1/* 2 * Copyright (c) 1997 by Simon Shapiro 3 * All Rights Reserved 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions, and the following disclaimer, 10 * without modification, immediately at the beginning of the file. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 3. The name of the author may not be used to endorse or promote products 15 * derived from this software without specific prior written permission. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 20 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR 21 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 27 * SUCH DAMAGE. 28 */ 29 30/* 31 * dpt_scsi.c: SCSI dependant code for the DPT driver 32 * 33 * credits: Assisted by Mike Neuffer in the early low level DPT code 34 * Thanx to Mark Salyzyn of DPT for his assistance. 35 * Special thanx to Justin Gibbs for invaluable help in 36 * making this driver look and work like a FreeBSD component. 37 * Last but not least, many thanx to UCB and the FreeBSD 38 * team for creating and maintaining such a wonderful O/S. 39 * 40 * TODO: * Add ISA probe code. 41 * * Add driver-level RAID-0. This will allow interoperability with 42 * NiceTry, M$-Doze, Win-Dog, Slowlaris, etc., in recognizing RAID 43 * arrays that span controllers (Wow!). 44 */ 45
|
46#ident "$Id: dpt_scsi.c,v 1.22 1998/12/22 20:21:12 eivind Exp $"
|
46#ident "$Id: dpt_scsi.c,v 1.23 1999/05/06 20:16:22 ken Exp $" |
47 48#define _DPT_C_ 49 50#include "opt_dpt.h" 51#include <sys/param.h> 52#include <sys/systm.h> 53#include <sys/malloc.h> 54#include <sys/buf.h> 55#include <sys/kernel.h> 56 57#include <stddef.h> /* For offsetof */ 58 59#include <machine/bus_memio.h> 60#include <machine/bus_pio.h> 61#include <machine/bus.h> 62#include <machine/clock.h> 63 64#include <cam/cam.h> 65#include <cam/cam_ccb.h> 66#include <cam/cam_sim.h> 67#include <cam/cam_xpt_sim.h> 68#include <cam/cam_debug.h> 69#include <cam/scsi/scsi_all.h> 70#include <cam/scsi/scsi_message.h> 71 72#include <vm/vm.h> 73#include <vm/pmap.h> 74 75#include <dev/dpt/dpt.h> 76 77/* dpt_isa.c, dpt_eisa.c, and dpt_pci.c need this in a central place */ 78int dpt_controllers_present; 79 80u_long dpt_unit; /* Next unit number to use */ 81 82/* The linked list of softc structures */ 83struct dpt_softc_list dpt_softcs = TAILQ_HEAD_INITIALIZER(dpt_softcs); 84 85#define microtime_now dpt_time_now() 86 87#define dpt_inl(dpt, port) \ 88 bus_space_read_4((dpt)->tag, (dpt)->bsh, port) 89#define dpt_inb(dpt, port) \ 90 bus_space_read_1((dpt)->tag, (dpt)->bsh, port) 91#define dpt_outl(dpt, port, value) \ 92 bus_space_write_4((dpt)->tag, (dpt)->bsh, port, value) 93#define dpt_outb(dpt, port, value) \ 94 bus_space_write_1((dpt)->tag, (dpt)->bsh, port, value) 95 96/* 97 * These will have to be setup by parameters passed at boot/load time. For 98 * perfromance reasons, we make them constants for the time being. 99 */ 100#define dpt_min_segs DPT_MAX_SEGS 101#define dpt_max_segs DPT_MAX_SEGS 102 103/* Definitions for our use of the SIM private CCB area */ 104#define ccb_dccb_ptr spriv_ptr0 105#define ccb_dpt_ptr spriv_ptr1 106 107/* ================= Private Inline Function declarations ===================*/ 108static __inline int dpt_just_reset(dpt_softc_t * dpt); 109static __inline int dpt_raid_busy(dpt_softc_t * dpt); 110static __inline int dpt_wait(dpt_softc_t *dpt, u_int bits, 111 u_int state); 112static __inline struct dpt_ccb* dptgetccb(struct dpt_softc *dpt); 113static __inline void dptfreeccb(struct dpt_softc *dpt, 114 struct dpt_ccb *dccb); 115static __inline u_int32_t dptccbvtop(struct dpt_softc *dpt, 116 struct dpt_ccb *dccb); 117 118static __inline int dpt_send_immediate(dpt_softc_t *dpt, 119 eata_ccb_t *cmd_block, 120 u_int32_t cmd_busaddr, 121 u_int retries, 122 u_int ifc, u_int code, 123 u_int code2); 124 125/* ==================== Private Function declarations =======================*/ 126static void dptmapmem(void *arg, bus_dma_segment_t *segs, 127 int nseg, int error); 128 129static struct sg_map_node* 130 dptallocsgmap(struct dpt_softc *dpt); 131 132static int dptallocccbs(dpt_softc_t *dpt); 133 134static int dpt_get_conf(dpt_softc_t *dpt, dpt_ccb_t *dccb, 135 u_int32_t dccb_busaddr, u_int size, 136 u_int page, u_int target, int extent); 137static void dpt_detect_cache(dpt_softc_t *dpt, dpt_ccb_t *dccb, 138 u_int32_t dccb_busaddr, 139 u_int8_t *buff); 140 141static void dpt_poll(struct cam_sim *sim); 142 143static void dptexecuteccb(void *arg, bus_dma_segment_t *dm_segs, 144 int nseg, int error); 145 146static void dpt_action(struct cam_sim *sim, union ccb *ccb); 147 148static int dpt_send_eata_command(dpt_softc_t *dpt, eata_ccb_t *cmd, 149 u_int32_t cmd_busaddr, 150 u_int command, u_int retries, 151 u_int ifc, u_int code, 152 u_int code2); 153static void dptprocesserror(dpt_softc_t *dpt, dpt_ccb_t *dccb, 154 union ccb *ccb, u_int hba_stat, 155 u_int scsi_stat, u_int32_t resid); 156 157static void dpttimeout(void *arg); 158static void dptshutdown(int howto, void *arg); 159 160/* ================= Private Inline Function definitions ====================*/ 161static __inline int 162dpt_just_reset(dpt_softc_t * dpt) 163{ 164 if ((dpt_inb(dpt, 2) == 'D') 165 && (dpt_inb(dpt, 3) == 'P') 166 && (dpt_inb(dpt, 4) == 'T') 167 && (dpt_inb(dpt, 5) == 'H')) 168 return (1); 169 else 170 return (0); 171} 172 173static __inline int 174dpt_raid_busy(dpt_softc_t * dpt) 175{ 176 if ((dpt_inb(dpt, 0) == 'D') 177 && (dpt_inb(dpt, 1) == 'P') 178 && (dpt_inb(dpt, 2) == 'T')) 179 return (1); 180 else 181 return (0); 182} 183 184static __inline int 185dpt_wait(dpt_softc_t *dpt, u_int bits, u_int state) 186{ 187 int i; 188 u_int c; 189 190 for (i = 0; i < 20000; i++) { /* wait 20ms for not busy */ 191 c = dpt_inb(dpt, HA_RSTATUS) & bits; 192 if (c == state) 193 return (0); 194 else 195 DELAY(50); 196 } 197 return (-1); 198} 199 200static __inline struct dpt_ccb* 201dptgetccb(struct dpt_softc *dpt) 202{ 203 struct dpt_ccb* dccb; 204 int s; 205 206 s = splcam(); 207 if ((dccb = SLIST_FIRST(&dpt->free_dccb_list)) != NULL) { 208 SLIST_REMOVE_HEAD(&dpt->free_dccb_list, links); 209 dpt->free_dccbs--; 210 } else if (dpt->total_dccbs < dpt->max_dccbs) { 211 dptallocccbs(dpt); 212 dccb = SLIST_FIRST(&dpt->free_dccb_list); 213 if (dccb == NULL) 214 printf("dpt%d: Can't malloc DCCB\n", dpt->unit); 215 else { 216 SLIST_REMOVE_HEAD(&dpt->free_dccb_list, links); 217 dpt->free_dccbs--; 218 } 219 } 220 splx(s); 221 222 return (dccb); 223} 224 225static __inline void 226dptfreeccb(struct dpt_softc *dpt, struct dpt_ccb *dccb) 227{ 228 int s; 229 230 s = splcam(); 231 if ((dccb->state & DCCB_ACTIVE) != 0) 232 LIST_REMOVE(&dccb->ccb->ccb_h, sim_links.le); 233 if ((dccb->state & DCCB_RELEASE_SIMQ) != 0) 234 dccb->ccb->ccb_h.status |= CAM_RELEASE_SIMQ; 235 else if (dpt->resource_shortage != 0 236 && (dccb->ccb->ccb_h.status & CAM_RELEASE_SIMQ) == 0) { 237 dccb->ccb->ccb_h.status |= CAM_RELEASE_SIMQ; 238 dpt->resource_shortage = FALSE; 239 } 240 dccb->state = DCCB_FREE; 241 SLIST_INSERT_HEAD(&dpt->free_dccb_list, dccb, links); 242 ++dpt->free_dccbs; 243 splx(s); 244} 245 246static __inline u_int32_t 247dptccbvtop(struct dpt_softc *dpt, struct dpt_ccb *dccb) 248{ 249 return (dpt->dpt_ccb_busbase 250 + (u_int32_t)((caddr_t)dccb - (caddr_t)dpt->dpt_dccbs)); 251} 252 253static __inline struct dpt_ccb * 254dptccbptov(struct dpt_softc *dpt, u_int32_t busaddr) 255{ 256 return (dpt->dpt_dccbs 257 + ((struct dpt_ccb *)busaddr 258 - (struct dpt_ccb *)dpt->dpt_ccb_busbase)); 259} 260 261/* 262 * Send a command for immediate execution by the DPT 263 * See above function for IMPORTANT notes. 264 */ 265static __inline int 266dpt_send_immediate(dpt_softc_t *dpt, eata_ccb_t *cmd_block, 267 u_int32_t cmd_busaddr, u_int retries, 268 u_int ifc, u_int code, u_int code2) 269{ 270 return (dpt_send_eata_command(dpt, cmd_block, cmd_busaddr, 271 EATA_CMD_IMMEDIATE, retries, ifc, 272 code, code2)); 273} 274 275 276/* ===================== Private Function definitions =======================*/ 277static void 278dptmapmem(void *arg, bus_dma_segment_t *segs, int nseg, int error) 279{ 280 bus_addr_t *busaddrp; 281 282 busaddrp = (bus_addr_t *)arg; 283 *busaddrp = segs->ds_addr; 284} 285 286static struct sg_map_node * 287dptallocsgmap(struct dpt_softc *dpt) 288{ 289 struct sg_map_node *sg_map; 290 291 sg_map = malloc(sizeof(*sg_map), M_DEVBUF, M_NOWAIT); 292 293 if (sg_map == NULL) 294 return (NULL); 295 296 /* Allocate S/G space for the next batch of CCBS */ 297 if (bus_dmamem_alloc(dpt->sg_dmat, (void **)&sg_map->sg_vaddr, 298 BUS_DMA_NOWAIT, &sg_map->sg_dmamap) != 0) { 299 free(sg_map, M_DEVBUF); 300 return (NULL); 301 } 302 303 (void)bus_dmamap_load(dpt->sg_dmat, sg_map->sg_dmamap, sg_map->sg_vaddr, 304 PAGE_SIZE, dptmapmem, &sg_map->sg_physaddr, 305 /*flags*/0); 306 307 SLIST_INSERT_HEAD(&dpt->sg_maps, sg_map, links); 308 309 return (sg_map); 310} 311 312/* 313 * Allocate another chunk of CCB's. Return count of entries added. 314 * Assumed to be called at splcam(). 