1/*
2 * Samsung's Exynos4210 based Universal C210 board device tree source
3 *
4 * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
5 * http://www.samsung.com
6 *
7 * Device tree source file for Samsung's Universal C210 board which is based on
8 * Samsung's Exynos4210 rev0 SoC.
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
13*/
14
15/dts-v1/;
16#include "exynos4210.dtsi"
17#include <dt-bindings/gpio/gpio.h>
18
19/ {
20 model = "Samsung Universal C210 based on Exynos4210 rev0";
21 compatible = "samsung,universal_c210", "samsung,exynos4210", "samsung,exynos4";
22
23 memory {
24 reg = <0x40000000 0x10000000
25 0x50000000 0x10000000>;
--- 35 unchanged lines hidden (view full) ---
61 };
62 };
63
64 vemmc_reg: voltage-regulator {
65 compatible = "regulator-fixed";
66 regulator-name = "VMEM_VDD_2_8V";
67 regulator-min-microvolt = <2800000>;
68 regulator-max-microvolt = <2800000>;
69 gpio = <&gpe1 3 GPIO_ACTIVE_HIGH>;
70 enable-active-high;
71 };
72
73 gpio-keys {
74 compatible = "gpio-keys";
75
76 vol-up-key {
77 gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
78 linux,code = <115>;
79 label = "volume up";
80 debounce-interval = <1>;
81 };
82
83 vol-down-key {
84 gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
85 linux,code = <114>;
86 label = "volume down";
87 debounce-interval = <1>;
88 };
89
90 config-key {
91 gpios = <&gpx2 2 GPIO_ACTIVE_LOW>;
92 linux,code = <171>;
93 label = "config";
94 debounce-interval = <1>;
95 gpio-key,wakeup;
96 };
97
98 camera-key {
99 gpios = <&gpx2 3 GPIO_ACTIVE_LOW>;
100 linux,code = <212>;
101 label = "camera";
102 debounce-interval = <1>;
103 };
104
105 power-key {
106 gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
107 linux,code = <116>;
108 label = "power";
109 debounce-interval = <1>;
110 gpio-key,wakeup;
111 };
112
113 ok-key {
114 gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
115 linux,code = <352>;
116 label = "ok";
117 debounce-interval = <1>;
118 };
119 };
120
121 tsp_reg: voltage-regulator {
122 compatible = "regulator-fixed";
123 regulator-name = "TSP_2_8V";
124 regulator-min-microvolt = <2800000>;
125 regulator-max-microvolt = <2800000>;
126 gpio = <&gpe2 3 GPIO_ACTIVE_HIGH>;
127 enable-active-high;
128 };
129
130 spi-lcd {
131 compatible = "spi-gpio";
132 #address-cells = <1>;
133 #size-cells = <0>;
134
135 gpio-sck = <&gpy3 1 GPIO_ACTIVE_HIGH>;
136 gpio-mosi = <&gpy3 3 GPIO_ACTIVE_HIGH>;
137 num-chipselects = <1>;
138 cs-gpios = <&gpy4 3 GPIO_ACTIVE_HIGH>;
139
140 lcd@0 {
141 compatible = "samsung,ld9040";
142 reg = <0>;
143 vdd3-supply = <&ldo7_reg>;
144 vci-supply = <&ldo17_reg>;
145 reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>;
146 spi-max-frequency = <1200000>;
147 spi-cpol;
148 spi-cpha;
149 power-on-delay = <10>;
150 reset-delay = <10>;
151 panel-width-mm = <90>;
152 panel-height-mm = <154>;
153 display-timings {
--- 16 unchanged lines hidden (view full) ---
170 port {
171 lcd_ep: endpoint {
172 remote-endpoint = <&fimd_dpi_ep>;
173 };
174 };
175 };
176 };
