18a19
> #include <dt-bindings/gpio/gpio.h>
48c49
< gpio = <&gpx1 1 0>;
---
> gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
53,255d53
< watchdog@10060000 {
< status = "okay";
< };
<
< rtc@10070000 {
< status = "okay";
< };
<
< tmu@100C0000 {
< status = "okay";
< };
<
< sdhci@12530000 {
< bus-width = <4>;
< pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>;
< pinctrl-names = "default";
< vmmc-supply = <&mmc_reg>;
< status = "okay";
< };
<
< sdhci@12510000 {
< bus-width = <4>;
< pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_cd>;
< pinctrl-names = "default";
< vmmc-supply = <&mmc_reg>;
< status = "okay";
< };
<
< g2d@12800000 {
< status = "okay";
< };
<
< codec@13400000 {
< samsung,mfc-r = <0x43000000 0x800000>;
< samsung,mfc-l = <0x51000000 0x800000>;
< status = "okay";
< };
<
< serial@13800000 {
< status = "okay";
< };
<
< serial@13810000 {
< status = "okay";
< };
<
< serial@13820000 {
< status = "okay";
< };
<
< serial@13830000 {
< status = "okay";
< };
<
< i2c@13860000 {
< status = "okay";
< samsung,i2c-sda-delay = <100>;
< samsung,i2c-max-bus-freq = <20000>;
< pinctrl-0 = <&i2c0_bus>;
< pinctrl-names = "default";
<
< max8997_pmic@66 {
< compatible = "maxim,max8997-pmic";
< reg = <0x66>;
< interrupt-parent = <&gpx0>;
< interrupts = <4 0>, <3 0>;
<
< max8997,pmic-buck1-dvs-voltage = <1350000>;
< max8997,pmic-buck2-dvs-voltage = <1100000>;
< max8997,pmic-buck5-dvs-voltage = <1200000>;
<
< regulators {
< ldo1_reg: LDO1 {
< regulator-name = "VDD_ABB_3.3V";
< regulator-min-microvolt = <3300000>;
< regulator-max-microvolt = <3300000>;
< };
<
< ldo2_reg: LDO2 {
< regulator-name = "VDD_ALIVE_1.1V";
< regulator-min-microvolt = <1100000>;
< regulator-max-microvolt = <1100000>;
< regulator-always-on;
< };
<
< ldo3_reg: LDO3 {
< regulator-name = "VMIPI_1.1V";
< regulator-min-microvolt = <1100000>;
< regulator-max-microvolt = <1100000>;
< };
<
< ldo4_reg: LDO4 {
< regulator-name = "VDD_RTC_1.8V";
< regulator-min-microvolt = <1800000>;
< regulator-max-microvolt = <1800000>;
< regulator-always-on;
< };
<
< ldo6_reg: LDO6 {
< regulator-name = "VMIPI_1.8V";
< regulator-min-microvolt = <1800000>;
< regulator-max-microvolt = <1800000>;
< regulator-always-on;
< };
<
< ldo7_reg: LDO7 {
< regulator-name = "VDD_AUD_1.8V";
< regulator-min-microvolt = <1800000>;
< regulator-max-microvolt = <1800000>;
< };
<
< ldo8_reg: LDO8 {
< regulator-name = "VADC_3.3V";
< regulator-min-microvolt = <3300000>;
< regulator-max-microvolt = <3300000>;
< };
<
< ldo9_reg: LDO9 {
< regulator-name = "DVDD_SWB_2.8V";
< regulator-min-microvolt = <2800000>;
< regulator-max-microvolt = <2800000>;
< regulator-always-on;
< };
<
< ldo10_reg: LDO10 {
< regulator-name = "VDD_PLL_1.1V";
< regulator-min-microvolt = <1100000>;
< regulator-max-microvolt = <1100000>;
< regulator-always-on;
< };
<
< ldo11_reg: LDO11 {
< regulator-name = "VDD_AUD_3V";
< regulator-min-microvolt = <3000000>;
< regulator-max-microvolt = <3000000>;
< };
<
< ldo14_reg: LDO14 {
< regulator-name = "AVDD18_SWB_1.8V";
< regulator-min-microvolt = <1800000>;
< regulator-max-microvolt = <1800000>;
< regulator-always-on;
< };
<
< ldo17_reg: LDO17 {
< regulator-name = "VDD_SWB_3.3V";
< regulator-min-microvolt = <3300000>;
< regulator-max-microvolt = <3300000>;
< regulator-always-on;
< };
<
< ldo21_reg: LDO21 {
< regulator-name = "VDD_MIF_1.2V";
< regulator-min-microvolt = <1200000>;
< regulator-max-microvolt = <1200000>;
< regulator-always-on;
< };
<
< buck1_reg: BUCK1 {
< /*
< * HACK: The real name is VDD_ARM_1.2V,
< * but exynos-cpufreq does not support
< * DT-based regulator lookup yet.
