1/*-
2 * Copyright (c) 1997, 1998, 1999, 2000
3 * Bill Paul <wpaul@ee.columbia.edu>. All rights reserved.
4 *
5 * Copyright (c) 2006
6 * Alfred Perlstein <alfred@FreeBSD.org>. All rights reserved.
7 *
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions
10 * are met:
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in the
15 * documentation and/or other materials provided with the distribution.
16 * 3. All advertising materials mentioning features or use of this software
17 * must display the following acknowledgement:
18 * This product includes software developed by Bill Paul.
19 * 4. Neither the name of the author nor the names of any co-contributors
20 * may be used to endorse or promote products derived from this software
21 * without specific prior written permission.
22 *
23 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
24 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
25 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
26 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
27 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
28 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
29 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
30 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
31 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
32 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
33 * THE POSSIBILITY OF SUCH DAMAGE.
34 */
35
36#include <sys/cdefs.h>
37__FBSDID("$FreeBSD: head/sys/dev/usb/net/if_aue.c 207077 2010-04-22 21:31:34Z thompsa $");
38
39/*
40 * ADMtek AN986 Pegasus and AN8511 Pegasus II USB to ethernet driver.
41 * Datasheet is available from http://www.admtek.com.tw.
42 *
43 * Written by Bill Paul <wpaul@ee.columbia.edu>
44 * Electrical Engineering Department
45 * Columbia University, New York City
46 *
47 * SMP locking by Alfred Perlstein <alfred@FreeBSD.org>.
48 * RED Inc.
49 */
50
51/*
52 * The Pegasus chip uses four USB "endpoints" to provide 10/100 ethernet
53 * support: the control endpoint for reading/writing registers, burst
54 * read endpoint for packet reception, burst write for packet transmission
55 * and one for "interrupts." The chip uses the same RX filter scheme
56 * as the other ADMtek ethernet parts: one perfect filter entry for the
57 * the station address and a 64-bit multicast hash table. The chip supports
58 * both MII and HomePNA attachments.
59 *
60 * Since the maximum data transfer speed of USB is supposed to be 12Mbps,
61 * you're never really going to get 100Mbps speeds from this device. I
62 * think the idea is to allow the device to connect to 10 or 100Mbps
63 * networks, not necessarily to provide 100Mbps performance. Also, since
64 * the controller uses an external PHY chip, it's possible that board
65 * designers might simply choose a 10Mbps PHY.
66 *
67 * Registers are accessed using uether_do_request(). Packet
68 * transfers are done using usbd_transfer() and friends.
69 */
70
71#include <sys/stdint.h>
72#include <sys/stddef.h>
73#include <sys/param.h>
74#include <sys/queue.h>
75#include <sys/types.h>
76#include <sys/systm.h>
77#include <sys/kernel.h>
78#include <sys/bus.h>
79#include <sys/linker_set.h>
80#include <sys/module.h>
81#include <sys/lock.h>
82#include <sys/mutex.h>
83#include <sys/condvar.h>
84#include <sys/sysctl.h>
85#include <sys/sx.h>
86#include <sys/unistd.h>
87#include <sys/callout.h>
88#include <sys/malloc.h>
89#include <sys/priv.h>
90
91#include <dev/usb/usb.h>
92#include <dev/usb/usbdi.h>
93#include <dev/usb/usbdi_util.h>
94#include "usbdevs.h"
95
96#define USB_DEBUG_VAR aue_debug
97#include <dev/usb/usb_debug.h>
98#include <dev/usb/usb_process.h>
99
100#include <dev/usb/net/usb_ethernet.h>
101#include <dev/usb/net/if_auereg.h>
102
103#ifdef USB_DEBUG
104static int aue_debug = 0;
105
106SYSCTL_NODE(_hw_usb, OID_AUTO, aue, CTLFLAG_RW, 0, "USB aue");
107SYSCTL_INT(_hw_usb_aue, OID_AUTO, debug, CTLFLAG_RW, &aue_debug, 0,
108 "Debug level");
109#endif
110
111/*
112 * Various supported device vendors/products.
113 */
114static const struct usb_device_id aue_devs[] = {
115#define AUE_DEV(v,p,i) { USB_VPI(USB_VENDOR_##v, USB_PRODUCT_##v##_##p, i) }
116 AUE_DEV(3COM, 3C460B, AUE_FLAG_PII),
117 AUE_DEV(ABOCOM, DSB650TX_PNA, 0),
118 AUE_DEV(ABOCOM, UFE1000, AUE_FLAG_LSYS),
119 AUE_DEV(ABOCOM, XX10, 0),
120 AUE_DEV(ABOCOM, XX1, AUE_FLAG_PNA | AUE_FLAG_PII),
121 AUE_DEV(ABOCOM, XX2, AUE_FLAG_PII),
122 AUE_DEV(ABOCOM, XX4, AUE_FLAG_PNA),
123 AUE_DEV(ABOCOM, XX5, AUE_FLAG_PNA),
124 AUE_DEV(ABOCOM, XX6, AUE_FLAG_PII),
125 AUE_DEV(ABOCOM, XX7, AUE_FLAG_PII),
126 AUE_DEV(ABOCOM, XX8, AUE_FLAG_PII),
127 AUE_DEV(ABOCOM, XX9, AUE_FLAG_PNA),
128 AUE_DEV(ACCTON, SS1001, AUE_FLAG_PII),
129 AUE_DEV(ACCTON, USB320_EC, 0),
130 AUE_DEV(ADMTEK, PEGASUSII_2, AUE_FLAG_PII),
131 AUE_DEV(ADMTEK, PEGASUSII_3, AUE_FLAG_PII),
132 AUE_DEV(ADMTEK, PEGASUSII_4, AUE_FLAG_PII),
133 AUE_DEV(ADMTEK, PEGASUSII, AUE_FLAG_PII),
134 AUE_DEV(ADMTEK, PEGASUS, AUE_FLAG_PNA | AUE_FLAG_DUAL_PHY),
135 AUE_DEV(AEI, FASTETHERNET, AUE_FLAG_PII),
136 AUE_DEV(ALLIEDTELESYN, ATUSB100, AUE_FLAG_PII),
137 AUE_DEV(ATEN, UC110T, AUE_FLAG_PII),
138 AUE_DEV(BELKIN, USB2LAN, AUE_FLAG_PII),
139 AUE_DEV(BILLIONTON, USB100, 0),
140 AUE_DEV(BILLIONTON, USBE100, AUE_FLAG_PII),
141 AUE_DEV(BILLIONTON, USBEL100, 0),
142 AUE_DEV(BILLIONTON, USBLP100, AUE_FLAG_PNA),
143 AUE_DEV(COREGA, FETHER_USB_TXS, AUE_FLAG_PII),
144 AUE_DEV(COREGA, FETHER_USB_TX, 0),
145 AUE_DEV(DLINK, DSB650TX1, AUE_FLAG_LSYS),
146 AUE_DEV(DLINK, DSB650TX2, AUE_FLAG_LSYS | AUE_FLAG_PII),
147 AUE_DEV(DLINK, DSB650TX3, AUE_FLAG_LSYS | AUE_FLAG_PII),
148 AUE_DEV(DLINK, DSB650TX4, AUE_FLAG_LSYS | AUE_FLAG_PII),
149 AUE_DEV(DLINK, DSB650TX_PNA, AUE_FLAG_PNA),
150 AUE_DEV(DLINK, DSB650TX, AUE_FLAG_LSYS),
151 AUE_DEV(DLINK, DSB650, AUE_FLAG_LSYS),
152 AUE_DEV(ELCON, PLAN, AUE_FLAG_PNA | AUE_FLAG_PII),
153 AUE_DEV(ELECOM, LDUSB20, AUE_FLAG_PII),
154 AUE_DEV(ELECOM, LDUSBLTX, AUE_FLAG_PII),
155 AUE_DEV(ELECOM, LDUSBTX0, 0),
156 AUE_DEV(ELECOM, LDUSBTX1, AUE_FLAG_LSYS),
157 AUE_DEV(ELECOM, LDUSBTX2, 0),
158 AUE_DEV(ELECOM, LDUSBTX3, AUE_FLAG_LSYS),
159 AUE_DEV(ELSA, USB2ETHERNET, 0),
160 AUE_DEV(GIGABYTE, GNBR402W, 0),
161 AUE_DEV(HAWKING, UF100, AUE_FLAG_PII),
162 AUE_DEV(HP, HN210E, AUE_FLAG_PII),
163 AUE_DEV(IODATA, USBETTXS, AUE_FLAG_PII),
164 AUE_DEV(IODATA, USBETTX, 0),
165 AUE_DEV(KINGSTON, KNU101TX, 0),
166 AUE_DEV(LINKSYS, USB100H1, AUE_FLAG_LSYS | AUE_FLAG_PNA),
167 AUE_DEV(LINKSYS, USB100TX, AUE_FLAG_LSYS),
168 AUE_DEV(LINKSYS, USB10TA, AUE_FLAG_LSYS),
169 AUE_DEV(LINKSYS, USB10TX1, AUE_FLAG_LSYS | AUE_FLAG_PII),
170 AUE_DEV(LINKSYS, USB10TX2, AUE_FLAG_LSYS | AUE_FLAG_PII),
171 AUE_DEV(LINKSYS, USB10T, AUE_FLAG_LSYS),
172 AUE_DEV(MELCO, LUA2TX5, AUE_FLAG_PII),
173 AUE_DEV(MELCO, LUATX1, 0),
174 AUE_DEV(MELCO, LUATX5, 0),
175 AUE_DEV(MICROSOFT, MN110, AUE_FLAG_PII),
176 AUE_DEV(NETGEAR, FA101, AUE_FLAG_PII),
177 AUE_DEV(SIEMENS, SPEEDSTREAM, AUE_FLAG_PII),
178 AUE_DEV(SIIG2, USBTOETHER, AUE_FLAG_PII),
179 AUE_DEV(SMARTBRIDGES, SMARTNIC, AUE_FLAG_PII),
180 AUE_DEV(SMC, 2202USB, 0),
181 AUE_DEV(SMC, 2206USB, AUE_FLAG_PII),
182 AUE_DEV(SOHOWARE, NUB100, 0),
183 AUE_DEV(SOHOWARE, NUB110, AUE_FLAG_PII),
184#undef AUE_DEV
185};
186
187/* prototypes */
188
189static device_probe_t aue_probe;
190static device_attach_t aue_attach;
191static device_detach_t aue_detach;
192static miibus_readreg_t aue_miibus_readreg;
193static miibus_writereg_t aue_miibus_writereg;
194static miibus_statchg_t aue_miibus_statchg;
195
196static usb_callback_t aue_intr_callback;
197static usb_callback_t aue_bulk_read_callback;
198static usb_callback_t aue_bulk_write_callback;
199
200static uether_fn_t aue_attach_post;
201static uether_fn_t aue_init;
202static uether_fn_t aue_stop;
203static uether_fn_t aue_start;
204static uether_fn_t aue_tick;
205static uether_fn_t aue_setmulti;
206static uether_fn_t aue_setpromisc;
207
208static uint8_t aue_csr_read_1(struct aue_softc *, uint16_t);
209static uint16_t aue_csr_read_2(struct aue_softc *, uint16_t);
210static void aue_csr_write_1(struct aue_softc *, uint16_t, uint8_t);
211static void aue_csr_write_2(struct aue_softc *, uint16_t, uint16_t);
212static void aue_eeprom_getword(struct aue_softc *, int, uint16_t *);
