1/*- 2 * Copyright (c) 2013-2014 Bjoern A. Zeeb 3 * All rights reserved. 4 * 5 * This software was developed by SRI International and the University of 6 * Cambridge Computer Laboratory under DARPA/AFRL contract FA8750-11-C-0249 7 * ("MRC2"), as part of the DARPA MRC research programme. 8 * 9 * Redistribution and use in source and binary forms, with or without 10 * modification, are permitted provided that the following conditions 11 * are met: 12 * 1. Redistributions of source code must retain the above copyright 13 * notice, this list of conditions and the following disclaimer. 14 * 2. Redistributions in binary form must reproduce the above copyright 15 * notice, this list of conditions and the following disclaimer in the 16 * documentation and/or other materials provided with the distribution. 17 * 18 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 19 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 21 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 22 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 23 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 24 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 25 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 26 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 27 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 28 * SUCH DAMAGE. 29 * 30 * This driver is modelled after atse(4). We need to seriously reduce the 31 * per-driver code we have to write^wcopy & paste. 32 */ 33 34#include <sys/cdefs.h>
| 1/*- 2 * Copyright (c) 2013-2014 Bjoern A. Zeeb 3 * All rights reserved. 4 * 5 * This software was developed by SRI International and the University of 6 * Cambridge Computer Laboratory under DARPA/AFRL contract FA8750-11-C-0249 7 * ("MRC2"), as part of the DARPA MRC research programme. 8 * 9 * Redistribution and use in source and binary forms, with or without 10 * modification, are permitted provided that the following conditions 11 * are met: 12 * 1. Redistributions of source code must retain the above copyright 13 * notice, this list of conditions and the following disclaimer. 14 * 2. Redistributions in binary form must reproduce the above copyright 15 * notice, this list of conditions and the following disclaimer in the 16 * documentation and/or other materials provided with the distribution. 17 * 18 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 19 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 21 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 22 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 23 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 24 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 25 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 26 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 27 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 28 * SUCH DAMAGE. 29 * 30 * This driver is modelled after atse(4). We need to seriously reduce the 31 * per-driver code we have to write^wcopy & paste. 32 */ 33 34#include <sys/cdefs.h>
|
35__FBSDID("$FreeBSD: head/sys/dev/netfpga10g/nf10bmac/if_nf10bmac_fdt.c 265766 2014-05-09 12:59:38Z bz $");
| 35__FBSDID("$FreeBSD: head/sys/dev/netfpga10g/nf10bmac/if_nf10bmac_fdt.c 267920 2014-06-26 17:10:07Z bz $");
|
36 37#include <sys/param.h> 38#include <sys/bus.h> 39#include <sys/kernel.h> 40#include <sys/module.h> 41#include <sys/rman.h> 42#include <sys/socket.h> 43#include <sys/systm.h> 44 45#include <machine/bus.h> 46#include <machine/resource.h> 47 48#include <net/ethernet.h> 49#include <net/if.h> 50#include <net/if_media.h> 51#include <net/if_var.h> 52 53#include <dev/fdt/fdt_common.h> 54#include <dev/ofw/openfirm.h> 55#include <dev/ofw/ofw_bus.h> 56#include <dev/ofw/ofw_bus_subr.h> 57 58#include "if_nf10bmacreg.h" 59 60static int 61nf10bmac_probe_fdt(device_t dev) 62{ 63 64 if (!ofw_bus_status_okay(dev)) 65 return (ENXIO); 66 67 if (ofw_bus_is_compatible(dev, "netfpag10g,nf10bmac")) { 68 device_set_desc(dev, "NetFPGA-10G Embedded CPU Ethernet Core"); 69 return (BUS_PROBE_DEFAULT); 70 } 71 72 return (ENXIO); 73} 74 75static int 76nf10bmac_attach_fdt(device_t dev) 77{ 78 struct nf10bmac_softc *sc; 79 int error; 80 81 sc = device_get_softc(dev); 82 sc->nf10bmac_dev = dev; 83 sc->nf10bmac_unit = device_get_unit(dev); 84 85 /* 86 * FDT lists our resources. For convenience we use three different 87 * mappings. We need to attach them in the oder specified in .dts: 88 * LOOP (size 0x1f), TX (0x2f), RX (0x2f), INTR (0xf). 89 */ 90 91 /* 92 * LOOP memory region (this could be a general control region).
