1/*- 2 * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer, 10 * without modification. 11 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 12 * similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any 13 * redistribution must be conditioned upon including a substantially 14 * similar Disclaimer requirement for further binary redistribution. 15 * 3. Neither the names of the above-listed copyright holders nor the names 16 * of any contributors may be used to endorse or promote products derived 17 * from this software without specific prior written permission. 18 * 19 * Alternatively, this software may be distributed under the terms of the 20 * GNU General Public License ("GPL") version 2 as published by the Free 21 * Software Foundation. 22 * 23 * NO WARRANTY 24 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 25 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 26 * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY 27 * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL 28 * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, 29 * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 30 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 31 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER 32 * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 33 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 34 * THE POSSIBILITY OF SUCH DAMAGES. 35 */ 36 37#include <sys/cdefs.h>
|
38__FBSDID("$FreeBSD: head/sys/dev/ath/if_ath.c 155491 2006-02-09 21:48:51Z sam $");
|
38__FBSDID("$FreeBSD: head/sys/dev/ath/if_ath.c 155492 2006-02-09 22:03:26Z sam $"); |
39 40/* 41 * Driver for the Atheros Wireless LAN controller. 42 * 43 * This software is derived from work of Atsushi Onoe; his contribution 44 * is greatly appreciated. 45 */ 46 47#include "opt_inet.h" 48 49#include <sys/param.h> 50#include <sys/systm.h> 51#include <sys/sysctl.h> 52#include <sys/mbuf.h> 53#include <sys/malloc.h> 54#include <sys/lock.h> 55#include <sys/mutex.h> 56#include <sys/kernel.h> 57#include <sys/socket.h> 58#include <sys/sockio.h> 59#include <sys/errno.h> 60#include <sys/callout.h> 61#include <sys/bus.h> 62#include <sys/endian.h> 63#include <sys/kthread.h> 64#include <sys/taskqueue.h> 65 66#include <machine/bus.h> 67 68#include <net/if.h> 69#include <net/if_dl.h> 70#include <net/if_media.h> 71#include <net/if_types.h> 72#include <net/if_arp.h> 73#include <net/ethernet.h> 74#include <net/if_llc.h> 75 76#include <net80211/ieee80211_var.h> 77 78#include <net/bpf.h> 79 80#ifdef INET 81#include <netinet/in.h> 82#include <netinet/if_ether.h> 83#endif 84 85#define AR_DEBUG 86#include <dev/ath/if_athvar.h> 87#include <contrib/dev/ath/ah_desc.h> 88#include <contrib/dev/ath/ah_devid.h> /* XXX for softled */ 89 90#ifdef ATH_TX99_DIAG 91#include <dev/ath/ath_tx99/ath_tx99.h> 92#endif 93 94/* unaligned little endian access */ 95#define LE_READ_2(p) \ 96 ((u_int16_t) \ 97 ((((u_int8_t *)(p))[0] ) | (((u_int8_t *)(p))[1] << 8))) 98#define LE_READ_4(p) \ 99 ((u_int32_t) \ 100 ((((u_int8_t *)(p))[0] ) | (((u_int8_t *)(p))[1] << 8) | \ 101 (((u_int8_t *)(p))[2] << 16) | (((u_int8_t *)(p))[3] << 24))) 102 103enum { 104 ATH_LED_TX, 105 ATH_LED_RX, 106 ATH_LED_POLL, 107}; 108 109static void ath_init(void *); 110static void ath_stop_locked(struct ifnet *); 111static void ath_stop(struct ifnet *); 112static void ath_start(struct ifnet *); 113static int ath_reset(struct ifnet *); 114static int ath_media_change(struct ifnet *); 115static void ath_watchdog(struct ifnet *); 116static int ath_ioctl(struct ifnet *, u_long, caddr_t); 117static void ath_fatal_proc(void *, int); 118static void ath_rxorn_proc(void *, int); 119static void ath_bmiss_proc(void *, int); 120static int ath_key_alloc(struct ieee80211com *, 121 const struct ieee80211_key *, 122 ieee80211_keyix *, ieee80211_keyix *); 123static int ath_key_delete(struct ieee80211com *, 124 const struct ieee80211_key *); 125static int ath_key_set(struct ieee80211com *, const struct ieee80211_key *, 126 const u_int8_t mac[IEEE80211_ADDR_LEN]); 127static void ath_key_update_begin(struct ieee80211com *); 128static void ath_key_update_end(struct ieee80211com *); 129static void ath_mode_init(struct ath_softc *); 130static void ath_setslottime(struct ath_softc *); 131static void ath_updateslot(struct ifnet *); 132static int ath_beaconq_setup(struct ath_hal *); 133static int ath_beacon_alloc(struct ath_softc *, struct ieee80211_node *); 134static void ath_beacon_setup(struct ath_softc *, struct ath_buf *); 135static void ath_beacon_proc(void *, int); 136static void ath_bstuck_proc(void *, int); 137static void ath_beacon_free(struct ath_softc *); 138static void ath_beacon_config(struct ath_softc *); 139static void ath_descdma_cleanup(struct ath_softc *sc, 140 struct ath_descdma *, ath_bufhead *); 141static int ath_desc_alloc(struct ath_softc *); 142static void ath_desc_free(struct ath_softc *); 143static struct ieee80211_node *ath_node_alloc(struct ieee80211_node_table *); 144static void ath_node_free(struct ieee80211_node *); 145static u_int8_t ath_node_getrssi(const struct ieee80211_node *); 146static int ath_rxbuf_init(struct ath_softc *, struct ath_buf *); 147static void ath_recv_mgmt(struct ieee80211com *ic, struct mbuf *m, 148 struct ieee80211_node *ni, 149 int subtype, int rssi, u_int32_t rstamp); 150static void ath_setdefantenna(struct ath_softc *, u_int); 151static void ath_rx_proc(void *, int); 152static struct ath_txq *ath_txq_setup(struct ath_softc*, int qtype, int subtype); 153static int ath_tx_setup(struct ath_softc *, int, int); 154static int ath_wme_update(struct ieee80211com *); 155static void ath_tx_cleanupq(struct ath_softc *, struct ath_txq *); 156static void ath_tx_cleanup(struct ath_softc *); 157static int ath_tx_start(struct ath_softc *, struct ieee80211_node *, 158 struct ath_buf *, struct mbuf *); 159static void ath_tx_proc_q0(void *, int); 160static void ath_tx_proc_q0123(void *, int); 161static void ath_tx_proc(void *, int); 162static int ath_chan_set(struct ath_softc *, struct ieee80211_channel *); 163static void ath_draintxq(struct ath_softc *); 164static void ath_stoprecv(struct ath_softc *); 165static int ath_startrecv(struct ath_softc *); 166static void ath_chan_change(struct ath_softc *, struct ieee80211_channel *); 167static void ath_next_scan(void *); 168static void ath_calibrate(void *); 169static int ath_newstate(struct ieee80211com *, enum ieee80211_state, int); 170static void ath_setup_stationkey(struct ieee80211_node *); 171static void ath_newassoc(struct ieee80211_node *, int); 172static int ath_getchannels(struct ath_softc *, u_int cc, 173 HAL_BOOL outdoor, HAL_BOOL xchanmode); 174static void ath_led_event(struct ath_softc *, int); 175static void ath_update_txpow(struct ath_softc *); 176 177static int ath_rate_setup(struct ath_softc *, u_int mode); 178static void ath_setcurmode(struct ath_softc *, enum ieee80211_phymode); 179 180static void ath_sysctlattach(struct ath_softc *); 181static void ath_bpfattach(struct ath_softc *); 182static void ath_announce(struct ath_softc *); 183 184SYSCTL_DECL(_hw_ath); 185 186/* XXX validate sysctl values */ 187static int ath_dwelltime = 200; /* 5 channels/second */ 188SYSCTL_INT(_hw_ath, OID_AUTO, dwell, CTLFLAG_RW, &ath_dwelltime, 189 0, "channel dwell time (ms) for AP/station scanning"); 190static int ath_calinterval = 30; /* calibrate every 30 secs */ 191SYSCTL_INT(_hw_ath, OID_AUTO, calibrate, CTLFLAG_RW, &ath_calinterval, 192 0, "chip calibration interval (secs)"); 193static int ath_outdoor = AH_TRUE; /* outdoor operation */ 194SYSCTL_INT(_hw_ath, OID_AUTO, outdoor, CTLFLAG_RD, &ath_outdoor, 195 0, "outdoor operation"); 196TUNABLE_INT("hw.ath.outdoor", &ath_outdoor); 197static int ath_xchanmode = AH_TRUE; /* extended channel use */ 198SYSCTL_INT(_hw_ath, OID_AUTO, xchanmode, CTLFLAG_RD, &ath_xchanmode, 199 0, "extended channel mode"); 200TUNABLE_INT("hw.ath.xchanmode", &ath_xchanmode); 201static int ath_countrycode = CTRY_DEFAULT; /* country code */ 202SYSCTL_INT(_hw_ath, OID_AUTO, countrycode, CTLFLAG_RD, &ath_countrycode, 203 0, "country code"); 204TUNABLE_INT("hw.ath.countrycode", &ath_countrycode); 205static int ath_regdomain = 0; /* regulatory domain */ 206SYSCTL_INT(_hw_ath, OID_AUTO, regdomain, CTLFLAG_RD, &ath_regdomain, 207 0, "regulatory domain"); 208 209static int ath_rxbuf = ATH_RXBUF; /* # rx buffers to allocate */ 210SYSCTL_INT(_hw_ath, OID_AUTO, rxbuf, CTLFLAG_RD, &ath_rxbuf, 211 0, "rx buffers allocated"); 212TUNABLE_INT("hw.ath.rxbuf", &ath_rxbuf); 213static int ath_txbuf = ATH_TXBUF; /* # tx buffers to allocate */ 214SYSCTL_INT(_hw_ath, OID_AUTO, txbuf, CTLFLAG_RD, &ath_txbuf, 215 0, "tx buffers allocated"); 216TUNABLE_INT("hw.ath.txbuf", &ath_txbuf); 217 218#ifdef AR_DEBUG 219static int ath_debug = 0; 220SYSCTL_INT(_hw_ath, OID_AUTO, debug, CTLFLAG_RW, &ath_debug, 221 0, "control debugging printfs"); 222TUNABLE_INT("hw.ath.debug", &ath_debug); 223enum { 224 ATH_DEBUG_XMIT = 0x00000001, /* basic xmit operation */ 225 ATH_DEBUG_XMIT_DESC = 0x00000002, /* xmit descriptors */ 226 ATH_DEBUG_RECV = 0x00000004, /* basic recv operation */ 227 ATH_DEBUG_RECV_DESC = 0x00000008, /* recv descriptors */ 228 ATH_DEBUG_RATE = 0x00000010, /* rate control */ 229 ATH_DEBUG_RESET = 0x00000020, /* reset processing */ 230 ATH_DEBUG_MODE = 0x00000040, /* mode init/setup */ 231 ATH_DEBUG_BEACON = 0x00000080, /* beacon handling */ 232 ATH_DEBUG_WATCHDOG = 0x00000100, /* watchdog timeout */ 233 ATH_DEBUG_INTR = 0x00001000, /* ISR */ 234 ATH_DEBUG_TX_PROC = 0x00002000, /* tx ISR proc */ 235 ATH_DEBUG_RX_PROC = 0x00004000, /* rx ISR proc */ 236 ATH_DEBUG_BEACON_PROC = 0x00008000, /* beacon ISR proc */ 237 ATH_DEBUG_CALIBRATE = 0x00010000, /* periodic calibration */ 238 ATH_DEBUG_KEYCACHE = 0x00020000, /* key cache management */ 239 ATH_DEBUG_STATE = 0x00040000, /* 802.11 state transitions */ 240 ATH_DEBUG_NODE = 0x00080000, /* node management */ 241 ATH_DEBUG_LED = 0x00100000, /* led management */ 242 ATH_DEBUG_FATAL = 0x80000000, /* fatal errors */ 243 ATH_DEBUG_ANY = 0xffffffff 244}; 245#define IFF_DUMPPKTS(sc, m) \ 246 ((sc->sc_debug & (m)) || \ 247 (sc->sc_ifp->if_flags & (IFF_DEBUG|IFF_LINK2)) == (IFF_DEBUG|IFF_LINK2)) 248#define DPRINTF(sc, m, fmt, ...) do { \ 249 if (sc->sc_debug & (m)) \ 250 printf(fmt, __VA_ARGS__); \ 251} while (0) 252#define KEYPRINTF(sc, ix, hk, mac) do { \ 253 if (sc->sc_debug & ATH_DEBUG_KEYCACHE) \ 254 ath_keyprint(__func__, ix, hk, mac); \ 255} while (0) 256static void ath_printrxbuf(struct ath_buf *bf, int); 257static void ath_printtxbuf(struct ath_buf *bf, int); 258#else 259#define IFF_DUMPPKTS(sc, m) \ 260 ((sc->sc_ifp->if_flags & (IFF_DEBUG|IFF_LINK2)) == (IFF_DEBUG|IFF_LINK2)) 261#define DPRINTF(m, fmt, ...) 262#define KEYPRINTF(sc, k, ix, mac) 263#endif 264 265MALLOC_DEFINE(M_ATHDEV, "athdev", "ath driver dma buffers"); 266 267int 268ath_attach(u_int16_t devid, struct ath_softc *sc) 269{ 270 struct ifnet *ifp; 271 struct ieee80211com *ic = &sc->sc_ic; 272 struct ath_hal *ah = NULL; 273 HAL_STATUS status; 274 int error = 0, i; 275 276 DPRINTF(sc, ATH_DEBUG_ANY, "%s: devid 0x%x\n", __func__, devid); 277 278 ifp = sc->sc_ifp = if_alloc(IFT_ETHER); 279 if (ifp == NULL) { 280 device_printf(sc->sc_dev, "can not if_alloc()\n"); 281 error = ENOSPC; 282 goto bad; 283 } 284 285 /* set these up early for if_printf use */ 286 if_initname(ifp, device_get_name(sc->sc_dev), 287 device_get_unit(sc->sc_dev)); 288 289 ah = ath_hal_attach(devid, sc, sc->sc_st, sc->sc_sh, &status); 290 if (ah == NULL) { 291 if_printf(ifp, "unable to attach hardware; HAL status %u\n", 292 status); 293 error = ENXIO; 294 goto bad; 295 } 296 if (ah->ah_abi != HAL_ABI_VERSION) { 297 if_printf(ifp, "HAL ABI mismatch detected " 298 "(HAL:0x%x != driver:0x%x)\n", 299 ah->ah_abi, HAL_ABI_VERSION); 300 error = ENXIO; 301 goto bad; 302 } 303 sc->sc_ah = ah; 304 sc->sc_invalid = 0; /* ready to go, enable interrupt handling */ 305 306 /* 307 * Check if the MAC has multi-rate retry support. 308 * We do this by trying to setup a fake extended 309 * descriptor. MAC's that don't have support will 310 * return false w/o doing anything. MAC's that do 311 * support it will return true w/o doing anything. 312 */ 313 sc->sc_mrretry = ath_hal_setupxtxdesc(ah, NULL, 0,0, 0,0, 0,0); 314 315 /* 316 * Check if the device has hardware counters for PHY 317 * errors. If so we need to enable the MIB interrupt 318 * so we can act on stat triggers. 319 */ 320 if (ath_hal_hwphycounters(ah)) 321 sc->sc_needmib = 1; 322 323 /* 324 * Get the hardware key cache size. 325 */ 326 sc->sc_keymax = ath_hal_keycachesize(ah); 327 if (sc->sc_keymax > ATH_KEYMAX) { 328 if_printf(ifp, "Warning, using only %u of %u key cache slots\n", 329 ATH_KEYMAX, sc->sc_keymax); 330 sc->sc_keymax = ATH_KEYMAX; 331 } 332 /* 333 * Reset the key cache since some parts do not 334 * reset the contents on initial power up. 335 */ 336 for (i = 0; i < sc->sc_keymax; i++) 337 ath_hal_keyreset(ah, i); 338 /* 339 * Mark key cache slots associated with global keys 340 * as in use. If we knew TKIP was not to be used we 341 * could leave the +32, +64, and +32+64 slots free. 342 * XXX only for splitmic. 343 */ 344 for (i = 0; i < IEEE80211_WEP_NKID; i++) { 345 setbit(sc->sc_keymap, i); 346 setbit(sc->sc_keymap, i+32); 347 setbit(sc->sc_keymap, i+64); 348 setbit(sc->sc_keymap, i+32+64); 349 } 350 351 /* 352 * Collect the channel list using the default country 353 * code and including outdoor channels. The 802.11 layer 354 * is resposible for filtering this list based on settings 355 * like the phy mode. 356 */ 357 error = ath_getchannels(sc, ath_countrycode, 358 ath_outdoor, ath_xchanmode); 359 if (error != 0) 360 goto bad; 361 362 /* 363 * Setup rate tables for all potential media types. 364 */ 365 ath_rate_setup(sc, IEEE80211_MODE_11A); 366 ath_rate_setup(sc, IEEE80211_MODE_11B); 367 ath_rate_setup(sc, IEEE80211_MODE_11G); 368 ath_rate_setup(sc, IEEE80211_MODE_TURBO_A); 369 ath_rate_setup(sc, IEEE80211_MODE_TURBO_G); 370 /* NB: setup here so ath_rate_update is happy */ 371 ath_setcurmode(sc, IEEE80211_MODE_11A); 372 373 /* 374 * Allocate tx+rx descriptors and populate the lists. 375 */ 376 error = ath_desc_alloc(sc); 377 if (error != 0) { 378 if_printf(ifp, "failed to allocate descriptors: %d\n", error); 379 goto bad; 380 } 381 callout_init(&sc->sc_scan_ch, debug_mpsafenet ? CALLOUT_MPSAFE : 0); 382 callout_init(&sc->sc_cal_ch, CALLOUT_MPSAFE); 383 384 ATH_TXBUF_LOCK_INIT(sc); 385 386 sc->sc_tq = taskqueue_create("ath_taskq", M_NOWAIT, 387 taskqueue_thread_enqueue, &sc->sc_tq); 388 taskqueue_start_threads(&sc->sc_tq, 1, PI_NET, 389 "%s taskq", ifp->if_xname); 390 391 TASK_INIT(&sc->sc_rxtask, 0, ath_rx_proc, sc); 392 TASK_INIT(&sc->sc_rxorntask, 0, ath_rxorn_proc, sc); 393 TASK_INIT(&sc->sc_fataltask, 0, ath_fatal_proc, sc); 394 TASK_INIT(&sc->sc_bmisstask, 0, ath_bmiss_proc, sc); 395 TASK_INIT(&sc->sc_bstucktask, 0, ath_bstuck_proc, sc); 396 397 /* 398 * Allocate hardware transmit queues: one queue for 399 * beacon frames and one data queue for each QoS 400 * priority. Note that the hal handles reseting 401 * these queues at the needed time. 402 * 403 * XXX PS-Poll 404 */ 405 sc->sc_bhalq = ath_beaconq_setup(ah); 406 if (sc->sc_bhalq == (u_int) -1) { 407 if_printf(ifp, "unable to setup a beacon xmit queue!\n"); 408 error = EIO; 409 goto bad2; 410 } 411 sc->sc_cabq = ath_txq_setup(sc, HAL_TX_QUEUE_CAB, 0); 412 if (sc->sc_cabq == NULL) { 413 if_printf(ifp, "unable to setup CAB xmit queue!\n"); 414 error = EIO; 415 goto bad2; 416 } 417 /* NB: insure BK queue is the lowest priority h/w queue */ 418 if (!ath_tx_setup(sc, WME_AC_BK, HAL_WME_AC_BK)) { 419 if_printf(ifp, "unable to setup xmit queue for %s traffic!\n", 420 ieee80211_wme_acnames[WME_AC_BK]); 421 error = EIO; 422 goto bad2; 423 } 424 if (!ath_tx_setup(sc, WME_AC_BE, HAL_WME_AC_BE) || 425 !ath_tx_setup(sc, WME_AC_VI, HAL_WME_AC_VI) || 426 !ath_tx_setup(sc, WME_AC_VO, HAL_WME_AC_VO)) { 427 /* 428 * Not enough hardware tx queues to properly do WME; 429 * just punt and assign them all to the same h/w queue. 430 * We could do a better job of this if, for example, 431 * we allocate queues when we switch from station to 432 * AP mode. 433 */ 434 if (sc->sc_ac2q[WME_AC_VI] != NULL) 435 ath_tx_cleanupq(sc, sc->sc_ac2q[WME_AC_VI]); 436 if (sc->sc_ac2q[WME_AC_BE] != NULL) 437 ath_tx_cleanupq(sc, sc->sc_ac2q[WME_AC_BE]); 438 sc->sc_ac2q[WME_AC_BE] = sc->sc_ac2q[WME_AC_BK]; 439 sc->sc_ac2q[WME_AC_VI] = sc->sc_ac2q[WME_AC_BK]; 440 sc->sc_ac2q[WME_AC_VO] = sc->sc_ac2q[WME_AC_BK]; 441 } 442 443 /* 444 * Special case certain configurations. Note the 445 * CAB queue is handled by these specially so don't 446 * include them when checking the txq setup mask. 447 */ 448 switch (sc->sc_txqsetup &~ (1<<sc->sc_cabq->axq_qnum)) { 449 case 0x01: 450 TASK_INIT(&sc->sc_txtask, 0, ath_tx_proc_q0, sc); 451 break; 452 case 0x0f: 453 TASK_INIT(&sc->sc_txtask, 0, ath_tx_proc_q0123, sc); 454 break; 455 default: 456 TASK_INIT(&sc->sc_txtask, 0, ath_tx_proc, sc); 457 break; 458 } 459 460 /* 461 * Setup rate control. Some rate control modules 462 * call back to change the anntena state so expose 463 * the necessary entry points. 464 * XXX maybe belongs in struct ath_ratectrl? 465 */ 466 sc->sc_setdefantenna = ath_setdefantenna; 467 sc->sc_rc = ath_rate_attach(sc); 468 if (sc->sc_rc == NULL) { 469 error = EIO; 470 goto bad2; 471 } 472 473 sc->sc_blinking = 0; 474 sc->sc_ledstate = 1; 475 sc->sc_ledon = 0; /* low true */ 476 sc->sc_ledidle = (2700*hz)/1000; /* 2.7sec */ 477 callout_init(&sc->sc_ledtimer, CALLOUT_MPSAFE); 478 /* 479 * Auto-enable soft led processing for IBM cards and for 480 * 5211 minipci cards. Users can also manually enable/disable 481 * support with a sysctl. 482 */ 483 sc->sc_softled = (devid == AR5212_DEVID_IBM || devid == AR5211_DEVID); 484 if (sc->sc_softled) { 485 ath_hal_gpioCfgOutput(ah, sc->sc_ledpin); 486 ath_hal_gpioset(ah, sc->sc_ledpin, !sc->sc_ledon); 487 } 488 489 ifp->if_softc = sc; 490 ifp->if_flags = IFF_SIMPLEX | IFF_BROADCAST | IFF_MULTICAST; 491 ifp->if_start = ath_start; 492 ifp->if_watchdog = ath_watchdog; 493 ifp->if_ioctl = ath_ioctl; 494 ifp->if_init = ath_init; 495 IFQ_SET_MAXLEN(&ifp->if_snd, IFQ_MAXLEN); 496 ifp->if_snd.ifq_drv_maxlen = IFQ_MAXLEN; 497 IFQ_SET_READY(&ifp->if_snd); 498 499 ic->ic_ifp = ifp; 500 ic->ic_reset = ath_reset; 501 ic->ic_newassoc = ath_newassoc; 502 ic->ic_updateslot = ath_updateslot; 503 ic->ic_wme.wme_update = ath_wme_update; 504 /* XXX not right but it's not used anywhere important */ 505 ic->ic_phytype = IEEE80211_T_OFDM; 506 ic->ic_opmode = IEEE80211_M_STA; 507 ic->ic_caps = 508 IEEE80211_C_IBSS /* ibss, nee adhoc, mode */ 509 | IEEE80211_C_HOSTAP /* hostap mode */ 510 | IEEE80211_C_MONITOR /* monitor mode */ 511 | IEEE80211_C_AHDEMO /* adhoc demo mode */ 512 | IEEE80211_C_SHPREAMBLE /* short preamble supported */ 513 | IEEE80211_C_SHSLOT /* short slot time supported */ 514 | IEEE80211_C_WPA /* capable of WPA1+WPA2 */ 515 ; 516 /* 517 * Query the hal to figure out h/w crypto support. 518 */ 519 if (ath_hal_ciphersupported(ah, HAL_CIPHER_WEP)) 520 ic->ic_caps |= IEEE80211_C_WEP; 521 if (ath_hal_ciphersupported(ah, HAL_CIPHER_AES_OCB)) 522 ic->ic_caps |= IEEE80211_C_AES; 523 if (ath_hal_ciphersupported(ah, HAL_CIPHER_AES_CCM)) 524 ic->ic_caps |= IEEE80211_C_AES_CCM; 525 if (ath_hal_ciphersupported(ah, HAL_CIPHER_CKIP)) 526 ic->ic_caps |= IEEE80211_C_CKIP; 527 if (ath_hal_ciphersupported(ah, HAL_CIPHER_TKIP)) { 528 ic->ic_caps |= IEEE80211_C_TKIP; 529 /* 530 * Check if h/w does the MIC and/or whether the 531 * separate key cache entries are required to 532 * handle both tx+rx MIC keys. 533 */ 534 if (ath_hal_ciphersupported(ah, HAL_CIPHER_MIC)) 535 ic->ic_caps |= IEEE80211_C_TKIPMIC; 536 if (ath_hal_tkipsplit(ah)) 537 sc->sc_splitmic = 1; 538 } 539 sc->sc_hasclrkey = ath_hal_ciphersupported(ah, HAL_CIPHER_CLR); 540 sc->sc_mcastkey = ath_hal_getmcastkeysearch(ah); 541 /* 542 * TPC support can be done either with a global cap or 543 * per-packet support. The latter is not available on 544 * all parts. We're a bit pedantic here as all parts 545 * support a global cap. 546 */ 547 if (ath_hal_hastpc(ah) || ath_hal_hastxpowlimit(ah)) 548 ic->ic_caps |= IEEE80211_C_TXPMGT; 549 550 /* 551 * Mark WME capability only if we have sufficient 552 * hardware queues to do proper priority scheduling. 553 */ 554 if (sc->sc_ac2q[WME_AC_BE] != sc->sc_ac2q[WME_AC_BK]) 555 ic->ic_caps |= IEEE80211_C_WME; 556 /* 557 * Check for misc other capabilities. 558 */ 559 if (ath_hal_hasbursting(ah)) 560 ic->ic_caps |= IEEE80211_C_BURST; 561 562 /* 563 * Indicate we need the 802.11 header padded to a 564 * 32-bit boundary for 4-address and QoS frames. 