1/*-
2 * Copyright (c) 2006 Marcel Moolenaar
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 *
9 * 1. Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * 2. Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
14 *
15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
16 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
17 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
18 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
19 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
20 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
21 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
22 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
23 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
24 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
25 */
26
27#include <sys/cdefs.h>
28__FBSDID("$FreeBSD: head/sys/dev/puc/pucdata.c 251715 2013-06-13 22:13:41Z marius $");
29
30/*
31 * PCI "universal" communications card driver configuration data (used to
32 * match/attach the cards).
33 */
34
35#include <sys/param.h>
36#include <sys/systm.h>
37#include <sys/kernel.h>
38#include <sys/bus.h>
39
40#include <machine/resource.h>
41#include <machine/bus.h>
42#include <sys/rman.h>
43
44#include <dev/pci/pcivar.h>
45
46#include <dev/puc/puc_bus.h>
47#include <dev/puc/puc_cfg.h>
48#include <dev/puc/puc_bfe.h>
49
50static puc_config_f puc_config_amc;
51static puc_config_f puc_config_diva;
52static puc_config_f puc_config_exar;
53static puc_config_f puc_config_exar_pcie;
54static puc_config_f puc_config_icbook;
55static puc_config_f puc_config_moxa;
56static puc_config_f puc_config_oxford_pci954;
57static puc_config_f puc_config_oxford_pcie;
58static puc_config_f puc_config_quatech;
59static puc_config_f puc_config_syba;
60static puc_config_f puc_config_siig;
61static puc_config_f puc_config_timedia;
62static puc_config_f puc_config_titan;
63
64const struct puc_cfg puc_pci_devices[] = {
65
66 { 0x0009, 0x7168, 0xffff, 0,
67 "Sunix SUN1889",
68 DEFAULT_RCLK * 8,
69 PUC_PORT_2S, 0x10, 0, 8,
70 },
71
72 { 0x103c, 0x1048, 0x103c, 0x1049,
73 "HP Diva Serial [GSP] Multiport UART - Tosca Console",
74 DEFAULT_RCLK,
75 PUC_PORT_3S, 0x10, 0, -1,
76 .config_function = puc_config_diva
77 },
78
79 { 0x103c, 0x1048, 0x103c, 0x104a,
80 "HP Diva Serial [GSP] Multiport UART - Tosca Secondary",
81 DEFAULT_RCLK,
82 PUC_PORT_2S, 0x10, 0, -1,
83 .config_function = puc_config_diva
84 },
85
86 { 0x103c, 0x1048, 0x103c, 0x104b,
87 "HP Diva Serial [GSP] Multiport UART - Maestro SP2",
88 DEFAULT_RCLK,
89 PUC_PORT_4S, 0x10, 0, -1,
90 .config_function = puc_config_diva
91 },
92
93 { 0x103c, 0x1048, 0x103c, 0x1223,
94 "HP Diva Serial [GSP] Multiport UART - Superdome Console",
95 DEFAULT_RCLK,
96 PUC_PORT_3S, 0x10, 0, -1,
97 .config_function = puc_config_diva
98 },
99
100 { 0x103c, 0x1048, 0x103c, 0x1226,
101 "HP Diva Serial [GSP] Multiport UART - Keystone SP2",
102 DEFAULT_RCLK,
103 PUC_PORT_3S, 0x10, 0, -1,
104 .config_function = puc_config_diva
105 },
106
107 { 0x103c, 0x1048, 0x103c, 0x1282,
108 "HP Diva Serial [GSP] Multiport UART - Everest SP2",
109 DEFAULT_RCLK,
110 PUC_PORT_3S, 0x10, 0, -1,
111 .config_function = puc_config_diva
112 },
113
114 { 0x10b5, 0x1076, 0x10b5, 0x1076,
115 "VScom PCI-800",
116 DEFAULT_RCLK * 8,
117 PUC_PORT_8S, 0x18, 0, 8,
118 },
119
120 { 0x10b5, 0x1077, 0x10b5, 0x1077,
121 "VScom PCI-400",
122 DEFAULT_RCLK * 8,
123 PUC_PORT_4S, 0x18, 0, 8,
124 },
125
126 { 0x10b5, 0x1103, 0x10b5, 0x1103,
127 "VScom PCI-200",
128 DEFAULT_RCLK * 8,
129 PUC_PORT_2S, 0x18, 4, 0,
130 },
131
132 /*
133 * Boca Research Turbo Serial 658 (8 serial port) card.
134 * Appears to be the same as Chase Research PLC PCI-FAST8
135 * and Perle PCI-FAST8 Multi-Port serial cards.
136 */
137 { 0x10b5, 0x9050, 0x12e0, 0x0021,
138 "Boca Research Turbo Serial 658",
139 DEFAULT_RCLK * 4,
140 PUC_PORT_8S, 0x18, 0, 8,
141 },
142
143 { 0x10b5, 0x9050, 0x12e0, 0x0031,
144 "Boca Research Turbo Serial 654",
145 DEFAULT_RCLK * 4,
146 PUC_PORT_4S, 0x18, 0, 8,
147 },
148
149 /*
150 * Dolphin Peripherals 4035 (dual serial port) card. PLX 9050, with
151 * a seemingly-lame EEPROM setup that puts the Dolphin IDs
152 * into the subsystem fields, and claims that it's a
153 * network/misc (0x02/0x80) device.
154 */
155 { 0x10b5, 0x9050, 0xd84d, 0x6808,
156 "Dolphin Peripherals 4035",
157 DEFAULT_RCLK,
158 PUC_PORT_2S, 0x18, 4, 0,
159 },
160
161 /*
162 * Dolphin Peripherals 4014 (dual parallel port) card. PLX 9050, with
163 * a seemingly-lame EEPROM setup that puts the Dolphin IDs
164 * into the subsystem fields, and claims that it's a
165 * network/misc (0x02/0x80) device.
166 */
167 { 0x10b5, 0x9050, 0xd84d, 0x6810,
168 "Dolphin Peripherals 4014",
169 0,
170 PUC_PORT_2P, 0x20, 4, 0,
171 },
172
173 { 0x10e8, 0x818e, 0xffff, 0,
174 "Applied Micro Circuits 8 Port UART",
175 DEFAULT_RCLK,
176 PUC_PORT_8S, 0x14, -1, -1,
177 .config_function = puc_config_amc
178 },
179
180 { 0x11fe, 0x8010, 0xffff, 0,
181 "Comtrol RocketPort 550/8 RJ11 part A",
182 DEFAULT_RCLK * 4,
183 PUC_PORT_4S, 0x10, 0, 8,
184 },
185
186 { 0x11fe, 0x8011, 0xffff, 0,
187 "Comtrol RocketPort 550/8 RJ11 part B",
188 DEFAULT_RCLK * 4,
189 PUC_PORT_4S, 0x10, 0, 8,
190 },
191
192 { 0x11fe, 0x8012, 0xffff, 0,
193 "Comtrol RocketPort 550/8 Octa part A",
194 DEFAULT_RCLK * 4,
195 PUC_PORT_4S, 0x10, 0, 8,
196 },
197
198 { 0x11fe, 0x8013, 0xffff, 0,
199 "Comtrol RocketPort 550/8 Octa part B",
200 DEFAULT_RCLK * 4,
201 PUC_PORT_4S, 0x10, 0, 8,
202 },
203
204 { 0x11fe, 0x8014, 0xffff, 0,
205 "Comtrol RocketPort 550/4 RJ45",
206 DEFAULT_RCLK * 4,
207 PUC_PORT_4S, 0x10, 0, 8,
208 },
209
210 { 0x11fe, 0x8015, 0xffff, 0,
211 "Comtrol RocketPort 550/Quad",
212 DEFAULT_RCLK * 4,
213 PUC_PORT_4S, 0x10, 0, 8,
214 },
215
216 { 0x11fe, 0x8016, 0xffff, 0,
217 "Comtrol RocketPort 550/16 part A",
218 DEFAULT_RCLK * 4,
219 PUC_PORT_4S, 0x10, 0, 8,
220 },
221
222 { 0x11fe, 0x8017, 0xffff, 0,
223 "Comtrol RocketPort 550/16 part B",
224 DEFAULT_RCLK * 4,
225 PUC_PORT_12S, 0x10, 0, 8,
226 },
227
228 { 0x11fe, 0x8018, 0xffff, 0,
229 "Comtrol RocketPort 550/8 part A",
230 DEFAULT_RCLK * 4,
231 PUC_PORT_4S, 0x10, 0, 8,
232 },
233
234 { 0x11fe, 0x8019, 0xffff, 0,
235 "Comtrol RocketPort 550/8 part B",
236 DEFAULT_RCLK * 4,
237 PUC_PORT_4S, 0x10, 0, 8,
238 },
239
240 /*
241 * IBM SurePOS 300 Series (481033H) serial ports
242 * Details can be found on the IBM RSS websites
243 */
244
245 { 0x1014, 0x0297, 0xffff, 0,
246 "IBM SurePOS 300 Series (481033H) serial ports",
247 DEFAULT_RCLK,
248 PUC_PORT_4S, 0x10, 4, 0
249 },
250
251 /*
252 * SIIG Boards.
253 *
254 * SIIG provides documentation for their boards at:
255 * <URL:http://www.siig.com/downloads.asp>
256 */
257
258 { 0x131f, 0x1010, 0xffff, 0,
259 "SIIG Cyber I/O PCI 16C550 (10x family)",
260 DEFAULT_RCLK,
261 PUC_PORT_1S1P, 0x18, 4, 0,
262 },
263
264 { 0x131f, 0x1011, 0xffff, 0,
265 "SIIG Cyber I/O PCI 16C650 (10x family)",
266 DEFAULT_RCLK,
267 PUC_PORT_1S1P, 0x18, 4, 0,
268 },
269
270 { 0x131f, 0x1012, 0xffff, 0,
271 "SIIG Cyber I/O PCI 16C850 (10x family)",
272 DEFAULT_RCLK,
273 PUC_PORT_1S1P, 0x18, 4, 0,
274 },
275
276 { 0x131f, 0x1021, 0xffff, 0,
277 "SIIG Cyber Parallel Dual PCI (10x family)",
278 0,
279 PUC_PORT_2P, 0x18, 8, 0,
280 },
281
282 { 0x131f, 0x1030, 0xffff, 0,
283 "SIIG Cyber Serial Dual PCI 16C550 (10x family)",
284 DEFAULT_RCLK,
285 PUC_PORT_2S, 0x18, 4, 0,
286 },
287
288 { 0x131f, 0x1031, 0xffff, 0,
289 "SIIG Cyber Serial Dual PCI 16C650 (10x family)",
290 DEFAULT_RCLK,
291 PUC_PORT_2S, 0x18, 4, 0,
292 },
293
294 { 0x131f, 0x1032, 0xffff, 0,
295 "SIIG Cyber Serial Dual PCI 16C850 (10x family)",
296 DEFAULT_RCLK,
297 PUC_PORT_2S, 0x18, 4, 0,
298 },
299
300 { 0x131f, 0x1034, 0xffff, 0, /* XXX really? */
301 "SIIG Cyber 2S1P PCI 16C550 (10x family)",
302 DEFAULT_RCLK,
303 PUC_PORT_2S1P, 0x18, 4, 0,
304 },
305
306 { 0x131f, 0x1035, 0xffff, 0, /* XXX really? */
307 "SIIG Cyber 2S1P PCI 16C650 (10x family)",
308 DEFAULT_RCLK,
309 PUC_PORT_2S1P, 0x18, 4, 0,
310 },
311
312 { 0x131f, 0x1036, 0xffff, 0, /* XXX really? */
313 "SIIG Cyber 2S1P PCI 16C850 (10x family)",
314 DEFAULT_RCLK,
315 PUC_PORT_2S1P, 0x18, 4, 0,
316 },
317
318 { 0x131f, 0x1050, 0xffff, 0,
319 "SIIG Cyber 4S PCI 16C550 (10x family)",
320 DEFAULT_RCLK,
321 PUC_PORT_4S, 0x18, 4, 0,
322 },
323
324 { 0x131f, 0x1051, 0xffff, 0,
325 "SIIG Cyber 4S PCI 16C650 (10x family)",
326 DEFAULT_RCLK,
327 PUC_PORT_4S, 0x18, 4, 0,
328 },
329
330 { 0x131f, 0x1052, 0xffff, 0,
331 "SIIG Cyber 4S PCI 16C850 (10x family)",
332 DEFAULT_RCLK,
333 PUC_PORT_4S, 0x18, 4, 0,
334 },
335
336 { 0x131f, 0x2010, 0xffff, 0,
337 "SIIG Cyber I/O PCI 16C550 (20x family)",
338 DEFAULT_RCLK,
339 PUC_PORT_1S1P, 0x10, 4, 0,
340 },
341
342 { 0x131f, 0x2011, 0xffff, 0,
343 "SIIG Cyber I/O PCI 16C650 (20x family)",
344 DEFAULT_RCLK,
345 PUC_PORT_1S1P, 0x10, 4, 0,
346 },
347
348 { 0x131f, 0x2012, 0xffff, 0,
349 "SIIG Cyber I/O PCI 16C850 (20x family)",
350 DEFAULT_RCLK,
351 PUC_PORT_1S1P, 0x10, 4, 0,
352 },
353
354 { 0x131f, 0x2021, 0xffff, 0,
355 "SIIG Cyber Parallel Dual PCI (20x family)",
356 0,
357 PUC_PORT_2P, 0x10, 8, 0,
358 },
359
360 { 0x131f, 0x2030, 0xffff, 0,
361 "SIIG Cyber Serial Dual PCI 16C550 (20x family)",
362 DEFAULT_RCLK,
363 PUC_PORT_2S, 0x10, 4, 0,
364 },
365
366 { 0x131f, 0x2031, 0xffff, 0,
367 "SIIG Cyber Serial Dual PCI 16C650 (20x family)",
368 DEFAULT_RCLK,
369 PUC_PORT_2S, 0x10, 4, 0,
370 },
371
372 { 0x131f, 0x2032, 0xffff, 0,
373 "SIIG Cyber Serial Dual PCI 16C850 (20x family)",
374 DEFAULT_RCLK,
375 PUC_PORT_2S, 0x10, 4, 0,
376 },
377
378 { 0x131f, 0x2040, 0xffff, 0,
379 "SIIG Cyber 2P1S PCI 16C550 (20x family)",
380 DEFAULT_RCLK,
381 PUC_PORT_1S2P, 0x10, -1, 0,
382 .config_function = puc_config_siig
383 },
