1/* 2 * Samsung's Exynos4210 based Trats board device tree source 3 * 4 * Copyright (c) 2012 Samsung Electronics Co., Ltd. 5 * http://www.samsung.com 6 * 7 * Device tree source file for Samsung's Trats board which is based on 8 * Samsung's Exynos4210 SoC. 9 * 10 * This program is free software; you can redistribute it and/or modify 11 * it under the terms of the GNU General Public License version 2 as 12 * published by the Free Software Foundation. 13*/ 14 15/dts-v1/; 16#include "exynos4210.dtsi" |
17#include <dt-bindings/gpio/gpio.h> |
18 19/ { 20 model = "Samsung Trats based on Exynos4210"; 21 compatible = "samsung,trats", "samsung,exynos4210", "samsung,exynos4"; 22 23 memory { 24 reg = <0x40000000 0x10000000 25 0x50000000 0x10000000 --- 9 unchanged lines hidden (view full) --- 35 regulators { 36 compatible = "simple-bus"; 37 38 vemmc_reg: regulator-0 { 39 compatible = "regulator-fixed"; 40 regulator-name = "VMEM_VDD_2.8V"; 41 regulator-min-microvolt = <2800000>; 42 regulator-max-microvolt = <2800000>; |
43 gpio = <&gpk0 2 GPIO_ACTIVE_HIGH>; |
44 enable-active-high; 45 }; 46 47 tsp_reg: regulator-1 { 48 compatible = "regulator-fixed"; 49 regulator-name = "TSP_FIXED_VOLTAGES"; 50 regulator-min-microvolt = <2800000>; 51 regulator-max-microvolt = <2800000>; |
52 gpio = <&gpl0 3 GPIO_ACTIVE_HIGH>; |
53 enable-active-high; 54 }; 55 56 cam_af_28v_reg: regulator-2 { 57 compatible = "regulator-fixed"; 58 regulator-name = "8M_AF_2.8V_EN"; 59 regulator-min-microvolt = <2800000>; 60 regulator-max-microvolt = <2800000>; |
61 gpio = <&gpk1 1 GPIO_ACTIVE_HIGH>; |
62 enable-active-high; 63 }; 64 65 cam_io_en_reg: regulator-3 { 66 compatible = "regulator-fixed"; 67 regulator-name = "CAM_IO_EN"; 68 regulator-min-microvolt = <2800000>; 69 regulator-max-microvolt = <2800000>; |
70 gpio = <&gpe2 1 GPIO_ACTIVE_HIGH>; |
71 enable-active-high; 72 }; 73 74 cam_io_12v_reg: regulator-4 { 75 compatible = "regulator-fixed"; 76 regulator-name = "8M_1.2V_EN"; 77 regulator-min-microvolt = <1200000>; 78 regulator-max-microvolt = <1200000>; |
79 gpio = <&gpe2 5 GPIO_ACTIVE_HIGH>; |
80 enable-active-high; 81 }; 82 83 vt_core_15v_reg: regulator-5 { 84 compatible = "regulator-fixed"; 85 regulator-name = "VT_CORE_1.5V"; 86 regulator-min-microvolt = <1500000>; 87 regulator-max-microvolt = <1500000>; |
88 gpio = <&gpe2 2 GPIO_ACTIVE_HIGH>; |
89 enable-active-high; 90 }; 91 }; 92 |
93 gpio-keys { 94 compatible = "gpio-keys"; 95 96 vol-down-key { |
97 gpios = <&gpx2 1 GPIO_ACTIVE_LOW>; |
98 linux,code = <114>; 99 label = "volume down"; 100 debounce-interval = <10>; 101 }; 102 103 vol-up-key { |
104 gpios = <&gpx2 0 GPIO_ACTIVE_LOW>; |
105 linux,code = <115>; 106 label = "volume up"; 107 debounce-interval = <10>; 108 }; 109 110 power-key { |
111 gpios = <&gpx2 7 GPIO_ACTIVE_LOW>; |
112 linux,code = <116>; 113 label = "power"; 114 debounce-interval = <10>; 115 gpio-key,wakeup; 116 }; 117 118 ok-key { |
