1/* 2 * Product specific probe and attach routines for: 3 * Buslogic BT74x SCSI controllers 4 * 5 * Copyright (c) 1995, 1998, 1999 Justin T. Gibbs 6 * All rights reserved. 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions 10 * are met: 11 * 1. Redistributions of source code must retain the above copyright 12 * notice immediately at the beginning of the file, without modification, 13 * this list of conditions, and the following disclaimer. 14 * 2. The name of the author may not be used to endorse or promote products 15 * derived from this software without specific prior written permission. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 20 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR 21 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 27 * SUCH DAMAGE. 28 *
|
29 * $Id: bt_eisa.c,v 1.7 1999/05/08 21:59:18 dfr Exp $
|
29 * $Id: bt_eisa.c,v 1.8 1999/08/01 22:57:08 mdodd Exp $ |
30 */ 31 32#include "eisa.h" 33#if NEISA > 0 34 35#include <sys/param.h> 36#include <sys/systm.h> 37#include <sys/kernel.h> 38#include <sys/module.h> 39#include <sys/bus.h> 40 41#include <machine/bus_pio.h> 42#include <machine/bus.h> 43#include <machine/resource.h> 44#include <sys/rman.h> 45 46#include <i386/eisa/eisaconf.h> 47 48#include <dev/buslogic/btreg.h> 49 50#define EISA_DEVICE_ID_BUSLOGIC_74X_B 0x0ab34201 51#define EISA_DEVICE_ID_BUSLOGIC_74X_C 0x0ab34202 52#define EISA_DEVICE_ID_SDC3222F 0x0ab34781 53#define EISA_DEVICE_ID_AMI_4801 0x05a94801 54 55#define BT_IOSIZE 0x04 /* Move to central header */ 56#define BT_EISA_IOSIZE 0x100 57#define BT_EISA_SLOT_OFFSET 0xc00 58 59#define EISA_IOCONF 0x08C 60#define PORTADDR 0x07 61#define PORT_330 0x00 62#define PORT_334 0x01 63#define PORT_230 0x02 64#define PORT_234 0x03 65#define PORT_130 0x04 66#define PORT_134 0x05 67#define IRQ_CHANNEL 0xe0 68#define INT_11 0x40 69#define INT_10 0x20 70#define INT_15 0xa0 71#define INT_12 0x60 72#define INT_14 0x80 73#define INT_9 0x00 74 75#define EISA_IRQ_TYPE 0x08D 76#define LEVEL 0x40 77 78/* Definitions for the AMI Series 48 controler */ 79#define AMI_EISA_IOSIZE 0x500 /* Two separate ranges?? */ 80#define AMI_EISA_SLOT_OFFSET 0x800 81#define AMI_EISA_IOCONF 0x000 82#define AMI_DMA_CHANNEL 0x03 83#define AMI_IRQ_CHANNEL 0x1c 84#define AMI_INT_15 0x14 85#define AMI_INT_14 0x10 86#define AMI_INT_12 0x0c 87#define AMI_INT_11 0x00 88#define AMI_INT_10 0x08 89#define AMI_INT_9 0x04 90#define AMI_BIOS_ADDR 0xe0 91 92#define AMI_EISA_IOCONF1 0x001 93#define AMI_PORTADDR 0x0e 94#define AMI_PORT_334 0x08 95#define AMI_PORT_330 0x00 96#define AMI_PORT_234 0x0c 97#define AMI_PORT_230 0x04 98#define AMI_PORT_134 0x0a 99#define AMI_PORT_130 0x02 100#define AMI_IRQ_LEVEL 0x01 101 102 103#define AMI_MISC2_OPTIONS 0x49E 104#define AMI_ENABLE_ISA_DMA 0x08 105 106static const char *bt_match(eisa_id_t type); 107 108static int 109bt_eisa_alloc_resources(device_t dev) 110{ 111 struct bt_softc *bt = device_get_softc(dev); 112 int rid; 113 struct resource *port; 114 struct resource *irq; 115 int shared; 116 117 /* 118 * XXX assumes that the iospace ranges are sorted in increasing 119 * order. 