384
385 { 0x131f, 0x2041, 0xffff, 0,
386 "SIIG Cyber 2P1S PCI 16C650 (20x family)",
387 DEFAULT_RCLK,
388 PUC_PORT_1S2P, 0x10, -1, 0,
389 .config_function = puc_config_siig
390 },
391
392 { 0x131f, 0x2042, 0xffff, 0,
393 "SIIG Cyber 2P1S PCI 16C850 (20x family)",
394 DEFAULT_RCLK,
395 PUC_PORT_1S2P, 0x10, -1, 0,
396 .config_function = puc_config_siig
397 },
398
399 { 0x131f, 0x2050, 0xffff, 0,
400 "SIIG Cyber 4S PCI 16C550 (20x family)",
401 DEFAULT_RCLK,
402 PUC_PORT_4S, 0x10, 4, 0,
403 },
404
405 { 0x131f, 0x2051, 0xffff, 0,
406 "SIIG Cyber 4S PCI 16C650 (20x family)",
407 DEFAULT_RCLK,
408 PUC_PORT_4S, 0x10, 4, 0,
409 },
410
411 { 0x131f, 0x2052, 0xffff, 0,
412 "SIIG Cyber 4S PCI 16C850 (20x family)",
413 DEFAULT_RCLK,
414 PUC_PORT_4S, 0x10, 4, 0,
415 },
416
417 { 0x131f, 0x2060, 0xffff, 0,
418 "SIIG Cyber 2S1P PCI 16C550 (20x family)",
419 DEFAULT_RCLK,
420 PUC_PORT_2S1P, 0x10, 4, 0,
421 },
422
423 { 0x131f, 0x2061, 0xffff, 0,
424 "SIIG Cyber 2S1P PCI 16C650 (20x family)",
425 DEFAULT_RCLK,
426 PUC_PORT_2S1P, 0x10, 4, 0,
427 },
428
429 { 0x131f, 0x2062, 0xffff, 0,
430 "SIIG Cyber 2S1P PCI 16C850 (20x family)",
431 DEFAULT_RCLK,
432 PUC_PORT_2S1P, 0x10, 4, 0,
433 },
434
435 { 0x131f, 0x2081, 0xffff, 0,
436 "SIIG PS8000 8S PCI 16C650 (20x family)",
437 DEFAULT_RCLK,
438 PUC_PORT_8S, 0x10, -1, -1,
439 .config_function = puc_config_siig
440 },
441
442 { 0x135c, 0x0010, 0xffff, 0,
443 "Quatech QSC-100",
444 -3, /* max 8x clock rate */
445 PUC_PORT_4S, 0x14, 0, 8,
446 .config_function = puc_config_quatech
447 },
448
449 { 0x135c, 0x0020, 0xffff, 0,
450 "Quatech DSC-100",
451 -1, /* max 2x clock rate */
452 PUC_PORT_2S, 0x14, 0, 8,
453 .config_function = puc_config_quatech
454 },
455
456 { 0x135c, 0x0030, 0xffff, 0,
457 "Quatech DSC-200/300",
458 -1, /* max 2x clock rate */
459 PUC_PORT_2S, 0x14, 0, 8,
460 .config_function = puc_config_quatech
461 },
462
463 { 0x135c, 0x0040, 0xffff, 0,
464 "Quatech QSC-200/300",
465 -3, /* max 8x clock rate */
466 PUC_PORT_4S, 0x14, 0, 8,
467 .config_function = puc_config_quatech
468 },
469
470 { 0x135c, 0x0050, 0xffff, 0,
471 "Quatech ESC-100D",
472 -3, /* max 8x clock rate */
473 PUC_PORT_8S, 0x14, 0, 8,
474 .config_function = puc_config_quatech
475 },
476
477 { 0x135c, 0x0060, 0xffff, 0,
478 "Quatech ESC-100M",
479 -3, /* max 8x clock rate */
480 PUC_PORT_8S, 0x14, 0, 8,
481 .config_function = puc_config_quatech
482 },
483
484 { 0x135c, 0x0170, 0xffff, 0,
485 "Quatech QSCLP-100",
486 -1, /* max 2x clock rate */
487 PUC_PORT_4S, 0x18, 0, 8,
488 .config_function = puc_config_quatech
489 },
490
491 { 0x135c, 0x0180, 0xffff, 0,
492 "Quatech DSCLP-100",
493 -1, /* max 3x clock rate */
494 PUC_PORT_2S, 0x18, 0, 8,
495 .config_function = puc_config_quatech
496 },
497
498 { 0x135c, 0x01b0, 0xffff, 0,
499 "Quatech DSCLP-200/300",
500 -1, /* max 2x clock rate */
501 PUC_PORT_2S, 0x18, 0, 8,
502 .config_function = puc_config_quatech
503 },
504
505 { 0x135c, 0x01e0, 0xffff, 0,
506 "Quatech ESCLP-100",
507 -3, /* max 8x clock rate */
508 PUC_PORT_8S, 0x10, 0, 8,
509 .config_function = puc_config_quatech
510 },
511
512 { 0x1393, 0x1024, 0xffff, 0,
513 "Moxa Technologies, Smartio CP-102E/PCIe",
514 DEFAULT_RCLK * 8,
515 PUC_PORT_2S, 0x14, 0, -1,
516 .config_function = puc_config_moxa
517 },
518
519 { 0x1393, 0x1025, 0xffff, 0,
520 "Moxa Technologies, Smartio CP-102EL/PCIe",
521 DEFAULT_RCLK * 8,
522 PUC_PORT_2S, 0x14, 0, -1,
523 .config_function = puc_config_moxa
524 },
525
526 { 0x1393, 0x1040, 0xffff, 0,
527 "Moxa Technologies, Smartio C104H/PCI",
528 DEFAULT_RCLK * 8,
529 PUC_PORT_4S, 0x18, 0, 8,
530 },
531
532 { 0x1393, 0x1041, 0xffff, 0,
533 "Moxa Technologies, Smartio CP-104UL/PCI",
534 DEFAULT_RCLK * 8,
535 PUC_PORT_4S, 0x18, 0, 8,
536 },
537
538 { 0x1393, 0x1042, 0xffff, 0,
539 "Moxa Technologies, Smartio CP-104JU/PCI",
540 DEFAULT_RCLK * 8,
541 PUC_PORT_4S, 0x18, 0, 8,
542 },
543
544 { 0x1393, 0x1043, 0xffff, 0,
545 "Moxa Technologies, Smartio CP-104EL/PCIe",
546 DEFAULT_RCLK * 8,
547 PUC_PORT_4S, 0x18, 0, 8,
548 },
549
550 { 0x1393, 0x1045, 0xffff, 0,
551 "Moxa Technologies, Smartio CP-104EL-A/PCIe",
552 DEFAULT_RCLK * 8,
553 PUC_PORT_4S, 0x14, 0, -1,
554 .config_function = puc_config_moxa
555 },
556
557 { 0x1393, 0x1120, 0xffff, 0,
558 "Moxa Technologies, CP-112UL",
559 DEFAULT_RCLK * 8,
560 PUC_PORT_2S, 0x18, 0, 8,
561 },
562
563 { 0x1393, 0x1141, 0xffff, 0,
564 "Moxa Technologies, Industio CP-114",
565 DEFAULT_RCLK * 8,
566 PUC_PORT_4S, 0x18, 0, 8,
567 },
568
569 { 0x1393, 0x1144, 0xffff, 0,
570 "Moxa Technologies, Smartio CP-114EL/PCIe",
571 DEFAULT_RCLK * 8,
572 PUC_PORT_4S, 0x14, 0, -1,
573 .config_function = puc_config_moxa
574 },
575
576 { 0x1393, 0x1182, 0xffff, 0,
577 "Moxa Technologies, Smartio CP-118EL-A/PCIe",
578 DEFAULT_RCLK * 8,
579 PUC_PORT_8S, 0x14, 0, -1,
580 .config_function = puc_config_moxa
581 },
582
583 { 0x1393, 0x1680, 0xffff, 0,
584 "Moxa Technologies, C168H/PCI",
585 DEFAULT_RCLK * 8,
586 PUC_PORT_8S, 0x18, 0, 8,
587 },
588
589 { 0x1393, 0x1681, 0xffff, 0,
590 "Moxa Technologies, C168U/PCI",
591 DEFAULT_RCLK * 8,
592 PUC_PORT_8S, 0x18, 0, 8,
593 },
594
595 { 0x1393, 0x1682, 0xffff, 0,
596 "Moxa Technologies, CP-168EL/PCIe",
597 DEFAULT_RCLK * 8,
598 PUC_PORT_8S, 0x18, 0, 8,
599 },
600
601 { 0x1393, 0x1683, 0xffff, 0,
602 "Moxa Technologies, Smartio CP-168EL-A/PCIe",
603 DEFAULT_RCLK * 8,
604 PUC_PORT_8S, 0x14, 0, -1,
605 .config_function = puc_config_moxa
606 },
607
608 { 0x13a8, 0x0152, 0xffff, 0,
609 "Exar XR17C/D152",
610 DEFAULT_RCLK * 8,
611 PUC_PORT_2S, 0x10, 0, -1,
612 .config_function = puc_config_exar
613 },
614
615 { 0x13a8, 0x0154, 0xffff, 0,
616 "Exar XR17C154",
617 DEFAULT_RCLK * 8,
618 PUC_PORT_4S, 0x10, 0, -1,
619 .config_function = puc_config_exar
620 },
621
622 { 0x13a8, 0x0158, 0xffff, 0,
623 "Exar XR17C158",
624 DEFAULT_RCLK * 8,
625 PUC_PORT_8S, 0x10, 0, -1,
626 .config_function = puc_config_exar
627 },
628
629 { 0x13a8, 0x0258, 0xffff, 0,
630 "Exar XR17V258IV",
631 DEFAULT_RCLK * 8,
632 PUC_PORT_8S, 0x10, 0, -1,
633 .config_function = puc_config_exar
634 },
635
636 /* The XR17V358 uses the 125MHz PCIe clock as its reference clock. */
637 { 0x13a8, 0x0358, 0xffff, 0,
638 "Exar XR17V358",
639 125000000,
640 PUC_PORT_8S, 0x10, 0, -1,
641 .config_function = puc_config_exar_pcie
642 },
643
644 { 0x13fe, 0x1600, 0x1602, 0x0002,
645 "Advantech PCI-1602",
646 DEFAULT_RCLK * 8,
647 PUC_PORT_2S, 0x10, 0, 8,
648 },
649
650 { 0x1407, 0x0100, 0xffff, 0,
651 "Lava Computers Dual Serial",
652 DEFAULT_RCLK,
653 PUC_PORT_2S, 0x10, 4, 0,
654 },
655
656 { 0x1407, 0x0101, 0xffff, 0,
657 "Lava Computers Quatro A",
658 DEFAULT_RCLK,
659 PUC_PORT_2S, 0x10, 4, 0,
660 },
661
662 { 0x1407, 0x0102, 0xffff, 0,
663 "Lava Computers Quatro B",
664 DEFAULT_RCLK,
665 PUC_PORT_2S, 0x10, 4, 0,
666 },
667
668 { 0x1407, 0x0120, 0xffff, 0,
669 "Lava Computers Quattro-PCI A",
670 DEFAULT_RCLK,
671 PUC_PORT_2S, 0x10, 4, 0,
672 },
673
674 { 0x1407, 0x0121, 0xffff, 0,
675 "Lava Computers Quattro-PCI B",
676 DEFAULT_RCLK,
677 PUC_PORT_2S, 0x10, 4, 0,
678 },
679
680 { 0x1407, 0x0180, 0xffff, 0,
681 "Lava Computers Octo A",
682 DEFAULT_RCLK,
683 PUC_PORT_4S, 0x10, 4, 0,
684 },
685
686 { 0x1407, 0x0181, 0xffff, 0,
687 "Lava Computers Octo B",
688 DEFAULT_RCLK,
689 PUC_PORT_4S, 0x10, 4, 0,
690 },
691
692 { 0x1409, 0x7268, 0xffff, 0,
693 "Sunix SUN1888",
694 0,
695 PUC_PORT_2P, 0x10, 0, 8,
696 },
697
698 { 0x1409, 0x7168, 0xffff, 0,
699 NULL,
700 DEFAULT_RCLK * 8,
701 PUC_PORT_NONSTANDARD, 0x10, -1, -1,
702 .config_function = puc_config_timedia
703 },
704
705 /*
706 * Boards with an Oxford Semiconductor chip.
707 *
708 * Oxford Semiconductor provides documentation for their chip at:
709 * <URL:http://www.plxtech.com/products/uart/>
710 *
711 * As sold by Kouwell <URL:http://www.kouwell.com/>.
712 * I/O Flex PCI I/O Card Model-223 with 4 serial and 1 parallel ports.
713 */
714 {
715 0x1415, 0x9501, 0x10fc, 0xc070,
716 "I-O DATA RSA-PCI2/R",
717 DEFAULT_RCLK * 8,
718 PUC_PORT_2S, 0x10, 0, 8,
719 },
720
721 { 0x1415, 0x9501, 0x131f, 0x2050,
722 "SIIG Cyber 4 PCI 16550",
723 DEFAULT_RCLK * 10,
724 PUC_PORT_4S, 0x10, 0, 8,
725 },
726
727 { 0x1415, 0x9501, 0x131f, 0x2051,
728 "SIIG Cyber 4S PCI 16C650 (20x family)",
729 DEFAULT_RCLK * 10,
730 PUC_PORT_4S, 0x10, 0, 8,
731 },
732
733 { 0x1415, 0x9501, 0x131f, 0x2052,
734 "SIIG Quartet Serial 850",
735 DEFAULT_RCLK * 10,
736 PUC_PORT_4S, 0x10, 0, 8,
737 },
738
739 { 0x1415, 0x9501, 0x14db, 0x2150,
740 "Kuroutoshikou SERIAL4P-LPPCI2",
741 DEFAULT_RCLK * 10,
742 PUC_PORT_4S, 0x10, 0, 8,
743 },
744
745 { 0x1415, 0x9501, 0xffff, 0,
746 "Oxford Semiconductor OX16PCI954 UARTs",
747 0,
748 PUC_PORT_4S, 0x10, 0, 8,
749 .config_function = puc_config_oxford_pci954
750 },
751
752 { 0x1415, 0x950a, 0x131f, 0x2030,
753 "SIIG Cyber 2S PCIe",
754 DEFAULT_RCLK * 10,
755 PUC_PORT_2S, 0x10, 0, 8,
756 },
757
758 { 0x1415, 0x950a, 0x131f, 0x2032,
759 "SIIG Cyber Serial Dual PCI 16C850",
760 DEFAULT_RCLK * 10,
761 PUC_PORT_4S, 0x10, 0, 8,
762 },
763
764 { 0x1415, 0x950a, 0xffff, 0,
765 "Oxford Semiconductor OX16PCI954 UARTs",
766 DEFAULT_RCLK,
767 PUC_PORT_4S, 0x10, 0, 8,
768 },
769
770 { 0x1415, 0x9511, 0xffff, 0,
771 "Oxford Semiconductor OX9160/OX16PCI954 UARTs (function 1)",
772 DEFAULT_RCLK,
773 PUC_PORT_4S, 0x10, 0, 8,
774 },
775
776 { 0x1415, 0x9521, 0xffff, 0,
777 "Oxford Semiconductor OX16PCI952 UARTs",
778 DEFAULT_RCLK,
779 PUC_PORT_2S, 0x10, 4, 0,
780 },
781
782 { 0x1415, 0x9538, 0xffff, 0,
783 "Oxford Semiconductor OX16PCI958 UARTs",
784 DEFAULT_RCLK,
785 PUC_PORT_8S, 0x18, 0, 8,
786 },
787
788 /*
789 * Perle boards use Oxford Semiconductor chips, but they store the
790 * Oxford Semiconductor device ID as a subvendor device ID and use
791 * their own device IDs.