119 gpios = <&gpx3 5 GPIO_ACTIVE_LOW>; |
120 linux,code = <352>; 121 label = "ok"; 122 debounce-interval = <10>; 123 }; 124 }; 125 |
126 fixed-rate-clocks { 127 xxti { 128 compatible = "samsung,clock-xxti"; 129 clock-frequency = <0>; 130 }; |
131 |
132 xusbxti { 133 compatible = "samsung,clock-xusbxti"; 134 clock-frequency = <24000000>; |
135 }; 136 }; 137 |
138 thermal-zones { 139 cpu_thermal: cpu-thermal { 140 cooling-maps { 141 map0 { 142 /* Corresponds to 800MHz at freq_table */ 143 cooling-device = <&cpu0 2 2>; 144 }; 145 map1 { 146 /* Corresponds to 200MHz at freq_table */ 147 cooling-device = <&cpu0 4 4>; 148 }; 149 }; 150 }; 151 }; 152 153 camera { |
154 pinctrl-names = "default"; |
155 pinctrl-0 = <>; |
156 status = "okay"; 157 |
158 fimc_0: fimc@11800000 { 159 status = "okay"; 160 assigned-clocks = <&clock CLK_MOUT_FIMC0>, 161 <&clock CLK_SCLK_FIMC0>; 162 assigned-clock-parents = <&clock CLK_SCLK_MPLL>; 163 assigned-clock-rates = <0>, <160000000>; 164 }; |
165 |
166 fimc_1: fimc@11810000 { 167 status = "okay"; 168 assigned-clocks = <&clock CLK_MOUT_FIMC1>, 169 <&clock CLK_SCLK_FIMC1>; 170 assigned-clock-parents = <&clock CLK_SCLK_MPLL>; 171 assigned-clock-rates = <0>, <160000000>; 172 }; |
173 |
174 fimc_2: fimc@11820000 { 175 status = "okay"; 176 assigned-clocks = <&clock CLK_MOUT_FIMC2>, 177 <&clock CLK_SCLK_FIMC2>; 178 assigned-clock-parents = <&clock CLK_SCLK_MPLL>; 179 assigned-clock-rates = <0>, <160000000>; 180 }; |
181 |
182 fimc_3: fimc@11830000 { 183 status = "okay"; 184 assigned-clocks = <&clock CLK_MOUT_FIMC3>, 185 <&clock CLK_SCLK_FIMC3>; 186 assigned-clock-parents = <&clock CLK_SCLK_MPLL>; 187 assigned-clock-rates = <0>, <160000000>; 188 }; 189 }; 190}; |
191 |
192&cpu0 { 193 cpu0-supply = <&varm_breg>; 194}; |
195 |
196&dsi_0 { 197 vddcore-supply = <&vusb_reg>; 198 vddio-supply = <&vmipi_reg>; 199 samsung,pll-clock-frequency = <24000000>; 200 status = "okay"; |
201 |
202 ports { 203 #address-cells = <1>; 204 #size-cells = <0>; |
205 |
206 port@1 { 207 reg = <1>; |
208 |
209 dsi_out: endpoint { 210 remote-endpoint = <&dsi_in>; 211 samsung,burst-clock-frequency = <500000000>; 212 samsung,esc-clock-frequency = <20000000>; 213 }; 214 }; 215 }; |
216 |
217 panel@0 { 218 reg = <0>; 219 compatible = "samsung,s6e8aa0"; 220 vdd3-supply = <&vcclcd_reg>; 221 vci-supply = <&vlcd_reg>; 222 reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>; 223 power-on-delay= <50>; 224 reset-delay = <100>; 225 init-delay = <100>; 226 flip-horizontal; 227 flip-vertical; 228 panel-width-mm = <58>; 229 panel-height-mm = <103>; |
230 |
231 display-timings { 232 timing-0 { 233 clock-frequency = <57153600>; 234 hactive = <720>; 235 vactive = <1280>; 236 hfront-porch = <5>; 237 hback-porch = <5>; 238 hsync-len = <5>; 239 vfront-porch = <13>; 240 vback-porch = <1>; 241 vsync-len = <2>; 242 }; 243 }; |
244 |