315 */ 316static int 317dptallocccbs(dpt_softc_t *dpt) 318{ 319 struct dpt_ccb *next_ccb; 320 struct sg_map_node *sg_map; 321 bus_addr_t physaddr; 322 dpt_sg_t *segs; 323 int newcount; 324 int i; 325 326 next_ccb = &dpt->dpt_dccbs[dpt->total_dccbs]; 327 328 if (next_ccb == dpt->dpt_dccbs) { 329 /* 330 * First time through. Re-use the S/G 331 * space we allocated for initialization 332 * CCBS. 333 */ 334 sg_map = SLIST_FIRST(&dpt->sg_maps); 335 } else { 336 sg_map = dptallocsgmap(dpt); 337 } 338 339 if (sg_map == NULL) 340 return (0); 341 342 segs = sg_map->sg_vaddr; 343 physaddr = sg_map->sg_physaddr; 344 345 newcount = (PAGE_SIZE / (dpt->sgsize * sizeof(dpt_sg_t))); 346 for (i = 0; dpt->total_dccbs < dpt->max_dccbs && i < newcount; i++) { 347 int error; 348 349 error = bus_dmamap_create(dpt->buffer_dmat, /*flags*/0, 350 &next_ccb->dmamap); 351 if (error != 0) 352 break; 353 next_ccb->sg_list = segs; 354 next_ccb->sg_busaddr = htonl(physaddr); 355 next_ccb->eata_ccb.cp_dataDMA = htonl(physaddr); 356 next_ccb->eata_ccb.cp_statDMA = htonl(dpt->sp_physaddr); 357 next_ccb->eata_ccb.cp_reqDMA = 358 htonl(dptccbvtop(dpt, next_ccb) 359 + offsetof(struct dpt_ccb, sense_data)); 360 next_ccb->eata_ccb.cp_busaddr = dpt->dpt_ccb_busend; 361 next_ccb->state = DCCB_FREE; 362 next_ccb->tag = dpt->total_dccbs; 363 SLIST_INSERT_HEAD(&dpt->free_dccb_list, next_ccb, links); 364 segs += dpt->sgsize; 365 physaddr += (dpt->sgsize * sizeof(dpt_sg_t)); 366 dpt->dpt_ccb_busend += sizeof(*next_ccb); 367 next_ccb++; 368 dpt->total_dccbs++; 369 } 370 return (i); 371} 372 373/* 374 * Read a configuration page into the supplied dpt_cont_t buffer. 375 */ 376static int 377dpt_get_conf(dpt_softc_t *dpt, dpt_ccb_t *dccb, u_int32_t dccb_busaddr, 378 u_int size, u_int page, u_int target, int extent) 379{ 380 eata_ccb_t *cp; 381 382 u_int8_t status; 383 384 int ndx; 385 int ospl; 386 int result; 387 388 cp = &dccb->eata_ccb; 389 bzero((void *)dpt->sp, sizeof(*dpt->sp)); 390 391 cp->Interpret = 1; 392 cp->DataIn = 1; 393 cp->Auto_Req_Sen = 1; 394 cp->reqlen = sizeof(struct scsi_sense_data); 395 396 cp->cp_id = target; 397 cp->cp_LUN = 0; /* In the EATA packet */ 398 cp->cp_lun = 0; /* In the SCSI command */ 399 400 cp->cp_scsi_cmd = INQUIRY; 401 cp->cp_len = size; 402 403 cp->cp_extent = extent; 404 405 cp->cp_page = page; 406 cp->cp_channel = 0; /* DNC, Interpret mode is set */ 407 cp->cp_identify = 1; 408 cp->cp_datalen = htonl(size); 409 410 ospl = splcam(); 411 412 /* 413 * This could be a simple for loop, but we suspected the compiler To 414 * have optimized it a bit too much. Wait for the controller to 415 * become ready 416 */ 417 while (((status = dpt_inb(dpt, HA_RSTATUS)) != (HA_SREADY | HA_SSC) 418 && (status != (HA_SREADY | HA_SSC | HA_SERROR)) 419 && (status != (HA_SDRDY | HA_SERROR | HA_SDRQ))) 420 || (dpt_wait(dpt, HA_SBUSY, 0))) { 421 422 /* 423 * RAID Drives still Spinning up? (This should only occur if 424 * the DPT controller is in a NON PC (PCI?) platform). 425 */ 426 if (dpt_raid_busy(dpt)) { 427 printf("dpt%d WARNING: Get_conf() RSUS failed.\n", 428 dpt->unit); 429 splx(ospl); 430 return (0); 431 } 432 } 433 434 DptStat_Reset_BUSY(dpt->sp); 435 436 /* 437 * XXXX We might want to do something more clever than aborting at 438 * this point, like resetting (rebooting) the controller and trying 439 * again. 440 */ 441 if ((result = dpt_send_eata_command(dpt, cp, dccb_busaddr, 442 EATA_CMD_DMA_SEND_CP, 443 10000, 0, 0, 0)) != 0) { 444 printf("dpt%d WARNING: Get_conf() failed (%d) to send " 445 "EATA_CMD_DMA_READ_CONFIG\n", 446 dpt->unit, result); 447 splx(ospl); 448 return (0); 449 } 450 /* Wait for two seconds for a response. This can be slow */ 451 for (ndx = 0; 452 (ndx < 20000) 453 && !((status = dpt_inb(dpt, HA_RAUXSTAT)) & HA_AIRQ); 454 ndx++) { 455 DELAY(50); 456 } 457 458 /* Grab the status and clear interrupts */ 459 status = dpt_inb(dpt, HA_RSTATUS); 460 461 splx(ospl); 462 463 /* 464 * Check the status carefully. Return only if the 465 * command was successful. 466 */ 467 if (((status & HA_SERROR) == 0) 468 && (dpt->sp->hba_stat == 0) 469 && (dpt->sp->scsi_stat == 0) 470 && (dpt->sp->residue_len == 0)) 471 return (0); 472 return (1); 473} 474 475/* Detect Cache parameters and size */ 476static void 477dpt_detect_cache(dpt_softc_t *dpt, dpt_ccb_t *dccb, u_int32_t dccb_busaddr, 478 u_int8_t *buff) 479{ 480 eata_ccb_t *cp; 481 u_int8_t *param; 482 int bytes; 483 int result; 484 int ospl; 485 int ndx; 486 u_int8_t status; 487 488 /* 489 * Default setting, for best perfromance.. 490 * This is what virtually all cards default to.. 491 */ 492 dpt->cache_type = DPT_CACHE_WRITEBACK; 493 dpt->cache_size = 0; 494 495 cp = &dccb->eata_ccb; 496 bzero((void *)dpt->sp, sizeof(dpt->sp)); 497 bzero(buff, 512); 498 499 /* Setup the command structure */ 500 cp->Interpret = 1; 501 cp->DataIn = 1; 502 cp->Auto_Req_Sen = 1; 503 cp->reqlen = sizeof(struct scsi_sense_data); 504 505 cp->cp_id = 0; /* who cares? The HBA will interpret.. */ 506 cp->cp_LUN = 0; /* In the EATA packet */ 507 cp->cp_lun = 0; /* In the SCSI command */ 508 cp->cp_channel = 0; 509 510 cp->cp_scsi_cmd = EATA_CMD_DMA_SEND_CP; 511 cp->cp_len = 56; 512 513 cp->cp_extent = 0; 514 cp->cp_page = 0; 515 cp->cp_identify = 1; 516 cp->cp_dispri = 1; 517 518 /* 519 * Build the EATA Command Packet structure 520 * for a Log Sense Command. 521 */ 522 cp->cp_cdb[0] = 0x4d; 523 cp->cp_cdb[1] = 0x0; 524 cp->cp_cdb[2] = 0x40 | 0x33; 525 cp->cp_cdb[7] = 1; 526 527 cp->cp_datalen = htonl(512); 528 529 ospl = splcam(); 530 result = dpt_send_eata_command(dpt, cp, dccb_busaddr, 531 EATA_CMD_DMA_SEND_CP, 532 10000, 0, 0, 0); 533 if (result != 0) { 534 printf("dpt%d WARNING: detect_cache() failed (%d) to send " 535 "EATA_CMD_DMA_SEND_CP\n", dpt->unit, result); 536 splx(ospl); 537 return; 538 } 539 /* Wait for two seconds for a response. This can be slow... */ 540 for (ndx = 0; 541 (ndx < 20000) && 542 !((status = dpt_inb(dpt, HA_RAUXSTAT)) & HA_AIRQ); 543 ndx++) { 544 DELAY(50); 545 } 546 547 /* Grab the status and clear interrupts */ 548 status = dpt_inb(dpt, HA_RSTATUS); 549 splx(ospl); 550 551 /* 552 * Sanity check 553 */ 554 if (buff[0] != 0x33) { 555 return; 556 } 557 bytes = DPT_HCP_LENGTH(buff); 558 param = DPT_HCP_FIRST(buff); 559 560 if (DPT_HCP_CODE(param) != 1) { 561 /* 562 * DPT Log Page layout error 563 */ 564 printf("dpt%d: NOTICE: Log Page (1) layout error\n", 565 dpt->unit); 566 return; 567 } 568 if (!(param[4] & 0x4)) { 569 dpt->cache_type = DPT_NO_CACHE; 570 return; 571 } 572 while (DPT_HCP_CODE(param) != 6) { 573 param = DPT_HCP_NEXT(param); 574 if ((param < buff) 575 || (param >= &buff[bytes])) { 576 return; 577 } 578 } 579 580 if (param[4] & 0x2) { 581 /* 582 * Cache disabled 583 */ 584 dpt->cache_type = DPT_NO_CACHE; 585 return; 586 } 587 588 if (param[4] & 0x4) { 589 dpt->cache_type = DPT_CACHE_WRITETHROUGH; 590 } 591 592 /* XXX This isn't correct. This log parameter only has two bytes.... */ 593#if 0 594 dpt->cache_size = param[5] 595 | (param[6] << 8) 596 | (param[7] << 16) 597 | (param[8] << 24); 598#endif 599} 600 601static void 602dpt_poll(struct cam_sim *sim) 603{ 604 dpt_intr(cam_sim_softc(sim)); 605} 606 607static void 608dptexecuteccb(void *arg, bus_dma_segment_t *dm_segs, int nseg, int error) 609{ 610 struct dpt_ccb *dccb; 611 union ccb *ccb; 612 struct dpt_softc *dpt; 613 int s; 614 615 dccb = (struct dpt_ccb *)arg; 616 ccb = dccb->ccb; 617 dpt = (struct dpt_softc *)ccb->ccb_h.ccb_dpt_ptr; 618 619 if (error != 0) { 620 if (error != EFBIG) 621 printf("dpt%d: Unexepected error 0x%x returned from " 622 "bus_dmamap_load\n", dpt->unit, error); 623 if (ccb->ccb_h.status == CAM_REQ_INPROG) { 624 xpt_freeze_devq(ccb->ccb_h.path, /*count*/1); 625 ccb->ccb_h.status = CAM_REQ_TOO_BIG|CAM_DEV_QFRZN; 626 } 627 dptfreeccb(dpt, dccb); 628 xpt_done(ccb); 629 return; 630 } 631 632 if (nseg != 0) { 633 dpt_sg_t *sg; 634 bus_dma_segment_t *end_seg; 635 bus_dmasync_op_t op; 636 637 end_seg = dm_segs + nseg; 638 639 /* Copy the segments into our SG list */ 640 sg = dccb->sg_list; 641 while (dm_segs < end_seg) { 642 sg->seg_len = htonl(dm_segs->ds_len); 643 sg->seg_addr = htonl(dm_segs->ds_addr); 644 sg++; 645 dm_segs++; 646 } 647 648 if (nseg > 1) { 649 dccb->eata_ccb.scatter = 1; 650 dccb->eata_ccb.cp_dataDMA = dccb->sg_busaddr; 651 dccb->eata_ccb.cp_datalen = 652 htonl(nseg * sizeof(dpt_sg_t)); 653 } else { 654 dccb->eata_ccb.cp_dataDMA = dccb->sg_list[0].seg_addr; 655 dccb->eata_ccb.cp_datalen = dccb->sg_list[0].seg_len; 656 } 657 658 if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) 659 op = BUS_DMASYNC_PREREAD; 660 else 661 op = BUS_DMASYNC_PREWRITE; 662 663 bus_dmamap_sync(dpt->buffer_dmat, dccb->dmamap, op); 664 665 } else { 666 dccb->eata_ccb.cp_dataDMA = 0; 667 dccb->eata_ccb.cp_datalen = 0; 668 } 669 670 s = splcam(); 671 672 /* 673 * Last time we need to check if this CCB needs to 674 * be aborted. 