1/*- 2 * Copyright (c) 1998, 2001 Nicolas Souchu 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 17 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 18 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 24 * SUCH DAMAGE. 25 *
| 1/*- 2 * Copyright (c) 1998, 2001 Nicolas Souchu 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 17 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 18 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 24 * SUCH DAMAGE. 25 *
|
46 47/* 48 * i2c modes 49 */ 50#define IIC_MASTER 0x1 51#define IIC_SLAVE 0x2 52#define IIC_POLLED 0x4 53 54/* 55 * i2c speed 56 */ 57#define IIC_UNKNOWN 0x0 58#define IIC_SLOW 0x1 59#define IIC_FAST 0x2 60#define IIC_FASTEST 0x3 61 62#define IIC_LAST_READ 0x1 63 64/* 65 * callback index 66 */ 67#define IIC_REQUEST_BUS 0x1 68#define IIC_RELEASE_BUS 0x2 69 70/* 71 * interrupt events 72 */ 73#define INTR_GENERAL 0x1 /* general call received */ 74#define INTR_START 0x2 /* the I2C interface is addressed */ 75#define INTR_STOP 0x3 /* stop condition received */ 76#define INTR_RECEIVE 0x4 /* character received */ 77#define INTR_TRANSMIT 0x5 /* character to transmit */ 78#define INTR_ERROR 0x6 /* error */ 79#define INTR_NOACK 0x7 /* no ack from master receiver */ 80 81/* 82 * adapter layer errors 83 */ 84#define IIC_NOERR 0x0 /* no error occured */ 85#define IIC_EBUSERR 0x1 /* bus error (hardware not in expected state) */ 86#define IIC_ENOACK 0x2 /* ack not received until timeout */ 87#define IIC_ETIMEOUT 0x3 /* timeout */ 88#define IIC_EBUSBSY 0x4 /* bus busy (reserved by another client) */ 89#define IIC_ESTATUS 0x5 /* status error */ 90#define IIC_EUNDERFLOW 0x6 /* slave ready for more data */ 91#define IIC_EOVERFLOW 0x7 /* too much data */ 92#define IIC_ENOTSUPP 0x8 /* request not supported */ 93#define IIC_ENOADDR 0x9 /* no address assigned to the interface */ 94#define IIC_ERESOURCE 0xa /* resources (memory, whatever) unavailable */ 95 96/* 97 * Note that all iicbus functions return IIC_Exxxxx status values, 98 * except iic2errno() (obviously) and iicbus_started() (returns bool). 99 */ 100extern int iic2errno(int); 101extern int iicbus_request_bus(device_t, device_t, int); 102extern int iicbus_release_bus(device_t, device_t); 103extern device_t iicbus_alloc_bus(device_t); 104 105extern void iicbus_intr(device_t, int, char *); 106 107extern int iicbus_null_repeated_start(device_t, u_char); 108extern int iicbus_null_callback(device_t, int, caddr_t); 109 110#define iicbus_reset(bus,speed,addr,oldaddr) \ 111 (IICBUS_RESET(device_get_parent(bus), speed, addr, oldaddr)) 112 113/* basic I2C operations */ 114extern int iicbus_started(device_t); 115extern int iicbus_start(device_t, u_char, int); 116extern int iicbus_stop(device_t); 117extern int iicbus_repeated_start(device_t, u_char, int); 118extern int iicbus_write(device_t, const char *, int, int *, int); 119extern int iicbus_read(device_t, char *, int, int *, int, int); 120 121/* single byte read/write functions, start/stop not managed */ 122extern int iicbus_write_byte(device_t, char, int); 123extern int iicbus_read_byte(device_t, char *, int); 124 125/* Read/write operations with start/stop conditions managed */ 126extern int iicbus_block_write(device_t, u_char, char *, int, int *); 127extern int iicbus_block_read(device_t, u_char, char *, int, int *); 128 129/* vectors of iic operations to pass to bridge */ 130int iicbus_transfer(device_t bus, struct iic_msg *msgs, uint32_t nmsgs); 131int iicbus_transfer_gen(device_t bus, struct iic_msg *msgs, uint32_t nmsgs); 132 133#define IICBUS_MODVER 1 134#define IICBUS_MINVER 1 135#define IICBUS_MAXVER 1 136#define IICBUS_PREFVER IICBUS_MODVER 137 138extern driver_t iicbb_driver; 139extern devclass_t iicbb_devclass; 140 141#define IICBB_MODVER 1 142#define IICBB_MINVER 1 143#define IICBB_MAXVER 1 144#define IICBB_PREFVER IICBB_MODVER 145 146#endif