| 36 37#include <sys/param.h> 38#include <sys/bus.h> 39#include <sys/kernel.h> 40#include <sys/module.h> 41#include <sys/rman.h> 42#include <sys/socket.h> 43#include <sys/systm.h> 44 45#include <machine/bus.h> 46#include <machine/resource.h> 47 48#include <net/ethernet.h> 49#include <net/if.h> 50#include <net/if_media.h> 51#include <net/if_var.h> 52 53#include <dev/fdt/fdt_common.h> 54#include <dev/ofw/openfirm.h> 55#include <dev/ofw/ofw_bus.h> 56#include <dev/ofw/ofw_bus_subr.h> 57 58#include "if_nf10bmacreg.h" 59 60static int 61nf10bmac_probe_fdt(device_t dev) 62{ 63 64 if (!ofw_bus_status_okay(dev)) 65 return (ENXIO); 66 67 if (ofw_bus_is_compatible(dev, "netfpag10g,nf10bmac")) { 68 device_set_desc(dev, "NetFPGA-10G Embedded CPU Ethernet Core"); 69 return (BUS_PROBE_DEFAULT); 70 } 71 72 return (ENXIO); 73} 74 75static int 76nf10bmac_attach_fdt(device_t dev) 77{ 78 struct nf10bmac_softc *sc; 79 int error; 80 81 sc = device_get_softc(dev); 82 sc->nf10bmac_dev = dev; 83 sc->nf10bmac_unit = device_get_unit(dev); 84 85 /* 86 * FDT lists our resources. For convenience we use three different 87 * mappings. We need to attach them in the oder specified in .dts: 88 * LOOP (size 0x1f), TX (0x2f), RX (0x2f), INTR (0xf). 89 */ 90 91 /* 92 * LOOP memory region (this could be a general control region).
|
93 * 0x00: 32bit register to enable a Y-"lopback".
| 93 * 0x00: 32/64bit register to enable a Y-"lopback".
|
94 */ 95 sc->nf10bmac_ctrl_rid = 0; 96 sc->nf10bmac_ctrl_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, 97 &sc->nf10bmac_ctrl_rid, RF_ACTIVE); 98 if (sc->nf10bmac_ctrl_res == NULL) { 99 device_printf(dev, "failed to map memory for CTRL region\n"); 100 error = ENXIO; 101 goto err; 102 } 103 if (bootverbose) 104 device_printf(sc->nf10bmac_dev, "CTRL region at mem %p-%p\n", 105 (void *)rman_get_start(sc->nf10bmac_ctrl_res), 106 (void *)(rman_get_start(sc->nf10bmac_ctrl_res) + 107 rman_get_size(sc->nf10bmac_ctrl_res))); 108 109 /* 110 * TX and TX metadata FIFO memory region.
| 94 */ 95 sc->nf10bmac_ctrl_rid = 0; 96 sc->nf10bmac_ctrl_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, 97 &sc->nf10bmac_ctrl_rid, RF_ACTIVE); 98 if (sc->nf10bmac_ctrl_res == NULL) { 99 device_printf(dev, "failed to map memory for CTRL region\n"); 100 error = ENXIO; 101 goto err; 102 } 103 if (bootverbose) 104 device_printf(sc->nf10bmac_dev, "CTRL region at mem %p-%p\n", 105 (void *)rman_get_start(sc->nf10bmac_ctrl_res), 106 (void *)(rman_get_start(sc->nf10bmac_ctrl_res) + 107 rman_get_size(sc->nf10bmac_ctrl_res))); 108 109 /* 110 * TX and TX metadata FIFO memory region.
|
111 * 0x00: 32bit FIFO data, 112 * 0x08: 32bit FIFO metadata, 113 * 0x10: 32bit packet length.
