1/*-
2 * All Rights Reserved, Copyright (C) Fujitsu Limited 1995
3 *
4 * This software may be used, modified, copied, distributed, and sold, in
5 * both source and binary form provided that the above copyright, these
6 * terms and the following disclaimer are retained. The name of the author
7 * and/or the contributor may not be used to endorse or promote products
8 * derived from this software without specific prior written permission.
9 *
10 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND THE CONTRIBUTOR ``AS IS'' AND
11 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
12 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
13 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR THE CONTRIBUTOR BE LIABLE
14 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
15 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
16 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION.
17 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
18 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
19 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
20 * SUCH DAMAGE.
21 *
22 */
23
24#include <sys/cdefs.h>
| 1/*-
2 * All Rights Reserved, Copyright (C) Fujitsu Limited 1995
3 *
4 * This software may be used, modified, copied, distributed, and sold, in
5 * both source and binary form provided that the above copyright, these
6 * terms and the following disclaimer are retained. The name of the author
7 * and/or the contributor may not be used to endorse or promote products
8 * derived from this software without specific prior written permission.
9 *
10 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND THE CONTRIBUTOR ``AS IS'' AND
11 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
12 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
13 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR THE CONTRIBUTOR BE LIABLE
14 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
15 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
16 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION.
17 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
18 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
19 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
20 * SUCH DAMAGE.
21 *
22 */
23
24#include <sys/cdefs.h>
|
25__FBSDID("$FreeBSD: head/sys/dev/fe/if_fe_pccard.c 189681 2009-03-11 08:12:28Z imp $");
| 25__FBSDID("$FreeBSD: head/sys/dev/fe/if_fe_pccard.c 189728 2009-03-12 07:18:27Z imp $");
|
26
27#include <sys/param.h>
28#include <sys/kernel.h>
29#include <sys/socket.h>
30#include <sys/systm.h>
31#include <sys/module.h>
32
33#include <sys/bus.h>
34#include <machine/bus.h>
35#include <sys/rman.h>
36
37#include <net/ethernet.h>
38#include <net/if.h>
39#include <net/if_mib.h>
40#include <net/if_media.h>
41
42#include <netinet/in.h>
43#include <netinet/if_ether.h>
44
45#include <dev/fe/mb86960.h>
46#include <dev/fe/if_fereg.h>
47#include <dev/fe/if_fevar.h>
48
49#include <dev/pccard/pccardvar.h>
50#include <dev/pccard/pccard_cis.h>
51
52#include "card_if.h"
53#include "pccarddevs.h"
54
55/*
56 * PC Card (PCMCIA) specific code.
57 */
58static int fe_pccard_probe(device_t);
59static int fe_pccard_attach(device_t);
60static int fe_pccard_detach(device_t);
61
62static const struct fe_pccard_product {
| 26
27#include <sys/param.h>
28#include <sys/kernel.h>
29#include <sys/socket.h>
30#include <sys/systm.h>
31#include <sys/module.h>
32
33#include <sys/bus.h>
34#include <machine/bus.h>
35#include <sys/rman.h>
36
37#include <net/ethernet.h>
38#include <net/if.h>
39#include <net/if_mib.h>
40#include <net/if_media.h>
41
42#include <netinet/in.h>
43#include <netinet/if_ether.h>
44
45#include <dev/fe/mb86960.h>
46#include <dev/fe/if_fereg.h>
47#include <dev/fe/if_fevar.h>
48
49#include <dev/pccard/pccardvar.h>
50#include <dev/pccard/pccard_cis.h>
51
52#include "card_if.h"
53#include "pccarddevs.h"
54
55/*
56 * PC Card (PCMCIA) specific code.