675 */ 676 if (ccb->ccb_h.status != CAM_REQ_INPROG) { 677 if (nseg != 0) 678 bus_dmamap_unload(dpt->buffer_dmat, dccb->dmamap); 679 dptfreeccb(dpt, dccb); 680 xpt_done(ccb); 681 splx(s); 682 return; 683 } 684 685 dccb->state |= DCCB_ACTIVE; 686 ccb->ccb_h.status |= CAM_SIM_QUEUED; 687 LIST_INSERT_HEAD(&dpt->pending_ccb_list, &ccb->ccb_h, sim_links.le); 688 ccb->ccb_h.timeout_ch = 689 timeout(dpttimeout, (caddr_t)dccb, 690 (ccb->ccb_h.timeout * hz) / 1000); 691 if (dpt_send_eata_command(dpt, &dccb->eata_ccb, 692 dccb->eata_ccb.cp_busaddr, 693 EATA_CMD_DMA_SEND_CP, 0, 0, 0, 0) != 0) { 694 ccb->ccb_h.status = CAM_NO_HBA; /* HBA dead or just busy?? */ 695 if (nseg != 0) 696 bus_dmamap_unload(dpt->buffer_dmat, dccb->dmamap); 697 dptfreeccb(dpt, dccb); 698 xpt_done(ccb); 699 } 700 701 splx(s); 702} 703 704static void 705dpt_action(struct cam_sim *sim, union ccb *ccb) 706{ 707 struct dpt_softc *dpt; 708 709 CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_TRACE, ("dpt_action\n")); 710 711 dpt = (struct dpt_softc *)cam_sim_softc(sim); 712 713 if ((dpt->state & DPT_HA_SHUTDOWN_ACTIVE) != 0) { 714 xpt_print_path(ccb->ccb_h.path); 715 printf("controller is shutdown. Aborting CCB.\n"); 716 ccb->ccb_h.status = CAM_NO_HBA; 717 xpt_done(ccb); 718 return; 719 } 720 721 switch (ccb->ccb_h.func_code) { 722 /* Common cases first */ 723 case XPT_SCSI_IO: /* Execute the requested I/O operation */ 724 { 725 struct ccb_scsiio *csio; 726 struct ccb_hdr *ccbh; 727 struct dpt_ccb *dccb; 728 struct eata_ccb *eccb; 729 730 csio = &ccb->csio; 731 ccbh = &ccb->ccb_h; 732 /* Max CDB length is 12 bytes */ 733 if (csio->cdb_len > 12) { 734 ccb->ccb_h.status = CAM_REQ_INVALID; 735 xpt_done(ccb); 736 return; 737 } 738 if ((dccb = dptgetccb(dpt)) == NULL) { 739 int s; 740 741 s = splcam(); 742 dpt->resource_shortage = 1; 743 splx(s); 744 xpt_freeze_simq(sim, /*count*/1); 745 ccb->ccb_h.status = CAM_REQUEUE_REQ; 746 xpt_done(ccb); 747 return; 748 } 749 eccb = &dccb->eata_ccb; 750 751 /* Link dccb and ccb so we can find one from the other */ 752 dccb->ccb = ccb; 753 ccb->ccb_h.ccb_dccb_ptr = dccb; 754 ccb->ccb_h.ccb_dpt_ptr = dpt; 755 756 /* 757 * Explicitly set all flags so that the compiler can 758 * be smart about setting them. 759 */ 760 eccb->SCSI_Reset = 0; 761 eccb->HBA_Init = 0; 762 eccb->Auto_Req_Sen = (ccb->ccb_h.flags & CAM_DIS_AUTOSENSE) 763 ? 0 : 1; 764 eccb->scatter = 0; 765 eccb->Quick = 0; 766 eccb->Interpret = 767 ccb->ccb_h.target_id == dpt->hostid[cam_sim_bus(sim)] 768 ? 1 : 0; 769 eccb->DataOut = (ccb->ccb_h.flags & CAM_DIR_OUT) ? 1 : 0; 770 eccb->DataIn = (ccb->ccb_h.flags & CAM_DIR_IN) ? 1 : 0; 771 eccb->reqlen = csio->sense_len; 772 eccb->cp_id = ccb->ccb_h.target_id; 773 eccb->cp_channel = cam_sim_bus(sim); 774 eccb->cp_LUN = ccb->ccb_h.target_lun; 775 eccb->cp_luntar = 0; 776 eccb->cp_dispri = (ccb->ccb_h.flags & CAM_DIS_DISCONNECT) 777 ? 0 : 1; 778 eccb->cp_identify = 1; 779 780 if ((ccb->ccb_h.flags & CAM_TAG_ACTION_VALID) != 0 781 && csio->tag_action != CAM_TAG_ACTION_NONE) { 782 eccb->cp_msg[0] = csio->tag_action; 783 eccb->cp_msg[1] = dccb->tag; 784 } else { 785 eccb->cp_msg[0] = 0; 786 eccb->cp_msg[1] = 0; 787 } 788 eccb->cp_msg[2] = 0; 789 790 if ((ccb->ccb_h.flags & CAM_CDB_POINTER) != 0) { 791 if ((ccb->ccb_h.flags & CAM_CDB_PHYS) == 0) { 792 bcopy(csio->cdb_io.cdb_ptr, 793 eccb->cp_cdb, csio->cdb_len); 794 } else { 795 /* I guess I could map it in... */ 796 ccb->ccb_h.status = CAM_REQ_INVALID; 797 dptfreeccb(dpt, dccb); 798 xpt_done(ccb); 799 return; 800 } 801 } else { 802 bcopy(csio->cdb_io.cdb_bytes, 803 eccb->cp_cdb, csio->cdb_len); 804 } 805 /* 806 * If we have any data to send with this command, 807 * map it into bus space. 808 */ 809 /* Only use S/G if there is a transfer */ 810 if ((ccbh->flags & CAM_DIR_MASK) != CAM_DIR_NONE) { 811 if ((ccbh->flags & CAM_SCATTER_VALID) == 0) { 812 /* 813 * We've been given a pointer 814 * to a single buffer. 815 */ 816 if ((ccbh->flags & CAM_DATA_PHYS) == 0) { 817 int s; 818 int error; 819 820 s = splsoftvm(); 821 error = 822 bus_dmamap_load(dpt->buffer_dmat, 823 dccb->dmamap, 824 csio->data_ptr, 825 csio->dxfer_len, 826 dptexecuteccb, 827 dccb, /*flags*/0); 828 if (error == EINPROGRESS) { 829 /* 830 * So as to maintain ordering, 831 * freeze the controller queue 832 * until our mapping is 833 * returned. 834 */ 835 xpt_freeze_simq(sim, 1); 836 dccb->state |= CAM_RELEASE_SIMQ; 837 } 838 splx(s); 839 } else { 840 struct bus_dma_segment seg; 841 842 /* Pointer to physical buffer */ 843 seg.ds_addr = 844 (bus_addr_t)csio->data_ptr; 845 seg.ds_len = csio->dxfer_len; 846 dptexecuteccb(dccb, &seg, 1, 0); 847 } 848 } else { 849 struct bus_dma_segment *segs; 850 851 if ((ccbh->flags & CAM_DATA_PHYS) != 0) 852 panic("dpt_action - Physical " 853 "segment pointers " 854 "unsupported"); 855 856 if ((ccbh->flags&CAM_SG_LIST_PHYS)==0) 857 panic("dpt_action - Virtual " 858 "segment addresses " 859 "unsupported"); 860 861 /* Just use the segments provided */ 862 segs = (struct bus_dma_segment *)csio->data_ptr; 863 dptexecuteccb(dccb, segs, csio->sglist_cnt, 0); 864 } 865 } else { 866 /* 867 * XXX JGibbs. 868 * Does it want them both on or both off? 869 * CAM_DIR_NONE is both on, so this code can 870 * be removed if this is also what the DPT 871 * exptects. 872 */ 873 eccb->DataOut = 0; 874 eccb->DataIn = 0; 875 dptexecuteccb(dccb, NULL, 0, 0); 876 } 877 break; 878 } 879 case XPT_RESET_DEV: /* Bus Device Reset the specified SCSI device */ 880 case XPT_ABORT: /* Abort the specified CCB */ 881 /* XXX Implement */ 882 ccb->ccb_h.status = CAM_REQ_INVALID; 883 xpt_done(ccb); 884 break; 885 case XPT_SET_TRAN_SETTINGS: 886 { 887 ccb->ccb_h.status = CAM_FUNC_NOTAVAIL; 888 xpt_done(ccb); 889 break; 890 } 891 case XPT_GET_TRAN_SETTINGS: 892 /* Get default/user set transfer settings for the target */ 893 { 894 struct ccb_trans_settings *cts; 895 u_int target_mask; 896 897 cts = &ccb->cts; 898 target_mask = 0x01 << ccb->ccb_h.target_id; 899 if ((cts->flags & CCB_TRANS_USER_SETTINGS) != 0) { 900 cts->flags = CCB_TRANS_DISC_ENB|CCB_TRANS_TAG_ENB; 901 cts->bus_width = (dpt->max_id > 7) 902 ? MSG_EXT_WDTR_BUS_8_BIT 903 : MSG_EXT_WDTR_BUS_16_BIT; 904 cts->sync_period = 25; /* 10MHz */ 905 906 if (cts->sync_period != 0) 907 cts->sync_offset = 15; 908 909 cts->valid = CCB_TRANS_SYNC_RATE_VALID 910 | CCB_TRANS_SYNC_OFFSET_VALID 911 | CCB_TRANS_BUS_WIDTH_VALID 912 | CCB_TRANS_DISC_VALID 913 | CCB_TRANS_TQ_VALID; 914 ccb->ccb_h.status = CAM_REQ_CMP; 915 } else { 916 ccb->ccb_h.status = CAM_FUNC_NOTAVAIL; 917 } 918 xpt_done(ccb); 919 break; 920 } 921 case XPT_CALC_GEOMETRY: 922 { 923 struct ccb_calc_geometry *ccg; 924 u_int32_t size_mb; 925 u_int32_t secs_per_cylinder; 926 int extended; 927 928 /* 929 * XXX Use Adaptec translation until I find out how to 930 * get this information from the card. 931 */ 932 ccg = &ccb->ccg; 933 size_mb = ccg->volume_size 934 / ((1024L * 1024L) / ccg->block_size); 935 extended = 1; 936 937 if (size_mb > 1024 && extended) { 938 ccg->heads = 255; 939 ccg->secs_per_track = 63; 940 } else { 941 ccg->heads = 64; 942 ccg->secs_per_track = 32; 943 } 944 secs_per_cylinder = ccg->heads * ccg->secs_per_track; 945 ccg->cylinders = ccg->volume_size / secs_per_cylinder; 946 ccb->ccb_h.status = CAM_REQ_CMP; 947 xpt_done(ccb); 948 break; 949 } 950 case XPT_RESET_BUS: /* Reset the specified SCSI bus */ 951 { 952 /* XXX Implement */ 953 ccb->ccb_h.status = CAM_REQ_CMP; 954 xpt_done(ccb); 955 break; 956 } 957 case XPT_TERM_IO: /* Terminate the I/O process */ 958 /* XXX Implement */ 959 ccb->ccb_h.status = CAM_REQ_INVALID; 960 xpt_done(ccb); 961 break; 962 case XPT_PATH_INQ: /* Path routing inquiry */ 963 { 964 struct ccb_pathinq *cpi = &ccb->cpi; 965 966 cpi->version_num = 1; 967 cpi->hba_inquiry = PI_SDTR_ABLE|PI_TAG_ABLE; 968 if (dpt->max_id > 7) 969 cpi->hba_inquiry |= PI_WIDE_16; 970 cpi->target_sprt = 0; 971 cpi->hba_misc = 0; 972 cpi->hba_eng_cnt = 0; 973 cpi->max_target = dpt->max_id; 974 cpi->max_lun = dpt->max_lun; 975 cpi->initiator_id = dpt->hostid[cam_sim_bus(sim)]; 976 cpi->bus_id = cam_sim_bus(sim); 977 cpi->base_transfer_speed = 3300; 978 strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN); 979 strncpy(cpi->hba_vid, "DPT", HBA_IDLEN); 980 strncpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN); 981 cpi->unit_number = cam_sim_unit(sim); 982 cpi->ccb_h.status = CAM_REQ_CMP; 983 xpt_done(ccb); 984 break; 985 } 986 default: 987 ccb->ccb_h.status = CAM_REQ_INVALID; 988 xpt_done(ccb); 989 break; 990 } 991} 992 993/* 994 * This routine will try to send an EATA command to the DPT HBA. 995 * It will, by default, try 20,000 times, waiting 50us between tries. 996 * It returns 0 on success and 1 on failure. 997 * It is assumed to be called at splcam(). 998 */ 999static int 1000dpt_send_eata_command(dpt_softc_t *dpt, eata_ccb_t *cmd_block, 1001 u_int32_t cmd_busaddr, u_int command, u_int retries, 1002 u_int ifc, u_int code, u_int code2) 1003{ 1004 u_int loop; 1005 1006 if (!retries) 1007 retries = 20000; 1008 1009 /* 1010 * I hate this polling nonsense. Wish there was a way to tell the DPT 1011 * to go get commands at its own pace, or to interrupt when ready. 