177
178 camera {
179 status = "okay";
180
181 pinctrl-names = "default";
182 pinctrl-0 = <>;
183
184 fimc_0: fimc@11800000 {
185 status = "okay";
--- 22 unchanged lines hidden (view full) ---
208 fimc_3: fimc@11830000 {
209 status = "okay";
210 assigned-clocks = <&clock CLK_MOUT_FIMC3>,
211 <&clock CLK_SCLK_FIMC3>;
212 assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
213 assigned-clock-rates = <0>, <160000000>;
214 };
215 };
216
217 hdmi_en: voltage-regulator-hdmi-5v {
218 compatible = "regulator-fixed";
219 regulator-name = "HDMI_5V";
220 regulator-min-microvolt = <5000000>;
221 regulator-max-microvolt = <5000000>;
222 gpio = <&gpe0 1 GPIO_ACTIVE_HIGH>;
223 enable-active-high;
224 };
225
226 hdmi_ddc: i2c-ddc {
227 compatible = "i2c-gpio";
228 gpios = <&gpe4 2 GPIO_ACTIVE_HIGH &gpe4 3 GPIO_ACTIVE_HIGH>;
229 i2c-gpio,delay-us = <100>;
230 #address-cells = <1>;
231 #size-cells = <0>;
232
233 pinctrl-0 = <&i2c_ddc_bus>;
234 pinctrl-names = "default";
235 status = "okay";
236 };
237};
238
239&cpu0 {
240 cpu0-supply = <&vdd_arm_reg>;
241};
242
243&ehci {
244 status = "okay";
245 port@0 {
246 status = "okay";
247 };
248};
249
250&exynos_usbphy {
251 status = "okay";
252 vbus-supply = <&safeout1_reg>;
253};
254
255&fimd {
256 pinctrl-0 = <&lcd_clk>, <&lcd_data24>;
257 pinctrl-names = "default";
258 status = "okay";
259 samsung,invert-vden;
260 samsung,invert-vclk;
261 #address-cells = <1>;
262 #size-cells = <0>;
263 port@3 {
264 reg = <3>;
265 fimd_dpi_ep: endpoint {
266 remote-endpoint = <&lcd_ep>;
267 };
268 };
269};
270
271&hdmi {
272 hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
273 pinctrl-names = "default";
274 pinctrl-0 = <&hdmi_hpd>;
275 hdmi-en-supply = <&hdmi_en>;
276 vdd-supply = <&ldo3_reg>;
277 vdd_osc-supply = <&ldo4_reg>;
278 vdd_pll-supply = <&ldo3_reg>;
279 ddc = <&hdmi_ddc>;
280 status = "okay";
281};
282
283&hsotg {
284 vusb_d-supply = <&ldo3_reg>;
285 vusb_a-supply = <&ldo8_reg>;
286 dr_mode = "peripheral";
287 status = "okay";
288};
289
290&i2c_3 {
291 samsung,i2c-sda-delay = <100>;
292 samsung,i2c-slave-addr = <0x10>;
293 samsung,i2c-max-bus-freq = <100000>;
294 pinctrl-0 = <&i2c3_bus>;
295 pinctrl-names = "default";
296 status = "okay";
297
298 tsp@4a {
299 /* TBD: Atmel maXtouch touchscreen */
300 reg = <0x4a>;
301 };
302};
303
304&i2c_5 {
305 samsung,i2c-sda-delay = <100>;
306 samsung,i2c-slave-addr = <0x10>;
307 samsung,i2c-max-bus-freq = <100000>;
308 pinctrl-0 = <&i2c5_bus>;
309 pinctrl-names = "default";
310 status = "okay";
311
312 vdd_arm_reg: pmic@60 {
313 compatible = "maxim,max8952";
314 reg = <0x60>;
315
316 max8952,vid-gpios = <&gpx0 3 GPIO_ACTIVE_HIGH>,
317 <&gpx0 4 GPIO_ACTIVE_HIGH>;
318 max8952,default-mode = <0>;
319 max8952,dvs-mode-microvolt = <1250000>, <1200000>,
320 <1050000>, <950000>;
321 max8952,sync-freq = <0>;
322 max8952,ramp-speed = <0>;
323
324 regulator-name = "vdd_arm";
325 regulator-min-microvolt = <770000>;
326 regulator-max-microvolt = <1400000>;
327 regulator-always-on;
328 regulator-boot-on;