57 */
58static int fe_pccard_probe(device_t);
59static int fe_pccard_attach(device_t);
60static int fe_pccard_detach(device_t);
61
62static const struct fe_pccard_product {
|
63 struct pccard_product mpp_product;
| 63 struct pccard_product mpp_product;
|
64 int mpp_flags;
65#define MPP_MBH10302 1
66#define MPP_ANYFUNC 2
67#define MPP_SKIP_TO_CFE_10 4
68} fe_pccard_products[] = {
69 /* These need to be first */
70 { PCMCIA_CARD(FUJITSU2, FMV_J181), MPP_MBH10302 },
71 { PCMCIA_CARD(FUJITSU2, FMV_J182), 0 },
72 { PCMCIA_CARD(FUJITSU2, FMV_J182A), 0 },
73 { PCMCIA_CARD(FUJITSU2, ITCFJ182A), 0 },
74 /* These need to be second */
| 64 int mpp_flags;
65#define MPP_MBH10302 1
66#define MPP_ANYFUNC 2
67#define MPP_SKIP_TO_CFE_10 4
68} fe_pccard_products[] = {
69 /* These need to be first */
70 { PCMCIA_CARD(FUJITSU2, FMV_J181), MPP_MBH10302 },
71 { PCMCIA_CARD(FUJITSU2, FMV_J182), 0 },
72 { PCMCIA_CARD(FUJITSU2, FMV_J182A), 0 },
73 { PCMCIA_CARD(FUJITSU2, ITCFJ182A), 0 },
74 /* These need to be second */
|
75 { PCMCIA_CARD(TDK, LAK_CD021BX), 0 },
76 { PCMCIA_CARD(TDK, LAK_CF010), 0 },
| 75 { PCMCIA_CARD(TDK, LAK_CD021BX), 0 },
76 { PCMCIA_CARD(TDK, LAK_CF010), 0 },
|
77#if 0 /* XXX 86960-based? */
| 77#if 0 /* XXX 86960-based? */
|
78 { PCMCIA_CARD(TDK, LAK_DFL9610), 0 },
| 78 { PCMCIA_CARD(TDK, LAK_DFL9610), 0 },
|
79#endif
| 79#endif
|
80 { PCMCIA_CARD(CONTEC, CNETPC), 0 },
| 80 { PCMCIA_CARD(CONTEC, CNETPC), 0 },
|
81 { PCMCIA_CARD(FUJITSU, LA501), 0 },
82 { PCMCIA_CARD(FUJITSU, LA10S), 0 },
83 { PCMCIA_CARD(FUJITSU, NE200T), MPP_MBH10302 },/* Sold by Eagle */
84 { PCMCIA_CARD(HITACHI, HT_4840), MPP_MBH10302 | MPP_SKIP_TO_CFE_10},
85 { PCMCIA_CARD(RATOC, REX_R280), 0 },
86 { PCMCIA_CARD(XIRCOM, CE), MPP_ANYFUNC },
| 81 { PCMCIA_CARD(FUJITSU, LA501), 0 },
82 { PCMCIA_CARD(FUJITSU, LA10S), 0 },
83 { PCMCIA_CARD(FUJITSU, NE200T), MPP_MBH10302 },/* Sold by Eagle */
84 { PCMCIA_CARD(HITACHI, HT_4840), MPP_MBH10302 | MPP_SKIP_TO_CFE_10},
85 { PCMCIA_CARD(RATOC, REX_R280), 0 },
86 { PCMCIA_CARD(XIRCOM, CE), MPP_ANYFUNC },
|
87 { { NULL } }
| 87 { { NULL } }
|
88};
89
90static int
91fe_pccard_probe(device_t dev)
92{
93 int error;
94 uint32_t fcn = PCCARD_FUNCTION_UNSPEC;
| 88};
89
90static int
91fe_pccard_probe(device_t dev)
92{
93 int error;
94 uint32_t fcn = PCCARD_FUNCTION_UNSPEC;
|
95 const struct fe_pccard_product *pp;
| 95 const struct fe_pccard_product *pp;
|
96 int i;
97
| 96 int i;
97
|
98 if ((pp = (const struct fe_pccard_product *)pccard_product_lookup(dev,
99 (const struct pccard_product *)fe_pccard_products,
100 sizeof(fe_pccard_products[0]), NULL)) != NULL) {
| 98 if ((pp = (const struct fe_pccard_product *)pccard_product_lookup(dev,
99 (const struct pccard_product *)fe_pccard_products,
100 sizeof(fe_pccard_products[0]), NULL)) != NULL) {
|
101 if (pp->mpp_product.pp_name != NULL)
102 device_set_desc(dev, pp->mpp_product.pp_name);
103 if (pp->mpp_flags & MPP_ANYFUNC)
104 return (0);
105 /* Make sure we're a network function */
106 error = pccard_get_function(dev, &fcn);
107 if (error != 0)
108 return (error);
109 if (fcn != PCCARD_FUNCTION_NETWORK)
110 return (ENXIO);
111 if (pp->mpp_flags & MPP_SKIP_TO_CFE_10) {
112 for (i = 10; i < 27; i++) {
113 if (pccard_select_cfe(dev, i) == 0)
114 goto good;
115 }
116 device_printf(dev,
117 "Hitachi HT-4840-11 workaround failed\n");
118 return ENXIO;