565 */ 566 ic->ic_flags |= IEEE80211_F_DATAPAD; 567 568 /* 569 * Query the hal about antenna support. 570 */ 571 sc->sc_defant = ath_hal_getdefantenna(ah); 572 573 /* 574 * Not all chips have the VEOL support we want to 575 * use with IBSS beacons; check here for it. 576 */ 577 sc->sc_hasveol = ath_hal_hasveol(ah); 578 579 /* get mac address from hardware */ 580 ath_hal_getmac(ah, ic->ic_myaddr); 581 582 /* call MI attach routine. */ 583 ieee80211_ifattach(ic); 584 sc->sc_opmode = ic->ic_opmode; 585 /* override default methods */ 586 ic->ic_node_alloc = ath_node_alloc; 587 sc->sc_node_free = ic->ic_node_free; 588 ic->ic_node_free = ath_node_free; 589 ic->ic_node_getrssi = ath_node_getrssi; 590 sc->sc_recv_mgmt = ic->ic_recv_mgmt; 591 ic->ic_recv_mgmt = ath_recv_mgmt; 592 sc->sc_newstate = ic->ic_newstate; 593 ic->ic_newstate = ath_newstate; 594 ic->ic_crypto.cs_max_keyix = sc->sc_keymax; 595 ic->ic_crypto.cs_key_alloc = ath_key_alloc; 596 ic->ic_crypto.cs_key_delete = ath_key_delete; 597 ic->ic_crypto.cs_key_set = ath_key_set; 598 ic->ic_crypto.cs_key_update_begin = ath_key_update_begin; 599 ic->ic_crypto.cs_key_update_end = ath_key_update_end; 600 /* complete initialization */ 601 ieee80211_media_init(ic, ath_media_change, ieee80211_media_status); 602 603 ath_bpfattach(sc); 604 /* 605 * Setup dynamic sysctl's now that country code and 606 * regdomain are available from the hal. 607 */ 608 ath_sysctlattach(sc); 609 610 if (bootverbose) 611 ieee80211_announce(ic); 612 ath_announce(sc); 613 return 0; 614bad2: 615 ath_tx_cleanup(sc); 616 ath_desc_free(sc); 617bad: 618 if (ah) 619 ath_hal_detach(ah); 620 if (ifp != NULL) 621 if_free(ifp); 622 sc->sc_invalid = 1; 623 return error; 624} 625 626int 627ath_detach(struct ath_softc *sc) 628{ 629 struct ifnet *ifp = sc->sc_ifp; 630 631 DPRINTF(sc, ATH_DEBUG_ANY, "%s: if_flags %x\n", 632 __func__, ifp->if_flags); 633 634 ath_stop(ifp); 635 bpfdetach(ifp); 636 /* 637 * NB: the order of these is important: 638 * o call the 802.11 layer before detaching the hal to 639 * insure callbacks into the driver to delete global 640 * key cache entries can be handled 641 * o reclaim the tx queue data structures after calling 642 * the 802.11 layer as we'll get called back to reclaim 643 * node state and potentially want to use them 644 * o to cleanup the tx queues the hal is called, so detach 645 * it last 646 * Other than that, it's straightforward... 647 */ 648 ieee80211_ifdetach(&sc->sc_ic); 649#ifdef ATH_TX99_DIAG 650 if (sc->sc_tx99 != NULL) 651 sc->sc_tx99->detach(sc->sc_tx99); 652#endif 653 taskqueue_free(sc->sc_tq); 654 ath_rate_detach(sc->sc_rc); 655 ath_desc_free(sc); 656 ath_tx_cleanup(sc); 657 ath_hal_detach(sc->sc_ah); 658 if_free(ifp); 659 660 return 0; 661} 662 663void 664ath_suspend(struct ath_softc *sc) 665{ 666 struct ifnet *ifp = sc->sc_ifp; 667 668 DPRINTF(sc, ATH_DEBUG_ANY, "%s: if_flags %x\n", 669 __func__, ifp->if_flags); 670 671 ath_stop(ifp); 672} 673 674void 675ath_resume(struct ath_softc *sc) 676{ 677 struct ifnet *ifp = sc->sc_ifp; 678 679 DPRINTF(sc, ATH_DEBUG_ANY, "%s: if_flags %x\n", 680 __func__, ifp->if_flags); 681 682 if (ifp->if_flags & IFF_UP) { 683 ath_init(sc); 684 if (ifp->if_drv_flags & IFF_DRV_RUNNING) 685 ath_start(ifp); 686 } 687 if (sc->sc_softled) { 688 ath_hal_gpioCfgOutput(sc->sc_ah, sc->sc_ledpin); 689 ath_hal_gpioset(sc->sc_ah, sc->sc_ledpin, !sc->sc_ledon); 690 } 691} 692 693void 694ath_shutdown(struct ath_softc *sc) 695{ 696 struct ifnet *ifp = sc->sc_ifp; 697 698 DPRINTF(sc, ATH_DEBUG_ANY, "%s: if_flags %x\n", 699 __func__, ifp->if_flags); 700 701 ath_stop(ifp); 702} 703 704/* 705 * Interrupt handler. Most of the actual processing is deferred. 706 */ 707void 708ath_intr(void *arg) 709{ 710 struct ath_softc *sc = arg; 711 struct ifnet *ifp = sc->sc_ifp; 712 struct ath_hal *ah = sc->sc_ah; 713 HAL_INT status; 714 715 if (sc->sc_invalid) { 716 /* 717 * The hardware is not ready/present, don't touch anything. 718 * Note this can happen early on if the IRQ is shared. 719 */ 720 DPRINTF(sc, ATH_DEBUG_ANY, "%s: invalid; ignored\n", __func__); 721 return; 722 } 723 if (!ath_hal_intrpend(ah)) /* shared irq, not for us */ 724 return; 725 if (!((ifp->if_flags & IFF_UP) && (ifp->if_drv_flags & 726 IFF_DRV_RUNNING))) { 727 DPRINTF(sc, ATH_DEBUG_ANY, "%s: if_flags 0x%x\n", 728 __func__, ifp->if_flags); 729 ath_hal_getisr(ah, &status); /* clear ISR */ 730 ath_hal_intrset(ah, 0); /* disable further intr's */ 731 return; 732 } 733 /* 734 * Figure out the reason(s) for the interrupt. Note 735 * that the hal returns a pseudo-ISR that may include 736 * bits we haven't explicitly enabled so we mask the 737 * value to insure we only process bits we requested. 738 */ 739 ath_hal_getisr(ah, &status); /* NB: clears ISR too */ 740 DPRINTF(sc, ATH_DEBUG_INTR, "%s: status 0x%x\n", __func__, status); 741 status &= sc->sc_imask; /* discard unasked for bits */ 742 if (status & HAL_INT_FATAL) { 743 /* 744 * Fatal errors are unrecoverable. Typically 745 * these are caused by DMA errors. Unfortunately 746 * the exact reason is not (presently) returned 747 * by the hal. 748 */ 749 sc->sc_stats.ast_hardware++; 750 ath_hal_intrset(ah, 0); /* disable intr's until reset */ 751 taskqueue_enqueue(sc->sc_tq, &sc->sc_fataltask); 752 } else if (status & HAL_INT_RXORN) { 753 sc->sc_stats.ast_rxorn++; 754 ath_hal_intrset(ah, 0); /* disable intr's until reset */ 755 taskqueue_enqueue(sc->sc_tq, &sc->sc_rxorntask); 756 } else { 757 if (status & HAL_INT_SWBA) { 758 /* 759 * Software beacon alert--time to send a beacon. 760 * Handle beacon transmission directly; deferring 761 * this is too slow to meet timing constraints 762 * under load. 763 */ 764 ath_beacon_proc(sc, 0); 765 } 766 if (status & HAL_INT_RXEOL) { 767 /* 768 * NB: the hardware should re-read the link when 769 * RXE bit is written, but it doesn't work at 770 * least on older hardware revs. 771 */ 772 sc->sc_stats.ast_rxeol++; 773 sc->sc_rxlink = NULL; 774 } 775 if (status & HAL_INT_TXURN) { 776 sc->sc_stats.ast_txurn++; 777 /* bump tx trigger level */ 778 ath_hal_updatetxtriglevel(ah, AH_TRUE); 779 } 780 if (status & HAL_INT_RX) 781 taskqueue_enqueue(sc->sc_tq, &sc->sc_rxtask); 782 if (status & HAL_INT_TX) 783 taskqueue_enqueue(sc->sc_tq, &sc->sc_txtask); 784 if (status & HAL_INT_BMISS) { 785 sc->sc_stats.ast_bmiss++; 786 taskqueue_enqueue(sc->sc_tq, &sc->sc_bmisstask); 787 } 788 if (status & HAL_INT_MIB) { 789 sc->sc_stats.ast_mib++; 790 /* 791 * Disable interrupts until we service the MIB 792 * interrupt; otherwise it will continue to fire. 793 */ 794 ath_hal_intrset(ah, 0); 795 /* 796 * Let the hal handle the event. We assume it will 797 * clear whatever condition caused the interrupt. 798 */ 799 ath_hal_mibevent(ah, &sc->sc_halstats); 800 ath_hal_intrset(ah, sc->sc_imask); 801 } 802 } 803} 804 805static void 806ath_fatal_proc(void *arg, int pending) 807{ 808 struct ath_softc *sc = arg; 809 struct ifnet *ifp = sc->sc_ifp; 810 811 if_printf(ifp, "hardware error; resetting\n"); 812 ath_reset(ifp); 813} 814 815static void 816ath_rxorn_proc(void *arg, int pending) 817{ 818 struct ath_softc *sc = arg; 819 struct ifnet *ifp = sc->sc_ifp; 820 821 if_printf(ifp, "rx FIFO overrun; resetting\n"); 822 ath_reset(ifp); 823} 824 825static void 826ath_bmiss_proc(void *arg, int pending) 827{ 828 struct ath_softc *sc = arg; 829 struct ieee80211com *ic = &sc->sc_ic; 830 831 DPRINTF(sc, ATH_DEBUG_ANY, "%s: pending %u\n", __func__, pending); 832 KASSERT(ic->ic_opmode == IEEE80211_M_STA, 833 ("unexpect operating mode %u", ic->ic_opmode)); 834 if (ic->ic_state == IEEE80211_S_RUN) {
|
835 u_int64_t lastrx = sc->sc_lastrx; 836 u_int64_t tsf = ath_hal_gettsf64(sc->sc_ah); 837 u_int bmisstimeout = 838 ic->ic_bmissthreshold * ic->ic_bss->ni_intval * 1024; 839 840 DPRINTF(sc, ATH_DEBUG_BEACON, 841 "%s: tsf %llu lastrx %lld (%llu) bmiss %u\n", 842 __func__, (unsigned long long) tsf, 843 (unsigned long long)(tsf - lastrx), 844 (unsigned long long) lastrx, bmisstimeout); |
845 /*
|
836 * Rather than go directly to scan state, try to
837 * reassociate first. If that fails then the state
838 * machine will drop us into scanning after timing
839 * out waiting for a probe response.
|
846 * Workaround phantom bmiss interrupts by sanity-checking 847 * the time of our last rx'd frame. If it is within the 848 * beacon miss interval then ignore the interrupt. If it's 849 * truly a bmiss we'll get another interrupt soon and that'll 850 * be dispatched up for processing. |
851 */
|
841 NET_LOCK_GIANT();
842 ieee80211_new_state(ic, IEEE80211_S_ASSOC, -1);
843 NET_UNLOCK_GIANT();
|
852 if (tsf - lastrx > bmisstimeout) { 853 NET_LOCK_GIANT(); 854 ieee80211_beacon_miss(ic); 855 NET_UNLOCK_GIANT(); 856 } else 857 sc->sc_stats.ast_bmiss_phantom++; |
858 } 859} 860 861static u_int 862ath_chan2flags(struct ieee80211com *ic, struct ieee80211_channel *chan) 863{ 864#define N(a) (sizeof(a) / sizeof(a[0])) 865 static const u_int modeflags[] = { 866 0, /* IEEE80211_MODE_AUTO */ 867 CHANNEL_A, /* IEEE80211_MODE_11A */ 868 CHANNEL_B, /* IEEE80211_MODE_11B */ 869 CHANNEL_PUREG, /* IEEE80211_MODE_11G */ 870 0, /* IEEE80211_MODE_FH */ 871 CHANNEL_T, /* IEEE80211_MODE_TURBO_A */ 872 CHANNEL_108G /* IEEE80211_MODE_TURBO_G */ 873 }; 874 enum ieee80211_phymode mode = ieee80211_chan2mode(ic, chan); 875 876 KASSERT(mode < N(modeflags), ("unexpected phy mode %u", mode)); 877 KASSERT(modeflags[mode] != 0, ("mode %u undefined", mode)); 878 return modeflags[mode]; 879#undef N 880} 881 882static void 883ath_init(void *arg) 884{ 885 struct ath_softc *sc = (struct ath_softc *) arg; 886 struct ieee80211com *ic = &sc->sc_ic; 887 struct ifnet *ifp = sc->sc_ifp; 888 struct ath_hal *ah = sc->sc_ah; 889 HAL_STATUS status; 890 891 DPRINTF(sc, ATH_DEBUG_ANY, "%s: if_flags 0x%x\n", 892 __func__, ifp->if_flags); 893 894 ATH_LOCK(sc); 895 /* 896 * Stop anything previously setup. This is safe 897 * whether this is the first time through or not. 898 */ 899 ath_stop_locked(ifp); 900 901 /* 902 * The basic interface to setting the hardware in a good 903 * state is ``reset''. On return the hardware is known to 904 * be powered up and with interrupts disabled. This must 905 * be followed by initialization of the appropriate bits 906 * and then setup of the interrupt mask. 907 */ 908 sc->sc_curchan.channel = ic->ic_curchan->ic_freq; 909 sc->sc_curchan.channelFlags = ath_chan2flags(ic, ic->ic_curchan); 910 if (!ath_hal_reset(ah, sc->sc_opmode, &sc->sc_curchan, AH_FALSE, &status)) { 911 if_printf(ifp, "unable to reset hardware; hal status %u\n", 912 status); 913 goto done; 914 } 915 916 /* 917 * This is needed only to setup initial state 918 * but it's best done after a reset. 919 */ 920 ath_update_txpow(sc); 921 /* 922 * Likewise this is set during reset so update 923 * state cached in the driver. 924 */ 925 sc->sc_diversity = ath_hal_getdiversity(ah); 926 927 /* 928 * Setup the hardware after reset: the key cache 929 * is filled as needed and the receive engine is 930 * set going. Frame transmit is handled entirely 931 * in the frame output path; there's nothing to do 932 * here except setup the interrupt mask. 933 */ 934 if (ath_startrecv(sc) != 0) { 935 if_printf(ifp, "unable to start recv logic\n"); 936 goto done; 937 } 938 939 /* 940 * Enable interrupts. 941 */ 942 sc->sc_imask = HAL_INT_RX | HAL_INT_TX 943 | HAL_INT_RXEOL | HAL_INT_RXORN 944 | HAL_INT_FATAL | HAL_INT_GLOBAL; 945 /* 946 * Enable MIB interrupts when there are hardware phy counters. 947 * Note we only do this (at the moment) for station mode. 948 */ 949 if (sc->sc_needmib && ic->ic_opmode == IEEE80211_M_STA) 950 sc->sc_imask |= HAL_INT_MIB; 951 ath_hal_intrset(ah, sc->sc_imask); 952 953 ifp->if_drv_flags |= IFF_DRV_RUNNING; 954 ic->ic_state = IEEE80211_S_INIT; 955 956 /* 957 * The hardware should be ready to go now so it's safe 958 * to kick the 802.11 state machine as it's likely to 959 * immediately call back to us to send mgmt frames. 960 */ 961 ath_chan_change(sc, ic->ic_curchan); 962#ifdef ATH_TX99_DIAG 963 if (sc->sc_tx99 != NULL) 964 sc->sc_tx99->start(sc->sc_tx99); 965 else 966#endif 967 if (ic->ic_opmode != IEEE80211_M_MONITOR) { 968 if (ic->ic_roaming != IEEE80211_ROAMING_MANUAL) 969 ieee80211_new_state(ic, IEEE80211_S_SCAN, -1); 970 } else 971 ieee80211_new_state(ic, IEEE80211_S_RUN, -1); 972done: 973 ATH_UNLOCK(sc); 974} 975 976static void 977ath_stop_locked(struct ifnet *ifp) 978{ 979 struct ath_softc *sc = ifp->if_softc; 980 struct ieee80211com *ic = &sc->sc_ic; 981 struct ath_hal *ah = sc->sc_ah; 982 983 DPRINTF(sc, ATH_DEBUG_ANY, "%s: invalid %u if_flags 0x%x\n", 984 __func__, sc->sc_invalid, ifp->if_flags); 985 986 ATH_LOCK_ASSERT(sc); 987 if (ifp->if_drv_flags & IFF_DRV_RUNNING) { 988 /* 989 * Shutdown the hardware and driver: 990 * reset 802.11 state machine 991 * turn off timers 992 * disable interrupts 993 * turn off the radio 994 * clear transmit machinery 995 * clear receive machinery 996 * drain and release tx queues 997 * reclaim beacon resources 998 * power down hardware 999 * 1000 * Note that some of this work is not possible if the 1001 * hardware is gone (invalid). 1002 */ 1003#ifdef ATH_TX99_DIAG 1004 if (sc->sc_tx99 != NULL) 1005 sc->sc_tx99->stop(sc->sc_tx99); 1006#endif 1007 ieee80211_new_state(ic, IEEE80211_S_INIT, -1); 1008 ifp->if_drv_flags &= ~IFF_DRV_RUNNING; 1009 ifp->if_timer = 0; 1010 if (!sc->sc_invalid) { 1011 if (sc->sc_softled) { 1012 callout_stop(&sc->sc_ledtimer); 1013 ath_hal_gpioset(ah, sc->sc_ledpin, 1014 !sc->sc_ledon); 1015 sc->sc_blinking = 0; 1016 } 1017 ath_hal_intrset(ah, 0); 1018 } 1019 ath_draintxq(sc); 1020 if (!sc->sc_invalid) { 1021 ath_stoprecv(sc); 1022 ath_hal_phydisable(ah); 1023 } else 1024 sc->sc_rxlink = NULL; 1025 IFQ_DRV_PURGE(&ifp->if_snd); 1026 ath_beacon_free(sc); 1027 } 1028} 1029 1030static void 1031ath_stop(struct ifnet *ifp) 1032{ 1033 struct ath_softc *sc = ifp->if_softc; 1034 1035 ATH_LOCK(sc); 1036 ath_stop_locked(ifp); 1037 if (!sc->sc_invalid) { 1038 /* 1039 * Set the chip in full sleep mode. Note that we are 1040 * careful to do this only when bringing the interface 1041 * completely to a stop. When the chip is in this state 1042 * it must be carefully woken up or references to 1043 * registers in the PCI clock domain may freeze the bus 1044 * (and system). This varies by chip and is mostly an 1045 * issue with newer parts that go to sleep more quickly. 1046 */ 1047 ath_hal_setpower(sc->sc_ah, HAL_PM_FULL_SLEEP, 0); 1048 } 1049 ATH_UNLOCK(sc); 1050} 1051 1052/* 1053 * Reset the hardware w/o losing operational state. This is 1054 * basically a more efficient way of doing ath_stop, ath_init, 1055 * followed by state transitions to the current 802.11 1056 * operational state. Used to recover from various errors and 1057 * to reset or reload hardware state. 1058 */ 1059static int 1060ath_reset(struct ifnet *ifp) 1061{ 1062 struct ath_softc *sc = ifp->if_softc; 1063 struct ieee80211com *ic = &sc->sc_ic; 1064 struct ath_hal *ah = sc->sc_ah; 1065 struct ieee80211_channel *c; 1066 HAL_STATUS status; 1067 1068 /* 1069 * Convert to a HAL channel description with the flags 1070 * constrained to reflect the current operating mode. 1071 */ 1072 c = ic->ic_curchan; 1073 sc->sc_curchan.channel = c->ic_freq; 1074 sc->sc_curchan.channelFlags = ath_chan2flags(ic, c); 1075 1076 ath_hal_intrset(ah, 0); /* disable interrupts */ 1077 ath_draintxq(sc); /* stop xmit side */ 1078 ath_stoprecv(sc); /* stop recv side */ 1079 /* NB: indicate channel change so we do a full reset */ 1080 if (!ath_hal_reset(ah, sc->sc_opmode, &sc->sc_curchan, AH_TRUE, &status)) 1081 if_printf(ifp, "%s: unable to reset hardware; hal status %u\n", 1082 __func__, status); 1083 ath_update_txpow(sc); /* update tx power state */ 1084 sc->sc_diversity = ath_hal_getdiversity(ah); 1085 if (ath_startrecv(sc) != 0) /* restart recv */ 1086 if_printf(ifp, "%s: unable to start recv logic\n", __func__); 1087 /* 1088 * We may be doing a reset in response to an ioctl 1089 * that changes the channel so update any state that 1090 * might change as a result. 1091 */ 1092 ath_chan_change(sc, c); 1093 if (ic->ic_state == IEEE80211_S_RUN) 1094 ath_beacon_config(sc); /* restart beacons */ 1095 ath_hal_intrset(ah, sc->sc_imask); 1096 1097 ath_start(ifp); /* restart xmit */ 1098 return 0; 1099} 1100 1101static void 1102ath_start(struct ifnet *ifp) 1103{ 1104 struct ath_softc *sc = ifp->if_softc; 1105 struct ath_hal *ah = sc->sc_ah; 1106 struct ieee80211com *ic = &sc->sc_ic; 1107 struct ieee80211_node *ni; 1108 struct ath_buf *bf; 1109 struct mbuf *m; 1110 struct ieee80211_frame *wh; 1111 struct ether_header *eh; 1112 1113 if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0 || sc->sc_invalid) 1114 return; 1115 for (;;) { 1116 /* 1117 * Grab a TX buffer and associated resources. 1118 */ 1119 ATH_TXBUF_LOCK(sc); 1120 bf = STAILQ_FIRST(&sc->sc_txbuf); 1121 if (bf != NULL) 1122 STAILQ_REMOVE_HEAD(&sc->sc_txbuf, bf_list); 1123 ATH_TXBUF_UNLOCK(sc); 1124 if (bf == NULL) { 1125 DPRINTF(sc, ATH_DEBUG_ANY, "%s: out of xmit buffers\n", 1126 __func__); 1127 sc->sc_stats.ast_tx_qstop++; 1128 ifp->if_drv_flags |= IFF_DRV_OACTIVE; 1129 break; 1130 } 1131 /* 1132 * Poll the management queue for frames; they 1133 * have priority over normal data frames. 1134 */ 1135 IF_DEQUEUE(&ic->ic_mgtq, m); 1136 if (m == NULL) { 1137 /* 1138 * No data frames go out unless we're associated. 1139 */ 1140 if (ic->ic_state != IEEE80211_S_RUN) { 1141 DPRINTF(sc, ATH_DEBUG_ANY, 1142 "%s: ignore data packet, state %u\n", 1143 __func__, ic->ic_state); 1144 sc->sc_stats.ast_tx_discard++; 1145 ATH_TXBUF_LOCK(sc); 1146 STAILQ_INSERT_TAIL(&sc->sc_txbuf, bf, bf_list); 1147 ATH_TXBUF_UNLOCK(sc); 1148 break; 1149 } 1150 IFQ_DRV_DEQUEUE(&ifp->if_snd, m); /* XXX: LOCK */ 1151 if (m == NULL) { 1152 ATH_TXBUF_LOCK(sc); 1153 STAILQ_INSERT_TAIL(&sc->sc_txbuf, bf, bf_list); 1154 ATH_TXBUF_UNLOCK(sc); 1155 break; 1156 } 1157 /* 1158 * Find the node for the destination so we can do 1159 * things like power save and fast frames aggregation. 1160 */ 1161 if (m->m_len < sizeof(struct ether_header) && 1162 (m = m_pullup(m, sizeof(struct ether_header))) == NULL) { 1163 ic->ic_stats.is_tx_nobuf++; /* XXX */ 1164 ni = NULL; 1165 goto bad; 1166 } 1167 eh = mtod(m, struct ether_header *); 1168 ni = ieee80211_find_txnode(ic, eh->ether_dhost); 1169 if (ni == NULL) { 1170 /* NB: ieee80211_find_txnode does stat+msg */ 1171 m_freem(m); 1172 goto bad; 1173 } 1174 if ((ni->ni_flags & IEEE80211_NODE_PWR_MGT) && 1175 (m->m_flags & M_PWR_SAV) == 0) { 1176 /* 1177 * Station in power save mode; pass the frame 1178 * to the 802.11 layer and continue. We'll get 1179 * the frame back when the time is right. 1180 */ 1181 ieee80211_pwrsave(ic, ni, m); 1182 goto reclaim; 1183 } 1184 /* calculate priority so we can find the tx queue */ 1185 if (ieee80211_classify(ic, m, ni)) { 1186 DPRINTF(sc, ATH_DEBUG_XMIT, 1187 "%s: discard, classification failure\n", 1188 __func__); 1189 m_freem(m); 1190 goto bad; 1191 } 1192 ifp->if_opackets++; 1193 BPF_MTAP(ifp, m); 1194 /* 1195 * Encapsulate the packet in prep for transmission. 1196 */ 1197 m = ieee80211_encap(ic, m, ni); 1198 if (m == NULL) { 1199 DPRINTF(sc, ATH_DEBUG_ANY, 1200 "%s: encapsulation failure\n", 1201 __func__); 1202 sc->sc_stats.ast_tx_encap++; 1203 goto bad; 1204 } 1205 } else { 1206 /* 1207 * Hack! The referenced node pointer is in the 1208 * rcvif field of the packet header. This is 1209 * placed there by ieee80211_mgmt_output because 1210 * we need to hold the reference with the frame 1211 * and there's no other way (other than packet 1212 * tags which we consider too expensive to use) 1213 * to pass it along. 