245 port { 246 dsi_in: endpoint { 247 remote-endpoint = <&dsi_out>; 248 }; 249 }; 250 }; 251}; |
252 |
253&exynos_usbphy { 254 status = "okay"; 255 vbus-supply = <&safe1_sreg>; 256}; |
257 |
258&fimd { 259 status = "okay"; 260}; |
261 |
262&hsotg { 263 vusb_d-supply = <&vusb_reg>; 264 vusb_a-supply = <&vusbdac_reg>; 265 dr_mode = "peripheral"; 266 status = "okay"; 267}; |
268 |
269&i2c_3 { 270 samsung,i2c-sda-delay = <100>; 271 samsung,i2c-slave-addr = <0x10>; 272 samsung,i2c-max-bus-freq = <400000>; 273 pinctrl-0 = <&i2c3_bus>; 274 pinctrl-names = "default"; 275 status = "okay"; |
276 |
277 mms114-touchscreen@48 { 278 compatible = "melfas,mms114"; 279 reg = <0x48>; 280 interrupt-parent = <&gpx0>; 281 interrupts = <4 2>; 282 x-size = <720>; 283 y-size = <1280>; 284 avdd-supply = <&tsp_reg>; 285 vdd-supply = <&tsp_reg>; 286 }; 287}; |
288 |
289&i2c_5 { 290 samsung,i2c-sda-delay = <100>; 291 samsung,i2c-slave-addr = <0x10>; 292 samsung,i2c-max-bus-freq = <100000>; 293 pinctrl-0 = <&i2c5_bus>; 294 pinctrl-names = "default"; 295 status = "okay"; |
296 |
297 max8997_pmic@66 { 298 compatible = "maxim,max8997-pmic"; |
299 |
300 reg = <0x66>; |
301 |
302 max8997,pmic-buck1-uses-gpio-dvs; 303 max8997,pmic-buck2-uses-gpio-dvs; 304 max8997,pmic-buck5-uses-gpio-dvs; |
305 |
306 max8997,pmic-ignore-gpiodvs-side-effect; 307 max8997,pmic-buck125-default-dvs-idx = <0>; |
308 |
309 max8997,pmic-buck125-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>, 310 <&gpx0 6 GPIO_ACTIVE_HIGH>, 311 <&gpl0 0 GPIO_ACTIVE_HIGH>; |
312 |
313 max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>, 314 <1250000>, <1200000>, 315 <1150000>, <1100000>, 316 <1000000>, <950000>; |
317 |
318 max8997,pmic-buck2-dvs-voltage = <1100000>, <1000000>, 319 <950000>, <900000>, 320 <1100000>, <1000000>, 321 <950000>, <900000>; |
322 |
323 max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>, 324 <1200000>, <1200000>, 325 <1200000>, <1200000>, 326 <1200000>, <1200000>; |
327 |
328 regulators { 329 valive_reg: LDO2 { 330 regulator-name = "VALIVE_1.1V_C210"; 331 regulator-min-microvolt = <1100000>; 332 regulator-max-microvolt = <1100000>; 333 regulator-always-on; 334 }; |
335 |
336 vusb_reg: LDO3 { 337 regulator-name = "VUSB_1.1V_C210"; 338 regulator-min-microvolt = <1100000>; 339 regulator-max-microvolt = <1100000>; |
340 }; |
341 |
342 vmipi_reg: LDO4 { 343 regulator-name = "VMIPI_1.8V"; 344 regulator-min-microvolt = <1800000>; 345 regulator-max-microvolt = <1800000>; 346 }; |
347 |
348 vpda_reg: LDO6 { 349 regulator-name = "VCC_1.8V_PDA"; 350 regulator-min-microvolt = <1800000>; 351 regulator-max-microvolt = <1800000>; 352 regulator-always-on; 353 }; |
354 |
355 vcam_reg: LDO7 { 356 regulator-name = "CAM_ISP_1.8V"; 357 regulator-min-microvolt = <1800000>; 358 regulator-max-microvolt = <1800000>; 359 }; |
360 |
361 vusbdac_reg: LDO8 { 362 regulator-name = "VUSB/VDAC_3.3V_C210"; 363 regulator-min-microvolt = <3300000>; 364 regulator-max-microvolt = <3300000>; 365 }; |