329 };
330
331 pmic@66 {
332 compatible = "national,lp3974";
333 reg = <0x66>;
334
335 max8998,pmic-buck1-default-dvs-idx = <0>;
336 max8998,pmic-buck1-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>,
337 <&gpx0 6 GPIO_ACTIVE_HIGH>;
338 max8998,pmic-buck1-dvs-voltage = <1100000>, <1000000>,
339 <1100000>, <1000000>;
340
341 max8998,pmic-buck2-default-dvs-idx = <0>;
342 max8998,pmic-buck2-dvs-gpio = <&gpe2 0 GPIO_ACTIVE_HIGH>;
343 max8998,pmic-buck2-dvs-voltage = <1200000>, <1100000>;
344
345 regulators {
346 ldo2_reg: LDO2 {
347 regulator-name = "VALIVE_1.2V";
348 regulator-min-microvolt = <1200000>;
349 regulator-max-microvolt = <1200000>;
350 regulator-always-on;
351 };
352
353 ldo3_reg: LDO3 {
354 regulator-name = "VUSB+MIPI_1.1V";
355 regulator-min-microvolt = <1100000>;
356 regulator-max-microvolt = <1100000>;
357 regulator-always-on;
358 };
359
360 ldo4_reg: LDO4 {
361 regulator-name = "VADC_3.3V";
362 regulator-min-microvolt = <3300000>;
363 regulator-max-microvolt = <3300000>;
364 };
365
366 ldo5_reg: LDO5 {
367 regulator-name = "VTF_2.8V";
368 regulator-min-microvolt = <2800000>;
369 regulator-max-microvolt = <2800000>;
370 };
371
372 ldo6_reg: LDO6 {
373 regulator-name = "LDO6";
374 regulator-min-microvolt = <2000000>;
375 regulator-max-microvolt = <2000000>;
376 };
377
378 ldo7_reg: LDO7 {
379 regulator-name = "VLCD+VMIPI_1.8V";
380 regulator-min-microvolt = <1800000>;
381 regulator-max-microvolt = <1800000>;
382 };
383
384 ldo8_reg: LDO8 {
385 regulator-name = "VUSB+VDAC_3.3V";
386 regulator-min-microvolt = <3300000>;
387 regulator-max-microvolt = <3300000>;
388 regulator-always-on;
389 };
390
391 ldo9_reg: LDO9 {
392 regulator-name = "VCC_2.8V";
393 regulator-min-microvolt = <2800000>;
394 regulator-max-microvolt = <2800000>;
395 regulator-always-on;
396 };
397
398 ldo10_reg: LDO10 {
399 regulator-name = "VPLL_1.1V";
400 regulator-min-microvolt = <1100000>;
401 regulator-max-microvolt = <1100000>;
402 regulator-boot-on;
403 regulator-always-on;
404 };
405
406 ldo11_reg: LDO11 {
407 regulator-name = "CAM_AF_3.3V";
408 regulator-min-microvolt = <3300000>;
409 regulator-max-microvolt = <3300000>;
410 };
411
412 ldo12_reg: LDO12 {
413 regulator-name = "PS_2.8V";
414 regulator-min-microvolt = <2800000>;
415 regulator-max-microvolt = <2800000>;
416 };
417
418 ldo13_reg: LDO13 {
419 regulator-name = "VHIC_1.2V";
420 regulator-min-microvolt = <1200000>;
421 regulator-max-microvolt = <1200000>;
422 };
423
424 ldo14_reg: LDO14 {
425 regulator-name = "CAM_I_HOST_1.8V";
426 regulator-min-microvolt = <1800000>;
427 regulator-max-microvolt = <1800000>;
428 };
429
430 ldo15_reg: LDO15 {
431 regulator-name = "CAM_S_DIG+FM33_CORE_1.2V";
432 regulator-min-microvolt = <1200000>;
433 regulator-max-microvolt = <1200000>;
434 };
435
436 ldo16_reg: LDO16 {
437 regulator-name = "CAM_S_ANA_2.8V";
438 regulator-min-microvolt = <2800000>;
439 regulator-max-microvolt = <2800000>;
440 };
441
442 ldo17_reg: LDO17 {
443 regulator-name = "VCC_3.0V_LCD";