213static void aue_read_eeprom(struct aue_softc *, uint8_t *, uint16_t,
214 uint16_t);
215static void aue_reset(struct aue_softc *);
216static void aue_reset_pegasus_II(struct aue_softc *);
217
218static int aue_ifmedia_upd(struct ifnet *);
219static void aue_ifmedia_sts(struct ifnet *, struct ifmediareq *);
220
221static const struct usb_config aue_config[AUE_N_TRANSFER] = {
222
223 [AUE_BULK_DT_WR] = {
224 .type = UE_BULK,
225 .endpoint = UE_ADDR_ANY,
226 .direction = UE_DIR_OUT,
227 .bufsize = (MCLBYTES + 2),
228 .flags = {.pipe_bof = 1,.force_short_xfer = 1,},
229 .callback = aue_bulk_write_callback,
230 .timeout = 10000, /* 10 seconds */
231 },
232
233 [AUE_BULK_DT_RD] = {
234 .type = UE_BULK,
235 .endpoint = UE_ADDR_ANY,
236 .direction = UE_DIR_IN,
237 .bufsize = (MCLBYTES + 4 + ETHER_CRC_LEN),
238 .flags = {.pipe_bof = 1,.short_xfer_ok = 1,},
239 .callback = aue_bulk_read_callback,
240 },
241
242 [AUE_INTR_DT_RD] = {
243 .type = UE_INTERRUPT,
244 .endpoint = UE_ADDR_ANY,
245 .direction = UE_DIR_IN,
246 .flags = {.pipe_bof = 1,.short_xfer_ok = 1,},
247 .bufsize = 0, /* use wMaxPacketSize */
248 .callback = aue_intr_callback,
249 },
250};
251
252static device_method_t aue_methods[] = {
253 /* Device interface */
254 DEVMETHOD(device_probe, aue_probe),
255 DEVMETHOD(device_attach, aue_attach),
256 DEVMETHOD(device_detach, aue_detach),
257
258 /* bus interface */
259 DEVMETHOD(bus_print_child, bus_generic_print_child),
260 DEVMETHOD(bus_driver_added, bus_generic_driver_added),
261
262 /* MII interface */
263 DEVMETHOD(miibus_readreg, aue_miibus_readreg),
264 DEVMETHOD(miibus_writereg, aue_miibus_writereg),
265 DEVMETHOD(miibus_statchg, aue_miibus_statchg),
266
267 {0, 0}
268};
269
270static driver_t aue_driver = {
271 .name = "aue",
272 .methods = aue_methods,
273 .size = sizeof(struct aue_softc)
274};
275
276static devclass_t aue_devclass;
277
278DRIVER_MODULE(aue, uhub, aue_driver, aue_devclass, NULL, 0);
279DRIVER_MODULE(miibus, aue, miibus_driver, miibus_devclass, 0, 0);
280MODULE_DEPEND(aue, uether, 1, 1, 1);
281MODULE_DEPEND(aue, usb, 1, 1, 1);
282MODULE_DEPEND(aue, ether, 1, 1, 1);
283MODULE_DEPEND(aue, miibus, 1, 1, 1);
284
285static const struct usb_ether_methods aue_ue_methods = {
286 .ue_attach_post = aue_attach_post,
287 .ue_start = aue_start,
288 .ue_init = aue_init,
289 .ue_stop = aue_stop,
290 .ue_tick = aue_tick,
291 .ue_setmulti = aue_setmulti,
292 .ue_setpromisc = aue_setpromisc,
293 .ue_mii_upd = aue_ifmedia_upd,
294 .ue_mii_sts = aue_ifmedia_sts,
295};
296
297#define AUE_SETBIT(sc, reg, x) \
298 aue_csr_write_1(sc, reg, aue_csr_read_1(sc, reg) | (x))
299
300#define AUE_CLRBIT(sc, reg, x) \
301 aue_csr_write_1(sc, reg, aue_csr_read_1(sc, reg) & ~(x))
302
303static uint8_t
304aue_csr_read_1(struct aue_softc *sc, uint16_t reg)
305{
306 struct usb_device_request req;
307 usb_error_t err;
308 uint8_t val;
309
310 req.bmRequestType = UT_READ_VENDOR_DEVICE;
311 req.bRequest = AUE_UR_READREG;
312 USETW(req.wValue, 0);
313 USETW(req.wIndex, reg);
314 USETW(req.wLength, 1);
315
316 err = uether_do_request(&sc->sc_ue, &req, &val, 1000);
317 if (err)
318 return (0);
319 return (val);
320}
321
322static uint16_t
323aue_csr_read_2(struct aue_softc *sc, uint16_t reg)
324{
325 struct usb_device_request req;
326 usb_error_t err;
327 uint16_t val;
328
329 req.bmRequestType = UT_READ_VENDOR_DEVICE;
330 req.bRequest = AUE_UR_READREG;
331 USETW(req.wValue, 0);
332 USETW(req.wIndex, reg);
333 USETW(req.wLength, 2);
334
335 err = uether_do_request(&sc->sc_ue, &req, &val, 1000);
336 if (err)
337 return (0);
338 return (le16toh(val));
339}
340
341static void
342aue_csr_write_1(struct aue_softc *sc, uint16_t reg, uint8_t val)
343{
344 struct usb_device_request req;
345
346 req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
347 req.bRequest = AUE_UR_WRITEREG;
348 req.wValue[0] = val;
349 req.wValue[1] = 0;
350 USETW(req.wIndex, reg);
351 USETW(req.wLength, 1);
352
353 if (uether_do_request(&sc->sc_ue, &req, &val, 1000)) {
354 /* error ignored */
355 }
356}
357
358static void
359aue_csr_write_2(struct aue_softc *sc, uint16_t reg, uint16_t val)
360{
361 struct usb_device_request req;
362
363 req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
364 req.bRequest = AUE_UR_WRITEREG;
365 USETW(req.wValue, val);
366 USETW(req.wIndex, reg);
367 USETW(req.wLength, 2);
368
369 val = htole16(val);
370
371 if (uether_do_request(&sc->sc_ue, &req, &val, 1000)) {
372 /* error ignored */
373 }
374}
375
376/*
377 * Read a word of data stored in the EEPROM at address 'addr.'
378 */
379static void
380aue_eeprom_getword(struct aue_softc *sc, int addr, uint16_t *dest)
381{
382 int i;
383 uint16_t word = 0;
384
385 aue_csr_write_1(sc, AUE_EE_REG, addr);
386 aue_csr_write_1(sc, AUE_EE_CTL, AUE_EECTL_READ);
387
388 for (i = 0; i != AUE_TIMEOUT; i++) {
389 if (aue_csr_read_1(sc, AUE_EE_CTL) & AUE_EECTL_DONE)
390 break;
391 if (uether_pause(&sc->sc_ue, hz / 100))
392 break;
393 }
394
395 if (i == AUE_TIMEOUT)
396 device_printf(sc->sc_ue.ue_dev, "EEPROM read timed out\n");
397
398 word = aue_csr_read_2(sc, AUE_EE_DATA);
399 *dest = word;
400}
401
402/*
403 * Read a sequence of words from the EEPROM.
404 */
405static void
406aue_read_eeprom(struct aue_softc *sc, uint8_t *dest,
407 uint16_t off, uint16_t len)
408{
409 uint16_t *ptr = (uint16_t *)dest;
410 int i;
411
412 for (i = 0; i != len; i++, ptr++)
413 aue_eeprom_getword(sc, off + i, ptr);
414}
415
416static int
417aue_miibus_readreg(device_t dev, int phy, int reg)
418{
419 struct aue_softc *sc = device_get_softc(dev);
420 int i, locked;
421 uint16_t val = 0;
422
423 locked = mtx_owned(&sc->sc_mtx);
424 if (!locked)
425 AUE_LOCK(sc);
426
427 /*
428 * The Am79C901 HomePNA PHY actually contains two transceivers: a 1Mbps
429 * HomePNA PHY and a 10Mbps full/half duplex ethernet PHY with NWAY
430 * autoneg. However in the ADMtek adapter, only the 1Mbps PHY is
431 * actually connected to anything, so we ignore the 10Mbps one. It
432 * happens to be configured for MII address 3, so we filter that out.
433 */
434 if (sc->sc_flags & AUE_FLAG_DUAL_PHY) {
435 if (phy == 3)
436 goto done;
437#if 0
438 if (phy != 1)
439 goto done;
440#endif
441 }
442 aue_csr_write_1(sc, AUE_PHY_ADDR, phy);
443 aue_csr_write_1(sc, AUE_PHY_CTL, reg | AUE_PHYCTL_READ);
444
445 for (i = 0; i != AUE_TIMEOUT; i++) {
446 if (aue_csr_read_1(sc, AUE_PHY_CTL) & AUE_PHYCTL_DONE)
447 break;
448 if (uether_pause(&sc->sc_ue, hz / 100))
449 break;
450 }
451
452 if (i == AUE_TIMEOUT)
453 device_printf(sc->sc_ue.ue_dev, "MII read timed out\n");
454
455 val = aue_csr_read_2(sc, AUE_PHY_DATA);
456
457done:
458 if (!locked)
459 AUE_UNLOCK(sc);
460 return (val);
461}
462
463static int
464aue_miibus_writereg(device_t dev, int phy, int reg, int data)
465{
466 struct aue_softc *sc = device_get_softc(dev);
467 int i;
468 int locked;
469
470 if (phy == 3)
471 return (0);
472
473 locked = mtx_owned(&sc->sc_mtx);
474 if (!locked)
475 AUE_LOCK(sc);
476
477 aue_csr_write_2(sc, AUE_PHY_DATA, data);
478 aue_csr_write_1(sc, AUE_PHY_ADDR, phy);
479 aue_csr_write_1(sc, AUE_PHY_CTL, reg | AUE_PHYCTL_WRITE);
480
481 for (i = 0; i != AUE_TIMEOUT; i++) {
482 if (aue_csr_read_1(sc, AUE_PHY_CTL) & AUE_PHYCTL_DONE)
483 break;
484 if (uether_pause(&sc->sc_ue, hz / 100))
485 break;
486 }
487
488 if (i == AUE_TIMEOUT)
489 device_printf(sc->sc_ue.ue_dev, "MII write timed out\n");
490
491 if (!locked)
492 AUE_UNLOCK(sc);
493 return (0);
494}
495
496static void
497aue_miibus_statchg(device_t dev)
498{
499 struct aue_softc *sc = device_get_softc(dev);
500 struct mii_data *mii = GET_MII(sc);
501 int locked;
502
503 locked = mtx_owned(&sc->sc_mtx);
504 if (!locked)
505 AUE_LOCK(sc);
506
507 AUE_CLRBIT(sc, AUE_CTL0, AUE_CTL0_RX_ENB | AUE_CTL0_TX_ENB);
508 if (IFM_SUBTYPE(mii->mii_media_active) == IFM_100_TX)
509 AUE_SETBIT(sc, AUE_CTL1, AUE_CTL1_SPEEDSEL);
510 else
511 AUE_CLRBIT(sc, AUE_CTL1, AUE_CTL1_SPEEDSEL);
512
513 if ((mii->mii_media_active & IFM_GMASK) == IFM_FDX)
514 AUE_SETBIT(sc, AUE_CTL1, AUE_CTL1_DUPLEX);
515 else
516 AUE_CLRBIT(sc, AUE_CTL1, AUE_CTL1_DUPLEX);
517
518 AUE_SETBIT(sc, AUE_CTL0, AUE_CTL0_RX_ENB | AUE_CTL0_TX_ENB);
519
520 /*
521 * Set the LED modes on the LinkSys adapter.
