = <3300000>;
262 };
263
264 ldo5_reg: LDO5 {
265 regulator-name = "VTF_2.8V";
266 regulator-min-microvolt = <2800000>;
267 regulator-max-microvolt = <2800000>;
268 };
269
270 ldo6_reg: LDO6 {
271 regulator-name = "LDO6";
272 regulator-min-microvolt = <2000000>;
273 regulator-max-microvolt = <2000000>;
274 };
275
276 ldo7_reg: LDO7 {
277 regulator-name = "VLCD+VMIPI_1.8V";
278 regulator-min-microvolt = <1800000>;
279 regulator-max-microvolt = <1800000>;
280 };
281
282 ldo8_reg: LDO8 {
283 regulator-name = "VUSB+VDAC_3.3V";
284 regulator-min-microvolt = <3300000>;
285 regulator-max-microvolt = <3300000>;
286 regulator-always-on;
287 };
288
289 ldo9_reg: LDO9 {
290 regulator-name = "VCC_2.8V";
291 regulator-min-microvolt = <2800000>;
292 regulator-max-microvolt = <2800000>;
293 regulator-always-on;
294 };
295
296 ldo10_reg: LDO10 {
297 regulator-name = "VPLL_1.1V";
298 regulator-min-microvolt = <1100000>;
299 regulator-max-microvolt = <1100000>;
300 regulator-boot-on;
301 regulator-always-on;
302 };
303
304 ldo11_reg: LDO11 {
305 regulator-name = "CAM_AF_3.3V";
306 regulator-min-microvolt = <3300000>;
307 regulator-max-microvolt = <3300000>;
308 };
309
310 ldo12_reg: LDO12 {
311 regulator-name = "PS_2.8V";
312 regulator-min-microvolt = <2800000>;
313 regulator-max-microvolt = <2800000>;
314 };
315
316 ldo13_reg: LDO13 {
317 regulator-name = "VHIC_1.2V";
318 regulator-min-microvolt = <1200000>;
319 regulator-max-microvolt = <1200000>;
320 };
321
322 ldo14_reg: LDO14 {
323 regulator-name = "CAM_I_HOST_1.8V";
324 regulator-min-microvolt = <1800000>;
325 regulator-max-microvolt = <1800000>;
326 };
327
328 ldo15_reg: LDO15 {
329 regulator-name = "CAM_S_DIG+FM33_CORE_1.2V";
330 regulator-min-microvolt = <1200000>;
331 regulator-max-microvolt = <1200000>;
332 };
333
334 ldo16_reg: LDO16 {
335 regulator-name = "CAM_S_ANA_2.8V";
336 regulator-min-microvolt = <2800000>;
337 regulator-max-microvolt = <2800000>;
338 };
339
340 ldo17_reg: LDO17 {
341 regulator-name = "VCC_3.0V_LCD";
342 regulator-min-microvolt = <3000000>;
343 regulator-max-microvolt = <3000000>;
344 };
345
346 buck1_reg: BUCK1 {
347 regulator-name = "VINT_1.1V";
348 regulator-min-microvolt = <750000>;
349 regulator-max-microvolt = <1500000>;
350 regulator-boot-on;
351 regulator-always-on;
352 };
353
354 buck2_reg: BUCK2 {
355 regulator-name = "VG3D_1.1V";
356 regulator-min-microvolt = <750000>;
357 regulator-max-microvolt = <1500000>;
358 regulator-boot-on;
359 };
360
361 buck3_reg: BUCK3 {
362 regulator-name = "VCC_1.8V";
363 regulator-min-microvolt = <1800000>;
364 regulator-max-microvolt = <1800000>;
365 regulator-always-on;
366 };
367
368 buck4_reg: BUCK4 {
369 regulator-name = "VMEM_1.2V";
370 regulator-min-microvolt = <1200000>;
371 regulator-max-microvolt = <1200000>;
372 regulator-always-on;
373 };
374
375 ap32khz_reg: EN32KHz-AP {
376 regulator-name = "32KHz AP";
377 regulator-always-on;
378 };
379
380 cp32khz_reg: EN32KHz-CP {
381 regulator-name = "32KHz CP";
382 };
383
384 vichg_reg: ENVICHG {
385 regulator-name = "VICHG";
386 };
387
388 safeout1_reg: ESAFEOUT1 {
389 regulator-name = "SAFEOUT1";
390 regulator-always-on;
391 };
392
393 safeout2_reg: ESAFEOUT2 {
394 regulator-name = "SAFEOUT2";
395 regulator-boot-on;
396 };
397 };
398 };
399 };
400
401 spi-lcd {
402 compatible = "spi-gpio";
403 #address-cells = <1>;
404 #size-cells = <0>;
405
406 gpio-sck = <&gpy3 1 0>;
407 gpio-mosi = <&gpy3 3 0>;
408 num-chipselects = <1>;
409 cs-gpios = <&gpy4 3 0>;
410
411 lcd@0 {
412 compatible = "samsung,ld9040";
413 reg = <0>;
414 vdd3-supply = <&ldo7_reg>;
415 vci-supply = <&ldo17_reg>;
416 reset-gpios = <&gpy4 5 0>;
417 spi-max-frequency = <1200000>;
418 spi-cpol;
419 spi-cpha;
420 power-on-delay = <10>;
421 reset-delay = <10>;
422 panel-width-mm = <90>;
423 panel-height-mm = <154>;
424 display-timings {
--- 16 unchanged lines hidden (view full) ---
441 port {
442 lcd_ep: endpoint {
443 remote-endpoint = <&fimd_dpi_ep>;
444 };
445 };
446 };
447 };
448
449 fimd: fimd@11c00000 {
450 pinctrl-0 = <&lcd_clk>, <&lcd_data24>;
451 pinctrl-names = "default";
452 status = "okay";
453 samsung,invert-vden;
454 samsung,invert-vclk;
455 #address-cells = <1>;
456 #size-cells = <0>;
457 port@3 {
458 reg = <3>;
459 fimd_dpi_ep: endpoint {
460 remote-endpoint = <&lcd_ep>;
461 };
462 };
463 };
464
465 pwm@139D0000 {
466 compatible = "samsung,s5p6440-pwm";
467 status = "okay";
468 };
469
470 camera {
471 status = "okay";
472
473 pinctrl-names = "default";
474 pinctrl-0 = <>;
475
476 fimc_0: fimc@11800000 {
477 status = "okay";
--- 22 unchanged lines hidden (view full) ---
500 fimc_3: fimc@11830000 {
501 status = "okay";
502 assigned-clocks = <&clock CLK_MOUT_FIMC3>,
503 <&clock CLK_SCLK_FIMC3>;
504 assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
505 assigned-clock-rates = <0>, <160000000>;
506 };
507 };
508};
509
510&mdma1 {
511 reg = <0x12840000 0x1000>;
512};