444 regulator-min-microvolt = <3000000>;
445 regulator-max-microvolt = <3000000>;
446 };
447
448 buck1_reg: BUCK1 {
449 regulator-name = "VINT_1.1V";
450 regulator-min-microvolt = <750000>;
451 regulator-max-microvolt = <1500000>;
452 regulator-boot-on;
453 regulator-always-on;
454 };
455
456 buck2_reg: BUCK2 {
457 regulator-name = "VG3D_1.1V";
458 regulator-min-microvolt = <750000>;
459 regulator-max-microvolt = <1500000>;
460 regulator-boot-on;
461 };
462
463 buck3_reg: BUCK3 {
464 regulator-name = "VCC_1.8V";
465 regulator-min-microvolt = <1800000>;
466 regulator-max-microvolt = <1800000>;
467 regulator-always-on;
468 };
469
470 buck4_reg: BUCK4 {
471 regulator-name = "VMEM_1.2V";
472 regulator-min-microvolt = <1200000>;
473 regulator-max-microvolt = <1200000>;
474 regulator-always-on;
475 };
476
477 ap32khz_reg: EN32KHz-AP {
478 regulator-name = "32KHz AP";
479 regulator-always-on;
480 };
481
482 cp32khz_reg: EN32KHz-CP {
483 regulator-name = "32KHz CP";
484 };
485
486 vichg_reg: ENVICHG {
487 regulator-name = "VICHG";
488 };
489
490 safeout1_reg: ESAFEOUT1 {
491 regulator-name = "SAFEOUT1";
492 };
493
494 safeout2_reg: ESAFEOUT2 {
495 regulator-name = "SAFEOUT2";
496 regulator-boot-on;
497 };
498 };
499 };
500};
501
502&i2c_8 {
503 status = "okay";
504};
505
506&mdma1 {
507 reg = <0x12840000 0x1000>;
508};
509
510&mixer {
511 status = "okay";
512};
513
514&ohci {
515 status = "okay";
516 port@0 {
517 status = "okay";
518 };
519};
520
521&pinctrl_1 {
522 hdmi_hpd: hdmi-hpd {
523 samsung,pins = "gpx3-7";
524 samsung,pin-pud = <0>;
525 };
526};
527
528&pinctrl_0 {
529 i2c_ddc_bus: i2c-ddc-bus {
530 samsung,pins = "gpe4-2", "gpe4-3";
531 samsung,pin-function = <2>;
532 samsung,pin-pud = <3>;
533 samsung,pin-drv = <0>;
534 };
535};
536
537&pwm {
538 compatible = "samsung,s5p6440-pwm";
539 status = "okay";
540};
541
542&sdhci_0 {
543 bus-width = <8>;
544 non-removable;
545 pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>;
546 pinctrl-names = "default";
547 vmmc-supply = <&vemmc_reg>;
548 status = "okay";
549};
550
551&sdhci_2 {
552 bus-width = <4>;
553 pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
554 pinctrl-names = "default";
555 vmmc-supply = <&ldo5_reg>;
556 cd-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>;
557 cd-inverted;
558 status = "okay";
559};
560
561&serial_0 {
562 status = "okay";
563 /delete-property/dmas;
564 /delete-property/dma-names;
565};
566
567&serial_1 {
568 status = "okay";
569 /delete-property/dmas;
570 /delete-property/dma-names;
571};
572
573&serial_2 {
574 status = "okay";
575 /delete-property/dmas;
576 /delete-property/dma-names;
577};
578
579&serial_3 {
580 status = "okay";
581 /delete-property/dmas;
582 /delete-property/dma-names;
583};
2 * Samsung's Exynos4210 based Universal C210 board device tree source
3 *
4 * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
5 * http://www.samsung.com
6 *
7 * Device tree source file for Samsung's Universal C210 board which is based on
8 * Samsung's Exynos4210 rev0 SoC.