| 111 * 0x00: 32/64bit FIFO data, 112 * 0x08: 32/64bit FIFO metadata, 113 * 0x10: 32/64bit packet length.
|
114 */ 115 sc->nf10bmac_tx_mem_rid = 1; 116 sc->nf10bmac_tx_mem_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, 117 &sc->nf10bmac_tx_mem_rid, RF_ACTIVE); 118 if (sc->nf10bmac_tx_mem_res == NULL) { 119 device_printf(dev, "failed to map memory for TX FIFO\n"); 120 error = ENXIO; 121 goto err; 122 } 123 if (bootverbose) 124 device_printf(sc->nf10bmac_dev, "TX FIFO at mem %p-%p\n", 125 (void *)rman_get_start(sc->nf10bmac_tx_mem_res), 126 (void *)(rman_get_start(sc->nf10bmac_tx_mem_res) + 127 rman_get_size(sc->nf10bmac_tx_mem_res))); 128 129 /* 130 * RX and RXC metadata FIFO memory region.
| 114 */ 115 sc->nf10bmac_tx_mem_rid = 1; 116 sc->nf10bmac_tx_mem_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, 117 &sc->nf10bmac_tx_mem_rid, RF_ACTIVE); 118 if (sc->nf10bmac_tx_mem_res == NULL) { 119 device_printf(dev, "failed to map memory for TX FIFO\n"); 120 error = ENXIO; 121 goto err; 122 } 123 if (bootverbose) 124 device_printf(sc->nf10bmac_dev, "TX FIFO at mem %p-%p\n", 125 (void *)rman_get_start(sc->nf10bmac_tx_mem_res), 126 (void *)(rman_get_start(sc->nf10bmac_tx_mem_res) + 127 rman_get_size(sc->nf10bmac_tx_mem_res))); 128 129 /* 130 * RX and RXC metadata FIFO memory region.
|
131 * 0x00: 32bit FIFO data, 132 * 0x08: 32bit FIFO metadata, 133 * 0x10: 32bit packet length.
| 131 * 0x00: 32/64bit FIFO data, 132 * 0x08: 32/64bit FIFO metadata, 133 * 0x10: 32/64bit packet length.
|
134 */ 135 sc->nf10bmac_rx_mem_rid = 2; 136 sc->nf10bmac_rx_mem_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, 137 &sc->nf10bmac_rx_mem_rid, RF_ACTIVE); 138 if (sc->nf10bmac_rx_mem_res == NULL) { 139 device_printf(dev, "failed to map memory for RX FIFO\n"); 140 error = ENXIO; 141 goto err; 142 } 143 if (bootverbose) 144 device_printf(sc->nf10bmac_dev, "RX FIFO at mem %p-%p\n", 145 (void *)rman_get_start(sc->nf10bmac_rx_mem_res), 146 (void *)(rman_get_start(sc->nf10bmac_rx_mem_res) + 147 rman_get_size(sc->nf10bmac_rx_mem_res))); 148 149 /* 150 * Interrupt handling registers.
| 134 */ 135 sc->nf10bmac_rx_mem_rid = 2; 136 sc->nf10bmac_rx_mem_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, 137 &sc->nf10bmac_rx_mem_rid, RF_ACTIVE); 138 if (sc->nf10bmac_rx_mem_res == NULL) { 139 device_printf(dev, "failed to map memory for RX FIFO\n"); 140 error = ENXIO; 141 goto err; 142 } 143 if (bootverbose) 144 device_printf(sc->nf10bmac_dev, "RX FIFO at mem %p-%p\n", 145 (void *)rman_get_start(sc->nf10bmac_rx_mem_res), 146 (void *)(rman_get_start(sc->nf10bmac_rx_mem_res) + 147 rman_get_size(sc->nf10bmac_rx_mem_res))); 148 149 /* 150 * Interrupt handling registers.
|
151 * 0x00: 32bit register to clear (and disable) the RX interrupt. 152 * 0x08: 32bit register to enable or disable the RX interrupt.
| 151 * 0x00: 32/64bit register to clear (and disable) the RX interrupt. 152 * 0x08: 32/64bit register to enable or disable the RX interrupt.
