62 DEVMETHOD(device_shutdown, bus_generic_shutdown), 63 DEVMETHOD(device_suspend, bus_generic_suspend), 64 DEVMETHOD(device_resume, bus_generic_resume), 65 66 /* Bus interface */ 67 DEVMETHOD(bus_print_child, bus_generic_print_child), 68 DEVMETHOD(bus_read_ivar, pcib_read_ivar), 69 DEVMETHOD(bus_write_ivar, pcib_write_ivar), 70 DEVMETHOD(bus_alloc_resource, pcib_alloc_resource), 71 DEVMETHOD(bus_release_resource, bus_generic_release_resource), 72 DEVMETHOD(bus_activate_resource, bus_generic_activate_resource), 73 DEVMETHOD(bus_deactivate_resource, bus_generic_deactivate_resource), 74 DEVMETHOD(bus_setup_intr, bus_generic_setup_intr), 75 DEVMETHOD(bus_teardown_intr, bus_generic_teardown_intr), 76 77 /* pcib interface */ 78 DEVMETHOD(pcib_maxslots, pcib_maxslots), 79 DEVMETHOD(pcib_read_config, pcib_read_config), 80 DEVMETHOD(pcib_write_config, pcib_write_config), 81 DEVMETHOD(pcib_route_interrupt, pcib_route_interrupt), 82 83 { 0, 0 } 84}; 85 86static driver_t pcib_driver = { 87 "pcib", 88 pcib_methods, 89 sizeof(struct pcib_softc), 90}; 91 92devclass_t pcib_devclass; 93 94DRIVER_MODULE(pcib, pci, pcib_driver, pcib_devclass, 0, 0); 95 96/* 97 * Generic device interface 98 */ 99static int 100pcib_probe(device_t dev) 101{ 102 if ((pci_get_class(dev) == PCIC_BRIDGE) && 103 (pci_get_subclass(dev) == PCIS_BRIDGE_PCI)) { 104 device_set_desc(dev, "PCI-PCI bridge"); 105 return(-10000); 106 } 107 return(ENXIO); 108} 109 110void 111pcib_attach_common(device_t dev) 112{ 113 struct pcib_softc *sc; 114 uint8_t iolow; 115 116 sc = device_get_softc(dev); 117 sc->dev = dev; 118 119 /* 120 * Get current bridge configuration. 121 */ 122 sc->command = pci_read_config(dev, PCIR_COMMAND, 1); 123 sc->secbus = pci_read_config(dev, PCIR_SECBUS_1, 1); 124 sc->subbus = pci_read_config(dev, PCIR_SUBBUS_1, 1); 125 sc->secstat = pci_read_config(dev, PCIR_SECSTAT_1, 2); 126 sc->bridgectl = pci_read_config(dev, PCIR_BRIDGECTL_1, 2); 127 sc->seclat = pci_read_config(dev, PCIR_SECLAT_1, 1); 128 129 /* 130 * Determine current I/O decode. 131 */ 132 if (sc->command & PCIM_CMD_PORTEN) { 133 iolow = pci_read_config(dev, PCIR_IOBASEL_1, 1); 134 if ((iolow & PCIM_BRIO_MASK) == PCIM_BRIO_32) { 135 sc->iobase = PCI_PPBIOBASE(pci_read_config(dev, PCIR_IOBASEH_1, 2), 136 pci_read_config(dev, PCIR_IOBASEL_1, 1)); 137 } else { 138 sc->iobase = PCI_PPBIOBASE(0, pci_read_config(dev, PCIR_IOBASEL_1, 1)); 139 } 140 141 iolow = pci_read_config(dev, PCIR_IOLIMITL_1, 1); 142 if ((iolow & PCIM_BRIO_MASK) == PCIM_BRIO_32) { 143 sc->iolimit = PCI_PPBIOLIMIT(pci_read_config(dev, PCIR_IOLIMITH_1, 2), 144 pci_read_config(dev, PCIR_IOLIMITL_1, 1)); 145 } else { 146 sc->iolimit = PCI_PPBIOLIMIT(0, pci_read_config(dev, PCIR_IOLIMITL_1, 1)); 147 } 148 } 149 150 /* 151 * Determine current memory decode. 