1214 */ 1215 ni = (struct ieee80211_node *) m->m_pkthdr.rcvif; 1216 m->m_pkthdr.rcvif = NULL; 1217 1218 wh = mtod(m, struct ieee80211_frame *); 1219 if ((wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK) == 1220 IEEE80211_FC0_SUBTYPE_PROBE_RESP) { 1221 /* fill time stamp */ 1222 u_int64_t tsf; 1223 u_int32_t *tstamp; 1224 1225 tsf = ath_hal_gettsf64(ah); 1226 /* XXX: adjust 100us delay to xmit */ 1227 tsf += 100; 1228 tstamp = (u_int32_t *)&wh[1]; 1229 tstamp[0] = htole32(tsf & 0xffffffff); 1230 tstamp[1] = htole32(tsf >> 32); 1231 } 1232 sc->sc_stats.ast_tx_mgmt++; 1233 } 1234 1235 if (ath_tx_start(sc, ni, bf, m)) { 1236 bad: 1237 ifp->if_oerrors++; 1238 reclaim: 1239 ATH_TXBUF_LOCK(sc); 1240 STAILQ_INSERT_TAIL(&sc->sc_txbuf, bf, bf_list); 1241 ATH_TXBUF_UNLOCK(sc); 1242 if (ni != NULL) 1243 ieee80211_free_node(ni); 1244 continue; 1245 } 1246 1247 sc->sc_tx_timer = 5; 1248 ifp->if_timer = 1; 1249 } 1250} 1251 1252static int 1253ath_media_change(struct ifnet *ifp) 1254{ 1255#define IS_UP(ifp) \ 1256 ((ifp->if_flags & IFF_UP) && (ifp->if_drv_flags & IFF_DRV_RUNNING)) 1257 int error; 1258 1259 error = ieee80211_media_change(ifp); 1260 if (error == ENETRESET) { 1261 struct ath_softc *sc = ifp->if_softc; 1262 struct ieee80211com *ic = &sc->sc_ic; 1263 1264 if (ic->ic_opmode == IEEE80211_M_AHDEMO) { 1265 /* 1266 * Adhoc demo mode is just ibss mode w/o beacons 1267 * (mostly). The hal knows nothing about it; 1268 * tell it we're operating in ibss mode. 1269 */ 1270 sc->sc_opmode = HAL_M_IBSS; 1271 } else 1272 sc->sc_opmode = ic->ic_opmode; 1273 if (IS_UP(ifp)) 1274 ath_init(ifp->if_softc); /* XXX lose error */ 1275 error = 0; 1276 } 1277 return error; 1278#undef IS_UP 1279} 1280 1281#ifdef AR_DEBUG 1282static void 1283ath_keyprint(const char *tag, u_int ix, 1284 const HAL_KEYVAL *hk, const u_int8_t mac[IEEE80211_ADDR_LEN]) 1285{ 1286 static const char *ciphers[] = { 1287 "WEP", 1288 "AES-OCB", 1289 "AES-CCM", 1290 "CKIP", 1291 "TKIP", 1292 "CLR", 1293 }; 1294 int i, n; 1295 1296 printf("%s: [%02u] %-7s ", tag, ix, ciphers[hk->kv_type]); 1297 for (i = 0, n = hk->kv_len; i < n; i++) 1298 printf("%02x", hk->kv_val[i]); 1299 printf(" mac %s", ether_sprintf(mac)); 1300 if (hk->kv_type == HAL_CIPHER_TKIP) { 1301 printf(" mic "); 1302 for (i = 0; i < sizeof(hk->kv_mic); i++) 1303 printf("%02x", hk->kv_mic[i]); 1304 } 1305 printf("\n"); 1306} 1307#endif 1308 1309/* 1310 * Set a TKIP key into the hardware. This handles the 1311 * potential distribution of key state to multiple key 1312 * cache slots for TKIP. 1313 */ 1314static int 1315ath_keyset_tkip(struct ath_softc *sc, const struct ieee80211_key *k, 1316 HAL_KEYVAL *hk, const u_int8_t mac[IEEE80211_ADDR_LEN]) 1317{ 1318#define IEEE80211_KEY_XR (IEEE80211_KEY_XMIT | IEEE80211_KEY_RECV) 1319 static const u_int8_t zerobssid[IEEE80211_ADDR_LEN]; 1320 struct ath_hal *ah = sc->sc_ah; 1321 1322 KASSERT(k->wk_cipher->ic_cipher == IEEE80211_CIPHER_TKIP, 1323 ("got a non-TKIP key, cipher %u", k->wk_cipher->ic_cipher)); 1324 KASSERT(sc->sc_splitmic, ("key cache !split")); 1325 if ((k->wk_flags & IEEE80211_KEY_XR) == IEEE80211_KEY_XR) { 1326 /* 1327 * TX key goes at first index, RX key at the rx index. 1328 * The hal handles the MIC keys at index+64. 1329 */ 1330 memcpy(hk->kv_mic, k->wk_txmic, sizeof(hk->kv_mic)); 1331 KEYPRINTF(sc, k->wk_keyix, hk, zerobssid); 1332 if (!ath_hal_keyset(ah, k->wk_keyix, hk, zerobssid)) 1333 return 0; 1334 1335 memcpy(hk->kv_mic, k->wk_rxmic, sizeof(hk->kv_mic)); 1336 KEYPRINTF(sc, k->wk_keyix+32, hk, mac); 1337 /* XXX delete tx key on failure? */ 1338 return ath_hal_keyset(ah, k->wk_keyix+32, hk, mac); 1339 } else if (k->wk_flags & IEEE80211_KEY_XR) { 1340 /* 1341 * TX/RX key goes at first index. 1342 * The hal handles the MIC keys are index+64. 1343 */ 1344 memcpy(hk->kv_mic, k->wk_flags & IEEE80211_KEY_XMIT ? 1345 k->wk_txmic : k->wk_rxmic, sizeof(hk->kv_mic)); 1346 KEYPRINTF(sc, k->wk_keyix, hk, mac); 1347 return ath_hal_keyset(ah, k->wk_keyix, hk, mac); 1348 } 1349 return 0; 1350#undef IEEE80211_KEY_XR 1351} 1352 1353/* 1354 * Set a net80211 key into the hardware. This handles the 1355 * potential distribution of key state to multiple key 1356 * cache slots for TKIP with hardware MIC support. 1357 */ 1358static int 1359ath_keyset(struct ath_softc *sc, const struct ieee80211_key *k, 1360 const u_int8_t mac0[IEEE80211_ADDR_LEN], 1361 struct ieee80211_node *bss) 1362{ 1363#define N(a) (sizeof(a)/sizeof(a[0])) 1364 static const u_int8_t ciphermap[] = { 1365 HAL_CIPHER_WEP, /* IEEE80211_CIPHER_WEP */ 1366 HAL_CIPHER_TKIP, /* IEEE80211_CIPHER_TKIP */ 1367 HAL_CIPHER_AES_OCB, /* IEEE80211_CIPHER_AES_OCB */ 1368 HAL_CIPHER_AES_CCM, /* IEEE80211_CIPHER_AES_CCM */ 1369 (u_int8_t) -1, /* 4 is not allocated */ 1370 HAL_CIPHER_CKIP, /* IEEE80211_CIPHER_CKIP */ 1371 HAL_CIPHER_CLR, /* IEEE80211_CIPHER_NONE */ 1372 }; 1373 struct ath_hal *ah = sc->sc_ah; 1374 const struct ieee80211_cipher *cip = k->wk_cipher; 1375 u_int8_t gmac[IEEE80211_ADDR_LEN]; 1376 const u_int8_t *mac; 1377 HAL_KEYVAL hk; 1378 1379 memset(&hk, 0, sizeof(hk)); 1380 /* 1381 * Software crypto uses a "clear key" so non-crypto 1382 * state kept in the key cache are maintained and 1383 * so that rx frames have an entry to match. 1384 */ 1385 if ((k->wk_flags & IEEE80211_KEY_SWCRYPT) == 0) { 1386 KASSERT(cip->ic_cipher < N(ciphermap), 1387 ("invalid cipher type %u", cip->ic_cipher)); 1388 hk.kv_type = ciphermap[cip->ic_cipher]; 1389 hk.kv_len = k->wk_keylen; 1390 memcpy(hk.kv_val, k->wk_key, k->wk_keylen); 1391 } else 1392 hk.kv_type = HAL_CIPHER_CLR; 1393 1394 if ((k->wk_flags & IEEE80211_KEY_GROUP) && sc->sc_mcastkey) { 1395 /* 1396 * Group keys on hardware that supports multicast frame 1397 * key search use a mac that is the sender's address with 1398 * the high bit set instead of the app-specified address. 1399 */ 1400 IEEE80211_ADDR_COPY(gmac, bss->ni_macaddr); 1401 gmac[0] |= 0x80; 1402 mac = gmac; 1403 } else 1404 mac = mac0; 1405 1406 if (hk.kv_type == HAL_CIPHER_TKIP && 1407 (k->wk_flags & IEEE80211_KEY_SWMIC) == 0 && 1408 sc->sc_splitmic) { 1409 return ath_keyset_tkip(sc, k, &hk, mac); 1410 } else { 1411 KEYPRINTF(sc, k->wk_keyix, &hk, mac); 1412 return ath_hal_keyset(ah, k->wk_keyix, &hk, mac); 1413 } 1414#undef N 1415} 1416 1417/* 1418 * Allocate tx/rx key slots for TKIP. We allocate two slots for 1419 * each key, one for decrypt/encrypt and the other for the MIC. 1420 */ 1421static u_int16_t 1422key_alloc_2pair(struct ath_softc *sc, 1423 ieee80211_keyix *txkeyix, ieee80211_keyix *rxkeyix) 1424{ 1425#define N(a) (sizeof(a)/sizeof(a[0])) 1426 u_int i, keyix; 1427 1428 KASSERT(sc->sc_splitmic, ("key cache !split")); 1429 /* XXX could optimize */ 1430 for (i = 0; i < N(sc->sc_keymap)/4; i++) { 1431 u_int8_t b = sc->sc_keymap[i]; 1432 if (b != 0xff) { 1433 /* 1434 * One or more slots in this byte are free. 1435 */ 1436 keyix = i*NBBY; 1437 while (b & 1) { 1438 again: 1439 keyix++; 1440 b >>= 1; 1441 } 1442 /* XXX IEEE80211_KEY_XMIT | IEEE80211_KEY_RECV */ 1443 if (isset(sc->sc_keymap, keyix+32) || 1444 isset(sc->sc_keymap, keyix+64) || 1445 isset(sc->sc_keymap, keyix+32+64)) { 1446 /* full pair unavailable */ 1447 /* XXX statistic */ 1448 if (keyix == (i+1)*NBBY) { 1449 /* no slots were appropriate, advance */ 1450 continue; 1451 } 1452 goto again; 1453 } 1454 setbit(sc->sc_keymap, keyix); 1455 setbit(sc->sc_keymap, keyix+64); 1456 setbit(sc->sc_keymap, keyix+32); 1457 setbit(sc->sc_keymap, keyix+32+64); 1458 DPRINTF(sc, ATH_DEBUG_KEYCACHE, 1459 "%s: key pair %u,%u %u,%u\n", 1460 __func__, keyix, keyix+64, 1461 keyix+32, keyix+32+64); 1462 *txkeyix = keyix; 1463 *rxkeyix = keyix+32; 1464 return 1; 1465 } 1466 } 1467 DPRINTF(sc, ATH_DEBUG_KEYCACHE, "%s: out of pair space\n", __func__); 1468 return 0; 1469#undef N 1470} 1471 1472/* 1473 * Allocate a single key cache slot. 1474 */ 1475static int 1476key_alloc_single(struct ath_softc *sc, 1477 ieee80211_keyix *txkeyix, ieee80211_keyix *rxkeyix) 1478{ 1479#define N(a) (sizeof(a)/sizeof(a[0])) 1480 u_int i, keyix; 1481 1482 /* XXX try i,i+32,i+64,i+32+64 to minimize key pair conflicts */ 1483 for (i = 0; i < N(sc->sc_keymap); i++) { 1484 u_int8_t b = sc->sc_keymap[i]; 1485 if (b != 0xff) { 1486 /* 1487 * One or more slots are free. 1488 */ 1489 keyix = i*NBBY; 1490 while (b & 1) 1491 keyix++, b >>= 1; 1492 setbit(sc->sc_keymap, keyix); 1493 DPRINTF(sc, ATH_DEBUG_KEYCACHE, "%s: key %u\n", 1494 __func__, keyix); 1495 *txkeyix = *rxkeyix = keyix; 1496 return 1; 1497 } 1498 } 1499 DPRINTF(sc, ATH_DEBUG_KEYCACHE, "%s: out of space\n", __func__); 1500 return 0; 1501#undef N 1502} 1503 1504/* 1505 * Allocate one or more key cache slots for a uniacst key. The 1506 * key itself is needed only to identify the cipher. For hardware 1507 * TKIP with split cipher+MIC keys we allocate two key cache slot 1508 * pairs so that we can setup separate TX and RX MIC keys. Note 1509 * that the MIC key for a TKIP key at slot i is assumed by the 1510 * hardware to be at slot i+64. This limits TKIP keys to the first 1511 * 64 entries. 1512 */ 1513static int 1514ath_key_alloc(struct ieee80211com *ic, const struct ieee80211_key *k, 1515 ieee80211_keyix *keyix, ieee80211_keyix *rxkeyix) 1516{ 1517 struct ath_softc *sc = ic->ic_ifp->if_softc; 1518 1519 /* 1520 * Group key allocation must be handled specially for 1521 * parts that do not support multicast key cache search 1522 * functionality. For those parts the key id must match 1523 * the h/w key index so lookups find the right key. On 1524 * parts w/ the key search facility we install the sender's 1525 * mac address (with the high bit set) and let the hardware 1526 * find the key w/o using the key id. This is preferred as 1527 * it permits us to support multiple users for adhoc and/or 1528 * multi-station operation. 1529 */ 1530 if ((k->wk_flags & IEEE80211_KEY_GROUP) && !sc->sc_mcastkey) { 1531 if (!(&ic->ic_nw_keys[0] <= k && 1532 k < &ic->ic_nw_keys[IEEE80211_WEP_NKID])) { 1533 /* should not happen */ 1534 DPRINTF(sc, ATH_DEBUG_KEYCACHE, 1535 "%s: bogus group key\n", __func__); 1536 return 0; 1537 } 1538 /* 1539 * XXX we pre-allocate the global keys so 1540 * have no way to check if they've already been allocated. 1541 */ 1542 *keyix = *rxkeyix = k - ic->ic_nw_keys; 1543 return 1; 1544 } 1545 1546 /* 1547 * We allocate two pair for TKIP when using the h/w to do 1548 * the MIC. For everything else, including software crypto, 1549 * we allocate a single entry. Note that s/w crypto requires 1550 * a pass-through slot on the 5211 and 5212. The 5210 does 1551 * not support pass-through cache entries and we map all 1552 * those requests to slot 0. 1553 */ 1554 if (k->wk_flags & IEEE80211_KEY_SWCRYPT) { 1555 return key_alloc_single(sc, keyix, rxkeyix); 1556 } else if (k->wk_cipher->ic_cipher == IEEE80211_CIPHER_TKIP && 1557 (k->wk_flags & IEEE80211_KEY_SWMIC) == 0 && sc->sc_splitmic) { 1558 return key_alloc_2pair(sc, keyix, rxkeyix); 1559 } else { 1560 return key_alloc_single(sc, keyix, rxkeyix); 1561 } 1562} 1563 1564/* 1565 * Delete an entry in the key cache allocated by ath_key_alloc. 1566 */ 1567static int 1568ath_key_delete(struct ieee80211com *ic, const struct ieee80211_key *k) 1569{ 1570 struct ath_softc *sc = ic->ic_ifp->if_softc; 1571 struct ath_hal *ah = sc->sc_ah; 1572 const struct ieee80211_cipher *cip = k->wk_cipher; 1573 u_int keyix = k->wk_keyix; 1574 1575 DPRINTF(sc, ATH_DEBUG_KEYCACHE, "%s: delete key %u\n", __func__, keyix); 1576 1577 ath_hal_keyreset(ah, keyix); 1578 /* 1579 * Handle split tx/rx keying required for TKIP with h/w MIC. 1580 */ 1581 if (cip->ic_cipher == IEEE80211_CIPHER_TKIP && 1582 (k->wk_flags & IEEE80211_KEY_SWMIC) == 0 && sc->sc_splitmic) 1583 ath_hal_keyreset(ah, keyix+32); /* RX key */ 1584 if (keyix >= IEEE80211_WEP_NKID) { 1585 /* 1586 * Don't touch keymap entries for global keys so 1587 * they are never considered for dynamic allocation. 1588 */ 1589 clrbit(sc->sc_keymap, keyix); 1590 if (cip->ic_cipher == IEEE80211_CIPHER_TKIP && 1591 (k->wk_flags & IEEE80211_KEY_SWMIC) == 0 && 1592 sc->sc_splitmic) { 1593 clrbit(sc->sc_keymap, keyix+64); /* TX key MIC */ 1594 clrbit(sc->sc_keymap, keyix+32); /* RX key */ 1595 clrbit(sc->sc_keymap, keyix+32+64); /* RX key MIC */ 1596 } 1597 } 1598 return 1; 1599} 1600 1601/* 1602 * Set the key cache contents for the specified key. Key cache 1603 * slot(s) must already have been allocated by ath_key_alloc. 1604 */ 1605static int 1606ath_key_set(struct ieee80211com *ic, const struct ieee80211_key *k, 1607 const u_int8_t mac[IEEE80211_ADDR_LEN]) 1608{ 1609 struct ath_softc *sc = ic->ic_ifp->if_softc; 1610 1611 return ath_keyset(sc, k, mac, ic->ic_bss); 1612} 1613 1614/* 1615 * Block/unblock tx+rx processing while a key change is done. 1616 * We assume the caller serializes key management operations 1617 * so we only need to worry about synchronization with other 1618 * uses that originate in the driver. 1619 */ 1620static void 1621ath_key_update_begin(struct ieee80211com *ic) 1622{ 1623 struct ifnet *ifp = ic->ic_ifp; 1624 struct ath_softc *sc = ifp->if_softc; 1625 1626 DPRINTF(sc, ATH_DEBUG_KEYCACHE, "%s:\n", __func__); 1627#if 0 1628 tasklet_disable(&sc->sc_rxtq); 1629#endif 1630 IF_LOCK(&ifp->if_snd); /* NB: doesn't block mgmt frames */ 1631} 1632 1633static void 1634ath_key_update_end(struct ieee80211com *ic) 1635{ 1636 struct ifnet *ifp = ic->ic_ifp; 1637 struct ath_softc *sc = ifp->if_softc; 1638 1639 DPRINTF(sc, ATH_DEBUG_KEYCACHE, "%s:\n", __func__); 1640 IF_UNLOCK(&ifp->if_snd); 1641#if 0 1642 tasklet_enable(&sc->sc_rxtq); 1643#endif 1644} 1645 1646/* 1647 * Calculate the receive filter according to the 1648 * operating mode and state: 1649 * 1650 * o always accept unicast, broadcast, and multicast traffic 1651 * o maintain current state of phy error reception (the hal 1652 * may enable phy error frames for noise immunity work) 1653 * o probe request frames are accepted only when operating in 1654 * hostap, adhoc, or monitor modes 1655 * o enable promiscuous mode according to the interface state 1656 * o accept beacons: 1657 * - when operating in adhoc mode so the 802.11 layer creates 1658 * node table entries for peers, 1659 * - when operating in station mode for collecting rssi data when 1660 * the station is otherwise quiet, or 1661 * - when scanning 1662 */ 1663static u_int32_t 1664ath_calcrxfilter(struct ath_softc *sc, enum ieee80211_state state) 1665{ 1666 struct ieee80211com *ic = &sc->sc_ic; 1667 struct ath_hal *ah = sc->sc_ah; 1668 struct ifnet *ifp = sc->sc_ifp; 1669 u_int32_t rfilt; 1670 1671 rfilt = (ath_hal_getrxfilter(ah) & HAL_RX_FILTER_PHYERR) 1672 | HAL_RX_FILTER_UCAST | HAL_RX_FILTER_BCAST | HAL_RX_FILTER_MCAST; 1673 if (ic->ic_opmode != IEEE80211_M_STA) 1674 rfilt |= HAL_RX_FILTER_PROBEREQ; 1675 if (ic->ic_opmode != IEEE80211_M_HOSTAP && 1676 (ifp->if_flags & IFF_PROMISC)) 1677 rfilt |= HAL_RX_FILTER_PROM; 1678 if (ic->ic_opmode == IEEE80211_M_STA || 1679 ic->ic_opmode == IEEE80211_M_IBSS || 1680 state == IEEE80211_S_SCAN) 1681 rfilt |= HAL_RX_FILTER_BEACON; 1682 return rfilt; 1683} 1684 1685static void 1686ath_mode_init(struct ath_softc *sc) 1687{ 1688 struct ieee80211com *ic = &sc->sc_ic; 1689 struct ath_hal *ah = sc->sc_ah; 1690 struct ifnet *ifp = sc->sc_ifp; 1691 u_int32_t rfilt, mfilt[2], val; 1692 u_int8_t pos; 1693 struct ifmultiaddr *ifma; 1694 1695 /* configure rx filter */ 1696 rfilt = ath_calcrxfilter(sc, ic->ic_state); 1697 ath_hal_setrxfilter(ah, rfilt); 1698 1699 /* configure operational mode */ 1700 ath_hal_setopmode(ah); 1701 1702 /* 1703 * Handle any link-level address change. Note that we only 1704 * need to force ic_myaddr; any other addresses are handled 1705 * as a byproduct of the ifnet code marking the interface 1706 * down then up. 1707 * 1708 * XXX should get from lladdr instead of arpcom but that's more work 1709 */ 1710 IEEE80211_ADDR_COPY(ic->ic_myaddr, IF_LLADDR(ifp)); 1711 ath_hal_setmac(ah, ic->ic_myaddr); 1712 1713 /* calculate and install multicast filter */ 1714 if ((ifp->if_flags & IFF_ALLMULTI) == 0) { 1715 mfilt[0] = mfilt[1] = 0; 1716 IF_ADDR_LOCK(ifp); 1717 TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) { 1718 caddr_t dl; 1719 1720 /* calculate XOR of eight 6bit values */ 1721 dl = LLADDR((struct sockaddr_dl *) ifma->ifma_addr); 1722 val = LE_READ_4(dl + 0); 1723 pos = (val >> 18) ^ (val >> 12) ^ (val >> 6) ^ val; 1724 val = LE_READ_4(dl + 3); 1725 pos ^= (val >> 18) ^ (val >> 12) ^ (val >> 6) ^ val; 1726 pos &= 0x3f; 1727 mfilt[pos / 32] |= (1 << (pos % 32)); 1728 } 1729 IF_ADDR_UNLOCK(ifp); 1730 } else { 1731 mfilt[0] = mfilt[1] = ~0; 1732 } 1733 ath_hal_setmcastfilter(ah, mfilt[0], mfilt[1]); 1734 DPRINTF(sc, ATH_DEBUG_MODE, "%s: RX filter 0x%x, MC filter %08x:%08x\n", 1735 __func__, rfilt, mfilt[0], mfilt[1]); 1736} 1737 1738/* 1739 * Set the slot time based on the current setting. 1740 */ 1741static void 1742ath_setslottime(struct ath_softc *sc) 1743{ 1744 struct ieee80211com *ic = &sc->sc_ic; 1745 struct ath_hal *ah = sc->sc_ah; 1746 1747 if (ic->ic_flags & IEEE80211_F_SHSLOT) 1748 ath_hal_setslottime(ah, HAL_SLOT_TIME_9); 1749 else 1750 ath_hal_setslottime(ah, HAL_SLOT_TIME_20); 1751 sc->sc_updateslot = OK; 1752} 1753 1754/* 1755 * Callback from the 802.11 layer to update the 1756 * slot time based on the current setting. 1757 */ 1758static void 1759ath_updateslot(struct ifnet *ifp) 1760{ 1761 struct ath_softc *sc = ifp->if_softc; 1762 struct ieee80211com *ic = &sc->sc_ic; 1763 1764 /* 1765 * When not coordinating the BSS, change the hardware 1766 * immediately. For other operation we defer the change 1767 * until beacon updates have propagated to the stations. 1768 */ 1769 if (ic->ic_opmode == IEEE80211_M_HOSTAP) 1770 sc->sc_updateslot = UPDATE; 1771 else 1772 ath_setslottime(sc); 1773} 1774 1775/* 1776 * Setup a h/w transmit queue for beacons. 1777 */ 1778static int 1779ath_beaconq_setup(struct ath_hal *ah) 1780{ 1781 HAL_TXQ_INFO qi; 1782 1783 memset(&qi, 0, sizeof(qi)); 1784 qi.tqi_aifs = HAL_TXQ_USEDEFAULT; 1785 qi.tqi_cwmin = HAL_TXQ_USEDEFAULT; 1786 qi.tqi_cwmax = HAL_TXQ_USEDEFAULT; 1787 /* NB: for dynamic turbo, don't enable any other interrupts */ 1788 qi.tqi_qflags = TXQ_FLAG_TXDESCINT_ENABLE; 1789 return ath_hal_setuptxqueue(ah, HAL_TX_QUEUE_BEACON, &qi); 1790} 1791 1792/* 1793 * Setup the transmit queue parameters for the beacon queue. 1794 */ 1795static int 1796ath_beaconq_config(struct ath_softc *sc) 1797{ 1798#define ATH_EXPONENT_TO_VALUE(v) ((1<<(v))-1) 1799 struct ieee80211com *ic = &sc->sc_ic; 1800 struct ath_hal *ah = sc->sc_ah; 1801 HAL_TXQ_INFO qi; 1802 1803 ath_hal_gettxqueueprops(ah, sc->sc_bhalq, &qi); 1804 if (ic->ic_opmode == IEEE80211_M_HOSTAP) { 1805 /* 1806 * Always burst out beacon and CAB traffic. 1807 */ 1808 qi.tqi_aifs = ATH_BEACON_AIFS_DEFAULT; 1809 qi.tqi_cwmin = ATH_BEACON_CWMIN_DEFAULT; 1810 qi.tqi_cwmax = ATH_BEACON_CWMAX_DEFAULT; 1811 } else { 1812 struct wmeParams *wmep = 1813 &ic->ic_wme.wme_chanParams.cap_wmeParams[WME_AC_BE]; 1814 /* 1815 * Adhoc mode; important thing is to use 2x cwmin. 1816 */ 1817 qi.tqi_aifs = wmep->wmep_aifsn; 1818 qi.tqi_cwmin = 2*ATH_EXPONENT_TO_VALUE(wmep->wmep_logcwmin); 1819 qi.tqi_cwmax = ATH_EXPONENT_TO_VALUE(wmep->wmep_logcwmax); 1820 } 1821 1822 if (!ath_hal_settxqueueprops(ah, sc->sc_bhalq, &qi)) { 1823 device_printf(sc->sc_dev, "unable to update parameters for " 1824 "beacon hardware queue!\n"); 1825 return 0; 1826 } else { 1827 ath_hal_resettxqueue(ah, sc->sc_bhalq); /* push to h/w */ 1828 return 1; 1829 } 1830#undef ATH_EXPONENT_TO_VALUE 1831} 1832 1833/* 1834 * Allocate and setup an initial beacon frame. 1835 */ 1836static int 1837ath_beacon_alloc(struct ath_softc *sc, struct ieee80211_node *ni) 1838{ 1839 struct ieee80211com *ic = ni->ni_ic; 1840 struct ath_buf *bf; 1841 struct mbuf *m; 1842 int error; 1843 1844 bf = STAILQ_FIRST(&sc->sc_bbuf); 1845 if (bf == NULL) { 1846 DPRINTF(sc, ATH_DEBUG_BEACON, "%s: no dma buffers\n", __func__); 1847 sc->sc_stats.ast_be_nombuf++; /* XXX */ 1848 return ENOMEM; /* XXX */ 1849 } 1850 /* 1851 * NB: the beacon data buffer must be 32-bit aligned; 1852 * we assume the mbuf routines will return us something 1853 * with this alignment (perhaps should assert). 1854 */ 1855 m = ieee80211_beacon_alloc(ic, ni, &sc->sc_boff); 1856 if (m == NULL) { 1857 DPRINTF(sc, ATH_DEBUG_BEACON, "%s: cannot get mbuf\n", 1858 __func__); 1859 sc->sc_stats.ast_be_nombuf++; 1860 return ENOMEM; 1861 } 1862 error = bus_dmamap_load_mbuf_sg(sc->sc_dmat, bf->bf_dmamap, m, 1863 bf->bf_segs, &bf->bf_nseg, 1864 BUS_DMA_NOWAIT); 1865 if (error == 0) { 1866 bf->bf_m = m; 1867 bf->bf_node = ieee80211_ref_node(ni); 1868 } else { 1869 m_freem(m); 1870 } 1871 return error; 1872} 1873 1874/* 1875 * Setup the beacon frame for transmit. 1876 */ 1877static void 1878ath_beacon_setup(struct ath_softc *sc, struct ath_buf *bf) 1879{ 1880#define USE_SHPREAMBLE(_ic) \ 1881 (((_ic)->ic_flags & (IEEE80211_F_SHPREAMBLE | IEEE80211_F_USEBARKER))\ 1882 == IEEE80211_F_SHPREAMBLE) 1883 struct ieee80211_node *ni = bf->bf_node; 1884 struct ieee80211com *ic = ni->ni_ic; 1885 struct mbuf *m = bf->bf_m; 1886 struct ath_hal *ah = sc->sc_ah; 1887 struct ath_desc *ds; 1888 int flags, antenna; 1889 const HAL_RATE_TABLE *rt; 1890 u_int8_t rix, rate; 1891 1892 DPRINTF(sc, ATH_DEBUG_BEACON, "%s: m %p len %u\n", 1893 __func__, m, m->m_len); 1894 1895 /* setup descriptors */ 1896 ds = bf->bf_desc; 1897 1898 flags = HAL_TXDESC_NOACK; 1899 if (ic->ic_opmode == IEEE80211_M_IBSS && sc->sc_hasveol) { 1900 ds->ds_link = bf->bf_daddr; /* self-linked */ 1901 flags |= HAL_TXDESC_VEOL; 1902 /* 1903 * Let hardware handle antenna switching. 