1/*-
2 * Copyright (c) 1998,1999,2000,2001,2002 S�ren Schmidt <sos@FreeBSD.org>
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 * 1. Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer,
10 * without modification, immediately at the beginning of the file.
11 * 2. Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
14 * 3. The name of the author may not be used to endorse or promote products
15 * derived from this software without specific prior written permission.
16 *
17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
19 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
20 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
21 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
22 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
26 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
27 *
28 * $FreeBSD: head/sys/dev/ata/ata-dma.c 94037 2002-04-07 07:53:34Z sos $
29 */
30
31#include <sys/param.h>
32#include <sys/systm.h>
33#include <sys/ata.h>
34#include <sys/bio.h>
35#include <sys/malloc.h>
36#include <sys/bus.h>
37#include <sys/disk.h>
38#include <sys/devicestat.h>
39#include <pci/pcivar.h>
40#include <machine/bus.h>
41#include <sys/rman.h>
42#include <dev/ata/ata-all.h>
43
44/* prototypes */
45static void ata_dmacreate(struct ata_device *, int, int);
46static void ata_dmasetupd_cb(void *, bus_dma_segment_t *, int, int);
47static void ata_dmasetupc_cb(void *, bus_dma_segment_t *, int, int);
48static void cyrix_timing(struct ata_device *, int, int);
49static void promise_timing(struct ata_device *, int, int);
50static void hpt_timing(struct ata_device *, int, int);
51static int hpt_cable80(struct ata_device *);
52
53/* misc defines */
54#define ATAPI_DEVICE(atadev) \
55 ((atadev->unit == ATA_MASTER && \
56 atadev->channel->devices & ATA_ATAPI_MASTER) || \
57 (atadev->unit == ATA_SLAVE && \
58 atadev->channel->devices & ATA_ATAPI_SLAVE))
59
60#define MAXSEGSZ PAGE_SIZE
61#define MAXTABSZ PAGE_SIZE
62#define MAXCTLDMASZ (2 * (MAXTABSZ + MAXPHYS))
63
64struct ata_dc_cb_args {
65 bus_addr_t maddr;
66 int error;
67};
68
69static void
70ata_dmasetupc_cb(void *xsc, bus_dma_segment_t *segs, int nsegs, int error)
71{
72 struct ata_dc_cb_args *cba = (struct ata_dc_cb_args *)xsc;
73
74 if (!(cba->error = error))
75 cba->maddr = segs[0].ds_addr;
76}
77
78int
79ata_dmaalloc(struct ata_device *atadev)
80{
81 struct ata_channel *ch;
82 struct ata_dc_cb_args ccba;
83 struct ata_dmastate *ds;
84 int error;
85
86 ch = atadev->channel;
87 ds = &atadev->dmastate;
88 if (!ds->cdmatag) {
89 if ((error = bus_dma_tag_create(ch->dmatag, 1, PAGE_SIZE,
90 BUS_SPACE_MAXADDR_32BIT,
91 BUS_SPACE_MAXADDR, NULL, NULL,
92 MAXTABSZ, 1, MAXTABSZ,
93 BUS_DMA_ALLOCNOW, &ds->cdmatag)))
94 return error;
95 }
96 if (!ds->ddmatag) {
97 if ((error = bus_dma_tag_create(ch->dmatag, ch->alignment + 1, 0,
98 BUS_SPACE_MAXADDR_32BIT,
99 BUS_SPACE_MAXADDR, NULL, NULL,
100 MAXPHYS, ATA_DMA_ENTRIES, MAXSEGSZ,
101 BUS_DMA_ALLOCNOW, &ds->ddmatag)))
102 return error;
103 }
104 if (!ds->mdmatab) {
105 if ((error = bus_dmamem_alloc(ds->cdmatag, (void **)&ds->dmatab, 0,
106 &ds->cdmamap)))
107 return error;
108
109 if ((error = bus_dmamap_load(ds->cdmatag, ds->cdmamap, ds->dmatab,
110 MAXTABSZ, ata_dmasetupc_cb, &ccba,
111 0)) != 0 || ccba.error != 0) {
112 bus_dmamem_free(ds->cdmatag, ds->dmatab, ds->cdmamap);
113 return error;
114 }
115 ds->mdmatab = ccba.maddr;
116 }
117 if (!ds->ddmamap) {
118 if ((error = bus_dmamap_create(ds->ddmatag, 0, &ds->ddmamap)) != 0)
119 return error;
120 }
121 return 0;
122}
123
124void
125ata_dmafree(struct ata_device *atadev)
126{
127 struct ata_dmastate *ds;
128
129 ds = &atadev->dmastate;
130 if (ds->mdmatab) {
131 bus_dmamap_unload(ds->cdmatag, ds->cdmamap);
132 bus_dmamem_free(ds->cdmatag, ds->dmatab, ds->cdmamap);
133 ds->mdmatab = 0;
134 ds->cdmamap = NULL;
135 ds->dmatab = NULL;
136 }
137 if (ds->ddmamap) {
138 bus_dmamap_destroy(ds->ddmatag, ds->ddmamap);
139 ds->ddmamap = NULL;
140 }
141 if (ds->cdmatag) {
142 bus_dma_tag_destroy(ds->cdmatag);
143 ds->cdmatag = NULL;
144 }
145 if (ds->ddmatag) {
146 bus_dma_tag_destroy(ds->ddmatag);
147 ds->ddmatag = NULL;
148 }
149}
150
151void
152ata_dmafreetags(struct ata_channel *ch)
153{
154
155 if (ch->dmatag) {
156 bus_dma_tag_destroy(ch->dmatag);
157 ch->dmatag = NULL;
158 }
159}
160
161static void
162ata_dmacreate(struct ata_device *atadev, int apiomode, int mode)
163{
164
165 atadev->mode = mode;
166 if (!atadev->channel->dmatag) {
167 if (bus_dma_tag_create(NULL, 1, 0,
168 BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR,
169 NULL, NULL, MAXCTLDMASZ, ATA_DMA_ENTRIES,
170 BUS_SPACE_MAXSIZE_32BIT, 0,
171 &atadev->channel->dmatag)) {
172 ata_prtdev(atadev, "DMA tag allocation failed, disabling DMA\n");
173 ata_dmainit(atadev, apiomode, -1, -1);
174 }
175 }
176}
177
178void
179ata_dmainit(struct ata_device *atadev, int apiomode, int wdmamode, int udmamode)
180{
181 device_t parent = device_get_parent(atadev->channel->dev);
182 int chiptype = atadev->channel->chiptype;
183 int chiprev = pci_get_revid(parent);
184 int channel = atadev->channel->unit;
185 int device = ATA_DEV(atadev->unit);
186 int devno = (channel << 1) + device;
187 int error;
188
189 /* set our most pessimistic default mode */
190 atadev->mode = ATA_PIO;
191
192 if (!atadev->channel->r_bmio)
193 return;
194
195 /* if simplex controller, only allow DMA on primary channel */
196 if (channel == 1) {
197 ATA_OUTB(atadev->channel->r_bmio, ATA_BMSTAT_PORT,
198 ATA_INB(atadev->channel->r_bmio, ATA_BMSTAT_PORT) &
199 (ATA_BMSTAT_DMA_MASTER | ATA_BMSTAT_DMA_SLAVE));
200 if (ATA_INB(atadev->channel->r_bmio, ATA_BMSTAT_PORT) &
201 ATA_BMSTAT_DMA_SIMPLEX) {
202 ata_prtdev(atadev, "simplex device, DMA on primary only\n");
203 return;
204 }
205 }
206
207 /* DMA engine address alignment is usually 1 word (2 bytes) */
208 atadev->channel->alignment = 0x1;
209
210#if 1
211 if (udmamode > 2 && !atadev->param->hwres_cblid) {
212 ata_prtdev(atadev,"DMA limited to UDMA33, non-ATA66 cable or device\n");
213 udmamode = 2;
214 }
215#endif
216 switch (chiptype) {
217
218 case 0x248a8086: /* Intel ICH3 mobile */
219 case 0x248b8086: /* Intel ICH3 */
220 case 0x244a8086: /* Intel ICH2 mobile */
221 case 0x244b8086: /* Intel ICH2 */
222 if (udmamode >= 5) {
223 int32_t mask48, new48;
224 int16_t word54;
225
226 word54 = pci_read_config(parent, 0x54, 2);
227 if (word54 & (0x10 << devno)) {
228 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
229 ATA_UDMA5, ATA_C_F_SETXFER,ATA_WAIT_READY);
230 if (bootverbose)
231 ata_prtdev(atadev, "%s setting UDMA5 on Intel chip\n",
232 (error) ? "failed" : "success");
233 if (!error) {
234 mask48 = (1 << devno) + (3 << (16 + (devno << 2)));
235 new48 = (1 << devno) + (1 << (16 + (devno << 2)));
236 pci_write_config(parent, 0x48,
237 (pci_read_config(parent, 0x48, 4) &
238 ~mask48) | new48, 4);
239 pci_write_config(parent, 0x54, word54 | (0x1000<<devno), 2);
240 ata_dmacreate(atadev, apiomode, ATA_UDMA5);
241 return;
242 }
243 }
244 }
245 /* make sure eventual ATA100 mode from the BIOS is disabled */
246 pci_write_config(parent, 0x54,
247 pci_read_config(parent, 0x54, 2) & ~(0x1000<<devno),2);
248 /* FALLTHROUGH */
249
250 case 0x24118086: /* Intel ICH */
251 case 0x76018086: /* Intel ICH */
252 if (udmamode >= 4) {
253 int32_t mask48, new48;
254 int16_t word54;
255
256 word54 = pci_read_config(parent, 0x54, 2);
257 if (word54 & (0x10 << devno)) {
258 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
259 ATA_UDMA4, ATA_C_F_SETXFER, ATA_WAIT_READY);
260 if (bootverbose)
261 ata_prtdev(atadev, "%s setting UDMA4 on Intel chip\n",
262 (error) ? "failed" : "success");
263 if (!error) {
264 mask48 = (1 << devno) + (3 << (16 + (devno << 2)));
265 new48 = (1 << devno) + (2 << (16 + (devno << 2)));
266 pci_write_config(parent, 0x48,
267 (pci_read_config(parent, 0x48, 4) &
268 ~mask48) | new48, 4);
269 pci_write_config(parent, 0x54, word54 | (1 << devno), 2);
270 ata_dmacreate(atadev, apiomode, ATA_UDMA4);
271 return;
272 }
273 }
274 }
275 /* make sure eventual ATA66 mode from the BIOS is disabled */
276 pci_write_config(parent, 0x54,
277 pci_read_config(parent, 0x54, 2) & ~(1 << devno), 2);
278 /* FALLTHROUGH */
279
280 case 0x71118086: /* Intel PIIX4 */
281 case 0x84CA8086: /* Intel PIIX4 */
282 case 0x71998086: /* Intel PIIX4e */
283 case 0x24218086: /* Intel ICH0 */
284 if (udmamode >= 2) {
285 int32_t mask48, new48;
286
287 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
288 ATA_UDMA2, ATA_C_F_SETXFER, ATA_WAIT_READY);
289 if (bootverbose)
290 ata_prtdev(atadev, "%s setting UDMA2 on Intel chip\n",
291 (error) ? "failed" : "success");
292 if (!error) {
293 mask48 = (1 << devno) + (3 << (16 + (devno << 2)));
294 new48 = (1 << devno) + (2 << (16 + (devno << 2)));
295 pci_write_config(parent, 0x48,
296 (pci_read_config(parent, 0x48, 4) &
297 ~mask48) | new48, 4);
298 ata_dmacreate(atadev, apiomode, ATA_UDMA2);
299 return;
300 }
301 }
302 /* make sure eventual ATA33 mode from the BIOS is disabled */
303 pci_write_config(parent, 0x48,
304 pci_read_config(parent, 0x48, 4) & ~(1 << devno), 4);
305 /* FALLTHROUGH */
306
307 case 0x70108086: /* Intel PIIX3 */
308 if (wdmamode >= 2 && apiomode >= 4) {
309 int32_t mask40, new40, mask44, new44;
310
311 /* if SITRE not set doit for both channels */
312 if (!((pci_read_config(parent, 0x40, 4) >> (channel<<8)) & 0x4000)){
313 new40 = pci_read_config(parent, 0x40, 4);
314 new44 = pci_read_config(parent, 0x44, 4);
315 if (!(new40 & 0x00004000)) {
316 new44 &= ~0x0000000f;
317 new44 |= ((new40&0x00003000)>>10)|((new40&0x00000300)>>8);
318 }
319 if (!(new40 & 0x40000000)) {
320 new44 &= ~0x000000f0;
321 new44 |= ((new40&0x30000000)>>22)|((new40&0x03000000)>>20);
322 }
323 new40 |= 0x40004000;
324 pci_write_config(parent, 0x40, new40, 4);
325 pci_write_config(parent, 0x44, new44, 4);
326 }
327 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
328 ATA_WDMA2, ATA_C_F_SETXFER, ATA_WAIT_READY);
329 if (bootverbose)
330 ata_prtdev(atadev, "%s setting WDMA2 on Intel chip\n",
331 (error) ? "failed" : "success");
332 if (!error) {
333 if (device == ATA_MASTER) {
334 mask40 = 0x0000330f;
335 new40 = 0x00002307;
336 mask44 = 0;
337 new44 = 0;
338 }
339 else {
340 mask40 = 0x000000f0;
341 new40 = 0x00000070;
342 mask44 = 0x0000000f;
343 new44 = 0x0000000b;
344 }
345 if (channel) {
346 mask40 <<= 16;
347 new40 <<= 16;
348 mask44 <<= 4;
349 new44 <<= 4;
350 }
351 pci_write_config(parent, 0x40,
352 (pci_read_config(parent, 0x40, 4) & ~mask40)|