< */
< regulator-name = "vdd_arm";
< regulator-min-microvolt = <950000>;
< regulator-max-microvolt = <1350000>;
< regulator-always-on;
< regulator-boot-on;
< };
<
< buck2_reg: BUCK2 {
< regulator-name = "VDD_INT_1.1V";
< regulator-min-microvolt = <900000>;
< regulator-max-microvolt = <1100000>;
< regulator-always-on;
< regulator-boot-on;
< };
<
< buck3_reg: BUCK3 {
< regulator-name = "VDD_G3D_1.1V";
< regulator-min-microvolt = <900000>;
< regulator-max-microvolt = <1100000>;
< };
<
< buck5_reg: BUCK5 {
< regulator-name = "VDDQ_M1M2_1.2V";
< regulator-min-microvolt = <1200000>;
< regulator-max-microvolt = <1200000>;
< regulator-always-on;
< };
<
< buck7_reg: BUCK7 {
< regulator-name = "VDD_LCD_3.3V";
< regulator-min-microvolt = <3300000>;
< regulator-max-microvolt = <3300000>;
< regulator-boot-on;
< regulator-always-on;
< };
< };
< };
< };
<
263c61
< gpios = <&gpx2 0 1>;
---
> gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
270c68
< gpios = <&gpx2 1 1>;
---
> gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
277c75
< gpios = <&gpx1 7 1>;
---
> gpios = <&gpx1 7 GPIO_ACTIVE_LOW>;
284c82
< gpios = <&gpx1 6 1>;
---
> gpios = <&gpx1 6 GPIO_ACTIVE_LOW>;
291c89
< gpios = <&gpx1 5 1>;
---
> gpios = <&gpx1 5 GPIO_ACTIVE_LOW>;
300c98
< gpios = <&gpx1 3 1>;
---
> gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
317,322d114
< fimd@11c00000 {
< pinctrl-0 = <&lcd_en &lcd_clk &lcd_data24 &pwm0_out>;
< pinctrl-names = "default";
< status = "okay";
< };
<
337a130,338
>
> &cpu0 {
> cpu0-supply = <&buck1_reg>;
> };
>
> &fimd {
> pinctrl-0 = <&lcd_en &lcd_clk &lcd_data24 &pwm0_out>;
> pinctrl-names = "default";
> status = "okay";
> };
>
> &i2c_0 {
> status = "okay";
> samsung,i2c-sda-delay = <100>;
> samsung,i2c-max-bus-freq = <20000>;
> pinctrl-0 = <&i2c0_bus>;
> pinctrl-names = "default";
>
> max8997_pmic@66 {
> compatible = "maxim,max8997-pmic";
> reg = <0x66>;
> interrupt-parent = <&gpx0>;
> interrupts = <4 0>, <3 0>;
>
> max8997,pmic-buck1-dvs-voltage = <1350000>;
> max8997,pmic-buck2-dvs-voltage = <1100000>;
> max8997,pmic-buck5-dvs-voltage = <1200000>;
>
> regulators {
> ldo1_reg: LDO1 {
> regulator-name = "VDD_ABB_3.3V";
> regulator-min-microvolt = <3300000>;
> regulator-max-microvolt = <3300000>;
> };
>
> ldo2_reg: LDO2 {
> regulator-name = "VDD_ALIVE_1.1V";
> regulator-min-microvolt = <1100000>;
> regulator-max-microvolt = <1100000>;
> regulator-always-on;
> };
>
> ldo3_reg: LDO3 {
> regulator-name = "VMIPI_1.1V";
> regulator-min-microvolt = <1100000>;
> regulator-max-microvolt = <1100000>;
> };
>
> ldo4_reg: LDO4 {
> regulator-name = "VDD_RTC_1.8V";
> regulator-min-microvolt = <1800000>;
> regulator-max-microvolt = <1800000>;
> regulator-always-on;
> };
>
> ldo6_reg: LDO6 {
> regulator-name = "VMIPI_1.8V";
> regulator-min-microvolt = <1800000>;
> regulator-max-microvolt = <1800000>;
> regulator-always-on;
> };
>
> ldo7_reg: LDO7 {
> regulator-name = "VDD_AUD_1.8V";