522 * This turns on the 'dual link LED' bin in the auxmode
523 * register of the Broadcom PHY.
524 */
525 if (sc->sc_flags & AUE_FLAG_LSYS) {
526 uint16_t auxmode;
527
528 auxmode = aue_miibus_readreg(dev, 0, 0x1b);
529 aue_miibus_writereg(dev, 0, 0x1b, auxmode | 0x04);
530 }
531 if (!locked)
532 AUE_UNLOCK(sc);
533}
534
535#define AUE_BITS 6
536static void
537aue_setmulti(struct usb_ether *ue)
538{
539 struct aue_softc *sc = uether_getsc(ue);
540 struct ifnet *ifp = uether_getifp(ue);
541 struct ifmultiaddr *ifma;
542 uint32_t h = 0;
543 uint32_t i;
544 uint8_t hashtbl[8] = { 0, 0, 0, 0, 0, 0, 0, 0 };
545
546 AUE_LOCK_ASSERT(sc, MA_OWNED);
547
548 if (ifp->if_flags & IFF_ALLMULTI || ifp->if_flags & IFF_PROMISC) {
549 AUE_SETBIT(sc, AUE_CTL0, AUE_CTL0_ALLMULTI);
550 return;
551 }
552
553 AUE_CLRBIT(sc, AUE_CTL0, AUE_CTL0_ALLMULTI);
554
555 /* now program new ones */
556 if_maddr_rlock(ifp);
557 TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) {
558 if (ifma->ifma_addr->sa_family != AF_LINK)
559 continue;
560 h = ether_crc32_le(LLADDR((struct sockaddr_dl *)
561 ifma->ifma_addr), ETHER_ADDR_LEN) & ((1 << AUE_BITS) - 1);
562 hashtbl[(h >> 3)] |= 1 << (h & 0x7);
563 }
564 if_maddr_runlock(ifp);
565
566 /* write the hashtable */
567 for (i = 0; i != 8; i++)
568 aue_csr_write_1(sc, AUE_MAR0 + i, hashtbl[i]);
569}
570
571static void
572aue_reset_pegasus_II(struct aue_softc *sc)
573{
574 /* Magic constants taken from Linux driver. */
575 aue_csr_write_1(sc, AUE_REG_1D, 0);
576 aue_csr_write_1(sc, AUE_REG_7B, 2);
577#if 0
578 if ((sc->sc_flags & HAS_HOME_PNA) && mii_mode)
579 aue_csr_write_1(sc, AUE_REG_81, 6);
580 else
581#endif
582 aue_csr_write_1(sc, AUE_REG_81, 2);
583}
584
585static void
586aue_reset(struct aue_softc *sc)
587{
588 int i;
589
590 AUE_SETBIT(sc, AUE_CTL1, AUE_CTL1_RESETMAC);
591
592 for (i = 0; i != AUE_TIMEOUT; i++) {
593 if (!(aue_csr_read_1(sc, AUE_CTL1) & AUE_CTL1_RESETMAC))
594 break;
595 if (uether_pause(&sc->sc_ue, hz / 100))
596 break;
597 }
598
599 if (i == AUE_TIMEOUT)
600 device_printf(sc->sc_ue.ue_dev, "reset failed\n");
601
602 /*
603 * The PHY(s) attached to the Pegasus chip may be held
604 * in reset until we flip on the GPIO outputs. Make sure
605 * to set the GPIO pins high so that the PHY(s) will
606 * be enabled.
607 *
608 * NOTE: We used to force all of the GPIO pins low first and then
609 * enable the ones we want. This has been changed to better
610 * match the ADMtek's reference design to avoid setting the
611 * power-down configuration line of the PHY at the same time
612 * it is reset.
613 */
614 aue_csr_write_1(sc, AUE_GPIO0, AUE_GPIO_SEL0|AUE_GPIO_SEL1);
615 aue_csr_write_1(sc, AUE_GPIO0, AUE_GPIO_SEL0|AUE_GPIO_SEL1|AUE_GPIO_OUT0);
616
617 if (sc->sc_flags & AUE_FLAG_LSYS) {
618 /* Grrr. LinkSys has to be different from everyone else. */
619 aue_csr_write_1(sc, AUE_GPIO0, AUE_GPIO_SEL0|AUE_GPIO_SEL1);
620 aue_csr_write_1(sc, AUE_GPIO0,
621 AUE_GPIO_SEL0|AUE_GPIO_SEL1|AUE_GPIO_OUT0);
622 }
623 if (sc->sc_flags & AUE_FLAG_PII)
624 aue_reset_pegasus_II(sc);
625
626 /* Wait a little while for the chip to get its brains in order: */
627 uether_pause(&sc->sc_ue, hz / 100);
628}
629
630static void
631aue_attach_post(struct usb_ether *ue)
632{
633 struct aue_softc *sc = uether_getsc(ue);
634
635 /* reset the adapter */
636 aue_reset(sc);
637
638 /* get station address from the EEPROM */
639 aue_read_eeprom(sc, ue->ue_eaddr, 0, 3);
640}
641
642/*
643 * Probe for a Pegasus chip.
644 */
645static int
646aue_probe(device_t dev)
647{
648 struct usb_attach_arg *uaa = device_get_ivars(dev);
649
650 if (uaa->usb_mode != USB_MODE_HOST)
651 return (ENXIO);
652 if (uaa->info.bConfigIndex != AUE_CONFIG_INDEX)
653 return (ENXIO);
654 if (uaa->info.bIfaceIndex != AUE_IFACE_IDX)
655 return (ENXIO);
656 /*
657 * Belkin USB Bluetooth dongles of the F8T012xx1 model series conflict
658 * with older Belkin USB2LAN adapters. Skip if_aue if we detect one of
659 * the devices that look like Bluetooth adapters.
660 */
661 if (uaa->info.idVendor == USB_VENDOR_BELKIN &&
662 uaa->info.idProduct == USB_PRODUCT_BELKIN_F8T012 &&
663 uaa->info.bcdDevice == 0x0413)
664 return (ENXIO);
665
666 return (usbd_lookup_id_by_uaa(aue_devs, sizeof(aue_devs), uaa));
667}
668
669/*
670 * Attach the interface. Allocate softc structures, do ifmedia
671 * setup and ethernet/BPF attach.