353 new40, 4);
354 pci_write_config(parent, 0x44,
355 (pci_read_config(parent, 0x44, 4) & ~mask44)|
356 new44, 4);
357 ata_dmacreate(atadev, apiomode, ATA_WDMA2);
358 return;
359 }
360 }
361 /* we could set PIO mode timings, but we assume the BIOS did that */
362 break;
363
364 case 0x12308086: /* Intel PIIX */
365 if (wdmamode >= 2 && apiomode >= 4) {
366 int32_t word40;
367
368 word40 = pci_read_config(parent, 0x40, 4);
369 word40 >>= channel * 16;
370
371 /* Check for timing config usable for DMA on controller */
372 if (!((word40 & 0x3300) == 0x2300 &&
373 ((word40 >> (device ? 4 : 0)) & 1) == 1))
374 break;
375
376 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
377 ATA_WDMA2, ATA_C_F_SETXFER, ATA_WAIT_READY);
378 if (bootverbose)
379 ata_prtdev(atadev, "%s setting WDMA2 on Intel chip\n",
380 (error) ? "failed" : "success");
381 if (!error) {
382 ata_dmacreate(atadev, apiomode, ATA_WDMA2);
383 return;
384 }
385 }
386 break;
387
388 case 0x522910b9: /* AcerLabs Aladdin IV/V */
389 /* the older Aladdin doesn't support ATAPI DMA on both master & slave */
390 if (chiprev < 0xc2 &&
391 atadev->channel->devices & ATA_ATAPI_MASTER &&
392 atadev->channel->devices & ATA_ATAPI_SLAVE) {
393 ata_prtdev(atadev, "two atapi devices on this channel, no DMA\n");
394 break;
395 }
396 pci_write_config(parent, 0x58 + (channel << 2), 0x00310001, 4);
397 if (udmamode >= 5 && chiprev >= 0xc4) {
398 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
399 ATA_UDMA5, ATA_C_F_SETXFER, ATA_WAIT_READY);
400 if (bootverbose)
401 ata_prtdev(atadev, "%s setting UDMA5 on Acer chip\n",
402 (error) ? "failed" : "success");
403 if (!error) {
404 int32_t word54 = pci_read_config(parent, 0x54, 4);
405
406 pci_write_config(parent, 0x4b,
407 pci_read_config(parent, 0x4b, 1) | 0x01, 1);
408 word54 &= ~(0x000f000f << (devno << 2));
409 word54 |= (0x000f0005 << (devno << 2));
410 pci_write_config(parent, 0x54, word54, 4);
411 pci_write_config(parent, 0x53,
412 pci_read_config(parent, 0x53, 1) | 0x03, 1);
413 ata_dmacreate(atadev, apiomode, ATA_UDMA5);
414 return;
415 }
416 }
417 if (udmamode >= 4 && chiprev >= 0xc2) {
418 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
419 ATA_UDMA4, ATA_C_F_SETXFER, ATA_WAIT_READY);
420 if (bootverbose)
421 ata_prtdev(atadev, "%s setting UDMA4 on Acer chip\n",
422 (error) ? "failed" : "success");
423 if (!error) {
424 int32_t word54 = pci_read_config(parent, 0x54, 4);
425
426 pci_write_config(parent, 0x4b,
427 pci_read_config(parent, 0x4b, 1) | 0x01, 1);
428 word54 &= ~(0x000f000f << (devno << 2));
429 word54 |= (0x00080005 << (devno << 2));
430 pci_write_config(parent, 0x54, word54, 4);
431 pci_write_config(parent, 0x53,
432 pci_read_config(parent, 0x53, 1) | 0x03, 1);
433 ata_dmacreate(atadev, apiomode, ATA_UDMA4);
434 return;
435 }
436 }
437 if (udmamode >= 2 && chiprev >= 0x20) {
438 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
439 ATA_UDMA2, ATA_C_F_SETXFER, ATA_WAIT_READY);
440 if (bootverbose)
441 ata_prtdev(atadev, "%s setting UDMA2 on Acer chip\n",
442 (error) ? "failed" : "success");
443 if (!error) {
444 int32_t word54 = pci_read_config(parent, 0x54, 4);
445
446 word54 &= ~(0x000f000f << (devno << 2));
447 word54 |= (0x000a0005 << (devno << 2));
448 pci_write_config(parent, 0x54, word54, 4);
449 pci_write_config(parent, 0x53,
450 pci_read_config(parent, 0x53, 1) | 0x03, 1);
451 atadev->channel->flags |= ATA_ATAPI_DMA_RO;
452 ata_dmacreate(atadev, apiomode, ATA_UDMA2);
453 return;
454 }
455 }
456
457 /* make sure eventual UDMA mode from the BIOS is disabled */
458 pci_write_config(parent, 0x56, pci_read_config(parent, 0x56, 2) &
459 ~(0x0008 << (devno << 2)), 2);
460
461 if (wdmamode >= 2 && apiomode >= 4) {
462 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
463 ATA_WDMA2, ATA_C_F_SETXFER, ATA_WAIT_READY);
464 if (bootverbose)
465 ata_prtdev(atadev, "%s setting WDMA2 on Acer chip\n",
466 (error) ? "failed" : "success");
467 if (!error) {
468 pci_write_config(parent, 0x53,
469 pci_read_config(parent, 0x53, 1) | 0x03, 1);
470 atadev->channel->flags |= ATA_ATAPI_DMA_RO;
471 ata_dmacreate(atadev, apiomode, ATA_WDMA2);
472 return;
473 }
474 }
475 pci_write_config(parent, 0x53,
476 (pci_read_config(parent, 0x53, 1) & ~0x01) | 0x02, 1);
477 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
478 ATA_PIO0 + apiomode,
479 ATA_C_F_SETXFER, ATA_WAIT_READY);
480 if (bootverbose)
481 ata_prtdev(atadev, "%s setting PIO%d on Acer chip\n",
482 (error) ? "failed" : "success",
483 (apiomode >= 0) ? apiomode : 0);
484 if (!error) {
485 int32_t word54 = pci_read_config(parent, 0x54, 4);
486 int32_t timing;
487
488 switch(ATA_PIO0 + apiomode) {
489 case ATA_PIO0: timing = 0x006d0003;
490 case ATA_PIO1: timing = 0x00580002;
491 case ATA_PIO2: timing = 0x00440001;
492 case ATA_PIO3: timing = 0x00330001;
493 case ATA_PIO4: timing = 0x00310001;
494 default: timing = 0x006d0003;
495 }
496 pci_write_config(parent, 0x58 + (channel << 2), timing, 4);
497 word54 &= ~(0x000f000f << (devno << 2));
498 word54 |= (0x00000004 << (devno << 2));
499 pci_write_config(parent, 0x54, word54, 4);
500 atadev->mode = ATA_PIO0 + apiomode;
501 return;
502 }
503 break;
504
505 case 0x74411022: /* AMD 768 */
506 case 0x74111022: /* AMD 766 */
507 if (udmamode >= 5) {
508 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
509 ATA_UDMA5, ATA_C_F_SETXFER, ATA_WAIT_READY);
510 if (bootverbose)
511 ata_prtdev(atadev, "%s setting UDMA5 on AMD chip\n",
512 (error) ? "failed" : "success");
513 if (!error) {
514 pci_write_config(parent, 0x53 - devno, 0xc6, 1);
515 ata_dmacreate(atadev, apiomode, ATA_UDMA5);
516 return;
517 }
518 }
519 /* FALLTHROUGH */
520
521 case 0x74091022: /* AMD 756 */
522 if (udmamode >= 4) {
523 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
524 ATA_UDMA4, ATA_C_F_SETXFER, ATA_WAIT_READY);
525 if (bootverbose)
526 ata_prtdev(atadev, "%s setting UDMA4 on AMD chip\n",
527 (error) ? "failed" : "success");
528 if (!error) {
529 pci_write_config(parent, 0x53 - devno, 0xc5, 1);
530 ata_dmacreate(atadev, apiomode, ATA_UDMA4);
531 return;
532 }
533 }
534 goto via_82c586;
535
536 case 0x05711106: /* VIA 82C571, 82C586, 82C596, 82C686 , 8231, 8233 */
537 {
538 int via_modes[4][7] = {
539 { 0x00, 0x00, 0xc0, 0x00, 0x00, 0x00, 0x00 }, /* ATA33 */
540 { 0x00, 0x00, 0xea, 0x00, 0xe8, 0x00, 0x00 }, /* ATA66 */
541 { 0x00, 0x00, 0xf4, 0x00, 0xf1, 0xf0, 0x00 }, /* ATA100 */
542 { 0x00, 0x00, 0xf6, 0x00, 0xf2, 0xf1, 0xf0 }}; /* ATA133 */
543 int *reg_val = NULL;
544
545 if (ata_find_dev(parent, 0x31471106, 0)) { /* 8233a */
546 udmamode = imin(udmamode, 6);
547 reg_val = via_modes[3];
548 }
549 else if (ata_find_dev(parent, 0x06861106, 0x40) || /* 82C686b */
550 ata_find_dev(parent, 0x82311106, 0) || /* 8231 */
551 ata_find_dev(parent, 0x30741106, 0) || /* 8233 */
552 ata_find_dev(parent, 0x31091106, 0)) { /* 8233c */
553 udmamode = imin(udmamode, 5);
554 reg_val = via_modes[2];
555 }
556 else if (ata_find_dev(parent, 0x06861106, 0x10) || /* 82C686a */
557 ata_find_dev(parent, 0x05961106, 0x12)) { /* 82C596b */
558 udmamode = imin(udmamode, 4);
559 reg_val = via_modes[1];
560 }
561 else if (ata_find_dev(parent, 0x06861106, 0)) { /* 82C686 */
562 udmamode = imin(udmamode, 2);
563 reg_val = via_modes[1];
564 }
565 else if (ata_find_dev(parent, 0x05961106, 0) || /* 82C596a */
566 ata_find_dev(parent, 0x05861106, 0x03)) { /* 82C586b */
567via_82c586:
568 udmamode = imin(udmamode, 2);
569 reg_val = via_modes[0];
570 }
571 else
572 udmamode = 0;
573
574 if (udmamode >= 6) {
575 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
576 ATA_UDMA6, ATA_C_F_SETXFER, ATA_WAIT_READY);
577 if (bootverbose)
578 ata_prtdev(atadev, "%s setting UDMA6 on VIA chip\n",
579 (error) ? "failed" : "success");
580 if (!error) {
581 pci_write_config(parent, 0x53 - devno, reg_val[6], 1);
582 ata_dmacreate(atadev, apiomode, ATA_UDMA6);
583 return;
584 }
585 }
586 if (udmamode >= 5) {
587 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
588 ATA_UDMA5, ATA_C_F_SETXFER, ATA_WAIT_READY);
589 if (bootverbose)
590 ata_prtdev(atadev, "%s setting UDMA5 on VIA chip\n",
591 (error) ? "failed" : "success");
592 if (!error) {
593 pci_write_config(parent, 0x53 - devno, reg_val[5], 1);
594 ata_dmacreate(atadev, apiomode, ATA_UDMA5);
595 return;
596 }
597 }
598 if (udmamode >= 4) {
599 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
600 ATA_UDMA4, ATA_C_F_SETXFER, ATA_WAIT_READY);
601 if (bootverbose)
602 ata_prtdev(atadev, "%s setting UDMA4 on VIA chip\n",
603 (error) ? "failed" : "success");
604 if (!error) {
605 pci_write_config(parent, 0x53 - devno, reg_val[4], 1);
606 ata_dmacreate(atadev, apiomode, ATA_UDMA4);
607 return;
608 }
609 }
610 if (udmamode >= 2) {
611 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
612 ATA_UDMA2, ATA_C_F_SETXFER, ATA_WAIT_READY);
613 if (bootverbose)
614 ata_prtdev(atadev, "%s setting UDMA2 on VIA chip\n",
615 (error) ? "failed" : "success");
616 if (!error) {
617 pci_write_config(parent, 0x53 - devno, reg_val[2], 1);
618 ata_dmacreate(atadev, apiomode, ATA_UDMA2);
619 return;
620 }
621 }
622
623 }
624 if (wdmamode >= 2 && apiomode >= 4) {
625 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
626 ATA_WDMA2, ATA_C_F_SETXFER, ATA_WAIT_READY);
627 if (bootverbose)
628 ata_prtdev(atadev, "%s setting WDMA2 on %s chip\n",
629 (error) ? "failed" : "success",
630 (chiptype == 0x74091022) ? "AMD" : "VIA");
631 if (!error) {
632 pci_write_config(parent, 0x53 - devno, 0x0b, 1);
633 pci_write_config(parent, 0x4b - devno, 0x31, 1);
634 ata_dmacreate(atadev, apiomode, ATA_WDMA2);
635 return;
636 }
637 }
638 /* we could set PIO mode timings, but we assume the BIOS did that */
639 break;
640
641 case 0x55131039: /* SiS 5591 */
642 if (ata_find_dev(parent, 0x06301039, 0x30) || /* SiS 630 */
643 ata_find_dev(parent, 0x06331039, 0) || /* SiS 633 */
644 ata_find_dev(parent, 0x06351039, 0) || /* SiS 635 */
645 ata_find_dev(parent, 0x06401039, 0) || /* SiS 640 */
646 ata_find_dev(parent, 0x06451039, 0) || /* SiS 645 */
647 ata_find_dev(parent, 0x06501039, 0) || /* SiS 650 */
648 ata_find_dev(parent, 0x07301039, 0) || /* SiS 730 */
649 ata_find_dev(parent, 0x07331039, 0) || /* SiS 733 */
650 ata_find_dev(parent, 0x07351039, 0) || /* SiS 735 */
651 ata_find_dev(parent, 0x07401039, 0) || /* SiS 740 */
652 ata_find_dev(parent, 0x07451039, 0) || /* SiS 745 */
653 ata_find_dev(parent, 0x07501039, 0)) { /* SiS 750 */
654 int8_t reg = 0x40 + (devno << 1);
655 int16_t val = pci_read_config(parent, reg, 2) & 0x0fff;
656