1012 * In the mean time we will measure how many itterations it really 1013 * takes. 1014 */ 1015 for (loop = 0; loop < retries; loop++) { 1016 if ((dpt_inb(dpt, HA_RAUXSTAT) & HA_ABUSY) == 0) 1017 break; 1018 else 1019 DELAY(50); 1020 } 1021 1022 if (loop < retries) { 1023#ifdef DPT_MEASURE_PERFORMANCE 1024 if (loop > dpt->performance.max_eata_tries) 1025 dpt->performance.max_eata_tries = loop; 1026 1027 if (loop < dpt->performance.min_eata_tries) 1028 dpt->performance.min_eata_tries = loop; 1029#endif 1030 } else { 1031#ifdef DPT_MEASURE_PERFORMANCE 1032 ++dpt->performance.command_too_busy; 1033#endif 1034 return (1); 1035 } 1036 1037 /* The controller is alive, advance the wedge timer */ 1038#ifdef DPT_RESET_HBA 1039 dpt->last_contact = microtime_now; 1040#endif 1041 1042 if (cmd_block == NULL) 1043 cmd_busaddr = 0; 1044#if (BYTE_ORDER == BIG_ENDIAN) 1045 else { 1046 cmd_busaddr = ((cmd_busaddr >> 24) & 0xFF) 1047 | ((cmd_busaddr >> 16) & 0xFF) 1048 | ((cmd_busaddr >> 8) & 0xFF) 1049 | (cmd_busaddr & 0xFF); 1050 } 1051#endif 1052 /* And now the address */ 1053 dpt_outl(dpt, HA_WDMAADDR, cmd_busaddr); 1054 1055 if (command == EATA_CMD_IMMEDIATE) { 1056 if (cmd_block == NULL) { 1057 dpt_outb(dpt, HA_WCODE2, code2); 1058 dpt_outb(dpt, HA_WCODE, code); 1059 } 1060 dpt_outb(dpt, HA_WIFC, ifc); 1061 } 1062 dpt_outb(dpt, HA_WCOMMAND, command); 1063 1064 return (0); 1065} 1066 1067 1068/* ==================== Exported Function definitions =======================*/ 1069struct dpt_softc * 1070dpt_alloc(u_int unit, bus_space_tag_t tag, bus_space_handle_t bsh) 1071{ 1072 struct dpt_softc *dpt; 1073 int i; 1074 1075 dpt = (struct dpt_softc *)malloc(sizeof(*dpt), M_DEVBUF, M_NOWAIT); 1076 if (dpt == NULL) { 1077 printf("dpt%d: Unable to allocate softc\n", dpt->unit); 1078 return (NULL); 1079 } 1080 1081 bzero(dpt, sizeof(dpt_softc_t)); 1082 dpt->tag = tag; 1083 dpt->bsh = bsh; 1084 dpt->unit = unit; 1085 SLIST_INIT(&dpt->free_dccb_list); 1086 LIST_INIT(&dpt->pending_ccb_list); 1087 TAILQ_INSERT_TAIL(&dpt_softcs, dpt, links); 1088 for (i = 0; i < MAX_CHANNELS; i++) 1089 dpt->resetlevel[i] = DPT_HA_OK; 1090 1091#ifdef DPT_MEASURE_PERFORMANCE 1092 dpt_reset_performance(dpt); 1093#endif /* DPT_MEASURE_PERFORMANCE */ 1094 return (dpt); 1095} 1096 1097void 1098dpt_free(struct dpt_softc *dpt) 1099{ 1100 switch (dpt->init_level) { 1101 default: 1102 case 5: 1103 bus_dmamap_unload(dpt->dccb_dmat, dpt->dccb_dmamap); 1104 case 4: 1105 bus_dmamem_free(dpt->dccb_dmat, dpt->dpt_dccbs, 1106 dpt->dccb_dmamap); 1107 bus_dmamap_destroy(dpt->dccb_dmat, dpt->dccb_dmamap); 1108 case 3: 1109 bus_dma_tag_destroy(dpt->dccb_dmat); 1110 case 2: 1111 bus_dma_tag_destroy(dpt->buffer_dmat); 1112 case 1: 1113 { 1114 struct sg_map_node *sg_map; 1115 1116 while ((sg_map = SLIST_FIRST(&dpt->sg_maps)) != NULL) { 1117 SLIST_REMOVE_HEAD(&dpt->sg_maps, links); 1118 bus_dmamap_unload(dpt->sg_dmat, 1119 sg_map->sg_dmamap); 1120 bus_dmamem_free(dpt->sg_dmat, sg_map->sg_vaddr, 1121 sg_map->sg_dmamap); 1122 free(sg_map, M_DEVBUF); 1123 } 1124 bus_dma_tag_destroy(dpt->sg_dmat); 1125 } 1126 case 0: 1127 break; 1128 } 1129 TAILQ_REMOVE(&dpt_softcs, dpt, links); 1130 free(dpt, M_DEVBUF); 1131} 1132 1133static u_int8_t string_sizes[] = 1134{ 1135 sizeof(((dpt_inq_t*)NULL)->vendor), 1136 sizeof(((dpt_inq_t*)NULL)->modelNum), 1137 sizeof(((dpt_inq_t*)NULL)->firmware), 1138 sizeof(((dpt_inq_t*)NULL)->protocol), 1139}; 1140 1141int 1142dpt_init(struct dpt_softc *dpt) 1143{ 1144 dpt_conf_t conf; 1145 struct sg_map_node *sg_map; 1146 dpt_ccb_t *dccb; 1147 u_int8_t *strp; 1148 int index; 1149 int i; 1150 int retval; 1151 1152 dpt->init_level = 0; 1153 SLIST_INIT(&dpt->sg_maps); 1154 1155#ifdef DPT_RESET_BOARD 1156 printf("dpt%d: resetting HBA\n", dpt->unit); 1157 dpt_outb(dpt, HA_WCOMMAND, EATA_CMD_RESET); 1158 DELAY(750000); 1159 /* XXX Shouldn't we poll a status register or something??? */ 1160#endif 1161 /* DMA tag for our S/G structures. We allocate in page sized chunks */
|
1162 if (bus_dma_tag_create(dpt->parent_dmat, /*alignment*/0, /*boundary*/0,
|
1162 if (bus_dma_tag_create(dpt->parent_dmat, /*alignment*/1, /*boundary*/0, |
1163 /*lowaddr*/BUS_SPACE_MAXADDR, 1164 /*highaddr*/BUS_SPACE_MAXADDR, 1165 /*filter*/NULL, /*filterarg*/NULL, 1166 PAGE_SIZE, /*nsegments*/1, 1167 /*maxsegsz*/BUS_SPACE_MAXSIZE_32BIT, 1168 /*flags*/0, &dpt->sg_dmat) != 0) { 1169 goto error_exit; 1170 } 1171 1172 dpt->init_level++; 1173 1174 /* 1175 * We allocate our DPT ccbs as a contiguous array of bus dma'able 1176 * memory. To get the allocation size, we need to know how many 1177 * ccbs the card supports. This requires a ccb. We solve this 1178 * chicken and egg problem by allocating some re-usable S/G space 1179 * up front, and treating it as our status packet, CCB, and target 1180 * memory space for these commands. 1181 */ 1182 sg_map = dptallocsgmap(dpt); 1183 if (sg_map == NULL) 1184 goto error_exit; 1185 1186 dpt->sp = (volatile dpt_sp_t *)sg_map->sg_vaddr; 1187 dccb = (struct dpt_ccb *)&dpt->sp[1]; 1188 bzero(dccb, sizeof(*dccb)); 1189 dpt->sp_physaddr = sg_map->sg_physaddr; 1190 dccb->eata_ccb.cp_dataDMA = 1191 htonl(sg_map->sg_physaddr + sizeof(dpt_sp_t) + sizeof(*dccb)); 1192 dccb->eata_ccb.cp_busaddr = ~0; 1193 dccb->eata_ccb.cp_statDMA = htonl(dpt->sp_physaddr); 1194 dccb->eata_ccb.cp_reqDMA = htonl(dpt->sp_physaddr + sizeof(*dccb) 1195 + offsetof(struct dpt_ccb, sense_data)); 1196 1197 /* Okay. Fetch our config */ 1198 bzero(&dccb[1], sizeof(conf)); /* data area */ 1199 retval = dpt_get_conf(dpt, dccb, sg_map->sg_physaddr + sizeof(dpt_sp_t), 1200 sizeof(conf), 0xc1, 7, 1); 1201 1202 if (retval != 0) { 1203 printf("dpt%d: Failed to get board configuration\n", dpt->unit); 1204 return (retval); 1205 } 1206 bcopy(&dccb[1], &conf, sizeof(conf)); 1207 1208 bzero(&dccb[1], sizeof(dpt->board_data)); 1209 retval = dpt_get_conf(dpt, dccb, sg_map->sg_physaddr + sizeof(dpt_sp_t), 1210 sizeof(dpt->board_data), 0, conf.scsi_id0, 0); 1211 if (retval != 0) { 1212 printf("dpt%d: Failed to get inquiry information\n", dpt->unit); 1213 return (retval); 1214 } 1215 bcopy(&dccb[1], &dpt->board_data, sizeof(dpt->board_data)); 1216 1217 dpt_detect_cache(dpt, dccb, sg_map->sg_physaddr + sizeof(dpt_sp_t), 1218 (u_int8_t *)&dccb[1]); 1219 1220 switch (ntohl(conf.splen)) { 1221 case DPT_EATA_REVA: 1222 dpt->EATA_revision = 'a'; 1223 break; 1224 case DPT_EATA_REVB: 1225 dpt->EATA_revision = 'b'; 1226 break; 1227 case DPT_EATA_REVC: 1228 dpt->EATA_revision = 'c'; 1229 break; 1230 case DPT_EATA_REVZ: 1231 dpt->EATA_revision = 'z'; 1232 break; 1233 default: 1234 dpt->EATA_revision = '?'; 1235 } 1236 1237 dpt->max_id = conf.MAX_ID; 1238 dpt->max_lun = conf.MAX_LUN; 1239 dpt->irq = conf.IRQ; 1240 dpt->dma_channel = (8 - conf.DMA_channel) & 7; 1241 dpt->channels = conf.MAX_CHAN + 1; 1242 dpt->state |= DPT_HA_OK; 1243 if (conf.SECOND) 1244 dpt->primary = FALSE; 1245 else 1246 dpt->primary = TRUE; 1247 1248 dpt->more_support = conf.MORE_support; 1249 1250 if (strncmp(dpt->board_data.firmware, "07G0", 4) >= 0) 1251 dpt->immediate_support = 1; 1252 else 1253 dpt->immediate_support = 0; 1254 1255 dpt->broken_INQUIRY = FALSE; 1256 1257 dpt->cplen = ntohl(conf.cplen); 1258 dpt->cppadlen = ntohs(conf.cppadlen); 1259 dpt->max_dccbs = ntohs(conf.queuesiz); 1260 1261 if (dpt->max_dccbs > 256) { 1262 printf("dpt%d: Max CCBs reduced from %d to " 1263 "256 due to tag algorithm\n", dpt->unit, dpt->max_dccbs); 1264 dpt->max_dccbs = 256; 1265 } 1266 1267 dpt->hostid[0] = conf.scsi_id0; 1268 dpt->hostid[1] = conf.scsi_id1; 1269 dpt->hostid[2] = conf.scsi_id2; 1270 1271 if (conf.SG_64K) 1272 dpt->sgsize = 8192; 1273 else 1274 dpt->sgsize = ntohs(conf.SGsiz); 1275 1276 /* We can only get 64k buffers, so don't bother to waste space. */ 1277 if (dpt->sgsize < 17 || dpt->sgsize > 32) 1278 dpt->sgsize = 32; 1279 1280 if (dpt->sgsize > dpt_max_segs) 1281 dpt->sgsize = dpt_max_segs; 1282 1283 /* DMA tag for mapping buffers into device visible space. */
|
1284 if (bus_dma_tag_create(dpt->parent_dmat, /*alignment*/0, /*boundary*/0,
|
1284 if (bus_dma_tag_create(dpt->parent_dmat, /*alignment*/1, /*boundary*/0, |
1285 /*lowaddr*/BUS_SPACE_MAXADDR, 1286 /*highaddr*/BUS_SPACE_MAXADDR, 1287 /*filter*/NULL, /*filterarg*/NULL, 1288 /*maxsize*/MAXBSIZE, /*nsegments*/dpt->sgsize, 1289 /*maxsegsz*/BUS_SPACE_MAXSIZE_32BIT, 1290 /*flags*/BUS_DMA_ALLOCNOW, 1291 &dpt->buffer_dmat) != 0) { 1292 goto error_exit; 1293 } 1294 1295 dpt->init_level++; 1296 1297 /* DMA tag for our ccb structures and interrupt status packet */
|
1298 if (bus_dma_tag_create(dpt->parent_dmat, /*alignment*/0, /*boundary*/0,
|
1298 if (bus_dma_tag_create(dpt->parent_dmat, /*alignment*/1, /*boundary*/0, |