119 }
120 good:;
121 return (0);
| 101 if (pp->mpp_product.pp_name != NULL)
102 device_set_desc(dev, pp->mpp_product.pp_name);
103 if (pp->mpp_flags & MPP_ANYFUNC)
104 return (0);
105 /* Make sure we're a network function */
106 error = pccard_get_function(dev, &fcn);
107 if (error != 0)
108 return (error);
109 if (fcn != PCCARD_FUNCTION_NETWORK)
110 return (ENXIO);
111 if (pp->mpp_flags & MPP_SKIP_TO_CFE_10) {
112 for (i = 10; i < 27; i++) {
113 if (pccard_select_cfe(dev, i) == 0)
114 goto good;
115 }
116 device_printf(dev,
117 "Hitachi HT-4840-11 workaround failed\n");
118 return ENXIO;
119 }
120 good:;
121 return (0);
|
122 }
123 return (ENXIO);
| 122 }
123 return (ENXIO);
|
124}
125
126static device_method_t fe_pccard_methods[] = {
| 124}
125
126static device_method_t fe_pccard_methods[] = {
|
127 /* Device interface */
128 DEVMETHOD(device_probe, fe_pccard_probe),
129 DEVMETHOD(device_attach, fe_pccard_attach),
130 DEVMETHOD(device_detach, fe_pccard_detach),
| 127 /* Device interface */
128 DEVMETHOD(device_probe, fe_pccard_probe),
129 DEVMETHOD(device_attach, fe_pccard_attach),
130 DEVMETHOD(device_detach, fe_pccard_detach),
|
131
132 { 0, 0 }
133};
134
135static driver_t fe_pccard_driver = {
136 "fe",
137 fe_pccard_methods,
138 sizeof (struct fe_softc)
139};
140
141DRIVER_MODULE(fe, pccard, fe_pccard_driver, fe_devclass, 0, 0);
142MODULE_DEPEND(fe, pccard, 1, 1, 1);
143
144static int fe_probe_mbh(device_t, const struct fe_pccard_product *);
145static int fe_probe_tdk(device_t, const struct fe_pccard_product *);
| 131
132 { 0, 0 }
133};
134
135static driver_t fe_pccard_driver = {
136 "fe",
137 fe_pccard_methods,
138 sizeof (struct fe_softc)
139};
140
141DRIVER_MODULE(fe, pccard, fe_pccard_driver, fe_devclass, 0, 0);
142MODULE_DEPEND(fe, pccard, 1, 1, 1);
143
144static int fe_probe_mbh(device_t, const struct fe_pccard_product *);
145static int fe_probe_tdk(device_t, const struct fe_pccard_product *);
|
146/*
147 * Initialize the device - called from Slot manager.
148 */
| 146
|
149static int
150fe_pccard_attach(device_t dev)
151{
152 struct fe_softc *sc;
| 147static int
148fe_pccard_attach(device_t dev)
149{
150 struct fe_softc *sc;
|
153 const struct fe_pccard_product *pp;
| 151 const struct fe_pccard_product *pp;
|
154 int error;
155
156 /* Prepare for the device probe process. */
157 sc = device_get_softc(dev);
158 sc->sc_unit = device_get_unit(dev);
159
| 152 int error;
153
154 /* Prepare for the device probe process. */
155 sc = device_get_softc(dev);
156 sc->sc_unit = device_get_unit(dev);
157
|
160 pp = (const struct fe_pccard_product *) pccard_product_lookup(dev,
| 158 pp = (const struct fe_pccard_product *) pccard_product_lookup(dev,
|
161 (const struct pccard_product *)fe_pccard_products,
| 159 (const struct pccard_product *)fe_pccard_products,
|
162 sizeof(fe_pccard_products[0]), NULL);
| 160 sizeof(fe_pccard_products[0]), NULL);
|
163 if (pp == NULL)
164 return (ENXIO);
165
166 if (pp->mpp_flags & MPP_MBH10302)
167 error = fe_probe_mbh(dev, pp);
168 else
169 error = fe_probe_tdk(dev, pp);
170 if (error != 0) {
171 fe_release_resource(dev);
172 return (error);
173 }
174 error = fe_alloc_irq(dev, 0);
175 if (error != 0) {
176 fe_release_resource(dev);
177 return (error);
178 }
179 return (fe_attach(dev));
180}
181
182/*
183 * feunload - unload the driver and clear the table.