657 if (udmamode >= 5) {
658 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
659 ATA_UDMA5, ATA_C_F_SETXFER, ATA_WAIT_READY);
660 if (bootverbose)
661 ata_prtdev(atadev, "%s setting UDMA5 on SiS chip\n",
662 (error) ? "failed" : "success");
663 if (!error) {
664 pci_write_config(parent, reg, val | 0x8000, 2);
665 ata_dmacreate(atadev, apiomode, ATA_UDMA5);
666 return;
667 }
668 }
669 if (udmamode >= 4) {
670 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
671 ATA_UDMA4, ATA_C_F_SETXFER, ATA_WAIT_READY);
672 if (bootverbose)
673 ata_prtdev(atadev, "%s setting UDMA4 on SiS chip\n",
674 (error) ? "failed" : "success");
675 if (!error) {
676 pci_write_config(parent, reg, val | 0x9000, 2);
677 ata_dmacreate(atadev, apiomode, ATA_UDMA4);
678 return;
679 }
680 }
681 if (udmamode >= 2) {
682 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
683 ATA_UDMA2, ATA_C_F_SETXFER, ATA_WAIT_READY);
684 if (bootverbose)
685 ata_prtdev(atadev, "%s setting UDMA2 on SiS chip\n",
686 (error) ? "failed" : "success");
687 if (!error) {
688 pci_write_config(parent, reg, val | 0xb000, 2);
689 ata_dmacreate(atadev, apiomode, ATA_UDMA2);
690 return;
691 }
692 }
693 } else if (ata_find_dev(parent, 0x05301039, 0) || /* SiS 530 */
694 ata_find_dev(parent, 0x05401039, 0) || /* SiS 540 */
695 ata_find_dev(parent, 0x06201039, 0) || /* SiS 620 */
696 ata_find_dev(parent, 0x06301039, 0)) { /* SiS 630 */
697 int8_t reg = 0x40 + (devno << 1);
698 int16_t val = pci_read_config(parent, reg, 2) & 0x0fff;
699
700 if (udmamode >= 4) {
701 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
702 ATA_UDMA4, ATA_C_F_SETXFER, ATA_WAIT_READY);
703 if (bootverbose)
704 ata_prtdev(atadev, "%s setting UDMA4 on SiS chip\n",
705 (error) ? "failed" : "success");
706 if (!error) {
707 pci_write_config(parent, reg, val | 0x9000, 2);
708 ata_dmacreate(atadev, apiomode, ATA_UDMA4);
709 return;
710 }
711 }
712 if (udmamode >= 2) {
713 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
714 ATA_UDMA2, ATA_C_F_SETXFER, ATA_WAIT_READY);
715 if (bootverbose)
716 ata_prtdev(atadev, "%s setting UDMA2 on SiS chip\n",
717 (error) ? "failed" : "success");
718 if (!error) {
719 pci_write_config(parent, reg, val | 0xa000, 2);
720 ata_dmacreate(atadev, apiomode, ATA_UDMA2);
721 return;
722 }
723 }
724 } else if (udmamode >= 2 && chiprev > 0xc1) {
725 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
726 ATA_UDMA2, ATA_C_F_SETXFER, ATA_WAIT_READY);
727 if (bootverbose)
728 ata_prtdev(atadev, "%s setting UDMA2 on SiS chip\n",
729 (error) ? "failed" : "success");
730 if (!error) {
731 pci_write_config(parent, 0x40 + (devno << 1), 0xa301, 2);
732 ata_dmacreate(atadev, apiomode, ATA_UDMA2);
733 return;
734 }
735 }
736 if (wdmamode >=2 && apiomode >= 4) {
737 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
738 ATA_WDMA2, ATA_C_F_SETXFER, ATA_WAIT_READY);
739 if (bootverbose)
740 ata_prtdev(atadev, "%s setting WDMA2 on SiS chip\n",
741 (error) ? "failed" : "success");
742 if (!error) {
743 pci_write_config(parent, 0x40 + (devno << 1), 0x0301, 2);
744 ata_dmacreate(atadev, apiomode, ATA_WDMA2);
745 return;
746 }
747 }
748 /* we could set PIO mode timings, but we assume the BIOS did that */
749 break;
750
751 case 0x06491095: /* CMD 649 ATA100 controller */
752 if (udmamode >= 5) {
753 u_int8_t umode;
754
755 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
756 ATA_UDMA5, ATA_C_F_SETXFER, ATA_WAIT_READY);
757 if (bootverbose)
758 ata_prtdev(atadev, "%s setting UDMA5 on CMD chip\n",
759 (error) ? "failed" : "success");
760 if (!error) {
761 umode = pci_read_config(parent, channel ? 0x7b : 0x73, 1);
762 umode &= ~(device ? 0xca : 0x35);
763 umode |= (device ? 0x0a : 0x05);
764 pci_write_config(parent, channel ? 0x7b : 0x73, umode, 1);
765 ata_dmacreate(atadev, apiomode, ATA_UDMA5);
766 return;
767 }
768 }
769 /* FALLTHROUGH */
770
771 case 0x06481095: /* CMD 648 ATA66 controller */
772 if (udmamode >= 4) {
773 u_int8_t umode;
774
775 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
776 ATA_UDMA4, ATA_C_F_SETXFER, ATA_WAIT_READY);
777 if (bootverbose)
778 ata_prtdev(atadev, "%s setting UDMA4 on CMD chip\n",
779 (error) ? "failed" : "success");
780 if (!error) {
781 umode = pci_read_config(parent, channel ? 0x7b : 0x73, 1);
782 umode &= ~(device ? 0xca : 0x35);
783 umode |= (device ? 0x4a : 0x15);
784 pci_write_config(parent, channel ? 0x7b : 0x73, umode, 1);
785 ata_dmacreate(atadev, apiomode, ATA_UDMA4);
786 return;
787 }
788 }
789 if (udmamode >= 2) {
790 u_int8_t umode;
791
792 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
793 ATA_UDMA2, ATA_C_F_SETXFER, ATA_WAIT_READY);
794 if (bootverbose)
795 ata_prtdev(atadev, "%s setting UDMA2 on CMD chip\n",
796 (error) ? "failed" : "success");
797 if (!error) {
798 umode = pci_read_config(parent, channel ? 0x7b : 0x73, 1);
799 umode &= ~(device ? 0xca : 0x35);
800 umode |= (device ? 0x42 : 0x11);
801 pci_write_config(parent, channel ? 0x7b : 0x73, umode, 1);
802 ata_dmacreate(atadev, apiomode, ATA_UDMA2);
803 return;
804 }
805 }
806 /* make sure eventual UDMA mode from the BIOS is disabled */
807 pci_write_config(parent, channel ? 0x7b : 0x73,
808 pci_read_config(parent, channel ? 0x7b : 0x73, 1) &
809 ~(device ? 0xca : 0x53), 1);
810 /* FALLTHROUGH */
811
812 case 0x06461095: /* CMD 646 ATA controller */
813 if (wdmamode >= 2 && apiomode >= 4) {
814 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
815 ATA_WDMA2, ATA_C_F_SETXFER, ATA_WAIT_READY);
816 if (bootverbose)
817 ata_prtdev(atadev, "%s setting WDMA2 on CMD chip\n",
818 error ? "failed" : "success");
819 if (!error) {
820 int32_t offset = (devno < 3) ? (devno << 1) : 7;
821
822 pci_write_config(parent, 0x54 + offset, 0x3f, 1);
823 ata_dmacreate(atadev, apiomode, ATA_WDMA2);
824 return;
825 }
826 }
827 /* we could set PIO mode timings, but we assume the BIOS did that */
828 break;
829
830 case 0xc6931080: /* Cypress 82c693 ATA controller */
831 if (wdmamode >= 2 && apiomode >= 4) {
832 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
833 ATA_WDMA2, ATA_C_F_SETXFER, ATA_WAIT_READY);
834 if (bootverbose)
835 ata_prtdev(atadev, "%s setting WDMA2 on Cypress chip\n",
836 error ? "failed" : "success");
837 if (!error) {
838 pci_write_config(atadev->channel->dev,
839 channel ? 0x4e:0x4c, 0x2020, 2);
840 ata_dmacreate(atadev, apiomode, ATA_WDMA2);
841 return;
842 }
843 }
844 /* we could set PIO mode timings, but we assume the BIOS did that */
845 break;
846
847 case 0x01021078: /* Cyrix 5530 ATA33 controller */
848 atadev->channel->alignment = 0xf;
849 if (udmamode >= 2) {
850 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
851 ATA_UDMA2, ATA_C_F_SETXFER, ATA_WAIT_READY);
852 if (bootverbose)
853 ata_prtdev(atadev, "%s setting UDMA2 on Cyrix chip\n",
854 (error) ? "failed" : "success");
855 if (!error) {
856 cyrix_timing(atadev, devno, ATA_UDMA2);
857 ata_dmacreate(atadev, apiomode, ATA_UDMA2);
858 return;
859 }
860 }
861 if (wdmamode >= 2 && apiomode >= 4) {
862 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
863 ATA_WDMA2, ATA_C_F_SETXFER, ATA_WAIT_READY);
864 if (bootverbose)
865 ata_prtdev(atadev, "%s setting WDMA2 on Cyrix chip\n",
866 (error) ? "failed" : "success");
867 if (!error) {
868 cyrix_timing(atadev, devno, ATA_WDMA2);
869 ata_dmacreate(atadev, apiomode, ATA_WDMA2);
870 return;
871 }
872 }
873 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
874 ATA_PIO0 + apiomode, ATA_C_F_SETXFER,
875 ATA_WAIT_READY);
876 if (bootverbose)
877 ata_prtdev(atadev, "%s setting %s on Cyrix chip\n",
878 (error) ? "failed" : "success",
879 ata_mode2str(ATA_PIO0 + apiomode));
880 cyrix_timing(atadev, devno, ATA_PIO0 + apiomode);
881 atadev->mode = ATA_PIO0 + apiomode;
882 return;
883
884 case 0x02121166: /* ServerWorks CSB5 ATA66/100 controller */
885 if (udmamode >= 5 && chiprev >= 0x92) {
886 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
887 ATA_UDMA5, ATA_C_F_SETXFER, ATA_WAIT_READY);
888 if (bootverbose)
889 ata_prtdev(atadev, "%s setting UDMA5 on ServerWorks chip\n",
890 (error) ? "failed" : "success");
891 if (!error) {
892 u_int16_t reg56;
893
894 pci_write_config(parent, 0x54,
895 pci_read_config(parent, 0x54, 1) |
896 (0x01 << devno), 1);
897 reg56 = pci_read_config(parent, 0x56, 2);
898 reg56 &= ~(0xf << (devno * 4));
899 reg56 |= (0x5 << (devno * 4));
900 pci_write_config(parent, 0x56, reg56, 2);
901 ata_dmacreate(atadev, apiomode, ATA_UDMA5);
902 return;
903 }
904 }
905 if (udmamode >= 4) {
906 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
907 ATA_UDMA4, ATA_C_F_SETXFER, ATA_WAIT_READY);
908 if (bootverbose)
909 ata_prtdev(atadev, "%s setting UDMA4 on ServerWorks chip\n",
910 (error) ? "failed" : "success");
911 if (!error) {
912 u_int16_t reg56;
913
914 pci_write_config(parent, 0x54,
915 pci_read_config(parent, 0x54, 1) |
916 (0x01 << devno), 1);
917 reg56 = pci_read_config(parent, 0x56, 2);
918 reg56 &= ~(0xf << (devno * 4));
919 reg56 |= (0x4 << (devno * 4));
920 pci_write_config(parent, 0x56, reg56, 2);
921 ata_dmacreate(atadev, apiomode, ATA_UDMA4);
922 return;
923 }
924 }
925 /* FALLTHROUGH */
926
927 case 0x02111166: /* ServerWorks ROSB4 ATA33 controller */
928 if (udmamode >= 2) {
929 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
930 ATA_UDMA2, ATA_C_F_SETXFER, ATA_WAIT_READY);
931 if (bootverbose)
932 ata_prtdev(atadev, "%s setting UDMA2 on ServerWorks chip\n",
933 (error) ? "failed" : "success");
934 if (!error) {
935 u_int16_t reg56;
936
937 pci_write_config(parent, 0x54,
938 pci_read_config(parent, 0x54, 1) |
939 (0x01 << devno), 1);
940 reg56 = pci_read_config(parent, 0x56, 2);
941 reg56 &= ~(0xf << (devno * 4));
942 reg56 |= (0x2 << (devno * 4));
943 pci_write_config(parent, 0x56, reg56, 2);
944 ata_dmacreate(atadev, apiomode, ATA_UDMA2);
945 return;
946 }
947 }
948 if (wdmamode >= 2 && apiomode >= 4) {
949 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
950 ATA_WDMA2, ATA_C_F_SETXFER, ATA_WAIT_READY);
951 if (bootverbose)
952 ata_prtdev(atadev, "%s setting WDMA2 on ServerWorks chip\n",
953 (error) ? "failed" : "success");
954 if (!error) {
955 int offset = devno ^ 0x01;
956 int word44 = pci_read_config(parent, 0x44, 4);
957
958 pci_write_config(parent, 0x54,
959 pci_read_config(parent, 0x54, 1) &
960 ~(0x01 << devno), 1);
961 word44 &= ~(0xff << (offset << 8));
962 word44 |= (0x20 << (offset << 8));
963 pci_write_config(parent, 0x44, 0x20, 4);
964 ata_dmacreate(atadev, apiomode, ATA_WDMA2);
965 return;
966 }
967 }
968 /* we could set PIO mode timings, but we assume the BIOS did that */