152 */ 153 if (sc->command & PCIM_CMD_MEMEN) { 154 sc->membase = PCI_PPBMEMBASE(0, pci_read_config(dev, PCIR_MEMBASE_1, 2)); 155 sc->memlimit = PCI_PPBMEMLIMIT(0, pci_read_config(dev, PCIR_MEMLIMIT_1, 2)); 156 sc->pmembase = PCI_PPBMEMBASE((pci_addr_t)pci_read_config(dev, PCIR_PMBASEH_1, 4), 157 pci_read_config(dev, PCIR_PMBASEL_1, 2)); 158 sc->pmemlimit = PCI_PPBMEMLIMIT((pci_addr_t)pci_read_config(dev, PCIR_PMLIMITH_1, 4), 159 pci_read_config(dev, PCIR_PMLIMITL_1, 2)); 160 } 161 162 /* 163 * Quirk handling. 164 */ 165 switch (pci_get_devid(dev)) { 166 case 0x12258086: /* Intel 82454KX/GX (Orion) */ 167 { 168 uint8_t supbus; 169 170 supbus = pci_read_config(dev, 0x41, 1); 171 if (supbus != 0xff) { 172 sc->secbus = supbus + 1; 173 sc->subbus = supbus + 1; 174 } 175 break; 176 } 177 178 /* 179 * The i82380FB mobile docking controller is a PCI-PCI bridge, 180 * and it is a subtractive bridge. However, the ProgIf is wrong 181 * so the normal setting of PCIB_SUBTRACTIVE bit doesn't 182 * happen. There's also a Toshiba bridge that behaves this 183 * way. 184 */ 185 case 0x124b8086: /* Intel 82380FB Mobile */ 186 case 0x060513d7: /* Toshiba ???? */ 187 sc->flags |= PCIB_SUBTRACTIVE; 188 break; 189 } 190 191 /* 192 * Intel 815, 845 and other chipsets say they are PCI-PCI bridges, 193 * but have a ProgIF of 0x80. The 82801 family (AA, AB, BAM/CAM, 194 * BA/CA/DB and E) PCI bridges are HUB-PCI bridges, in Intelese. 195 * This means they act as if they were subtractively decoding 196 * bridges and pass all transactions. Mark them and real ProgIf 1 197 * parts as subtractive. 198 */ 199 if ((pci_get_devid(dev) & 0xff00ffff) == 0x24008086 || 200 pci_read_config(dev, PCIR_PROGIF, 1) == 1) 201 sc->flags |= PCIB_SUBTRACTIVE; 202 203 if (bootverbose) { 204 device_printf(dev, " secondary bus %d\n", sc->secbus); 205 device_printf(dev, " subordinate bus %d\n", sc->subbus); 206 device_printf(dev, " I/O decode 0x%x-0x%x\n", sc->iobase, sc->iolimit); 207 device_printf(dev, " memory decode 0x%x-0x%x\n", sc->membase, sc->memlimit); 208 device_printf(dev, " prefetched decode 0x%x-0x%x\n", sc->pmembase, sc->pmemlimit); 209 if (sc->flags & PCIB_SUBTRACTIVE) 210 device_printf(dev, " Subtractively decoded bridge.\n"); 211 } 212 213 /* 214 * XXX If the secondary bus number is zero, we should assign a bus number 215 * since the BIOS hasn't, then initialise the bridge. 216 */ 217 218 /* 219 * XXX If the subordinate bus number is less than the secondary bus number, 220 * we should pick a better value. One sensible alternative would be to 221 * pick 255; the only tradeoff here is that configuration transactions 222 * would be more widely routed than absolutely necessary. 223 */ 224} 225 226int 227pcib_attach(device_t dev) 228{ 229 struct pcib_softc *sc; 230 device_t child; 231 232 pcib_attach_common(dev); 233 sc = device_get_softc(dev); 234 if (sc->secbus != 0) { 235 child = device_add_child(dev, "pci", sc->secbus); 236 if (child != NULL) 237 return(bus_generic_attach(dev)); 238 } 239 240 /* no secondary bus; we should have fixed this */ 241 return(0); 242} 243 244int 245pcib_read_ivar(device_t dev, device_t child, int