1904 */ 1905 antenna = sc->sc_txantenna; 1906 } else { 1907 ds->ds_link = 0; 1908 /* 1909 * Switch antenna every 4 beacons. 1910 * XXX assumes two antenna 1911 */ 1912 antenna = (sc->sc_stats.ast_be_xmit & 4 ? 2 : 1); 1913 } 1914 1915 KASSERT(bf->bf_nseg == 1, 1916 ("multi-segment beacon frame; nseg %u", bf->bf_nseg)); 1917 ds->ds_data = bf->bf_segs[0].ds_addr; 1918 /* 1919 * Calculate rate code. 1920 * XXX everything at min xmit rate 1921 */ 1922 rix = sc->sc_minrateix; 1923 rt = sc->sc_currates; 1924 rate = rt->info[rix].rateCode; 1925 if (USE_SHPREAMBLE(ic)) 1926 rate |= rt->info[rix].shortPreamble; 1927 ath_hal_setuptxdesc(ah, ds 1928 , m->m_len + IEEE80211_CRC_LEN /* frame length */ 1929 , sizeof(struct ieee80211_frame)/* header length */ 1930 , HAL_PKT_TYPE_BEACON /* Atheros packet type */ 1931 , ni->ni_txpower /* txpower XXX */ 1932 , rate, 1 /* series 0 rate/tries */ 1933 , HAL_TXKEYIX_INVALID /* no encryption */ 1934 , antenna /* antenna mode */ 1935 , flags /* no ack, veol for beacons */ 1936 , 0 /* rts/cts rate */ 1937 , 0 /* rts/cts duration */ 1938 ); 1939 /* NB: beacon's BufLen must be a multiple of 4 bytes */ 1940 ath_hal_filltxdesc(ah, ds 1941 , roundup(m->m_len, 4) /* buffer length */ 1942 , AH_TRUE /* first segment */ 1943 , AH_TRUE /* last segment */ 1944 , ds /* first descriptor */ 1945 ); 1946#undef USE_SHPREAMBLE 1947} 1948 1949/* 1950 * Transmit a beacon frame at SWBA. Dynamic updates to the 1951 * frame contents are done as needed and the slot time is 1952 * also adjusted based on current state. 1953 */ 1954static void 1955ath_beacon_proc(void *arg, int pending) 1956{ 1957 struct ath_softc *sc = arg; 1958 struct ath_buf *bf = STAILQ_FIRST(&sc->sc_bbuf); 1959 struct ieee80211_node *ni = bf->bf_node; 1960 struct ieee80211com *ic = ni->ni_ic; 1961 struct ath_hal *ah = sc->sc_ah; 1962 struct mbuf *m; 1963 int ncabq, error, otherant; 1964 1965 DPRINTF(sc, ATH_DEBUG_BEACON_PROC, "%s: pending %u\n", 1966 __func__, pending); 1967 1968 if (ic->ic_opmode == IEEE80211_M_STA || 1969 ic->ic_opmode == IEEE80211_M_MONITOR || 1970 bf == NULL || bf->bf_m == NULL) { 1971 DPRINTF(sc, ATH_DEBUG_ANY, "%s: ic_flags=%x bf=%p bf_m=%p\n", 1972 __func__, ic->ic_flags, bf, bf ? bf->bf_m : NULL); 1973 return; 1974 } 1975 /* 1976 * Check if the previous beacon has gone out. If 1977 * not don't don't try to post another, skip this 1978 * period and wait for the next. Missed beacons 1979 * indicate a problem and should not occur. If we 1980 * miss too many consecutive beacons reset the device. 1981 */ 1982 if (ath_hal_numtxpending(ah, sc->sc_bhalq) != 0) { 1983 sc->sc_bmisscount++; 1984 DPRINTF(sc, ATH_DEBUG_BEACON_PROC, 1985 "%s: missed %u consecutive beacons\n", 1986 __func__, sc->sc_bmisscount); 1987 if (sc->sc_bmisscount > 3) /* NB: 3 is a guess */ 1988 taskqueue_enqueue(sc->sc_tq, &sc->sc_bstucktask); 1989 return; 1990 } 1991 if (sc->sc_bmisscount != 0) { 1992 DPRINTF(sc, ATH_DEBUG_BEACON, 1993 "%s: resume beacon xmit after %u misses\n", 1994 __func__, sc->sc_bmisscount); 1995 sc->sc_bmisscount = 0; 1996 } 1997 1998 /* 1999 * Update dynamic beacon contents. If this returns 2000 * non-zero then we need to remap the memory because 2001 * the beacon frame changed size (probably because 2002 * of the TIM bitmap). 2003 */ 2004 m = bf->bf_m; 2005 ncabq = ath_hal_numtxpending(ah, sc->sc_cabq->axq_qnum); 2006 if (ieee80211_beacon_update(ic, bf->bf_node, &sc->sc_boff, m, ncabq)) { 2007 /* XXX too conservative? */ 2008 bus_dmamap_unload(sc->sc_dmat, bf->bf_dmamap); 2009 error = bus_dmamap_load_mbuf_sg(sc->sc_dmat, bf->bf_dmamap, m, 2010 bf->bf_segs, &bf->bf_nseg, 2011 BUS_DMA_NOWAIT); 2012 if (error != 0) { 2013 if_printf(ic->ic_ifp, 2014 "%s: bus_dmamap_load_mbuf_sg failed, error %u\n", 2015 __func__, error); 2016 return; 2017 } 2018 } 2019 2020 /* 2021 * Handle slot time change when a non-ERP station joins/leaves 2022 * an 11g network. The 802.11 layer notifies us via callback, 2023 * we mark updateslot, then wait one beacon before effecting 2024 * the change. This gives associated stations at least one 2025 * beacon interval to note the state change. 2026 */ 2027 /* XXX locking */ 2028 if (sc->sc_updateslot == UPDATE) 2029 sc->sc_updateslot = COMMIT; /* commit next beacon */ 2030 else if (sc->sc_updateslot == COMMIT) 2031 ath_setslottime(sc); /* commit change to h/w */ 2032 2033 /* 2034 * Check recent per-antenna transmit statistics and flip 2035 * the default antenna if noticeably more frames went out 2036 * on the non-default antenna. 2037 * XXX assumes 2 anntenae 2038 */ 2039 otherant = sc->sc_defant & 1 ? 2 : 1; 2040 if (sc->sc_ant_tx[otherant] > sc->sc_ant_tx[sc->sc_defant] + 2) 2041 ath_setdefantenna(sc, otherant); 2042 sc->sc_ant_tx[1] = sc->sc_ant_tx[2] = 0; 2043 2044 /* 2045 * Construct tx descriptor. 2046 */ 2047 ath_beacon_setup(sc, bf); 2048 2049 /* 2050 * Stop any current dma and put the new frame on the queue. 2051 * This should never fail since we check above that no frames 2052 * are still pending on the queue. 2053 */ 2054 if (!ath_hal_stoptxdma(ah, sc->sc_bhalq)) { 2055 DPRINTF(sc, ATH_DEBUG_ANY, 2056 "%s: beacon queue %u did not stop?\n", 2057 __func__, sc->sc_bhalq); 2058 } 2059 bus_dmamap_sync(sc->sc_dmat, bf->bf_dmamap, BUS_DMASYNC_PREWRITE); 2060 2061 /* 2062 * Enable the CAB queue before the beacon queue to 2063 * insure cab frames are triggered by this beacon. 2064 */ 2065 if (sc->sc_boff.bo_tim[4] & 1) /* NB: only at DTIM */ 2066 ath_hal_txstart(ah, sc->sc_cabq->axq_qnum); 2067 ath_hal_puttxbuf(ah, sc->sc_bhalq, bf->bf_daddr); 2068 ath_hal_txstart(ah, sc->sc_bhalq); 2069 DPRINTF(sc, ATH_DEBUG_BEACON_PROC, 2070 "%s: TXDP[%u] = %p (%p)\n", __func__, 2071 sc->sc_bhalq, (caddr_t)bf->bf_daddr, bf->bf_desc); 2072 2073 sc->sc_stats.ast_be_xmit++; 2074} 2075 2076/* 2077 * Reset the hardware after detecting beacons have stopped. 2078 */ 2079static void 2080ath_bstuck_proc(void *arg, int pending) 2081{ 2082 struct ath_softc *sc = arg; 2083 struct ifnet *ifp = sc->sc_ifp; 2084 2085 if_printf(ifp, "stuck beacon; resetting (bmiss count %u)\n", 2086 sc->sc_bmisscount); 2087 ath_reset(ifp); 2088} 2089 2090/* 2091 * Reclaim beacon resources. 2092 */ 2093static void 2094ath_beacon_free(struct ath_softc *sc) 2095{ 2096 struct ath_buf *bf; 2097 2098 STAILQ_FOREACH(bf, &sc->sc_bbuf, bf_list) { 2099 if (bf->bf_m != NULL) { 2100 bus_dmamap_unload(sc->sc_dmat, bf->bf_dmamap); 2101 m_freem(bf->bf_m); 2102 bf->bf_m = NULL; 2103 } 2104 if (bf->bf_node != NULL) { 2105 ieee80211_free_node(bf->bf_node); 2106 bf->bf_node = NULL; 2107 } 2108 } 2109} 2110 2111/* 2112 * Configure the beacon and sleep timers. 2113 * 2114 * When operating as an AP this resets the TSF and sets 2115 * up the hardware to notify us when we need to issue beacons. 2116 * 2117 * When operating in station mode this sets up the beacon 2118 * timers according to the timestamp of the last received 2119 * beacon and the current TSF, configures PCF and DTIM 2120 * handling, programs the sleep registers so the hardware 2121 * will wakeup in time to receive beacons, and configures 2122 * the beacon miss handling so we'll receive a BMISS 2123 * interrupt when we stop seeing beacons from the AP 2124 * we've associated with. 2125 */ 2126static void 2127ath_beacon_config(struct ath_softc *sc) 2128{ 2129#define TSF_TO_TU(_h,_l) (((_h) << 22) | ((_l) >> 10)) 2130 struct ath_hal *ah = sc->sc_ah; 2131 struct ieee80211com *ic = &sc->sc_ic; 2132 struct ieee80211_node *ni = ic->ic_bss; 2133 u_int32_t nexttbtt, intval; 2134 2135 /* extract tstamp from last beacon and convert to TU */ 2136 nexttbtt = TSF_TO_TU(LE_READ_4(ni->ni_tstamp.data + 4), 2137 LE_READ_4(ni->ni_tstamp.data)); 2138 /* NB: the beacon interval is kept internally in TU's */ 2139 intval = ni->ni_intval & HAL_BEACON_PERIOD; 2140 if (nexttbtt == 0) /* e.g. for ap mode */ 2141 nexttbtt = intval; 2142 else if (intval) /* NB: can be 0 for monitor mode */ 2143 nexttbtt = roundup(nexttbtt, intval); 2144 DPRINTF(sc, ATH_DEBUG_BEACON, "%s: nexttbtt %u intval %u (%u)\n", 2145 __func__, nexttbtt, intval, ni->ni_intval); 2146 if (ic->ic_opmode == IEEE80211_M_STA) { 2147 HAL_BEACON_STATE bs; 2148 u_int64_t tsf; 2149 u_int32_t tsftu; 2150 int dtimperiod, dtimcount; 2151 int cfpperiod, cfpcount; 2152 2153 /* 2154 * Setup dtim and cfp parameters according to 2155 * last beacon we received (which may be none). 2156 */ 2157 dtimperiod = ni->ni_dtim_period; 2158 if (dtimperiod <= 0) /* NB: 0 if not known */ 2159 dtimperiod = 1; 2160 dtimcount = ni->ni_dtim_count; 2161 if (dtimcount >= dtimperiod) /* NB: sanity check */ 2162 dtimcount = 0; /* XXX? */ 2163 cfpperiod = 1; /* NB: no PCF support yet */ 2164 cfpcount = 0; 2165#define FUDGE 2 2166 /* 2167 * Pull nexttbtt forward to reflect the current 2168 * TSF and calculate dtim+cfp state for the result. 2169 */ 2170 tsf = ath_hal_gettsf64(ah); 2171 tsftu = TSF_TO_TU((u_int32_t)(tsf>>32), (u_int32_t)tsf) + FUDGE; 2172 do { 2173 nexttbtt += intval; 2174 if (--dtimcount < 0) { 2175 dtimcount = dtimperiod - 1; 2176 if (--cfpcount < 0) 2177 cfpcount = cfpperiod - 1; 2178 } 2179 } while (nexttbtt < tsftu); 2180#undef FUDGE 2181 memset(&bs, 0, sizeof(bs)); 2182 bs.bs_intval = intval; 2183 bs.bs_nexttbtt = nexttbtt; 2184 bs.bs_dtimperiod = dtimperiod*intval; 2185 bs.bs_nextdtim = bs.bs_nexttbtt + dtimcount*intval; 2186 bs.bs_cfpperiod = cfpperiod*bs.bs_dtimperiod; 2187 bs.bs_cfpnext = bs.bs_nextdtim + cfpcount*bs.bs_dtimperiod; 2188 bs.bs_cfpmaxduration = 0; 2189#if 0 2190 /* 2191 * The 802.11 layer records the offset to the DTIM 2192 * bitmap while receiving beacons; use it here to 2193 * enable h/w detection of our AID being marked in 2194 * the bitmap vector (to indicate frames for us are 2195 * pending at the AP). 2196 * XXX do DTIM handling in s/w to WAR old h/w bugs 2197 * XXX enable based on h/w rev for newer chips 2198 */ 2199 bs.bs_timoffset = ni->ni_timoff; 2200#endif 2201 /* 2202 * Calculate the number of consecutive beacons to miss 2203 * before taking a BMISS interrupt. The configuration 2204 * is specified in ms, so we need to convert that to 2205 * TU's and then calculate based on the beacon interval. 2206 * Note that we clamp the result to at most 10 beacons. 2207 */ 2208 bs.bs_bmissthreshold = ic->ic_bmissthreshold; 2209 if (bs.bs_bmissthreshold > 10) 2210 bs.bs_bmissthreshold = 10; 2211 else if (bs.bs_bmissthreshold <= 0) 2212 bs.bs_bmissthreshold = 1; 2213 2214 /* 2215 * Calculate sleep duration. The configuration is 2216 * given in ms. We insure a multiple of the beacon 2217 * period is used. Also, if the sleep duration is 2218 * greater than the DTIM period then it makes senses 2219 * to make it a multiple of that. 2220 * 2221 * XXX fixed at 100ms 2222 */ 2223 bs.bs_sleepduration = 2224 roundup(IEEE80211_MS_TO_TU(100), bs.bs_intval); 2225 if (bs.bs_sleepduration > bs.bs_dtimperiod) 2226 bs.bs_sleepduration = roundup(bs.bs_sleepduration, bs.bs_dtimperiod); 2227 2228 DPRINTF(sc, ATH_DEBUG_BEACON, 2229 "%s: tsf %ju tsf:tu %u intval %u nexttbtt %u dtim %u nextdtim %u bmiss %u sleep %u cfp:period %u maxdur %u next %u timoffset %u\n" 2230 , __func__ 2231 , tsf, tsftu 2232 , bs.bs_intval 2233 , bs.bs_nexttbtt 2234 , bs.bs_dtimperiod 2235 , bs.bs_nextdtim 2236 , bs.bs_bmissthreshold 2237 , bs.bs_sleepduration 2238 , bs.bs_cfpperiod 2239 , bs.bs_cfpmaxduration 2240 , bs.bs_cfpnext 2241 , bs.bs_timoffset 2242 ); 2243 ath_hal_intrset(ah, 0); 2244 ath_hal_beacontimers(ah, &bs); 2245 sc->sc_imask |= HAL_INT_BMISS; 2246 ath_hal_intrset(ah, sc->sc_imask); 2247 } else { 2248 ath_hal_intrset(ah, 0); 2249 if (nexttbtt == intval) 2250 intval |= HAL_BEACON_RESET_TSF; 2251 if (ic->ic_opmode == IEEE80211_M_IBSS) { 2252 /* 2253 * In IBSS mode enable the beacon timers but only 2254 * enable SWBA interrupts if we need to manually 2255 * prepare beacon frames. Otherwise we use a 2256 * self-linked tx descriptor and let the hardware 2257 * deal with things. 2258 */ 2259 intval |= HAL_BEACON_ENA; 2260 if (!sc->sc_hasveol) 2261 sc->sc_imask |= HAL_INT_SWBA; 2262 ath_beaconq_config(sc); 2263 } else if (ic->ic_opmode == IEEE80211_M_HOSTAP) { 2264 /* 2265 * In AP mode we enable the beacon timers and 2266 * SWBA interrupts to prepare beacon frames. 2267 */ 2268 intval |= HAL_BEACON_ENA; 2269 sc->sc_imask |= HAL_INT_SWBA; /* beacon prepare */ 2270 ath_beaconq_config(sc); 2271 } 2272 ath_hal_beaconinit(ah, nexttbtt, intval); 2273 sc->sc_bmisscount = 0; 2274 ath_hal_intrset(ah, sc->sc_imask); 2275 /* 2276 * When using a self-linked beacon descriptor in 2277 * ibss mode load it once here. 2278 */ 2279 if (ic->ic_opmode == IEEE80211_M_IBSS && sc->sc_hasveol) 2280 ath_beacon_proc(sc, 0); 2281 } 2282#undef TSF_TO_TU 2283} 2284 2285static void 2286ath_load_cb(void *arg, bus_dma_segment_t *segs, int nsegs, int error) 2287{ 2288 bus_addr_t *paddr = (bus_addr_t*) arg; 2289 KASSERT(error == 0, ("error %u on bus_dma callback", error)); 2290 *paddr = segs->ds_addr; 2291} 2292 2293static int 2294ath_descdma_setup(struct ath_softc *sc, 2295 struct ath_descdma *dd, ath_bufhead *head, 2296 const char *name, int nbuf, int ndesc) 2297{ 2298#define DS2PHYS(_dd, _ds) \ 2299 ((_dd)->dd_desc_paddr + ((caddr_t)(_ds) - (caddr_t)(_dd)->dd_desc)) 2300 struct ifnet *ifp = sc->sc_ifp; 2301 struct ath_desc *ds; 2302 struct ath_buf *bf; 2303 int i, bsize, error; 2304 2305 DPRINTF(sc, ATH_DEBUG_RESET, "%s: %s DMA: %u buffers %u desc/buf\n", 2306 __func__, name, nbuf, ndesc); 2307 2308 dd->dd_name = name; 2309 dd->dd_desc_len = sizeof(struct ath_desc) * nbuf * ndesc; 2310 2311 /* 2312 * Setup DMA descriptor area. 2313 */ 2314 error = bus_dma_tag_create(NULL, /* parent */ 2315 PAGE_SIZE, 0, /* alignment, bounds */ 2316 BUS_SPACE_MAXADDR_32BIT, /* lowaddr */ 2317 BUS_SPACE_MAXADDR, /* highaddr */ 2318 NULL, NULL, /* filter, filterarg */ 2319 dd->dd_desc_len, /* maxsize */ 2320 1, /* nsegments */ 2321 BUS_SPACE_MAXADDR, /* maxsegsize */ 2322 BUS_DMA_ALLOCNOW, /* flags */ 2323 NULL, /* lockfunc */ 2324 NULL, /* lockarg */ 2325 &dd->dd_dmat); 2326 if (error != 0) { 2327 if_printf(ifp, "cannot allocate %s DMA tag\n", dd->dd_name); 2328 return error; 2329 } 2330 2331 /* allocate descriptors */ 2332 error = bus_dmamap_create(dd->dd_dmat, BUS_DMA_NOWAIT, &dd->dd_dmamap); 2333 if (error != 0) { 2334 if_printf(ifp, "unable to create dmamap for %s descriptors, " 2335 "error %u\n", dd->dd_name, error); 2336 goto fail0; 2337 } 2338 2339 error = bus_dmamem_alloc(dd->dd_dmat, (void**) &dd->dd_desc, 2340 BUS_DMA_NOWAIT, &dd->dd_dmamap); 2341 if (error != 0) { 2342 if_printf(ifp, "unable to alloc memory for %u %s descriptors, " 2343 "error %u\n", nbuf * ndesc, dd->dd_name, error); 2344 goto fail1; 2345 } 2346 2347 error = bus_dmamap_load(dd->dd_dmat, dd->dd_dmamap, 2348 dd->dd_desc, dd->dd_desc_len, 2349 ath_load_cb, &dd->dd_desc_paddr, 2350 BUS_DMA_NOWAIT); 2351 if (error != 0) { 2352 if_printf(ifp, "unable to map %s descriptors, error %u\n", 2353 dd->dd_name, error); 2354 goto fail2; 2355 } 2356 2357 ds = dd->dd_desc; 2358 DPRINTF(sc, ATH_DEBUG_RESET, "%s: %s DMA map: %p (%lu) -> %p (%lu)\n", 2359 __func__, dd->dd_name, ds, (u_long) dd->dd_desc_len, 2360 (caddr_t) dd->dd_desc_paddr, /*XXX*/ (u_long) dd->dd_desc_len); 2361 2362 /* allocate rx buffers */ 2363 bsize = sizeof(struct ath_buf) * nbuf; 2364 bf = malloc(bsize, M_ATHDEV, M_NOWAIT | M_ZERO); 2365 if (bf == NULL) { 2366 if_printf(ifp, "malloc of %s buffers failed, size %u\n", 2367 dd->dd_name, bsize); 2368 goto fail3; 2369 } 2370 dd->dd_bufptr = bf; 2371 2372 STAILQ_INIT(head); 2373 for (i = 0; i < nbuf; i++, bf++, ds += ndesc) { 2374 bf->bf_desc = ds; 2375 bf->bf_daddr = DS2PHYS(dd, ds); 2376 error = bus_dmamap_create(sc->sc_dmat, BUS_DMA_NOWAIT, 2377 &bf->bf_dmamap); 2378 if (error != 0) { 2379 if_printf(ifp, "unable to create dmamap for %s " 2380 "buffer %u, error %u\n", dd->dd_name, i, error); 2381 ath_descdma_cleanup(sc, dd, head); 2382 return error; 2383 } 2384 STAILQ_INSERT_TAIL(head, bf, bf_list); 2385 } 2386 return 0; 2387fail3: 2388 bus_dmamap_unload(dd->dd_dmat, dd->dd_dmamap); 2389fail2: 2390 bus_dmamem_free(dd->dd_dmat, dd->dd_desc, dd->dd_dmamap); 2391fail1: 2392 bus_dmamap_destroy(dd->dd_dmat, dd->dd_dmamap); 2393fail0: 2394 bus_dma_tag_destroy(dd->dd_dmat); 2395 memset(dd, 0, sizeof(*dd)); 2396 return error; 2397#undef DS2PHYS 2398} 2399 2400static void 2401ath_descdma_cleanup(struct ath_softc *sc, 2402 struct ath_descdma *dd, ath_bufhead *head) 2403{ 2404 struct ath_buf *bf; 2405 struct ieee80211_node *ni; 2406 2407 bus_dmamap_unload(dd->dd_dmat, dd->dd_dmamap); 2408 bus_dmamem_free(dd->dd_dmat, dd->dd_desc, dd->dd_dmamap); 2409 bus_dmamap_destroy(dd->dd_dmat, dd->dd_dmamap); 2410 bus_dma_tag_destroy(dd->dd_dmat); 2411 2412 STAILQ_FOREACH(bf, head, bf_list) { 2413 if (bf->bf_m) { 2414 m_freem(bf->bf_m); 2415 bf->bf_m = NULL; 2416 } 2417 if (bf->bf_dmamap != NULL) { 2418 bus_dmamap_destroy(sc->sc_dmat, bf->bf_dmamap); 2419 bf->bf_dmamap = NULL; 2420 } 2421 ni = bf->bf_node; 2422 bf->bf_node = NULL; 2423 if (ni != NULL) { 2424 /* 2425 * Reclaim node reference. 2426 */ 2427 ieee80211_free_node(ni); 2428 } 2429 } 2430 2431 STAILQ_INIT(head); 2432 free(dd->dd_bufptr, M_ATHDEV); 2433 memset(dd, 0, sizeof(*dd)); 2434} 2435 2436static int 2437ath_desc_alloc(struct ath_softc *sc) 2438{ 2439 int error; 2440 2441 error = ath_descdma_setup(sc, &sc->sc_rxdma, &sc->sc_rxbuf, 2442 "rx", ath_rxbuf, 1); 2443 if (error != 0) 2444 return error; 2445 2446 error = ath_descdma_setup(sc, &sc->sc_txdma, &sc->sc_txbuf, 2447 "tx", ath_txbuf, ATH_TXDESC); 2448 if (error != 0) { 2449 ath_descdma_cleanup(sc, &sc->sc_rxdma, &sc->sc_rxbuf); 2450 return error; 2451 } 2452 2453 error = ath_descdma_setup(sc, &sc->sc_bdma, &sc->sc_bbuf, 2454 "beacon", 1, 1); 2455 if (error != 0) { 2456 ath_descdma_cleanup(sc, &sc->sc_txdma, &sc->sc_txbuf); 2457 ath_descdma_cleanup(sc, &sc->sc_rxdma, &sc->sc_rxbuf); 2458 return error; 2459 } 2460 return 0; 2461} 2462 2463static void 2464ath_desc_free(struct ath_softc *sc) 2465{ 2466 2467 if (sc->sc_bdma.dd_desc_len != 0) 2468 ath_descdma_cleanup(sc, &sc->sc_bdma, &sc->sc_bbuf); 2469 if (sc->sc_txdma.dd_desc_len != 0) 2470 ath_descdma_cleanup(sc, &sc->sc_txdma, &sc->sc_txbuf); 2471 if (sc->sc_rxdma.dd_desc_len != 0) 2472 ath_descdma_cleanup(sc, &sc->sc_rxdma, &sc->sc_rxbuf); 2473} 2474 2475static struct ieee80211_node * 2476ath_node_alloc(struct ieee80211_node_table *nt) 2477{ 2478 struct ieee80211com *ic = nt->nt_ic; 2479 struct ath_softc *sc = ic->ic_ifp->if_softc; 2480 const size_t space = sizeof(struct ath_node) + sc->sc_rc->arc_space; 2481 struct ath_node *an; 2482 2483 an = malloc(space, M_80211_NODE, M_NOWAIT|M_ZERO); 2484 if (an == NULL) { 2485 /* XXX stat+msg */ 2486 return NULL; 2487 } 2488 an->an_avgrssi = ATH_RSSI_DUMMY_MARKER; 2489 ath_rate_node_init(sc, an); 2490 2491 DPRINTF(sc, ATH_DEBUG_NODE, "%s: an %p\n", __func__, an); 2492 return &an->an_node; 2493} 2494 2495static void 2496ath_node_free(struct ieee80211_node *ni) 2497{ 2498 struct ieee80211com *ic = ni->ni_ic; 2499 struct ath_softc *sc = ic->ic_ifp->if_softc; 2500 2501 DPRINTF(sc, ATH_DEBUG_NODE, "%s: ni %p\n", __func__, ni); 2502 2503 ath_rate_node_cleanup(sc, ATH_NODE(ni)); 2504 sc->sc_node_free(ni); 2505} 2506 2507static u_int8_t 2508ath_node_getrssi(const struct ieee80211_node *ni) 2509{ 2510#define HAL_EP_RND(x, mul) \ 2511 ((((x)%(mul)) >= ((mul)/2)) ? ((x) + ((mul) - 1)) / (mul) : (x)/(mul)) 2512 u_int32_t avgrssi = ATH_NODE_CONST(ni)->an_avgrssi; 2513 int32_t rssi; 2514 2515 /* 2516 * When only one frame is received there will be no state in 2517 * avgrssi so fallback on the value recorded by the 802.11 layer. 2518 */ 2519 if (avgrssi != ATH_RSSI_DUMMY_MARKER) 2520 rssi = HAL_EP_RND(avgrssi, HAL_RSSI_EP_MULTIPLIER); 2521 else 2522 rssi = ni->ni_rssi; 2523 /* NB: theoretically we shouldn't need this, but be paranoid */ 2524 return rssi < 0 ? 0 : rssi > 127 ? 127 : rssi; 2525#undef HAL_EP_RND 2526} 2527 2528static int 2529ath_rxbuf_init(struct ath_softc *sc, struct ath_buf *bf) 2530{ 2531 struct ath_hal *ah = sc->sc_ah; 2532 int error; 2533 struct mbuf *m; 2534 struct ath_desc *ds; 2535 2536 m = bf->bf_m; 2537 if (m == NULL) { 2538 /* 2539 * NB: by assigning a page to the rx dma buffer we 2540 * implicitly satisfy the Atheros requirement that 2541 * this buffer be cache-line-aligned and sized to be 2542 * multiple of the cache line size. Not doing this 2543 * causes weird stuff to happen (for the 5210 at least). 