47a48,56
> *
> * Note: this Device Tree assumes that the bootloader has remapped the
> * internal registers to 0xf1000000 (instead of the default
> * 0xd0000000). The 0xf1000000 is the default used by the recent,
> * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
> * boards were delivered with an older version of the bootloader that
> * left internal registers mapped at 0xd0000000. If you are in this
> * situation, you should either update your bootloader (preferred
> * solution) or the below Device Tree should be adjusted.
58c67
< bootargs = "console=ttyS0,115200 earlyprintk";
---
> stdout-path = "serial0:115200n8";
67,68c76,78
< ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
< MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
---
> ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
> MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
> MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
156c166
< compatible = "mx25l25635e";
---
> compatible = "mx25l25635e", "jedec,spi-nor";
> *
> * Note: this Device Tree assumes that the bootloader has remapped the
> * internal registers to 0xf1000000 (instead of the default
> * 0xd0000000). The 0xf1000000 is the default used by the recent,
> * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
> * boards were delivered with an older version of the bootloader that
> * left internal registers mapped at 0xd0000000. If you are in this
> * situation, you should either update your bootloader (preferred
> * solution) or the below Device Tree should be adjusted.
58c67
< bootargs = "console=ttyS0,115200 earlyprintk";
---
> stdout-path = "serial0:115200n8";
67,68c76,78
< ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
< MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
---
> ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
> MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
> MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
156c166
< compatible = "mx25l25635e";
---
> compatible = "mx25l25635e", "jedec,spi-nor";