1299 /*lowaddr*/BUS_SPACE_MAXADDR, 1300 /*highaddr*/BUS_SPACE_MAXADDR, 1301 /*filter*/NULL, /*filterarg*/NULL, 1302 (dpt->max_dccbs * sizeof(struct dpt_ccb)) 1303 + sizeof(dpt_sp_t), 1304 /*nsegments*/1, 1305 /*maxsegsz*/BUS_SPACE_MAXSIZE_32BIT, 1306 /*flags*/0, &dpt->dccb_dmat) != 0) { 1307 goto error_exit; 1308 } 1309 1310 dpt->init_level++; 1311 1312 /* Allocation for our ccbs and interrupt status packet */ 1313 if (bus_dmamem_alloc(dpt->dccb_dmat, (void **)&dpt->dpt_dccbs, 1314 BUS_DMA_NOWAIT, &dpt->dccb_dmamap) != 0) { 1315 goto error_exit; 1316 } 1317 1318 dpt->init_level++; 1319 1320 /* And permanently map them */ 1321 bus_dmamap_load(dpt->dccb_dmat, dpt->dccb_dmamap, 1322 dpt->dpt_dccbs, 1323 (dpt->max_dccbs * sizeof(struct dpt_ccb)) 1324 + sizeof(dpt_sp_t), 1325 dptmapmem, &dpt->dpt_ccb_busbase, /*flags*/0); 1326 1327 /* Clear them out. */ 1328 bzero(dpt->dpt_dccbs, 1329 (dpt->max_dccbs * sizeof(struct dpt_ccb)) + sizeof(dpt_sp_t)); 1330 1331 dpt->dpt_ccb_busend = dpt->dpt_ccb_busbase; 1332 1333 dpt->sp = (dpt_sp_t*)&dpt->dpt_dccbs[dpt->max_dccbs]; 1334 dpt->sp_physaddr = dpt->dpt_ccb_busbase 1335 + (dpt->max_dccbs * sizeof(dpt_ccb_t)); 1336 dpt->init_level++; 1337 1338 /* Allocate our first batch of ccbs */ 1339 if (dptallocccbs(dpt) == 0) 1340 return (2); 1341 1342 /* Prepare for Target Mode */ 1343 dpt->target_mode_enabled = 1; 1344 1345 /* Nuke excess spaces from inquiry information */ 1346 strp = dpt->board_data.vendor; 1347 for (i = 0; i < sizeof(string_sizes); i++) { 1348 index = string_sizes[i] - 1; 1349 while (index && (strp[index] == ' ')) 1350 strp[index--] = '\0'; 1351 strp += string_sizes[i]; 1352 } 1353 1354 printf("dpt%d: %.8s %.16s FW Rev. %.4s, ", 1355 dpt->unit, dpt->board_data.vendor, 1356 dpt->board_data.modelNum, dpt->board_data.firmware); 1357 1358 printf("%d channel%s, ", dpt->channels, dpt->channels > 1 ? "s" : ""); 1359 1360 if (dpt->cache_type != DPT_NO_CACHE 1361 && dpt->cache_size != 0) { 1362 printf("%s Cache, ", 1363 dpt->cache_type == DPT_CACHE_WRITETHROUGH 1364 ? "Write-Through" : "Write-Back"); 1365 } 1366 1367 printf("%d CCBs\n", dpt->max_dccbs); 1368 return (0); 1369 1370error_exit: 1371 return (1); 1372} 1373 1374int 1375dpt_attach(dpt_softc_t *dpt) 1376{ 1377 struct cam_devq *devq; 1378 int i; 1379 1380 /* 1381 * Create the device queue for our SIM. 1382 */ 1383 devq = cam_simq_alloc(dpt->max_dccbs); 1384 if (devq == NULL) 1385 return (0); 1386 1387 for (i = 0; i < dpt->channels; i++) { 1388 /* 1389 * Construct our SIM entry 1390 */ 1391 dpt->sims[i] = cam_sim_alloc(dpt_action, dpt_poll, "dpt", 1392 dpt, dpt->unit, /*untagged*/2, 1393 /*tagged*/dpt->max_dccbs, devq); 1394 if (xpt_bus_register(dpt->sims[i], i) != CAM_SUCCESS) { 1395 cam_sim_free(dpt->sims[i], /*free_devq*/i == 0); 1396 break; 1397 } 1398 1399 if (xpt_create_path(&dpt->paths[i], /*periph*/NULL, 1400 cam_sim_path(dpt->sims[i]), 1401 CAM_TARGET_WILDCARD, 1402 CAM_LUN_WILDCARD) != CAM_REQ_CMP) { 1403 xpt_bus_deregister(cam_sim_path(dpt->sims[i])); 1404 cam_sim_free(dpt->sims[i], /*free_devq*/i == 0); 1405 break; 1406 } 1407 1408 } 1409 if (i > 0) 1410 at_shutdown(dptshutdown, dpt, SHUTDOWN_FINAL); 1411 return (i); 1412} 1413 1414 1415/* 1416 * This is the interrupt handler for the DPT driver. 1417 */ 1418void 1419dpt_intr(void *arg) 1420{ 1421 dpt_softc_t *dpt; 1422 dpt_ccb_t *dccb; 1423 union ccb *ccb; 1424 u_int status; 1425 u_int aux_status; 1426 u_int hba_stat; 1427 u_int scsi_stat; 1428 u_int32_t residue_len; /* Number of bytes not transferred */ 1429 1430 dpt = (dpt_softc_t *)arg; 1431 1432 /* First order of business is to check if this interrupt is for us */ 1433 while (((aux_status = dpt_inb(dpt, HA_RAUXSTAT)) & HA_AIRQ) != 0) { 1434 1435 /* 1436 * What we want to do now, is to capture the status, all of it, 1437 * move it where it belongs, wake up whoever sleeps waiting to 1438 * process this result, and get out of here. 1439 */ 1440 if (dpt->sp->ccb_busaddr < dpt->dpt_ccb_busbase 1441 || dpt->sp->ccb_busaddr >= dpt->dpt_ccb_busend) { 1442 printf("Encountered bogus status packet\n"); 1443 status = dpt_inb(dpt, HA_RSTATUS); 1444 return; 1445 } 1446 1447 dccb = dptccbptov(dpt, dpt->sp->ccb_busaddr); 1448 1449 dpt->sp->ccb_busaddr = ~0; 1450 1451 /* Ignore status packets with EOC not set */ 1452 if (dpt->sp->EOC == 0) { 1453 printf("dpt%d ERROR: Request %d recieved with " 1454 "clear EOC.\n Marking as LOST.\n", 1455 dpt->unit, dccb->transaction_id); 1456 1457#ifdef DPT_HANDLE_TIMEOUTS 1458 dccb->state |= DPT_CCB_STATE_MARKED_LOST; 1459#endif 1460 /* This CLEARS the interrupt! */ 1461 status = dpt_inb(dpt, HA_RSTATUS); 1462 continue; 1463 } 1464 dpt->sp->EOC = 0; 1465 1466 /* 1467 * Double buffer the status information so the hardware can 1468 * work on updating the status packet while we decifer the 1469 * one we were just interrupted for. 1470 * According to Mark Salyzyn, we only need few pieces of it. 1471 */ 1472 hba_stat = dpt->sp->hba_stat; 1473 scsi_stat = dpt->sp->scsi_stat; 1474 residue_len = dpt->sp->residue_len; 1475 1476 /* Clear interrupts, check for error */ 1477 if ((status = dpt_inb(dpt, HA_RSTATUS)) & HA_SERROR) { 1478 /* 1479 * Error Condition. Check for magic cookie. Exit 1480 * this test on earliest sign of non-reset condition 1481 */ 1482 1483 /* Check that this is not a board reset interrupt */ 1484 if (dpt_just_reset(dpt)) { 1485 printf("dpt%d: HBA rebooted.\n" 1486 " All transactions should be " 1487 "resubmitted\n", 1488 dpt->unit); 1489 1490 printf("dpt%d: >>---->> This is incomplete, " 1491 "fix me.... <<----<<", dpt->unit); 1492 panic("DPT Rebooted"); 1493 1494 } 1495 } 1496 /* Process CCB */ 1497 ccb = dccb->ccb; 1498 untimeout(dpttimeout, dccb, ccb->ccb_h.timeout_ch); 1499 if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE) { 1500 bus_dmasync_op_t op; 1501 1502 if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) 1503 op = BUS_DMASYNC_POSTREAD; 1504 else 1505 op = BUS_DMASYNC_POSTWRITE; 1506 bus_dmamap_sync(dpt->buffer_dmat, dccb->dmamap, op); 1507 bus_dmamap_unload(dpt->buffer_dmat, dccb->dmamap); 1508 } 1509 1510 /* Common Case inline... */ 1511 if (hba_stat == HA_NO_ERROR) { 1512 ccb->csio.scsi_status = scsi_stat; 1513 ccb->ccb_h.status = 0; 1514 switch (scsi_stat) { 1515 case SCSI_STATUS_OK: 1516 ccb->ccb_h.status |= CAM_REQ_CMP; 1517 break; 1518 case SCSI_STATUS_CHECK_COND: 1519 case SCSI_STATUS_CMD_TERMINATED: 1520 bcopy(&dccb->sense_data, &ccb->csio.sense_data, 1521 ccb->csio.sense_len); 1522 ccb->ccb_h.status |= CAM_AUTOSNS_VALID; 1523 /* FALLTHROUGH */ 1524 default: 1525 ccb->ccb_h.status |= CAM_SCSI_STATUS_ERROR; 1526 /* XXX Freeze DevQ */ 1527 break; 1528 } 1529 ccb->csio.resid = residue_len; 1530 dptfreeccb(dpt, dccb); 1531 xpt_done(ccb); 1532 } else { 1533 dptprocesserror(dpt, dccb, ccb, hba_stat, scsi_stat, 1534 residue_len); 1535 } 1536 } 1537} 1538 1539static void 1540dptprocesserror(dpt_softc_t *dpt, dpt_ccb_t *dccb, union ccb *ccb, 1541 u_int hba_stat, u_int scsi_stat, u_int32_t resid) 1542{ 1543 ccb->csio.resid = resid; 1544 switch (hba_stat) { 1545 case HA_ERR_SEL_TO: 1546 ccb->ccb_h.status = CAM_SEL_TIMEOUT; 1547 break; 1548 case HA_ERR_CMD_TO: 1549 ccb->ccb_h.status = CAM_CMD_TIMEOUT; 1550 break; 1551 case HA_SCSIBUS_RESET: 1552 case HA_HBA_POWER_UP: /* Similar effect to a bus reset??? */ 1553 ccb->ccb_h.status = CAM_SCSI_BUS_RESET; 1554 break; 1555 case HA_CP_ABORTED: 1556 case HA_CP_RESET: /* XXX ??? */ 1557 case HA_CP_ABORT_NA: /* XXX ??? */ 1558 case HA_CP_RESET_NA: /* XXX ??? */ 1559 if ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_INPROG) 1560 ccb->ccb_h.status = CAM_REQ_ABORTED; 1561 break; 1562 case HA_PCI_PARITY: 1563 case HA_PCI_MABORT: 1564 case HA_PCI_TABORT: 1565 case HA_PCI_STABORT: 1566 case HA_BUS_PARITY: 1567 case HA_PARITY_ERR: 1568 case HA_ECC_ERR: 1569 ccb->ccb_h.status = CAM_UNCOR_PARITY; 1570 break; 1571 case HA_UNX_MSGRJCT: 1572 ccb->ccb_h.status = CAM_MSG_REJECT_REC; 1573 break; 1574 case HA_UNX_BUSPHASE: 1575 ccb->ccb_h.status = CAM_SEQUENCE_FAIL; 1576 break; 1577 case HA_UNX_BUS_FREE: 1578 ccb->ccb_h.status = CAM_UNEXP_BUSFREE; 1579 break; 1580 case HA_SCSI_HUNG: 1581 case HA_RESET_STUCK: 1582 /* 1583 * Dead??? Can the controller get unstuck 1584 * from these conditions 1585 */ 1586 ccb->ccb_h.status = CAM_NO_HBA; 1587 break; 1588 case HA_RSENSE_FAIL: 1589 ccb->ccb_h.status = CAM_AUTOSENSE_FAIL; 1590 break; 1591 default: 1592 printf("dpt%d: Undocumented Error %x\n", dpt->unit, hba_stat); 1593 printf("Please mail this message to shimon@simon-shapiro.org\n"); 1594 ccb->ccb_h.status = CAM_REQ_CMP_ERR; 1595 break; 1596 } 1597 dptfreeccb(dpt, dccb); 1598 xpt_done(ccb); 1599} 1600 1601static void 1602dpttimeout(void *arg) 1603{ 1604 struct dpt_ccb *dccb; 1605 union ccb *ccb; 1606 struct dpt_softc *dpt; 1607 int s; 1608 1609 dccb = (struct dpt_ccb *)arg; 1610 ccb = dccb->ccb; 1611 dpt = (struct dpt_softc *)ccb->ccb_h.ccb_dpt_ptr; 1612 xpt_print_path(ccb->ccb_h.path); 1613 printf("CCB %p - timed out\n", (void *)dccb); 1614 1615 s = splcam(); 1616 1617 /* 1618 * Try to clear any pending jobs. FreeBSD will loose interrupts, 1619 * leaving the controller suspended, and commands timed-out. 1620 * By calling the interrupt handler, any command thus stuck will be 1621 * completed. 