672 */
673static int
674aue_attach(device_t dev)
675{
676 struct usb_attach_arg *uaa = device_get_ivars(dev);
677 struct aue_softc *sc = device_get_softc(dev);
678 struct usb_ether *ue = &sc->sc_ue;
679 uint8_t iface_index;
680 int error;
681
682 sc->sc_flags = USB_GET_DRIVER_INFO(uaa);
683
684 if (uaa->info.bcdDevice >= 0x0201) {
685 /* XXX currently undocumented */
686 sc->sc_flags |= AUE_FLAG_VER_2;
687 }
688
689 device_set_usb_desc(dev);
690 mtx_init(&sc->sc_mtx, device_get_nameunit(dev), NULL, MTX_DEF);
691
692 iface_index = AUE_IFACE_IDX;
693 error = usbd_transfer_setup(uaa->device, &iface_index,
694 sc->sc_xfer, aue_config, AUE_N_TRANSFER,
695 sc, &sc->sc_mtx);
696 if (error) {
697 device_printf(dev, "allocating USB transfers failed\n");
698 goto detach;
699 }
700
701 ue->ue_sc = sc;
702 ue->ue_dev = dev;
703 ue->ue_udev = uaa->device;
704 ue->ue_mtx = &sc->sc_mtx;
705 ue->ue_methods = &aue_ue_methods;
706
707 error = uether_ifattach(ue);
708 if (error) {
709 device_printf(dev, "could not attach interface\n");
710 goto detach;
711 }
712 return (0); /* success */
713
714detach:
715 aue_detach(dev);
716 return (ENXIO); /* failure */
717}
718
719static int
720aue_detach(device_t dev)
721{
722 struct aue_softc *sc = device_get_softc(dev);
723 struct usb_ether *ue = &sc->sc_ue;
724
725 usbd_transfer_unsetup(sc->sc_xfer, AUE_N_TRANSFER);
726 uether_ifdetach(ue);
727 mtx_destroy(&sc->sc_mtx);
728
729 return (0);
730}
731
732static void
733aue_intr_callback(struct usb_xfer *xfer, usb_error_t error)
734{
735 struct aue_softc *sc = usbd_xfer_softc(xfer);
736 struct ifnet *ifp = uether_getifp(&sc->sc_ue);
737 struct aue_intrpkt pkt;
738 struct usb_page_cache *pc;
739 int actlen;
740
741 usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL);
742
743 switch (USB_GET_STATE(xfer)) {
744 case USB_ST_TRANSFERRED:
745
746 if ((ifp->if_drv_flags & IFF_DRV_RUNNING) &&
747 actlen >= sizeof(pkt)) {
748
749 pc = usbd_xfer_get_frame(xfer, 0);
750 usbd_copy_out(pc, 0, &pkt, sizeof(pkt));
751
752 if (pkt.aue_txstat0)
753 ifp->if_oerrors++;
754 if (pkt.aue_txstat0 & (AUE_TXSTAT0_LATECOLL &
755 AUE_TXSTAT0_EXCESSCOLL))
756 ifp->if_collisions++;
757 }
758 /* FALLTHROUGH */
759 case USB_ST_SETUP:
760tr_setup:
761 usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer));
762 usbd_transfer_submit(xfer);
763 return;
764
765 default: /* Error */
766 if (error != USB_ERR_CANCELLED) {
767 /* try to clear stall first */
768 usbd_xfer_set_stall(xfer);
769 goto tr_setup;
770 }
771 return;
772 }
773}
774
775static void
776aue_bulk_read_callback(struct usb_xfer *xfer, usb_error_t error)
777{
778 struct aue_softc *sc = usbd_xfer_softc(xfer);
779 struct usb_ether *ue = &sc->sc_ue;
780 struct ifnet *ifp = uether_getifp(ue);
781 struct aue_rxpkt stat;
782 struct usb_page_cache *pc;
783 int actlen;
784
785 usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL);
786 pc = usbd_xfer_get_frame(xfer, 0);
787
788 switch (USB_GET_STATE(xfer)) {
789 case USB_ST_TRANSFERRED:
790 DPRINTFN(11, "received %d bytes\n", actlen);
791
792 if (sc->sc_flags & AUE_FLAG_VER_2) {
793
794 if (actlen == 0) {
795 ifp->if_ierrors++;
796 goto tr_setup;
797 }
798 } else {
799
800 if (actlen <= sizeof(stat) + ETHER_CRC_LEN) {
801 ifp->if_ierrors++;
802 goto tr_setup;
803 }
804 usbd_copy_out(pc, actlen - sizeof(stat), &stat,
805 sizeof(stat));
806
807 /*
808 * turn off all the non-error bits in the rx status
809 * word:
810 */
811 stat.aue_rxstat &= AUE_RXSTAT_MASK;
812 if (stat.aue_rxstat) {
813 ifp->if_ierrors++;
814 goto tr_setup;
815 }
816 /* No errors; receive the packet. */
817 actlen -= (sizeof(stat) + ETHER_CRC_LEN);
818 }
819 uether_rxbuf(ue, pc, 0, actlen);
820
821 /* FALLTHROUGH */
822 case USB_ST_SETUP:
823tr_setup:
824 usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer));
825 usbd_transfer_submit(xfer);
826 uether_rxflush(ue);
827 return;
828
829 default: /* Error */
830 DPRINTF("bulk read error, %s\n",
831 usbd_errstr(error));
832
833 if (error != USB_ERR_CANCELLED) {
834 /* try to clear stall first */
835 usbd_xfer_set_stall(xfer);
836 goto tr_setup;
837 }
838 return;
839 }
840}
841
842static void
843aue_bulk_write_callback(struct usb_xfer *xfer, usb_error_t error)
844{
845 struct aue_softc *sc = usbd_xfer_softc(xfer);
846 struct ifnet *ifp = uether_getifp(&sc->sc_ue);
847 struct usb_page_cache *pc;
848 struct mbuf *m;
849 uint8_t buf[2];
850 int actlen;
851
852 usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL);
853 pc = usbd_xfer_get_frame(xfer, 0);
854
855 switch (USB_GET_STATE(xfer)) {
856 case USB_ST_TRANSFERRED:
857 DPRINTFN(11, "transfer of %d bytes complete\n", actlen);
858 ifp->if_opackets++;
859
860 /* FALLTHROUGH */
861 case USB_ST_SETUP:
862tr_setup:
863 if ((sc->sc_flags & AUE_FLAG_LINK) == 0) {
864 /*
865 * don't send anything if there is no link !
866 */
867 return;
868 }
869 IFQ_DRV_DEQUEUE(&ifp->if_snd, m);
870
871 if (m == NULL)
872 return;
873 if (m->m_pkthdr.len > MCLBYTES)
874 m->m_pkthdr.len = MCLBYTES;
875 if (sc->sc_flags & AUE_FLAG_VER_2) {
876
877 usbd_xfer_set_frame_len(xfer, 0, m->m_pkthdr.len);
878
879 usbd_m_copy_in(pc, 0, m, 0, m->m_pkthdr.len);
880
881 } else {
882
883 usbd_xfer_set_frame_len(xfer, 0, (m->m_pkthdr.len + 2));
884
885 /*
886 * The ADMtek documentation says that the
887 * packet length is supposed to be specified
888 * in the first two bytes of the transfer,
889 * however it actually seems to ignore this
890 * info and base the frame size on the bulk
891 * transfer length.
892 */
893 buf[0] = (uint8_t)(m->m_pkthdr.len);
894 buf[1] = (uint8_t)(m->m_pkthdr.len >> 8);
895
896 usbd_copy_in(pc, 0, buf, 2);
897 usbd_m_copy_in(pc, 2, m, 0, m->m_pkthdr.len);
898 }
899
900 /*
901 * if there's a BPF listener, bounce a copy
902 * of this frame to him:
903 */
904 BPF_MTAP(ifp, m);
905
906 m_freem(m);
907
908 usbd_transfer_submit(xfer);
909 return;
910
911 default: /* Error */
912 DPRINTFN(11, "transfer error, %s\n",
913 usbd_errstr(error));
914
915 ifp->if_oerrors++;
916
917 if (error != USB_ERR_CANCELLED) {
918 /* try to clear stall first */
919 usbd_xfer_set_stall(xfer);
920 goto tr_setup;
921 }
922 return;
923 }
924}
925
926static void
927aue_tick(struct usb_ether *ue)
928{
929 struct aue_softc *sc = uether_getsc(ue);
930 struct mii_data *mii = GET_MII(sc);
931
932 AUE_LOCK_ASSERT(sc, MA_OWNED);
933
934 mii_tick(mii);
935 if ((sc->sc_flags & AUE_FLAG_LINK) == 0
936 && mii->mii_media_status & IFM_ACTIVE &&
937 IFM_SUBTYPE(mii->mii_media_active) != IFM_NONE) {
938 sc->sc_flags |= AUE_FLAG_LINK;
939 aue_start(ue);
940 }
941}
942
943static void
944aue_start(struct usb_ether *ue)
945{
946 struct aue_softc *sc = uether_getsc(ue);
947
948 /*
949 * start the USB transfers, if not already started:
950 */
951 usbd_transfer_start(sc->sc_xfer[AUE_INTR_DT_RD]);
952 usbd_transfer_start(sc->sc_xfer[AUE_BULK_DT_RD]);
953 usbd_transfer_start(sc->sc_xfer[AUE_BULK_DT_WR]);
954}
955
956static void
957aue_init(struct usb_ether *ue)
958{
959 struct aue_softc *sc = uether_getsc(ue);
960 struct ifnet *ifp = uether_getifp(ue);
961 int i;
962
963 AUE_LOCK_ASSERT(sc, MA_OWNED);
964
965 /*
966 * Cancel pending I/O
967 */
968 aue_reset(sc);
969
970 /* Set MAC address */
971 for (i = 0; i != ETHER_ADDR_LEN; i++)
972 aue_csr_write_1(sc, AUE_PAR0 + i, IF_LLADDR(ifp)[i]);
973
974 /* update promiscuous setting */
975 aue_setpromisc(ue);
976
977 /* Load the multicast filter. */
978 aue_setmulti(ue);
979
980 /* Enable RX and TX */
981 aue_csr_write_1(sc, AUE_CTL0, AUE_CTL0_RXSTAT_APPEND | AUE_CTL0_RX_ENB);
982 AUE_SETBIT(sc, AUE_CTL0, AUE_CTL0_TX_ENB);
983 AUE_SETBIT(sc, AUE_CTL2, AUE_CTL2_EP3_CLR);
984
985 usbd_xfer_set_stall(sc->sc_xfer[AUE_BULK_DT_WR]);
986
987 ifp->if_drv_flags |= IFF_DRV_RUNNING;
988 aue_start(ue);
989}
990
991static void
992aue_setpromisc(struct usb_ether *ue)
993{
994 struct aue_softc *sc = uether_getsc(ue);
995 struct ifnet *ifp = uether_getifp(ue);
996
997 AUE_LOCK_ASSERT(sc, MA_OWNED);
998
999 /* if we want promiscuous mode, set the allframes bit: */
1000 if (ifp->if_flags & IFF_PROMISC)
1001 AUE_SETBIT(sc, AUE_CTL2, AUE_CTL2_RX_PROMISC);
1002 else
1003 AUE_CLRBIT(sc, AUE_CTL2, AUE_CTL2_RX_PROMISC);
1004}
1005
1006/*
1007 * Set media options.
1008 */
1009static int
1010aue_ifmedia_upd(struct ifnet *ifp)
1011{
1012 struct aue_softc *sc = ifp->if_softc;
1013 struct mii_data *mii = GET_MII(sc);
1014
1015 AUE_LOCK_ASSERT(sc, MA_OWNED);
1016
1017 sc->sc_flags &= ~AUE_FLAG_LINK;
1018 if (mii->mii_instance) {
1019 struct mii_softc *miisc;
1020
1021 LIST_FOREACH(miisc, &mii->mii_phys, mii_list)
1022 mii_phy_reset(miisc);
1023 }
1024 mii_mediachg(mii);
1025 return (0);
1026}
1027
1028/*
1029 * Report current media status.
1030 */
1031static void
1032aue_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifmr)
1033{
1034 struct aue_softc *sc = ifp->if_softc;
1035 struct mii_data *mii = GET_MII(sc);
1036
1037 AUE_LOCK(sc);
1038 mii_pollstat(mii);
1039 AUE_UNLOCK(sc);
1040 ifmr->ifm_active = mii->mii_media_active;
1041 ifmr->ifm_status = mii->mii_media_status;
1042}
1043
1044/*
1045 * Stop the adapter and free any mbufs allocated to the
1046 * RX and TX lists.
1047 */
1048static void
1049aue_stop(struct usb_ether *ue)
1050{
1051 struct aue_softc *sc = uether_getsc(ue);
1052 struct ifnet *ifp = uether_getifp(ue);
1053
1054 AUE_LOCK_ASSERT(sc, MA_OWNED);
1055
1056 ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
1057 sc->sc_flags &= ~AUE_FLAG_LINK;
1058
1059 /*
1060 * stop all the transfers, if not already stopped:
1061 */
1062 usbd_transfer_stop(sc->sc_xfer[AUE_BULK_DT_WR]);
1063 usbd_transfer_stop(sc->sc_xfer[AUE_BULK_DT_RD]);
1064 usbd_transfer_stop(sc->sc_xfer[AUE_INTR_DT_RD]);
1065
1066 aue_csr_write_1(sc, AUE_CTL0, 0);
1067 aue_csr_write_1(sc, AUE_CTL1, 0);
1068 aue_reset(sc);
1069}
2 * Copyright (c) 1997, 1998, 1999, 2000
3 * Bill Paul <wpaul@ee.columbia.edu>. All rights reserved.