2544 */ 2545 m = m_getcl(M_DONTWAIT, MT_DATA, M_PKTHDR); 2546 if (m == NULL) { 2547 DPRINTF(sc, ATH_DEBUG_ANY, 2548 "%s: no mbuf/cluster\n", __func__); 2549 sc->sc_stats.ast_rx_nombuf++; 2550 return ENOMEM; 2551 } 2552 bf->bf_m = m; 2553 m->m_pkthdr.len = m->m_len = m->m_ext.ext_size; 2554 2555 error = bus_dmamap_load_mbuf_sg(sc->sc_dmat, 2556 bf->bf_dmamap, m, 2557 bf->bf_segs, &bf->bf_nseg, 2558 BUS_DMA_NOWAIT); 2559 if (error != 0) { 2560 DPRINTF(sc, ATH_DEBUG_ANY, 2561 "%s: bus_dmamap_load_mbuf_sg failed; error %d\n", 2562 __func__, error); 2563 sc->sc_stats.ast_rx_busdma++; 2564 return error; 2565 } 2566 KASSERT(bf->bf_nseg == 1, 2567 ("multi-segment packet; nseg %u", bf->bf_nseg)); 2568 } 2569 bus_dmamap_sync(sc->sc_dmat, bf->bf_dmamap, BUS_DMASYNC_PREREAD); 2570 2571 /* 2572 * Setup descriptors. For receive we always terminate 2573 * the descriptor list with a self-linked entry so we'll 2574 * not get overrun under high load (as can happen with a 2575 * 5212 when ANI processing enables PHY error frames). 2576 * 2577 * To insure the last descriptor is self-linked we create 2578 * each descriptor as self-linked and add it to the end. As 2579 * each additional descriptor is added the previous self-linked 2580 * entry is ``fixed'' naturally. This should be safe even 2581 * if DMA is happening. When processing RX interrupts we 2582 * never remove/process the last, self-linked, entry on the 2583 * descriptor list. This insures the hardware always has 2584 * someplace to write a new frame. 2585 */ 2586 ds = bf->bf_desc; 2587 ds->ds_link = bf->bf_daddr; /* link to self */ 2588 ds->ds_data = bf->bf_segs[0].ds_addr; 2589 ath_hal_setuprxdesc(ah, ds 2590 , m->m_len /* buffer size */ 2591 , 0 2592 ); 2593 2594 if (sc->sc_rxlink != NULL) 2595 *sc->sc_rxlink = bf->bf_daddr; 2596 sc->sc_rxlink = &ds->ds_link; 2597 return 0; 2598} 2599 2600/* 2601 * Extend 15-bit time stamp from rx descriptor to 2602 * a full 64-bit TSF using the specified TSF. 2603 */ 2604static __inline u_int64_t 2605ath_extend_tsf(u_int32_t rstamp, u_int64_t tsf) 2606{ 2607 if ((tsf & 0x7fff) < rstamp) 2608 tsf -= 0x8000; 2609 return ((tsf &~ 0x7fff) | rstamp); 2610} 2611 2612/* 2613 * Intercept management frames to collect beacon rssi data 2614 * and to do ibss merges. 2615 */ 2616static void 2617ath_recv_mgmt(struct ieee80211com *ic, struct mbuf *m, 2618 struct ieee80211_node *ni, 2619 int subtype, int rssi, u_int32_t rstamp) 2620{ 2621 struct ath_softc *sc = ic->ic_ifp->if_softc; 2622 2623 /* 2624 * Call up first so subsequent work can use information 2625 * potentially stored in the node (e.g. for ibss merge). 2626 */ 2627 sc->sc_recv_mgmt(ic, m, ni, subtype, rssi, rstamp); 2628 switch (subtype) { 2629 case IEEE80211_FC0_SUBTYPE_BEACON: 2630 /* update rssi statistics for use by the hal */ 2631 ATH_RSSI_LPF(sc->sc_halstats.ns_avgbrssi, rssi); 2632 /* fall thru... */ 2633 case IEEE80211_FC0_SUBTYPE_PROBE_RESP: 2634 if (ic->ic_opmode == IEEE80211_M_IBSS && 2635 ic->ic_state == IEEE80211_S_RUN) { 2636 u_int64_t tsf = ath_extend_tsf(rstamp, 2637 ath_hal_gettsf64(sc->sc_ah)); 2638 /* 2639 * Handle ibss merge as needed; check the tsf on the 2640 * frame before attempting the merge. The 802.11 spec 2641 * says the station should change it's bssid to match 2642 * the oldest station with the same ssid, where oldest 2643 * is determined by the tsf. Note that hardware 2644 * reconfiguration happens through callback to 2645 * ath_newstate as the state machine will go from 2646 * RUN -> RUN when this happens. 2647 */ 2648 if (le64toh(ni->ni_tstamp.tsf) >= tsf) { 2649 DPRINTF(sc, ATH_DEBUG_STATE, 2650 "ibss merge, rstamp %u tsf %ju " 2651 "tstamp %ju\n", rstamp, (uintmax_t)tsf, 2652 (uintmax_t)ni->ni_tstamp.tsf); 2653 (void) ieee80211_ibss_merge(ni); 2654 } 2655 } 2656 break; 2657 } 2658} 2659 2660/* 2661 * Set the default antenna. 2662 */ 2663static void 2664ath_setdefantenna(struct ath_softc *sc, u_int antenna) 2665{ 2666 struct ath_hal *ah = sc->sc_ah; 2667 2668 /* XXX block beacon interrupts */ 2669 ath_hal_setdefantenna(ah, antenna); 2670 if (sc->sc_defant != antenna) 2671 sc->sc_stats.ast_ant_defswitch++; 2672 sc->sc_defant = antenna; 2673 sc->sc_rxotherant = 0; 2674} 2675 2676static int 2677ath_rx_tap(struct ath_softc *sc, struct mbuf *m, 2678 const struct ath_desc *ds, u_int64_t tsf, int16_t nf) 2679{ 2680 u_int8_t rix; 2681 2682 KASSERT(sc->sc_drvbpf != NULL, ("no tap")); 2683 2684 /* 2685 * Discard anything shorter than an ack or cts. 2686 */ 2687 if (m->m_pkthdr.len < IEEE80211_ACK_LEN) { 2688 DPRINTF(sc, ATH_DEBUG_RECV, "%s: runt packet %d\n", 2689 __func__, m->m_pkthdr.len); 2690 sc->sc_stats.ast_rx_tooshort++; 2691 return 0; 2692 } 2693 sc->sc_rx_th.wr_tsf = htole64( 2694 ath_extend_tsf(ds->ds_rxstat.rs_tstamp, tsf)); 2695 rix = ds->ds_rxstat.rs_rate; 2696 sc->sc_rx_th.wr_flags = sc->sc_hwmap[rix].rxflags; 2697 if (ds->ds_rxstat.rs_status & HAL_RXERR_CRC) 2698 sc->sc_rx_th.wr_flags |= IEEE80211_RADIOTAP_F_BADFCS; 2699 /* XXX propagate other error flags from descriptor */ 2700 sc->sc_rx_th.wr_rate = sc->sc_hwmap[rix].ieeerate; 2701 sc->sc_rx_th.wr_antsignal = ds->ds_rxstat.rs_rssi + nf; 2702 sc->sc_rx_th.wr_antnoise = nf; 2703 sc->sc_rx_th.wr_antenna = ds->ds_rxstat.rs_antenna; 2704 2705 bpf_mtap2(sc->sc_drvbpf, &sc->sc_rx_th, sc->sc_rx_th_len, m); 2706 2707 return 1; 2708} 2709 2710static void 2711ath_rx_proc(void *arg, int npending) 2712{ 2713#define PA2DESC(_sc, _pa) \ 2714 ((struct ath_desc *)((caddr_t)(_sc)->sc_rxdma.dd_desc + \ 2715 ((_pa) - (_sc)->sc_rxdma.dd_desc_paddr))) 2716 struct ath_softc *sc = arg; 2717 struct ath_buf *bf; 2718 struct ieee80211com *ic = &sc->sc_ic; 2719 struct ifnet *ifp = sc->sc_ifp; 2720 struct ath_hal *ah = sc->sc_ah; 2721 struct ath_desc *ds; 2722 struct mbuf *m; 2723 struct ieee80211_node *ni; 2724 struct ath_node *an;
|
2711 int len, type;
|
2725 int len, type, ngood; |
2726 u_int phyerr; 2727 HAL_STATUS status; 2728 int16_t nf; 2729 u_int64_t tsf; 2730 2731 NET_LOCK_GIANT(); /* XXX */ 2732 2733 DPRINTF(sc, ATH_DEBUG_RX_PROC, "%s: pending %u\n", __func__, npending);
|
2734 ngood = 0; |
2735 nf = ath_hal_getchannoise(ah, &sc->sc_curchan); 2736 tsf = ath_hal_gettsf64(ah); 2737 do { 2738 bf = STAILQ_FIRST(&sc->sc_rxbuf); 2739 if (bf == NULL) { /* NB: shouldn't happen */ 2740 if_printf(ifp, "%s: no buffer!\n", __func__); 2741 break; 2742 } 2743 ds = bf->bf_desc; 2744 if (ds->ds_link == bf->bf_daddr) { 2745 /* NB: never process the self-linked entry at the end */ 2746 break; 2747 } 2748 m = bf->bf_m; 2749 if (m == NULL) { /* NB: shouldn't happen */ 2750 if_printf(ifp, "%s: no mbuf!\n", __func__); 2751 continue; 2752 } 2753 /* XXX sync descriptor memory */ 2754 /* 2755 * Must provide the virtual address of the current 2756 * descriptor, the physical address, and the virtual 2757 * address of the next descriptor in the h/w chain. 2758 * This allows the HAL to look ahead to see if the 2759 * hardware is done with a descriptor by checking the 2760 * done bit in the following descriptor and the address 2761 * of the current descriptor the DMA engine is working 2762 * on. All this is necessary because of our use of 2763 * a self-linked list to avoid rx overruns. 2764 */ 2765 status = ath_hal_rxprocdesc(ah, ds, 2766 bf->bf_daddr, PA2DESC(sc, ds->ds_link)); 2767#ifdef AR_DEBUG 2768 if (sc->sc_debug & ATH_DEBUG_RECV_DESC) 2769 ath_printrxbuf(bf, status == HAL_OK); 2770#endif 2771 if (status == HAL_EINPROGRESS) 2772 break; 2773 STAILQ_REMOVE_HEAD(&sc->sc_rxbuf, bf_list); 2774 if (ds->ds_rxstat.rs_more) { 2775 /* 2776 * Frame spans multiple descriptors; this 2777 * cannot happen yet as we don't support 2778 * jumbograms. If not in monitor mode, 2779 * discard the frame. 2780 */ 2781 if (ic->ic_opmode != IEEE80211_M_MONITOR) { 2782 sc->sc_stats.ast_rx_toobig++; 2783 goto rx_next; 2784 } 2785 /* fall thru for monitor mode handling... */ 2786 } else if (ds->ds_rxstat.rs_status != 0) { 2787 if (ds->ds_rxstat.rs_status & HAL_RXERR_CRC) 2788 sc->sc_stats.ast_rx_crcerr++; 2789 if (ds->ds_rxstat.rs_status & HAL_RXERR_FIFO) 2790 sc->sc_stats.ast_rx_fifoerr++; 2791 if (ds->ds_rxstat.rs_status & HAL_RXERR_PHY) { 2792 sc->sc_stats.ast_rx_phyerr++; 2793 phyerr = ds->ds_rxstat.rs_phyerr & 0x1f; 2794 sc->sc_stats.ast_rx_phy[phyerr]++; 2795 goto rx_next; 2796 } 2797 if (ds->ds_rxstat.rs_status & HAL_RXERR_DECRYPT) { 2798 /* 2799 * Decrypt error. If the error occurred 2800 * because there was no hardware key, then 2801 * let the frame through so the upper layers 2802 * can process it. This is necessary for 5210 2803 * parts which have no way to setup a ``clear'' 2804 * key cache entry. 2805 * 2806 * XXX do key cache faulting 2807 */ 2808 if (ds->ds_rxstat.rs_keyix == HAL_RXKEYIX_INVALID) 2809 goto rx_accept; 2810 sc->sc_stats.ast_rx_badcrypt++; 2811 } 2812 if (ds->ds_rxstat.rs_status & HAL_RXERR_MIC) { 2813 sc->sc_stats.ast_rx_badmic++; 2814 /* 2815 * Do minimal work required to hand off 2816 * the 802.11 header for notifcation. 2817 */ 2818 /* XXX frag's and qos frames */ 2819 len = ds->ds_rxstat.rs_datalen; 2820 if (len >= sizeof (struct ieee80211_frame)) { 2821 bus_dmamap_sync(sc->sc_dmat, 2822 bf->bf_dmamap, 2823 BUS_DMASYNC_POSTREAD); 2824 ieee80211_notify_michael_failure(ic, 2825 mtod(m, struct ieee80211_frame *), 2826 sc->sc_splitmic ? 2827 ds->ds_rxstat.rs_keyix-32 : 2828 ds->ds_rxstat.rs_keyix 2829 ); 2830 } 2831 } 2832 ifp->if_ierrors++; 2833 /* 2834 * When a tap is present pass error frames 2835 * that have been requested. By default we 2836 * pass decrypt+mic errors but others may be 2837 * interesting (e.g. crc). 2838 */ 2839 if (sc->sc_drvbpf != NULL && 2840 (ds->ds_rxstat.rs_status & sc->sc_monpass)) { 2841 bus_dmamap_sync(sc->sc_dmat, bf->bf_dmamap, 2842 BUS_DMASYNC_POSTREAD); 2843 /* NB: bpf needs the mbuf length setup */ 2844 len = ds->ds_rxstat.rs_datalen; 2845 m->m_pkthdr.len = m->m_len = len; 2846 (void) ath_rx_tap(sc, m, ds, tsf, nf); 2847 } 2848 /* XXX pass MIC errors up for s/w reclaculation */ 2849 goto rx_next; 2850 } 2851rx_accept: 2852 /* 2853 * Sync and unmap the frame. At this point we're 2854 * committed to passing the mbuf somewhere so clear 2855 * bf_m; this means a new sk_buff must be allocated 2856 * when the rx descriptor is setup again to receive 2857 * another frame. 2858 */ 2859 bus_dmamap_sync(sc->sc_dmat, bf->bf_dmamap, 2860 BUS_DMASYNC_POSTREAD); 2861 bus_dmamap_unload(sc->sc_dmat, bf->bf_dmamap); 2862 bf->bf_m = NULL; 2863 2864 m->m_pkthdr.rcvif = ifp; 2865 len = ds->ds_rxstat.rs_datalen; 2866 m->m_pkthdr.len = m->m_len = len; 2867 2868 sc->sc_stats.ast_ant_rx[ds->ds_rxstat.rs_antenna]++; 2869 2870 if (sc->sc_drvbpf != NULL && !ath_rx_tap(sc, m, ds, tsf, nf)) { 2871 m_freem(m); /* XXX reclaim */ 2872 goto rx_next; 2873 } 2874 2875 /* 2876 * From this point on we assume the frame is at least 2877 * as large as ieee80211_frame_min; verify that. 2878 */ 2879 if (len < IEEE80211_MIN_LEN) { 2880 DPRINTF(sc, ATH_DEBUG_RECV, "%s: short packet %d\n", 2881 __func__, len); 2882 sc->sc_stats.ast_rx_tooshort++; 2883 m_freem(m); 2884 goto rx_next; 2885 } 2886 2887 if (IFF_DUMPPKTS(sc, ATH_DEBUG_RECV)) { 2888 ieee80211_dump_pkt(mtod(m, caddr_t), len, 2889 sc->sc_hwmap[ds->ds_rxstat.rs_rate].ieeerate, 2890 ds->ds_rxstat.rs_rssi); 2891 } 2892 2893 m_adj(m, -IEEE80211_CRC_LEN); 2894 2895 /* 2896 * Locate the node for sender, track state, and then 2897 * pass the (referenced) node up to the 802.11 layer 2898 * for its use. 2899 */ 2900 ni = ieee80211_find_rxnode_withkey(ic, 2901 mtod(m, const struct ieee80211_frame_min *), 2902 ds->ds_rxstat.rs_keyix == HAL_RXKEYIX_INVALID ? 2903 IEEE80211_KEYIX_NONE : ds->ds_rxstat.rs_keyix); 2904 /* 2905 * Track rx rssi and do any rx antenna management. 2906 */ 2907 an = ATH_NODE(ni); 2908 ATH_RSSI_LPF(an->an_avgrssi, ds->ds_rxstat.rs_rssi); 2909 ATH_RSSI_LPF(sc->sc_halstats.ns_avgrssi, ds->ds_rxstat.rs_rssi); 2910 /* 2911 * Send frame up for processing. 2912 */ 2913 type = ieee80211_input(ic, m, ni, 2914 ds->ds_rxstat.rs_rssi, ds->ds_rxstat.rs_tstamp); 2915 ieee80211_free_node(ni); 2916 if (sc->sc_diversity) { 2917 /* 2918 * When using fast diversity, change the default rx 2919 * antenna if diversity chooses the other antenna 3 2920 * times in a row. 2921 */ 2922 if (sc->sc_defant != ds->ds_rxstat.rs_antenna) { 2923 if (++sc->sc_rxotherant >= 3) 2924 ath_setdefantenna(sc, 2925 ds->ds_rxstat.rs_antenna); 2926 } else 2927 sc->sc_rxotherant = 0; 2928 } 2929 if (sc->sc_softled) { 2930 /* 2931 * Blink for any data frame. Otherwise do a 2932 * heartbeat-style blink when idle. The latter 2933 * is mainly for station mode where we depend on 2934 * periodic beacon frames to trigger the poll event. 2935 */ 2936 if (type == IEEE80211_FC0_TYPE_DATA) { 2937 sc->sc_rxrate = ds->ds_rxstat.rs_rate; 2938 ath_led_event(sc, ATH_LED_RX); 2939 } else if (ticks - sc->sc_ledevent >= sc->sc_ledidle) 2940 ath_led_event(sc, ATH_LED_POLL); 2941 }
|
2942 /* 2943 * Arrange to update the last rx timestamp only for 2944 * frames from our ap when operating in station mode. 2945 * This assumes the rx key is always setup when associated. 2946 */ 2947 if (ic->ic_opmode == IEEE80211_M_STA && 2948 ds->ds_rxstat.rs_keyix != HAL_RXKEYIX_INVALID) 2949 ngood++; |
2950rx_next: 2951 STAILQ_INSERT_TAIL(&sc->sc_rxbuf, bf, bf_list); 2952 } while (ath_rxbuf_init(sc, bf) == 0); 2953 2954 /* rx signal state monitoring */ 2955 ath_hal_rxmonitor(ah, &sc->sc_halstats);
|
2956 if (ngood) 2957 sc->sc_lastrx = tsf; |
2958 2959 NET_UNLOCK_GIANT(); /* XXX */ 2960#undef PA2DESC 2961} 2962 2963/* 2964 * Setup a h/w transmit queue. 2965 */ 2966static struct ath_txq * 2967ath_txq_setup(struct ath_softc *sc, int qtype, int subtype) 2968{ 2969#define N(a) (sizeof(a)/sizeof(a[0])) 2970 struct ath_hal *ah = sc->sc_ah; 2971 HAL_TXQ_INFO qi; 2972 int qnum; 2973 2974 memset(&qi, 0, sizeof(qi)); 2975 qi.tqi_subtype = subtype; 2976 qi.tqi_aifs = HAL_TXQ_USEDEFAULT; 2977 qi.tqi_cwmin = HAL_TXQ_USEDEFAULT; 2978 qi.tqi_cwmax = HAL_TXQ_USEDEFAULT; 2979 /* 2980 * Enable interrupts only for EOL and DESC conditions. 2981 * We mark tx descriptors to receive a DESC interrupt 2982 * when a tx queue gets deep; otherwise waiting for the 2983 * EOL to reap descriptors. Note that this is done to 2984 * reduce interrupt load and this only defers reaping 2985 * descriptors, never transmitting frames. Aside from 2986 * reducing interrupts this also permits more concurrency. 2987 * The only potential downside is if the tx queue backs 2988 * up in which case the top half of the kernel may backup 2989 * due to a lack of tx descriptors. 2990 */ 2991 qi.tqi_qflags = TXQ_FLAG_TXEOLINT_ENABLE | TXQ_FLAG_TXDESCINT_ENABLE; 2992 qnum = ath_hal_setuptxqueue(ah, qtype, &qi); 2993 if (qnum == -1) { 2994 /* 2995 * NB: don't print a message, this happens 2996 * normally on parts with too few tx queues 2997 */ 2998 return NULL; 2999 } 3000 if (qnum >= N(sc->sc_txq)) { 3001 device_printf(sc->sc_dev, 3002 "hal qnum %u out of range, max %zu!\n", 3003 qnum, N(sc->sc_txq)); 3004 ath_hal_releasetxqueue(ah, qnum); 3005 return NULL; 3006 } 3007 if (!ATH_TXQ_SETUP(sc, qnum)) { 3008 struct ath_txq *txq = &sc->sc_txq[qnum]; 3009 3010 txq->axq_qnum = qnum; 3011 txq->axq_depth = 0; 3012 txq->axq_intrcnt = 0; 3013 txq->axq_link = NULL; 3014 STAILQ_INIT(&txq->axq_q); 3015 ATH_TXQ_LOCK_INIT(sc, txq); 3016 sc->sc_txqsetup |= 1<<qnum; 3017 } 3018 return &sc->sc_txq[qnum]; 3019#undef N 3020} 3021 3022/* 3023 * Setup a hardware data transmit queue for the specified 3024 * access control. The hal may not support all requested 3025 * queues in which case it will return a reference to a 3026 * previously setup queue. We record the mapping from ac's 3027 * to h/w queues for use by ath_tx_start and also track 3028 * the set of h/w queues being used to optimize work in the 3029 * transmit interrupt handler and related routines. 3030 */ 3031static int 3032ath_tx_setup(struct ath_softc *sc, int ac, int haltype) 3033{ 3034#define N(a) (sizeof(a)/sizeof(a[0])) 3035 struct ath_txq *txq; 3036 3037 if (ac >= N(sc->sc_ac2q)) { 3038 device_printf(sc->sc_dev, "AC %u out of range, max %zu!\n", 3039 ac, N(sc->sc_ac2q)); 3040 return 0; 3041 } 3042 txq = ath_txq_setup(sc, HAL_TX_QUEUE_DATA, haltype); 3043 if (txq != NULL) { 3044 sc->sc_ac2q[ac] = txq; 3045 return 1; 3046 } else 3047 return 0; 3048#undef N 3049} 3050 3051/* 3052 * Update WME parameters for a transmit queue. 3053 */ 3054static int 3055ath_txq_update(struct ath_softc *sc, int ac) 3056{ 3057#define ATH_EXPONENT_TO_VALUE(v) ((1<<v)-1) 3058#define ATH_TXOP_TO_US(v) (v<<5) 3059 struct ieee80211com *ic = &sc->sc_ic; 3060 struct ath_txq *txq = sc->sc_ac2q[ac]; 3061 struct wmeParams *wmep = &ic->ic_wme.wme_chanParams.cap_wmeParams[ac]; 3062 struct ath_hal *ah = sc->sc_ah; 3063 HAL_TXQ_INFO qi; 3064 3065 ath_hal_gettxqueueprops(ah, txq->axq_qnum, &qi); 3066 qi.tqi_aifs = wmep->wmep_aifsn; 3067 qi.tqi_cwmin = ATH_EXPONENT_TO_VALUE(wmep->wmep_logcwmin); 3068 qi.tqi_cwmax = ATH_EXPONENT_TO_VALUE(wmep->wmep_logcwmax); 3069 qi.tqi_burstTime = ATH_TXOP_TO_US(wmep->wmep_txopLimit); 3070 3071 if (!ath_hal_settxqueueprops(ah, txq->axq_qnum, &qi)) { 3072 device_printf(sc->sc_dev, "unable to update hardware queue " 3073 "parameters for %s traffic!\n", 3074 ieee80211_wme_acnames[ac]); 3075 return 0; 3076 } else { 3077 ath_hal_resettxqueue(ah, txq->axq_qnum); /* push to h/w */ 3078 return 1; 3079 } 3080#undef ATH_TXOP_TO_US 3081#undef ATH_EXPONENT_TO_VALUE 3082} 3083 3084/* 3085 * Callback from the 802.11 layer to update WME parameters. 3086 */ 3087static int 3088ath_wme_update(struct ieee80211com *ic) 3089{ 3090 struct ath_softc *sc = ic->ic_ifp->if_softc; 3091 3092 return !ath_txq_update(sc, WME_AC_BE) || 3093 !ath_txq_update(sc, WME_AC_BK) || 3094 !ath_txq_update(sc, WME_AC_VI) || 3095 !ath_txq_update(sc, WME_AC_VO) ? EIO : 0; 3096} 3097 3098/* 3099 * Reclaim resources for a setup queue. 3100 */ 3101static void 3102ath_tx_cleanupq(struct ath_softc *sc, struct ath_txq *txq) 3103{ 3104 3105 ath_hal_releasetxqueue(sc->sc_ah, txq->axq_qnum); 3106 ATH_TXQ_LOCK_DESTROY(txq); 3107 sc->sc_txqsetup &= ~(1<<txq->axq_qnum); 3108} 3109 3110/* 3111 * Reclaim all tx queue resources. 3112 */ 3113static void 3114ath_tx_cleanup(struct ath_softc *sc) 3115{ 3116 int i; 3117 3118 ATH_TXBUF_LOCK_DESTROY(sc); 3119 for (i = 0; i < HAL_NUM_TX_QUEUES; i++) 3120 if (ATH_TXQ_SETUP(sc, i)) 3121 ath_tx_cleanupq(sc, &sc->sc_txq[i]); 3122} 3123 3124/* 3125 * Defragment an mbuf chain, returning at most maxfrags separate 3126 * mbufs+clusters. If this is not possible NULL is returned and 3127 * the original mbuf chain is left in it's present (potentially 3128 * modified) state. We use two techniques: collapsing consecutive 3129 * mbufs and replacing consecutive mbufs by a cluster. 3130 */ 3131static struct mbuf * 3132ath_defrag(struct mbuf *m0, int how, int maxfrags) 3133{ 3134 struct mbuf *m, *n, *n2, **prev; 3135 u_int curfrags; 3136 3137 /* 3138 * Calculate the current number of frags. 3139 */ 3140 curfrags = 0; 3141 for (m = m0; m != NULL; m = m->m_next) 3142 curfrags++; 3143 /* 3144 * First, try to collapse mbufs. Note that we always collapse 3145 * towards the front so we don't need to deal with moving the 3146 * pkthdr. This may be suboptimal if the first mbuf has much 3147 * less data than the following. 3148 */ 3149 m = m0; 3150again: 3151 for (;;) { 3152 n = m->m_next; 3153 if (n == NULL) 3154 break; 3155 if ((m->m_flags & M_RDONLY) == 0 && 3156 n->m_len < M_TRAILINGSPACE(m)) { 3157 bcopy(mtod(n, void *), mtod(m, char *) + m->m_len, 3158 n->m_len); 3159 m->m_len += n->m_len; 3160 m->m_next = n->m_next; 3161 m_free(n); 3162 if (--curfrags <= maxfrags) 3163 return m0; 3164 } else 3165 m = n; 3166 } 3167 KASSERT(maxfrags > 1, 3168 ("maxfrags %u, but normal collapse failed", maxfrags)); 3169 /* 3170 * Collapse consecutive mbufs to a cluster. 3171 */ 3172 prev = &m0->m_next; /* NB: not the first mbuf */ 3173 while ((n = *prev) != NULL) { 3174 if ((n2 = n->m_next) != NULL && 3175 n->m_len + n2->m_len < MCLBYTES) { 3176 m = m_getcl(how, MT_DATA, 0); 3177 if (m == NULL) 3178 goto bad; 3179 bcopy(mtod(n, void *), mtod(m, void *), n->m_len); 3180 bcopy(mtod(n2, void *), mtod(m, char *) + n->m_len, 3181 n2->m_len); 3182 m->m_len = n->m_len + n2->m_len; 3183 m->m_next = n2->m_next; 3184 *prev = m; 3185 m_free(n); 3186 m_free(n2); 3187 if (--curfrags <= maxfrags) /* +1 cl -2 mbufs */ 3188 return m0; 3189 /* 3190 * Still not there, try the normal collapse 3191 * again before we allocate another cluster. 3192 */ 3193 goto again; 3194 } 3195 prev = &n->m_next; 3196 } 3197 /* 3198 * No place where we can collapse to a cluster; punt. 3199 * This can occur if, for example, you request 2 frags 3200 * but the packet requires that both be clusters (we 3201 * never reallocate the first mbuf to avoid moving the 3202 * packet header). 3203 */ 3204bad: 3205 return NULL; 3206} 3207 3208/* 3209 * Return h/w rate index for an IEEE rate (w/o basic rate bit). 