969 break;
970
971 case 0x4d69105a: /* Promise TX2 ATA133 controllers */
972 case 0x5275105a: /* Promise TX2 ATA133 controllers */
973 ATA_OUTB(atadev->channel->r_bmio, ATA_BMDEVSPEC_0, 0x0b);
974 if (udmamode >= 6 &&
975 !(ATA_INB(atadev->channel->r_bmio, ATA_BMDEVSPEC_1) & 0x04)) {
976 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
977 ATA_UDMA6, ATA_C_F_SETXFER, ATA_WAIT_READY);
978 if (bootverbose)
979 ata_prtdev(atadev, "%s setting UDMA6 on Promise chip\n",
980 (error) ? "failed" : "success");
981 if (!error) {
982 ata_dmacreate(atadev, apiomode, ATA_UDMA6);
983 return;
984 }
985 }
986 /* FALLTHROUGH */
987
988 case 0x4d68105a: /* Promise TX2 ATA100 controllers */
989 case 0x6268105a: /* Promise TX2 ATA100 controllers */
990 ATA_OUTB(atadev->channel->r_bmio, ATA_BMDEVSPEC_0, 0x0b);
991 if (udmamode >= 5 &&
992 !(ATA_INB(atadev->channel->r_bmio, ATA_BMDEVSPEC_1) & 0x04)) {
993 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
994 ATA_UDMA5, ATA_C_F_SETXFER, ATA_WAIT_READY);
995 if (bootverbose)
996 ata_prtdev(atadev, "%s setting UDMA5 on Promise chip\n",
997 (error) ? "failed" : "success");
998 if (!error) {
999 ata_dmacreate(atadev, apiomode, ATA_UDMA5);
1000 return;
1001 }
1002 }
1003 ATA_OUTB(atadev->channel->r_bmio, ATA_BMDEVSPEC_0, 0x0b);
1004 if (udmamode >= 4 &&
1005 !(ATA_INB(atadev->channel->r_bmio, ATA_BMDEVSPEC_1) & 0x04)) {
1006 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
1007 ATA_UDMA4, ATA_C_F_SETXFER, ATA_WAIT_READY);
1008 if (bootverbose)
1009 ata_prtdev(atadev, "%s setting UDMA4 on Promise chip\n",
1010 (error) ? "failed" : "success");
1011 if (!error) {
1012 ata_dmacreate(atadev, apiomode, ATA_UDMA4);
1013 return;
1014 }
1015 }
1016 if (udmamode >= 2) {
1017 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
1018 ATA_UDMA2, ATA_C_F_SETXFER, ATA_WAIT_READY);
1019 if (bootverbose)
1020 ata_prtdev(atadev, "%s setting UDMA on Promise chip\n",
1021 (error) ? "failed" : "success");
1022 if (!error) {
1023 ata_dmacreate(atadev, apiomode, ATA_UDMA2);
1024 return;
1025 }
1026 }
1027 if (wdmamode >= 2 && apiomode >= 4) {
1028 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
1029 ATA_WDMA2, ATA_C_F_SETXFER, ATA_WAIT_READY);
1030 if (bootverbose)
1031 ata_prtdev(atadev, "%s setting WDMA2 on Promise chip\n",
1032 (error) ? "failed" : "success");
1033 if (!error) {
1034 ata_dmacreate(atadev, apiomode, ATA_WDMA2);
1035 return;
1036 }
1037 }
1038 break;
1039
1040 case 0x4d30105a: /* Promise Ultra/FastTrak 100 controllers */
1041 case 0x0d30105a: /* Promise OEM ATA100 controllers */
1042 if (!ATAPI_DEVICE(atadev) && udmamode >= 5 &&
1043 !(pci_read_config(parent, 0x50, 2) & (channel ? 1<<11 : 1<<10))) {
1044 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
1045 ATA_UDMA5, ATA_C_F_SETXFER, ATA_WAIT_READY);
1046 if (bootverbose)
1047 ata_prtdev(atadev, "%s setting UDMA5 on Promise chip\n",
1048 (error) ? "failed" : "success");
1049 if (!error) {
1050 promise_timing(atadev, devno, ATA_UDMA5);
1051 ata_dmacreate(atadev, apiomode, ATA_UDMA5);
1052 return;
1053 }
1054 }
1055 /* FALLTHROUGH */
1056
1057 case 0x4d38105a: /* Promise Ultra/FastTrak 66 controllers */
1058 if (!ATAPI_DEVICE(atadev) && udmamode >= 4 &&
1059 !(pci_read_config(parent, 0x50, 2) & (channel ? 1<<11 : 1<<10))) {
1060 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
1061 ATA_UDMA4, ATA_C_F_SETXFER, ATA_WAIT_READY);
1062 if (bootverbose)
1063 ata_prtdev(atadev, "%s setting UDMA4 on Promise chip\n",
1064 (error) ? "failed" : "success");
1065 if (!error) {
1066 promise_timing(atadev, devno, ATA_UDMA4);
1067 ata_dmacreate(atadev, apiomode, ATA_UDMA4);
1068 return;
1069 }
1070 }
1071 /* FALLTHROUGH */
1072
1073 case 0x4d33105a: /* Promise Ultra/FastTrak 33 controllers */
1074 if (!ATAPI_DEVICE(atadev) && udmamode >= 2) {
1075 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
1076 ATA_UDMA2, ATA_C_F_SETXFER, ATA_WAIT_READY);
1077 if (bootverbose)
1078 ata_prtdev(atadev, "%s setting UDMA2 on Promise chip\n",
1079 (error) ? "failed" : "success");
1080 if (!error) {
1081 promise_timing(atadev, devno, ATA_UDMA2);
1082 ata_dmacreate(atadev, apiomode, ATA_UDMA2);
1083 return;
1084 }
1085 }
1086 if (!ATAPI_DEVICE(atadev) && wdmamode >= 2 && apiomode >= 4) {
1087 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
1088 ATA_WDMA2, ATA_C_F_SETXFER, ATA_WAIT_READY);
1089 if (bootverbose)
1090 ata_prtdev(atadev, "%s setting WDMA2 on Promise chip\n",
1091 (error) ? "failed" : "success");
1092 if (!error) {
1093 promise_timing(atadev, devno, ATA_WDMA2);
1094 ata_dmacreate(atadev, apiomode, ATA_WDMA2);
1095 return;
1096 }
1097 }
1098 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
1099 ATA_PIO0 + apiomode,
1100 ATA_C_F_SETXFER, ATA_WAIT_READY);
1101 if (bootverbose)
1102 ata_prtdev(atadev, "%s setting PIO%d on Promise chip\n",
1103 (error) ? "failed" : "success",
1104 (apiomode >= 0) ? apiomode : 0);
1105 promise_timing(atadev, devno, ATA_PIO0 + apiomode);
1106 atadev->mode = ATA_PIO0 + apiomode;
1107 return;
1108
1109 case 0x00041103: /* HighPoint HPT366/368/370/372 controllers */
1110 case 0x00051103: /* HighPoint HPT372 controllers */
1111 case 0x00081103: /* HighPoint HPT374 controllers */
1112 if (!ATAPI_DEVICE(atadev) && udmamode >= 6 && hpt_cable80(atadev) &&
1113 ((chiptype == 0x00041103 && chiprev >= 0x05) ||
1114 (chiptype == 0x00051103 && chiprev >= 0x01) ||
1115 (chiptype == 0x00081103 && chiprev >= 0x07))) {
1116 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
1117 ATA_UDMA6, ATA_C_F_SETXFER, ATA_WAIT_READY);
1118 if (bootverbose)
1119 ata_prtdev(atadev, "%s setting UDMA6 on HighPoint chip\n",
1120 (error) ? "failed" : "success");
1121 if (!error) {
1122 hpt_timing(atadev, devno, ATA_UDMA6);
1123 ata_dmacreate(atadev, apiomode, ATA_UDMA6);
1124 return;
1125 }
1126 }
1127 if (!ATAPI_DEVICE(atadev) && udmamode >= 5 && hpt_cable80(atadev) &&
1128 ((chiptype == 0x00041103 && chiprev >= 0x03) ||
1129 (chiptype == 0x00051103 && chiprev >= 0x01) ||
1130 (chiptype == 0x00081103 && chiprev >= 0x07))) {
1131 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
1132 ATA_UDMA5, ATA_C_F_SETXFER, ATA_WAIT_READY);
1133 if (bootverbose)
1134 ata_prtdev(atadev, "%s setting UDMA5 on HighPoint chip\n",
1135 (error) ? "failed" : "success");
1136 if (!error) {
1137 hpt_timing(atadev, devno, ATA_UDMA5);
1138 ata_dmacreate(atadev, apiomode, ATA_UDMA5);
1139 return;
1140 }
1141 }
1142 if (!ATAPI_DEVICE(atadev) && udmamode >= 4 && hpt_cable80(atadev)) {
1143 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
1144 ATA_UDMA4, ATA_C_F_SETXFER, ATA_WAIT_READY);
1145 if (bootverbose)
1146 ata_prtdev(atadev, "%s setting UDMA4 on HighPoint chip\n",
1147 (error) ? "failed" : "success");
1148 if (!error) {
1149 hpt_timing(atadev, devno, ATA_UDMA4);
1150 ata_dmacreate(atadev, apiomode, ATA_UDMA4);
1151 return;
1152 }
1153 }
1154 if (!ATAPI_DEVICE(atadev) && udmamode >= 2) {
1155 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
1156 ATA_UDMA2, ATA_C_F_SETXFER, ATA_WAIT_READY);
1157 if (bootverbose)
1158 ata_prtdev(atadev, "%s setting UDMA2 on HighPoint chip\n",
1159 (error) ? "failed" : "success");
1160 if (!error) {
1161 hpt_timing(atadev, devno, ATA_UDMA2);
1162 ata_dmacreate(atadev, apiomode, ATA_UDMA2);
1163 return;
1164 }
1165 }
1166 if (!ATAPI_DEVICE(atadev) && wdmamode >= 2 && apiomode >= 4) {
1167 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
1168 ATA_WDMA2, ATA_C_F_SETXFER, ATA_WAIT_READY);
1169 if (bootverbose)
1170 ata_prtdev(atadev, "%s setting WDMA2 on HighPoint chip\n",
1171 (error) ? "failed" : "success");
1172 if (!error) {
1173 hpt_timing(atadev, devno, ATA_WDMA2);
1174 ata_dmacreate(atadev, apiomode, ATA_WDMA2);
1175 return;
1176 }
1177 }
1178 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
1179 ATA_PIO0 + apiomode,
1180 ATA_C_F_SETXFER, ATA_WAIT_READY);
1181 if (bootverbose)
1182 ata_prtdev(atadev, "%s setting PIO%d on HighPoint chip\n",
1183 (error) ? "failed" : "success",
1184 (apiomode >= 0) ? apiomode : 0);
1185 hpt_timing(atadev, devno, ATA_PIO0 + apiomode);
1186 atadev->mode = ATA_PIO0 + apiomode;
1187 return;
1188
1189 case 0x000116ca: /* Cenatek Rocket Drive controller */
1190 if (wdmamode >= 0 &&
1191 (ATA_INB(atadev->channel->r_bmio, ATA_BMSTAT_PORT) &
1192 (device ? ATA_BMSTAT_DMA_SLAVE : ATA_BMSTAT_DMA_MASTER)))
1193 ata_dmacreate(atadev, apiomode, ATA_DMA);
1194 else
1195 atadev->mode = ATA_PIO;
1196 return;
1197
1198 default: /* unknown controller chip */
1199 /* better not try generic DMA on ATAPI devices it almost never works */
1200 if (ATAPI_DEVICE(atadev))
1201 break;
1202
1203 /* if controller says its setup for DMA take the easy way out */
1204 /* the downside is we dont know what DMA mode we are in */
1205 if ((udmamode >= 0 || wdmamode >= 2) &&
1206 (ATA_INB(atadev->channel->r_bmio, ATA_BMSTAT_PORT) &
1207 (device ? ATA_BMSTAT_DMA_SLAVE : ATA_BMSTAT_DMA_MASTER))) {
1208 ata_dmacreate(atadev, apiomode, ATA_DMA);
1209 return;
1210 }
1211
1212 /* well, we have no support for this, but try anyways */
1213 if ((wdmamode >= 2 && apiomode >= 4) && atadev->channel->r_bmio) {
1214 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
1215 ATA_WDMA2, ATA_C_F_SETXFER, ATA_WAIT_READY);
1216 if (bootverbose)
1217 ata_prtdev(atadev, "%s setting WDMA2 on generic chip\n",
1218 (error) ? "failed" : "success");
1219 if (!error) {
1220 ata_dmacreate(atadev, apiomode, ATA_WDMA2);
1221 return;
1222 }
1223 }
1224 }
1225 error = ata_command(atadev, ATA_C_SETFEATURES, 0, ATA_PIO0 + apiomode,
1226 ATA_C_F_SETXFER, ATA_WAIT_READY);
1227 if (bootverbose)
1228 ata_prtdev(atadev, "%s setting PIO%d on generic chip\n",
1229 (error) ? "failed" : "success", apiomode < 0 ? 0 : apiomode);
1230 if (!error)
1231 atadev->mode = ATA_PIO0 + apiomode;
1232 else {
1233 if (bootverbose)
1234 ata_prtdev(atadev, "using PIO mode set by BIOS\n");
1235 atadev->mode = ATA_PIO;
1236 }
1237}
1238
1239struct ata_dmasetup_data_cb_args {
1240 struct ata_dmaentry *dmatab;
1241 int error;
1242};
1243
1244static void
1245ata_dmasetupd_cb(void *xsc, bus_dma_segment_t *segs, int nsegs, int error)
1246{
1247 struct ata_dmasetup_data_cb_args *cba =
1248 (struct ata_dmasetup_data_cb_args *)xsc;
1249 bus_size_t cnt;
1250 u_int32_t lastcount;
1251 int i, j;
1252
1253 cba->error = error;
1254 if (error != 0)
1255 return;
1256 lastcount = j = 0;
1257 for (i = 0; i < nsegs; i++) {
1258 /*
1259 * A maximum segment size was specified for bus_dma_tag_create, but
1260 * some busdma code does not seem to honor this, so fix up if needed.