4 *
5 * Copyright (c) 2006
6 * Alfred Perlstein <alfred@FreeBSD.org>. All rights reserved.
7 *
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions
10 * are met:
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in the
15 * documentation and/or other materials provided with the distribution.
16 * 3. All advertising materials mentioning features or use of this software
17 * must display the following acknowledgement:
18 * This product includes software developed by Bill Paul.
19 * 4. Neither the name of the author nor the names of any co-contributors
20 * may be used to endorse or promote products derived from this software
21 * without specific prior written permission.
22 *
23 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
24 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
25 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
26 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
27 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
28 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
29 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
30 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
31 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
32 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
33 * THE POSSIBILITY OF SUCH DAMAGE.
34 */
35
36#include <sys/cdefs.h>
37__FBSDID("$FreeBSD: head/sys/dev/usb/net/if_aue.c 207077 2010-04-22 21:31:34Z thompsa $");
38
39/*
40 * ADMtek AN986 Pegasus and AN8511 Pegasus II USB to ethernet driver.
41 * Datasheet is available from http://www.admtek.com.tw.
42 *
43 * Written by Bill Paul <wpaul@ee.columbia.edu>
44 * Electrical Engineering Department
45 * Columbia University, New York City
46 *
47 * SMP locking by Alfred Perlstein <alfred@FreeBSD.org>.
48 * RED Inc.
49 */
50
51/*
52 * The Pegasus chip uses four USB "endpoints" to provide 10/100 ethernet
53 * support: the control endpoint for reading/writing registers, burst
54 * read endpoint for packet reception, burst write for packet transmission
55 * and one for "interrupts." The chip uses the same RX filter scheme
56 * as the other ADMtek ethernet parts: one perfect filter entry for the
57 * the station address and a 64-bit multicast hash table. The chip supports
58 * both MII and HomePNA attachments.
59 *
60 * Since the maximum data transfer speed of USB is supposed to be 12Mbps,
61 * you're never really going to get 100Mbps speeds from this device. I
62 * think the idea is to allow the device to connect to 10 or 100Mbps
63 * networks, not necessarily to provide 100Mbps performance. Also, since
64 * the controller uses an external PHY chip, it's possible that board
65 * designers might simply choose a 10Mbps PHY.
66 *
67 * Registers are accessed using uether_do_request(). Packet
68 * transfers are done using usbd_transfer() and friends.
69 */
70
71#include <sys/stdint.h>
72#include <sys/stddef.h>
73#include <sys/param.h>
74#include <sys/queue.h>
75#include <sys/types.h>
76#include <sys/systm.h>
77#include <sys/kernel.h>
78#include <sys/bus.h>
79#include <sys/linker_set.h>
80#include <sys/module.h>
81#include <sys/lock.h>
82#include <sys/mutex.h>
83#include <sys/condvar.h>
84#include <sys/sysctl.h>
85#include <sys/sx.h>
86#include <sys/unistd.h>
87#include <sys/callout.h>
88#include <sys/malloc.h>
89#include <sys/priv.h>
90
91#include <dev/usb/usb.h>
92#include <dev/usb/usbdi.h>
93#include <dev/usb/usbdi_util.h>
94#include "usbdevs.h"
95
96#define USB_DEBUG_VAR aue_debug
97#include <dev/usb/usb_debug.h>
98#include <dev/usb/usb_process.h>
99
100#include <dev/usb/net/usb_ethernet.h>
101#include <dev/usb/net/if_auereg.h>
102
103#ifdef USB_DEBUG
104static int aue_debug = 0;
105
106SYSCTL_NODE(_hw_usb, OID_AUTO, aue, CTLFLAG_RW, 0, "USB aue");
107SYSCTL_INT(_hw_usb_aue, OID_AUTO, debug, CTLFLAG_RW, &aue_debug, 0,
108 "Debug level");
109#endif
110
111/*
112 * Various supported device vendors/products.
113 */
114static const struct usb_device_id aue_devs[] = {
115#define AUE_DEV(v,p,i) { USB_VPI(USB_VENDOR_##v, USB_PRODUCT_##v##_##p, i) }
116 AUE_DEV(3COM, 3C460B, AUE_FLAG_PII),
117 AUE_DEV(ABOCOM, DSB650TX_PNA, 0),
118 AUE_DEV(ABOCOM, UFE1000, AUE_FLAG_LSYS),
119 AUE_DEV(ABOCOM, XX10, 0),
120 AUE_DEV(ABOCOM, XX1, AUE_FLAG_PNA | AUE_FLAG_PII),
121 AUE_DEV(ABOCOM, XX2, AUE_FLAG_PII),
122 AUE_DEV(ABOCOM, XX4, AUE_FLAG_PNA),
123 AUE_DEV(ABOCOM, XX5, AUE_FLAG_PNA),
124 AUE_DEV(ABOCOM, XX6, AUE_FLAG_PII),
125 AUE_DEV(ABOCOM, XX7, AUE_FLAG_PII),
126 AUE_DEV(ABOCOM, XX8, AUE_FLAG_PII),
127 AUE_DEV(ABOCOM, XX9, AUE_FLAG_PNA),
128 AUE_DEV(ACCTON, SS1001, AUE_FLAG_PII),
129 AUE_DEV(ACCTON, USB320_EC, 0),
130 AUE_DEV(ADMTEK, PEGASUSII_2, AUE_FLAG_PII),
131 AUE_DEV(ADMTEK, PEGASUSII_3, AUE_FLAG_PII),
132 AUE_DEV(ADMTEK, PEGASUSII_4, AUE_FLAG_PII),
133 AUE_DEV(ADMTEK, PEGASUSII, AUE_FLAG_PII),
134 AUE_DEV(ADMTEK, PEGASUS, AUE_FLAG_PNA | AUE_FLAG_DUAL_PHY),
135 AUE_DEV(AEI, FASTETHERNET, AUE_FLAG_PII),
136 AUE_DEV(ALLIEDTELESYN, ATUSB100, AUE_FLAG_PII),
137 AUE_DEV(ATEN, UC110T, AUE_FLAG_PII),
138 AUE_DEV(BELKIN, USB2LAN, AUE_FLAG_PII),
139 AUE_DEV(BILLIONTON, USB100, 0),
140 AUE_DEV(BILLIONTON, USBE100, AUE_FLAG_PII),
141 AUE_DEV(BILLIONTON, USBEL100, 0),
142 AUE_DEV(BILLIONTON, USBLP100, AUE_FLAG_PNA),
143 AUE_DEV(COREGA, FETHER_USB_TXS, AUE_FLAG_PII),
144 AUE_DEV(COREGA, FETHER_USB_TX, 0),
145 AUE_DEV(DLINK, DSB650TX1, AUE_FLAG_LSYS),
146 AUE_DEV(DLINK, DSB650TX2, AUE_FLAG_LSYS | AUE_FLAG_PII),
147 AUE_DEV(DLINK, DSB650TX3, AUE_FLAG_LSYS | AUE_FLAG_PII),
148 AUE_DEV(DLINK, DSB650TX4, AUE_FLAG_LSYS | AUE_FLAG_PII),
149 AUE_DEV(DLINK, DSB650TX_PNA, AUE_FLAG_PNA),
150 AUE_DEV(DLINK, DSB650TX, AUE_FLAG_LSYS),
151 AUE_DEV(DLINK, DSB650, AUE_FLAG_LSYS),
152 AUE_DEV(ELCON, PLAN, AUE_FLAG_PNA | AUE_FLAG_PII),
153 AUE_DEV(ELECOM, LDUSB20, AUE_FLAG_PII),
154 AUE_DEV(ELECOM, LDUSBLTX, AUE_FLAG_PII),
155 AUE_DEV(ELECOM, LDUSBTX0, 0),
156 AUE_DEV(ELECOM, LDUSBTX1, AUE_FLAG_LSYS),
157 AUE_DEV(ELECOM, LDUSBTX2, 0),
158 AUE_DEV(ELECOM, LDUSBTX3, AUE_FLAG_LSYS),
159 AUE_DEV(ELSA, USB2ETHERNET, 0),
160 AUE_DEV(GIGABYTE, GNBR402W, 0),
161 AUE_DEV(HAWKING, UF100, AUE_FLAG_PII),
162 AUE_DEV(HP, HN210E, AUE_FLAG_PII),
163 AUE_DEV(IODATA, USBETTXS, AUE_FLAG_PII),
164 AUE_DEV(IODATA, USBETTX, 0),
165 AUE_DEV(KINGSTON, KNU101TX, 0),
166 AUE_DEV(LINKSYS, USB100H1, AUE_FLAG_LSYS | AUE_FLAG_PNA),
167 AUE_DEV(LINKSYS, USB100TX, AUE_FLAG_LSYS),
168 AUE_DEV(LINKSYS, USB10TA, AUE_FLAG_LSYS),
169 AUE_DEV(LINKSYS, USB10TX1, AUE_FLAG_LSYS | AUE_FLAG_PII),
170 AUE_DEV(LINKSYS, USB10TX2, AUE_FLAG_LSYS | AUE_FLAG_PII),
171 AUE_DEV(LINKSYS, USB10T, AUE_FLAG_LSYS),
172 AUE_DEV(MELCO, LUA2TX5, AUE_FLAG_PII),
173 AUE_DEV(MELCO, LUATX1, 0),
174 AUE_DEV(MELCO, LUATX5, 0),
175 AUE_DEV(MICROSOFT, MN110, AUE_FLAG_PII),
176 AUE_DEV(NETGEAR, FA101, AUE_FLAG_PII),
177 AUE_DEV(SIEMENS, SPEEDSTREAM, AUE_FLAG_PII),
178 AUE_DEV(SIIG2, USBTOETHER, AUE_FLAG_PII),
179 AUE_DEV(SMARTBRIDGES, SMARTNIC, AUE_FLAG_PII),
180 AUE_DEV(SMC, 2202USB, 0),
181 AUE_DEV(SMC, 2206USB, AUE_FLAG_PII),
182 AUE_DEV(SOHOWARE, NUB100, 0),
183 AUE_DEV(SOHOWARE, NUB110, AUE_FLAG_PII),
184#undef AUE_DEV
185};
186
187/* prototypes */
188
189static device_probe_t aue_probe;
190static device_attach_t aue_attach;
191static device_detach_t aue_detach;
192static miibus_readreg_t aue_miibus_readreg;
193static miibus_writereg_t aue_miibus_writereg;
194static miibus_statchg_t aue_miibus_statchg;
195
196static usb_callback_t aue_intr_callback;
197static usb_callback_t aue_bulk_read_callback;
198static usb_callback_t aue_bulk_write_callback;
199
200static uether_fn_t aue_attach_post;
201static uether_fn_t aue_init;
202static uether_fn_t aue_stop;
203static uether_fn_t aue_start;
204static uether_fn_t aue_tick;
205static uether_fn_t aue_setmulti;
206static uether_fn_t aue_setpromisc;
207
208static uint8_t aue_csr_read_1(struct aue_softc *, uint16_t);
209static uint16_t aue_csr_read_2(struct aue_softc *, uint16_t);
210static void aue_csr_write_1(struct aue_softc *, uint16_t, uint8_t);
211static void aue_csr_write_2(struct aue_softc *, uint16_t, uint16_t);
212static void aue_eeprom_getword(struct aue_softc *, int, uint16_t *);
213static void aue_read_eeprom(struct aue_softc *, uint8_t *, uint16_t,