3210 */ 3211static int 3212ath_tx_findrix(const HAL_RATE_TABLE *rt, int rate) 3213{ 3214 int i; 3215 3216 for (i = 0; i < rt->rateCount; i++) 3217 if ((rt->info[i].dot11Rate & IEEE80211_RATE_VAL) == rate) 3218 return i; 3219 return 0; /* NB: lowest rate */ 3220} 3221 3222static int 3223ath_tx_start(struct ath_softc *sc, struct ieee80211_node *ni, struct ath_buf *bf, 3224 struct mbuf *m0) 3225{ 3226 struct ieee80211com *ic = &sc->sc_ic; 3227 struct ath_hal *ah = sc->sc_ah; 3228 struct ifnet *ifp = sc->sc_ifp; 3229 const struct chanAccParams *cap = &ic->ic_wme.wme_chanParams; 3230 int i, error, iswep, ismcast, ismrr; 3231 int keyix, hdrlen, pktlen, try0; 3232 u_int8_t rix, txrate, ctsrate; 3233 u_int8_t cix = 0xff; /* NB: silence compiler */ 3234 struct ath_desc *ds, *ds0; 3235 struct ath_txq *txq; 3236 struct ieee80211_frame *wh; 3237 u_int subtype, flags, ctsduration; 3238 HAL_PKT_TYPE atype; 3239 const HAL_RATE_TABLE *rt; 3240 HAL_BOOL shortPreamble; 3241 struct ath_node *an; 3242 struct mbuf *m; 3243 u_int pri; 3244 3245 wh = mtod(m0, struct ieee80211_frame *); 3246 iswep = wh->i_fc[1] & IEEE80211_FC1_WEP; 3247 ismcast = IEEE80211_IS_MULTICAST(wh->i_addr1); 3248 hdrlen = ieee80211_anyhdrsize(wh); 3249 /* 3250 * Packet length must not include any 3251 * pad bytes; deduct them here. 3252 */ 3253 pktlen = m0->m_pkthdr.len - (hdrlen & 3); 3254 3255 if (iswep) { 3256 const struct ieee80211_cipher *cip; 3257 struct ieee80211_key *k; 3258 3259 /* 3260 * Construct the 802.11 header+trailer for an encrypted 3261 * frame. The only reason this can fail is because of an 3262 * unknown or unsupported cipher/key type. 3263 */ 3264 k = ieee80211_crypto_encap(ic, ni, m0); 3265 if (k == NULL) { 3266 /* 3267 * This can happen when the key is yanked after the 3268 * frame was queued. Just discard the frame; the 3269 * 802.11 layer counts failures and provides 3270 * debugging/diagnostics. 3271 */ 3272 m_freem(m0); 3273 return EIO; 3274 } 3275 /* 3276 * Adjust the packet + header lengths for the crypto 3277 * additions and calculate the h/w key index. When 3278 * a s/w mic is done the frame will have had any mic 3279 * added to it prior to entry so skb->len above will 3280 * account for it. Otherwise we need to add it to the 3281 * packet length. 3282 */ 3283 cip = k->wk_cipher; 3284 hdrlen += cip->ic_header; 3285 pktlen += cip->ic_header + cip->ic_trailer; 3286 if ((k->wk_flags & IEEE80211_KEY_SWMIC) == 0) 3287 pktlen += cip->ic_miclen; 3288 keyix = k->wk_keyix; 3289 3290 /* packet header may have moved, reset our local pointer */ 3291 wh = mtod(m0, struct ieee80211_frame *); 3292 } else if (ni->ni_ucastkey.wk_cipher == &ieee80211_cipher_none) { 3293 /* 3294 * Use station key cache slot, if assigned. 3295 */ 3296 keyix = ni->ni_ucastkey.wk_keyix; 3297 if (keyix == IEEE80211_KEYIX_NONE) 3298 keyix = HAL_TXKEYIX_INVALID; 3299 } else 3300 keyix = HAL_TXKEYIX_INVALID; 3301 3302 pktlen += IEEE80211_CRC_LEN; 3303 3304 /* 3305 * Load the DMA map so any coalescing is done. This 3306 * also calculates the number of descriptors we need. 3307 */ 3308 error = bus_dmamap_load_mbuf_sg(sc->sc_dmat, bf->bf_dmamap, m0, 3309 bf->bf_segs, &bf->bf_nseg, 3310 BUS_DMA_NOWAIT); 3311 if (error == EFBIG) { 3312 /* XXX packet requires too many descriptors */ 3313 bf->bf_nseg = ATH_TXDESC+1; 3314 } else if (error != 0) { 3315 sc->sc_stats.ast_tx_busdma++; 3316 m_freem(m0); 3317 return error; 3318 } 3319 /* 3320 * Discard null packets and check for packets that 3321 * require too many TX descriptors. We try to convert 3322 * the latter to a cluster. 3323 */ 3324 if (bf->bf_nseg > ATH_TXDESC) { /* too many desc's, linearize */ 3325 sc->sc_stats.ast_tx_linear++; 3326 m = ath_defrag(m0, M_DONTWAIT, ATH_TXDESC); 3327 if (m == NULL) { 3328 m_freem(m0); 3329 sc->sc_stats.ast_tx_nombuf++; 3330 return ENOMEM; 3331 } 3332 m0 = m; 3333 error = bus_dmamap_load_mbuf_sg(sc->sc_dmat, bf->bf_dmamap, m0, 3334 bf->bf_segs, &bf->bf_nseg, 3335 BUS_DMA_NOWAIT); 3336 if (error != 0) { 3337 sc->sc_stats.ast_tx_busdma++; 3338 m_freem(m0); 3339 return error; 3340 } 3341 KASSERT(bf->bf_nseg <= ATH_TXDESC, 3342 ("too many segments after defrag; nseg %u", bf->bf_nseg)); 3343 } else if (bf->bf_nseg == 0) { /* null packet, discard */ 3344 sc->sc_stats.ast_tx_nodata++; 3345 m_freem(m0); 3346 return EIO; 3347 } 3348 DPRINTF(sc, ATH_DEBUG_XMIT, "%s: m %p len %u\n", __func__, m0, pktlen); 3349 bus_dmamap_sync(sc->sc_dmat, bf->bf_dmamap, BUS_DMASYNC_PREWRITE); 3350 bf->bf_m = m0; 3351 bf->bf_node = ni; /* NB: held reference */ 3352 3353 /* setup descriptors */ 3354 ds = bf->bf_desc; 3355 rt = sc->sc_currates; 3356 KASSERT(rt != NULL, ("no rate table, mode %u", sc->sc_curmode)); 3357 3358 /* 3359 * NB: the 802.11 layer marks whether or not we should 3360 * use short preamble based on the current mode and 3361 * negotiated parameters. 3362 */ 3363 if ((ic->ic_flags & IEEE80211_F_SHPREAMBLE) && 3364 (ni->ni_capinfo & IEEE80211_CAPINFO_SHORT_PREAMBLE)) { 3365 shortPreamble = AH_TRUE; 3366 sc->sc_stats.ast_tx_shortpre++; 3367 } else { 3368 shortPreamble = AH_FALSE; 3369 } 3370 3371 an = ATH_NODE(ni); 3372 flags = HAL_TXDESC_CLRDMASK; /* XXX needed for crypto errs */ 3373 ismrr = 0; /* default no multi-rate retry*/ 3374 /* 3375 * Calculate Atheros packet type from IEEE80211 packet header, 3376 * setup for rate calculations, and select h/w transmit queue. 3377 */ 3378 switch (wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK) { 3379 case IEEE80211_FC0_TYPE_MGT: 3380 subtype = wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK; 3381 if (subtype == IEEE80211_FC0_SUBTYPE_BEACON) 3382 atype = HAL_PKT_TYPE_BEACON; 3383 else if (subtype == IEEE80211_FC0_SUBTYPE_PROBE_RESP) 3384 atype = HAL_PKT_TYPE_PROBE_RESP; 3385 else if (subtype == IEEE80211_FC0_SUBTYPE_ATIM) 3386 atype = HAL_PKT_TYPE_ATIM; 3387 else 3388 atype = HAL_PKT_TYPE_NORMAL; /* XXX */ 3389 rix = sc->sc_minrateix; 3390 txrate = rt->info[rix].rateCode; 3391 if (shortPreamble) 3392 txrate |= rt->info[rix].shortPreamble; 3393 try0 = ATH_TXMGTTRY; 3394 /* NB: force all management frames to highest queue */ 3395 if (ni->ni_flags & IEEE80211_NODE_QOS) { 3396 /* NB: force all management frames to highest queue */ 3397 pri = WME_AC_VO; 3398 } else 3399 pri = WME_AC_BE; 3400 flags |= HAL_TXDESC_INTREQ; /* force interrupt */ 3401 break; 3402 case IEEE80211_FC0_TYPE_CTL: 3403 atype = HAL_PKT_TYPE_PSPOLL; /* stop setting of duration */ 3404 rix = sc->sc_minrateix; 3405 txrate = rt->info[rix].rateCode; 3406 if (shortPreamble) 3407 txrate |= rt->info[rix].shortPreamble; 3408 try0 = ATH_TXMGTTRY; 3409 /* NB: force all ctl frames to highest queue */ 3410 if (ni->ni_flags & IEEE80211_NODE_QOS) { 3411 /* NB: force all ctl frames to highest queue */ 3412 pri = WME_AC_VO; 3413 } else 3414 pri = WME_AC_BE; 3415 flags |= HAL_TXDESC_INTREQ; /* force interrupt */ 3416 break; 3417 case IEEE80211_FC0_TYPE_DATA: 3418 atype = HAL_PKT_TYPE_NORMAL; /* default */ 3419 /* 3420 * Data frames: multicast frames go out at a fixed rate, 3421 * otherwise consult the rate control module for the 3422 * rate to use. 3423 */ 3424 if (ismcast) { 3425 /* 3426 * Check mcast rate setting in case it's changed. 3427 * XXX move out of fastpath 3428 */ 3429 if (ic->ic_mcast_rate != sc->sc_mcastrate) { 3430 sc->sc_mcastrix = 3431 ath_tx_findrix(rt, ic->ic_mcast_rate); 3432 sc->sc_mcastrate = ic->ic_mcast_rate; 3433 } 3434 rix = sc->sc_mcastrix; 3435 txrate = rt->info[rix].rateCode; 3436 if (shortPreamble) 3437 txrate |= rt->info[rix].shortPreamble; 3438 try0 = 1; 3439 } else { 3440 ath_rate_findrate(sc, an, shortPreamble, pktlen, 3441 &rix, &try0, &txrate); 3442 sc->sc_txrate = txrate; /* for LED blinking */ 3443 if (try0 != ATH_TXMAXTRY) 3444 ismrr = 1; 3445 } 3446 /* 3447 * Default all non-QoS traffic to the background queue. 3448 */ 3449 if (wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_QOS) { 3450 pri = M_WME_GETAC(m0); 3451 if (cap->cap_wmeParams[pri].wmep_noackPolicy) { 3452 flags |= HAL_TXDESC_NOACK; 3453 sc->sc_stats.ast_tx_noack++; 3454 } 3455 } else 3456 pri = WME_AC_BE; 3457 break; 3458 default: 3459 if_printf(ifp, "bogus frame type 0x%x (%s)\n", 3460 wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK, __func__); 3461 /* XXX statistic */ 3462 m_freem(m0); 3463 return EIO; 3464 } 3465 txq = sc->sc_ac2q[pri]; 3466 3467 /* 3468 * When servicing one or more stations in power-save mode 3469 * multicast frames must be buffered until after the beacon. 3470 * We use the CAB queue for that. 3471 */ 3472 if (ismcast && ic->ic_ps_sta) { 3473 txq = sc->sc_cabq; 3474 /* XXX? more bit in 802.11 frame header */ 3475 } 3476 3477 /* 3478 * Calculate miscellaneous flags. 3479 */ 3480 if (ismcast) { 3481 flags |= HAL_TXDESC_NOACK; /* no ack on broad/multicast */ 3482 sc->sc_stats.ast_tx_noack++; 3483 } else if (pktlen > ic->ic_rtsthreshold) { 3484 flags |= HAL_TXDESC_RTSENA; /* RTS based on frame length */ 3485 cix = rt->info[rix].controlRate; 3486 sc->sc_stats.ast_tx_rts++; 3487 } 3488 3489 /* 3490 * If 802.11g protection is enabled, determine whether 3491 * to use RTS/CTS or just CTS. Note that this is only 3492 * done for OFDM unicast frames. 3493 */ 3494 if ((ic->ic_flags & IEEE80211_F_USEPROT) && 3495 rt->info[rix].phy == IEEE80211_T_OFDM && 3496 (flags & HAL_TXDESC_NOACK) == 0) { 3497 /* XXX fragments must use CCK rates w/ protection */ 3498 if (ic->ic_protmode == IEEE80211_PROT_RTSCTS) 3499 flags |= HAL_TXDESC_RTSENA; 3500 else if (ic->ic_protmode == IEEE80211_PROT_CTSONLY) 3501 flags |= HAL_TXDESC_CTSENA; 3502 cix = rt->info[sc->sc_protrix].controlRate; 3503 sc->sc_stats.ast_tx_protect++; 3504 } 3505 3506 /* 3507 * Calculate duration. This logically belongs in the 802.11 3508 * layer but it lacks sufficient information to calculate it. 3509 */ 3510 if ((flags & HAL_TXDESC_NOACK) == 0 && 3511 (wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK) != IEEE80211_FC0_TYPE_CTL) { 3512 u_int16_t dur; 3513 /* 3514 * XXX not right with fragmentation. 3515 */ 3516 if (shortPreamble) 3517 dur = rt->info[rix].spAckDuration; 3518 else 3519 dur = rt->info[rix].lpAckDuration; 3520 *(u_int16_t *)wh->i_dur = htole16(dur); 3521 } 3522 3523 /* 3524 * Calculate RTS/CTS rate and duration if needed. 3525 */ 3526 ctsduration = 0; 3527 if (flags & (HAL_TXDESC_RTSENA|HAL_TXDESC_CTSENA)) { 3528 /* 3529 * CTS transmit rate is derived from the transmit rate 3530 * by looking in the h/w rate table. We must also factor 3531 * in whether or not a short preamble is to be used. 3532 */ 3533 /* NB: cix is set above where RTS/CTS is enabled */ 3534 KASSERT(cix != 0xff, ("cix not setup")); 3535 ctsrate = rt->info[cix].rateCode; 3536 /* 3537 * Compute the transmit duration based on the frame 3538 * size and the size of an ACK frame. We call into the 3539 * HAL to do the computation since it depends on the 3540 * characteristics of the actual PHY being used. 3541 * 3542 * NB: CTS is assumed the same size as an ACK so we can 3543 * use the precalculated ACK durations. 3544 */ 3545 if (shortPreamble) { 3546 ctsrate |= rt->info[cix].shortPreamble; 3547 if (flags & HAL_TXDESC_RTSENA) /* SIFS + CTS */ 3548 ctsduration += rt->info[cix].spAckDuration; 3549 ctsduration += ath_hal_computetxtime(ah, 3550 rt, pktlen, rix, AH_TRUE); 3551 if ((flags & HAL_TXDESC_NOACK) == 0) /* SIFS + ACK */ 3552 ctsduration += rt->info[rix].spAckDuration; 3553 } else { 3554 if (flags & HAL_TXDESC_RTSENA) /* SIFS + CTS */ 3555 ctsduration += rt->info[cix].lpAckDuration; 3556 ctsduration += ath_hal_computetxtime(ah, 3557 rt, pktlen, rix, AH_FALSE); 3558 if ((flags & HAL_TXDESC_NOACK) == 0) /* SIFS + ACK */ 3559 ctsduration += rt->info[rix].lpAckDuration; 3560 } 3561 /* 3562 * Must disable multi-rate retry when using RTS/CTS. 3563 */ 3564 ismrr = 0; 3565 try0 = ATH_TXMGTTRY; /* XXX */ 3566 } else 3567 ctsrate = 0; 3568 3569 if (IFF_DUMPPKTS(sc, ATH_DEBUG_XMIT)) 3570 ieee80211_dump_pkt(mtod(m0, caddr_t), m0->m_len, 3571 sc->sc_hwmap[txrate].ieeerate, -1); 3572 3573 if (ic->ic_rawbpf) 3574 bpf_mtap(ic->ic_rawbpf, m0); 3575 if (sc->sc_drvbpf) { 3576 u_int64_t tsf = ath_hal_gettsf64(ah); 3577 3578 sc->sc_tx_th.wt_tsf = htole64(tsf); 3579 sc->sc_tx_th.wt_flags = sc->sc_hwmap[txrate].txflags; 3580 if (iswep) 3581 sc->sc_tx_th.wt_flags |= IEEE80211_RADIOTAP_F_WEP; 3582 sc->sc_tx_th.wt_rate = sc->sc_hwmap[txrate].ieeerate; 3583 sc->sc_tx_th.wt_txpower = ni->ni_txpower; 3584 sc->sc_tx_th.wt_antenna = sc->sc_txantenna; 3585 3586 bpf_mtap2(sc->sc_drvbpf, 3587 &sc->sc_tx_th, sc->sc_tx_th_len, m0); 3588 } 3589 3590 /* 3591 * Determine if a tx interrupt should be generated for 3592 * this descriptor. We take a tx interrupt to reap 3593 * descriptors when the h/w hits an EOL condition or 3594 * when the descriptor is specifically marked to generate 3595 * an interrupt. We periodically mark descriptors in this 3596 * way to insure timely replenishing of the supply needed 3597 * for sending frames. Defering interrupts reduces system 3598 * load and potentially allows more concurrent work to be 3599 * done but if done to aggressively can cause senders to 3600 * backup. 3601 * 3602 * NB: use >= to deal with sc_txintrperiod changing 3603 * dynamically through sysctl. 3604 */ 3605 if (flags & HAL_TXDESC_INTREQ) { 3606 txq->axq_intrcnt = 0; 3607 } else if (++txq->axq_intrcnt >= sc->sc_txintrperiod) { 3608 flags |= HAL_TXDESC_INTREQ; 3609 txq->axq_intrcnt = 0; 3610 } 3611 3612 /* 3613 * Formulate first tx descriptor with tx controls. 3614 */ 3615 /* XXX check return value? */ 3616 ath_hal_setuptxdesc(ah, ds 3617 , pktlen /* packet length */ 3618 , hdrlen /* header length */ 3619 , atype /* Atheros packet type */ 3620 , ni->ni_txpower /* txpower */ 3621 , txrate, try0 /* series 0 rate/tries */ 3622 , keyix /* key cache index */ 3623 , sc->sc_txantenna /* antenna mode */ 3624 , flags /* flags */ 3625 , ctsrate /* rts/cts rate */ 3626 , ctsduration /* rts/cts duration */ 3627 ); 3628 bf->bf_flags = flags; 3629 /* 3630 * Setup the multi-rate retry state only when we're 3631 * going to use it. This assumes ath_hal_setuptxdesc 3632 * initializes the descriptors (so we don't have to) 3633 * when the hardware supports multi-rate retry and 3634 * we don't use it. 3635 */ 3636 if (ismrr) 3637 ath_rate_setupxtxdesc(sc, an, ds, shortPreamble, rix); 3638 3639 /* 3640 * Fillin the remainder of the descriptor info. 3641 */ 3642 ds0 = ds; 3643 for (i = 0; i < bf->bf_nseg; i++, ds++) { 3644 ds->ds_data = bf->bf_segs[i].ds_addr; 3645 if (i == bf->bf_nseg - 1) 3646 ds->ds_link = 0; 3647 else 3648 ds->ds_link = bf->bf_daddr + sizeof(*ds) * (i + 1); 3649 ath_hal_filltxdesc(ah, ds 3650 , bf->bf_segs[i].ds_len /* segment length */ 3651 , i == 0 /* first segment */ 3652 , i == bf->bf_nseg - 1 /* last segment */ 3653 , ds0 /* first descriptor */ 3654 ); 3655 DPRINTF(sc, ATH_DEBUG_XMIT, 3656 "%s: %d: %08x %08x %08x %08x %08x %08x\n", 3657 __func__, i, ds->ds_link, ds->ds_data, 3658 ds->ds_ctl0, ds->ds_ctl1, ds->ds_hw[0], ds->ds_hw[1]); 3659 } 3660 /* 3661 * Insert the frame on the outbound list and 3662 * pass it on to the hardware. 3663 */ 3664 ATH_TXQ_LOCK(txq); 3665 ATH_TXQ_INSERT_TAIL(txq, bf, bf_list); 3666 if (txq->axq_link == NULL) { 3667 ath_hal_puttxbuf(ah, txq->axq_qnum, bf->bf_daddr); 3668 DPRINTF(sc, ATH_DEBUG_XMIT, 3669 "%s: TXDP[%u] = %p (%p) depth %d\n", __func__, 3670 txq->axq_qnum, (caddr_t)bf->bf_daddr, bf->bf_desc, 3671 txq->axq_depth); 3672 } else { 3673 *txq->axq_link = bf->bf_daddr; 3674 DPRINTF(sc, ATH_DEBUG_XMIT, 3675 "%s: link[%u](%p)=%p (%p) depth %d\n", __func__, 3676 txq->axq_qnum, txq->axq_link, 3677 (caddr_t)bf->bf_daddr, bf->bf_desc, txq->axq_depth); 3678 } 3679 txq->axq_link = &bf->bf_desc[bf->bf_nseg - 1].ds_link; 3680 /* 3681 * The CAB queue is started from the SWBA handler since 3682 * frames only go out on DTIM and to avoid possible races. 3683 */ 3684 if (txq != sc->sc_cabq) 3685 ath_hal_txstart(ah, txq->axq_qnum); 3686 ATH_TXQ_UNLOCK(txq); 3687 3688 return 0; 3689} 3690 3691/* 3692 * Process completed xmit descriptors from the specified queue. 3693 */
|
3669static void
|
3694static int |
3695ath_tx_processq(struct ath_softc *sc, struct ath_txq *txq) 3696{ 3697 struct ath_hal *ah = sc->sc_ah; 3698 struct ieee80211com *ic = &sc->sc_ic; 3699 struct ath_buf *bf; 3700 struct ath_desc *ds, *ds0; 3701 struct ieee80211_node *ni; 3702 struct ath_node *an;
|
3678 int sr, lr, pri;
|
3703 int sr, lr, pri, nacked; |
3704 HAL_STATUS status; 3705 3706 DPRINTF(sc, ATH_DEBUG_TX_PROC, "%s: tx queue %u head %p link %p\n", 3707 __func__, txq->axq_qnum, 3708 (caddr_t)(uintptr_t) ath_hal_gettxbuf(sc->sc_ah, txq->axq_qnum), 3709 txq->axq_link);
|
3710 nacked = 0; |
3711 for (;;) { 3712 ATH_TXQ_LOCK(txq); 3713 txq->axq_intrcnt = 0; /* reset periodic desc intr count */ 3714 bf = STAILQ_FIRST(&txq->axq_q); 3715 if (bf == NULL) { 3716 txq->axq_link = NULL; 3717 ATH_TXQ_UNLOCK(txq); 3718 break; 3719 } 3720 ds0 = &bf->bf_desc[0]; 3721 ds = &bf->bf_desc[bf->bf_nseg - 1]; 3722 status = ath_hal_txprocdesc(ah, ds); 3723#ifdef AR_DEBUG 3724 if (sc->sc_debug & ATH_DEBUG_XMIT_DESC) 3725 ath_printtxbuf(bf, status == HAL_OK); 3726#endif 3727 if (status == HAL_EINPROGRESS) { 3728 ATH_TXQ_UNLOCK(txq); 3729 break; 3730 } 3731 ATH_TXQ_REMOVE_HEAD(txq, bf_list); 3732 ATH_TXQ_UNLOCK(txq); 3733 3734 ni = bf->bf_node; 3735 if (ni != NULL) { 3736 an = ATH_NODE(ni); 3737 if (ds->ds_txstat.ts_status == 0) { 3738 u_int8_t txant = ds->ds_txstat.ts_antenna; 3739 sc->sc_stats.ast_ant_tx[txant]++; 3740 sc->sc_ant_tx[txant]++; 3741 if (ds->ds_txstat.ts_rate & HAL_TXSTAT_ALTRATE) 3742 sc->sc_stats.ast_tx_altrate++; 3743 sc->sc_stats.ast_tx_rssi = 3744 ds->ds_txstat.ts_rssi; 3745 ATH_RSSI_LPF(sc->sc_halstats.ns_avgtxrssi, 3746 ds->ds_txstat.ts_rssi); 3747 pri = M_WME_GETAC(bf->bf_m); 3748 if (pri >= WME_AC_VO) 3749 ic->ic_wme.wme_hipri_traffic++; 3750 ni->ni_inact = ni->ni_inact_reload; 3751 } else { 3752 if (ds->ds_txstat.ts_status & HAL_TXERR_XRETRY) 3753 sc->sc_stats.ast_tx_xretries++; 3754 if (ds->ds_txstat.ts_status & HAL_TXERR_FIFO) 3755 sc->sc_stats.ast_tx_fifoerr++; 3756 if (ds->ds_txstat.ts_status & HAL_TXERR_FILT) 3757 sc->sc_stats.ast_tx_filtered++; 3758 } 3759 sr = ds->ds_txstat.ts_shortretry; 3760 lr = ds->ds_txstat.ts_longretry; 3761 sc->sc_stats.ast_tx_shortretry += sr; 3762 sc->sc_stats.ast_tx_longretry += lr; 3763 /* 3764 * Hand the descriptor to the rate control algorithm. 3765 */ 3766 if ((ds->ds_txstat.ts_status & HAL_TXERR_FILT) == 0 &&
|
3741 (bf->bf_flags & HAL_TXDESC_NOACK) == 0)
|
3767 (bf->bf_flags & HAL_TXDESC_NOACK) == 0) { 3768 /* 3769 * If frame was ack'd update the last rx time 3770 * used to workaround phantom bmiss interrupts. 3771 */ 3772 if (ds->ds_txstat.ts_status == 0) 3773 nacked++; |
3774 ath_rate_tx_complete(sc, an, ds, ds0);
|
3775 } |
3776 /* 3777 * Reclaim reference to node. 3778 * 3779 * NB: the node may be reclaimed here if, for example 3780 * this is a DEAUTH message that was sent and the 3781 * node was timed out due to inactivity. 3782 */ 3783 ieee80211_free_node(ni); 3784 } 3785 bus_dmamap_sync(sc->sc_dmat, bf->bf_dmamap, 3786 BUS_DMASYNC_POSTWRITE); 3787 bus_dmamap_unload(sc->sc_dmat, bf->bf_dmamap); 3788 m_freem(bf->bf_m); 3789 bf->bf_m = NULL; 3790 bf->bf_node = NULL; 3791 3792 ATH_TXBUF_LOCK(sc); 3793 STAILQ_INSERT_TAIL(&sc->sc_txbuf, bf, bf_list); 3794 ATH_TXBUF_UNLOCK(sc); 3795 }
|
3796 return nacked; |
3797} 3798
|
3799static __inline int 3800txqactive(struct ath_hal *ah, int qnum) 3801{ 3802 /* XXX not yet */ 3803 return 1; 3804} 3805 |
3806/* 3807 * Deferred processing of transmit interrupt; special-cased 3808 * for a single hardware transmit queue (e.g. 5210 and 5211). 3809 */ 3810static void 3811ath_tx_proc_q0(void *arg, int npending) 3812{ 3813 struct ath_softc *sc = arg; 3814 struct ifnet *ifp = sc->sc_ifp; 3815
|
3775 ath_tx_processq(sc, &sc->sc_txq[0]);
|
3816 if (txqactive(sc->sc_ah, 0) && ath_tx_processq(sc, &sc->sc_txq[0])) 3817 sc->sc_lastrx = ath_hal_gettsf64(sc->sc_ah); 3818 if (txqactive(sc->sc_ah, sc->sc_cabq->axq_qnum)) 3819 ath_tx_processq(sc, sc->sc_cabq); |
3820 ath_tx_processq(sc, sc->sc_cabq); 3821 ifp->if_drv_flags &= ~IFF_DRV_OACTIVE; 3822 sc->sc_tx_timer = 0; 3823 3824 if (sc->sc_softled) 3825 ath_led_event(sc, ATH_LED_TX); 3826 3827 ath_start(ifp); 3828} 3829 3830/* 3831 * Deferred processing of transmit interrupt; special-cased 3832 * for four hardware queues, 0-3 (e.g. 5212 w/ WME support). 3833 */ 3834static void 3835ath_tx_proc_q0123(void *arg, int npending) 3836{ 3837 struct ath_softc *sc = arg; 3838 struct ifnet *ifp = sc->sc_ifp;
|
3839 int nacked; |
3840 3841 /* 3842 * Process each active queue. 3843 */
|
3799 ath_tx_processq(sc, &sc->sc_txq[0]);