1622 */ 1623 dpt_intr(dpt); 1624 1625 if ((dccb->state & DCCB_ACTIVE) == 0) { 1626 xpt_print_path(ccb->ccb_h.path); 1627 printf("CCB %p - timed out CCB already completed\n", 1628 (void *)dccb); 1629 splx(s); 1630 return; 1631 } 1632 1633 /* Abort this particular command. Leave all others running */ 1634 dpt_send_immediate(dpt, &dccb->eata_ccb, dccb->eata_ccb.cp_busaddr, 1635 /*retries*/20000, EATA_SPECIFIC_ABORT, 0, 0); 1636 ccb->ccb_h.status = CAM_CMD_TIMEOUT; 1637 splx(s); 1638} 1639 1640/* 1641 * Shutdown the controller and ensure that the cache is completely flushed. 1642 * Called via at_shutdown(9) after all disk access has completed. 1643 */ 1644static void 1645dptshutdown(int howto, void *arg) 1646{ 1647 dpt_softc_t *dpt; 1648 1649 dpt = (dpt_softc_t *)arg; 1650 1651 printf("dpt%d: Shutting down (mode %x) HBA. Please wait...\n", 1652 dpt->unit, howto); 1653 1654 /* 1655 * What we do for a shutdown, is give the DPT early power loss warning 1656 */ 1657 dpt_send_immediate(dpt, NULL, 0, EATA_POWER_OFF_WARN, 0, 0, 0); 1658 DELAY(1000 * 1000 * 5); 1659 printf("dpt%d: Controller was warned of shutdown and is now " 1660 "disabled\n", dpt->unit); 1661} 1662 1663/*============================================================================*/ 1664 1665#if 0 1666#ifdef DPT_RESET_HBA 1667 1668/* 1669** Function name : dpt_reset_hba 1670** 1671** Description : Reset the HBA and properly discard all pending work 1672** Input : Softc 1673** Output : Nothing 1674*/ 1675static void 1676dpt_reset_hba(dpt_softc_t *dpt) 1677{ 1678 eata_ccb_t *ccb; 1679 int ospl; 1680 dpt_ccb_t dccb, *dccbp; 1681 int result; 1682 struct scsi_xfer *xs; 1683 1684 /* Prepare a control block. The SCSI command part is immaterial */ 1685 dccb.xs = NULL; 1686 dccb.flags = 0; 1687 dccb.state = DPT_CCB_STATE_NEW; 1688 dccb.std_callback = NULL; 1689 dccb.wrbuff_callback = NULL; 1690 1691 ccb = &dccb.eata_ccb; 1692 ccb->CP_OpCode = EATA_CMD_RESET; 1693 ccb->SCSI_Reset = 0; 1694 ccb->HBA_Init = 1; 1695 ccb->Auto_Req_Sen = 1; 1696 ccb->cp_id = 0; /* Should be ignored */ 1697 ccb->DataIn = 1; 1698 ccb->DataOut = 0; 1699 ccb->Interpret = 1; 1700 ccb->reqlen = htonl(sizeof(struct scsi_sense_data)); 1701 ccb->cp_statDMA = htonl(vtophys(&ccb->cp_statDMA)); 1702 ccb->cp_reqDMA = htonl(vtophys(&ccb->cp_reqDMA)); 1703 ccb->cp_viraddr = (u_int32_t) & ccb; 1704 1705 ccb->cp_msg[0] = HA_IDENTIFY_MSG | HA_DISCO_RECO; 1706 ccb->cp_scsi_cmd = 0; /* Should be ignored */ 1707 1708 /* Lock up the submitted queue. We are very persistant here */ 1709 ospl = splcam(); 1710 while (dpt->queue_status & DPT_SUBMITTED_QUEUE_ACTIVE) { 1711 DELAY(100); 1712 } 1713 1714 dpt->queue_status |= DPT_SUBMITTED_QUEUE_ACTIVE; 1715 splx(ospl); 1716 1717 /* Send the RESET message */ 1718 if ((result = dpt_send_eata_command(dpt, &dccb.eata_ccb, 1719 EATA_CMD_RESET, 0, 0, 0, 0)) != 0) { 1720 printf("dpt%d: Failed to send the RESET message.\n" 1721 " Trying cold boot (ouch!)\n", dpt->unit); 1722 1723 1724 if ((result = dpt_send_eata_command(dpt, &dccb.eata_ccb, 1725 EATA_COLD_BOOT, 0, 0, 1726 0, 0)) != 0) { 1727 panic("dpt%d: Faild to cold boot the HBA\n", 1728 dpt->unit); 1729 } 1730#ifdef DPT_MEASURE_PERFORMANCE 1731 dpt->performance.cold_boots++; 1732#endif /* DPT_MEASURE_PERFORMANCE */ 1733 } 1734 1735#ifdef DPT_MEASURE_PERFORMANCE 1736 dpt->performance.warm_starts++; 1737#endif /* DPT_MEASURE_PERFORMANCE */ 1738 1739 printf("dpt%d: Aborting pending requests. O/S should re-submit\n", 1740 dpt->unit); 1741 1742 while ((dccbp = TAILQ_FIRST(&dpt->completed_ccbs)) != NULL) { 1743 struct scsi_xfer *xs = dccbp->xs; 1744 1745 /* Not all transactions have xs structs */ 1746 if (xs != NULL) { 1747 /* Tell the kernel proper this did not complete well */ 1748 xs->error |= XS_SELTIMEOUT; 1749 xs->flags |= SCSI_ITSDONE; 1750 scsi_done(xs); 1751 } 1752 1753 dpt_Qremove_submitted(dpt, dccbp); 1754 1755 /* Remember, Callbacks are NOT in the standard queue */ 1756 if (dccbp->std_callback != NULL) { 1757 (dccbp->std_callback)(dpt, dccbp->eata_ccb.cp_channel, 1758 dccbp); 1759 } else { 1760 ospl = splcam(); 1761 dpt_Qpush_free(dpt, dccbp); 1762 splx(ospl); 1763 } 1764 } 1765 1766 printf("dpt%d: reset done aborting all pending commands\n", dpt->unit); 1767 dpt->queue_status &= ~DPT_SUBMITTED_QUEUE_ACTIVE; 1768} 1769 1770#endif /* DPT_RESET_HBA */ 1771 1772/* 1773 * Build a Command Block for target mode READ/WRITE BUFFER, 1774 * with the ``sync'' bit ON. 1775 * 1776 * Although the length and offset are 24 bit fields in the command, they cannot 1777 * exceed 8192 bytes, so we take them as short integers andcheck their range. 1778 * If they are sensless, we round them to zero offset, maximum length and 1779 * complain. 1780 */ 1781 1782static void 1783dpt_target_ccb(dpt_softc_t * dpt, int bus, u_int8_t target, u_int8_t lun, 1784 dpt_ccb_t * ccb, int mode, u_int8_t command, 1785 u_int16_t length, u_int16_t offset) 1786{ 1787 eata_ccb_t *cp; 1788 int ospl; 1789 1790 if ((length + offset) > DPT_MAX_TARGET_MODE_BUFFER_SIZE) { 1791 printf("dpt%d: Length of %d, and offset of %d are wrong\n", 1792 dpt->unit, length, offset); 1793 length = DPT_MAX_TARGET_MODE_BUFFER_SIZE; 1794 offset = 0; 1795 } 1796 ccb->xs = NULL; 1797 ccb->flags = 0; 1798 ccb->state = DPT_CCB_STATE_NEW; 1799 ccb->std_callback = (ccb_callback) dpt_target_done; 1800 ccb->wrbuff_callback = NULL; 1801 1802 cp = &ccb->eata_ccb; 1803 cp->CP_OpCode = EATA_CMD_DMA_SEND_CP; 1804 cp->SCSI_Reset = 0; 1805 cp->HBA_Init = 0; 1806 cp->Auto_Req_Sen = 1; 1807 cp->cp_id = target; 1808 cp->DataIn = 1; 1809 cp->DataOut = 0; 1810 cp->Interpret = 0; 1811 cp->reqlen = htonl(sizeof(struct scsi_sense_data)); 1812 cp->cp_statDMA = htonl(vtophys(&cp->cp_statDMA)); 1813 cp->cp_reqDMA = htonl(vtophys(&cp->cp_reqDMA)); 1814 cp->cp_viraddr = (u_int32_t) & ccb; 1815 1816 cp->cp_msg[0] = HA_IDENTIFY_MSG | HA_DISCO_RECO; 1817 1818 cp->cp_scsi_cmd = command; 1819 cp->cp_cdb[1] = (u_int8_t) (mode & SCSI_TM_MODE_MASK); 1820 cp->cp_lun = lun; /* Order is important here! */ 1821 cp->cp_cdb[2] = 0x00; /* Buffer Id, only 1 :-( */ 1822 cp->cp_cdb[3] = (length >> 16) & 0xFF; /* Buffer offset MSB */ 1823 cp->cp_cdb[4] = (length >> 8) & 0xFF; 1824 cp->cp_cdb[5] = length & 0xFF; 1825 cp->cp_cdb[6] = (length >> 16) & 0xFF; /* Length MSB */ 1826 cp->cp_cdb[7] = (length >> 8) & 0xFF; 1827 cp->cp_cdb[8] = length & 0xFF; /* Length LSB */ 1828 cp->cp_cdb[9] = 0; /* No sync, no match bits */ 1829 1830 /* 1831 * This could be optimized to live in dpt_register_buffer. 1832 * We keep it here, just in case the kernel decides to reallocate pages 1833 */ 1834 if (dpt_scatter_gather(dpt, ccb, DPT_RW_BUFFER_SIZE, 1835 dpt->rw_buffer[bus][target][lun])) { 1836 printf("dpt%d: Failed to setup Scatter/Gather for " 1837 "Target-Mode buffer\n", dpt->unit); 1838 } 1839} 1840 1841/* Setup a target mode READ command */ 1842 1843static void 1844dpt_set_target(int redo, dpt_softc_t * dpt, 1845 u_int8_t bus, u_int8_t target, u_int8_t lun, int mode, 1846 u_int16_t length, u_int16_t offset, dpt_ccb_t * ccb) 1847{ 1848 int ospl; 1849 1850 if (dpt->target_mode_enabled) { 1851 ospl = splcam(); 1852 1853 if (!redo) 1854 dpt_target_ccb(dpt, bus, target, lun, ccb, mode, 1855 SCSI_TM_READ_BUFFER, length, offset); 1856 1857 ccb->transaction_id = ++dpt->commands_processed; 1858 1859#ifdef DPT_MEASURE_PERFORMANCE 1860 dpt->performance.command_count[ccb->eata_ccb.cp_scsi_cmd]++; 1861 ccb->command_started = microtime_now; 1862#endif 1863 dpt_Qadd_waiting(dpt, ccb); 1864 dpt_sched_queue(dpt); 1865 1866 splx(ospl); 1867 } else { 1868 printf("dpt%d: Target Mode Request, but Target Mode is OFF\n", 1869 dpt->unit); 1870 } 1871} 1872 1873/* 1874 * Schedule a buffer to be sent to another target. 1875 * The work will be scheduled and the callback provided will be called when 1876 * the work is actually done. 1877 * 1878 * Please NOTE: ``Anyone'' can send a buffer, but only registered clients 1879 * get notified of receipt of buffers. 1880 */ 1881 1882int 1883dpt_send_buffer(int unit, u_int8_t channel, u_int8_t target, u_int8_t lun, 1884 u_int8_t mode, u_int16_t length, u_int16_t offset, void *data, 1885 buff_wr_done callback) 1886{ 1887 dpt_softc_t *dpt; 1888 dpt_ccb_t *ccb = NULL; 1889 int ospl; 1890 1891 /* This is an external call. Be a bit paranoid */ 1892 for (dpt = TAILQ_FIRST(&dpt_softc_list); 1893 dpt != NULL; 1894 dpt = TAILQ_NEXT(dpt, links)) { 1895 if (dpt->unit == unit) 1896 goto valid_unit; 1897 } 1898 1899 return (INVALID_UNIT); 1900 1901valid_unit: 1902 1903 if (dpt->target_mode_enabled) { 1904 if ((channel >= dpt->channels) || (target > dpt->max_id) || 1905 (lun > dpt->max_lun)) { 1906 return (INVALID_SENDER); 1907 } 1908 if ((dpt->rw_buffer[channel][target][lun] == NULL) || 1909 (dpt->buffer_receiver[channel][target][lun] == NULL)) 1910 return (NOT_REGISTERED); 1911 1912 ospl = splsoftcam(); 1913 /* Process the free list */ 1914 if ((TAILQ_EMPTY(&dpt->free_ccbs)) && dpt_alloc_freelist(dpt)) { 1915 printf("dpt%d ERROR: Cannot allocate any more free CCB's.