792 */
793
794 { 0x155f, 0x0331, 0xffff, 0,
795 "Perle Ultraport4 Express",
796 DEFAULT_RCLK * 8,
797 PUC_PORT_4S, 0x10, 0, 8,
798 },
799
800 { 0x155f, 0xB012, 0xffff, 0,
801 "Perle Speed2 LE",
802 DEFAULT_RCLK * 8,
803 PUC_PORT_2S, 0x10, 0, 8,
804 },
805
806 { 0x155f, 0xB022, 0xffff, 0,
807 "Perle Speed2 LE",
808 DEFAULT_RCLK * 8,
809 PUC_PORT_2S, 0x10, 0, 8,
810 },
811
812 { 0x155f, 0xB004, 0xffff, 0,
813 "Perle Speed4 LE",
814 DEFAULT_RCLK * 8,
815 PUC_PORT_4S, 0x10, 0, 8,
816 },
817
818 { 0x155f, 0xB008, 0xffff, 0,
819 "Perle Speed8 LE",
820 DEFAULT_RCLK * 8,
821 PUC_PORT_8S, 0x10, 0, 8,
822 },
823
824
825 /*
826 * Oxford Semiconductor PCI Express Expresso family
827 *
828 * Found in many 'native' PCI Express serial boards such as:
829 *
830 * eMegatech MP954ER4 (4 port) and MP958ER8 (8 port)
831 * <URL:http://www.emegatech.com.tw/pdrs232pcie.html>
832 *
833 * Lindy 51189 (4 port)
834 * <URL:http://www.lindy.com> <URL:http://tinyurl.com/lindy-51189>
835 *
836 * StarTech.com PEX4S952 (4 port) and PEX8S952 (8 port)
837 * <URL:http://www.startech.com>
838 */
839
840 { 0x1415, 0xc138, 0xffff, 0,
841 "Oxford Semiconductor OXPCIe952 UARTs",
842 DEFAULT_RCLK * 0x22,
843 PUC_PORT_NONSTANDARD, 0x10, 0, -1,
844 .config_function = puc_config_oxford_pcie
845 },
846
847 { 0x1415, 0xc158, 0xffff, 0,
848 "Oxford Semiconductor OXPCIe952 UARTs",
849 DEFAULT_RCLK * 0x22,
850 PUC_PORT_NONSTANDARD, 0x10, 0, -1,
851 .config_function = puc_config_oxford_pcie
852 },
853
854 { 0x1415, 0xc15d, 0xffff, 0,
855 "Oxford Semiconductor OXPCIe952 UARTs (function 1)",
856 DEFAULT_RCLK * 0x22,
857 PUC_PORT_NONSTANDARD, 0x10, 0, -1,
858 .config_function = puc_config_oxford_pcie
859 },
860
861 { 0x1415, 0xc208, 0xffff, 0,
862 "Oxford Semiconductor OXPCIe954 UARTs",
863 DEFAULT_RCLK * 0x22,
864 PUC_PORT_NONSTANDARD, 0x10, 0, -1,
865 .config_function = puc_config_oxford_pcie
866 },
867
868 { 0x1415, 0xc20d, 0xffff, 0,
869 "Oxford Semiconductor OXPCIe954 UARTs (function 1)",
870 DEFAULT_RCLK * 0x22,
871 PUC_PORT_NONSTANDARD, 0x10, 0, -1,
872 .config_function = puc_config_oxford_pcie
873 },
874
875 { 0x1415, 0xc308, 0xffff, 0,
876 "Oxford Semiconductor OXPCIe958 UARTs",
877 DEFAULT_RCLK * 0x22,
878 PUC_PORT_NONSTANDARD, 0x10, 0, -1,
879 .config_function = puc_config_oxford_pcie
880 },
881
882 { 0x1415, 0xc30d, 0xffff, 0,
883 "Oxford Semiconductor OXPCIe958 UARTs (function 1)",
884 DEFAULT_RCLK * 0x22,
885 PUC_PORT_NONSTANDARD, 0x10, 0, -1,
886 .config_function = puc_config_oxford_pcie
887 },
888
889 { 0x14d2, 0x8010, 0xffff, 0,
890 "VScom PCI-100L",
891 DEFAULT_RCLK * 8,
892 PUC_PORT_1S, 0x14, 0, 0,
893 },
894
895 { 0x14d2, 0x8020, 0xffff, 0,
896 "VScom PCI-200L",
897 DEFAULT_RCLK * 8,
898 PUC_PORT_2S, 0x14, 4, 0,
899 },
900
901 { 0x14d2, 0x8028, 0xffff, 0,
902 "VScom 200Li",
903 DEFAULT_RCLK,
904 PUC_PORT_2S, 0x20, 0, 8,
905 },
906
907 /*
908 * VScom (Titan?) PCI-800L. More modern variant of the
909 * PCI-800. Uses 6 discrete 16550 UARTs, plus another
910 * two of them obviously implemented as macro cells in
911 * the ASIC. This causes the weird port access pattern
912 * below, where two of the IO port ranges each access
913 * one of the ASIC UARTs, and a block of IO addresses
914 * access the external UARTs.
915 */
916 { 0x14d2, 0x8080, 0xffff, 0,
917 "Titan VScom PCI-800L",
918 DEFAULT_RCLK * 8,
919 PUC_PORT_8S, 0x14, -1, -1,
920 .config_function = puc_config_titan
921 },
922
923 /*
924 * VScom PCI-800H. Uses 8 16950 UART, behind a PCI chips that offers
925 * 4 com port on PCI device 0 and 4 on PCI device 1. PCI device 0 has
926 * device ID 3 and PCI device 1 device ID 4.
927 */
928 { 0x14d2, 0xa003, 0xffff, 0,
929 "Titan PCI-800H",
930 DEFAULT_RCLK * 8,
931 PUC_PORT_4S, 0x10, 0, 8,
932 },
933
934 { 0x14d2, 0xa004, 0xffff, 0,
935 "Titan PCI-800H",
936 DEFAULT_RCLK * 8,
937 PUC_PORT_4S, 0x10, 0, 8,
938 },
939
940 { 0x14d2, 0xa005, 0xffff, 0,
941 "Titan PCI-200H",
942 DEFAULT_RCLK * 8,
943 PUC_PORT_2S, 0x10, 0, 8,
944 },
945
946 { 0x14d2, 0xe020, 0xffff, 0,
947 "Titan VScom PCI-200HV2",
948 DEFAULT_RCLK * 8,
949 PUC_PORT_2S, 0x10, 4, 0,
950 },
951
952 { 0x14d2, 0xa007, 0xffff, 0,
953 "Titan VScom PCIex-800H",
954 DEFAULT_RCLK * 8,
955 PUC_PORT_4S, 0x10, 0, 8,
956 },
957
958 { 0x14d2, 0xa008, 0xffff, 0,
959 "Titan VScom PCIex-800H",
960 DEFAULT_RCLK * 8,
961 PUC_PORT_4S, 0x10, 0, 8,
962 },
963
964 { 0x14db, 0x2130, 0xffff, 0,
965 "Avlab Technology, PCI IO 2S",
966 DEFAULT_RCLK,
967 PUC_PORT_2S, 0x10, 4, 0,
968 },
969
970 { 0x14db, 0x2150, 0xffff, 0,
971 "Avlab Low Profile PCI 4 Serial",
972 DEFAULT_RCLK,
973 PUC_PORT_4S, 0x10, 4, 0,
974 },
975
976 { 0x14db, 0x2152, 0xffff, 0,
977 "Avlab Low Profile PCI 4 Serial",
978 DEFAULT_RCLK,
979 PUC_PORT_4S, 0x10, 4, 0,
980 },
981
982 { 0x1592, 0x0781, 0xffff, 0,
983 "Syba Tech Ltd. PCI-4S2P-550-ECP",
984 DEFAULT_RCLK,
985 PUC_PORT_4S1P, 0x10, 0, -1,
986 .config_function = puc_config_syba
987 },
988
989 { 0x1fd4, 0x1999, 0xffff, 0,
990 "Sunix SER5437A",
991 DEFAULT_RCLK * 8,
992 PUC_PORT_2S, 0x10, 0, 8,
993 },
994
995 { 0x5372, 0x6873, 0xffff, 0,
996 "Sun 1040 PCI Quad Serial",
997 DEFAULT_RCLK,
998 PUC_PORT_4S, 0x10, 4, 0,
999 },
1000
1001 { 0x6666, 0x0001, 0xffff, 0,
1002 "Decision Computer Inc, PCCOM 4-port serial",
1003 DEFAULT_RCLK,
1004 PUC_PORT_4S, 0x1c, 0, 8,
1005 },
1006
1007 { 0x6666, 0x0002, 0xffff, 0,
1008 "Decision Computer Inc, PCCOM 8-port serial",
1009 DEFAULT_RCLK,
1010 PUC_PORT_8S, 0x1c, 0, 8,
1011 },
1012
1013 { 0x6666, 0x0004, 0xffff, 0,
1014 "PCCOM dual port RS232/422/485",
1015 DEFAULT_RCLK,
1016 PUC_PORT_2S, 0x1c, 0, 8,
1017 },
1018
1019 { 0x9710, 0x9815, 0xffff, 0,
1020 "NetMos NM9815 Dual 1284 Printer port",
1021 0,
1022 PUC_PORT_2P, 0x10, 8, 0,
1023 },
1024
1025 /*
1026 * This is more specific than the generic NM9835 entry that follows, and
1027 * is placed here to _prevent_ puc from claiming this single port card.
1028 *
1029 * uart(4) will claim this device.
1030 */
1031 { 0x9710, 0x9835, 0x1000, 1,
1032 "NetMos NM9835 based 1-port serial",
1033 DEFAULT_RCLK,
1034 PUC_PORT_1S, 0x10, 4, 0,
1035 },
1036
1037 { 0x9710, 0x9835, 0x1000, 2,
1038 "NetMos NM9835 based 2-port serial",
1039 DEFAULT_RCLK,
1040 PUC_PORT_2S, 0x10, 4, 0,
1041 },
1042
1043 { 0x9710, 0x9835, 0xffff, 0,
1044 "NetMos NM9835 Dual UART and 1284 Printer port",
1045 DEFAULT_RCLK,
1046 PUC_PORT_2S1P, 0x10, 4, 0,
1047 },
1048
1049 { 0x9710, 0x9845, 0x1000, 0x0006,
1050 "NetMos NM9845 6 Port UART",
1051 DEFAULT_RCLK,
1052 PUC_PORT_6S, 0x10, 4, 0,
1053 },
1054
1055 { 0x9710, 0x9845, 0xffff, 0,
1056 "NetMos NM9845 Quad UART and 1284 Printer port",
1057 DEFAULT_RCLK,
1058 PUC_PORT_4S1P, 0x10, 4, 0,
1059 },
1060
1061 { 0x9710, 0x9865, 0xa000, 0x3002,
1062 "NetMos NM9865 Dual UART",
1063 DEFAULT_RCLK,
1064 PUC_PORT_2S, 0x10, 4, 0,
1065 },
1066
1067 { 0x9710, 0x9865, 0xa000, 0x3003,
1068 "NetMos NM9865 Triple UART",
1069 DEFAULT_RCLK,
1070 PUC_PORT_3S, 0x10, 4, 0,
1071 },
1072
1073 { 0x9710, 0x9865, 0xa000, 0x3004,
1074 "NetMos NM9865 Quad UART",
1075 DEFAULT_RCLK,
1076 PUC_PORT_4S, 0x10, 4, 0,
1077 },
1078
1079 { 0x9710, 0x9865, 0xa000, 0x3011,
1080 "NetMos NM9865 Single UART and 1284 Printer port",
1081 DEFAULT_RCLK,
1082 PUC_PORT_1S1P, 0x10, 4, 0,
1083 },
1084
1085 { 0x9710, 0x9865, 0xa000, 0x3012,
1086 "NetMos NM9865 Dual UART and 1284 Printer port",
1087 DEFAULT_RCLK,
1088 PUC_PORT_2S1P, 0x10, 4, 0,
1089 },
1090
1091 { 0x9710, 0x9865, 0xa000, 0x3020,
1092 "NetMos NM9865 Dual 1284 Printer port",
1093 DEFAULT_RCLK,
1094 PUC_PORT_2P, 0x10, 4, 0,
1095 },
1096
1097 { 0xb00c, 0x021c, 0xffff, 0,
1098 "IC Book Labs Gunboat x4 Lite",
1099 DEFAULT_RCLK,
1100 PUC_PORT_4S, 0x10, 0, 8,
1101 .config_function = puc_config_icbook
1102 },
1103
1104 { 0xb00c, 0x031c, 0xffff, 0,
1105 "IC Book Labs Gunboat x4 Pro",
1106 DEFAULT_RCLK,
1107 PUC_PORT_4S, 0x10, 0, 8,
1108 .config_function = puc_config_icbook
1109 },
1110
1111 { 0xb00c, 0x041c, 0xffff, 0,
1112 "IC Book Labs Ironclad x8 Lite",
1113 DEFAULT_RCLK,
1114 PUC_PORT_8S, 0x10, 0, 8,
1115 .config_function = puc_config_icbook
1116 },
1117
1118 { 0xb00c, 0x051c, 0xffff, 0,
1119 "IC Book Labs Ironclad x8 Pro",
1120 DEFAULT_RCLK,
1121 PUC_PORT_8S, 0x10, 0, 8,
1122 .config_function = puc_config_icbook
1123 },
1124
1125 { 0xb00c, 0x081c, 0xffff, 0,
1126 "IC Book Labs Dreadnought x16 Pro",
1127 DEFAULT_RCLK * 8,
1128 PUC_PORT_16S, 0x10, 0, 8,
1129 .config_function = puc_config_icbook
1130 },
1131
1132 { 0xb00c, 0x091c, 0xffff, 0,
1133 "IC Book Labs Dreadnought x16 Lite",
1134 DEFAULT_RCLK,
1135 PUC_PORT_16S, 0x10, 0, 8,
1136 .config_function = puc_config_icbook
1137 },
1138
1139 { 0xb00c, 0x0a1c, 0xffff, 0,
1140 "IC Book Labs Gunboat x2 Low Profile",
1141 DEFAULT_RCLK,
1142 PUC_PORT_2S, 0x10, 0, 8,
1143 },
1144
1145 { 0xb00c, 0x0b1c, 0xffff, 0,
1146 "IC Book Labs Gunboat x4 Low Profile",
1147 DEFAULT_RCLK,
1148 PUC_PORT_4S, 0x10, 0, 8,
1149 .config_function = puc_config_icbook
1150 },
1151
1152 { 0xffff, 0, 0xffff, 0, NULL, 0 }
1153};
1154
1155static int
1156puc_config_amc(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port,
1157 intptr_t *res)
1158{
1159 switch (cmd) {
1160 case PUC_CFG_GET_OFS:
1161 *res = 8 * (port & 1);
1162 return (0);
1163 case PUC_CFG_GET_RID:
1164 *res = 0x14 + (port >> 1) * 4;
1165 return (0);
1166 default:
1167 break;
1168 }
1169 return (ENXIO);
1170}
1171
1172static int
1173puc_config_diva(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port,
1174 intptr_t *res)
1175{
1176 const struct puc_cfg *cfg = sc->sc_cfg;
1177
1178 if (cmd == PUC_CFG_GET_OFS) {
1179 if (cfg->subdevice == 0x1282) /* Everest SP */
1180 port <<= 1;
1181 else if (cfg->subdevice == 0x104b) /* Maestro SP2 */
1182 port = (port == 3) ? 4 : port;
1183 *res = port * 8 + ((port > 2) ? 0x18 : 0);
1184 return (0);
1185 }
1186 return (ENXIO);
1187}
1188
1189static int
1190puc_config_exar(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port,
1191 intptr_t *res)
1192{
1193 if (cmd == PUC_CFG_GET_OFS) {
1194 *res = port * 0x200;
1195 return (0);
1196 }
1197 return (ENXIO);
1198}
1199
1200static int
1201puc_config_exar_pcie(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port,
1202 intptr_t *res)
1203{
1204 if (cmd == PUC_CFG_GET_OFS) {
1205 *res = port * 0x400;
1206 return (0);
1207 }
1208 return (ENXIO);
1209}
1210
1211static int
1212puc_config_icbook(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port,
1213 intptr_t *res)
1214{
1215 if (cmd == PUC_CFG_GET_ILR) {
1216 *res = PUC_ILR_DIGI;
1217 return (0);
1218 }
1219 return (ENXIO);
1220}
1221
1222static int
1223puc_config_moxa(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port,
1224 intptr_t *res)
1225{
1226 if (cmd == PUC_CFG_GET_OFS) {
1227 const struct puc_cfg *cfg = sc->sc_cfg;
1228
1229 if (port == 3 && (cfg->device == 0x1045 || cfg->device == 0x1144))
1230 port = 7;
1231 *res = port * 0x200;
1232
1233 return 0;
1234 }
1235 return (ENXIO);
1236}
1237
1238static int
1239puc_config_quatech(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port,
1240 intptr_t *res)
1241{
1242 const struct puc_cfg *cfg = sc->sc_cfg;
1243 struct puc_bar *bar;
1244 uint8_t v0, v1;
1245
1246 switch (cmd) {
1247 case PUC_CFG_SETUP:
1248 /*
1249 * Check if the scratchpad register is enabled or if the
1250 * interrupt status and options registers are active.