which, uintptr_t *result) 246{ 247 struct pcib_softc *sc = device_get_softc(dev); 248 249 switch (which) { 250 case PCIB_IVAR_BUS: 251 *result = sc->secbus; 252 return(0); 253 } 254 return(ENOENT); 255} 256 257int 258pcib_write_ivar(device_t dev, device_t child, int which, uintptr_t value) 259{ 260 struct pcib_softc *sc = device_get_softc(dev); 261 262 switch (which) { 263 case PCIB_IVAR_BUS: 264 sc->secbus = value; 265 break; 266 } 267 return(ENOENT); 268} 269 270/* 271 * Is the prefetch window open (eg, can we allocate memory in it?) 272 */ 273static int 274pcib_is_prefetch_open(struct pcib_softc *sc) 275{ 276 return (sc->pmembase > 0 && sc->pmembase < sc->pmemlimit); 277} 278 279/* 280 * Is the nonprefetch window open (eg, can we allocate memory in it?) 281 */ 282static int 283pcib_is_nonprefetch_open(struct pcib_softc *sc) 284{ 285 return (sc->membase > 0 && sc->membase < sc->memlimit); 286} 287 288/* 289 * Is the io window open (eg, can we allocate ports in it?) 290 */ 291static int 292pcib_is_io_open(struct pcib_softc *sc) 293{ 294 return (sc->iobase > 0 && sc->iobase < sc->iolimit); 295} 296 297/* 298 * We have to trap resource allocation requests and ensure that the bridge 299 * is set up to, or capable of handling them. 300 */ 301struct resource * 302pcib_alloc_resource(device_t dev, device_t child, int type, int *rid, 303 u_long start, u_long end, u_long count, u_int flags) 304{ 305 struct pcib_softc *sc = device_get_softc(dev); 306 int ok; 307 308 /* 309 * Fail the allocation for this range if it's not supported. 310 */ 311 switch (type) { 312 case SYS_RES_IOPORT: 313 ok = 0; 314 if (!pcib_is_io_open(sc)) 315 break; 316 ok = (start >= sc->iobase && end <= sc->iolimit); 317 318 /* 319 * Make sure we allow access to VGA I/O addresses when the 320 * bridge has the "VGA Enable" bit set. 321 */ 322 if (!ok && pci_is_vga_ioport_range(start, end)) 323 ok = (sc->bridgectl & PCIB_BCR_VGA_ENABLE) ? 1 : 0; 324 325 if ((sc->flags & PCIB_SUBTRACTIVE) == 0) { 326 if (!ok) { 327 if (start < sc->iobase) 328 start = sc->iobase; 329 if (end > sc->iolimit) 330 end = sc->iolimit; 331 if (start < end) 332 ok = 1; 333 } 334 } else { 335 ok = 1; 336#if 1 337 if (start < sc->iobase && end > sc->iolimit) { 338 start = sc->iobase; 339 end = sc->iolimit; 340 } 341#endif 342 } 343 if (end < start) { 344 device_printf(dev, "ioport: end (%lx) < start (%lx)\n", 345 end, start); 346 start = 0; 347 end = 0; 348 ok = 0; 349 } 350 if (!ok) { 351 device_printf(dev, "%s requested unsupported I/O " 352 "range 0x%lx-0x%lx (decoding 0x%x-0x%x)\n", 353 device_get_nameunit(child), start, end, 354 sc->iobase, sc->iolimit); 355 return (NULL); 356 } 357 if (bootverbose) 358 device_printf(dev, 359 "%s requested I/O range 0x%lx-0x%lx: in range\n", 360 device_get_nameunit(child), start, end); 361 break; 362 363 case SYS_RES_MEMORY: 364 ok = 0; 365 if (pcib_is_nonprefetch_open(sc)) 366 ok = ok || (start >= sc->membase && end <= sc->memlimit); 367 if (pcib_is_prefetch_open(sc)) 368 ok = ok || (start >= sc->pmembase && end <= sc->pmemlimit); 369 370 /* 371 * Make sure we allow access to VGA memory addresses when the 372 * bridge has the "VGA Enable" bit set. 373 */ 374 if (!ok && pci_is_vga_memory_range(start, end)) 375 ok = (sc->bridgectl & PCIB_BCR_VGA_ENABLE) ? 