184 */
185static int
186fe_pccard_detach(device_t dev)
187{
188 struct fe_softc *sc = device_get_softc(dev);
189 struct ifnet *ifp = sc->ifp;
190
191 FE_LOCK(sc);
192 fe_stop(sc);
193 FE_UNLOCK(sc);
194 callout_drain(&sc->timer);
195 ether_ifdetach(ifp);
196 bus_teardown_intr(dev, sc->irq_res, sc->irq_handle);
197 if_free(ifp);
198 fe_release_resource(dev);
199 mtx_destroy(&sc->lock);
200
201 return 0;
202}
203
204
205/*
206 * Probe and initialization for Fujitsu MBH10302 PCMCIA Ethernet interface.
207 * Note that this is for 10302 only; MBH10304 is handled by fe_probe_tdk().
208 */
209static void
210fe_init_mbh(struct fe_softc *sc)
211{
212 /* Minimal initialization of 86960. */
213 DELAY(200);
214 fe_outb(sc, FE_DLCR6, sc->proto_dlcr6 | FE_D6_DLC_DISABLE);
215 DELAY(200);
216
217 /* Disable all interrupts. */
218 fe_outb(sc, FE_DLCR2, 0);
219 fe_outb(sc, FE_DLCR3, 0);
220
221 /* Enable master interrupt flag. */
222 fe_outb(sc, FE_MBH0, FE_MBH0_MAGIC | FE_MBH0_INTR_ENABLE);
223}
224
225static int
226fe_probe_mbh(device_t dev, const struct fe_pccard_product *pp)
227{
228 struct fe_softc *sc = device_get_softc(dev);
229
230 static struct fe_simple_probe_struct probe_table [] = {
231 { FE_DLCR2, 0x58, 0x00 },
232 { FE_DLCR4, 0x08, 0x00 },
233 { FE_DLCR6, 0xFF, 0xB6 },
234 { 0 }
235 };
236
237 /* MBH10302 occupies 32 I/O addresses. */
238 if (fe_alloc_port(dev, 32))
239 return ENXIO;
240
241 /* Fill the softc struct with default values. */
242 fe_softc_defaults(sc);
243
244 /*
245 * See if MBH10302 is on its address.
246 * I'm not sure the following probe code works. FIXME.
247 */
248 if (!fe_simple_probe(sc, probe_table))
249 return ENXIO;
250
251 /* Get our station address from EEPROM. */
252 fe_inblk(sc, FE_MBH10, sc->enaddr, ETHER_ADDR_LEN);
253
254 /* Make sure we got a valid station address. */
255 if (!fe_valid_Ether_p(sc->enaddr, 0))
256 return ENXIO;
257
258 /* Determine the card type. */
259 sc->type = FE_TYPE_MBH;
260 sc->typestr = "MBH10302 (PCMCIA)";
261
262 /* We seems to need our own IDENT bits... FIXME. */
263 sc->proto_dlcr7 = FE_D7_BYTSWP_LH | FE_D7_IDENT_NICE;
264
265 /* Setup hooks. We need a special initialization procedure. */
266 sc->init = fe_init_mbh;
267
268 return 0;
269}
270
271static int
| 161 if (pp == NULL)
162 return (ENXIO);
163
164 if (pp->mpp_flags & MPP_MBH10302)
165 error = fe_probe_mbh(dev, pp);
166 else
167 error = fe_probe_tdk(dev, pp);
168 if (error != 0) {
169 fe_release_resource(dev);
170 return (error);
171 }
172 error = fe_alloc_irq(dev, 0);
173 if (error != 0) {
174 fe_release_resource(dev);
175 return (error);
176 }
177 return (fe_attach(dev));
178}
179
180/*
181 * feunload - unload the driver and clear the table.
182 */
183static int
184fe_pccard_detach(device_t dev)
185{
186 struct fe_softc *sc = device_get_softc(dev);
187 struct ifnet *ifp = sc->ifp;
188
189 FE_LOCK(sc);
190 fe_stop(sc);
191 FE_UNLOCK(sc);
192 callout_drain(&sc->timer);
193 ether_ifdetach(ifp);
194 bus_teardown_intr(dev, sc->irq_res, sc->irq_handle);
195 if_free(ifp);
196 fe_release_resource(dev);
197 mtx_destroy(&sc->lock);
198
199 return 0;
200}
201
202
203/*
204 * Probe and initialization for Fujitsu MBH10302 PCMCIA Ethernet interface.
205 * Note that this is for 10302 only; MBH10304 is handled by fe_probe_tdk().