1251 */
1252 bar = puc_get_bar(sc, cfg->rid);
1253 if (bar == NULL)
1254 return (ENXIO);
1255 /* Set DLAB in the LCR register of UART 0. */
1256 bus_write_1(bar->b_res, 3, 0x80);
1257 /* Write 0 to the SPR register of UART 0. */
1258 bus_write_1(bar->b_res, 7, 0);
1259 /* Read back the contents of the SPR register of UART 0. */
1260 v0 = bus_read_1(bar->b_res, 7);
1261 /* Write a specific value to the SPR register of UART 0. */
1262 bus_write_1(bar->b_res, 7, 0x80 + -cfg->clock);
1263 /* Read back the contents of the SPR register of UART 0. */
1264 v1 = bus_read_1(bar->b_res, 7);
1265 /* Clear DLAB in the LCR register of UART 0. */
1266 bus_write_1(bar->b_res, 3, 0);
1267 /* Save the two values read-back from the SPR register. */
1268 sc->sc_cfg_data = (v0 << 8) | v1;
1269 if (v0 == 0 && v1 == 0x80 + -cfg->clock) {
1270 /*
1271 * The SPR register echoed the two values written
1272 * by us. This means that the SPAD jumper is set.
1273 */
1274 device_printf(sc->sc_dev, "warning: extra features "
1275 "not usable -- SPAD compatibility enabled\n");
1276 return (0);
1277 }
1278 if (v0 != 0) {
1279 /*
1280 * The first value doesn't match. This can only mean
1281 * that the SPAD jumper is not set and that a non-
1282 * standard fixed clock multiplier jumper is set.
1283 */
1284 if (bootverbose)
1285 device_printf(sc->sc_dev, "fixed clock rate "
1286 "multiplier of %d\n", 1 << v0);
1287 if (v0 < -cfg->clock)
1288 device_printf(sc->sc_dev, "warning: "
1289 "suboptimal fixed clock rate multiplier "
1290 "setting\n");
1291 return (0);
1292 }
1293 /*
1294 * The first value matched, but the second didn't. We know
1295 * that the SPAD jumper is not set. We also know that the
1296 * clock rate multiplier is software controlled *and* that
1297 * we just programmed it to the maximum allowed.
1298 */
1299 if (bootverbose)
1300 device_printf(sc->sc_dev, "clock rate multiplier of "
1301 "%d selected\n", 1 << -cfg->clock);
1302 return (0);
1303 case PUC_CFG_GET_CLOCK:
1304 v0 = (sc->sc_cfg_data >> 8) & 0xff;
1305 v1 = sc->sc_cfg_data & 0xff;
1306 if (v0 == 0 && v1 == 0x80 + -cfg->clock) {
1307 /*
1308 * XXX With the SPAD jumper applied, there's no
1309 * easy way of knowing if there's also a clock
1310 * rate multiplier jumper installed. Let's hope
1311 * not...
1312 */
1313 *res = DEFAULT_RCLK;
1314 } else if (v0 == 0) {
1315 /*
1316 * No clock rate multiplier jumper installed,
1317 * so we programmed the board with the maximum
1318 * multiplier allowed as given to us in the
1319 * clock field of the config record (negated).
1320 */
1321 *res = DEFAULT_RCLK << -cfg->clock;
1322 } else
1323 *res = DEFAULT_RCLK << v0;
1324 return (0);
1325 case PUC_CFG_GET_ILR:
1326 v0 = (sc->sc_cfg_data >> 8) & 0xff;
1327 v1 = sc->sc_cfg_data & 0xff;
1328 *res = (v0 == 0 && v1 == 0x80 + -cfg->clock)
1329 ? PUC_ILR_NONE : PUC_ILR_QUATECH;
1330 return (0);
1331 default:
1332 break;
1333 }
1334 return (ENXIO);
1335}
1336
1337static int
1338puc_config_syba(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port,
1339 intptr_t *res)
1340{
1341 static int base[] = { 0x251, 0x3f0, 0 };
1342 const struct puc_cfg *cfg = sc->sc_cfg;
1343 struct puc_bar *bar;
1344 int efir, idx, ofs;
1345 uint8_t v;
1346
1347 switch (cmd) {
1348 case PUC_CFG_SETUP:
1349 bar = puc_get_bar(sc, cfg->rid);
1350 if (bar == NULL)
1351 return (ENXIO);
1352
1353 /* configure both W83877TFs */
1354 bus_write_1(bar->b_res, 0x250, 0x89);
1355 bus_write_1(bar->b_res, 0x3f0, 0x87);
1356 bus_write_1(bar->b_res, 0x3f0, 0x87);
1357 idx = 0;
1358 while (base[idx] != 0) {
1359 efir = base[idx];
1360 bus_write_1(bar->b_res, efir, 0x09);
1361 v = bus_read_1(bar->b_res, efir + 1);
1362 if ((v & 0x0f) != 0x0c)
1363 return (ENXIO);
1364 bus_write_1(bar->b_res, efir, 0x16);
1365 v = bus_read_1(bar->b_res, efir + 1);
1366 bus_write_1(bar->b_res, efir, 0x16);
1367 bus_write_1(bar->b_res, efir + 1, v | 0x04);
1368 bus_write_1(bar->b_res, efir, 0x16);
1369 bus_write_1(bar->b_res, efir + 1, v & ~0x04);
1370 ofs = base[idx] & 0x300;
1371 bus_write_1(bar->b_res, efir, 0x23);
1372 bus_write_1(bar->b_res, efir + 1, (ofs + 0x78) >> 2);
1373 bus_write_1(bar->b_res, efir, 0x24);
1374 bus_write_1(bar->b_res, efir + 1, (ofs + 0xf8) >> 2);
1375 bus_write_1(bar->b_res, efir, 0x25);
1376 bus_write_1(bar->b_res, efir + 1, (ofs + 0xe8) >> 2);
1377 bus_write_1(bar->b_res, efir, 0x17);
1378 bus_write_1(bar->b_res, efir + 1, 0x03);
1379 bus_write_1(bar->b_res, efir, 0x28);
1380 bus_write_1(bar->b_res, efir + 1, 0x43);
1381 idx++;
1382 }
1383 bus_write_1(bar->b_res, 0x250, 0xaa);
1384 bus_write_1(bar->b_res, 0x3f0, 0xaa);
1385 return (0);
1386 case PUC_CFG_GET_OFS:
1387 switch (port) {
1388 case 0:
1389 *res = 0x2f8;
1390 return (0);
1391 case 1:
1392 *res = 0x2e8;
1393 return (0);
1394 case 2:
1395 *res = 0x3f8;
1396 return (0);
1397 case 3:
1398 *res = 0x3e8;
1399 return (0);
1400 case 4:
1401 *res = 0x278;
1402 return (0);
1403 }
1404 break;
1405 default:
1406 break;
1407 }
1408 return (ENXIO);
1409}
1410
1411static int
1412puc_config_siig(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port,
1413 intptr_t *res)
1414{
1415 const struct puc_cfg *cfg = sc->sc_cfg;
1416
1417 switch (cmd) {
1418 case PUC_CFG_GET_OFS:
1419 if (cfg->ports == PUC_PORT_8S) {
1420 *res = (port > 4) ? 8 * (port - 4) : 0;
1421 return (0);
1422 }
1423 break;
1424 case PUC_CFG_GET_RID:
1425 if (cfg->ports == PUC_PORT_8S) {
1426 *res = 0x10 + ((port > 4) ? 0x10 : 4 * port);
1427 return (0);
1428 }
1429 if (cfg->ports == PUC_PORT_2S1P) {
1430 switch (port) {
1431 case 0: *res = 0x10; return (0);
1432 case 1: *res = 0x14; return (0);
1433 case 2: *res = 0x1c; return (0);
1434 }
1435 }
1436 break;
1437 default:
1438 break;
1439 }
1440 return (ENXIO);
1441}
1442
1443static int
1444puc_config_timedia(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port,
1445 intptr_t *res)
1446{
1447 static const uint16_t dual[] = {
1448 0x0002, 0x4036, 0x4037, 0x4038, 0x4078, 0x4079, 0x4085,
1449 0x4088, 0x4089, 0x5037, 0x5078, 0x5079, 0x5085, 0x6079,
1450 0x7079, 0x8079, 0x8137, 0x8138, 0x8237, 0x8238, 0x9079,
1451 0x9137, 0x9138, 0x9237, 0x9238, 0xA079, 0xB079, 0xC079,
1452 0xD079, 0
1453 };
1454 static const uint16_t quad[] = {
1455 0x4055, 0x4056, 0x4095, 0x4096, 0x5056, 0x8156, 0x8157,
1456 0x8256, 0x8257, 0x9056, 0x9156, 0x9157, 0x9158, 0x9159,
1457 0x9256, 0x9257, 0xA056, 0xA157, 0xA158, 0xA159, 0xB056,
1458 0xB157, 0
1459 };
1460 static const uint16_t octa[] = {
1461 0x4065, 0x4066, 0x5065, 0x5066, 0x8166, 0x9066, 0x9166,
1462 0x9167, 0x9168, 0xA066, 0xA167, 0xA168, 0
1463 };
1464 static const struct {
1465 int ports;
1466 const uint16_t *ids;
1467 } subdevs[] = {
1468 { 2, dual },
1469 { 4, quad },
1470 { 8, octa },
1471 { 0, NULL }
1472 };
1473 static char desc[64];
1474 int dev, id;
1475 uint16_t subdev;
1476
1477 switch (cmd) {
1478 case PUC_CFG_GET_CLOCK:
1479 if (port < 2)
1480 *res = DEFAULT_RCLK * 8;
1481 else
1482 *res = DEFAULT_RCLK;
1483 return (0);
1484 case PUC_CFG_GET_DESC:
1485 snprintf(desc, sizeof(desc),
1486 "Timedia technology %d Port Serial", (int)sc->sc_cfg_data);
1487 *res = (intptr_t)desc;
1488 return (0);
1489 case PUC_CFG_GET_NPORTS:
1490 subdev = pci_get_subdevice(sc->sc_dev);
1491 dev = 0;
1492 while (subdevs[dev].ports != 0) {
1493 id = 0;
1494 while (subdevs[dev].ids[id] != 0) {
1495 if (subdev == subdevs[dev].ids[id]) {
1496 sc->sc_cfg_data = subdevs[dev].ports;
1497 *res = sc->sc_cfg_data;
1498 return (0);
1499 }
1500 id++;
1501 }
1502 dev++;
1503 }
1504 return (ENXIO);
1505 case PUC_CFG_GET_OFS:
1506 *res = (port == 1 || port == 3) ? 8 : 0;
1507 return (0);
1508 case PUC_CFG_GET_RID:
1509 *res = 0x10 + ((port > 3) ? port - 2 : port >> 1) * 4;
1510 return (0);
1511 case PUC_CFG_GET_TYPE:
1512 *res = PUC_TYPE_SERIAL;
1513 return (0);
1514 default:
1515 break;
1516 }
1517 return (ENXIO);
1518}
1519
1520static int
1521puc_config_oxford_pci954(struct puc_softc *sc, enum puc_cfg_cmd cmd,
1522 int port __unused, intptr_t *res)
1523{
1524
1525 switch (cmd) {
1526 case PUC_CFG_GET_CLOCK:
1527 /*
1528 * OXu16PCI954 use a 14.7456 MHz clock by default while
1529 * OX16PCI954 and OXm16PCI954 employ a 1.8432 MHz one.
1530 */
1531 if (pci_get_revid(sc->sc_dev) == 1)
1532 *res = DEFAULT_RCLK * 8;
1533 else
1534 *res = DEFAULT_RCLK;
1535 return (0);
1536 default:
1537 break;
1538 }
1539 return (ENXIO);
1540}
1541
1542static int
1543puc_config_oxford_pcie(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port,
1544 intptr_t *res)
1545{
1546 const struct puc_cfg *cfg = sc->sc_cfg;
1547 int idx;
1548 struct puc_bar *bar;
1549 uint8_t value;
1550
1551 switch (cmd) {
1552 case PUC_CFG_SETUP:
1553 device_printf(sc->sc_dev, "%d UARTs detected\n",
1554 sc->sc_nports);
1555
1556 /* Set UARTs to enhanced mode */
1557 bar = puc_get_bar(sc, cfg->rid);
1558 if (bar == NULL)
1559 return (ENXIO);
1560 for (idx = 0; idx < sc->sc_nports; idx++) {
1561 value = bus_read_1(bar->b_res, 0x1000 + (idx << 9) +
1562 0x92);
1563 bus_write_1(bar->b_res, 0x1000 + (idx << 9) + 0x92,
1564 value | 0x10);
1565 }
1566 return (0);
1567 case PUC_CFG_GET_LEN:
1568 *res = 0x200;
1569 return (0);
1570 case PUC_CFG_GET_NPORTS:
1571 /*
1572 * Check if we are being called from puc_bfe_attach()
1573 * or puc_bfe_probe(). If puc_bfe_probe(), we cannot
1574 * puc_get_bar(), so we return a value of 16. This has cosmetic
1575 * side-effects at worst; in PUC_CFG_GET_DESC,
1576 * (int)sc->sc_cfg_data will not contain the true number of
1577 * ports in PUC_CFG_GET_DESC, but we are not implementing that
1578 * call for this device family anyway.
1579 *
1580 * The check is for initialisation of sc->sc_bar[idx], which is
1581 * only done in puc_bfe_attach().
1582 */
1583 idx = 0;
1584 do {
1585 if (sc->sc_bar[idx++].b_rid != -1) {
1586 sc->sc_cfg_data = 16;
1587 *res = sc->sc_cfg_data;
1588 return (0);
1589 }
1590 } while (idx < PUC_PCI_BARS);
1591
1592 bar = puc_get_bar(sc, cfg->rid);
1593 if (bar == NULL)
1594 return (ENXIO);
1595
1596 value = bus_read_1(bar->b_res, 0x04);
1597 if (value == 0)
1598 return (ENXIO);
1599
1600 sc->sc_cfg_data = value;
1601 *res = sc->sc_cfg_data;
1602 return (0);
1603 case PUC_CFG_GET_OFS:
1604 *res = 0x1000 + (port << 9);
1605 return (0);
1606 case PUC_CFG_GET_TYPE:
1607 *res = PUC_TYPE_SERIAL;
1608 return (0);
1609 default:
1610 break;
1611 }
1612 return (ENXIO);
1613}
1614
1615static int
1616puc_config_titan(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port,
1617 intptr_t *res)
1618{
1619 switch (cmd) {
1620 case PUC_CFG_GET_OFS:
1621 *res = (port < 3) ? 0 : (port - 2) << 3;
1622 return (0);
1623 case PUC_CFG_GET_RID:
1624 *res = 0x14 + ((port >= 2) ? 0x0c : port << 2);
1625 return (0);
1626 default:
1627 break;
1628 }
1629 return (ENXIO);
1630}
2 * Copyright (c) 2006 Marcel Moolenaar
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 *
9 * 1. Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * 2. Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
14 *
15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
16 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
17 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
18 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
19 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
20 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
21 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
22 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
23 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
24 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
25 */
26
27#include <sys/cdefs.h>
28__FBSDID("$FreeBSD: head/sys/dev/puc/pucdata.c 251715 2013-06-13 22:13:41Z marius $");
29
30/*
31 * PCI "universal" communications card driver configuration data (used to
32 * match/attach the cards).