214 uint16_t);
215static void aue_reset(struct aue_softc *);
216static void aue_reset_pegasus_II(struct aue_softc *);
217
218static int aue_ifmedia_upd(struct ifnet *);
219static void aue_ifmedia_sts(struct ifnet *, struct ifmediareq *);
220
221static const struct usb_config aue_config[AUE_N_TRANSFER] = {
222
223 [AUE_BULK_DT_WR] = {
224 .type = UE_BULK,
225 .endpoint = UE_ADDR_ANY,
226 .direction = UE_DIR_OUT,
227 .bufsize = (MCLBYTES + 2),
228 .flags = {.pipe_bof = 1,.force_short_xfer = 1,},
229 .callback = aue_bulk_write_callback,
230 .timeout = 10000, /* 10 seconds */
231 },
232
233 [AUE_BULK_DT_RD] = {
234 .type = UE_BULK,
235 .endpoint = UE_ADDR_ANY,
236 .direction = UE_DIR_IN,
237 .bufsize = (MCLBYTES + 4 + ETHER_CRC_LEN),
238 .flags = {.pipe_bof = 1,.short_xfer_ok = 1,},
239 .callback = aue_bulk_read_callback,
240 },
241
242 [AUE_INTR_DT_RD] = {
243 .type = UE_INTERRUPT,
244 .endpoint = UE_ADDR_ANY,
245 .direction = UE_DIR_IN,
246 .flags = {.pipe_bof = 1,.short_xfer_ok = 1,},
247 .bufsize = 0, /* use wMaxPacketSize */
248 .callback = aue_intr_callback,
249 },
250};
251
252static device_method_t aue_methods[] = {
253 /* Device interface */
254 DEVMETHOD(device_probe, aue_probe),
255 DEVMETHOD(device_attach, aue_attach),
256 DEVMETHOD(device_detach, aue_detach),
257
258 /* bus interface */
259 DEVMETHOD(bus_print_child, bus_generic_print_child),
260 DEVMETHOD(bus_driver_added, bus_generic_driver_added),
261
262 /* MII interface */
263 DEVMETHOD(miibus_readreg, aue_miibus_readreg),
264 DEVMETHOD(miibus_writereg, aue_miibus_writereg),
265 DEVMETHOD(miibus_statchg, aue_miibus_statchg),
266
267 {0, 0}
268};
269
270static driver_t aue_driver = {
271 .name = "aue",
272 .methods = aue_methods,
273 .size = sizeof(struct aue_softc)
274};
275
276static devclass_t aue_devclass;
277
278DRIVER_MODULE(aue, uhub, aue_driver, aue_devclass, NULL, 0);
279DRIVER_MODULE(miibus, aue, miibus_driver, miibus_devclass, 0, 0);
280MODULE_DEPEND(aue, uether, 1, 1, 1);
281MODULE_DEPEND(aue, usb, 1, 1, 1);
282MODULE_DEPEND(aue, ether, 1, 1, 1);
283MODULE_DEPEND(aue, miibus, 1, 1, 1);
284
285static const struct usb_ether_methods aue_ue_methods = {
286 .ue_attach_post = aue_attach_post,
287 .ue_start = aue_start,
288 .ue_init = aue_init,
289 .ue_stop = aue_stop,
290 .ue_tick = aue_tick,
291 .ue_setmulti = aue_setmulti,
292 .ue_setpromisc = aue_setpromisc,
293 .ue_mii_upd = aue_ifmedia_upd,
294 .ue_mii_sts = aue_ifmedia_sts,
295};
296
297#define AUE_SETBIT(sc, reg, x) \
298 aue_csr_write_1(sc, reg, aue_csr_read_1(sc, reg) | (x))
299
300#define AUE_CLRBIT(sc, reg, x) \
301 aue_csr_write_1(sc, reg, aue_csr_read_1(sc, reg) & ~(x))
302
303static uint8_t
304aue_csr_read_1(struct aue_softc *sc, uint16_t reg)
305{
306 struct usb_device_request req;
307 usb_error_t err;
308 uint8_t val;
309
310 req.bmRequestType = UT_READ_VENDOR_DEVICE;
311 req.bRequest = AUE_UR_READREG;
312 USETW(req.wValue, 0);
313 USETW(req.wIndex, reg);
314 USETW(req.wLength, 1);
315
316 err = uether_do_request(&sc->sc_ue, &req, &val, 1000);
317 if (err)
318 return (0);
319 return (val);
320}
321
322static uint16_t
323aue_csr_read_2(struct aue_softc *sc, uint16_t reg)
324{
325 struct usb_device_request req;
326 usb_error_t err;
327 uint16_t val;
328
329 req.bmRequestType = UT_READ_VENDOR_DEVICE;
330 req.bRequest = AUE_UR_READREG;
331 USETW(req.wValue, 0);
332 USETW(req.wIndex, reg);
333 USETW(req.wLength, 2);
334
335 err = uether_do_request(&sc->sc_ue, &req, &val, 1000);
336 if (err)
337 return (0);
338 return (le16toh(val));
339}
340
341static void
342aue_csr_write_1(struct aue_softc *sc, uint16_t reg, uint8_t val)
343{
344 struct usb_device_request req;
345
346 req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
347 req.bRequest = AUE_UR_WRITEREG;
348 req.wValue[0] = val;
349 req.wValue[1] = 0;
350 USETW(req.wIndex, reg);
351 USETW(req.wLength, 1);
352
353 if (uether_do_request(&sc->sc_ue, &req, &val, 1000)) {
354 /* error ignored */
355 }
356}
357
358static void
359aue_csr_write_2(struct aue_softc *sc, uint16_t reg, uint16_t val)
360{
361 struct usb_device_request req;
362
363 req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
364 req.bRequest = AUE_UR_WRITEREG;
365 USETW(req.wValue, val);
366 USETW(req.wIndex, reg);
367 USETW(req.wLength, 2);
368
369 val = htole16(val);
370
371 if (uether_do_request(&sc->sc_ue, &req, &val, 1000)) {
372 /* error ignored */
373 }
374}
375
376/*
377 * Read a word of data stored in the EEPROM at address 'addr.'
378 */
379static void
380aue_eeprom_getword(struct aue_softc *sc, int addr, uint16_t *dest)
381{
382 int i;
383 uint16_t word = 0;
384
385 aue_csr_write_1(sc, AUE_EE_REG, addr);
386 aue_csr_write_1(sc, AUE_EE_CTL, AUE_EECTL_READ);
387
388 for (i = 0; i != AUE_TIMEOUT; i++) {
389 if (aue_csr_read_1(sc, AUE_EE_CTL) & AUE_EECTL_DONE)
390 break;
391 if (uether_pause(&sc->sc_ue, hz / 100))
392 break;
393 }
394
395 if (i == AUE_TIMEOUT)
396 device_printf(sc->sc_ue.ue_dev, "EEPROM read timed out\n");
397
398 word = aue_csr_read_2(sc, AUE_EE_DATA);
399 *dest = word;
400}
401
402/*
403 * Read a sequence of words from the EEPROM.
404 */
405static void
406aue_read_eeprom(struct aue_softc *sc, uint8_t *dest,
407 uint16_t off, uint16_t len)
408{
409 uint16_t *ptr = (uint16_t *)dest;
410 int i;
411
412 for (i = 0; i != len; i++, ptr++)
413 aue_eeprom_getword(sc, off + i, ptr);
414}
415
416static int
417aue_miibus_readreg(device_t dev, int phy, int reg)
418{
419 struct aue_softc *sc = device_get_softc(dev);
420 int i, locked;
421 uint16_t val = 0;
422
423 locked = mtx_owned(&sc->sc_mtx);
424 if (!locked)
425 AUE_LOCK(sc);
426
427 /*
428 * The Am79C901 HomePNA PHY actually contains two transceivers: a 1Mbps
429 * HomePNA PHY and a 10Mbps full/half duplex ethernet PHY with NWAY
430 * autoneg. However in the ADMtek adapter, only the 1Mbps PHY is
431 * actually connected to anything, so we ignore the 10Mbps one. It
432 * happens to be configured for MII address 3, so we filter that out.
433 */
434 if (sc->sc_flags & AUE_FLAG_DUAL_PHY) {
435 if (phy == 3)
436 goto done;
437#if 0
438 if (phy != 1)
439 goto done;
440#endif
441 }
442 aue_csr_write_1(sc, AUE_PHY_ADDR, phy);
443 aue_csr_write_1(sc, AUE_PHY_CTL, reg | AUE_PHYCTL_READ);
444
445 for (i = 0; i != AUE_TIMEOUT; i++) {
446 if (aue_csr_read_1(sc, AUE_PHY_CTL) & AUE_PHYCTL_DONE)
447 break;
448 if (uether_pause(&sc->sc_ue, hz / 100))
449 break;
450 }
451
452 if (i == AUE_TIMEOUT)
453 device_printf(sc->sc_ue.ue_dev, "MII read timed out\n");
454
455 val = aue_csr_read_2(sc, AUE_PHY_DATA);
456
457done:
458 if (!locked)
459 AUE_UNLOCK(sc);
460 return (val);
461}
462
463static int
464aue_miibus_writereg(device_t dev, int phy, int reg, int data)
465{
466 struct aue_softc *sc = device_get_softc(dev);
467 int i;
468 int locked;
469
470 if (phy == 3)
471 return (0);
472
473 locked = mtx_owned(&sc->sc_mtx);
474 if (!locked)
475 AUE_LOCK(sc);
476
477 aue_csr_write_2(sc, AUE_PHY_DATA, data);
478 aue_csr_write_1(sc, AUE_PHY_ADDR, phy);
479 aue_csr_write_1(sc, AUE_PHY_CTL, reg | AUE_PHYCTL_WRITE);
480
481 for (i = 0; i != AUE_TIMEOUT; i++) {
482 if (aue_csr_read_1(sc, AUE_PHY_CTL) & AUE_PHYCTL_DONE)
483 break;
484 if (uether_pause(&sc->sc_ue, hz / 100))
485 break;
486 }
487
488 if (i == AUE_TIMEOUT)
489 device_printf(sc->sc_ue.ue_dev, "MII write timed out\n");
490
491 if (!locked)
492 AUE_UNLOCK(sc);
493 return (0);
494}
495
496static void
497aue_miibus_statchg(device_t dev)
498{
499 struct aue_softc *sc = device_get_softc(dev);
500 struct mii_data *mii = GET_MII(sc);
501 int locked;
502
503 locked = mtx_owned(&sc->sc_mtx);
504 if (!locked)
505 AUE_LOCK(sc);
506
507 AUE_CLRBIT(sc, AUE_CTL0, AUE_CTL0_RX_ENB | AUE_CTL0_TX_ENB);
508 if (IFM_SUBTYPE(mii->mii_media_active) == IFM_100_TX)
509 AUE_SETBIT(sc, AUE_CTL1, AUE_CTL1_SPEEDSEL);
510 else
511 AUE_CLRBIT(sc, AUE_CTL1, AUE_CTL1_SPEEDSEL);
512
513 if ((mii->mii_media_active & IFM_GMASK) == IFM_FDX)
514 AUE_SETBIT(sc, AUE_CTL1, AUE_CTL1_DUPLEX);
515 else
516 AUE_CLRBIT(sc, AUE_CTL1, AUE_CTL1_DUPLEX);
517
518 AUE_SETBIT(sc, AUE_CTL0, AUE_CTL0_RX_ENB | AUE_CTL0_TX_ENB);
519
520 /*
521 * Set the LED modes on the LinkSys adapter.
