1/* 2 * Device Tree file for Lenovo Iomega ix4-300d 3 * 4 * Copyright (C) 2014, Benoit Masson <yahoo@perenite.com> 5 * 6 * This file is dual-licensed: you can use it either under the terms 7 * of the GPL or the X11 license, at your option. Note that this dual 8 * licensing only applies to this file, and not this project as a --- 40 unchanged lines hidden (view full) --- 49#include "armada-xp-mv78230.dtsi" 50 51/ { 52 model = "Lenovo Iomega ix4-300d"; 53 compatible = "lenovo,ix4-300d", "marvell,armadaxp-mv78230", 54 "marvell,armadaxp", "marvell,armada-370-xp"; 55 56 chosen { |
57 stdout-path = "serial0:115200n8"; |
58 }; 59 60 memory { 61 device_type = "memory"; 62 reg = <0 0x00000000 0 0x20000000>; /* 512MB */ 63 }; 64 65 soc { 66 ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000 |
67 MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 68 MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000 69 MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>; |
70 71 pcie-controller { 72 status = "okay"; 73 74 /* Quad port sata: Marvell 88SX7042 */ 75 pcie@1,0 { 76 /* Port 0, Lane 0 */ 77 status = "okay"; --- 68 unchanged lines hidden (view full) --- 146 147 nand@d0000 { 148 status = "okay"; 149 num-cs = <1>; 150 marvell,nand-keep-config; 151 marvell,nand-enable-arbiter; 152 nand-on-flash-bbt; 153 |
154 partitions { 155 #address-cells = <1>; 156 #size-cells = <1>; |
157 |
158 partition@0 { 159 label = "u-boot"; 160 reg = <0x00000000 0x000e0000>; 161 read-only; 162 }; |
163 |
164 partition@e0000 { 165 label = "u-boot-env"; 166 reg = <0x000e0000 0x00020000>; 167 read-only; 168 }; |
169 |
170 partition@100000 { 171 label = "u-boot-env2"; 172 reg = <0x00100000 0x00020000>; 173 read-only; 174 }; |
175 |
176 partition@120000 { 177 label = "zImage"; 178 reg = <0x00120000 0x00400000>; 179 }; |
180 |
181 partition@520000 { 182 label = "initrd"; 183 reg = <0x00520000 0x00400000>; 184 }; |
185 |
186 partition@e00000 { 187 label = "boot"; 188 reg = <0x00e00000 0x3f200000>; 189 }; |
190 }; 191 }; 192 }; 193 }; 194 195 gpio-keys { 196 compatible = "gpio-keys"; 197 pinctrl-0 = <&power_button_pin &reset_button_pin --- 130 unchanged lines hidden --- |