33 */
34
35#include <sys/param.h>
36#include <sys/systm.h>
37#include <sys/kernel.h>
38#include <sys/bus.h>
39
40#include <machine/resource.h>
41#include <machine/bus.h>
42#include <sys/rman.h>
43
44#include <dev/pci/pcivar.h>
45
46#include <dev/puc/puc_bus.h>
47#include <dev/puc/puc_cfg.h>
48#include <dev/puc/puc_bfe.h>
49
50static puc_config_f puc_config_amc;
51static puc_config_f puc_config_diva;
52static puc_config_f puc_config_exar;
53static puc_config_f puc_config_exar_pcie;
54static puc_config_f puc_config_icbook;
55static puc_config_f puc_config_moxa;
56static puc_config_f puc_config_oxford_pci954;
57static puc_config_f puc_config_oxford_pcie;
58static puc_config_f puc_config_quatech;
59static puc_config_f puc_config_syba;
60static puc_config_f puc_config_siig;
61static puc_config_f puc_config_timedia;
62static puc_config_f puc_config_titan;
63
64const struct puc_cfg puc_pci_devices[] = {
65
66 { 0x0009, 0x7168, 0xffff, 0,
67 "Sunix SUN1889",
68 DEFAULT_RCLK * 8,
69 PUC_PORT_2S, 0x10, 0, 8,
70 },
71
72 { 0x103c, 0x1048, 0x103c, 0x1049,
73 "HP Diva Serial [GSP] Multiport UART - Tosca Console",
74 DEFAULT_RCLK,
75 PUC_PORT_3S, 0x10, 0, -1,
76 .config_function = puc_config_diva
77 },
78
79 { 0x103c, 0x1048, 0x103c, 0x104a,
80 "HP Diva Serial [GSP] Multiport UART - Tosca Secondary",
81 DEFAULT_RCLK,
82 PUC_PORT_2S, 0x10, 0, -1,
83 .config_function = puc_config_diva
84 },
85
86 { 0x103c, 0x1048, 0x103c, 0x104b,
87 "HP Diva Serial [GSP] Multiport UART - Maestro SP2",
88 DEFAULT_RCLK,
89 PUC_PORT_4S, 0x10, 0, -1,
90 .config_function = puc_config_diva
91 },
92
93 { 0x103c, 0x1048, 0x103c, 0x1223,
94 "HP Diva Serial [GSP] Multiport UART - Superdome Console",
95 DEFAULT_RCLK,
96 PUC_PORT_3S, 0x10, 0, -1,
97 .config_function = puc_config_diva
98 },
99
100 { 0x103c, 0x1048, 0x103c, 0x1226,
101 "HP Diva Serial [GSP] Multiport UART - Keystone SP2",
102 DEFAULT_RCLK,
103 PUC_PORT_3S, 0x10, 0, -1,
104 .config_function = puc_config_diva
105 },
106
107 { 0x103c, 0x1048, 0x103c, 0x1282,
108 "HP Diva Serial [GSP] Multiport UART - Everest SP2",
109 DEFAULT_RCLK,
110 PUC_PORT_3S, 0x10, 0, -1,
111 .config_function = puc_config_diva
112 },
113
114 { 0x10b5, 0x1076, 0x10b5, 0x1076,
115 "VScom PCI-800",
116 DEFAULT_RCLK * 8,
117 PUC_PORT_8S, 0x18, 0, 8,
118 },
119
120 { 0x10b5, 0x1077, 0x10b5, 0x1077,
121 "VScom PCI-400",
122 DEFAULT_RCLK * 8,
123 PUC_PORT_4S, 0x18, 0, 8,
124 },
125
126 { 0x10b5, 0x1103, 0x10b5, 0x1103,
127 "VScom PCI-200",
128 DEFAULT_RCLK * 8,
129 PUC_PORT_2S, 0x18, 4, 0,
130 },
131
132 /*
133 * Boca Research Turbo Serial 658 (8 serial port) card.
134 * Appears to be the same as Chase Research PLC PCI-FAST8
135 * and Perle PCI-FAST8 Multi-Port serial cards.
136 */
137 { 0x10b5, 0x9050, 0x12e0, 0x0021,
138 "Boca Research Turbo Serial 658",
139 DEFAULT_RCLK * 4,
140 PUC_PORT_8S, 0x18, 0, 8,
141 },
142
143 { 0x10b5, 0x9050, 0x12e0, 0x0031,
144 "Boca Research Turbo Serial 654",
145 DEFAULT_RCLK * 4,
146 PUC_PORT_4S, 0x18, 0, 8,
147 },
148
149 /*
150 * Dolphin Peripherals 4035 (dual serial port) card. PLX 9050, with
151 * a seemingly-lame EEPROM setup that puts the Dolphin IDs
152 * into the subsystem fields, and claims that it's a
153 * network/misc (0x02/0x80) device.
154 */
155 { 0x10b5, 0x9050, 0xd84d, 0x6808,
156 "Dolphin Peripherals 4035",
157 DEFAULT_RCLK,
158 PUC_PORT_2S, 0x18, 4, 0,
159 },
160
161 /*
162 * Dolphin Peripherals 4014 (dual parallel port) card. PLX 9050, with
163 * a seemingly-lame EEPROM setup that puts the Dolphin IDs
164 * into the subsystem fields, and claims that it's a
165 * network/misc (0x02/0x80) device.
166 */
167 { 0x10b5, 0x9050, 0xd84d, 0x6810,
168 "Dolphin Peripherals 4014",
169 0,
170 PUC_PORT_2P, 0x20, 4, 0,
171 },
172
173 { 0x10e8, 0x818e, 0xffff, 0,
174 "Applied Micro Circuits 8 Port UART",
175 DEFAULT_RCLK,
176 PUC_PORT_8S, 0x14, -1, -1,
177 .config_function = puc_config_amc
178 },
179
180 { 0x11fe, 0x8010, 0xffff, 0,
181 "Comtrol RocketPort 550/8 RJ11 part A",
182 DEFAULT_RCLK * 4,
183 PUC_PORT_4S, 0x10, 0, 8,
184 },
185
186 { 0x11fe, 0x8011, 0xffff, 0,
187 "Comtrol RocketPort 550/8 RJ11 part B",
188 DEFAULT_RCLK * 4,
189 PUC_PORT_4S, 0x10, 0, 8,
190 },
191
192 { 0x11fe, 0x8012, 0xffff, 0,
193 "Comtrol RocketPort 550/8 Octa part A",
194 DEFAULT_RCLK * 4,
195 PUC_PORT_4S, 0x10, 0, 8,
196 },
197
198 { 0x11fe, 0x8013, 0xffff, 0,
199 "Comtrol RocketPort 550/8 Octa part B",
200 DEFAULT_RCLK * 4,
201 PUC_PORT_4S, 0x10, 0, 8,
202 },
203
204 { 0x11fe, 0x8014, 0xffff, 0,
205 "Comtrol RocketPort 550/4 RJ45",
206 DEFAULT_RCLK * 4,
207 PUC_PORT_4S, 0x10, 0, 8,
208 },
209
210 { 0x11fe, 0x8015, 0xffff, 0,
211 "Comtrol RocketPort 550/Quad",
212 DEFAULT_RCLK * 4,
213 PUC_PORT_4S, 0x10, 0, 8,
214 },
215
216 { 0x11fe, 0x8016, 0xffff, 0,
217 "Comtrol RocketPort 550/16 part A",
218 DEFAULT_RCLK * 4,
219 PUC_PORT_4S, 0x10, 0, 8,
220 },
221
222 { 0x11fe, 0x8017, 0xffff, 0,
223 "Comtrol RocketPort 550/16 part B",
224 DEFAULT_RCLK * 4,
225 PUC_PORT_12S, 0x10, 0, 8,
226 },
227
228 { 0x11fe, 0x8018, 0xffff, 0,
229 "Comtrol RocketPort 550/8 part A",
230 DEFAULT_RCLK * 4,
231 PUC_PORT_4S, 0x10, 0, 8,
232 },
233
234 { 0x11fe, 0x8019, 0xffff, 0,
235 "Comtrol RocketPort 550/8 part B",
236 DEFAULT_RCLK * 4,
237 PUC_PORT_4S, 0x10, 0, 8,
238 },
239
240 /*
241 * IBM SurePOS 300 Series (481033H) serial ports
242 * Details can be found on the IBM RSS websites
243 */
244
245 { 0x1014, 0x0297, 0xffff, 0,
246 "IBM SurePOS 300 Series (481033H) serial ports",
247 DEFAULT_RCLK,
248 PUC_PORT_4S, 0x10, 4, 0
249 },
250
251 /*
252 * SIIG Boards.
253 *
254 * SIIG provides documentation for their boards at:
255 * <URL:http://www.siig.com/downloads.asp>
256 */
257
258 { 0x131f, 0x1010, 0xffff, 0,
259 "SIIG Cyber I/O PCI 16C550 (10x family)",
260 DEFAULT_RCLK,
261 PUC_PORT_1S1P, 0x18, 4, 0,
262 },
263
264 { 0x131f, 0x1011, 0xffff, 0,
265 "SIIG Cyber I/O PCI 16C650 (10x family)",
266 DEFAULT_RCLK,
267 PUC_PORT_1S1P, 0x18, 4, 0,
268 },
269
270 { 0x131f, 0x1012, 0xffff, 0,
271 "SIIG Cyber I/O PCI 16C850 (10x family)",
272 DEFAULT_RCLK,
273 PUC_PORT_1S1P, 0x18, 4, 0,
274 },
275
276 { 0x131f, 0x1021, 0xffff, 0,
277 "SIIG Cyber Parallel Dual PCI (10x family)",
278 0,
279 PUC_PORT_2P, 0x18, 8, 0,
280 },
281
282 { 0x131f, 0x1030, 0xffff, 0,
283 "SIIG Cyber Serial Dual PCI 16C550 (10x family)",
284 DEFAULT_RCLK,
285 PUC_PORT_2S, 0x18, 4, 0,
286 },
287
288 { 0x131f, 0x1031, 0xffff, 0,
289 "SIIG Cyber Serial Dual PCI 16C650 (10x family)",
290 DEFAULT_RCLK,
291 PUC_PORT_2S, 0x18, 4, 0,
292 },
293
294 { 0x131f, 0x1032, 0xffff, 0,
295 "SIIG Cyber Serial Dual PCI 16C850 (10x family)",
296 DEFAULT_RCLK,
297 PUC_PORT_2S, 0x18, 4, 0,
298 },
299
300 { 0x131f, 0x1034, 0xffff, 0, /* XXX really? */
301 "SIIG Cyber 2S1P PCI 16C550 (10x family)",
302 DEFAULT_RCLK,
303 PUC_PORT_2S1P, 0x18, 4, 0,
304 },
305
306 { 0x131f, 0x1035, 0xffff, 0, /* XXX really? */
307 "SIIG Cyber 2S1P PCI 16C650 (10x family)",
308 DEFAULT_RCLK,
309 PUC_PORT_2S1P, 0x18, 4, 0,
310 },
311
312 { 0x131f, 0x1036, 0xffff, 0, /* XXX really? */
313 "SIIG Cyber 2S1P PCI 16C850 (10x family)",
314 DEFAULT_RCLK,
315 PUC_PORT_2S1P, 0x18, 4, 0,
316 },
317
318 { 0x131f, 0x1050, 0xffff, 0,
319 "SIIG Cyber 4S PCI 16C550 (10x family)",
320 DEFAULT_RCLK,
321 PUC_PORT_4S, 0x18, 4, 0,
322 },
323
324 { 0x131f, 0x1051, 0xffff, 0,
325 "SIIG Cyber 4S PCI 16C650 (10x family)",
326 DEFAULT_RCLK,
327 PUC_PORT_4S, 0x18, 4, 0,
328 },
329
330 { 0x131f, 0x1052, 0xffff, 0,
331 "SIIG Cyber 4S PCI 16C850 (10x family)",
332 DEFAULT_RCLK,
333 PUC_PORT_4S, 0x18, 4, 0,
334 },
335
336 { 0x131f, 0x2010, 0xffff, 0,
337 "SIIG Cyber I/O PCI 16C550 (20x family)",
338 DEFAULT_RCLK,
339 PUC_PORT_1S1P, 0x10, 4, 0,
340 },
341
342 { 0x131f, 0x2011, 0xffff, 0,
343 "SIIG Cyber I/O PCI 16C650 (20x family)",
344 DEFAULT_RCLK,
345 PUC_PORT_1S1P, 0x10, 4, 0,
346 },
347
348 { 0x131f, 0x2012, 0xffff, 0,
349 "SIIG Cyber I/O PCI 16C850 (20x family)",
350 DEFAULT_RCLK,
351 PUC_PORT_1S1P, 0x10, 4, 0,
352 },
353
354 { 0x131f, 0x2021, 0xffff, 0,
355 "SIIG Cyber Parallel Dual PCI (20x family)",
356 0,
357 PUC_PORT_2P, 0x10, 8, 0,
358 },
359
360 { 0x131f, 0x2030, 0xffff, 0,
361 "SIIG Cyber Serial Dual PCI 16C550 (20x family)",
362 DEFAULT_RCLK,
363 PUC_PORT_2S, 0x10, 4, 0,
364 },
365
366 { 0x131f, 0x2031, 0xffff, 0,
367 "SIIG Cyber Serial Dual PCI 16C650 (20x family)",
368 DEFAULT_RCLK,
369 PUC_PORT_2S, 0x10, 4, 0,
370 },
371
372 { 0x131f, 0x2032, 0xffff, 0,
373 "SIIG Cyber Serial Dual PCI 16C850 (20x family)",
374 DEFAULT_RCLK,
375 PUC_PORT_2S, 0x10, 4, 0,
376 },
377
378 { 0x131f, 0x2040, 0xffff, 0,
379 "SIIG Cyber 2P1S PCI 16C550 (20x family)",
380 DEFAULT_RCLK,
381 PUC_PORT_1S2P, 0x10, -1, 0,
382 .config_function = puc_config_siig
383 },
384
385 { 0x131f, 0x2041, 0xffff, 0,
386 "SIIG Cyber 2P1S PCI 16C650 (20x family)",
387 DEFAULT_RCLK,
388 PUC_PORT_1S2P, 0x10, -1, 0,
389 .config_function = puc_config_siig
390 },
391
392 { 0x131f, 0x2042, 0xffff, 0,
393 "SIIG Cyber 2P1S PCI 16C850 (20x family)",
394 DEFAULT_RCLK,
395 PUC_PORT_1S2P, 0x10, -1, 0,
396 .config_function = puc_config_siig
397 },
398
399 { 0x131f, 0x2050, 0xffff, 0,
400 "SIIG Cyber 4S PCI 16C550 (20x family)",
401 DEFAULT_RCLK,
402 PUC_PORT_4S, 0x10, 4, 0,
403 },
404