522 * This turns on the 'dual link LED' bin in the auxmode
523 * register of the Broadcom PHY.
524 */
525 if (sc->sc_flags & AUE_FLAG_LSYS) {
526 uint16_t auxmode;
527
528 auxmode = aue_miibus_readreg(dev, 0, 0x1b);
529 aue_miibus_writereg(dev, 0, 0x1b, auxmode | 0x04);
530 }
531 if (!locked)
532 AUE_UNLOCK(sc);
533}
534
535#define AUE_BITS 6
536static void
537aue_setmulti(struct usb_ether *ue)
538{
539 struct aue_softc *sc = uether_getsc(ue);
540 struct ifnet *ifp = uether_getifp(ue);
541 struct ifmultiaddr *ifma;
542 uint32_t h = 0;
543 uint32_t i;
544 uint8_t hashtbl[8] = { 0, 0, 0, 0, 0, 0, 0, 0 };
545
546 AUE_LOCK_ASSERT(sc, MA_OWNED);
547
548 if (ifp->if_flags & IFF_ALLMULTI || ifp->if_flags & IFF_PROMISC) {
549 AUE_SETBIT(sc, AUE_CTL0, AUE_CTL0_ALLMULTI);
550 return;
551 }
552
553 AUE_CLRBIT(sc, AUE_CTL0, AUE_CTL0_ALLMULTI);
554
555 /* now program new ones */
556 if_maddr_rlock(ifp);
557 TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) {
558 if (ifma->ifma_addr->sa_family != AF_LINK)
559 continue;
560 h = ether_crc32_le(LLADDR((struct sockaddr_dl *)
561 ifma->ifma_addr), ETHER_ADDR_LEN) & ((1 << AUE_BITS) - 1);
562 hashtbl[(h >> 3)] |= 1 << (h & 0x7);
563 }
564 if_maddr_runlock(ifp);
565
566 /* write the hashtable */
567 for (i = 0; i != 8; i++)
568 aue_csr_write_1(sc, AUE_MAR0 + i, hashtbl[i]);
569}
570
571static void
572aue_reset_pegasus_II(struct aue_softc *sc)
573{
574 /* Magic constants taken from Linux driver. */
575 aue_csr_write_1(sc, AUE_REG_1D, 0);
576 aue_csr_write_1(sc, AUE_REG_7B, 2);
577#if 0
578 if ((sc->sc_flags & HAS_HOME_PNA) && mii_mode)
579 aue_csr_write_1(sc, AUE_REG_81, 6);
580 else
581#endif
582 aue_csr_write_1(sc, AUE_REG_81, 2);
583}
584
585static void
586aue_reset(struct aue_softc *sc)
587{
588 int i;
589
590 AUE_SETBIT(sc, AUE_CTL1, AUE_CTL1_RESETMAC);
591
592 for (i = 0; i != AUE_TIMEOUT; i++) {
593 if (!(aue_csr_read_1(sc, AUE_CTL1) & AUE_CTL1_RESETMAC))
594 break;
595 if (uether_pause(&sc->sc_ue, hz / 100))
596 break;
597 }
598
599 if (i == AUE_TIMEOUT)
600 device_printf(sc->sc_ue.ue_dev, "reset failed\n");
601
602 /*
603 * The PHY(s) attached to the Pegasus chip may be held
604 * in reset until we flip on the GPIO outputs. Make sure
605 * to set the GPIO pins high so that the PHY(s) will
606 * be enabled.
607 *
608 * NOTE: We used to force all of the GPIO pins low first and then
609 * enable the ones we want. This has been changed to better
610 * match the ADMtek's reference design to avoid setting the
611 * power-down configuration line of the PHY at the same time
612 * it is reset.
613 */
614 aue_csr_write_1(sc, AUE_GPIO0, AUE_GPIO_SEL0|AUE_GPIO_SEL1);
615 aue_csr_write_1(sc, AUE_GPIO0, AUE_GPIO_SEL0|AUE_GPIO_SEL1|AUE_GPIO_OUT0);
616
617 if (sc->sc_flags & AUE_FLAG_LSYS) {
618 /* Grrr. LinkSys has to be different from everyone else. */
619 aue_csr_write_1(sc, AUE_GPIO0, AUE_GPIO_SEL0|AUE_GPIO_SEL1);
620 aue_csr_write_1(sc, AUE_GPIO0,
621 AUE_GPIO_SEL0|AUE_GPIO_SEL1|AUE_GPIO_OUT0);
622 }
623 if (sc->sc_flags & AUE_FLAG_PII)
624 aue_reset_pegasus_II(sc);
625
626 /* Wait a little while for the chip to get its brains in order: */
627 uether_pause(&sc->sc_ue, hz / 100);
628}
629
630static void
631aue_attach_post(struct usb_ether *ue)
632{
633 struct aue_softc *sc = uether_getsc(ue);
634
635 /* reset the adapter */
636 aue_reset(sc);
637
638 /* get station address from the EEPROM */
639 aue_read_eeprom(sc, ue->ue_eaddr, 0, 3);
640}
641
642/*
643 * Probe for a Pegasus chip.
644 */
645static int
646aue_probe(device_t dev)
647{
648 struct usb_attach_arg *uaa = device_get_ivars(dev);
649
650 if (uaa->usb_mode != USB_MODE_HOST)
651 return (ENXIO);
652 if (uaa->info.bConfigIndex != AUE_CONFIG_INDEX)
653 return (ENXIO);
654 if (uaa->info.bIfaceIndex != AUE_IFACE_IDX)
655 return (ENXIO);
656 /*
657 * Belkin USB Bluetooth dongles of the F8T012xx1 model series conflict
658 * with older Belkin USB2LAN adapters. Skip if_aue if we detect one of
659 * the devices that look like Bluetooth adapters.
660 */
661 if (uaa->info.idVendor == USB_VENDOR_BELKIN &&
662 uaa->info.idProduct == USB_PRODUCT_BELKIN_F8T012 &&
663 uaa->info.bcdDevice == 0x0413)
664 return (ENXIO);
665
666 return (usbd_lookup_id_by_uaa(aue_devs, sizeof(aue_devs), uaa));
667}
668
669/*
670 * Attach the interface. Allocate softc structures, do ifmedia
671 * setup and ethernet/BPF attach.