\n" 1916 " Please try later\n", 1917 dpt->unit); 1918 splx(ospl); 1919 return (NO_RESOURCES); 1920 } 1921 /* Now grab the newest CCB */ 1922 if ((ccb = dpt_Qpop_free(dpt)) == NULL) { 1923 splx(ospl); 1924 panic("dpt%d: Got a NULL CCB from pop_free()\n", dpt->unit); 1925 } 1926 splx(ospl); 1927 1928 bcopy(dpt->rw_buffer[channel][target][lun] + offset, data, length); 1929 dpt_target_ccb(dpt, channel, target, lun, ccb, mode, 1930 SCSI_TM_WRITE_BUFFER, 1931 length, offset); 1932 ccb->std_callback = (ccb_callback) callback; /* Potential trouble */ 1933 1934 ospl = splcam(); 1935 ccb->transaction_id = ++dpt->commands_processed; 1936 1937#ifdef DPT_MEASURE_PERFORMANCE 1938 dpt->performance.command_count[ccb->eata_ccb.cp_scsi_cmd]++; 1939 ccb->command_started = microtime_now; 1940#endif 1941 dpt_Qadd_waiting(dpt, ccb); 1942 dpt_sched_queue(dpt); 1943 1944 splx(ospl); 1945 return (0); 1946 } 1947 return (DRIVER_DOWN); 1948} 1949 1950static void 1951dpt_target_done(dpt_softc_t * dpt, int bus, dpt_ccb_t * ccb) 1952{ 1953 int ospl; 1954 eata_ccb_t *cp; 1955 1956 cp = &ccb->eata_ccb; 1957 1958 /* 1959 * Remove the CCB from the waiting queue. 1960 * We do NOT put it back on the free, etc., queues as it is a special 1961 * ccb, owned by the dpt_softc of this unit. 1962 */ 1963 ospl = splsoftcam(); 1964 dpt_Qremove_completed(dpt, ccb); 1965 splx(ospl); 1966 1967#define br_channel (ccb->eata_ccb.cp_channel) 1968#define br_target (ccb->eata_ccb.cp_id) 1969#define br_lun (ccb->eata_ccb.cp_LUN) 1970#define br_index [br_channel][br_target][br_lun] 1971#define read_buffer_callback (dpt->buffer_receiver br_index ) 1972#define read_buffer (dpt->rw_buffer[br_channel][br_target][br_lun]) 1973#define cb(offset) (ccb->eata_ccb.cp_cdb[offset]) 1974#define br_offset ((cb(3) << 16) | (cb(4) << 8) | cb(5)) 1975#define br_length ((cb(6) << 16) | (cb(7) << 8) | cb(8)) 1976 1977 /* Different reasons for being here, you know... */ 1978 switch (ccb->eata_ccb.cp_scsi_cmd) { 1979 case SCSI_TM_READ_BUFFER: 1980 if (read_buffer_callback != NULL) { 1981 /* This is a buffer generated by a kernel process */ 1982 read_buffer_callback(dpt->unit, br_channel, 1983 br_target, br_lun, 1984 read_buffer, 1985 br_offset, br_length); 1986 } else { 1987 /* 1988 * This is a buffer waited for by a user (sleeping) 1989 * command 1990 */ 1991 wakeup(ccb); 1992 } 1993 1994 /* We ALWAYS re-issue the same command; args are don't-care */ 1995 dpt_set_target(1, 0, 0, 0, 0, 0, 0, 0, 0); 1996 break; 1997 1998 case SCSI_TM_WRITE_BUFFER: 1999 (ccb->wrbuff_callback) (dpt->unit, br_channel, br_target, 2000 br_offset, br_length, 2001 br_lun, ccb->status_packet.hba_stat); 2002 break; 2003 default: 2004 printf("dpt%d: %s is an unsupported command for target mode\n", 2005 dpt->unit, scsi_cmd_name(ccb->eata_ccb.cp_scsi_cmd)); 2006 } 2007 ospl = splsoftcam(); 2008 dpt->target_ccb[br_channel][br_target][br_lun] = NULL; 2009 dpt_Qpush_free(dpt, ccb); 2010 splx(ospl); 2011} 2012 2013 2014/* 2015 * Use this function to register a client for a buffer read target operation. 2016 * The function you register will be called every time a buffer is received 2017 * by the target mode code. 2018 */ 2019dpt_rb_t 2020dpt_register_buffer(int unit, u_int8_t channel, u_int8_t target, u_int8_t lun, 2021 u_int8_t mode, u_int16_t length, u_int16_t offset, 2022 dpt_rec_buff callback, dpt_rb_op_t op) 2023{ 2024 dpt_softc_t *dpt; 2025 dpt_ccb_t *ccb = NULL; 2026 int ospl; 2027 2028 for (dpt = TAILQ_FIRST(&dpt_softc_list); 2029 dpt != NULL; 2030 dpt = TAILQ_NEXT(dpt, links)) { 2031 if (dpt->unit == unit) 2032 goto valid_unit; 2033 } 2034 2035 return (INVALID_UNIT); 2036 2037valid_unit: 2038 2039 if (dpt->state & DPT_HA_SHUTDOWN_ACTIVE) 2040 return (DRIVER_DOWN); 2041 2042 if ((channel > (dpt->channels - 1)) || (target > (dpt->max_id - 1)) || 2043 (lun > (dpt->max_lun - 1))) 2044 return (INVALID_SENDER); 2045 2046 if (dpt->buffer_receiver[channel][target][lun] == NULL) { 2047 if (op == REGISTER_BUFFER) { 2048 /* Assign the requested callback */ 2049 dpt->buffer_receiver[channel][target][lun] = callback; 2050 /* Get a CCB */ 2051 ospl = splsoftcam(); 2052 2053 /* Process the free list */ 2054 if ((TAILQ_EMPTY(&dpt->free_ccbs)) && dpt_alloc_freelist(dpt)) { 2055 printf("dpt%d ERROR: Cannot allocate any more free CCB's.\n" 2056 " Please try later\n", 2057 dpt->unit); 2058 splx(ospl); 2059 return (NO_RESOURCES); 2060 } 2061 /* Now grab the newest CCB */ 2062 if ((ccb = dpt_Qpop_free(dpt)) == NULL) { 2063 splx(ospl); 2064 panic("dpt%d: Got a NULL CCB from pop_free()\n", 2065 dpt->unit); 2066 } 2067 splx(ospl); 2068 2069 /* Clean up the leftover of the previous tenant */ 2070 ccb->status = DPT_CCB_STATE_NEW; 2071 dpt->target_ccb[channel][target][lun] = ccb; 2072 2073 dpt->rw_buffer[channel][target][lun] = 2074 malloc(DPT_RW_BUFFER_SIZE, M_DEVBUF, M_NOWAIT); 2075 if (dpt->rw_buffer[channel][target][lun] == NULL) { 2076 printf("dpt%d: Failed to allocate " 2077 "Target-Mode buffer\n", dpt->unit); 2078 ospl = splsoftcam(); 2079 dpt_Qpush_free(dpt, ccb); 2080 splx(ospl); 2081 return (NO_RESOURCES); 2082 } 2083 dpt_set_target(0, dpt, channel, target, lun, mode, 2084 length, offset, ccb); 2085 return (SUCCESSFULLY_REGISTERED); 2086 } else 2087 return (NOT_REGISTERED); 2088 } else { 2089 if (op == REGISTER_BUFFER) { 2090 if (dpt->buffer_receiver[channel][target][lun] == callback) 2091 return (ALREADY_REGISTERED); 2092 else 2093 return (REGISTERED_TO_ANOTHER); 2094 } else { 2095 if (dpt->buffer_receiver[channel][target][lun] == callback) { 2096 dpt->buffer_receiver[channel][target][lun] = NULL; 2097 ospl = splsoftcam(); 2098 dpt_Qpush_free(dpt, ccb); 2099 splx(ospl); 2100 free(dpt->rw_buffer[channel][target][lun], M_DEVBUF); 2101 return (SUCCESSFULLY_REGISTERED); 2102 } else 2103 return (INVALID_CALLBACK); 2104 } 2105 2106 } 2107} 2108 2109/* Return the state of the blinking DPT LED's */ 2110u_int8_t 2111dpt_blinking_led(dpt_softc_t * dpt) 2112{ 2113 int ndx; 2114 int ospl; 2115 u_int32_t state; 2116 u_int32_t previous; 2117 u_int8_t result; 2118 2119 ospl = splcam(); 2120 2121 result = 0; 2122 2123 for (ndx = 0, state = 0, previous = 0; 2124 (ndx < 10) && (state != previous); 2125 ndx++) { 2126 previous = state; 2127 state = dpt_inl(dpt, 1); 2128 } 2129 2130 if ((state == previous) && (state == DPT_BLINK_INDICATOR)) 2131 result = dpt_inb(dpt, 5); 2132 2133 splx(ospl); 2134 return (result); 2135} 2136 2137/* 2138 * Execute a command which did not come from the kernel's SCSI layer. 2139 * The only way to map user commands to bus and target is to comply with the 2140 * standard DPT wire-down scheme: 2141 */ 2142int 2143dpt_user_cmd(dpt_softc_t * dpt, eata_pt_t * user_cmd, 2144 caddr_t cmdarg, int minor_no) 2145{ 2146 dpt_ccb_t *ccb; 2147 void *data; 2148 int channel, target, lun; 2149 int huh; 2150 int result; 2151 int ospl; 2152 int submitted; 2153 2154 data = NULL; 2155 channel = minor2hba(minor_no); 2156 target = minor2target(minor_no); 2157 lun = minor2lun(minor_no); 2158 2159 if ((channel > (dpt->channels - 1)) 2160 || (target > dpt->max_id) 2161 || (lun > dpt->max_lun)) 2162 return (ENXIO); 2163 2164 if (target == dpt->sc_scsi_link[channel].adapter_targ) { 2165 /* This one is for the controller itself */ 2166 if ((user_cmd->eataID[0] != 'E') 2167 || (user_cmd->eataID[1] != 'A') 2168 || (user_cmd->eataID[2] != 'T') 2169 || (user_cmd->eataID[3] != 'A')) { 2170 return (ENXIO); 2171 } 2172 } 2173 /* Get a DPT CCB, so we can prepare a command */ 2174 ospl = splsoftcam(); 2175 2176 /* Process the free list */ 2177 if ((TAILQ_EMPTY(&dpt->free_ccbs)) && dpt_alloc_freelist(dpt)) { 2178 printf("dpt%d ERROR: Cannot allocate any more free CCB's.\n" 2179 " Please try later\n", 2180 dpt->unit); 2181 splx(ospl); 2182 return (EFAULT); 2183 } 2184 /* Now grab the newest CCB */ 2185 if ((ccb = dpt_Qpop_free(dpt)) == NULL) { 2186 splx(ospl); 2187 panic("dpt%d: Got a NULL CCB from pop_free()\n", dpt->unit); 2188 } else { 2189 splx(ospl); 2190 /* Clean up the leftover of the previous tenant */ 2191 ccb->status = DPT_CCB_STATE_NEW; 2192 } 2193 2194 bcopy((caddr_t) & user_cmd->command_packet, (caddr_t) & ccb->eata_ccb, 2195 sizeof(eata_ccb_t)); 2196 2197 /* We do not want to do user specified scatter/gather. Why?? */ 2198 if (ccb->eata_ccb.scatter == 1) 2199 return (EINVAL); 2200 2201 ccb->eata_ccb.Auto_Req_Sen = 1; 2202 ccb->eata_ccb.reqlen = htonl(sizeof(struct scsi_sense_data)); 2203 ccb->eata_ccb.cp_datalen = htonl(sizeof(ccb->eata_ccb.cp_datalen)); 2204 ccb->eata_ccb.cp_dataDMA = htonl(vtophys(ccb->eata_ccb.cp_dataDMA)); 2205 ccb->eata_ccb.cp_statDMA = htonl(vtophys(&ccb->eata_ccb.cp_statDMA)); 2206 ccb->eata_ccb.cp_reqDMA = htonl(vtophys(&ccb->eata_ccb.cp_reqDMA)); 2207 ccb->eata_ccb.cp_viraddr = (u_int32_t) & ccb; 2208 2209 if (ccb->eata_ccb.DataIn || ccb->eata_ccb.DataOut) { 2210 /* Data I/O is involved in this command. Alocate buffer */ 2211 if (ccb->eata_ccb.cp_datalen > PAGE_SIZE) { 2212 data = contigmalloc(ccb->eata_ccb.cp_datalen, 2213 M_TEMP, M_WAITOK, 0, ~0, 2214 ccb->eata_ccb.cp_datalen, 2215 0x10000); 2216 } else { 2217 data = malloc(ccb->eata_ccb.cp_datalen, M_TEMP, 2218 M_WAITOK); 2219 } 2220 2221 if (data == NULL) { 2222 printf("dpt%d: Cannot allocate %d bytes " 2223 "for EATA command\n", dpt->unit, 2224 ccb->eata_ccb.cp_datalen); 2225 return (EFAULT); 2226 } 2227#define usr_cmd_DMA (caddr_t)user_cmd->command_packet.cp_dataDMA 2228 if (ccb->eata_ccb.DataIn == 1) { 2229 if (copyin(usr_cmd_DMA, 2230 data, ccb->eata_ccb.cp_datalen) == -1) 2231 return (EFAULT); 2232 } 2233 } else { 2234 /* No data I/O involved here. Make sure the DPT knows that */ 2235 ccb->eata_ccb.cp_datalen = 0; 2236 data = NULL; 2237 } 2238 2239 if (ccb->eata_ccb.FWNEST == 1) 2240 ccb->eata_ccb.FWNEST = 0; 2241 2242 if (ccb->eata_ccb.cp_datalen != 0) { 2243 if (dpt_scatter_gather(dpt, ccb, ccb->eata_ccb.cp_datalen, 2244 data) != 0) { 2245 if (data != NULL) 2246 free(data, M_TEMP); 2247 return (EFAULT); 2248 } 2249 } 2250 /** 2251 * We are required to quiet a SCSI bus. 2252 * since we do not queue comands on a bus basis, 2253 * we wait for ALL commands on a controller to complete. 