206 */
207static void
208fe_init_mbh(struct fe_softc *sc)
209{
210 /* Minimal initialization of 86960. */
211 DELAY(200);
212 fe_outb(sc, FE_DLCR6, sc->proto_dlcr6 | FE_D6_DLC_DISABLE);
213 DELAY(200);
214
215 /* Disable all interrupts. */
216 fe_outb(sc, FE_DLCR2, 0);
217 fe_outb(sc, FE_DLCR3, 0);
218
219 /* Enable master interrupt flag. */
220 fe_outb(sc, FE_MBH0, FE_MBH0_MAGIC | FE_MBH0_INTR_ENABLE);
221}
222
223static int
224fe_probe_mbh(device_t dev, const struct fe_pccard_product *pp)
225{
226 struct fe_softc *sc = device_get_softc(dev);
227
228 static struct fe_simple_probe_struct probe_table [] = {
229 { FE_DLCR2, 0x58, 0x00 },
230 { FE_DLCR4, 0x08, 0x00 },
231 { FE_DLCR6, 0xFF, 0xB6 },
232 { 0 }
233 };
234
235 /* MBH10302 occupies 32 I/O addresses. */
236 if (fe_alloc_port(dev, 32))
237 return ENXIO;
238
239 /* Fill the softc struct with default values. */
240 fe_softc_defaults(sc);
241
242 /*
243 * See if MBH10302 is on its address.
244 * I'm not sure the following probe code works. FIXME.
245 */
246 if (!fe_simple_probe(sc, probe_table))
247 return ENXIO;
248
249 /* Get our station address from EEPROM. */
250 fe_inblk(sc, FE_MBH10, sc->enaddr, ETHER_ADDR_LEN);
251
252 /* Make sure we got a valid station address. */
253 if (!fe_valid_Ether_p(sc->enaddr, 0))
254 return ENXIO;
255
256 /* Determine the card type. */
257 sc->type = FE_TYPE_MBH;
258 sc->typestr = "MBH10302 (PCMCIA)";
259
260 /* We seems to need our own IDENT bits... FIXME. */
261 sc->proto_dlcr7 = FE_D7_BYTSWP_LH | FE_D7_IDENT_NICE;
262
263 /* Setup hooks. We need a special initialization procedure. */
264 sc->init = fe_init_mbh;
265
266 return 0;
267}
268
269static int
|
272sn_pccard_xircom_mac(const struct pccard_tuple *tuple, void *argp)
| 270fe_pccard_xircom_mac(const struct pccard_tuple *tuple, void *argp)
|
273{
274 uint8_t *enaddr = argp;
275 int i;
276
277#if 1
278 /*
279 * We fail to map the CIS twice, for reasons unknown. We
280 * may fix this in the future by loading the CIS with a sane
281 * CIS from userland.
282 */
283 static uint8_t defaultmac[ETHER_ADDR_LEN] = {
284 0x00, 0x80, 0xc7, 0xed, 0x16, 0x7b};
285
286 /* Copy the MAC ADDR and return success */
287 for (i = 0; i < ETHER_ADDR_LEN; i++)
288 enaddr[i] = defaultmac[i];
289#else
290 /* FUNCE is not after FUNCID, so we gotta go find it */
291 if (tuple->code != 0x22)
292 return (0);
293
294 /* Make sure this is a sane node */
295 if (tuple->length < ETHER_ADDR_LEN + 3)
296 return (0);
297
298 /* Copy the MAC ADDR and return success */
299 for (i = 0; i < ETHER_ADDR_LEN; i++)
300 enaddr[i] = pccard_tuple_read_1(tuple, i + 3);
301#endif
302 return (1);
303}
304
305/*
306 * Probe and initialization for TDK/CONTEC PCMCIA Ethernet interface.
307 * by MASUI Kenji <masui@cs.titech.ac.jp>
308 *
309 * (Contec uses TDK Ethenet chip -- hosokawa)
310 *
311 * This version of fe_probe_tdk has been rewrote to handle
312 * *generic* PC Card implementation of Fujitsu MB8696x family. The
313 * name _tdk is just for a historical reason. :-)
314 */
315static int
316fe_probe_tdk (device_t dev, const struct fe_pccard_product *pp)
317{
318 struct fe_softc *sc = device_get_softc(dev);
319
| 271{
272 uint8_t *enaddr = argp;
273 int i;
274
275#if 1
276 /*
277 * We fail to map the CIS twice, for reasons unknown. We
278 * may fix this in the future by loading the CIS with a sane
279 * CIS from userland.