1 : 0; 376 377 if ((sc->flags & PCIB_SUBTRACTIVE) == 0) { 378 if (!ok) { 379 ok = 1; 380 if (flags & RF_PREFETCHABLE) { 381 if (pcib_is_prefetch_open(sc)) { 382 if (start < sc->pmembase) 383 start = sc->pmembase; 384 if (end > sc->pmemlimit) 385 end = sc->pmemlimit; 386 } else { 387 ok = 0; 388 } 389 } else { /* non-prefetchable */ 390 if (pcib_is_nonprefetch_open(sc)) { 391 if (start < sc->membase) 392 start = sc->membase; 393 if (end > sc->memlimit) 394 end = sc->memlimit; 395 } else { 396 ok = 0; 397 } 398 } 399 } 400 } else if (!ok) { 401 ok = 1; /* subtractive bridge: always ok */ 402#if 1 403 if (pcib_is_nonprefetch_open(sc)) { 404 if (start < sc->membase && end > sc->memlimit) { 405 start = sc->membase; 406 end = sc->memlimit; 407 } 408 } 409 if (pcib_is_prefetch_open(sc)) { 410 if (start < sc->pmembase && end > sc->pmemlimit) { 411 start = sc->pmembase; 412 end = sc->pmemlimit; 413 } 414 } 415#endif 416 } 417 if (end < start) { 418 device_printf(dev, "memory: end (%lx) < start (%lx)\n", 419 end, start); 420 start = 0; 421 end = 0; 422 ok = 0; 423 } 424 if (!ok && bootverbose) 425 device_printf(dev, 426 "%s requested unsupported memory range " 427 "0x%lx-0x%lx (decoding 0x%x-0x%x, 0x%x-0x%x)\n", 428 device_get_nameunit(child), start, end, 429 sc->membase, sc->memlimit, sc->pmembase, 430 sc->pmemlimit); 431 if (!ok) 432 return (NULL); 433 if (bootverbose) 434 device_printf(dev,"%s requested memory range " 435 "0x%lx-0x%lx: good\n", 436 device_get_nameunit(child), start, end); 437 break; 438 439 default: 440 break; 441 } 442 /* 443 * Bridge is OK decoding this resource, so pass it up. 444 */ 445 return (bus_generic_alloc_resource(dev, child, type, rid, start, end, 446 count, flags)); 447} 448 449/* 450 * PCIB interface. 451 */ 452int 453pcib_maxslots(device_t dev) 454{ 455 return(PCI_SLOTMAX); 456} 457 458/* 459 * Since we are a child of a PCI bus, its parent must support the pcib interface. 460 */ 461uint32_t 462pcib_read_config(device_t dev, int b, int s, int f, int reg, int width) 463{ 464 return(PCIB_READ_CONFIG(device_get_parent(device_get_parent(dev)), b, s, f, reg, width)); 465} 466 467void 468pcib_write_config(device_t dev, int b, int s, int f, int reg, uint32_t val, int width) 469{ 470 PCIB_WRITE_CONFIG(device_get_parent(device_get_parent(dev)), b, s, f, reg, val, width); 471} 472 473/* 474 * Route an interrupt across a PCI bridge. 475 */ 476int 477pcib_route_interrupt(device_t pcib, device_t dev, int pin) 478{ 479 device_t bus; 480 int parent_intpin; 481 int intnum; 482 483 /* 484 * 485 * The PCI standard defines a swizzle of the child-side device/intpin to 486 * the parent-side intpin as follows. 