| 47 48/* 49 * i2c modes 50 */ 51#define IIC_MASTER 0x1 52#define IIC_SLAVE 0x2 53#define IIC_POLLED 0x4 54 55/* 56 * i2c speed 57 */ 58#define IIC_UNKNOWN 0x0 59#define IIC_SLOW 0x1 60#define IIC_FAST 0x2 61#define IIC_FASTEST 0x3 62 63#define IIC_LAST_READ 0x1 64 65/* 66 * callback index 67 */ 68#define IIC_REQUEST_BUS 0x1 69#define IIC_RELEASE_BUS 0x2 70 71/* 72 * interrupt events 73 */ 74#define INTR_GENERAL 0x1 /* general call received */ 75#define INTR_START 0x2 /* the I2C interface is addressed */ 76#define INTR_STOP 0x3 /* stop condition received */ 77#define INTR_RECEIVE 0x4 /* character received */ 78#define INTR_TRANSMIT 0x5 /* character to transmit */ 79#define INTR_ERROR 0x6 /* error */ 80#define INTR_NOACK 0x7 /* no ack from master receiver */ 81 82/* 83 * adapter layer errors 84 */ 85#define IIC_NOERR 0x0 /* no error occured */ 86#define IIC_EBUSERR 0x1 /* bus error (hardware not in expected state) */ 87#define IIC_ENOACK 0x2 /* ack not received until timeout */ 88#define IIC_ETIMEOUT 0x3 /* timeout */ 89#define IIC_EBUSBSY 0x4 /* bus busy (reserved by another client) */ 90#define IIC_ESTATUS 0x5 /* status error */ 91#define IIC_EUNDERFLOW 0x6 /* slave ready for more data */ 92#define IIC_EOVERFLOW 0x7 /* too much data */ 93#define IIC_ENOTSUPP 0x8 /* request not supported */ 94#define IIC_ENOADDR 0x9 /* no address assigned to the interface */ 95#define IIC_ERESOURCE 0xa /* resources (memory, whatever) unavailable */ 96 97/* 98 * Note that all iicbus functions return IIC_Exxxxx status values, 99 * except iic2errno() (obviously) and iicbus_started() (returns bool). 100 */ 101extern int iic2errno(int); 102extern int iicbus_request_bus(device_t, device_t, int); 103extern int iicbus_release_bus(device_t, device_t); 104extern device_t iicbus_alloc_bus(device_t); 105 106extern void iicbus_intr(device_t, int, char *); 107 108extern int iicbus_null_repeated_start(device_t, u_char); 109extern int iicbus_null_callback(device_t, int, caddr_t); 110 111#define iicbus_reset(bus,speed,addr,oldaddr) \ 112 (IICBUS_RESET(device_get_parent(bus), speed, addr, oldaddr)) 113 114/* basic I2C operations */ 115extern int iicbus_started(device_t); 116extern int iicbus_start(device_t, u_char, int); 117extern int iicbus_stop(device_t); 118extern int iicbus_repeated_start(device_t, u_char, int); 119extern int iicbus_write(device_t, const char *, int, int *, int); 120extern int iicbus_read(device_t, char *, int, int *, int, int); 121 122/* single byte read/write functions, start/stop not managed */ 123extern int iicbus_write_byte(device_t, char, int); 124extern int iicbus_read_byte(device_t, char *, int); 125 126/* Read/write operations with start/stop conditions managed */ 127extern int iicbus_block_write(device_t, u_char, char *, int, int *); 128extern int iicbus_block_read(device_t, u_char, char *, int, int *); 129 130/* vectors of iic operations to pass to bridge */ 131int iicbus_transfer(device_t bus, struct iic_msg *msgs, uint32_t nmsgs); 132int iicbus_transfer_gen(device_t bus, struct iic_msg *msgs, uint32_t nmsgs); 133 134#define IICBUS_MODVER 1 135#define IICBUS_MINVER 1 136#define IICBUS_MAXVER 1 137#define IICBUS_PREFVER IICBUS_MODVER 138 139extern driver_t iicbb_driver; 140extern devclass_t iicbb_devclass; 141 142#define IICBB_MODVER 1 143#define IICBB_MINVER 1 144#define IICBB_MAXVER 1 145#define IICBB_PREFVER IICBB_MODVER 146 147#endif
|