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
13*/
14
15/dts-v1/;
16#include "exynos4210.dtsi"
17#include <dt-bindings/gpio/gpio.h>
18
19/ {
20 model = "Samsung Universal C210 based on Exynos4210 rev0";
21 compatible = "samsung,universal_c210", "samsung,exynos4210", "samsung,exynos4";
22
23 memory {
24 reg = <0x40000000 0x10000000
25 0x50000000 0x10000000>;
--- 35 unchanged lines hidden (view full) ---
61 };
62 };
63
64 vemmc_reg: voltage-regulator {
65 compatible = "regulator-fixed";
66 regulator-name = "VMEM_VDD_2_8V";
67 regulator-min-microvolt = <2800000>;
68 regulator-max-microvolt = <2800000>;
69 gpio = <&gpe1 3 GPIO_ACTIVE_HIGH>;
70 enable-active-high;
71 };
72
73 gpio-keys {
74 compatible = "gpio-keys";
75
76 vol-up-key {
77 gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
78 linux,code = <115>;
79 label = "volume up";
80 debounce-interval = <1>;
81 };
82
83 vol-down-key {
84 gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
85 linux,code = <114>;
86 label = "volume down";
87 debounce-interval = <1>;
88 };
89
90 config-key {
91 gpios = <&gpx2 2 GPIO_ACTIVE_LOW>;
92 linux,code = <171>;
93 label = "config";
94 debounce-interval = <1>;
95 gpio-key,wakeup;
96 };
97
98 camera-key {
99 gpios = <&gpx2 3 GPIO_ACTIVE_LOW>;
100 linux,code = <212>;
101 label = "camera";
102 debounce-interval = <1>;
103 };
104
105 power-key {
106 gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
107 linux,code = <116>;
108 label = "power";
109 debounce-interval = <1>;
110 gpio-key,wakeup;
111 };
112
113 ok-key {
114 gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
115 linux,code = <352>;
116 label = "ok";
117 debounce-interval = <1>;
118 };
119 };
120
121 tsp_reg: voltage-regulator {
122 compatible = "regulator-fixed";
123 regulator-name = "TSP_2_8V";
124 regulator-min-microvolt = <2800000>;
125 regulator-max-microvolt = <2800000>;
126 gpio = <&gpe2 3 GPIO_ACTIVE_HIGH>;
127 enable-active-high;
128 };
129
130 spi-lcd {
131 compatible = "spi-gpio";
132 #address-cells = <1>;
133 #size-cells = <0>;
134
135 gpio-sck = <&gpy3 1 GPIO_ACTIVE_HIGH>;
136 gpio-mosi = <&gpy3 3 GPIO_ACTIVE_HIGH>;
137 num-chipselects = <1>;
138 cs-gpios = <&gpy4 3 GPIO_ACTIVE_HIGH>;
139
140 lcd@0 {
141 compatible = "samsung,ld9040";
142 reg = <0>;
143 vdd3-supply = <&ldo7_reg>;
144 vci-supply = <&ldo17_reg>;
145 reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>;
146 spi-max-frequency = <1200000>;
147 spi-cpol;
148 spi-cpha;
149 power-on-delay = <10>;
150 reset-delay = <10>;
151 panel-width-mm = <90>;
152 panel-height-mm = <154>;
153 display-timings {
--- 16 unchanged lines hidden (view full) ---
170 port {
171 lcd_ep: endpoint {
172 remote-endpoint = <&fimd_dpi_ep>;
173 };
174 };
175 };
176 };
177
178 camera {
179 status = "okay";
180
181 pinctrl-names = "default";
182 pinctrl-0 = <>;
183
184 fimc_0: fimc@11800000 {
185 status = "okay";