120 */ 121 rid = 0; 122 port = bus_alloc_resource(dev, SYS_RES_IOPORT, &rid, 123 0, ~0, 1, RF_ACTIVE); 124 if (!port) 125 return (ENOMEM); 126 127 bt_init_softc(dev, port, 0, 0); 128 129 if (eisa_get_irq(dev) != -1) { 130 shared = bt->level_trigger_ints ? RF_SHAREABLE : 0; 131 rid = 0; 132 irq = bus_alloc_resource(dev, SYS_RES_IRQ, &rid, 133 0, ~0, 1, shared | RF_ACTIVE); 134 if (!irq) { 135 if (port) 136 bus_release_resource(dev, SYS_RES_IOPORT, 137 0, port); 138 return (ENOMEM); 139 } 140 } else 141 irq = 0; 142 bt->irq = irq; 143 144 return (0); 145} 146 147static void 148bt_eisa_release_resources(device_t dev) 149{ 150 struct bt_softc *bt = device_get_softc(dev); 151 152 if (bt->port) 153 bus_release_resource(dev, SYS_RES_IOPORT, 0, bt->port); 154 if (bt->irq) 155 bus_release_resource(dev, SYS_RES_IRQ, 0, bt->irq); 156 bt_free_softc(dev); 157} 158 159static const char* 160bt_match(eisa_id_t type) 161{ 162 switch(type) { 163 case EISA_DEVICE_ID_BUSLOGIC_74X_B: 164 return ("Buslogic 74xB SCSI host adapter"); 165 break; 166 case EISA_DEVICE_ID_BUSLOGIC_74X_C: 167 return ("Buslogic 74xC SCSI host adapter"); 168 break; 169 case EISA_DEVICE_ID_SDC3222F: 170 return ("Storage Dimensions SDC3222F SCSI host adapter"); 171 break; 172 case EISA_DEVICE_ID_AMI_4801: 173 return ("AMI Series 48 SCSI host adapter"); 174 break; 175 default: 176 break; 177 } 178 return (NULL); 179} 180 181static int 182bt_eisa_probe(device_t dev) 183{ 184 const char *desc; 185 u_long iobase; 186 struct bt_probe_info info; 187 u_long port; 188 u_long iosize; 189 u_int ioconf; 190 int result; 191 int shared; 192 193 desc = bt_match(eisa_get_id(dev)); 194 if (!desc) 195 return (ENXIO); 196 device_set_desc(dev, desc); 197 198 iobase = (eisa_get_slot(dev) * EISA_SLOT_SIZE); 199 if (eisa_get_id(dev) == EISA_DEVICE_ID_AMI_4801) { 200 u_int ioconf1; 201 202 iobase += AMI_EISA_SLOT_OFFSET; 203 iosize = AMI_EISA_IOSIZE; 204 ioconf1 = inb(iobase + AMI_EISA_IOCONF1); 205 /* Determine "ISA" I/O port */ 206 switch (ioconf1 & AMI_PORTADDR) { 207 case AMI_PORT_330: 208 port = 0x330; 209 break; 210 case AMI_PORT_334: 211 port = 0x334; 212 break; 213 case AMI_PORT_230: 214 port = 0x230; 215 break; 216 case AMI_PORT_234: 217 port = 0x234; 218 break; 219 case AMI_PORT_134: 220 port = 0x134; 221 break; 222 case AMI_PORT_130: 223 port = 0x130; 224 break; 225 default: 226 /* Disabled */ 227 printf("bt: AMI EISA Adapter at " 228 "slot %d has a disabled I/O " 229 "port. Cannot attach.\n", 230 eisa_get_slot(dev)); 231 return (ENXIO); 232 } 233 shared = (inb(iobase + AMI_EISA_IOCONF1) & AMI_IRQ_LEVEL) ? 