405 { 0x131f, 0x2051, 0xffff, 0,
406 "SIIG Cyber 4S PCI 16C650 (20x family)",
407 DEFAULT_RCLK,
408 PUC_PORT_4S, 0x10, 4, 0,
409 },
410
411 { 0x131f, 0x2052, 0xffff, 0,
412 "SIIG Cyber 4S PCI 16C850 (20x family)",
413 DEFAULT_RCLK,
414 PUC_PORT_4S, 0x10, 4, 0,
415 },
416
417 { 0x131f, 0x2060, 0xffff, 0,
418 "SIIG Cyber 2S1P PCI 16C550 (20x family)",
419 DEFAULT_RCLK,
420 PUC_PORT_2S1P, 0x10, 4, 0,
421 },
422
423 { 0x131f, 0x2061, 0xffff, 0,
424 "SIIG Cyber 2S1P PCI 16C650 (20x family)",
425 DEFAULT_RCLK,
426 PUC_PORT_2S1P, 0x10, 4, 0,
427 },
428
429 { 0x131f, 0x2062, 0xffff, 0,
430 "SIIG Cyber 2S1P PCI 16C850 (20x family)",
431 DEFAULT_RCLK,
432 PUC_PORT_2S1P, 0x10, 4, 0,
433 },
434
435 { 0x131f, 0x2081, 0xffff, 0,
436 "SIIG PS8000 8S PCI 16C650 (20x family)",
437 DEFAULT_RCLK,
438 PUC_PORT_8S, 0x10, -1, -1,
439 .config_function = puc_config_siig
440 },
441
442 { 0x135c, 0x0010, 0xffff, 0,
443 "Quatech QSC-100",
444 -3, /* max 8x clock rate */
445 PUC_PORT_4S, 0x14, 0, 8,
446 .config_function = puc_config_quatech
447 },
448
449 { 0x135c, 0x0020, 0xffff, 0,
450 "Quatech DSC-100",
451 -1, /* max 2x clock rate */
452 PUC_PORT_2S, 0x14, 0, 8,
453 .config_function = puc_config_quatech
454 },
455
456 { 0x135c, 0x0030, 0xffff, 0,
457 "Quatech DSC-200/300",
458 -1, /* max 2x clock rate */
459 PUC_PORT_2S, 0x14, 0, 8,
460 .config_function = puc_config_quatech
461 },
462
463 { 0x135c, 0x0040, 0xffff, 0,
464 "Quatech QSC-200/300",
465 -3, /* max 8x clock rate */
466 PUC_PORT_4S, 0x14, 0, 8,
467 .config_function = puc_config_quatech
468 },
469
470 { 0x135c, 0x0050, 0xffff, 0,
471 "Quatech ESC-100D",
472 -3, /* max 8x clock rate */
473 PUC_PORT_8S, 0x14, 0, 8,
474 .config_function = puc_config_quatech
475 },
476
477 { 0x135c, 0x0060, 0xffff, 0,
478 "Quatech ESC-100M",
479 -3, /* max 8x clock rate */
480 PUC_PORT_8S, 0x14, 0, 8,
481 .config_function = puc_config_quatech
482 },
483
484 { 0x135c, 0x0170, 0xffff, 0,
485 "Quatech QSCLP-100",
486 -1, /* max 2x clock rate */
487 PUC_PORT_4S, 0x18, 0, 8,
488 .config_function = puc_config_quatech
489 },
490
491 { 0x135c, 0x0180, 0xffff, 0,
492 "Quatech DSCLP-100",
493 -1, /* max 3x clock rate */
494 PUC_PORT_2S, 0x18, 0, 8,
495 .config_function = puc_config_quatech
496 },
497
498 { 0x135c, 0x01b0, 0xffff, 0,
499 "Quatech DSCLP-200/300",
500 -1, /* max 2x clock rate */
501 PUC_PORT_2S, 0x18, 0, 8,
502 .config_function = puc_config_quatech
503 },
504
505 { 0x135c, 0x01e0, 0xffff, 0,
506 "Quatech ESCLP-100",
507 -3, /* max 8x clock rate */
508 PUC_PORT_8S, 0x10, 0, 8,
509 .config_function = puc_config_quatech
510 },
511
512 { 0x1393, 0x1024, 0xffff, 0,
513 "Moxa Technologies, Smartio CP-102E/PCIe",
514 DEFAULT_RCLK * 8,
515 PUC_PORT_2S, 0x14, 0, -1,
516 .config_function = puc_config_moxa
517 },
518
519 { 0x1393, 0x1025, 0xffff, 0,
520 "Moxa Technologies, Smartio CP-102EL/PCIe",
521 DEFAULT_RCLK * 8,
522 PUC_PORT_2S, 0x14, 0, -1,
523 .config_function = puc_config_moxa
524 },
525
526 { 0x1393, 0x1040, 0xffff, 0,
527 "Moxa Technologies, Smartio C104H/PCI",
528 DEFAULT_RCLK * 8,
529 PUC_PORT_4S, 0x18, 0, 8,
530 },
531
532 { 0x1393, 0x1041, 0xffff, 0,
533 "Moxa Technologies, Smartio CP-104UL/PCI",
534 DEFAULT_RCLK * 8,
535 PUC_PORT_4S, 0x18, 0, 8,
536 },
537
538 { 0x1393, 0x1042, 0xffff, 0,
539 "Moxa Technologies, Smartio CP-104JU/PCI",
540 DEFAULT_RCLK * 8,
541 PUC_PORT_4S, 0x18, 0, 8,
542 },
543
544 { 0x1393, 0x1043, 0xffff, 0,
545 "Moxa Technologies, Smartio CP-104EL/PCIe",
546 DEFAULT_RCLK * 8,
547 PUC_PORT_4S, 0x18, 0, 8,
548 },
549
550 { 0x1393, 0x1045, 0xffff, 0,
551 "Moxa Technologies, Smartio CP-104EL-A/PCIe",
552 DEFAULT_RCLK * 8,
553 PUC_PORT_4S, 0x14, 0, -1,
554 .config_function = puc_config_moxa
555 },
556
557 { 0x1393, 0x1120, 0xffff, 0,
558 "Moxa Technologies, CP-112UL",
559 DEFAULT_RCLK * 8,
560 PUC_PORT_2S, 0x18, 0, 8,
561 },
562
563 { 0x1393, 0x1141, 0xffff, 0,
564 "Moxa Technologies, Industio CP-114",
565 DEFAULT_RCLK * 8,
566 PUC_PORT_4S, 0x18, 0, 8,
567 },
568
569 { 0x1393, 0x1144, 0xffff, 0,
570 "Moxa Technologies, Smartio CP-114EL/PCIe",
571 DEFAULT_RCLK * 8,
572 PUC_PORT_4S, 0x14, 0, -1,
573 .config_function = puc_config_moxa
574 },
575
576 { 0x1393, 0x1182, 0xffff, 0,
577 "Moxa Technologies, Smartio CP-118EL-A/PCIe",
578 DEFAULT_RCLK * 8,
579 PUC_PORT_8S, 0x14, 0, -1,
580 .config_function = puc_config_moxa
581 },
582
583 { 0x1393, 0x1680, 0xffff, 0,
584 "Moxa Technologies, C168H/PCI",
585 DEFAULT_RCLK * 8,
586 PUC_PORT_8S, 0x18, 0, 8,
587 },
588
589 { 0x1393, 0x1681, 0xffff, 0,
590 "Moxa Technologies, C168U/PCI",
591 DEFAULT_RCLK * 8,
592 PUC_PORT_8S, 0x18, 0, 8,
593 },
594
595 { 0x1393, 0x1682, 0xffff, 0,
596 "Moxa Technologies, CP-168EL/PCIe",
597 DEFAULT_RCLK * 8,
598 PUC_PORT_8S, 0x18, 0, 8,
599 },
600
601 { 0x1393, 0x1683, 0xffff, 0,
602 "Moxa Technologies, Smartio CP-168EL-A/PCIe",
603 DEFAULT_RCLK * 8,
604 PUC_PORT_8S, 0x14, 0, -1,
605 .config_function = puc_config_moxa
606 },
607
608 { 0x13a8, 0x0152, 0xffff, 0,
609 "Exar XR17C/D152",
610 DEFAULT_RCLK * 8,
611 PUC_PORT_2S, 0x10, 0, -1,
612 .config_function = puc_config_exar
613 },
614
615 { 0x13a8, 0x0154, 0xffff, 0,
616 "Exar XR17C154",
617 DEFAULT_RCLK * 8,
618 PUC_PORT_4S, 0x10, 0, -1,
619 .config_function = puc_config_exar
620 },
621
622 { 0x13a8, 0x0158, 0xffff, 0,
623 "Exar XR17C158",
624 DEFAULT_RCLK * 8,
625 PUC_PORT_8S, 0x10, 0, -1,
626 .config_function = puc_config_exar
627 },
628
629 { 0x13a8, 0x0258, 0xffff, 0,
630 "Exar XR17V258IV",
631 DEFAULT_RCLK * 8,
632 PUC_PORT_8S, 0x10, 0, -1,
633 .config_function = puc_config_exar
634 },
635
636 /* The XR17V358 uses the 125MHz PCIe clock as its reference clock. */
637 { 0x13a8, 0x0358, 0xffff, 0,
638 "Exar XR17V358",
639 125000000,
640 PUC_PORT_8S, 0x10, 0, -1,
641 .config_function = puc_config_exar_pcie
642 },
643
644 { 0x13fe, 0x1600, 0x1602, 0x0002,
645 "Advantech PCI-1602",
646 DEFAULT_RCLK * 8,
647 PUC_PORT_2S, 0x10, 0, 8,
648 },
649
650 { 0x1407, 0x0100, 0xffff, 0,
651 "Lava Computers Dual Serial",
652 DEFAULT_RCLK,
653 PUC_PORT_2S, 0x10, 4, 0,
654 },
655
656 { 0x1407, 0x0101, 0xffff, 0,
657 "Lava Computers Quatro A",
658 DEFAULT_RCLK,
659 PUC_PORT_2S, 0x10, 4, 0,
660 },
661
662 { 0x1407, 0x0102, 0xffff, 0,
663 "Lava Computers Quatro B",
664 DEFAULT_RCLK,
665 PUC_PORT_2S, 0x10, 4, 0,
666 },
667
668 { 0x1407, 0x0120, 0xffff, 0,
669 "Lava Computers Quattro-PCI A",
670 DEFAULT_RCLK,
671 PUC_PORT_2S, 0x10, 4, 0,
672 },
673
674 { 0x1407, 0x0121, 0xffff, 0,
675 "Lava Computers Quattro-PCI B",
676 DEFAULT_RCLK,
677 PUC_PORT_2S, 0x10, 4, 0,
678 },
679
680 { 0x1407, 0x0180, 0xffff, 0,
681 "Lava Computers Octo A",
682 DEFAULT_RCLK,
683 PUC_PORT_4S, 0x10, 4, 0,
684 },
685
686 { 0x1407, 0x0181, 0xffff, 0,
687 "Lava Computers Octo B",
688 DEFAULT_RCLK,
689 PUC_PORT_4S, 0x10, 4, 0,
690 },
691
692 { 0x1409, 0x7268, 0xffff, 0,
693 "Sunix SUN1888",
694 0,
695 PUC_PORT_2P, 0x10, 0, 8,
696 },
697
698 { 0x1409, 0x7168, 0xffff, 0,
699 NULL,
700 DEFAULT_RCLK * 8,
701 PUC_PORT_NONSTANDARD, 0x10, -1, -1,
702 .config_function = puc_config_timedia
703 },
704
705 /*
706 * Boards with an Oxford Semiconductor chip.
707 *
708 * Oxford Semiconductor provides documentation for their chip at:
709 * <URL:http://www.plxtech.com/products/uart/>
710 *
711 * As sold by Kouwell <URL:http://www.kouwell.com/>.
712 * I/O Flex PCI I/O Card Model-223 with 4 serial and 1 parallel ports.
713 */
714 {
715 0x1415, 0x9501, 0x10fc, 0xc070,
716 "I-O DATA RSA-PCI2/R",
717 DEFAULT_RCLK * 8,
718 PUC_PORT_2S, 0x10, 0, 8,
719 },
720
721 { 0x1415, 0x9501, 0x131f, 0x2050,
722 "SIIG Cyber 4 PCI 16550",
723 DEFAULT_RCLK * 10,
724 PUC_PORT_4S, 0x10, 0, 8,
725 },
726
727 { 0x1415, 0x9501, 0x131f, 0x2051,
728 "SIIG Cyber 4S PCI 16C650 (20x family)",
729 DEFAULT_RCLK * 10,
730 PUC_PORT_4S, 0x10, 0, 8,
731 },
732
733 { 0x1415, 0x9501, 0x131f, 0x2052,
734 "SIIG Quartet Serial 850",
735 DEFAULT_RCLK * 10,
736 PUC_PORT_4S, 0x10, 0, 8,
737 },
738
739 { 0x1415, 0x9501, 0x14db, 0x2150,
740 "Kuroutoshikou SERIAL4P-LPPCI2",
741 DEFAULT_RCLK * 10,
742 PUC_PORT_4S, 0x10, 0, 8,
743 },
744
745 { 0x1415, 0x9501, 0xffff, 0,
746 "Oxford Semiconductor OX16PCI954 UARTs",
747 0,
748 PUC_PORT_4S, 0x10, 0, 8,
749 .config_function = puc_config_oxford_pci954
750 },
751
752 { 0x1415, 0x950a, 0x131f, 0x2030,
753 "SIIG Cyber 2S PCIe",
754 DEFAULT_RCLK * 10,
755 PUC_PORT_2S, 0x10, 0, 8,
756 },
757
758 { 0x1415, 0x950a, 0x131f, 0x2032,
759 "SIIG Cyber Serial Dual PCI 16C850",
760 DEFAULT_RCLK * 10,
761 PUC_PORT_4S, 0x10, 0, 8,
762 },
763
764 { 0x1415, 0x950a, 0xffff, 0,
765 "Oxford Semiconductor OX16PCI954 UARTs",
766 DEFAULT_RCLK,
767 PUC_PORT_4S, 0x10, 0, 8,
768 },
769
770 { 0x1415, 0x9511, 0xffff, 0,
771 "Oxford Semiconductor OX9160/OX16PCI954 UARTs (function 1)",
772 DEFAULT_RCLK,
773 PUC_PORT_4S, 0x10, 0, 8,
774 },
775
776 { 0x1415, 0x9521, 0xffff, 0,
777 "Oxford Semiconductor OX16PCI952 UARTs",
778 DEFAULT_RCLK,
779 PUC_PORT_2S, 0x10, 4, 0,
780 },
781
782 { 0x1415, 0x9538, 0xffff, 0,
783 "Oxford Semiconductor OX16PCI958 UARTs",
784 DEFAULT_RCLK,
785 PUC_PORT_8S, 0x18, 0, 8,
786 },
787
788 /*
789 * Perle boards use Oxford Semiconductor chips, but they store the
790 * Oxford Semiconductor device ID as a subvendor device ID and use
791 * their own device IDs.