--- 22 unchanged lines hidden (view full) ---
208 fimc_3: fimc@11830000 {
209 status = "okay";
210 assigned-clocks = <&clock CLK_MOUT_FIMC3>,
211 <&clock CLK_SCLK_FIMC3>;
212 assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
213 assigned-clock-rates = <0>, <160000000>;
214 };
215 };
216
217 hdmi_en: voltage-regulator-hdmi-5v {
218 compatible = "regulator-fixed";
219 regulator-name = "HDMI_5V";
220 regulator-min-microvolt = <5000000>;
221 regulator-max-microvolt = <5000000>;
222 gpio = <&gpe0 1 GPIO_ACTIVE_HIGH>;
223 enable-active-high;
224 };
225
226 hdmi_ddc: i2c-ddc {
227 compatible = "i2c-gpio";
228 gpios = <&gpe4 2 GPIO_ACTIVE_HIGH &gpe4 3 GPIO_ACTIVE_HIGH>;
229 i2c-gpio,delay-us = <100>;
230 #address-cells = <1>;
231 #size-cells = <0>;
232
233 pinctrl-0 = <&i2c_ddc_bus>;
234 pinctrl-names = "default";
235 status = "okay";
236 };
237};
238
239&cpu0 {
240 cpu0-supply = <&vdd_arm_reg>;
241};
242
243&ehci {
244 status = "okay";
245 port@0 {
246 status = "okay";
247 };
248};
249
250&exynos_usbphy {
251 status = "okay";
252 vbus-supply = <&safeout1_reg>;
253};
254
255&fimd {
256 pinctrl-0 = <&lcd_clk>, <&lcd_data24>;
257 pinctrl-names = "default";
258 status = "okay";
259 samsung,invert-vden;
260 samsung,invert-vclk;
261 #address-cells = <1>;
262 #size-cells = <0>;
263 port@3 {
264 reg = <3>;
265 fimd_dpi_ep: endpoint {
266 remote-endpoint = <&lcd_ep>;
267 };
268 };
269};
270
271&hdmi {
272 hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
273 pinctrl-names = "default";
274 pinctrl-0 = <&hdmi_hpd>;
275 hdmi-en-supply = <&hdmi_en>;
276 vdd-supply = <&ldo3_reg>;
277 vdd_osc-supply = <&ldo4_reg>;
278 vdd_pll-supply = <&ldo3_reg>;
279 ddc = <&hdmi_ddc>;
280 status = "okay";
281};
282
283&hsotg {
284 vusb_d-supply = <&ldo3_reg>;
285 vusb_a-supply = <&ldo8_reg>;
286 dr_mode = "peripheral";
287 status = "okay";
288};
289
290&i2c_3 {
291 samsung,i2c-sda-delay = <100>;
292 samsung,i2c-slave-addr = <0x10>;
293 samsung,i2c-max-bus-freq = <100000>;
294 pinctrl-0 = <&i2c3_bus>;
295 pinctrl-names = "default";
296 status = "okay";
297
298 tsp@4a {
299 /* TBD: Atmel maXtouch touchscreen */
300 reg = <0x4a>;
301 };
302};
303
304&i2c_5 {
305 samsung,i2c-sda-delay = <100>;
306 samsung,i2c-slave-addr = <0x10>;
307 samsung,i2c-max-bus-freq = <100000>;
308 pinctrl-0 = <&i2c5_bus>;
309 pinctrl-names = "default";
310 status = "okay";
311
312 vdd_arm_reg: pmic@60 {
313 compatible = "maxim,max8952";
314 reg = <0x60>;
315
316 max8952,vid-gpios = <&gpx0 3 GPIO_ACTIVE_HIGH>,
317 <&gpx0 4 GPIO_ACTIVE_HIGH>;
318 max8952,default-mode = <0>;
319 max8952,dvs-mode-microvolt = <1250000>, <1200000>,
320 <1050000>, <950000>;
321 max8952,sync-freq = <0>;
322 max8952,ramp-speed = <0>;
323
324 regulator-name = "vdd_arm";
325 regulator-min-microvolt = <770000>;
326 regulator-max-microvolt = <1400000>;
327 regulator-always-on;
328 regulator-boot-on;