234 EISA_TRIGGER_LEVEL : EISA_TRIGGER_EDGE; 235 } else { 236 iobase += BT_EISA_SLOT_OFFSET; 237 iosize = BT_EISA_IOSIZE; 238 239 ioconf = inb(iobase + EISA_IOCONF); 240 /* Determine "ISA" I/O port */ 241 switch (ioconf & PORTADDR) { 242 case PORT_330: 243 port = 0x330; 244 break; 245 case PORT_334: 246 port = 0x334; 247 break; 248 case PORT_230: 249 port = 0x230; 250 break; 251 case PORT_234: 252 port = 0x234; 253 break; 254 case PORT_130: 255 port = 0x130; 256 break; 257 case PORT_134: 258 port = 0x134; 259 break; 260 default: 261 /* Disabled */ 262 printf("bt: Buslogic EISA Adapter at " 263 "slot %d has a disabled I/O " 264 "port. Cannot attach.\n", 265 eisa_get_slot(dev)); 266 return (ENXIO); 267 } 268 shared = (inb(iobase + EISA_IRQ_TYPE) & LEVEL) ? 269 EISA_TRIGGER_LEVEL : EISA_TRIGGER_EDGE; 270 } 271 bt_mark_probed_iop(port); 272 273 /* Tell parent where our resources are going to be */ 274 eisa_add_iospace(dev, iobase, iosize, RESVADDR_NONE); 275 eisa_add_iospace(dev, port, BT_IOSIZE, RESVADDR_NONE); 276 277 /* And allocate them */ 278 bt_eisa_alloc_resources(dev); 279 280 if (bt_port_probe(dev, &info) != 0) { 281 printf("bt_eisa_probe: Probe failed for " 282 "card at slot 0x%x\n", eisa_get_slot(dev)); 283 result = ENXIO; 284 } else { 285 eisa_add_intr(dev, info.irq, shared); 286 result = 0; 287 } 288 bt_eisa_release_resources(dev); 289 290 return (result); 291} 292 293static int 294bt_eisa_attach(device_t dev) 295{ 296 struct bt_softc *bt = device_get_softc(dev); 297 298 /* Allocate resources */ 299 bt_eisa_alloc_resources(dev); 300 301 /* Allocate a dmatag for our SCB DMA maps */ 302 /* XXX Should be a child of the PCI bus dma tag */
|
303 if (bus_dma_tag_create(/*parent*/NULL, /*alignment*/0, /*boundary*/0,
|
303 if (bus_dma_tag_create(/*parent*/NULL, /*alignment*/1, /*boundary*/0, |
304 /*lowaddr*/BUS_SPACE_MAXADDR_32BIT, 305 /*highaddr*/BUS_SPACE_MAXADDR, 306 /*filter*/NULL, /*filterarg*/NULL, 307 /*maxsize*/BUS_SPACE_MAXSIZE_32BIT, 308 /*nsegments*/BUS_SPACE_UNRESTRICTED, 309 /*maxsegsz*/BUS_SPACE_MAXSIZE_32BIT, 310 /*flags*/0, &bt->parent_dmat) != 0) { 311 bt_eisa_release_resources(dev); 312 return -1; 313 } 314 315 /* 316 * Now that we know we own the resources we need, do the full 317 * card initialization. 318 */ 319 if (bt_probe(dev) || bt_fetch_adapter_info(dev) || bt_init(dev)) { 320 bt_eisa_release_resources(dev); 321 return -1; 322 } 323 324 /* Attach sub-devices - always succeeds (sets up intr) */ 325 bt_attach(dev); 326 327 return 0; 328} 329 330static device_method_t bt_eisa_methods[] = { 331 /* Device interface */ 332 DEVMETHOD(device_probe, bt_eisa_probe), 333 DEVMETHOD(device_attach, bt_eisa_attach), 334 335 { 0, 0 } 336}; 337 338static driver_t bt_eisa_driver = { 339 "bt", 340 bt_eisa_methods, 341 sizeof(struct bt_softc), 342}; 343 344static devclass_t bt_devclass; 345 346DRIVER_MODULE(bt, eisa, bt_eisa_driver, bt_devclass, 0, 0); 347 348#endif /* NEISA > 0 */
|