3800 ath_tx_processq(sc, &sc->sc_txq[1]);
3801 ath_tx_processq(sc, &sc->sc_txq[2]);
3802 ath_tx_processq(sc, &sc->sc_txq[3]);
3803 ath_tx_processq(sc, sc->sc_cabq);
|
3844 nacked = 0; 3845 if (txqactive(sc->sc_ah, 0)) 3846 nacked += ath_tx_processq(sc, &sc->sc_txq[0]); 3847 if (txqactive(sc->sc_ah, 1)) 3848 nacked += ath_tx_processq(sc, &sc->sc_txq[1]); 3849 if (txqactive(sc->sc_ah, 2)) 3850 nacked += ath_tx_processq(sc, &sc->sc_txq[2]); 3851 if (txqactive(sc->sc_ah, 3)) 3852 nacked += ath_tx_processq(sc, &sc->sc_txq[3]); 3853 if (txqactive(sc->sc_ah, sc->sc_cabq->axq_qnum)) 3854 ath_tx_processq(sc, sc->sc_cabq); 3855 if (nacked) 3856 sc->sc_lastrx = ath_hal_gettsf64(sc->sc_ah); |
3857 3858 ifp->if_drv_flags &= ~IFF_DRV_OACTIVE; 3859 sc->sc_tx_timer = 0; 3860 3861 if (sc->sc_softled) 3862 ath_led_event(sc, ATH_LED_TX); 3863 3864 ath_start(ifp); 3865} 3866 3867/* 3868 * Deferred processing of transmit interrupt. 3869 */ 3870static void 3871ath_tx_proc(void *arg, int npending) 3872{ 3873 struct ath_softc *sc = arg; 3874 struct ifnet *ifp = sc->sc_ifp;
|
3822 int i;
|
3875 int i, nacked; |
3876 3877 /* 3878 * Process each active queue. 3879 */
|
3827 /* XXX faster to read ISR_S0_S and ISR_S1_S to determine q's? */
|
3880 nacked = 0; |
3881 for (i = 0; i < HAL_NUM_TX_QUEUES; i++)
|
3829 if (ATH_TXQ_SETUP(sc, i))
3830 ath_tx_processq(sc, &sc->sc_txq[i]);
|
3882 if (ATH_TXQ_SETUP(sc, i) && txqactive(sc->sc_ah, i)) 3883 nacked += ath_tx_processq(sc, &sc->sc_txq[i]); 3884 if (nacked) 3885 sc->sc_lastrx = ath_hal_gettsf64(sc->sc_ah); |
3886 3887 ifp->if_drv_flags &= ~IFF_DRV_OACTIVE; 3888 sc->sc_tx_timer = 0; 3889 3890 if (sc->sc_softled) 3891 ath_led_event(sc, ATH_LED_TX); 3892 3893 ath_start(ifp); 3894} 3895 3896static void 3897ath_tx_draintxq(struct ath_softc *sc, struct ath_txq *txq) 3898{ 3899 struct ath_hal *ah = sc->sc_ah; 3900 struct ieee80211_node *ni; 3901 struct ath_buf *bf; 3902 3903 /* 3904 * NB: this assumes output has been stopped and 3905 * we do not need to block ath_tx_tasklet 3906 */ 3907 for (;;) { 3908 ATH_TXQ_LOCK(txq); 3909 bf = STAILQ_FIRST(&txq->axq_q); 3910 if (bf == NULL) { 3911 txq->axq_link = NULL; 3912 ATH_TXQ_UNLOCK(txq); 3913 break; 3914 } 3915 ATH_TXQ_REMOVE_HEAD(txq, bf_list); 3916 ATH_TXQ_UNLOCK(txq); 3917#ifdef AR_DEBUG 3918 if (sc->sc_debug & ATH_DEBUG_RESET) 3919 ath_printtxbuf(bf, 3920 ath_hal_txprocdesc(ah, bf->bf_desc) == HAL_OK); 3921#endif /* AR_DEBUG */ 3922 bus_dmamap_unload(sc->sc_dmat, bf->bf_dmamap); 3923 m_freem(bf->bf_m); 3924 bf->bf_m = NULL; 3925 ni = bf->bf_node; 3926 bf->bf_node = NULL; 3927 if (ni != NULL) { 3928 /* 3929 * Reclaim node reference. 3930 */ 3931 ieee80211_free_node(ni); 3932 } 3933 ATH_TXBUF_LOCK(sc); 3934 STAILQ_INSERT_TAIL(&sc->sc_txbuf, bf, bf_list); 3935 ATH_TXBUF_UNLOCK(sc); 3936 } 3937} 3938 3939static void 3940ath_tx_stopdma(struct ath_softc *sc, struct ath_txq *txq) 3941{ 3942 struct ath_hal *ah = sc->sc_ah; 3943 3944 (void) ath_hal_stoptxdma(ah, txq->axq_qnum); 3945 DPRINTF(sc, ATH_DEBUG_RESET, "%s: tx queue [%u] %p, link %p\n", 3946 __func__, txq->axq_qnum, 3947 (caddr_t)(uintptr_t) ath_hal_gettxbuf(ah, txq->axq_qnum), 3948 txq->axq_link); 3949} 3950 3951/* 3952 * Drain the transmit queues and reclaim resources. 3953 */ 3954static void 3955ath_draintxq(struct ath_softc *sc) 3956{ 3957 struct ath_hal *ah = sc->sc_ah; 3958 struct ifnet *ifp = sc->sc_ifp; 3959 int i; 3960 3961 /* XXX return value */ 3962 if (!sc->sc_invalid) { 3963 /* don't touch the hardware if marked invalid */ 3964 (void) ath_hal_stoptxdma(ah, sc->sc_bhalq); 3965 DPRINTF(sc, ATH_DEBUG_RESET, 3966 "%s: beacon queue %p\n", __func__, 3967 (caddr_t)(uintptr_t) ath_hal_gettxbuf(ah, sc->sc_bhalq)); 3968 for (i = 0; i < HAL_NUM_TX_QUEUES; i++) 3969 if (ATH_TXQ_SETUP(sc, i)) 3970 ath_tx_stopdma(sc, &sc->sc_txq[i]); 3971 } 3972 for (i = 0; i < HAL_NUM_TX_QUEUES; i++) 3973 if (ATH_TXQ_SETUP(sc, i)) 3974 ath_tx_draintxq(sc, &sc->sc_txq[i]); 3975 ifp->if_drv_flags &= ~IFF_DRV_OACTIVE; 3976 sc->sc_tx_timer = 0; 3977} 3978 3979/* 3980 * Disable the receive h/w in preparation for a reset. 3981 */ 3982static void 3983ath_stoprecv(struct ath_softc *sc) 3984{ 3985#define PA2DESC(_sc, _pa) \ 3986 ((struct ath_desc *)((caddr_t)(_sc)->sc_rxdma.dd_desc + \ 3987 ((_pa) - (_sc)->sc_rxdma.dd_desc_paddr))) 3988 struct ath_hal *ah = sc->sc_ah; 3989 3990 ath_hal_stoppcurecv(ah); /* disable PCU */ 3991 ath_hal_setrxfilter(ah, 0); /* clear recv filter */ 3992 ath_hal_stopdmarecv(ah); /* disable DMA engine */ 3993 DELAY(3000); /* 3ms is long enough for 1 frame */ 3994#ifdef AR_DEBUG 3995 if (sc->sc_debug & (ATH_DEBUG_RESET | ATH_DEBUG_FATAL)) { 3996 struct ath_buf *bf; 3997 3998 printf("%s: rx queue %p, link %p\n", __func__, 3999 (caddr_t)(uintptr_t) ath_hal_getrxbuf(ah), sc->sc_rxlink); 4000 STAILQ_FOREACH(bf, &sc->sc_rxbuf, bf_list) { 4001 struct ath_desc *ds = bf->bf_desc; 4002 HAL_STATUS status = ath_hal_rxprocdesc(ah, ds, 4003 bf->bf_daddr, PA2DESC(sc, ds->ds_link)); 4004 if (status == HAL_OK || (sc->sc_debug & ATH_DEBUG_FATAL)) 4005 ath_printrxbuf(bf, status == HAL_OK); 4006 } 4007 } 4008#endif 4009 sc->sc_rxlink = NULL; /* just in case */ 4010#undef PA2DESC 4011} 4012 4013/* 4014 * Enable the receive h/w following a reset. 4015 */ 4016static int 4017ath_startrecv(struct ath_softc *sc) 4018{ 4019 struct ath_hal *ah = sc->sc_ah; 4020 struct ath_buf *bf; 4021 4022 sc->sc_rxlink = NULL; 4023 STAILQ_FOREACH(bf, &sc->sc_rxbuf, bf_list) { 4024 int error = ath_rxbuf_init(sc, bf); 4025 if (error != 0) { 4026 DPRINTF(sc, ATH_DEBUG_RECV, 4027 "%s: ath_rxbuf_init failed %d\n", 4028 __func__, error); 4029 return error; 4030 } 4031 } 4032 4033 bf = STAILQ_FIRST(&sc->sc_rxbuf); 4034 ath_hal_putrxbuf(ah, bf->bf_daddr); 4035 ath_hal_rxena(ah); /* enable recv descriptors */ 4036 ath_mode_init(sc); /* set filters, etc. */ 4037 ath_hal_startpcurecv(ah); /* re-enable PCU/DMA engine */ 4038 return 0; 4039} 4040 4041/* 4042 * Update internal state after a channel change. 4043 */ 4044static void 4045ath_chan_change(struct ath_softc *sc, struct ieee80211_channel *chan) 4046{ 4047 struct ieee80211com *ic = &sc->sc_ic; 4048 enum ieee80211_phymode mode; 4049 u_int16_t flags; 4050 4051 /* 4052 * Change channels and update the h/w rate map 4053 * if we're switching; e.g. 11a to 11b/g. 4054 */ 4055 mode = ieee80211_chan2mode(ic, chan); 4056 if (mode != sc->sc_curmode) 4057 ath_setcurmode(sc, mode); 4058 /* 4059 * Update BPF state. NB: ethereal et. al. don't handle 4060 * merged flags well so pick a unique mode for their use. 4061 */ 4062 if (IEEE80211_IS_CHAN_A(chan)) 4063 flags = IEEE80211_CHAN_A; 4064 /* XXX 11g schizophrenia */ 4065 else if (IEEE80211_IS_CHAN_G(chan) || 4066 IEEE80211_IS_CHAN_PUREG(chan)) 4067 flags = IEEE80211_CHAN_G; 4068 else 4069 flags = IEEE80211_CHAN_B; 4070 if (IEEE80211_IS_CHAN_T(chan)) 4071 flags |= IEEE80211_CHAN_TURBO; 4072 sc->sc_tx_th.wt_chan_freq = sc->sc_rx_th.wr_chan_freq = 4073 htole16(chan->ic_freq); 4074 sc->sc_tx_th.wt_chan_flags = sc->sc_rx_th.wr_chan_flags = 4075 htole16(flags); 4076} 4077 4078/* 4079 * Set/change channels. If the channel is really being changed, 4080 * it's done by reseting the chip. To accomplish this we must 4081 * first cleanup any pending DMA, then restart stuff after a la 4082 * ath_init. 4083 */ 4084static int 4085ath_chan_set(struct ath_softc *sc, struct ieee80211_channel *chan) 4086{ 4087 struct ath_hal *ah = sc->sc_ah; 4088 struct ieee80211com *ic = &sc->sc_ic; 4089 HAL_CHANNEL hchan; 4090 4091 /* 4092 * Convert to a HAL channel description with 4093 * the flags constrained to reflect the current 4094 * operating mode. 4095 */ 4096 hchan.channel = chan->ic_freq; 4097 hchan.channelFlags = ath_chan2flags(ic, chan); 4098 4099 DPRINTF(sc, ATH_DEBUG_RESET, "%s: %u (%u MHz) -> %u (%u MHz)\n", 4100 __func__, 4101 ath_hal_mhz2ieee(sc->sc_curchan.channel, 4102 sc->sc_curchan.channelFlags), 4103 sc->sc_curchan.channel, 4104 ath_hal_mhz2ieee(hchan.channel, hchan.channelFlags), hchan.channel); 4105 if (hchan.channel != sc->sc_curchan.channel || 4106 hchan.channelFlags != sc->sc_curchan.channelFlags) { 4107 HAL_STATUS status; 4108 4109 /* 4110 * To switch channels clear any pending DMA operations; 4111 * wait long enough for the RX fifo to drain, reset the 4112 * hardware at the new frequency, and then re-enable 4113 * the relevant bits of the h/w. 4114 */ 4115 ath_hal_intrset(ah, 0); /* disable interrupts */ 4116 ath_draintxq(sc); /* clear pending tx frames */ 4117 ath_stoprecv(sc); /* turn off frame recv */ 4118 if (!ath_hal_reset(ah, sc->sc_opmode, &hchan, AH_TRUE, &status)) { 4119 if_printf(ic->ic_ifp, "ath_chan_set: unable to reset " 4120 "channel %u (%u Mhz)\n", 4121 ieee80211_chan2ieee(ic, chan), chan->ic_freq); 4122 return EIO; 4123 } 4124 sc->sc_curchan = hchan; 4125 ath_update_txpow(sc); /* update tx power state */ 4126 sc->sc_diversity = ath_hal_getdiversity(ah); 4127 4128 /* 4129 * Re-enable rx framework. 4130 */ 4131 if (ath_startrecv(sc) != 0) { 4132 if_printf(ic->ic_ifp, 4133 "ath_chan_set: unable to restart recv logic\n"); 4134 return EIO; 4135 } 4136 4137 /* 4138 * Change channels and update the h/w rate map 4139 * if we're switching; e.g. 11a to 11b/g. 4140 */ 4141 ic->ic_ibss_chan = chan; 4142 ath_chan_change(sc, chan); 4143 4144 /* 4145 * Re-enable interrupts. 4146 */ 4147 ath_hal_intrset(ah, sc->sc_imask); 4148 } 4149 return 0; 4150} 4151 4152static void 4153ath_next_scan(void *arg) 4154{ 4155 struct ath_softc *sc = arg; 4156 struct ieee80211com *ic = &sc->sc_ic; 4157 4158 if (ic->ic_state == IEEE80211_S_SCAN) 4159 ieee80211_next_scan(ic); 4160} 4161 4162/* 4163 * Periodically recalibrate the PHY to account 4164 * for temperature/environment changes. 4165 */ 4166static void 4167ath_calibrate(void *arg) 4168{ 4169 struct ath_softc *sc = arg; 4170 struct ath_hal *ah = sc->sc_ah; 4171 4172 sc->sc_stats.ast_per_cal++; 4173 4174 DPRINTF(sc, ATH_DEBUG_CALIBRATE, "%s: channel %u/%x\n", 4175 __func__, sc->sc_curchan.channel, sc->sc_curchan.channelFlags); 4176 4177 if (ath_hal_getrfgain(ah) == HAL_RFGAIN_NEED_CHANGE) { 4178 /* 4179 * Rfgain is out of bounds, reset the chip 4180 * to load new gain values. 4181 */ 4182 sc->sc_stats.ast_per_rfgain++; 4183 ath_reset(sc->sc_ifp); 4184 } 4185 if (!ath_hal_calibrate(ah, &sc->sc_curchan)) { 4186 DPRINTF(sc, ATH_DEBUG_ANY, 4187 "%s: calibration of channel %u failed\n", 4188 __func__, sc->sc_curchan.channel); 4189 sc->sc_stats.ast_per_calfail++; 4190 } 4191 /* 4192 * Calibrate noise floor data again in case of change. 4193 */ 4194 ath_hal_process_noisefloor(ah); 4195 callout_reset(&sc->sc_cal_ch, ath_calinterval * hz, ath_calibrate, sc); 4196} 4197 4198static int 4199ath_newstate(struct ieee80211com *ic, enum ieee80211_state nstate, int arg) 4200{ 4201 struct ifnet *ifp = ic->ic_ifp; 4202 struct ath_softc *sc = ifp->if_softc; 4203 struct ath_hal *ah = sc->sc_ah; 4204 struct ieee80211_node *ni; 4205 int i, error; 4206 const u_int8_t *bssid; 4207 u_int32_t rfilt; 4208 static const HAL_LED_STATE leds[] = { 4209 HAL_LED_INIT, /* IEEE80211_S_INIT */ 4210 HAL_LED_SCAN, /* IEEE80211_S_SCAN */ 4211 HAL_LED_AUTH, /* IEEE80211_S_AUTH */ 4212 HAL_LED_ASSOC, /* IEEE80211_S_ASSOC */ 4213 HAL_LED_RUN, /* IEEE80211_S_RUN */ 4214 }; 4215 4216 DPRINTF(sc, ATH_DEBUG_STATE, "%s: %s -> %s\n", __func__, 4217 ieee80211_state_name[ic->ic_state], 4218 ieee80211_state_name[nstate]); 4219 4220 callout_stop(&sc->sc_scan_ch); 4221 callout_stop(&sc->sc_cal_ch); 4222 ath_hal_setledstate(ah, leds[nstate]); /* set LED */ 4223 4224 if (nstate == IEEE80211_S_INIT) { 4225 sc->sc_imask &= ~(HAL_INT_SWBA | HAL_INT_BMISS); 4226 /* 4227 * NB: disable interrupts so we don't rx frames. 4228 */ 4229 ath_hal_intrset(ah, sc->sc_imask &~ HAL_INT_GLOBAL); 4230 /* 4231 * Notify the rate control algorithm. 4232 */ 4233 ath_rate_newstate(sc, nstate); 4234 goto done; 4235 } 4236 ni = ic->ic_bss; 4237 error = ath_chan_set(sc, ic->ic_curchan); 4238 if (error != 0) 4239 goto bad; 4240 rfilt = ath_calcrxfilter(sc, nstate); 4241 if (nstate == IEEE80211_S_SCAN) 4242 bssid = ifp->if_broadcastaddr; 4243 else 4244 bssid = ni->ni_bssid; 4245 ath_hal_setrxfilter(ah, rfilt); 4246 DPRINTF(sc, ATH_DEBUG_STATE, "%s: RX filter 0x%x bssid %s\n", 4247 __func__, rfilt, ether_sprintf(bssid)); 4248 4249 if (nstate == IEEE80211_S_RUN && ic->ic_opmode == IEEE80211_M_STA) 4250 ath_hal_setassocid(ah, bssid, ni->ni_associd); 4251 else 4252 ath_hal_setassocid(ah, bssid, 0); 4253 if (ic->ic_flags & IEEE80211_F_PRIVACY) { 4254 for (i = 0; i < IEEE80211_WEP_NKID; i++) 4255 if (ath_hal_keyisvalid(ah, i)) 4256 ath_hal_keysetmac(ah, i, bssid); 4257 } 4258 4259 /* 4260 * Notify the rate control algorithm so rates 4261 * are setup should ath_beacon_alloc be called. 4262 */ 4263 ath_rate_newstate(sc, nstate); 4264 4265 if (ic->ic_opmode == IEEE80211_M_MONITOR) { 4266 /* nothing to do */; 4267 } else if (nstate == IEEE80211_S_RUN) { 4268 DPRINTF(sc, ATH_DEBUG_STATE, 4269 "%s(RUN): ic_flags=0x%08x iv=%d bssid=%s " 4270 "capinfo=0x%04x chan=%d\n" 4271 , __func__ 4272 , ic->ic_flags 4273 , ni->ni_intval 4274 , ether_sprintf(ni->ni_bssid) 4275 , ni->ni_capinfo 4276 , ieee80211_chan2ieee(ic, ic->ic_curchan)); 4277 4278 switch (ic->ic_opmode) { 4279 case IEEE80211_M_HOSTAP: 4280 case IEEE80211_M_IBSS: 4281 /* 4282 * Allocate and setup the beacon frame. 4283 * 4284 * Stop any previous beacon DMA. This may be 4285 * necessary, for example, when an ibss merge 4286 * causes reconfiguration; there will be a state 4287 * transition from RUN->RUN that means we may 4288 * be called with beacon transmission active. 4289 */ 4290 ath_hal_stoptxdma(ah, sc->sc_bhalq); 4291 ath_beacon_free(sc); 4292 error = ath_beacon_alloc(sc, ni); 4293 if (error != 0) 4294 goto bad; 4295 /* 4296 * Configure the beacon and sleep timers. 4297 */ 4298 ath_beacon_config(sc); 4299 break; 4300 case IEEE80211_M_STA: 4301 /* 4302 * Allocate a key cache slot to the station. 4303 */ 4304 if ((ic->ic_flags & IEEE80211_F_PRIVACY) == 0 && 4305 sc->sc_hasclrkey && 4306 ni->ni_ucastkey.wk_keyix == IEEE80211_KEYIX_NONE) 4307 ath_setup_stationkey(ni); 4308 /* 4309 * Configure the beacon and sleep timers. 4310 */ 4311 ath_beacon_config(sc); 4312 break; 4313 default: 4314 break; 4315 } 4316 4317 /* 4318 * Let the hal process statistics collected during a 4319 * scan so it can provide calibrated noise floor data. 4320 */ 4321 ath_hal_process_noisefloor(ah); 4322 /* 4323 * Reset rssi stats; maybe not the best place... 4324 */ 4325 sc->sc_halstats.ns_avgbrssi = ATH_RSSI_DUMMY_MARKER; 4326 sc->sc_halstats.ns_avgrssi = ATH_RSSI_DUMMY_MARKER; 4327 sc->sc_halstats.ns_avgtxrssi = ATH_RSSI_DUMMY_MARKER; 4328 } else { 4329 ath_hal_intrset(ah, 4330 sc->sc_imask &~ (HAL_INT_SWBA | HAL_INT_BMISS)); 4331 sc->sc_imask &= ~(HAL_INT_SWBA | HAL_INT_BMISS); 4332 } 4333done: 4334 /* 4335 * Invoke the parent method to complete the work. 4336 */ 4337 error = sc->sc_newstate(ic, nstate, arg); 4338 /* 4339 * Finally, start any timers. 4340 */ 4341 if (nstate == IEEE80211_S_RUN) { 4342 /* start periodic recalibration timer */ 4343 callout_reset(&sc->sc_cal_ch, ath_calinterval * hz, 4344 ath_calibrate, sc); 4345 } else if (nstate == IEEE80211_S_SCAN) { 4346 /* start ap/neighbor scan timer */ 4347 callout_reset(&sc->sc_scan_ch, (ath_dwelltime * hz) / 1000, 4348 ath_next_scan, sc); 4349 } 4350bad: 4351 return error; 4352} 4353 4354/* 4355 * Allocate a key cache slot to the station so we can 4356 * setup a mapping from key index to node. The key cache 4357 * slot is needed for managing antenna state and for 4358 * compression when stations do not use crypto. We do 4359 * it uniliaterally here; if crypto is employed this slot 4360 * will be reassigned. 4361 */ 4362static void 4363ath_setup_stationkey(struct ieee80211_node *ni) 4364{ 4365 struct ieee80211com *ic = ni->ni_ic; 4366 struct ath_softc *sc = ic->ic_ifp->if_softc; 4367 ieee80211_keyix keyix, rxkeyix; 4368 4369 if (!ath_key_alloc(ic, &ni->ni_ucastkey, &keyix, &rxkeyix)) { 4370 /* 4371 * Key cache is full; we'll fall back to doing 4372 * the more expensive lookup in software. Note 4373 * this also means no h/w compression. 4374 */ 4375 /* XXX msg+statistic */ 4376 } else { 4377 /* XXX locking? */ 4378 ni->ni_ucastkey.wk_keyix = keyix; 4379 ni->ni_ucastkey.wk_rxkeyix = rxkeyix; 4380 /* NB: this will create a pass-thru key entry */ 4381 ath_keyset(sc, &ni->ni_ucastkey, ni->ni_macaddr, ic->ic_bss); 4382 } 4383} 4384 4385/* 4386 * Setup driver-specific state for a newly associated node. 4387 * Note that we're called also on a re-associate, the isnew 4388 * param tells us if this is the first time or not. 4389 */ 4390static void 4391ath_newassoc(struct ieee80211_node *ni, int isnew) 4392{ 4393 struct ieee80211com *ic = ni->ni_ic; 4394 struct ath_softc *sc = ic->ic_ifp->if_softc; 4395 4396 ath_rate_newassoc(sc, ATH_NODE(ni), isnew); 4397 if (isnew && 4398 (ic->ic_flags & IEEE80211_F_PRIVACY) == 0 && sc->sc_hasclrkey) { 4399 KASSERT(ni->ni_ucastkey.wk_keyix == IEEE80211_KEYIX_NONE, 4400 ("new assoc with a unicast key already setup (keyix %u)", 4401 ni->ni_ucastkey.wk_keyix)); 4402 ath_setup_stationkey(ni); 4403 } 4404} 4405 4406static int 4407ath_getchannels(struct ath_softc *sc, u_int cc, 4408 HAL_BOOL outdoor, HAL_BOOL xchanmode) 4409{ 4410 struct ieee80211com *ic = &sc->sc_ic; 4411 struct ifnet *ifp = sc->sc_ifp; 4412 struct ath_hal *ah = sc->sc_ah; 4413 HAL_CHANNEL *chans; 4414 int i, ix, nchan; 4415 4416 chans = malloc(IEEE80211_CHAN_MAX * sizeof(HAL_CHANNEL), 4417 M_TEMP, M_NOWAIT); 4418 if (chans == NULL) { 4419 if_printf(ifp, "unable to allocate channel table\n"); 4420 return ENOMEM; 4421 } 4422 if (!ath_hal_init_channels(ah, chans, IEEE80211_CHAN_MAX, &nchan, 4423 cc, HAL_MODE_ALL, outdoor, xchanmode)) { 4424 u_int32_t rd; 4425 4426 ath_hal_getregdomain(ah, &rd); 4427 if_printf(ifp, "unable to collect channel list from hal; " 4428 "regdomain likely %u country code %u\n", rd, cc); 4429 free(chans, M_TEMP); 4430 return EINVAL; 4431 } 4432 4433 /* 4434 * Convert HAL channels to ieee80211 ones and insert 4435 * them in the table according to their channel number. 4436 */ 4437 for (i = 0; i < nchan; i++) { 4438 HAL_CHANNEL *c = &chans[i]; 4439 ix = ath_hal_mhz2ieee(c->channel, c->channelFlags); 4440 if (ix > IEEE80211_CHAN_MAX) { 4441 if_printf(ifp, "bad hal channel %u (%u/%x) ignored\n", 4442 ix, c->channel, c->channelFlags); 4443 continue; 4444 } 4445 /* NB: flags are known to be compatible */ 4446 if (ic->ic_channels[ix].ic_freq == 0) { 4447 ic->ic_channels[ix].ic_freq = c->channel; 4448 ic->ic_channels[ix].ic_flags = c->channelFlags; 4449 } else { 4450 /* channels overlap; e.g. 11g and 11b */ 4451 ic->ic_channels[ix].ic_flags |= c->channelFlags; 4452 } 4453 } 4454 free(chans, M_TEMP); 4455 return 0; 4456} 4457 4458static void 4459ath_led_done(void *arg) 4460{ 4461 struct ath_softc *sc = arg; 4462 4463 sc->sc_blinking = 0; 4464} 4465 4466/* 4467 * Turn the LED off: flip the pin and then set a timer so no 4468 * update will happen for the specified duration. 4469 */ 4470static void 4471ath_led_off(void *arg) 4472{ 4473 struct ath_softc *sc = arg; 4474 4475 ath_hal_gpioset(sc->sc_ah, sc->sc_ledpin, !sc->sc_ledon); 4476 callout_reset(&sc->sc_ledtimer, sc->sc_ledoff, ath_led_done, sc); 4477} 4478 4479/* 4480 * Blink the LED according to the specified on/off times. 4481 */ 4482static void 4483ath_led_blink(struct ath_softc *sc, int on, int off) 4484{ 4485 DPRINTF(sc, ATH_DEBUG_LED, "%s: on %u off %u\n", __func__, on, off); 4486 ath_hal_gpioset(sc->sc_ah, sc->sc_ledpin, sc->sc_ledon); 4487 sc->sc_blinking = 1; 4488 sc->sc_ledoff = off; 4489 callout_reset(&sc->sc_ledtimer, on, ath_led_off, sc); 4490} 4491 4492static void 4493ath_led_event(struct ath_softc *sc, int event) 4494{ 4495 4496 sc->sc_ledevent = ticks; /* time of last event */ 4497 if (sc->sc_blinking) /* don't interrupt active blink */ 4498 return; 4499 switch (event) { 4500 case ATH_LED_POLL: 4501 ath_led_blink(sc, sc->sc_hwmap[0].ledon, 4502 sc->sc_hwmap[0].ledoff); 4503 break; 4504 case ATH_LED_TX: 4505 ath_led_blink(sc, sc->sc_hwmap[sc->sc_txrate].ledon, 4506 sc->sc_hwmap[sc->sc_txrate].ledoff); 4507 break; 4508 case ATH_LED_RX: 4509 ath_led_blink(sc, sc->sc_hwmap[sc->sc_rxrate].ledon, 4510 sc->sc_hwmap[sc->sc_rxrate].ledoff); 4511 break; 4512 } 4513} 4514 4515static void 4516ath_update_txpow(struct ath_softc *sc) 4517{ 4518 struct ieee80211com *ic = &sc->sc_ic; 4519 struct ath_hal *ah = sc->sc_ah; 4520 u_int32_t txpow; 4521 4522 if (sc->sc_curtxpow != ic->ic_txpowlimit) { 4523 ath_hal_settxpowlimit(ah, ic->ic_txpowlimit); 4524 /* read back in case value is clamped */ 4525 ath_hal_gettxpowlimit(ah, &txpow); 4526 ic->ic_txpowlimit = sc->sc_curtxpow = txpow; 4527 } 4528 /* 4529 * Fetch max tx power level for status requests. 