329 };
330
331 pmic@66 {
332 compatible = "national,lp3974";
333 reg = <0x66>;
334
335 max8998,pmic-buck1-default-dvs-idx = <0>;
336 max8998,pmic-buck1-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>,
337 <&gpx0 6 GPIO_ACTIVE_HIGH>;
338 max8998,pmic-buck1-dvs-voltage = <1100000>, <1000000>,
339 <1100000>, <1000000>;
340
341 max8998,pmic-buck2-default-dvs-idx = <0>;
342 max8998,pmic-buck2-dvs-gpio = <&gpe2 0 GPIO_ACTIVE_HIGH>;
343 max8998,pmic-buck2-dvs-voltage = <1200000>, <1100000>;
344
345 regulators {
346 ldo2_reg: LDO2 {
347 regulator-name = "VALIVE_1.2V";
348 regulator-min-microvolt = <1200000>;
349 regulator-max-microvolt = <1200000>;
350 regulator-always-on;
351 };
352
353 ldo3_reg: LDO3 {
354 regulator-name = "VUSB+MIPI_1.1V";
355 regulator-min-microvolt = <1100000>;
356 regulator-max-microvolt = <1100000>;
357 regulator-always-on;
358 };
359
360 ldo4_reg: LDO4 {
361 regulator-name = "VADC_3.3V";
362 regulator-min-microvolt = <3300000>;
363 regulator-max-microvolt = <3300000>;
364 };
365
366 ldo5_reg: LDO5 {
367 regulator-name = "VTF_2.8V";
368 regulator-min-microvolt = <2800000>;
369 regulator-max-microvolt = <2800000>;
370 };
371
372 ldo6_reg: LDO6 {
373 regulator-name = "LDO6";
374 regulator-min-microvolt = <2000000>;
375 regulator-max-microvolt = <2000000>;
376 };
377
378 ldo7_reg: LDO7 {
379 regulator-name = "VLCD+VMIPI_1.8V";
380 regulator-min-microvolt = <1800000>;
381 regulator-max-microvolt = <1800000>;
382 };
383
384 ldo8_reg: LDO8 {
385 regulator-name = "VUSB+VDAC_3.3V";
386 regulator-min-microvolt = <3300000>;
387 regulator-max-microvolt = <3300000>;
388 regulator-always-on;
389 };
390
391 ldo9_reg: LDO9 {
392 regulator-name = "VCC_2.8V";
393 regulator-min-microvolt = <2800000>;
394 regulator-max-microvolt = <2800000>;
395 regulator-always-on;
396 };
397
398 ldo10_reg: LDO10 {
399 regulator-name = "VPLL_1.1V";
400 regulator-min-microvolt = <1100000>;
401 regulator-max-microvolt = <1100000>;
402 regulator-boot-on;
403 regulator-always-on;
404 };
405
406 ldo11_reg: LDO11 {
407 regulator-name = "CAM_AF_3.3V";
408 regulator-min-microvolt = <3300000>;
409 regulator-max-microvolt = <3300000>;
410 };
411
412 ldo12_reg: LDO12 {
413 regulator-name = "PS_2.8V";
414 regulator-min-microvolt = <2800000>;
415 regulator-max-microvolt = <2800000>;
416 };
417
418 ldo13_reg: LDO13 {
419 regulator-name = "VHIC_1.2V";
420 regulator-min-microvolt = <1200000>;
421 regulator-max-microvolt = <1200000>;
422 };
423
424 ldo14_reg: LDO14 {
425 regulator-name = "CAM_I_HOST_1.8V";
426 regulator-min-microvolt = <1800000>;
427 regulator-max-microvolt = <1800000>;
428 };
429
430 ldo15_reg: LDO15 {
431 regulator-name = "CAM_S_DIG+FM33_CORE_1.2V";
432 regulator-min-microvolt = <1200000>;
433 regulator-max-microvolt = <1200000>;
434 };
435
436 ldo16_reg: LDO16 {
437 regulator-name = "CAM_S_ANA_2.8V";
438 regulator-min-microvolt = <2800000>;