1261 */
1262 for (cnt = 0; cnt < segs[i].ds_len; cnt += MAXSEGSZ, j++) {
1263 cba->dmatab[j].base = htole32(segs[i].ds_addr + cnt);
1264 lastcount = ulmin(segs[i].ds_len - cnt, MAXSEGSZ) & 0xffff;
1265 cba->dmatab[j].count = htole32(lastcount);
1266 }
1267 }
1268 cba->dmatab[j - 1].count = htole32(lastcount | ATA_DMA_EOT);
1269}
1270
1271int
1272ata_dmasetup(struct ata_device *atadev, caddr_t data, int32_t count)
1273{
1274 struct ata_channel *ch = atadev->channel;
1275 struct ata_dmastate *ds = &atadev->dmastate;
1276 struct ata_dmasetup_data_cb_args cba;
1277
1278 if (ds->flags & ATA_DS_ACTIVE)
1279 panic("ata_dmasetup: transfer active on this device!");
1280
1281 if (((uintptr_t)data & ch->alignment) || (count & ch->alignment)) {
1282 ata_prtdev(atadev, "non aligned DMA transfer attempted\n");
1283 return -1;
1284 }
1285
1286 if (!count) {
1287 ata_prtdev(atadev, "zero length DMA transfer attempted\n");
1288 return -1;
1289 }
1290
1291 cba.dmatab = ds->dmatab;
1292 if (bus_dmamap_load(ds->ddmatag, ds->ddmamap, data, count,
1293 ata_dmasetupd_cb, &cba, 0) || cba.error)
1294 ds->flags = ATA_DS_ACTIVE;
1295 bus_dmamap_sync(ds->cdmatag, ds->cdmamap, BUS_DMASYNC_PREWRITE);
1296
1297 return 0;
1298}
1299
1300void
1301ata_dmastart(struct ata_device *atadev, int dir)
1302{
1303 struct ata_channel *ch;
1304 struct ata_dmastate *ds;
1305
1306 ch = atadev->channel;
1307 ds = &atadev->dmastate;
1308 bus_dmamap_sync(ds->ddmatag, ds->ddmamap, dir ? BUS_DMASYNC_PREREAD :
1309 BUS_DMASYNC_PREWRITE);
1310 if (dir)
1311 ds->flags |= ATA_DS_READ;
1312 ch->flags |= ATA_DMA_ACTIVE;
1313 ATA_OUTL(ch->r_bmio, ATA_BMDTP_PORT, ds->mdmatab);
1314 ATA_OUTB(ch->r_bmio, ATA_BMCMD_PORT, dir ? ATA_BMCMD_WRITE_READ : 0);
1315 ATA_OUTB(ch->r_bmio, ATA_BMSTAT_PORT,
1316 (ATA_INB(ch->r_bmio, ATA_BMSTAT_PORT) |
1317 (ATA_BMSTAT_INTERRUPT | ATA_BMSTAT_ERROR)));
1318 ATA_OUTB(ch->r_bmio, ATA_BMCMD_PORT,
1319 ATA_INB(ch->r_bmio, ATA_BMCMD_PORT) | ATA_BMCMD_START_STOP);
1320}
1321
1322int
1323ata_dmadone(struct ata_device *atadev)
1324{
1325 struct ata_channel *ch;
1326 struct ata_dmastate *ds;
1327 int error;
1328
1329 ch = atadev->channel;
1330 ds = &atadev->dmastate;
1331 bus_dmamap_sync(ds->ddmatag, ds->ddmamap, (ds->flags & ATA_DS_READ) != 0 ?
1332 BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE);
1333 bus_dmamap_unload(ds->ddmatag, ds->ddmamap);
1334 ATA_OUTB(ch->r_bmio, ATA_BMCMD_PORT,
1335 ATA_INB(ch->r_bmio, ATA_BMCMD_PORT) & ~ATA_BMCMD_START_STOP);
1336 ch->flags &= ~ATA_DMA_ACTIVE;
1337 error = ATA_INB(ch->r_bmio, ATA_BMSTAT_PORT);
1338 ATA_OUTB(ch->r_bmio, ATA_BMSTAT_PORT,
1339 error | ATA_BMSTAT_INTERRUPT | ATA_BMSTAT_ERROR);
1340 ds->flags = 0;
1341 return error & ATA_BMSTAT_MASK;
1342}
1343
1344int
1345ata_dmastatus(struct ata_channel *ch)
1346{
1347 return ATA_INB(ch->r_bmio, ATA_BMSTAT_PORT) & ATA_BMSTAT_MASK;
1348}
1349
1350static void
1351cyrix_timing(struct ata_device *atadev, int devno, int mode)
1352{
1353 u_int32_t reg20 = 0x0000e132;
1354 u_int32_t reg24 = 0x00017771;
1355
1356 switch (mode) {
1357 case ATA_PIO0: reg20 = 0x0000e132; break;
1358 case ATA_PIO1: reg20 = 0x00018121; break;
1359 case ATA_PIO2: reg20 = 0x00024020; break;
1360 case ATA_PIO3: reg20 = 0x00032010; break;
1361 case ATA_PIO4: reg20 = 0x00040010; break;
1362 case ATA_WDMA2: reg24 = 0x00002020; break;
1363 case ATA_UDMA2: reg24 = 0x00911030; break;
1364 }
1365 ATA_OUTL(atadev->channel->r_bmio, (devno << 3) + 0x20, reg20);
1366 ATA_OUTL(atadev->channel->r_bmio, (devno << 3) + 0x24, reg24);
1367}
1368
1369static void
1370promise_timing(struct ata_device *atadev, int devno, int mode)
1371{
1372 u_int32_t timing = 0;
1373 /* XXX: Endianess */
1374 struct promise_timing {
1375 u_int8_t pa:4;
1376 u_int8_t prefetch:1;
1377 u_int8_t iordy:1;
1378 u_int8_t errdy:1;
1379 u_int8_t syncin:1;
1380 u_int8_t pb:5;
1381 u_int8_t mb:3;
1382 u_int8_t mc:4;
1383 u_int8_t dmaw:1;
1384 u_int8_t dmar:1;
1385 u_int8_t iordyp:1;
1386 u_int8_t dmarqp:1;
1387 u_int8_t reserved:8;
1388 } *t = (struct promise_timing*)&timing;
1389
1390 t->iordy = 1; t->iordyp = 1;
1391 if (mode >= ATA_DMA) {
1392 t->prefetch = 1; t->errdy = 1; t->syncin = 1;
1393 }
1394
1395 switch (atadev->channel->chiptype) {
1396 case 0x4d33105a: /* Promise Ultra/Fasttrak 33 */
1397 switch (mode) {
1398 default:
1399 case ATA_PIO0: t->pa = 9; t->pb = 19; t->mb = 7; t->mc = 15; break;
1400 case ATA_PIO1: t->pa = 5; t->pb = 12; t->mb = 7; t->mc = 15; break;
1401 case ATA_PIO2: t->pa = 3; t->pb = 8; t->mb = 7; t->mc = 15; break;
1402 case ATA_PIO3: t->pa = 2; t->pb = 6; t->mb = 7; t->mc = 15; break;
1403 case ATA_PIO4: t->pa = 1; t->pb = 4; t->mb = 7; t->mc = 15; break;
1404 case ATA_WDMA2: t->pa = 3; t->pb = 7; t->mb = 3; t->mc = 3; break;
1405 case ATA_UDMA2: t->pa = 3; t->pb = 7; t->mb = 1; t->mc = 1; break;
1406 }
1407 break;
1408
1409 case 0x4d38105a: /* Promise Ultra/Fasttrak 66 */
1410 case 0x4d30105a: /* Promise Ultra/Fasttrak 100 */
1411 case 0x0d30105a: /* Promise OEM ATA 100 */
1412 switch (mode) {
1413 default:
1414 case ATA_PIO0: t->pa = 15; t->pb = 31; t->mb = 7; t->mc = 15; break;
1415 case ATA_PIO1: t->pa = 10; t->pb = 24; t->mb = 7; t->mc = 15; break;
1416 case ATA_PIO2: t->pa = 6; t->pb = 16; t->mb = 7; t->mc = 15; break;
1417 case ATA_PIO3: t->pa = 4; t->pb = 12; t->mb = 7; t->mc = 15; break;
1418 case ATA_PIO4: t->pa = 2; t->pb = 8; t->mb = 7; t->mc = 15; break;
1419 case ATA_WDMA2: t->pa = 6; t->pb = 14; t->mb = 6; t->mc = 6; break;
1420 case ATA_UDMA2: t->pa = 6; t->pb = 14; t->mb = 2; t->mc = 2; break;
1421 case ATA_UDMA4: t->pa = 3; t->pb = 7; t->mb = 1; t->mc = 1; break;
1422 case ATA_UDMA5: t->pa = 3; t->pb = 7; t->mb = 1; t->mc = 1; break;
1423 }
1424 break;
1425 }
1426 pci_write_config(device_get_parent(atadev->channel->dev),
1427 0x60 + (devno << 2), timing, 4);
1428}
1429
1430static void
1431hpt_timing(struct ata_device *atadev, int devno, int mode)
1432{
1433 device_t parent = device_get_parent(atadev->channel->dev);
1434 u_int32_t chiptype = atadev->channel->chiptype;
1435 int chiprev = pci_get_revid(parent);
1436 u_int32_t timing;
1437
1438 if (chiptype == 0x00081103 && chiprev >= 0x07) {
1439 switch (mode) { /* HPT374 */
1440 case ATA_PIO0: timing = 0x0ac1f48a; break;
1441 case ATA_PIO1: timing = 0x0ac1f465; break;
1442 case ATA_PIO2: timing = 0x0a81f454; break;
1443 case ATA_PIO3: timing = 0x0a81f443; break;
1444 case ATA_PIO4: timing = 0x0a81f442; break;
1445 case ATA_WDMA2: timing = 0x22808242; break;
1446 case ATA_UDMA2: timing = 0x120c8242; break;
1447 case ATA_UDMA4: timing = 0x12ac8242; break;
1448 case ATA_UDMA5: timing = 0x12848242; break;
1449 case ATA_UDMA6: timing = 0x12808242; break;
1450 default: timing = 0x0d029d5e;
1451 }
1452 }
1453 else if ((chiptype == 0x00041103 && chiprev >= 0x05) ||
1454 (chiptype == 0x00051103 && chiprev >= 0x01)) {
1455 switch (mode) { /* HPT372 */
1456 case ATA_PIO0: timing = 0x0d029d5e; break;
1457 case ATA_PIO1: timing = 0x0d029d26; break;
1458 case ATA_PIO2: timing = 0x0c829ca6; break;
1459 case ATA_PIO3: timing = 0x0c829c84; break;
1460 case ATA_PIO4: timing = 0x0c829c62; break;
1461 case ATA_WDMA2: timing = 0x2c829262; break;
1462 case ATA_UDMA2: timing = 0x1c91dc62; break;
1463 case ATA_UDMA4: timing = 0x1c8ddc62; break;
1464 case ATA_UDMA5: timing = 0x1c6ddc62; break;
1465 case ATA_UDMA6: timing = 0x1c81dc62; break;
1466 default: timing = 0x0d029d5e;
1467 }
1468 }
1469 else if (chiptype == 0x00041103 && chiprev >= 0x03) {
1470 switch (mode) { /* HPT370 */
1471 case ATA_PIO0: timing = 0x06914e57; break;
1472 case ATA_PIO1: timing = 0x06914e43; break;
1473 case ATA_PIO2: timing = 0x06514e33; break;
1474 case ATA_PIO3: timing = 0x06514e22; break;
1475 case ATA_PIO4: timing = 0x06514e21; break;
1476 case ATA_WDMA2: timing = 0x26514e21; break;
1477 case ATA_UDMA2: timing = 0x16494e31; break;
1478 case ATA_UDMA4: timing = 0x16454e31; break;
1479 case ATA_UDMA5: timing = 0x16454e31; break;
1480 default: timing = 0x06514e57;
1481 }
1482 pci_write_config(parent, 0x40 + (devno << 2) , timing, 4);
1483 }
1484 else { /* HPT36[68] */
1485 switch (pci_read_config(parent, 0x41 + (devno << 2), 1)) {
1486 case 0x85: /* 25Mhz */
1487 switch (mode) {
1488 case ATA_PIO0: timing = 0x40d08585; break;
1489 case ATA_PIO1: timing = 0x40d08572; break;
1490 case ATA_PIO2: timing = 0x40ca8542; break;
1491 case ATA_PIO3: timing = 0x40ca8532; break;
1492 case ATA_PIO4: timing = 0x40ca8521; break;
1493 case ATA_WDMA2: timing = 0x20ca8521; break;
1494 case ATA_UDMA2: timing = 0x10cf8521; break;
1495 case ATA_UDMA4: timing = 0x10c98521; break;
1496 default: timing = 0x01208585;
1497 }
1498 break;
1499 default:
1500 case 0xa7: /* 33MHz */
1501 switch (mode) {
1502 case ATA_PIO0: timing = 0x40d0a7aa; break;
1503 case ATA_PIO1: timing = 0x40d0a7a3; break;
1504 case ATA_PIO2: timing = 0x40d0a753; break;
1505 case ATA_PIO3: timing = 0x40c8a742; break;
1506 case ATA_PIO4: timing = 0x40c8a731; break;
1507 case ATA_WDMA2: timing = 0x20c8a731; break;
1508 case ATA_UDMA2: timing = 0x10caa731; break;
1509 case ATA_UDMA4: timing = 0x10c9a731; break;
1510 default: timing = 0x0120a7a7;
1511 }
1512 break;
1513 case 0xd9: /* 40Mhz */
1514 switch (mode) {
1515 case ATA_PIO0: timing = 0x4018d9d9; break;
1516 case ATA_PIO1: timing = 0x4010d9c7; break;
1517 case ATA_PIO2: timing = 0x4010d997; break;