280 */
281 static uint8_t defaultmac[ETHER_ADDR_LEN] = {
282 0x00, 0x80, 0xc7, 0xed, 0x16, 0x7b};
283
284 /* Copy the MAC ADDR and return success */
285 for (i = 0; i < ETHER_ADDR_LEN; i++)
286 enaddr[i] = defaultmac[i];
287#else
288 /* FUNCE is not after FUNCID, so we gotta go find it */
289 if (tuple->code != 0x22)
290 return (0);
291
292 /* Make sure this is a sane node */
293 if (tuple->length < ETHER_ADDR_LEN + 3)
294 return (0);
295
296 /* Copy the MAC ADDR and return success */
297 for (i = 0; i < ETHER_ADDR_LEN; i++)
298 enaddr[i] = pccard_tuple_read_1(tuple, i + 3);
299#endif
300 return (1);
301}
302
303/*
304 * Probe and initialization for TDK/CONTEC PCMCIA Ethernet interface.
305 * by MASUI Kenji <masui@cs.titech.ac.jp>
306 *
307 * (Contec uses TDK Ethenet chip -- hosokawa)
308 *
309 * This version of fe_probe_tdk has been rewrote to handle
310 * *generic* PC Card implementation of Fujitsu MB8696x family. The
311 * name _tdk is just for a historical reason. :-)
312 */
313static int
314fe_probe_tdk (device_t dev, const struct fe_pccard_product *pp)
315{
316 struct fe_softc *sc = device_get_softc(dev);
317
|
320 static struct fe_simple_probe_struct probe_table [] = {
321 { FE_DLCR2, 0x10, 0x00 },
322 { FE_DLCR4, 0x08, 0x00 },
323 /* { FE_DLCR5, 0x80, 0x00 }, Does not work well. */
324 { 0 }
325 };
| 318 static struct fe_simple_probe_struct probe_table [] = {
319 { FE_DLCR2, 0x10, 0x00 },
320 { FE_DLCR4, 0x08, 0x00 },
321/* { FE_DLCR5, 0x80, 0x00 }, Does not work well. */
322 { 0 }
323 };
|
326
327
| 324
325
|
328 /* C-NET(PC)C occupies 16 I/O addresses. */
| 326 /* C-NET(PC)C occupies 16 I/O addresses. */
|
329 if (fe_alloc_port(dev, 16))
330 return ENXIO;
331
332 /* Fill the softc struct with default values. */
333 fe_softc_defaults(sc);
334
| 327 if (fe_alloc_port(dev, 16))
328 return ENXIO;
329
330 /* Fill the softc struct with default values. */
331 fe_softc_defaults(sc);
332
|
335 /*
336 * See if C-NET(PC)C is on its address.
337 */
338 if (!fe_simple_probe(sc, probe_table))
| 333 /*
334 * See if C-NET(PC)C is on its address.
335 */
336 if (!fe_simple_probe(sc, probe_table))
|
339 return ENXIO;
340
| 337 return ENXIO;
338
|
341 /* Determine the card type. */
| 339 /* Determine the card type. */
|
342 sc->type = FE_TYPE_TDK;
| 340 sc->type = FE_TYPE_TDK;
|
343 sc->typestr = "Generic MB8696x/78Q837x Ethernet (PCMCIA)";
| 341 sc->typestr = "Generic MB8696x/78Q837x Ethernet (PCMCIA)";
|
344
345 pccard_get_ether(dev, sc->enaddr);
346
| 342
343 pccard_get_ether(dev, sc->enaddr);
344
|
347 /* Make sure we got a valid station address. */
348 if (!fe_valid_Ether_p(sc->enaddr, 0)) {
349 pccard_cis_scan(dev, sn_pccard_xircom_mac, sc->enaddr);
| 345 /* Make sure we got a valid station address. */
346 if (!fe_valid_Ether_p(sc->enaddr, 0)) {
347 pccard_cis_scan(dev, fe_pccard_xircom_mac, sc->enaddr);
|
350 }
351
| 348 }
349
|
352 /* Make sure we got a valid station address. */
353 if (!fe_valid_Ether_p(sc->enaddr, 0))
| 350 /* Make sure we got a valid station address. */
351 if (!fe_valid_Ether_p(sc->enaddr, 0))
|
354 return ENXIO;
355
| 352 return ENXIO;
353
|
356 return 0;
| 354 return 0;
|
357}
| 355}
|