672 */
673static int
674aue_attach(device_t dev)
675{
676 struct usb_attach_arg *uaa = device_get_ivars(dev);
677 struct aue_softc *sc = device_get_softc(dev);
678 struct usb_ether *ue = &sc->sc_ue;
679 uint8_t iface_index;
680 int error;
681
682 sc->sc_flags = USB_GET_DRIVER_INFO(uaa);
683
684 if (uaa->info.bcdDevice >= 0x0201) {
685 /* XXX currently undocumented */
686 sc->sc_flags |= AUE_FLAG_VER_2;
687 }
688
689 device_set_usb_desc(dev);
690 mtx_init(&sc->sc_mtx, device_get_nameunit(dev), NULL, MTX_DEF);
691
692 iface_index = AUE_IFACE_IDX;
693 error = usbd_transfer_setup(uaa->device, &iface_index,
694 sc->sc_xfer, aue_config, AUE_N_TRANSFER,
695 sc, &sc->sc_mtx);
696 if (error) {
697 device_printf(dev, "allocating USB transfers failed\n");
698 goto detach;
699 }
700
701 ue->ue_sc = sc;
702 ue->ue_dev = dev;
703 ue->ue_udev = uaa->device;
704 ue->ue_mtx = &sc->sc_mtx;
705 ue->ue_methods = &aue_ue_methods;
706
707 error = uether_ifattach(ue);
708 if (error) {
709 device_printf(dev, "could not attach interface\n");
710 goto detach;
711 }
712 return (0); /* success */
713
714detach:
715 aue_detach(dev);
716 return (ENXIO); /* failure */
717}
718
719static int
720aue_detach(device_t dev)
721{
722 struct aue_softc *sc = device_get_softc(dev);
723 struct usb_ether *ue = &sc->sc_ue;
724
725 usbd_transfer_unsetup(sc->sc_xfer, AUE_N_TRANSFER);
726 uether_ifdetach(ue);
727 mtx_destroy(&sc->sc_mtx);
728
729 return (0);
730}
731
732static void
733aue_intr_callback(struct usb_xfer *xfer, usb_error_t error)
734{
735 struct aue_softc *sc = usbd_xfer_softc(xfer);
736 struct ifnet *ifp = uether_getifp(&sc->sc_ue);
737 struct aue_intrpkt pkt;
738 struct usb_page_cache *pc;
739 int actlen;
740
741 usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL);
742
743 switch (USB_GET_STATE(xfer)) {
744 case USB_ST_TRANSFERRED:
745
746 if ((ifp->if_drv_flags & IFF_DRV_RUNNING) &&
747 actlen >= sizeof(pkt)) {
748
749 pc = usbd_xfer_get_frame(xfer, 0);
750 usbd_copy_out(pc, 0, &pkt, sizeof(pkt));
751
752 if (pkt.aue_txstat0)
753 ifp->if_oerrors++;
754 if (pkt.aue_txstat0 & (AUE_TXSTAT0_LATECOLL &
755 AUE_TXSTAT0_EXCESSCOLL))
756 ifp->if_collisions++;
757 }
758 /* FALLTHROUGH */
759 case USB_ST_SETUP:
760tr_setup:
761 usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer));
762 usbd_transfer_submit(xfer);
763 return;
764
765 default: /* Error */
766 if (error != USB_ERR_CANCELLED) {
767 /* try to clear stall first */
768 usbd_xfer_set_stall(xfer);
769 goto tr_setup;
770 }
771 return;
772 }
773}
774
775static void
776aue_bulk_read_callback(struct usb_xfer *xfer, usb_error_t error)
777{
778 struct aue_softc *sc = usbd_xfer_softc(xfer);
779 struct usb_ether *ue = &sc->sc_ue;
780 struct ifnet *ifp = uether_getifp(ue);
781 struct aue_rxpkt stat;
782 struct usb_page_cache *pc;
783 int actlen;
784
785 usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL);
786 pc = usbd_xfer_get_frame(xfer, 0);
787
788 switch (USB_GET_STATE(xfer)) {
789 case USB_ST_TRANSFERRED:
790 DPRINTFN(11, "received %d bytes\n", actlen);
791
792 if (sc->sc_flags & AUE_FLAG_VER_2) {
793
794 if (actlen == 0) {
795 ifp->if_ierrors++;
796 goto tr_setup;
797 }
798 } else {
799
800 if (actlen <= sizeof(stat) + ETHER_CRC_LEN) {
801 ifp->if_ierrors++;
802 goto tr_setup;
803 }
804 usbd_copy_out(pc, actlen - sizeof(stat), &stat,
805 sizeof(stat));
806
807 /*
808 * turn off all the non-error bits in the rx status
809 * word:
810 */
811 stat.aue_rxstat &= AUE_RXSTAT_MASK;
812 if (stat.aue_rxstat) {
813 ifp->if_ierrors++;
814 goto tr_setup;
815 }
816 /* No errors; receive the packet. */
817 actlen -= (sizeof(stat) + ETHER_CRC_LEN);
818 }
819 uether_rxbuf(ue, pc, 0, actlen);
820
821 /* FALLTHROUGH */
822 case USB_ST_SETUP:
823tr_setup:
824 usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer));
825 usbd_transfer_submit(xfer);
826 uether_rxflush(ue);
827 return;
828
829 default: /* Error */
830 DPRINTF("bulk read error, %s\n",
831 usbd_errstr(error));
832
833 if (error != USB_ERR_CANCELLED) {
834 /* try to clear stall first */
835 usbd_xfer_set_stall(xfer);
836 goto tr_setup;
837 }
838 return;
839 }
840}
841
842static void
843aue_bulk_write_callback(struct usb_xfer *xfer, usb_error_t error)
844{
845 struct aue_softc *sc = usbd_xfer_softc(xfer);
846 struct ifnet *ifp = uether_getifp(&sc->sc_ue);
847 struct usb_page_cache *pc;
848 struct mbuf *m;
849 uint8_t buf[2];
850 int actlen;
851
852 usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL);
853 pc = usbd_xfer_get_frame(xfer, 0);
854
855 switch (USB_GET_STATE(xfer)) {
856 case USB_ST_TRANSFERRED:
857 DPRINTFN(11, "transfer of %d bytes complete\n", actlen);
858 ifp->if_opackets++;
859
860 /* FALLTHROUGH */
861 case USB_ST_SETUP:
862tr_setup:
863 if ((sc->sc_flags & AUE_FLAG_LINK) == 0) {
864 /*
865 * don't send anything if there is no link !
866 */
867 return;
868 }
869 IFQ_DRV_DEQUEUE(&ifp->if_snd, m);
870
871 if (m == NULL)
872 return;
873 if (m->m_pkthdr.len > MCLBYTES)
874 m->m_pkthdr.len = MCLBYTES;
875 if (sc->sc_flags & AUE_FLAG_VER_2) {
876
877 usbd_xfer_set_frame_len(xfer, 0, m->m_pkthdr.len);
878
879 usbd_m_copy_in(pc, 0, m, 0, m->m_pkthdr.len);
880
881 } else {
882
883 usbd_xfer_set_frame_len(xfer, 0, (m->m_pkthdr.len + 2));
884
885 /*
886 * The ADMtek documentation says that the
887 * packet length is supposed to be specified
888 * in the first two bytes of the transfer,
889 * however it actually seems to ignore this
890 * info and base the frame size on the bulk
891 * transfer length.
892 */
893 buf[0] = (uint8_t)(m->m_pkthdr.len);
894 buf[1] = (uint8_t)(m->m_pkthdr.len >> 8);
895
896 usbd_copy_in(pc, 0, buf, 2);
897 usbd_m_copy_in(pc, 2, m, 0, m->m_pkthdr.len);
898 }
899
900 /*
901 * if there's a BPF listener, bounce a copy
902 * of this frame to him:
903 */
904 BPF_MTAP(ifp, m);
905
906 m_freem(m);
907
908 usbd_transfer_submit(xfer);
909 return;
910
911 default: /* Error */
912 DPRINTFN(11, "transfer error, %s\n",
913 usbd_errstr(error));
914
915 ifp->if_oerrors++;
916
917 if (error != USB_ERR_CANCELLED) {
918 /* try to clear stall first */
919 usbd_xfer_set_stall(xfer);
920 goto tr_setup;
921 }
922 return;
923 }
924}
925
926static void
927aue_tick(struct usb_ether *ue)
928{
929 struct aue_softc *sc = uether_getsc(ue);
930 struct mii_data *mii = GET_MII(sc);
931
932 AUE_LOCK_ASSERT(sc, MA_OWNED);
933
934 mii_tick(mii);
935 if ((sc->sc_flags & AUE_FLAG_LINK) == 0
936 && mii->mii_media_status & IFM_ACTIVE &&
937 IFM_SUBTYPE(mii->mii_media_active) != IFM_NONE) {
938 sc->sc_flags |= AUE_FLAG_LINK;
939 aue_start(ue);
940 }
941}
942
943static void
944aue_start(struct usb_ether *ue)
945{
946 struct aue_softc *sc = uether_getsc(ue);
947
948 /*
949 * start the USB transfers, if not already started:
950 */
951 usbd_transfer_start(sc->sc_xfer[AUE_INTR_DT_RD]);
952 usbd_transfer_start(sc->sc_xfer[AUE_BULK_DT_RD]);
953 usbd_transfer_start(sc->sc_xfer[AUE_BULK_DT_WR]);
954}
955
956static void
957aue_init(struct usb_ether *ue)
958{
959 struct aue_softc *sc = uether_getsc(ue);
960 struct ifnet *ifp = uether_getifp(ue);
961 int i;
962
963 AUE_LOCK_ASSERT(sc, MA_OWNED);
964
965 /*
966 * Cancel pending I/O
967 */
968 aue_reset(sc);
969
970 /* Set MAC address */
971 for (i = 0; i != ETHER_ADDR_LEN; i++)
972 aue_csr_write_1(sc, AUE_PAR0 + i, IF_LLADDR(ifp)[i]);
973
974 /* update promiscuous setting */
975 aue_setpromisc(ue);
976
977 /* Load the multicast filter. */
978 aue_setmulti(ue);
979
980 /* Enable RX and TX */
981 aue_csr_write_1(sc, AUE_CTL0, AUE_CTL0_RXSTAT_APPEND | AUE_CTL0_RX_ENB);
982 AUE_SETBIT(sc, AUE_CTL0, AUE_CTL0_TX_ENB);
983 AUE_SETBIT(sc, AUE_CTL2, AUE_CTL2_EP3_CLR);
984
985 usbd_xfer_set_stall(sc->sc_xfer[AUE_BULK_DT_WR]);
986
987 ifp->if_drv_flags |= IFF_DRV_RUNNING;
988 aue_start(ue);
989}
990
991static void
992aue_setpromisc(struct usb_ether *ue)
993{
994 struct aue_softc *sc = uether_getsc(ue);
995 struct ifnet *ifp = uether_getifp(ue);
996
997 AUE_LOCK_ASSERT(sc, MA_OWNED);
998
999 /* if we want promiscuous mode, set the allframes bit: */
1000 if (ifp->if_flags & IFF_PROMISC)
1001 AUE_SETBIT(sc, AUE_CTL2, AUE_CTL2_RX_PROMISC);
1002 else
1003 AUE_CLRBIT(sc, AUE_CTL2, AUE_CTL2_RX_PROMISC);
1004}
1005
1006/*
1007 * Set media options.
1008 */
1009static int
1010aue_ifmedia_upd(struct ifnet *ifp)
1011{
1012 struct aue_softc *sc = ifp->if_softc;
1013 struct mii_data *mii = GET_MII(sc);
1014
1015 AUE_LOCK_ASSERT(sc, MA_OWNED);
1016
1017 sc->sc_flags &= ~AUE_FLAG_LINK;
1018 if (mii->mii_instance) {
1019 struct mii_softc *miisc;
1020
1021 LIST_FOREACH(miisc, &mii->mii_phys, mii_list)
1022 mii_phy_reset(miisc);
1023 }
1024 mii_mediachg(mii);
1025 return (0);
1026}
1027
1028/*
1029 * Report current media status.
1030 */
1031static void
1032aue_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifmr)
1033{
1034 struct aue_softc *sc = ifp->if_softc;
1035 struct mii_data *mii = GET_MII(sc);
1036
1037 AUE_LOCK(sc);
1038 mii_pollstat(mii);
1039 AUE_UNLOCK(sc);
1040 ifmr->ifm_active = mii->mii_media_active;
1041 ifmr->ifm_status = mii->mii_media_status;
1042}
1043
1044/*
1045 * Stop the adapter and free any mbufs allocated to the
1046 * RX and TX lists.
1047 */
1048static void
1049aue_stop(struct usb_ether *ue)
1050{
1051 struct aue_softc *sc = uether_getsc(ue);
1052 struct ifnet *ifp = uether_getifp(ue);
1053
1054 AUE_LOCK_ASSERT(sc, MA_OWNED);
1055
1056 ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
1057 sc->sc_flags &= ~AUE_FLAG_LINK;
1058
1059 /*
1060 * stop all the transfers, if not already stopped:
1061 */
1062 usbd_transfer_stop(sc->sc_xfer[AUE_BULK_DT_WR]);
1063 usbd_transfer_stop(sc->sc_xfer[AUE_BULK_DT_RD]);
1064 usbd_transfer_stop(sc->sc_xfer[AUE_INTR_DT_RD]);
1065
1066 aue_csr_write_1(sc, AUE_CTL0, 0);
1067 aue_csr_write_1(sc, AUE_CTL1, 0);
1068 aue_reset(sc);
1069}