> regulator-min-microvolt = <1800000>;
> regulator-max-microvolt = <1800000>;
> };
>
> ldo8_reg: LDO8 {
> regulator-name = "VADC_3.3V";
> regulator-min-microvolt = <3300000>;
> regulator-max-microvolt = <3300000>;
> };
>
> ldo9_reg: LDO9 {
> regulator-name = "DVDD_SWB_2.8V";
> regulator-min-microvolt = <2800000>;
> regulator-max-microvolt = <2800000>;
> regulator-always-on;
> };
>
> ldo10_reg: LDO10 {
> regulator-name = "VDD_PLL_1.1V";
> regulator-min-microvolt = <1100000>;
> regulator-max-microvolt = <1100000>;
> regulator-always-on;
> };
>
> ldo11_reg: LDO11 {
> regulator-name = "VDD_AUD_3V";
> regulator-min-microvolt = <3000000>;
> regulator-max-microvolt = <3000000>;
> };
>
> ldo14_reg: LDO14 {
> regulator-name = "AVDD18_SWB_1.8V";
> regulator-min-microvolt = <1800000>;
> regulator-max-microvolt = <1800000>;
> regulator-always-on;
> };
>
> ldo17_reg: LDO17 {
> regulator-name = "VDD_SWB_3.3V";
> regulator-min-microvolt = <3300000>;
> regulator-max-microvolt = <3300000>;
> regulator-always-on;
> };
>
> ldo21_reg: LDO21 {
> regulator-name = "VDD_MIF_1.2V";
> regulator-min-microvolt = <1200000>;
> regulator-max-microvolt = <1200000>;
> regulator-always-on;
> };
>
> buck1_reg: BUCK1 {
> /*
> * HACK: The real name is VDD_ARM_1.2V,
> * but exynos-cpufreq does not support
> * DT-based regulator lookup yet.
> */
> regulator-name = "vdd_arm";
> regulator-min-microvolt = <950000>;
> regulator-max-microvolt = <1350000>;
> regulator-always-on;
> regulator-boot-on;
> };
>
> buck2_reg: BUCK2 {
> regulator-name = "VDD_INT_1.1V";
> regulator-min-microvolt = <900000>;
> regulator-max-microvolt = <1100000>;
> regulator-always-on;
> regulator-boot-on;
> };
>
> buck3_reg: BUCK3 {
> regulator-name = "VDD_G3D_1.1V";
> regulator-min-microvolt = <900000>;
> regulator-max-microvolt = <1100000>;
> };
>
> buck5_reg: BUCK5 {
> regulator-name = "VDDQ_M1M2_1.2V";
> regulator-min-microvolt = <1200000>;
> regulator-max-microvolt = <1200000>;
> regulator-always-on;
> };
>
> buck7_reg: BUCK7 {
> regulator-name = "VDD_LCD_3.3V";
> regulator-min-microvolt = <3300000>;
> regulator-max-microvolt = <3300000>;
> regulator-boot-on;
> regulator-always-on;
> };
> };
> };
> };
>
> &mfc {
> samsung,mfc-r = <0x43000000 0x800000>;
> samsung,mfc-l = <0x51000000 0x800000>;
> status = "okay";
> };
>
> &sdhci_0 {
> bus-width = <4>;
> pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_cd>;
> pinctrl-names = "default";
> vmmc-supply = <&mmc_reg>;
> status = "okay";
> };
>
> &sdhci_2 {
> bus-width = <4>;
> pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>;
> pinctrl-names = "default";
> vmmc-supply = <&mmc_reg>;
> status = "okay";
> };
>
> &serial_0 {
> status = "okay";
> };
>
> &serial_1 {
> status = "okay";
> };
>
> &serial_2 {
> status = "okay";
> };
>
> &serial_3 {
> status = "okay";
> };
>
> &rtc {
> status = "okay";
> };
>
> &tmu {
> status = "okay";
> };
>
> &watchdog {
> status = "okay";
> };