1518 case ATA_PIO3: timing = 0x4010d974; break;
1519 case ATA_PIO4: timing = 0x4008d963; break;
1520 case ATA_WDMA2: timing = 0x2008d943; break;
1521 case ATA_UDMA2: timing = 0x100bd943; break;
1522 case ATA_UDMA4: timing = 0x100fd943; break;
1523 default: timing = 0x0120d9d9;
1524 }
1525 }
1526 }
1527 pci_write_config(parent, 0x40 + (devno << 2) , timing, 4);
1528}
1529
1530static int
1531hpt_cable80(struct ata_device *atadev)
1532{
1533 device_t parent = device_get_parent(atadev->channel->dev);
1534 u_int8_t reg, val, res;
1535
1536 if (atadev->channel->chiptype==0x00081103 && pci_get_function(parent)==1) {
1537 reg = atadev->channel->unit ? 0x57 : 0x53;
1538 val = pci_read_config(parent, reg, 1);
1539 pci_write_config(parent, reg, val | 0x80, 1);
1540 }
1541 else {
1542 reg = 0x5b;
1543 val = pci_read_config(parent, reg, 1);
1544 pci_write_config(parent, reg, val & 0xfe, 1);
1545 }
1546 res = pci_read_config(parent, 0x5a, 1) & (atadev->channel->unit ? 0x1:0x2);
1547 pci_write_config(parent, reg, val, 1);
1548 return !res;
1549}
2 * Copyright (c) 1998,1999,2000,2001,2002 S�ren Schmidt <sos@FreeBSD.org>
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 * 1. Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer,
10 * without modification, immediately at the beginning of the file.
11 * 2. Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
14 * 3. The name of the author may not be used to endorse or promote products
15 * derived from this software without specific prior written permission.
16 *
17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
19 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
20 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
21 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
22 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
26 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
27 *
28 * $FreeBSD: head/sys/dev/ata/ata-dma.c 94037 2002-04-07 07:53:34Z sos $
29 */
30
31#include <sys/param.h>
32#include <sys/systm.h>
33#include <sys/ata.h>
34#include <sys/bio.h>
35#include <sys/malloc.h>
36#include <sys/bus.h>
37#include <sys/disk.h>
38#include <sys/devicestat.h>
39#include <pci/pcivar.h>
40#include <machine/bus.h>
41#include <sys/rman.h>
42#include <dev/ata/ata-all.h>
43
44/* prototypes */
45static void ata_dmacreate(struct ata_device *, int, int);
46static void ata_dmasetupd_cb(void *, bus_dma_segment_t *, int, int);
47static void ata_dmasetupc_cb(void *, bus_dma_segment_t *, int, int);
48static void cyrix_timing(struct ata_device *, int, int);
49static void promise_timing(struct ata_device *, int, int);
50static void hpt_timing(struct ata_device *, int, int);
51static int hpt_cable80(struct ata_device *);
52
53/* misc defines */
54#define ATAPI_DEVICE(atadev) \
55 ((atadev->unit == ATA_MASTER && \
56 atadev->channel->devices & ATA_ATAPI_MASTER) || \
57 (atadev->unit == ATA_SLAVE && \
58 atadev->channel->devices & ATA_ATAPI_SLAVE))
59
60#define MAXSEGSZ PAGE_SIZE
61#define MAXTABSZ PAGE_SIZE
62#define MAXCTLDMASZ (2 * (MAXTABSZ + MAXPHYS))
63
64struct ata_dc_cb_args {
65 bus_addr_t maddr;
66 int error;
67};
68
69static void
70ata_dmasetupc_cb(void *xsc, bus_dma_segment_t *segs, int nsegs, int error)
71{
72 struct ata_dc_cb_args *cba = (struct ata_dc_cb_args *)xsc;
73
74 if (!(cba->error = error))
75 cba->maddr = segs[0].ds_addr;
76}
77
78int
79ata_dmaalloc(struct ata_device *atadev)
80{
81 struct ata_channel *ch;
82 struct ata_dc_cb_args ccba;
83 struct ata_dmastate *ds;
84 int error;
85
86 ch = atadev->channel;
87 ds = &atadev->dmastate;
88 if (!ds->cdmatag) {
89 if ((error = bus_dma_tag_create(ch->dmatag, 1, PAGE_SIZE,
90 BUS_SPACE_MAXADDR_32BIT,
91 BUS_SPACE_MAXADDR, NULL, NULL,
92 MAXTABSZ, 1, MAXTABSZ,
93 BUS_DMA_ALLOCNOW, &ds->cdmatag)))
94 return error;
95 }
96 if (!ds->ddmatag) {
97 if ((error = bus_dma_tag_create(ch->dmatag, ch->alignment + 1, 0,
98 BUS_SPACE_MAXADDR_32BIT,
99 BUS_SPACE_MAXADDR, NULL, NULL,
100 MAXPHYS, ATA_DMA_ENTRIES, MAXSEGSZ,
101 BUS_DMA_ALLOCNOW, &ds->ddmatag)))
102 return error;
103 }
104 if (!ds->mdmatab) {
105 if ((error = bus_dmamem_alloc(ds->cdmatag, (void **)&ds->dmatab, 0,
106 &ds->cdmamap)))
107 return error;
108
109 if ((error = bus_dmamap_load(ds->cdmatag, ds->cdmamap, ds->dmatab,
110 MAXTABSZ, ata_dmasetupc_cb, &ccba,
111 0)) != 0 || ccba.error != 0) {
112 bus_dmamem_free(ds->cdmatag, ds->dmatab, ds->cdmamap);
113 return error;
114 }
115 ds->mdmatab = ccba.maddr;
116 }
117 if (!ds->ddmamap) {
118 if ((error = bus_dmamap_create(ds->ddmatag, 0, &ds->ddmamap)) != 0)
119 return error;
120 }
121 return 0;
122}
123
124void
125ata_dmafree(struct ata_device *atadev)
126{
127 struct ata_dmastate *ds;
128
129 ds = &atadev->dmastate;
130 if (ds->mdmatab) {
131 bus_dmamap_unload(ds->cdmatag, ds->cdmamap);
132 bus_dmamem_free(ds->cdmatag, ds->dmatab, ds->cdmamap);
133 ds->mdmatab = 0;
134 ds->cdmamap = NULL;
135 ds->dmatab = NULL;
136 }
137 if (ds->ddmamap) {
138 bus_dmamap_destroy(ds->ddmatag, ds->ddmamap);
139 ds->ddmamap = NULL;
140 }
141 if (ds->cdmatag) {
142 bus_dma_tag_destroy(ds->cdmatag);
143 ds->cdmatag = NULL;
144 }
145 if (ds->ddmatag) {
146 bus_dma_tag_destroy(ds->ddmatag);
147 ds->ddmatag = NULL;
148 }
149}
150
151void
152ata_dmafreetags(struct ata_channel *ch)
153{
154
155 if (ch->dmatag) {
156 bus_dma_tag_destroy(ch->dmatag);
157 ch->dmatag = NULL;
158 }
159}
160
161static void
162ata_dmacreate(struct ata_device *atadev, int apiomode, int mode)
163{
164
165 atadev->mode = mode;
166 if (!atadev->channel->dmatag) {
167 if (bus_dma_tag_create(NULL, 1, 0,
168 BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR,
169 NULL, NULL, MAXCTLDMASZ, ATA_DMA_ENTRIES,
170 BUS_SPACE_MAXSIZE_32BIT, 0,
171 &atadev->channel->dmatag)) {
172 ata_prtdev(atadev, "DMA tag allocation failed, disabling DMA\n");
173 ata_dmainit(atadev, apiomode, -1, -1);
174 }
175 }
176}
177
178void
179ata_dmainit(struct ata_device *atadev, int apiomode, int wdmamode, int udmamode)
180{
181 device_t parent = device_get_parent(atadev->channel->dev);
182 int chiptype = atadev->channel->chiptype;
183 int chiprev = pci_get_revid(parent);
184 int channel = atadev->channel->unit;
185 int device = ATA_DEV(atadev->unit);
186 int devno = (channel << 1) + device;
187 int error;
188
189 /* set our most pessimistic default mode */
190 atadev->mode = ATA_PIO;
191
192 if (!atadev->channel->r_bmio)
193 return;
194
195 /* if simplex controller, only allow DMA on primary channel */
196 if (channel == 1) {
197 ATA_OUTB(atadev->channel->r_bmio, ATA_BMSTAT_PORT,
198 ATA_INB(atadev->channel->r_bmio, ATA_BMSTAT_PORT) &
199 (ATA_BMSTAT_DMA_MASTER | ATA_BMSTAT_DMA_SLAVE));
200 if (ATA_INB(atadev->channel->r_bmio, ATA_BMSTAT_PORT) &
201 ATA_BMSTAT_DMA_SIMPLEX) {
202 ata_prtdev(atadev, "simplex device, DMA on primary only\n");
203 return;
204 }
205 }
206
207 /* DMA engine address alignment is usually 1 word (2 bytes) */
208 atadev->channel->alignment = 0x1;
209
210#if 1
211 if (udmamode > 2 && !atadev->param->hwres_cblid) {
212 ata_prtdev(atadev,"DMA limited to UDMA33, non-ATA66 cable or device\n");
213 udmamode = 2;
214 }
215#endif
216 switch (chiptype) {
217
218 case 0x248a8086: /* Intel ICH3 mobile */
219 case 0x248b8086: /* Intel ICH3 */
220 case 0x244a8086: /* Intel ICH2 mobile */
221 case 0x244b8086: /* Intel ICH2 */
222 if (udmamode >= 5) {
223 int32_t mask48, new48;
224 int16_t word54;
225
226 word54 = pci_read_config(parent, 0x54, 2);
227 if (word54 & (0x10 << devno)) {
228 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
229 ATA_UDMA5, ATA_C_F_SETXFER,ATA_WAIT_READY);
230 if (bootverbose)
231 ata_prtdev(atadev, "%s setting UDMA5 on Intel chip\n",
232 (error) ? "failed" : "success");
233 if (!error) {
234 mask48 = (1 << devno) + (3 << (16 + (devno << 2)));
235 new48 = (1 << devno) + (1 << (16 + (devno << 2)));
236 pci_write_config(parent, 0x48,
237 (pci_read_config(parent, 0x48, 4) &
238 ~mask48) | new48, 4);
239 pci_write_config(parent, 0x54, word54 | (0x1000<<devno), 2);
240 ata_dmacreate(atadev, apiomode, ATA_UDMA5);
241 return;
242 }
243 }
244 }
245 /* make sure eventual ATA100 mode from the BIOS is disabled */
246 pci_write_config(parent, 0x54,
247 pci_read_config(parent, 0x54, 2) & ~(0x1000<<devno),2);
248 /* FALLTHROUGH */
249
250 case 0x24118086: /* Intel ICH */
251 case 0x76018086: /* Intel ICH */
252 if (udmamode >= 4) {
253 int32_t mask48, new48;
254 int16_t word54;
255
256 word54 = pci_read_config(parent, 0x54, 2);
257 if (word54 & (0x10 << devno)) {
258 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
259 ATA_UDMA4, ATA_C_F_SETXFER, ATA_WAIT_READY);
260 if (bootverbose)
261 ata_prtdev(atadev, "%s setting UDMA4 on Intel chip\n",
262 (error) ? "failed" : "success");
263 if (!error) {
264 mask48 = (1 << devno) + (3 << (16 + (devno << 2)));
265 new48 = (1 << devno) + (2 << (16 + (devno << 2)));
266 pci_write_config(parent, 0x48,
267 (pci_read_config(parent, 0x48, 4) &
268 ~mask48) | new48, 4);
269 pci_write_config(parent, 0x54, word54 | (1 << devno), 2);
270 ata_dmacreate(atadev, apiomode, ATA_UDMA4);
271 return;
272 }
273 }
274 }
275 /* make sure eventual ATA66 mode from the BIOS is disabled */
276 pci_write_config(parent, 0x54,
277 pci_read_config(parent, 0x54, 2) & ~(1 << devno), 2);
278 /* FALLTHROUGH */
279
280 case 0x71118086: /* Intel PIIX4 */