4530 */ 4531 ath_hal_getmaxtxpow(sc->sc_ah, &txpow); 4532 ic->ic_bss->ni_txpower = txpow; 4533} 4534 4535static void 4536rate_setup(struct ath_softc *sc, 4537 const HAL_RATE_TABLE *rt, struct ieee80211_rateset *rs) 4538{ 4539 int i, maxrates; 4540 4541 if (rt->rateCount > IEEE80211_RATE_MAXSIZE) { 4542 DPRINTF(sc, ATH_DEBUG_ANY, 4543 "%s: rate table too small (%u > %u)\n", 4544 __func__, rt->rateCount, IEEE80211_RATE_MAXSIZE); 4545 maxrates = IEEE80211_RATE_MAXSIZE; 4546 } else 4547 maxrates = rt->rateCount; 4548 for (i = 0; i < maxrates; i++) 4549 rs->rs_rates[i] = rt->info[i].dot11Rate; 4550 rs->rs_nrates = maxrates; 4551} 4552 4553static int 4554ath_rate_setup(struct ath_softc *sc, u_int mode) 4555{ 4556 struct ath_hal *ah = sc->sc_ah; 4557 struct ieee80211com *ic = &sc->sc_ic; 4558 const HAL_RATE_TABLE *rt; 4559 4560 switch (mode) { 4561 case IEEE80211_MODE_11A: 4562 rt = ath_hal_getratetable(ah, HAL_MODE_11A); 4563 break; 4564 case IEEE80211_MODE_11B: 4565 rt = ath_hal_getratetable(ah, HAL_MODE_11B); 4566 break; 4567 case IEEE80211_MODE_11G: 4568 rt = ath_hal_getratetable(ah, HAL_MODE_11G); 4569 break; 4570 case IEEE80211_MODE_TURBO_A: 4571 /* XXX until static/dynamic turbo is fixed */ 4572 rt = ath_hal_getratetable(ah, HAL_MODE_TURBO); 4573 break; 4574 case IEEE80211_MODE_TURBO_G: 4575 rt = ath_hal_getratetable(ah, HAL_MODE_108G); 4576 break; 4577 default: 4578 DPRINTF(sc, ATH_DEBUG_ANY, "%s: invalid mode %u\n", 4579 __func__, mode); 4580 return 0; 4581 } 4582 sc->sc_rates[mode] = rt; 4583 if (rt != NULL) { 4584 rate_setup(sc, rt, &ic->ic_sup_rates[mode]); 4585 return 1; 4586 } else 4587 return 0; 4588} 4589 4590static void 4591ath_setcurmode(struct ath_softc *sc, enum ieee80211_phymode mode) 4592{ 4593#define N(a) (sizeof(a)/sizeof(a[0])) 4594 /* NB: on/off times from the Atheros NDIS driver, w/ permission */ 4595 static const struct { 4596 u_int rate; /* tx/rx 802.11 rate */ 4597 u_int16_t timeOn; /* LED on time (ms) */ 4598 u_int16_t timeOff; /* LED off time (ms) */ 4599 } blinkrates[] = { 4600 { 108, 40, 10 }, 4601 { 96, 44, 11 }, 4602 { 72, 50, 13 }, 4603 { 48, 57, 14 }, 4604 { 36, 67, 16 }, 4605 { 24, 80, 20 }, 4606 { 22, 100, 25 }, 4607 { 18, 133, 34 }, 4608 { 12, 160, 40 }, 4609 { 10, 200, 50 }, 4610 { 6, 240, 58 }, 4611 { 4, 267, 66 }, 4612 { 2, 400, 100 }, 4613 { 0, 500, 130 }, 4614 }; 4615 const HAL_RATE_TABLE *rt; 4616 int i, j; 4617 4618 memset(sc->sc_rixmap, 0xff, sizeof(sc->sc_rixmap)); 4619 rt = sc->sc_rates[mode]; 4620 KASSERT(rt != NULL, ("no h/w rate set for phy mode %u", mode)); 4621 for (i = 0; i < rt->rateCount; i++) 4622 sc->sc_rixmap[rt->info[i].dot11Rate & IEEE80211_RATE_VAL] = i; 4623 memset(sc->sc_hwmap, 0, sizeof(sc->sc_hwmap)); 4624 for (i = 0; i < 32; i++) { 4625 u_int8_t ix = rt->rateCodeToIndex[i]; 4626 if (ix == 0xff) { 4627 sc->sc_hwmap[i].ledon = (500 * hz) / 1000; 4628 sc->sc_hwmap[i].ledoff = (130 * hz) / 1000; 4629 continue; 4630 } 4631 sc->sc_hwmap[i].ieeerate = 4632 rt->info[ix].dot11Rate & IEEE80211_RATE_VAL; 4633 sc->sc_hwmap[i].txflags = IEEE80211_RADIOTAP_F_DATAPAD; 4634 if (rt->info[ix].shortPreamble || 4635 rt->info[ix].phy == IEEE80211_T_OFDM) 4636 sc->sc_hwmap[i].txflags |= IEEE80211_RADIOTAP_F_SHORTPRE; 4637 /* NB: receive frames include FCS */ 4638 sc->sc_hwmap[i].rxflags = sc->sc_hwmap[i].txflags | 4639 IEEE80211_RADIOTAP_F_FCS; 4640 /* setup blink rate table to avoid per-packet lookup */ 4641 for (j = 0; j < N(blinkrates)-1; j++) 4642 if (blinkrates[j].rate == sc->sc_hwmap[i].ieeerate) 4643 break; 4644 /* NB: this uses the last entry if the rate isn't found */ 4645 /* XXX beware of overlow */ 4646 sc->sc_hwmap[i].ledon = (blinkrates[j].timeOn * hz) / 1000; 4647 sc->sc_hwmap[i].ledoff = (blinkrates[j].timeOff * hz) / 1000; 4648 } 4649 sc->sc_currates = rt; 4650 sc->sc_curmode = mode; 4651 /* 4652 * All protection frames are transmited at 2Mb/s for 4653 * 11g, otherwise at 1Mb/s. 4654 */ 4655 if (mode == IEEE80211_MODE_11G) 4656 sc->sc_protrix = ath_tx_findrix(rt, 2*2); 4657 else 4658 sc->sc_protrix = ath_tx_findrix(rt, 2*1); 4659 /* rate index used to send management frames */ 4660 sc->sc_minrateix = 0; 4661 /* 4662 * Setup multicast rate state. 4663 */ 4664 /* XXX layering violation */ 4665 sc->sc_mcastrix = ath_tx_findrix(rt, sc->sc_ic.ic_mcast_rate); 4666 sc->sc_mcastrate = sc->sc_ic.ic_mcast_rate; 4667 /* NB: caller is responsible for reseting rate control state */ 4668#undef N 4669} 4670 4671#ifdef AR_DEBUG 4672static void 4673ath_printrxbuf(struct ath_buf *bf, int done) 4674{ 4675 struct ath_desc *ds; 4676 int i; 4677 4678 for (i = 0, ds = bf->bf_desc; i < bf->bf_nseg; i++, ds++) { 4679 printf("R%d (%p %p) %08x %08x %08x %08x %08x %08x %c\n", 4680 i, ds, (struct ath_desc *)bf->bf_daddr + i, 4681 ds->ds_link, ds->ds_data, 4682 ds->ds_ctl0, ds->ds_ctl1, 4683 ds->ds_hw[0], ds->ds_hw[1], 4684 !done ? ' ' : (ds->ds_rxstat.rs_status == 0) ? '*' : '!'); 4685 } 4686} 4687 4688static void 4689ath_printtxbuf(struct ath_buf *bf, int done) 4690{ 4691 struct ath_desc *ds; 4692 int i; 4693 4694 for (i = 0, ds = bf->bf_desc; i < bf->bf_nseg; i++, ds++) { 4695 printf("T%d (%p %p) %08x %08x %08x %08x %08x %08x %08x %08x %c\n", 4696 i, ds, (struct ath_desc *)bf->bf_daddr + i, 4697 ds->ds_link, ds->ds_data, 4698 ds->ds_ctl0, ds->ds_ctl1, 4699 ds->ds_hw[0], ds->ds_hw[1], ds->ds_hw[2], ds->ds_hw[3], 4700 !done ? ' ' : (ds->ds_txstat.ts_status == 0) ? '*' : '!'); 4701 } 4702} 4703#endif /* AR_DEBUG */ 4704 4705static void 4706ath_watchdog(struct ifnet *ifp) 4707{ 4708 struct ath_softc *sc = ifp->if_softc; 4709 struct ieee80211com *ic = &sc->sc_ic; 4710 4711 ifp->if_timer = 0; 4712 if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0 || sc->sc_invalid) 4713 return; 4714 if (sc->sc_tx_timer) { 4715 if (--sc->sc_tx_timer == 0) { 4716 if_printf(ifp, "device timeout\n"); 4717 ath_reset(ifp); 4718 ifp->if_oerrors++; 4719 sc->sc_stats.ast_watchdog++; 4720 } else 4721 ifp->if_timer = 1; 4722 } 4723 ieee80211_watchdog(ic); 4724} 4725 4726/* 4727 * Diagnostic interface to the HAL. This is used by various 4728 * tools to do things like retrieve register contents for 4729 * debugging. The mechanism is intentionally opaque so that 4730 * it can change frequently w/o concern for compatiblity. 4731 */ 4732static int 4733ath_ioctl_diag(struct ath_softc *sc, struct ath_diag *ad) 4734{ 4735 struct ath_hal *ah = sc->sc_ah; 4736 u_int id = ad->ad_id & ATH_DIAG_ID; 4737 void *indata = NULL; 4738 void *outdata = NULL; 4739 u_int32_t insize = ad->ad_in_size; 4740 u_int32_t outsize = ad->ad_out_size; 4741 int error = 0; 4742 4743 if (ad->ad_id & ATH_DIAG_IN) { 4744 /* 4745 * Copy in data. 4746 */ 4747 indata = malloc(insize, M_TEMP, M_NOWAIT); 4748 if (indata == NULL) { 4749 error = ENOMEM; 4750 goto bad; 4751 } 4752 error = copyin(ad->ad_in_data, indata, insize); 4753 if (error) 4754 goto bad; 4755 } 4756 if (ad->ad_id & ATH_DIAG_DYN) { 4757 /* 4758 * Allocate a buffer for the results (otherwise the HAL 4759 * returns a pointer to a buffer where we can read the 4760 * results). Note that we depend on the HAL leaving this 4761 * pointer for us to use below in reclaiming the buffer; 4762 * may want to be more defensive. 4763 */ 4764 outdata = malloc(outsize, M_TEMP, M_NOWAIT); 4765 if (outdata == NULL) { 4766 error = ENOMEM; 4767 goto bad; 4768 } 4769 } 4770 if (ath_hal_getdiagstate(ah, id, indata, insize, &outdata, &outsize)) { 4771 if (outsize < ad->ad_out_size) 4772 ad->ad_out_size = outsize; 4773 if (outdata != NULL) 4774 error = copyout(outdata, ad->ad_out_data, 4775 ad->ad_out_size); 4776 } else { 4777 error = EINVAL; 4778 } 4779bad: 4780 if ((ad->ad_id & ATH_DIAG_IN) && indata != NULL) 4781 free(indata, M_TEMP); 4782 if ((ad->ad_id & ATH_DIAG_DYN) && outdata != NULL) 4783 free(outdata, M_TEMP); 4784 return error; 4785} 4786 4787static int 4788ath_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data) 4789{ 4790#define IS_RUNNING(ifp) \ 4791 ((ifp->if_flags & IFF_UP) && (ifp->if_drv_flags & IFF_DRV_RUNNING)) 4792 struct ath_softc *sc = ifp->if_softc; 4793 struct ieee80211com *ic = &sc->sc_ic; 4794 struct ifreq *ifr = (struct ifreq *)data; 4795 int error = 0; 4796 4797 ATH_LOCK(sc); 4798 switch (cmd) { 4799 case SIOCSIFFLAGS: 4800 if (IS_RUNNING(ifp)) { 4801 /* 4802 * To avoid rescanning another access point, 4803 * do not call ath_init() here. Instead, 4804 * only reflect promisc mode settings. 4805 */ 4806 ath_mode_init(sc); 4807 } else if (ifp->if_flags & IFF_UP) { 4808 /* 4809 * Beware of being called during attach/detach 4810 * to reset promiscuous mode. In that case we 4811 * will still be marked UP but not RUNNING. 4812 * However trying to re-init the interface 4813 * is the wrong thing to do as we've already 4814 * torn down much of our state. There's 4815 * probably a better way to deal with this. 4816 */ 4817 if (!sc->sc_invalid && ic->ic_bss != NULL) 4818 ath_init(sc); /* XXX lose error */ 4819 } else 4820 ath_stop_locked(ifp); 4821 break; 4822 case SIOCADDMULTI: 4823 case SIOCDELMULTI: 4824 /* 4825 * The upper layer has already installed/removed 4826 * the multicast address(es), just recalculate the 4827 * multicast filter for the card. 4828 */ 4829 if (ifp->if_drv_flags & IFF_DRV_RUNNING) 4830 ath_mode_init(sc); 4831 break; 4832 case SIOCGATHSTATS: 4833 /* NB: embed these numbers to get a consistent view */ 4834 sc->sc_stats.ast_tx_packets = ifp->if_opackets; 4835 sc->sc_stats.ast_rx_packets = ifp->if_ipackets; 4836 sc->sc_stats.ast_rx_rssi = ieee80211_getrssi(ic); 4837 ATH_UNLOCK(sc); 4838 /* 4839 * NB: Drop the softc lock in case of a page fault; 4840 * we'll accept any potential inconsisentcy in the 4841 * statistics. The alternative is to copy the data 4842 * to a local structure. 4843 */ 4844 return copyout(&sc->sc_stats, 4845 ifr->ifr_data, sizeof (sc->sc_stats)); 4846 case SIOCGATHDIAG: 4847 error = ath_ioctl_diag(sc, (struct ath_diag *) ifr); 4848 break; 4849 default: 4850 error = ieee80211_ioctl(ic, cmd, data); 4851 if (error == ENETRESET) { 4852 if (IS_RUNNING(ifp) && 4853 ic->ic_roaming != IEEE80211_ROAMING_MANUAL) 4854 ath_init(sc); /* XXX lose error */ 4855 error = 0; 4856 } 4857 if (error == ERESTART) 4858 error = IS_RUNNING(ifp) ? ath_reset(ifp) : 0; 4859 break; 4860 } 4861 ATH_UNLOCK(sc); 4862 return error; 4863#undef IS_RUNNING 4864} 4865 4866static int 4867ath_sysctl_slottime(SYSCTL_HANDLER_ARGS) 4868{ 4869 struct ath_softc *sc = arg1; 4870 u_int slottime = ath_hal_getslottime(sc->sc_ah); 4871 int error; 4872 4873 error = sysctl_handle_int(oidp, &slottime, 0, req); 4874 if (error || !req->newptr) 4875 return error; 4876 return !ath_hal_setslottime(sc->sc_ah, slottime) ? EINVAL : 0; 4877} 4878 4879static int 4880ath_sysctl_acktimeout(SYSCTL_HANDLER_ARGS) 4881{ 4882 struct ath_softc *sc = arg1; 4883 u_int acktimeout = ath_hal_getacktimeout(sc->sc_ah); 4884 int error; 4885 4886 error = sysctl_handle_int(oidp, &acktimeout, 0, req); 4887 if (error || !req->newptr) 4888 return error; 4889 return !ath_hal_setacktimeout(sc->sc_ah, acktimeout) ? EINVAL : 0; 4890} 4891 4892static int 4893ath_sysctl_ctstimeout(SYSCTL_HANDLER_ARGS) 4894{ 4895 struct ath_softc *sc = arg1; 4896 u_int ctstimeout = ath_hal_getctstimeout(sc->sc_ah); 4897 int error; 4898 4899 error = sysctl_handle_int(oidp, &ctstimeout, 0, req); 4900 if (error || !req->newptr) 4901 return error; 4902 return !ath_hal_setctstimeout(sc->sc_ah, ctstimeout) ? EINVAL : 0; 4903} 4904 4905static int 4906ath_sysctl_softled(SYSCTL_HANDLER_ARGS) 4907{ 4908 struct ath_softc *sc = arg1; 4909 int softled = sc->sc_softled; 4910 int error; 4911 4912 error = sysctl_handle_int(oidp, &softled, 0, req); 4913 if (error || !req->newptr) 4914 return error; 4915 softled = (softled != 0); 4916 if (softled != sc->sc_softled) { 4917 if (softled) { 4918 /* NB: handle any sc_ledpin change */ 4919 ath_hal_gpioCfgOutput(sc->sc_ah, sc->sc_ledpin); 4920 ath_hal_gpioset(sc->sc_ah, sc->sc_ledpin, 4921 !sc->sc_ledon); 4922 } 4923 sc->sc_softled = softled; 4924 } 4925 return 0; 4926} 4927 4928static int 4929ath_sysctl_rxantenna(SYSCTL_HANDLER_ARGS) 4930{ 4931 struct ath_softc *sc = arg1; 4932 u_int defantenna = ath_hal_getdefantenna(sc->sc_ah); 4933 int error; 4934 4935 error = sysctl_handle_int(oidp, &defantenna, 0, req); 4936 if (!error && req->newptr) 4937 ath_hal_setdefantenna(sc->sc_ah, defantenna); 4938 return error; 4939} 4940 4941static int 4942ath_sysctl_diversity(SYSCTL_HANDLER_ARGS) 4943{ 4944 struct ath_softc *sc = arg1; 4945 u_int diversity = ath_hal_getdiversity(sc->sc_ah); 4946 int error; 4947 4948 error = sysctl_handle_int(oidp, &diversity, 0, req); 4949 if (error || !req->newptr) 4950 return error; 4951 if (!ath_hal_setdiversity(sc->sc_ah, diversity)) 4952 return EINVAL; 4953 sc->sc_diversity = diversity; 4954 return 0; 4955} 4956 4957static int 4958ath_sysctl_diag(SYSCTL_HANDLER_ARGS) 4959{ 4960 struct ath_softc *sc = arg1; 4961 u_int32_t diag; 4962 int error; 4963 4964 if (!ath_hal_getdiag(sc->sc_ah, &diag)) 4965 return EINVAL; 4966 error = sysctl_handle_int(oidp, &diag, 0, req); 4967 if (error || !req->newptr) 4968 return error; 4969 return !ath_hal_setdiag(sc->sc_ah, diag) ? EINVAL : 0; 4970} 4971 4972static int 4973ath_sysctl_tpscale(SYSCTL_HANDLER_ARGS) 4974{ 4975 struct ath_softc *sc = arg1; 4976 struct ifnet *ifp = sc->sc_ifp; 4977 u_int32_t scale; 4978 int error; 4979 4980 ath_hal_gettpscale(sc->sc_ah, &scale); 4981 error = sysctl_handle_int(oidp, &scale, 0, req); 4982 if (error || !req->newptr) 4983 return error; 4984 return !ath_hal_settpscale(sc->sc_ah, scale) ? EINVAL : ath_reset(ifp); 4985} 4986 4987static int 4988ath_sysctl_tpc(SYSCTL_HANDLER_ARGS) 4989{ 4990 struct ath_softc *sc = arg1; 4991 u_int tpc = ath_hal_gettpc(sc->sc_ah); 4992 int error; 4993 4994 error = sysctl_handle_int(oidp, &tpc, 0, req); 4995 if (error || !req->newptr) 4996 return error; 4997 return !ath_hal_settpc(sc->sc_ah, tpc) ? EINVAL : 0; 4998} 4999 5000static int 5001ath_sysctl_regdomain(SYSCTL_HANDLER_ARGS) 5002{ 5003 struct ath_softc *sc = arg1; 5004 u_int32_t rd; 5005 int error; 5006 5007 if (!ath_hal_getregdomain(sc->sc_ah, &rd)) 5008 return EINVAL; 5009 error = sysctl_handle_int(oidp, &rd, 0, req); 5010 if (error || !req->newptr) 5011 return error; 5012 return !ath_hal_setregdomain(sc->sc_ah, rd) ? EINVAL : 0; 5013} 5014 5015static void 5016ath_sysctlattach(struct ath_softc *sc) 5017{ 5018 struct sysctl_ctx_list *ctx = device_get_sysctl_ctx(sc->sc_dev); 5019 struct sysctl_oid *tree = device_get_sysctl_tree(sc->sc_dev); 5020 struct ath_hal *ah = sc->sc_ah; 5021 5022 ath_hal_getcountrycode(sc->sc_ah, &sc->sc_countrycode); 5023 SYSCTL_ADD_INT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, 5024 "countrycode", CTLFLAG_RD, &sc->sc_countrycode, 0, 5025 "EEPROM country code"); 5026 SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, 5027 "regdomain", CTLTYPE_INT | CTLFLAG_RW, sc, 0, 5028 ath_sysctl_regdomain, "I", "EEPROM regdomain code"); 5029 sc->sc_debug = ath_debug; 5030 SYSCTL_ADD_INT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, 5031 "debug", CTLFLAG_RW, &sc->sc_debug, 0, 5032 "control debugging printfs"); 5033 5034 SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, 5035 "slottime", CTLTYPE_INT | CTLFLAG_RW, sc, 0, 5036 ath_sysctl_slottime, "I", "802.11 slot time (us)"); 5037 SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, 5038 "acktimeout", CTLTYPE_INT | CTLFLAG_RW, sc, 0, 5039 ath_sysctl_acktimeout, "I", "802.11 ACK timeout (us)"); 5040 SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, 5041 "ctstimeout", CTLTYPE_INT | CTLFLAG_RW, sc, 0, 5042 ath_sysctl_ctstimeout, "I", "802.11 CTS timeout (us)"); 5043 SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, 5044 "softled", CTLTYPE_INT | CTLFLAG_RW, sc, 0, 5045 ath_sysctl_softled, "I", "enable/disable software LED support"); 5046 SYSCTL_ADD_INT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, 5047 "ledpin", CTLFLAG_RW, &sc->sc_ledpin, 0, 5048 "GPIO pin connected to LED"); 5049 SYSCTL_ADD_INT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, 5050 "ledon", CTLFLAG_RW, &sc->sc_ledon, 0, 5051 "setting to turn LED on"); 5052 SYSCTL_ADD_INT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, 5053 "ledidle", CTLFLAG_RW, &sc->sc_ledidle, 0, 5054 "idle time for inactivity LED (ticks)"); 5055 SYSCTL_ADD_INT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, 5056 "txantenna", CTLFLAG_RW, &sc->sc_txantenna, 0, 5057 "tx antenna (0=auto)"); 5058 SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, 5059 "rxantenna", CTLTYPE_INT | CTLFLAG_RW, sc, 0, 5060 ath_sysctl_rxantenna, "I", "default/rx antenna"); 5061 if (ath_hal_hasdiversity(ah)) 5062 SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, 5063 "diversity", CTLTYPE_INT | CTLFLAG_RW, sc, 0, 5064 ath_sysctl_diversity, "I", "antenna diversity"); 5065 sc->sc_txintrperiod = ATH_TXINTR_PERIOD; 5066 SYSCTL_ADD_INT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, 5067 "txintrperiod", CTLFLAG_RW, &sc->sc_txintrperiod, 0, 5068 "tx descriptor batching"); 5069 SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, 5070 "diag", CTLTYPE_INT | CTLFLAG_RW, sc, 0, 5071 ath_sysctl_diag, "I", "h/w diagnostic control"); 5072 SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, 5073 "tpscale", CTLTYPE_INT | CTLFLAG_RW, sc, 0, 5074 ath_sysctl_tpscale, "I", "tx power scaling"); 5075 if (ath_hal_hastpc(ah)) 5076 SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, 5077 "tpc", CTLTYPE_INT | CTLFLAG_RW, sc, 0, 5078 ath_sysctl_tpc, "I", "enable/disable per-packet TPC"); 5079 sc->sc_monpass = HAL_RXERR_DECRYPT | HAL_RXERR_MIC; 5080 SYSCTL_ADD_INT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, 5081 "monpass", CTLFLAG_RW, &sc->sc_monpass, 0, 5082 "mask of error frames to pass when monitoring"); 5083} 5084 5085static void 5086ath_bpfattach(struct ath_softc *sc) 5087{ 5088 struct ifnet *ifp = sc->sc_ifp; 5089 5090 bpfattach2(ifp, DLT_IEEE802_11_RADIO, 5091 sizeof(struct ieee80211_frame) + sizeof(sc->sc_tx_th), 5092 &sc->sc_drvbpf); 5093 /* 5094 * Initialize constant fields. 5095 * XXX make header lengths a multiple of 32-bits so subsequent 5096 * headers are properly aligned; this is a kludge to keep 5097 * certain applications happy. 5098 * 5099 * NB: the channel is setup each time we transition to the 5100 * RUN state to avoid filling it in for each frame. 5101 */ 5102 sc->sc_tx_th_len = roundup(sizeof(sc->sc_tx_th), sizeof(u_int32_t)); 5103 sc->sc_tx_th.wt_ihdr.it_len = htole16(sc->sc_tx_th_len); 5104 sc->sc_tx_th.wt_ihdr.it_present = htole32(ATH_TX_RADIOTAP_PRESENT); 5105 5106 sc->sc_rx_th_len = roundup(sizeof(sc->sc_rx_th), sizeof(u_int32_t)); 5107 sc->sc_rx_th.wr_ihdr.it_len = htole16(sc->sc_rx_th_len); 5108 sc->sc_rx_th.wr_ihdr.it_present = htole32(ATH_RX_RADIOTAP_PRESENT); 5109} 5110 5111/* 5112 * Announce various information on device/driver attach. 5113 */ 5114static void 5115ath_announce(struct ath_softc *sc) 5116{ 5117#define HAL_MODE_DUALBAND (HAL_MODE_11A|HAL_MODE_11B) 5118 struct ifnet *ifp = sc->sc_ifp; 5119 struct ath_hal *ah = sc->sc_ah; 5120 u_int modes, cc; 5121 5122 if_printf(ifp, "mac %d.%d phy %d.%d", 5123 ah->ah_macVersion, ah->ah_macRev, 5124 ah->ah_phyRev >> 4, ah->ah_phyRev & 0xf); 5125 /* 5126 * Print radio revision(s). We check the wireless modes 5127 * to avoid falsely printing revs for inoperable parts. 5128 * Dual-band radio revs are returned in the 5Ghz rev number. 5129 */ 5130 ath_hal_getcountrycode(ah, &cc); 5131 modes = ath_hal_getwirelessmodes(ah, cc); 5132 if ((modes & HAL_MODE_DUALBAND) == HAL_MODE_DUALBAND) { 5133 if (ah->ah_analog5GhzRev && ah->ah_analog2GhzRev) 5134 printf(" 5ghz radio %d.%d 2ghz radio %d.%d", 5135 ah->ah_analog5GhzRev >> 4, 5136 ah->ah_analog5GhzRev & 0xf, 5137 ah->ah_analog2GhzRev >> 4, 5138 ah->ah_analog2GhzRev & 0xf); 5139 else 5140 printf(" radio %d.%d", ah->ah_analog5GhzRev >> 4, 5141 ah->ah_analog5GhzRev & 0xf); 5142 } else 5143 printf(" radio %d.%d", ah->ah_analog5GhzRev >> 4, 5144 ah->ah_analog5GhzRev & 0xf); 5145 printf("\n"); 5146 if (bootverbose) { 5147 int i; 5148 for (i = 0; i <= WME_AC_VO; i++) { 5149 struct ath_txq *txq = sc->sc_ac2q[i]; 5150 if_printf(ifp, "Use hw queue %u for %s traffic\n", 5151 txq->axq_qnum, ieee80211_wme_acnames[i]); 5152 } 5153 if_printf(ifp, "Use hw queue %u for CAB traffic\n", 5154 sc->sc_cabq->axq_qnum); 5155 if_printf(ifp, "Use hw queue %u for beacons\n", sc->sc_bhalq); 5156 } 5157 if (ath_rxbuf != ATH_RXBUF) 5158 if_printf(ifp, "using %u rx buffers\n", ath_rxbuf); 5159 if (ath_txbuf != ATH_TXBUF) 5160 if_printf(ifp, "using %u tx buffers\n", ath_txbuf); 5161#undef HAL_MODE_DUALBAND 5162}
|