792 */
793
794 { 0x155f, 0x0331, 0xffff, 0,
795 "Perle Ultraport4 Express",
796 DEFAULT_RCLK * 8,
797 PUC_PORT_4S, 0x10, 0, 8,
798 },
799
800 { 0x155f, 0xB012, 0xffff, 0,
801 "Perle Speed2 LE",
802 DEFAULT_RCLK * 8,
803 PUC_PORT_2S, 0x10, 0, 8,
804 },
805
806 { 0x155f, 0xB022, 0xffff, 0,
807 "Perle Speed2 LE",
808 DEFAULT_RCLK * 8,
809 PUC_PORT_2S, 0x10, 0, 8,
810 },
811
812 { 0x155f, 0xB004, 0xffff, 0,
813 "Perle Speed4 LE",
814 DEFAULT_RCLK * 8,
815 PUC_PORT_4S, 0x10, 0, 8,
816 },
817
818 { 0x155f, 0xB008, 0xffff, 0,
819 "Perle Speed8 LE",
820 DEFAULT_RCLK * 8,
821 PUC_PORT_8S, 0x10, 0, 8,
822 },
823
824
825 /*
826 * Oxford Semiconductor PCI Express Expresso family
827 *
828 * Found in many 'native' PCI Express serial boards such as:
829 *
830 * eMegatech MP954ER4 (4 port) and MP958ER8 (8 port)
831 * <URL:http://www.emegatech.com.tw/pdrs232pcie.html>
832 *
833 * Lindy 51189 (4 port)
834 * <URL:http://www.lindy.com> <URL:http://tinyurl.com/lindy-51189>
835 *
836 * StarTech.com PEX4S952 (4 port) and PEX8S952 (8 port)
837 * <URL:http://www.startech.com>
838 */
839
840 { 0x1415, 0xc138, 0xffff, 0,
841 "Oxford Semiconductor OXPCIe952 UARTs",
842 DEFAULT_RCLK * 0x22,
843 PUC_PORT_NONSTANDARD, 0x10, 0, -1,
844 .config_function = puc_config_oxford_pcie
845 },
846
847 { 0x1415, 0xc158, 0xffff, 0,
848 "Oxford Semiconductor OXPCIe952 UARTs",
849 DEFAULT_RCLK * 0x22,
850 PUC_PORT_NONSTANDARD, 0x10, 0, -1,
851 .config_function = puc_config_oxford_pcie
852 },
853
854 { 0x1415, 0xc15d, 0xffff, 0,
855 "Oxford Semiconductor OXPCIe952 UARTs (function 1)",
856 DEFAULT_RCLK * 0x22,
857 PUC_PORT_NONSTANDARD, 0x10, 0, -1,
858 .config_function = puc_config_oxford_pcie
859 },
860
861 { 0x1415, 0xc208, 0xffff, 0,
862 "Oxford Semiconductor OXPCIe954 UARTs",
863 DEFAULT_RCLK * 0x22,
864 PUC_PORT_NONSTANDARD, 0x10, 0, -1,
865 .config_function = puc_config_oxford_pcie
866 },
867
868 { 0x1415, 0xc20d, 0xffff, 0,
869 "Oxford Semiconductor OXPCIe954 UARTs (function 1)",
870 DEFAULT_RCLK * 0x22,
871 PUC_PORT_NONSTANDARD, 0x10, 0, -1,
872 .config_function = puc_config_oxford_pcie
873 },
874
875 { 0x1415, 0xc308, 0xffff, 0,
876 "Oxford Semiconductor OXPCIe958 UARTs",
877 DEFAULT_RCLK * 0x22,
878 PUC_PORT_NONSTANDARD, 0x10, 0, -1,
879 .config_function = puc_config_oxford_pcie
880 },
881
882 { 0x1415, 0xc30d, 0xffff, 0,
883 "Oxford Semiconductor OXPCIe958 UARTs (function 1)",
884 DEFAULT_RCLK * 0x22,
885 PUC_PORT_NONSTANDARD, 0x10, 0, -1,
886 .config_function = puc_config_oxford_pcie
887 },
888
889 { 0x14d2, 0x8010, 0xffff, 0,
890 "VScom PCI-100L",
891 DEFAULT_RCLK * 8,
892 PUC_PORT_1S, 0x14, 0, 0,
893 },
894
895 { 0x14d2, 0x8020, 0xffff, 0,
896 "VScom PCI-200L",
897 DEFAULT_RCLK * 8,
898 PUC_PORT_2S, 0x14, 4, 0,
899 },
900
901 { 0x14d2, 0x8028, 0xffff, 0,
902 "VScom 200Li",
903 DEFAULT_RCLK,
904 PUC_PORT_2S, 0x20, 0, 8,
905 },
906
907 /*
908 * VScom (Titan?) PCI-800L. More modern variant of the
909 * PCI-800. Uses 6 discrete 16550 UARTs, plus another
910 * two of them obviously implemented as macro cells in
911 * the ASIC. This causes the weird port access pattern
912 * below, where two of the IO port ranges each access
913 * one of the ASIC UARTs, and a block of IO addresses
914 * access the external UARTs.
915 */
916 { 0x14d2, 0x8080, 0xffff, 0,
917 "Titan VScom PCI-800L",
918 DEFAULT_RCLK * 8,
919 PUC_PORT_8S, 0x14, -1, -1,
920 .config_function = puc_config_titan
921 },
922
923 /*
924 * VScom PCI-800H. Uses 8 16950 UART, behind a PCI chips that offers
925 * 4 com port on PCI device 0 and 4 on PCI device 1. PCI device 0 has
926 * device ID 3 and PCI device 1 device ID 4.
927 */
928 { 0x14d2, 0xa003, 0xffff, 0,
929 "Titan PCI-800H",
930 DEFAULT_RCLK * 8,
931 PUC_PORT_4S, 0x10, 0, 8,
932 },
933
934 { 0x14d2, 0xa004, 0xffff, 0,
935 "Titan PCI-800H",
936 DEFAULT_RCLK * 8,
937 PUC_PORT_4S, 0x10, 0, 8,
938 },
939
940 { 0x14d2, 0xa005, 0xffff, 0,
941 "Titan PCI-200H",
942 DEFAULT_RCLK * 8,
943 PUC_PORT_2S, 0x10, 0, 8,
944 },
945
946 { 0x14d2, 0xe020, 0xffff, 0,
947 "Titan VScom PCI-200HV2",
948 DEFAULT_RCLK * 8,
949 PUC_PORT_2S, 0x10, 4, 0,
950 },
951
952 { 0x14d2, 0xa007, 0xffff, 0,
953 "Titan VScom PCIex-800H",
954 DEFAULT_RCLK * 8,
955 PUC_PORT_4S, 0x10, 0, 8,
956 },
957
958 { 0x14d2, 0xa008, 0xffff, 0,
959 "Titan VScom PCIex-800H",
960 DEFAULT_RCLK * 8,
961 PUC_PORT_4S, 0x10, 0, 8,
962 },
963
964 { 0x14db, 0x2130, 0xffff, 0,
965 "Avlab Technology, PCI IO 2S",
966 DEFAULT_RCLK,
967 PUC_PORT_2S, 0x10, 4, 0,
968 },
969
970 { 0x14db, 0x2150, 0xffff, 0,
971 "Avlab Low Profile PCI 4 Serial",
972 DEFAULT_RCLK,
973 PUC_PORT_4S, 0x10, 4, 0,
974 },
975
976 { 0x14db, 0x2152, 0xffff, 0,
977 "Avlab Low Profile PCI 4 Serial",
978 DEFAULT_RCLK,
979 PUC_PORT_4S, 0x10, 4, 0,
980 },
981
982 { 0x1592, 0x0781, 0xffff, 0,
983 "Syba Tech Ltd. PCI-4S2P-550-ECP",
984 DEFAULT_RCLK,
985 PUC_PORT_4S1P, 0x10, 0, -1,
986 .config_function = puc_config_syba
987 },
988
989 { 0x1fd4, 0x1999, 0xffff, 0,
990 "Sunix SER5437A",
991 DEFAULT_RCLK * 8,
992 PUC_PORT_2S, 0x10, 0, 8,
993 },
994
995 { 0x5372, 0x6873, 0xffff, 0,
996 "Sun 1040 PCI Quad Serial",
997 DEFAULT_RCLK,
998 PUC_PORT_4S, 0x10, 4, 0,
999 },
1000
1001 { 0x6666, 0x0001, 0xffff, 0,
1002 "Decision Computer Inc, PCCOM 4-port serial",
1003 DEFAULT_RCLK,
1004 PUC_PORT_4S, 0x1c, 0, 8,
1005 },
1006
1007 { 0x6666, 0x0002, 0xffff, 0,
1008 "Decision Computer Inc, PCCOM 8-port serial",
1009 DEFAULT_RCLK,
1010 PUC_PORT_8S, 0x1c, 0, 8,
1011 },
1012
1013 { 0x6666, 0x0004, 0xffff, 0,
1014 "PCCOM dual port RS232/422/485",
1015 DEFAULT_RCLK,
1016 PUC_PORT_2S, 0x1c, 0, 8,
1017 },
1018
1019 { 0x9710, 0x9815, 0xffff, 0,
1020 "NetMos NM9815 Dual 1284 Printer port",
1021 0,
1022 PUC_PORT_2P, 0x10, 8, 0,
1023 },
1024
1025 /*
1026 * This is more specific than the generic NM9835 entry that follows, and
1027 * is placed here to _prevent_ puc from claiming this single port card.
1028 *
1029 * uart(4) will claim this device.
1030 */
1031 { 0x9710, 0x9835, 0x1000, 1,
1032 "NetMos NM9835 based 1-port serial",
1033 DEFAULT_RCLK,
1034 PUC_PORT_1S, 0x10, 4, 0,
1035 },
1036
1037 { 0x9710, 0x9835, 0x1000, 2,
1038 "NetMos NM9835 based 2-port serial",
1039 DEFAULT_RCLK,
1040 PUC_PORT_2S, 0x10, 4, 0,
1041 },
1042
1043 { 0x9710, 0x9835, 0xffff, 0,
1044 "NetMos NM9835 Dual UART and 1284 Printer port",
1045 DEFAULT_RCLK,
1046 PUC_PORT_2S1P, 0x10, 4, 0,
1047 },
1048
1049 { 0x9710, 0x9845, 0x1000, 0x0006,
1050 "NetMos NM9845 6 Port UART",
1051 DEFAULT_RCLK,
1052 PUC_PORT_6S, 0x10, 4, 0,
1053 },
1054
1055 { 0x9710, 0x9845, 0xffff, 0,
1056 "NetMos NM9845 Quad UART and 1284 Printer port",
1057 DEFAULT_RCLK,
1058 PUC_PORT_4S1P, 0x10, 4, 0,
1059 },
1060
1061 { 0x9710, 0x9865, 0xa000, 0x3002,
1062 "NetMos NM9865 Dual UART",
1063 DEFAULT_RCLK,
1064 PUC_PORT_2S, 0x10, 4, 0,
1065 },
1066
1067 { 0x9710, 0x9865, 0xa000, 0x3003,
1068 "NetMos NM9865 Triple UART",
1069 DEFAULT_RCLK,
1070 PUC_PORT_3S, 0x10, 4, 0,
1071 },
1072
1073 { 0x9710, 0x9865, 0xa000, 0x3004,
1074 "NetMos NM9865 Quad UART",
1075 DEFAULT_RCLK,
1076 PUC_PORT_4S, 0x10, 4, 0,
1077 },
1078
1079 { 0x9710, 0x9865, 0xa000, 0x3011,
1080 "NetMos NM9865 Single UART and 1284 Printer port",
1081 DEFAULT_RCLK,
1082 PUC_PORT_1S1P, 0x10, 4, 0,
1083 },
1084
1085 { 0x9710, 0x9865, 0xa000, 0x3012,
1086 "NetMos NM9865 Dual UART and 1284 Printer port",
1087 DEFAULT_RCLK,
1088 PUC_PORT_2S1P, 0x10, 4, 0,
1089 },
1090
1091 { 0x9710, 0x9865, 0xa000, 0x3020,
1092 "NetMos NM9865 Dual 1284 Printer port",
1093 DEFAULT_RCLK,
1094 PUC_PORT_2P, 0x10, 4, 0,
1095 },
1096
1097 { 0xb00c, 0x021c, 0xffff, 0,
1098 "IC Book Labs Gunboat x4 Lite",
1099 DEFAULT_RCLK,
1100 PUC_PORT_4S, 0x10, 0, 8,
1101 .config_function = puc_config_icbook
1102 },
1103
1104 { 0xb00c, 0x031c, 0xffff, 0,
1105 "IC Book Labs Gunboat x4 Pro",
1106 DEFAULT_RCLK,
1107 PUC_PORT_4S, 0x10, 0, 8,
1108 .config_function = puc_config_icbook
1109 },
1110
1111 { 0xb00c, 0x041c, 0xffff, 0,
1112 "IC Book Labs Ironclad x8 Lite",
1113 DEFAULT_RCLK,
1114 PUC_PORT_8S, 0x10, 0, 8,
1115 .config_function = puc_config_icbook
1116 },
1117
1118 { 0xb00c, 0x051c, 0xffff, 0,
1119 "IC Book Labs Ironclad x8 Pro",
1120 DEFAULT_RCLK,
1121 PUC_PORT_8S, 0x10, 0, 8,
1122 .config_function = puc_config_icbook
1123 },
1124
1125 { 0xb00c, 0x081c, 0xffff, 0,
1126 "IC Book Labs Dreadnought x16 Pro",
1127 DEFAULT_RCLK * 8,
1128 PUC_PORT_16S, 0x10, 0, 8,
1129 .config_function = puc_config_icbook
1130 },
1131
1132 { 0xb00c, 0x091c, 0xffff, 0,
1133 "IC Book Labs Dreadnought x16 Lite",
1134 DEFAULT_RCLK,
1135 PUC_PORT_16S, 0x10, 0, 8,
1136 .config_function = puc_config_icbook
1137 },
1138
1139 { 0xb00c, 0x0a1c, 0xffff, 0,
1140 "IC Book Labs Gunboat x2 Low Profile",
1141 DEFAULT_RCLK,
1142 PUC_PORT_2S, 0x10, 0, 8,
1143 },
1144
1145 { 0xb00c, 0x0b1c, 0xffff, 0,
1146 "IC Book Labs Gunboat x4 Low Profile",
1147 DEFAULT_RCLK,
1148 PUC_PORT_4S, 0x10, 0, 8,
1149 .config_function = puc_config_icbook
1150 },
1151
1152 { 0xffff, 0, 0xffff, 0, NULL, 0 }
1153};
1154
1155static int
1156puc_config_amc(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port,
1157 intptr_t *res)
1158{
1159 switch (cmd) {
1160 case PUC_CFG_GET_OFS:
1161 *res = 8 * (port & 1);
1162 return (0);
1163 case PUC_CFG_GET_RID:
1164 *res = 0x14 + (port >> 1) * 4;
1165 return (0);
1166 default:
1167 break;
1168 }
1169 return (ENXIO);
1170}
1171
1172static int
1173puc_config_diva(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port,
1174 intptr_t *res)
1175{
1176 const struct puc_cfg *cfg = sc->sc_cfg;
1177
1178 if (cmd == PUC_CFG_GET_OFS) {
1179 if (cfg->subdevice == 0x1282) /* Everest SP */
1180 port <<= 1;
1181 else if (cfg->subdevice == 0x104b) /* Maestro SP2 */
1182 port = (port == 3) ? 4 : port;
1183 *res = port * 8 + ((port > 2) ? 0x18 : 0);
1184 return (0);
1185 }
1186 return (ENXIO);
1187}
1188
1189static int
1190puc_config_exar(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port,
1191 intptr_t *res)
1192{
1193 if (cmd == PUC_CFG_GET_OFS) {
1194 *res = port * 0x200;
1195 return (0);
1196 }
1197 return (ENXIO);
1198}
1199
1200static int
1201puc_config_exar_pcie(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port,
1202 intptr_t *res)
1203{
1204 if (cmd == PUC_CFG_GET_OFS) {
1205 *res = port * 0x400;
1206 return (0);
1207 }
1208 return (ENXIO);
1209}
1210
1211static int
1212puc_config_icbook(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port,
1213 intptr_t *res)
1214{
1215 if (cmd == PUC_CFG_GET_ILR) {
1216 *res = PUC_ILR_DIGI;
1217 return (0);
1218 }
1219 return (ENXIO);
1220}
1221
1222static int
1223puc_config_moxa(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port,
1224 intptr_t *res)
1225{
1226 if (cmd == PUC_CFG_GET_OFS) {
1227 const struct puc_cfg *cfg = sc->sc_cfg;
1228
1229 if (port == 3 && (cfg->device == 0x1045 || cfg->device == 0x1144))
1230 port = 7;
1231 *res = port * 0x200;
1232
1233 return 0;
1234 }
1235 return (ENXIO);
1236}
1237
1238static int
1239puc_config_quatech(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port,
1240 intptr_t *res)
1241{
1242 const struct puc_cfg *cfg = sc->sc_cfg;
1243 struct puc_bar *bar;
1244 uint8_t v0, v1;
1245
1246 switch (cmd) {
1247 case PUC_CFG_SETUP:
1248 /*
1249 * Check if the scratchpad register is enabled or if the
1250 * interrupt status and options registers are active.