281 case 0x84CA8086: /* Intel PIIX4 */
282 case 0x71998086: /* Intel PIIX4e */
283 case 0x24218086: /* Intel ICH0 */
284 if (udmamode >= 2) {
285 int32_t mask48, new48;
286
287 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
288 ATA_UDMA2, ATA_C_F_SETXFER, ATA_WAIT_READY);
289 if (bootverbose)
290 ata_prtdev(atadev, "%s setting UDMA2 on Intel chip\n",
291 (error) ? "failed" : "success");
292 if (!error) {
293 mask48 = (1 << devno) + (3 << (16 + (devno << 2)));
294 new48 = (1 << devno) + (2 << (16 + (devno << 2)));
295 pci_write_config(parent, 0x48,
296 (pci_read_config(parent, 0x48, 4) &
297 ~mask48) | new48, 4);
298 ata_dmacreate(atadev, apiomode, ATA_UDMA2);
299 return;
300 }
301 }
302 /* make sure eventual ATA33 mode from the BIOS is disabled */
303 pci_write_config(parent, 0x48,
304 pci_read_config(parent, 0x48, 4) & ~(1 << devno), 4);
305 /* FALLTHROUGH */
306
307 case 0x70108086: /* Intel PIIX3 */
308 if (wdmamode >= 2 && apiomode >= 4) {
309 int32_t mask40, new40, mask44, new44;
310
311 /* if SITRE not set doit for both channels */
312 if (!((pci_read_config(parent, 0x40, 4) >> (channel<<8)) & 0x4000)){
313 new40 = pci_read_config(parent, 0x40, 4);
314 new44 = pci_read_config(parent, 0x44, 4);
315 if (!(new40 & 0x00004000)) {
316 new44 &= ~0x0000000f;
317 new44 |= ((new40&0x00003000)>>10)|((new40&0x00000300)>>8);
318 }
319 if (!(new40 & 0x40000000)) {
320 new44 &= ~0x000000f0;
321 new44 |= ((new40&0x30000000)>>22)|((new40&0x03000000)>>20);
322 }
323 new40 |= 0x40004000;
324 pci_write_config(parent, 0x40, new40, 4);
325 pci_write_config(parent, 0x44, new44, 4);
326 }
327 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
328 ATA_WDMA2, ATA_C_F_SETXFER, ATA_WAIT_READY);
329 if (bootverbose)
330 ata_prtdev(atadev, "%s setting WDMA2 on Intel chip\n",
331 (error) ? "failed" : "success");
332 if (!error) {
333 if (device == ATA_MASTER) {
334 mask40 = 0x0000330f;
335 new40 = 0x00002307;
336 mask44 = 0;
337 new44 = 0;
338 }
339 else {
340 mask40 = 0x000000f0;
341 new40 = 0x00000070;
342 mask44 = 0x0000000f;
343 new44 = 0x0000000b;
344 }
345 if (channel) {
346 mask40 <<= 16;
347 new40 <<= 16;
348 mask44 <<= 4;
349 new44 <<= 4;
350 }
351 pci_write_config(parent, 0x40,
352 (pci_read_config(parent, 0x40, 4) & ~mask40)|
353 new40, 4);
354 pci_write_config(parent, 0x44,
355 (pci_read_config(parent, 0x44, 4) & ~mask44)|
356 new44, 4);
357 ata_dmacreate(atadev, apiomode, ATA_WDMA2);
358 return;
359 }
360 }
361 /* we could set PIO mode timings, but we assume the BIOS did that */
362 break;
363
364 case 0x12308086: /* Intel PIIX */
365 if (wdmamode >= 2 && apiomode >= 4) {
366 int32_t word40;
367
368 word40 = pci_read_config(parent, 0x40, 4);
369 word40 >>= channel * 16;
370
371 /* Check for timing config usable for DMA on controller */
372 if (!((word40 & 0x3300) == 0x2300 &&
373 ((word40 >> (device ? 4 : 0)) & 1) == 1))
374 break;
375
376 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
377 ATA_WDMA2, ATA_C_F_SETXFER, ATA_WAIT_READY);
378 if (bootverbose)
379 ata_prtdev(atadev, "%s setting WDMA2 on Intel chip\n",
380 (error) ? "failed" : "success");
381 if (!error) {
382 ata_dmacreate(atadev, apiomode, ATA_WDMA2);
383 return;
384 }
385 }
386 break;
387
388 case 0x522910b9: /* AcerLabs Aladdin IV/V */
389 /* the older Aladdin doesn't support ATAPI DMA on both master & slave */
390 if (chiprev < 0xc2 &&
391 atadev->channel->devices & ATA_ATAPI_MASTER &&
392 atadev->channel->devices & ATA_ATAPI_SLAVE) {
393 ata_prtdev(atadev, "two atapi devices on this channel, no DMA\n");
394 break;
395 }
396 pci_write_config(parent, 0x58 + (channel << 2), 0x00310001, 4);
397 if (udmamode >= 5 && chiprev >= 0xc4) {
398 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
399 ATA_UDMA5, ATA_C_F_SETXFER, ATA_WAIT_READY);
400 if (bootverbose)
401 ata_prtdev(atadev, "%s setting UDMA5 on Acer chip\n",
402 (error) ? "failed" : "success");
403 if (!error) {
404 int32_t word54 = pci_read_config(parent, 0x54, 4);
405
406 pci_write_config(parent, 0x4b,
407 pci_read_config(parent, 0x4b, 1) | 0x01, 1);
408 word54 &= ~(0x000f000f << (devno << 2));
409 word54 |= (0x000f0005 << (devno << 2));
410 pci_write_config(parent, 0x54, word54, 4);
411 pci_write_config(parent, 0x53,
412 pci_read_config(parent, 0x53, 1) | 0x03, 1);
413 ata_dmacreate(atadev, apiomode, ATA_UDMA5);
414 return;
415 }
416 }
417 if (udmamode >= 4 && chiprev >= 0xc2) {
418 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
419 ATA_UDMA4, ATA_C_F_SETXFER, ATA_WAIT_READY);
420 if (bootverbose)
421 ata_prtdev(atadev, "%s setting UDMA4 on Acer chip\n",
422 (error) ? "failed" : "success");
423 if (!error) {
424 int32_t word54 = pci_read_config(parent, 0x54, 4);
425
426 pci_write_config(parent, 0x4b,
427 pci_read_config(parent, 0x4b, 1) | 0x01, 1);
428 word54 &= ~(0x000f000f << (devno << 2));
429 word54 |= (0x00080005 << (devno << 2));
430 pci_write_config(parent, 0x54, word54, 4);
431 pci_write_config(parent, 0x53,
432 pci_read_config(parent, 0x53, 1) | 0x03, 1);
433 ata_dmacreate(atadev, apiomode, ATA_UDMA4);
434 return;
435 }
436 }
437 if (udmamode >= 2 && chiprev >= 0x20) {
438 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
439 ATA_UDMA2, ATA_C_F_SETXFER, ATA_WAIT_READY);
440 if (bootverbose)
441 ata_prtdev(atadev, "%s setting UDMA2 on Acer chip\n",
442 (error) ? "failed" : "success");
443 if (!error) {
444 int32_t word54 = pci_read_config(parent, 0x54, 4);
445
446 word54 &= ~(0x000f000f << (devno << 2));
447 word54 |= (0x000a0005 << (devno << 2));
448 pci_write_config(parent, 0x54, word54, 4);
449 pci_write_config(parent, 0x53,
450 pci_read_config(parent, 0x53, 1) | 0x03, 1);
451 atadev->channel->flags |= ATA_ATAPI_DMA_RO;
452 ata_dmacreate(atadev, apiomode, ATA_UDMA2);
453 return;
454 }
455 }
456
457 /* make sure eventual UDMA mode from the BIOS is disabled */
458 pci_write_config(parent, 0x56, pci_read_config(parent, 0x56, 2) &
459 ~(0x0008 << (devno << 2)), 2);
460
461 if (wdmamode >= 2 && apiomode >= 4) {
462 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
463 ATA_WDMA2, ATA_C_F_SETXFER, ATA_WAIT_READY);
464 if (bootverbose)
465 ata_prtdev(atadev, "%s setting WDMA2 on Acer chip\n",
466 (error) ? "failed" : "success");
467 if (!error) {
468 pci_write_config(parent, 0x53,
469 pci_read_config(parent, 0x53, 1) | 0x03, 1);
470 atadev->channel->flags |= ATA_ATAPI_DMA_RO;
471 ata_dmacreate(atadev, apiomode, ATA_WDMA2);
472 return;
473 }
474 }
475 pci_write_config(parent, 0x53,
476 (pci_read_config(parent, 0x53, 1) & ~0x01) | 0x02, 1);
477 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
478 ATA_PIO0 + apiomode,
479 ATA_C_F_SETXFER, ATA_WAIT_READY);
480 if (bootverbose)
481 ata_prtdev(atadev, "%s setting PIO%d on Acer chip\n",
482 (error) ? "failed" : "success",
483 (apiomode >= 0) ? apiomode : 0);
484 if (!error) {
485 int32_t word54 = pci_read_config(parent, 0x54, 4);
486 int32_t timing;
487
488 switch(ATA_PIO0 + apiomode) {
489 case ATA_PIO0: timing = 0x006d0003;
490 case ATA_PIO1: timing = 0x00580002;
491 case ATA_PIO2: timing = 0x00440001;
492 case ATA_PIO3: timing = 0x00330001;
493 case ATA_PIO4: timing = 0x00310001;
494 default: timing = 0x006d0003;
495 }
496 pci_write_config(parent, 0x58 + (channel << 2), timing, 4);
497 word54 &= ~(0x000f000f << (devno << 2));
498 word54 |= (0x00000004 << (devno << 2));
499 pci_write_config(parent, 0x54, word54, 4);
500 atadev->mode = ATA_PIO0 + apiomode;
501 return;
502 }
503 break;
504
505 case 0x74411022: /* AMD 768 */
506 case 0x74111022: /* AMD 766 */
507 if (udmamode >= 5) {
508 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
509 ATA_UDMA5, ATA_C_F_SETXFER, ATA_WAIT_READY);
510 if (bootverbose)
511 ata_prtdev(atadev, "%s setting UDMA5 on AMD chip\n",
512 (error) ? "failed" : "success");
513 if (!error) {
514 pci_write_config(parent, 0x53 - devno, 0xc6, 1);
515 ata_dmacreate(atadev, apiomode, ATA_UDMA5);
516 return;
517 }
518 }
519 /* FALLTHROUGH */
520
521 case 0x74091022: /* AMD 756 */
522 if (udmamode >= 4) {
523 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
524 ATA_UDMA4, ATA_C_F_SETXFER, ATA_WAIT_READY);
525 if (bootverbose)
526 ata_prtdev(atadev, "%s setting UDMA4 on AMD chip\n",
527 (error) ? "failed" : "success");
528 if (!error) {
529 pci_write_config(parent, 0x53 - devno, 0xc5, 1);
530 ata_dmacreate(atadev, apiomode, ATA_UDMA4);
531 return;
532 }
533 }
534 goto via_82c586;
535
536 case 0x05711106: /* VIA 82C571, 82C586, 82C596, 82C686 , 8231, 8233 */
537 {
538 int via_modes[4][7] = {
539 { 0x00, 0x00, 0xc0, 0x00, 0x00, 0x00, 0x00 }, /* ATA33 */
540 { 0x00, 0x00, 0xea, 0x00, 0xe8, 0x00, 0x00 }, /* ATA66 */
541 { 0x00, 0x00, 0xf4, 0x00, 0xf1, 0xf0, 0x00 }, /* ATA100 */
542 { 0x00, 0x00, 0xf6, 0x00, 0xf2, 0xf1, 0xf0 }}; /* ATA133 */
543 int *reg_val = NULL;
544
545 if (ata_find_dev(parent, 0x31471106, 0)) { /* 8233a */
546 udmamode = imin(udmamode, 6);
547 reg_val = via_modes[3];
548 }
549 else if (ata_find_dev(parent, 0x06861106, 0x40) || /* 82C686b */
550 ata_find_dev(parent, 0x82311106, 0) || /* 8231 */
551 ata_find_dev(parent, 0x30741106, 0) || /* 8233 */
552 ata_find_dev(parent, 0x31091106, 0)) { /* 8233c */
553 udmamode = imin(udmamode, 5);
554 reg_val = via_modes[2];
555 }
556 else if (ata_find_dev(parent, 0x06861106, 0x10) || /* 82C686a */
557 ata_find_dev(parent, 0x05961106, 0x12)) { /* 82C596b */