439 regulator-max-microvolt = <2800000>;
440 };
441
442 ldo17_reg: LDO17 {
443 regulator-name = "VCC_3.0V_LCD";
444 regulator-min-microvolt = <3000000>;
445 regulator-max-microvolt = <3000000>;
446 };
447
448 buck1_reg: BUCK1 {
449 regulator-name = "VINT_1.1V";
450 regulator-min-microvolt = <750000>;
451 regulator-max-microvolt = <1500000>;
452 regulator-boot-on;
453 regulator-always-on;
454 };
455
456 buck2_reg: BUCK2 {
457 regulator-name = "VG3D_1.1V";
458 regulator-min-microvolt = <750000>;
459 regulator-max-microvolt = <1500000>;
460 regulator-boot-on;
461 };
462
463 buck3_reg: BUCK3 {
464 regulator-name = "VCC_1.8V";
465 regulator-min-microvolt = <1800000>;
466 regulator-max-microvolt = <1800000>;
467 regulator-always-on;
468 };
469
470 buck4_reg: BUCK4 {
471 regulator-name = "VMEM_1.2V";
472 regulator-min-microvolt = <1200000>;
473 regulator-max-microvolt = <1200000>;
474 regulator-always-on;
475 };
476
477 ap32khz_reg: EN32KHz-AP {
478 regulator-name = "32KHz AP";
479 regulator-always-on;
480 };
481
482 cp32khz_reg: EN32KHz-CP {
483 regulator-name = "32KHz CP";
484 };
485
486 vichg_reg: ENVICHG {
487 regulator-name = "VICHG";
488 };
489
490 safeout1_reg: ESAFEOUT1 {
491 regulator-name = "SAFEOUT1";
492 };
493
494 safeout2_reg: ESAFEOUT2 {
495 regulator-name = "SAFEOUT2";
496 regulator-boot-on;
497 };
498 };
499 };
500};
501
502&i2c_8 {
503 status = "okay";
504};
505
506&mdma1 {
507 reg = <0x12840000 0x1000>;
508};
509
510&mixer {
511 status = "okay";
512};
513
514&ohci {
515 status = "okay";
516 port@0 {
517 status = "okay";
518 };
519};
520
521&pinctrl_1 {
522 hdmi_hpd: hdmi-hpd {
523 samsung,pins = "gpx3-7";
524 samsung,pin-pud = <0>;
525 };
526};
527
528&pinctrl_0 {
529 i2c_ddc_bus: i2c-ddc-bus {
530 samsung,pins = "gpe4-2", "gpe4-3";
531 samsung,pin-function = <2>;
532 samsung,pin-pud = <3>;
533 samsung,pin-drv = <0>;
534 };
535};
536
537&pwm {
538 compatible = "samsung,s5p6440-pwm";
539 status = "okay";
540};
541
542&sdhci_0 {
543 bus-width = <8>;
544 non-removable;
545 pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>;
546 pinctrl-names = "default";
547 vmmc-supply = <&vemmc_reg>;
548 status = "okay";
549};
550
551&sdhci_2 {
552 bus-width = <4>;
553 pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
554 pinctrl-names = "default";
555 vmmc-supply = <&ldo5_reg>;
556 cd-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>;
557 cd-inverted;
558 status = "okay";
559};
560
561&serial_0 {
562 status = "okay";
563 /delete-property/dmas;
564 /delete-property/dma-names;
565};
566
567&serial_1 {
568 status = "okay";
569 /delete-property/dmas;
570 /delete-property/dma-names;
571};
572
573&serial_2 {
574 status = "okay";
575 /delete-property/dmas;
576 /delete-property/dma-names;
577};
578
579&serial_3 {
580 status = "okay";
581 /delete-property/dmas;
582 /delete-property/dma-names;
583};