1251 */
1252 bar = puc_get_bar(sc, cfg->rid);
1253 if (bar == NULL)
1254 return (ENXIO);
1255 /* Set DLAB in the LCR register of UART 0. */
1256 bus_write_1(bar->b_res, 3, 0x80);
1257 /* Write 0 to the SPR register of UART 0. */
1258 bus_write_1(bar->b_res, 7, 0);
1259 /* Read back the contents of the SPR register of UART 0. */
1260 v0 = bus_read_1(bar->b_res, 7);
1261 /* Write a specific value to the SPR register of UART 0. */
1262 bus_write_1(bar->b_res, 7, 0x80 + -cfg->clock);
1263 /* Read back the contents of the SPR register of UART 0. */
1264 v1 = bus_read_1(bar->b_res, 7);
1265 /* Clear DLAB in the LCR register of UART 0. */
1266 bus_write_1(bar->b_res, 3, 0);
1267 /* Save the two values read-back from the SPR register. */
1268 sc->sc_cfg_data = (v0 << 8) | v1;
1269 if (v0 == 0 && v1 == 0x80 + -cfg->clock) {
1270 /*
1271 * The SPR register echoed the two values written
1272 * by us. This means that the SPAD jumper is set.
1273 */
1274 device_printf(sc->sc_dev, "warning: extra features "
1275 "not usable -- SPAD compatibility enabled\n");
1276 return (0);
1277 }
1278 if (v0 != 0) {
1279 /*
1280 * The first value doesn't match. This can only mean
1281 * that the SPAD jumper is not set and that a non-
1282 * standard fixed clock multiplier jumper is set.
1283 */
1284 if (bootverbose)
1285 device_printf(sc->sc_dev, "fixed clock rate "
1286 "multiplier of %d\n", 1 << v0);
1287 if (v0 < -cfg->clock)
1288 device_printf(sc->sc_dev, "warning: "
1289 "suboptimal fixed clock rate multiplier "
1290 "setting\n");
1291 return (0);
1292 }
1293 /*
1294 * The first value matched, but the second didn't. We know
1295 * that the SPAD jumper is not set. We also know that the
1296 * clock rate multiplier is software controlled *and* that
1297 * we just programmed it to the maximum allowed.
1298 */
1299 if (bootverbose)
1300 device_printf(sc->sc_dev, "clock rate multiplier of "
1301 "%d selected\n", 1 << -cfg->clock);
1302 return (0);
1303 case PUC_CFG_GET_CLOCK:
1304 v0 = (sc->sc_cfg_data >> 8) & 0xff;
1305 v1 = sc->sc_cfg_data & 0xff;
1306 if (v0 == 0 && v1 == 0x80 + -cfg->clock) {
1307 /*
1308 * XXX With the SPAD jumper applied, there's no
1309 * easy way of knowing if there's also a clock
1310 * rate multiplier jumper installed. Let's hope
1311 * not...
1312 */
1313 *res = DEFAULT_RCLK;
1314 } else if (v0 == 0) {
1315 /*
1316 * No clock rate multiplier jumper installed,
1317 * so we programmed the board with the maximum
1318 * multiplier allowed as given to us in the
1319 * clock field of the config record (negated).
1320 */
1321 *res = DEFAULT_RCLK << -cfg->clock;
1322 } else
1323 *res = DEFAULT_RCLK << v0;
1324 return (0);
1325 case PUC_CFG_GET_ILR:
1326 v0 = (sc->sc_cfg_data >> 8) & 0xff;
1327 v1 = sc->sc_cfg_data & 0xff;
1328 *res = (v0 == 0 && v1 == 0x80 + -cfg->clock)
1329 ? PUC_ILR_NONE : PUC_ILR_QUATECH;
1330 return (0);
1331 default:
1332 break;
1333 }
1334 return (ENXIO);
1335}
1336
1337static int
1338puc_config_syba(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port,
1339 intptr_t *res)
1340{
1341 static int base[] = { 0x251, 0x3f0, 0 };
1342 const struct puc_cfg *cfg = sc->sc_cfg;
1343 struct puc_bar *bar;
1344 int efir, idx, ofs;
1345 uint8_t v;
1346
1347 switch (cmd) {
1348 case PUC_CFG_SETUP:
1349 bar = puc_get_bar(sc, cfg->rid);
1350 if (bar == NULL)
1351 return (ENXIO);
1352
1353 /* configure both W83877TFs */
1354 bus_write_1(bar->b_res, 0x250, 0x89);
1355 bus_write_1(bar->b_res, 0x3f0, 0x87);
1356 bus_write_1(bar->b_res, 0x3f0, 0x87);
1357 idx = 0;
1358 while (base[idx] != 0) {
1359 efir = base[idx];
1360 bus_write_1(bar->b_res, efir, 0x09);
1361 v = bus_read_1(bar->b_res, efir + 1);
1362 if ((v & 0x0f) != 0x0c)
1363 return (ENXIO);
1364 bus_write_1(bar->b_res, efir, 0x16);
1365 v = bus_read_1(bar->b_res, efir + 1);
1366 bus_write_1(bar->b_res, efir, 0x16);
1367 bus_write_1(bar->b_res, efir + 1, v | 0x04);
1368 bus_write_1(bar->b_res, efir, 0x16);
1369 bus_write_1(bar->b_res, efir + 1, v & ~0x04);
1370 ofs = base[idx] & 0x300;
1371 bus_write_1(bar->b_res, efir, 0x23);
1372 bus_write_1(bar->b_res, efir + 1, (ofs + 0x78) >> 2);
1373 bus_write_1(bar->b_res, efir, 0x24);
1374 bus_write_1(bar->b_res, efir + 1, (ofs + 0xf8) >> 2);
1375 bus_write_1(bar->b_res, efir, 0x25);
1376 bus_write_1(bar->b_res, efir + 1, (ofs + 0xe8) >> 2);
1377 bus_write_1(bar->b_res, efir, 0x17);
1378 bus_write_1(bar->b_res, efir + 1, 0x03);
1379 bus_write_1(bar->b_res, efir, 0x28);
1380 bus_write_1(bar->b_res, efir + 1, 0x43);
1381 idx++;
1382 }
1383 bus_write_1(bar->b_res, 0x250, 0xaa);
1384 bus_write_1(bar->b_res, 0x3f0, 0xaa);
1385 return (0);
1386 case PUC_CFG_GET_OFS:
1387 switch (port) {
1388 case 0:
1389 *res = 0x2f8;
1390 return (0);
1391 case 1:
1392 *res = 0x2e8;
1393 return (0);
1394 case 2:
1395 *res = 0x3f8;
1396 return (0);
1397 case 3:
1398 *res = 0x3e8;
1399 return (0);
1400 case 4:
1401 *res = 0x278;
1402 return (0);
1403 }
1404 break;
1405 default:
1406 break;
1407 }
1408 return (ENXIO);
1409}
1410
1411static int
1412puc_config_siig(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port,
1413 intptr_t *res)
1414{
1415 const struct puc_cfg *cfg = sc->sc_cfg;
1416
1417 switch (cmd) {
1418 case PUC_CFG_GET_OFS:
1419 if (cfg->ports == PUC_PORT_8S) {
1420 *res = (port > 4) ? 8 * (port - 4) : 0;
1421 return (0);
1422 }
1423 break;
1424 case PUC_CFG_GET_RID:
1425 if (cfg->ports == PUC_PORT_8S) {
1426 *res = 0x10 + ((port > 4) ? 0x10 : 4 * port);
1427 return (0);
1428 }
1429 if (cfg->ports == PUC_PORT_2S1P) {
1430 switch (port) {
1431 case 0: *res = 0x10; return (0);
1432 case 1: *res = 0x14; return (0);
1433 case 2: *res = 0x1c; return (0);
1434 }
1435 }
1436 break;
1437 default:
1438 break;
1439 }
1440 return (ENXIO);
1441}
1442
1443static int
1444puc_config_timedia(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port,
1445 intptr_t *res)
1446{
1447 static const uint16_t dual[] = {
1448 0x0002, 0x4036, 0x4037, 0x4038, 0x4078, 0x4079, 0x4085,
1449 0x4088, 0x4089, 0x5037, 0x5078, 0x5079, 0x5085, 0x6079,
1450 0x7079, 0x8079, 0x8137, 0x8138, 0x8237, 0x8238, 0x9079,
1451 0x9137, 0x9138, 0x9237, 0x9238, 0xA079, 0xB079, 0xC079,
1452 0xD079, 0
1453 };
1454 static const uint16_t quad[] = {
1455 0x4055, 0x4056, 0x4095, 0x4096, 0x5056, 0x8156, 0x8157,
1456 0x8256, 0x8257, 0x9056, 0x9156, 0x9157, 0x9158, 0x9159,
1457 0x9256, 0x9257, 0xA056, 0xA157, 0xA158, 0xA159, 0xB056,
1458 0xB157, 0
1459 };
1460 static const uint16_t octa[] = {
1461 0x4065, 0x4066, 0x5065, 0x5066, 0x8166, 0x9066, 0x9166,
1462 0x9167, 0x9168, 0xA066, 0xA167, 0xA168, 0
1463 };
1464 static const struct {
1465 int ports;
1466 const uint16_t *ids;
1467 } subdevs[] = {
1468 { 2, dual },
1469 { 4, quad },
1470 { 8, octa },
1471 { 0, NULL }
1472 };
1473 static char desc[64];
1474 int dev, id;
1475 uint16_t subdev;
1476
1477 switch (cmd) {
1478 case PUC_CFG_GET_CLOCK:
1479 if (port < 2)
1480 *res = DEFAULT_RCLK * 8;
1481 else
1482 *res = DEFAULT_RCLK;
1483 return (0);
1484 case PUC_CFG_GET_DESC:
1485 snprintf(desc, sizeof(desc),
1486 "Timedia technology %d Port Serial", (int)sc->sc_cfg_data);
1487 *res = (intptr_t)desc;
1488 return (0);
1489 case PUC_CFG_GET_NPORTS:
1490 subdev = pci_get_subdevice(sc->sc_dev);
1491 dev = 0;
1492 while (subdevs[dev].ports != 0) {
1493 id = 0;
1494 while (subdevs[dev].ids[id] != 0) {
1495 if (subdev == subdevs[dev].ids[id]) {
1496 sc->sc_cfg_data = subdevs[dev].ports;
1497 *res = sc->sc_cfg_data;
1498 return (0);
1499 }
1500 id++;
1501 }
1502 dev++;
1503 }
1504 return (ENXIO);
1505 case PUC_CFG_GET_OFS:
1506 *res = (port == 1 || port == 3) ? 8 : 0;
1507 return (0);
1508 case PUC_CFG_GET_RID:
1509 *res = 0x10 + ((port > 3) ? port - 2 : port >> 1) * 4;
1510 return (0);
1511 case PUC_CFG_GET_TYPE:
1512 *res = PUC_TYPE_SERIAL;
1513 return (0);
1514 default:
1515 break;
1516 }
1517 return (ENXIO);
1518}
1519
1520static int
1521puc_config_oxford_pci954(struct puc_softc *sc, enum puc_cfg_cmd cmd,
1522 int port __unused, intptr_t *res)
1523{
1524
1525 switch (cmd) {
1526 case PUC_CFG_GET_CLOCK:
1527 /*
1528 * OXu16PCI954 use a 14.7456 MHz clock by default while
1529 * OX16PCI954 and OXm16PCI954 employ a 1.8432 MHz one.
1530 */
1531 if (pci_get_revid(sc->sc_dev) == 1)
1532 *res = DEFAULT_RCLK * 8;
1533 else
1534 *res = DEFAULT_RCLK;
1535 return (0);
1536 default:
1537 break;
1538 }
1539 return (ENXIO);
1540}
1541
1542static int
1543puc_config_oxford_pcie(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port,
1544 intptr_t *res)
1545{
1546 const struct puc_cfg *cfg = sc->sc_cfg;
1547 int idx;
1548 struct puc_bar *bar;
1549 uint8_t value;
1550
1551 switch (cmd) {
1552 case PUC_CFG_SETUP:
1553 device_printf(sc->sc_dev, "%d UARTs detected\n",
1554 sc->sc_nports);
1555
1556 /* Set UARTs to enhanced mode */
1557 bar = puc_get_bar(sc, cfg->rid);
1558 if (bar == NULL)
1559 return (ENXIO);
1560 for (idx = 0; idx < sc->sc_nports; idx++) {
1561 value = bus_read_1(bar->b_res, 0x1000 + (idx << 9) +
1562 0x92);
1563 bus_write_1(bar->b_res, 0x1000 + (idx << 9) + 0x92,
1564 value | 0x10);
1565 }
1566 return (0);
1567 case PUC_CFG_GET_LEN:
1568 *res = 0x200;
1569 return (0);
1570 case PUC_CFG_GET_NPORTS:
1571 /*
1572 * Check if we are being called from puc_bfe_attach()
1573 * or puc_bfe_probe(). If puc_bfe_probe(), we cannot
1574 * puc_get_bar(), so we return a value of 16. This has cosmetic
1575 * side-effects at worst; in PUC_CFG_GET_DESC,
1576 * (int)sc->sc_cfg_data will not contain the true number of
1577 * ports in PUC_CFG_GET_DESC, but we are not implementing that
1578 * call for this device family anyway.
1579 *
1580 * The check is for initialisation of sc->sc_bar[idx], which is
1581 * only done in puc_bfe_attach().
1582 */
1583 idx = 0;
1584 do {
1585 if (sc->sc_bar[idx++].b_rid != -1) {
1586 sc->sc_cfg_data = 16;
1587 *res = sc->sc_cfg_data;
1588 return (0);
1589 }
1590 } while (idx < PUC_PCI_BARS);
1591
1592 bar = puc_get_bar(sc, cfg->rid);
1593 if (bar == NULL)
1594 return (ENXIO);
1595
1596 value = bus_read_1(bar->b_res, 0x04);
1597 if (value == 0)
1598 return (ENXIO);
1599
1600 sc->sc_cfg_data = value;
1601 *res = sc->sc_cfg_data;
1602 return (0);
1603 case PUC_CFG_GET_OFS:
1604 *res = 0x1000 + (port << 9);
1605 return (0);
1606 case PUC_CFG_GET_TYPE:
1607 *res = PUC_TYPE_SERIAL;
1608 return (0);
1609 default:
1610 break;
1611 }
1612 return (ENXIO);
1613}
1614
1615static int
1616puc_config_titan(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port,
1617 intptr_t *res)
1618{
1619 switch (cmd) {
1620 case PUC_CFG_GET_OFS:
1621 *res = (port < 3) ? 0 : (port - 2) << 3;
1622 return (0);
1623 case PUC_CFG_GET_RID:
1624 *res = 0x14 + ((port >= 2) ? 0x0c : port << 2);
1625 return (0);
1626 default:
1627 break;
1628 }
1629 return (ENXIO);
1630}