2254 * In the mean time, sched_queue() will not schedule new commands. 2255 */ 2256 if ((ccb->eata_ccb.cp_cdb[0] == MULTIFUNCTION_CMD) 2257 && (ccb->eata_ccb.cp_cdb[2] == BUS_QUIET)) { 2258 /* We wait for ALL traffic for this HBa to subside */ 2259 ospl = splsoftcam(); 2260 dpt->state |= DPT_HA_QUIET; 2261 splx(ospl); 2262 2263 while ((submitted = dpt->submitted_ccbs_count) != 0) { 2264 huh = tsleep((void *) dpt, PCATCH | PRIBIO, "dptqt", 2265 100 * hz); 2266 switch (huh) { 2267 case 0: 2268 /* Wakeup call received */ 2269 break; 2270 case EWOULDBLOCK: 2271 /* Timer Expired */ 2272 break; 2273 default: 2274 /* anything else */ 2275 break; 2276 } 2277 } 2278 } 2279 /* Resume normal operation */ 2280 if ((ccb->eata_ccb.cp_cdb[0] == MULTIFUNCTION_CMD) 2281 && (ccb->eata_ccb.cp_cdb[2] == BUS_UNQUIET)) { 2282 ospl = splsoftcam(); 2283 dpt->state &= ~DPT_HA_QUIET; 2284 splx(ospl); 2285 } 2286 /** 2287 * Schedule the command and submit it. 2288 * We bypass dpt_sched_queue, as it will block on DPT_HA_QUIET 2289 */ 2290 ccb->xs = NULL; 2291 ccb->flags = 0; 2292 ccb->eata_ccb.Auto_Req_Sen = 1; /* We always want this feature */ 2293 2294 ccb->transaction_id = ++dpt->commands_processed; 2295 ccb->std_callback = (ccb_callback) dpt_user_cmd_done; 2296 ccb->result = (u_int32_t) & cmdarg; 2297 ccb->data = data; 2298 2299#ifdef DPT_MEASURE_PERFORMANCE 2300 ++dpt->performance.command_count[ccb->eata_ccb.cp_scsi_cmd]; 2301 ccb->command_started = microtime_now; 2302#endif 2303 ospl = splcam(); 2304 dpt_Qadd_waiting(dpt, ccb); 2305 splx(ospl); 2306 2307 dpt_sched_queue(dpt); 2308 2309 /* Wait for the command to complete */ 2310 (void) tsleep((void *) ccb, PCATCH | PRIBIO, "dptucw", 100 * hz); 2311 2312 /* Free allocated memory */ 2313 if (data != NULL) 2314 free(data, M_TEMP); 2315 2316 return (0); 2317} 2318 2319static void 2320dpt_user_cmd_done(dpt_softc_t * dpt, int bus, dpt_ccb_t * ccb) 2321{ 2322 int ospl = splsoftcam(); 2323 u_int32_t result; 2324 caddr_t cmd_arg; 2325 2326 /** 2327 * If Auto Request Sense is on, copyout the sense struct 2328 */ 2329#define usr_pckt_DMA (caddr_t)(intptr_t)ntohl(ccb->eata_ccb.cp_reqDMA) 2330#define usr_pckt_len ntohl(ccb->eata_ccb.cp_datalen) 2331 if (ccb->eata_ccb.Auto_Req_Sen == 1) { 2332 if (copyout((caddr_t) & ccb->sense_data, usr_pckt_DMA, 2333 sizeof(struct scsi_sense_data))) { 2334 ccb->result = EFAULT; 2335 dpt_Qpush_free(dpt, ccb); 2336 splx(ospl); 2337 wakeup(ccb); 2338 return; 2339 } 2340 } 2341 /* If DataIn is on, copyout the data */ 2342 if ((ccb->eata_ccb.DataIn == 1) 2343 && (ccb->status_packet.hba_stat == HA_NO_ERROR)) { 2344 if (copyout(ccb->data, usr_pckt_DMA, usr_pckt_len)) { 2345 dpt_Qpush_free(dpt, ccb); 2346 ccb->result = EFAULT; 2347 2348 splx(ospl); 2349 wakeup(ccb); 2350 return; 2351 } 2352 } 2353 /* Copyout the status */ 2354 result = ccb->status_packet.hba_stat; 2355 cmd_arg = (caddr_t) ccb->result; 2356 2357 if (copyout((caddr_t) & result, cmd_arg, sizeof(result))) { 2358 dpt_Qpush_free(dpt, ccb); 2359 ccb->result = EFAULT; 2360 splx(ospl); 2361 wakeup(ccb); 2362 return; 2363 } 2364 /* Put the CCB back in the freelist */ 2365 ccb->state |= DPT_CCB_STATE_COMPLETED; 2366 dpt_Qpush_free(dpt, ccb); 2367 2368 /* Free allocated memory */ 2369 splx(ospl); 2370 return; 2371} 2372 2373#ifdef DPT_HANDLE_TIMEOUTS 2374/** 2375 * This function walks down the SUBMITTED queue. 2376 * Every request that is too old gets aborted and marked. 2377 * Since the DPT will complete (interrupt) immediately (what does that mean?), 2378 * We just walk the list, aborting old commands and marking them as such. 2379 * The dpt_complete function will get rid of the that were interrupted in the 2380 * normal manner. 2381 * 2382 * This function needs to run at splcam(), as it interacts with the submitted 2383 * queue, as well as the completed and free queues. Just like dpt_intr() does. 2384 * To run it at any ISPL other than that of dpt_intr(), will mean that dpt_intr 2385 * willbe able to pre-empt it, grab a transaction in progress (towards 2386 * destruction) and operate on it. The state of this transaction will be not 2387 * very clear. 2388 * The only other option, is to lock it only as long as necessary but have 2389 * dpt_intr() spin-wait on it. In a UP environment this makes no sense and in 2390 * a SMP environment, the advantage is dubvious for a function that runs once 2391 * every ten seconds for few microseconds and, on systems with healthy 2392 * hardware, does not do anything anyway. 2393 */ 2394 2395static void 2396dpt_handle_timeouts(dpt_softc_t * dpt) 2397{ 2398 dpt_ccb_t *ccb; 2399 int ospl; 2400 2401 ospl = splcam(); 2402 2403 if (dpt->state & DPT_HA_TIMEOUTS_ACTIVE) { 2404 printf("dpt%d WARNING: Timeout Handling Collision\n", 2405 dpt->unit); 2406 splx(ospl); 2407 return; 2408 } 2409 dpt->state |= DPT_HA_TIMEOUTS_ACTIVE; 2410 2411 /* Loop through the entire submitted queue, looking for lost souls */ 2412 for (ccb = TAILQ_FIRST(&dpt->submitted_ccbs); 2413 ccb != NULL; 2414 ccb = TAILQ_NEXT(ccb, links)) { 2415 struct scsi_xfer *xs; 2416 u_int32_t age, max_age; 2417 2418 xs = ccb->xs; 2419 age = dpt_time_delta(ccb->command_started, microtime_now); 2420 2421#define TenSec 10000000 2422 2423 if (xs == NULL) { /* Local, non-kernel call */ 2424 max_age = TenSec; 2425 } else { 2426 max_age = (((xs->timeout * (dpt->submitted_ccbs_count 2427 + DPT_TIMEOUT_FACTOR)) 2428 > TenSec) 2429 ? (xs->timeout * (dpt->submitted_ccbs_count 2430 + DPT_TIMEOUT_FACTOR)) 2431 : TenSec); 2432 } 2433 2434 /* 2435 * If a transaction is marked lost and is TWICE as old as we 2436 * care, then, and only then do we destroy it! 2437 */ 2438 if (ccb->state & DPT_CCB_STATE_MARKED_LOST) { 2439 /* Remember who is next */ 2440 if (age > (max_age * 2)) { 2441 dpt_Qremove_submitted(dpt, ccb); 2442 ccb->state &= ~DPT_CCB_STATE_MARKED_LOST; 2443 ccb->state |= DPT_CCB_STATE_ABORTED; 2444#define cmd_name scsi_cmd_name(ccb->eata_ccb.cp_scsi_cmd) 2445 if (ccb->retries++ > DPT_RETRIES) { 2446 printf("dpt%d ERROR: Destroying stale " 2447 "%d (%s)\n" 2448 " on " 2449 "c%db%dt%du%d (%d/%d)\n", 2450 dpt->unit, ccb->transaction_id, 2451 cmd_name, 2452 dpt->unit, 2453 ccb->eata_ccb.cp_channel, 2454 ccb->eata_ccb.cp_id, 2455 ccb->eata_ccb.cp_LUN, age, 2456 ccb->retries); 2457#define send_ccb &ccb->eata_ccb 2458#define ESA EATA_SPECIFIC_ABORT 2459 (void) dpt_send_immediate(dpt, 2460 send_ccb, 2461 ESA, 2462 0, 0); 2463 dpt_Qpush_free(dpt, ccb); 2464 2465 /* The SCSI layer should re-try */ 2466 xs->error |= XS_TIMEOUT; 2467 xs->flags |= SCSI_ITSDONE; 2468 scsi_done(xs); 2469 } else { 2470 printf("dpt%d ERROR: Stale %d (%s) on " 2471 "c%db%dt%du%d (%d)\n" 2472 " gets another " 2473 "chance(%d/%d)\n", 2474 dpt->unit, ccb->transaction_id, 2475 cmd_name, 2476 dpt->unit, 2477 ccb->eata_ccb.cp_channel, 2478 ccb->eata_ccb.cp_id, 2479 ccb->eata_ccb.cp_LUN, 2480 age, ccb->retries, DPT_RETRIES); 2481 2482 dpt_Qpush_waiting(dpt, ccb); 2483 dpt_sched_queue(dpt); 2484 } 2485 } 2486 } else { 2487 /* 2488 * This is a transaction that is not to be destroyed 2489 * (yet) But it is too old for our liking. We wait as 2490 * long as the upper layer thinks. Not really, we 2491 * multiply that by the number of commands in the 2492 * submitted queue + 1. 2493 */ 2494 if (!(ccb->state & DPT_CCB_STATE_MARKED_LOST) && 2495 (age != ~0) && (age > max_age)) { 2496 printf("dpt%d ERROR: Marking %d (%s) on " 2497 "c%db%dt%du%d \n" 2498 " as late after %dusec\n", 2499 dpt->unit, ccb->transaction_id, 2500 cmd_name, 2501 dpt->unit, ccb->eata_ccb.cp_channel, 2502 ccb->eata_ccb.cp_id, 2503 ccb->eata_ccb.cp_LUN, age); 2504 ccb->state |= DPT_CCB_STATE_MARKED_LOST; 2505 } 2506 } 2507 } 2508 2509 dpt->state &= ~DPT_HA_TIMEOUTS_ACTIVE; 2510 splx(ospl); 2511} 2512 2513static void 2514dpt_timeout(void *arg) 2515{ 2516 dpt_softc_t *dpt = (dpt_softc_t *) arg; 2517 2518 if (!(dpt->state & DPT_HA_TIMEOUTS_ACTIVE)) 2519 dpt_handle_timeouts(dpt); 2520 2521 timeout(dpt_timeout, (caddr_t) dpt, hz * 10); 2522} 2523 2524#endif /* DPT_HANDLE_TIMEOUTS */ 2525 2526#endif
|