|
153 */ 154 sc->nf10bmac_intr_rid = 3; 155 sc->nf10bmac_intr_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, 156 &sc->nf10bmac_intr_rid, RF_ACTIVE); 157 if (sc->nf10bmac_intr_res == NULL) { 158 device_printf(dev, "failed to map memory for INTR region\n"); 159 error = ENXIO; 160 goto err; 161 } 162 if (bootverbose) 163 device_printf(sc->nf10bmac_dev, "INTR region at mem %p-%p\n", 164 (void *)rman_get_start(sc->nf10bmac_intr_res), 165 (void *)(rman_get_start(sc->nf10bmac_intr_res) + 166 rman_get_size(sc->nf10bmac_intr_res))); 167 168 /* (Optional) RX and TX IRQ. */ 169 sc->nf10bmac_rx_irq_rid = 0; 170 sc->nf10bmac_rx_irq_res = bus_alloc_resource_any(dev, SYS_RES_IRQ, 171 &sc->nf10bmac_rx_irq_rid, RF_ACTIVE | RF_SHAREABLE); 172 173 error = nf10bmac_attach(dev); 174 if (error) 175 goto err; 176 177 return (0); 178 179err: 180 /* Cleanup. */ 181 nf10bmac_detach_resources(dev); 182 183 return (error); 184} 185 186static device_method_t nf10bmac_methods_fdt[] = { 187 /* Device interface */ 188 DEVMETHOD(device_probe, nf10bmac_probe_fdt), 189 DEVMETHOD(device_attach, nf10bmac_attach_fdt), 190 DEVMETHOD(device_detach, nf10bmac_detach_dev), 191 192 DEVMETHOD_END 193}; 194 195static driver_t nf10bmac_driver_fdt = { 196 "nf10bmac", 197 nf10bmac_methods_fdt, 198 sizeof(struct nf10bmac_softc) 199}; 200 201DRIVER_MODULE(nf10bmac, simplebus, nf10bmac_driver_fdt, nf10bmac_devclass, 0,0); 202 203/* end */
| 153 */ 154 sc->nf10bmac_intr_rid = 3; 155 sc->nf10bmac_intr_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, 156 &sc->nf10bmac_intr_rid, RF_ACTIVE); 157 if (sc->nf10bmac_intr_res == NULL) { 158 device_printf(dev, "failed to map memory for INTR region\n"); 159 error = ENXIO; 160 goto err; 161 } 162 if (bootverbose) 163 device_printf(sc->nf10bmac_dev, "INTR region at mem %p-%p\n", 164 (void *)rman_get_start(sc->nf10bmac_intr_res), 165 (void *)(rman_get_start(sc->nf10bmac_intr_res) + 166 rman_get_size(sc->nf10bmac_intr_res))); 167 168 /* (Optional) RX and TX IRQ. */ 169 sc->nf10bmac_rx_irq_rid = 0; 170 sc->nf10bmac_rx_irq_res = bus_alloc_resource_any(dev, SYS_RES_IRQ, 171 &sc->nf10bmac_rx_irq_rid, RF_ACTIVE | RF_SHAREABLE); 172 173 error = nf10bmac_attach(dev); 174 if (error) 175 goto err; 176 177 return (0); 178 179err: 180 /* Cleanup. */ 181 nf10bmac_detach_resources(dev); 182 183 return (error); 184} 185 186static device_method_t nf10bmac_methods_fdt[] = { 187 /* Device interface */ 188 DEVMETHOD(device_probe, nf10bmac_probe_fdt), 189 DEVMETHOD(device_attach, nf10bmac_attach_fdt), 190 DEVMETHOD(device_detach, nf10bmac_detach_dev), 191 192 DEVMETHOD_END 193}; 194 195static driver_t nf10bmac_driver_fdt = { 196 "nf10bmac", 197 nf10bmac_methods_fdt, 198 sizeof(struct nf10bmac_softc) 199}; 200 201DRIVER_MODULE(nf10bmac, simplebus, nf10bmac_driver_fdt, nf10bmac_devclass, 0,0); 202 203/* end */
|