487 * 488 * device = device on child bus 489 * child_intpin = intpin on child bus slot (0-3) 490 * parent_intpin = intpin on parent bus slot (0-3) 491 * 492 * parent_intpin = (device + child_intpin) % 4 493 */ 494 parent_intpin = (pci_get_slot(dev) + (pin - 1)) % 4; 495 496 /* 497 * Our parent is a PCI bus. Its parent must export the pcib interface 498 * which includes the ability to route interrupts. 499 */ 500 bus = device_get_parent(pcib); 501 intnum = PCIB_ROUTE_INTERRUPT(device_get_parent(bus), pcib, parent_intpin + 1); 502 if (PCI_INTERRUPT_VALID(intnum) && bootverbose) { 503 device_printf(pcib, "slot %d INT%c is routed to irq %d\n", 504 pci_get_slot(dev), 'A' + pin - 1, intnum); 505 } 506 return(intnum); 507} 508 509/* 510 * Try to read the bus number of a host-PCI bridge using appropriate config 511 * registers. 512 */ 513int 514host_pcib_get_busno(pci_read_config_fn read_config, int bus, int slot, int func, 515 uint8_t *busnum) 516{ 517 uint32_t id; 518 519 id = read_config(bus, slot, func, PCIR_DEVVENDOR, 4); 520 if (id == 0xffffffff) 521 return (0); 522 523 switch (id) { 524 case 0x12258086: 525 /* Intel 824?? */ 526 /* XXX This is a guess */ 527 /* *busnum = read_config(bus, slot, func, 0x41, 1); */ 528 *busnum = bus; 529 break; 530 case 0x84c48086: 531 /* Intel 82454KX/GX (Orion) */ 532 *busnum = read_config(bus, slot, func, 0x4a, 1); 533 break; 534 case 0x84ca8086: 535 /* 536 * For the 450nx chipset, there is a whole bundle of 537 * things pretending to be host bridges. The MIOC will 538 * be seen first and isn't really a pci bridge (the 539 * actual busses are attached to the PXB's). We need to 540 * read the registers of the MIOC to figure out the 541 * bus numbers for the PXB channels. 542 * 543 * Since the MIOC doesn't have a pci bus attached, we 544 * pretend it wasn't there. 545 */ 546 return (0); 547 case 0x84cb8086: 548 switch (slot) { 549 case 0x12: 550 /* Intel 82454NX PXB#0, Bus#A */ 551 *busnum = read_config(bus, 0x10, func, 0xd0, 1); 552 break; 553 case 0x13: 554 /* Intel 82454NX PXB#0, Bus#B */ 555 *busnum = read_config(bus, 0x10, func, 0xd1, 1) + 1; 556 break; 557 case 0x14: 558 /* Intel 82454NX PXB#1, Bus#A */ 559 *busnum = read_config(bus, 0x10, func, 0xd3, 1); 560 break; 561 case 0x15: 562 /* Intel 82454NX PXB#1, Bus#B */ 563 *busnum = read_config(bus, 0x10, func, 0xd4, 1) + 1; 564 break; 565 } 566 break; 567 568 /* ServerWorks -- vendor 0x1166 */ 569 case 0x00051166: 570 case 0x00061166: 571 case 0x00081166: 572 case 0x00091166: 573 case 0x00101166: 574 case 0x00111166: 575 case 0x00171166: 576 case 0x01011166: 577 case 0x010f1014: 578 case 0x02011166: 579 case 0x03021014: 580 *busnum = read_config(bus, slot, func, 0x44, 1); 581 break; 582 583 /* Compaq/HP -- vendor 0x0e11 */ 584 case 0x60100e11: 585 *busnum = read_config(bus, slot, func, 0xc8, 1); 586 break; 587 default: 588 /* Don't know how to read bus number. */ 589 return 0; 590 } 591 592 return 1; 593}
|