366 |
367 vccpda_reg: LDO9 { 368 regulator-name = "VCC_2.8V_PDA"; 369 regulator-min-microvolt = <2800000>; 370 regulator-max-microvolt = <2800000>; 371 regulator-always-on; 372 }; |
373 |
374 vpll_reg: LDO10 { 375 regulator-name = "VPLL_1.1V_C210"; 376 regulator-min-microvolt = <1100000>; 377 regulator-max-microvolt = <1100000>; 378 regulator-always-on; |
379 }; |
380 |
381 vtcam_reg: LDO12 { 382 regulator-name = "VT_CAM_1.8V"; 383 regulator-min-microvolt = <1800000>; 384 regulator-max-microvolt = <1800000>; 385 }; |
386 |
387 vcclcd_reg: LDO13 { 388 regulator-name = "VCC_3.3V_LCD"; 389 regulator-min-microvolt = <3300000>; 390 regulator-max-microvolt = <3300000>; |
391 }; 392 |
393 vlcd_reg: LDO15 { 394 regulator-name = "VLCD_2.2V"; 395 regulator-min-microvolt = <2200000>; 396 regulator-max-microvolt = <2200000>; |
397 }; |
398 |
399 camsensor_reg: LDO16 { 400 regulator-name = "CAM_SENSOR_IO_1.8V"; 401 regulator-min-microvolt = <1800000>; 402 regulator-max-microvolt = <1800000>; 403 }; |
404 |
405 vddq_reg: LDO21 { 406 regulator-name = "VDDQ_M1M2_1.2V"; 407 regulator-min-microvolt = <1200000>; 408 regulator-max-microvolt = <1200000>; 409 regulator-always-on; 410 }; |
411 |
412 varm_breg: BUCK1 { 413 /* 414 * HACK: The real name is VARM_1.2V_C210, 415 * but exynos-cpufreq does not support 416 * DT-based regulator lookup yet. 417 */ 418 regulator-name = "vdd_arm"; 419 regulator-min-microvolt = <900000>; 420 regulator-max-microvolt = <1350000>; 421 regulator-always-on; 422 }; |
423 |
424 vint_breg: BUCK2 { 425 regulator-name = "VINT_1.1V_C210"; 426 regulator-min-microvolt = <900000>; 427 regulator-max-microvolt = <1100000>; 428 regulator-always-on; 429 }; |
430 |
431 camisp_breg: BUCK4 { 432 regulator-name = "CAM_ISP_CORE_1.2V"; 433 regulator-min-microvolt = <1200000>; 434 regulator-max-microvolt = <1200000>; 435 }; |
436 |
437 vmem_breg: BUCK5 { 438 regulator-name = "VMEM_1.2V_C210"; 439 regulator-min-microvolt = <1200000>; 440 regulator-max-microvolt = <1200000>; 441 regulator-always-on; 442 }; 443 444 vccsub_breg: BUCK7 { 445 regulator-name = "VCC_SUB_2.0V"; 446 regulator-min-microvolt = <2000000>; 447 regulator-max-microvolt = <2000000>; 448 regulator-always-on; 449 }; 450 451 safe1_sreg: ESAFEOUT1 { 452 regulator-name = "SAFEOUT1"; 453 }; 454 455 safe2_sreg: ESAFEOUT2 { 456 regulator-name = "SAFEOUT2"; 457 regulator-boot-on; 458 }; |
459 }; 460 }; 461}; |
462 463&sdhci_0 { 464 bus-width = <8>; 465 non-removable; 466 pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>; 467 pinctrl-names = "default"; 468 vmmc-supply = <&vemmc_reg>; 469 status = "okay"; 470}; 471 472&serial_0 { 473 status = "okay"; 474}; 475 476&serial_1 { 477 status = "okay"; 478}; 479 480&serial_2 { 481 status = "okay"; 482}; 483 484&serial_3 { 485 status = "okay"; 486}; 487 488&tmu { 489 status = "okay"; 490}; |