558 udmamode = imin(udmamode, 4);
559 reg_val = via_modes[1];
560 }
561 else if (ata_find_dev(parent, 0x06861106, 0)) { /* 82C686 */
562 udmamode = imin(udmamode, 2);
563 reg_val = via_modes[1];
564 }
565 else if (ata_find_dev(parent, 0x05961106, 0) || /* 82C596a */
566 ata_find_dev(parent, 0x05861106, 0x03)) { /* 82C586b */
567via_82c586:
568 udmamode = imin(udmamode, 2);
569 reg_val = via_modes[0];
570 }
571 else
572 udmamode = 0;
573
574 if (udmamode >= 6) {
575 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
576 ATA_UDMA6, ATA_C_F_SETXFER, ATA_WAIT_READY);
577 if (bootverbose)
578 ata_prtdev(atadev, "%s setting UDMA6 on VIA chip\n",
579 (error) ? "failed" : "success");
580 if (!error) {
581 pci_write_config(parent, 0x53 - devno, reg_val[6], 1);
582 ata_dmacreate(atadev, apiomode, ATA_UDMA6);
583 return;
584 }
585 }
586 if (udmamode >= 5) {
587 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
588 ATA_UDMA5, ATA_C_F_SETXFER, ATA_WAIT_READY);
589 if (bootverbose)
590 ata_prtdev(atadev, "%s setting UDMA5 on VIA chip\n",
591 (error) ? "failed" : "success");
592 if (!error) {
593 pci_write_config(parent, 0x53 - devno, reg_val[5], 1);
594 ata_dmacreate(atadev, apiomode, ATA_UDMA5);
595 return;
596 }
597 }
598 if (udmamode >= 4) {
599 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
600 ATA_UDMA4, ATA_C_F_SETXFER, ATA_WAIT_READY);
601 if (bootverbose)
602 ata_prtdev(atadev, "%s setting UDMA4 on VIA chip\n",
603 (error) ? "failed" : "success");
604 if (!error) {
605 pci_write_config(parent, 0x53 - devno, reg_val[4], 1);
606 ata_dmacreate(atadev, apiomode, ATA_UDMA4);
607 return;
608 }
609 }
610 if (udmamode >= 2) {
611 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
612 ATA_UDMA2, ATA_C_F_SETXFER, ATA_WAIT_READY);
613 if (bootverbose)
614 ata_prtdev(atadev, "%s setting UDMA2 on VIA chip\n",
615 (error) ? "failed" : "success");
616 if (!error) {
617 pci_write_config(parent, 0x53 - devno, reg_val[2], 1);
618 ata_dmacreate(atadev, apiomode, ATA_UDMA2);
619 return;
620 }
621 }
622
623 }
624 if (wdmamode >= 2 && apiomode >= 4) {
625 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
626 ATA_WDMA2, ATA_C_F_SETXFER, ATA_WAIT_READY);
627 if (bootverbose)
628 ata_prtdev(atadev, "%s setting WDMA2 on %s chip\n",
629 (error) ? "failed" : "success",
630 (chiptype == 0x74091022) ? "AMD" : "VIA");
631 if (!error) {
632 pci_write_config(parent, 0x53 - devno, 0x0b, 1);
633 pci_write_config(parent, 0x4b - devno, 0x31, 1);
634 ata_dmacreate(atadev, apiomode, ATA_WDMA2);
635 return;
636 }
637 }
638 /* we could set PIO mode timings, but we assume the BIOS did that */
639 break;
640
641 case 0x55131039: /* SiS 5591 */
642 if (ata_find_dev(parent, 0x06301039, 0x30) || /* SiS 630 */
643 ata_find_dev(parent, 0x06331039, 0) || /* SiS 633 */
644 ata_find_dev(parent, 0x06351039, 0) || /* SiS 635 */
645 ata_find_dev(parent, 0x06401039, 0) || /* SiS 640 */
646 ata_find_dev(parent, 0x06451039, 0) || /* SiS 645 */
647 ata_find_dev(parent, 0x06501039, 0) || /* SiS 650 */
648 ata_find_dev(parent, 0x07301039, 0) || /* SiS 730 */
649 ata_find_dev(parent, 0x07331039, 0) || /* SiS 733 */
650 ata_find_dev(parent, 0x07351039, 0) || /* SiS 735 */
651 ata_find_dev(parent, 0x07401039, 0) || /* SiS 740 */
652 ata_find_dev(parent, 0x07451039, 0) || /* SiS 745 */
653 ata_find_dev(parent, 0x07501039, 0)) { /* SiS 750 */
654 int8_t reg = 0x40 + (devno << 1);
655 int16_t val = pci_read_config(parent, reg, 2) & 0x0fff;
656
657 if (udmamode >= 5) {
658 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
659 ATA_UDMA5, ATA_C_F_SETXFER, ATA_WAIT_READY);
660 if (bootverbose)
661 ata_prtdev(atadev, "%s setting UDMA5 on SiS chip\n",
662 (error) ? "failed" : "success");
663 if (!error) {
664 pci_write_config(parent, reg, val | 0x8000, 2);
665 ata_dmacreate(atadev, apiomode, ATA_UDMA5);
666 return;
667 }
668 }
669 if (udmamode >= 4) {
670 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
671 ATA_UDMA4, ATA_C_F_SETXFER, ATA_WAIT_READY);
672 if (bootverbose)
673 ata_prtdev(atadev, "%s setting UDMA4 on SiS chip\n",
674 (error) ? "failed" : "success");
675 if (!error) {
676 pci_write_config(parent, reg, val | 0x9000, 2);
677 ata_dmacreate(atadev, apiomode, ATA_UDMA4);
678 return;
679 }
680 }
681 if (udmamode >= 2) {
682 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
683 ATA_UDMA2, ATA_C_F_SETXFER, ATA_WAIT_READY);
684 if (bootverbose)
685 ata_prtdev(atadev, "%s setting UDMA2 on SiS chip\n",
686 (error) ? "failed" : "success");
687 if (!error) {
688 pci_write_config(parent, reg, val | 0xb000, 2);
689 ata_dmacreate(atadev, apiomode, ATA_UDMA2);
690 return;
691 }
692 }
693 } else if (ata_find_dev(parent, 0x05301039, 0) || /* SiS 530 */
694 ata_find_dev(parent, 0x05401039, 0) || /* SiS 540 */
695 ata_find_dev(parent, 0x06201039, 0) || /* SiS 620 */
696 ata_find_dev(parent, 0x06301039, 0)) { /* SiS 630 */
697 int8_t reg = 0x40 + (devno << 1);
698 int16_t val = pci_read_config(parent, reg, 2) & 0x0fff;
699
700 if (udmamode >= 4) {
701 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
702 ATA_UDMA4, ATA_C_F_SETXFER, ATA_WAIT_READY);
703 if (bootverbose)
704 ata_prtdev(atadev, "%s setting UDMA4 on SiS chip\n",
705 (error) ? "failed" : "success");
706 if (!error) {
707 pci_write_config(parent, reg, val | 0x9000, 2);
708 ata_dmacreate(atadev, apiomode, ATA_UDMA4);
709 return;
710 }
711 }
712 if (udmamode >= 2) {
713 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
714 ATA_UDMA2, ATA_C_F_SETXFER, ATA_WAIT_READY);
715 if (bootverbose)
716 ata_prtdev(atadev, "%s setting UDMA2 on SiS chip\n",
717 (error) ? "failed" : "success");
718 if (!error) {
719 pci_write_config(parent, reg, val | 0xa000, 2);
720 ata_dmacreate(atadev, apiomode, ATA_UDMA2);
721 return;
722 }
723 }
724 } else if (udmamode >= 2 && chiprev > 0xc1) {
725 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
726 ATA_UDMA2, ATA_C_F_SETXFER, ATA_WAIT_READY);
727 if (bootverbose)
728 ata_prtdev(atadev, "%s setting UDMA2 on SiS chip\n",
729 (error) ? "failed" : "success");
730 if (!error) {
731 pci_write_config(parent, 0x40 + (devno << 1), 0xa301, 2);
732 ata_dmacreate(atadev, apiomode, ATA_UDMA2);
733 return;
734 }
735 }
736 if (wdmamode >=2 && apiomode >= 4) {
737 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
738 ATA_WDMA2, ATA_C_F_SETXFER, ATA_WAIT_READY);
739 if (bootverbose)
740 ata_prtdev(atadev, "%s setting WDMA2 on SiS chip\n",
741 (error) ? "failed" : "success");
742 if (!error) {
743 pci_write_config(parent, 0x40 + (devno << 1), 0x0301, 2);
744 ata_dmacreate(atadev, apiomode, ATA_WDMA2);
745 return;
746 }
747 }
748 /* we could set PIO mode timings, but we assume the BIOS did that */
749 break;
750
751 case 0x06491095: /* CMD 649 ATA100 controller */
752 if (udmamode >= 5) {
753 u_int8_t umode;
754
755 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
756 ATA_UDMA5, ATA_C_F_SETXFER, ATA_WAIT_READY);
757 if (bootverbose)
758 ata_prtdev(atadev, "%s setting UDMA5 on CMD chip\n",
759 (error) ? "failed" : "success");
760 if (!error) {
761 umode = pci_read_config(parent, channel ? 0x7b : 0x73, 1);
762 umode &= ~(device ? 0xca : 0x35);
763 umode |= (device ? 0x0a : 0x05);
764 pci_write_config(parent, channel ? 0x7b : 0x73, umode, 1);
765 ata_dmacreate(atadev, apiomode, ATA_UDMA5);
766 return;
767 }
768 }
769 /* FALLTHROUGH */
770
771 case 0x06481095: /* CMD 648 ATA66 controller */
772 if (udmamode >= 4) {
773 u_int8_t umode;
774
775 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
776 ATA_UDMA4, ATA_C_F_SETXFER, ATA_WAIT_READY);
777 if (bootverbose)
778 ata_prtdev(atadev, "%s setting UDMA4 on CMD chip\n",
779 (error) ? "failed" : "success");
780 if (!error) {
781 umode = pci_read_config(parent, channel ? 0x7b : 0x73, 1);
782 umode &= ~(device ? 0xca : 0x35);
783 umode |= (device ? 0x4a : 0x15);
784 pci_write_config(parent, channel ? 0x7b : 0x73, umode, 1);
785 ata_dmacreate(atadev, apiomode, ATA_UDMA4);
786 return;
787 }
788 }
789 if (udmamode >= 2) {
790 u_int8_t umode;
791
792 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
793 ATA_UDMA2, ATA_C_F_SETXFER, ATA_WAIT_READY);
794 if (bootverbose)
795 ata_prtdev(atadev, "%s setting UDMA2 on CMD chip\n",
796 (error) ? "failed" : "success");
797 if (!error) {
798 umode = pci_read_config(parent, channel ? 0x7b : 0x73, 1);
799 umode &= ~(device ? 0xca : 0x35);
800 umode |= (device ? 0x42 : 0x11);
801 pci_write_config(parent, channel ? 0x7b : 0x73, umode, 1);
802 ata_dmacreate(atadev, apiomode, ATA_UDMA2);
803 return;
804 }
805 }
806 /* make sure eventual UDMA mode from the BIOS is disabled */
807 pci_write_config(parent, channel ? 0x7b : 0x73,
808 pci_read_config(parent, channel ? 0x7b : 0x73, 1) &
809 ~(device ? 0xca : 0x53), 1);
810 /* FALLTHROUGH */
811
812 case 0x06461095: /* CMD 646 ATA controller */
813 if (wdmamode >= 2 && apiomode >= 4) {
814 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
815 ATA_WDMA2, ATA_C_F_SETXFER, ATA_WAIT_READY);
816 if (bootverbose)
817 ata_prtdev(atadev, "%s setting WDMA2 on CMD chip\n",
818 error ? "failed" : "success");
819 if (!error) {
820 int32_t offset = (devno < 3) ? (devno << 1) : 7;
821
822 pci_write_config(parent, 0x54 + offset, 0x3f, 1);
823 ata_dmacreate(atadev, apiomode, ATA_WDMA2);
824 return;
825 }
826 }
827 /* we could set PIO mode timings, but we assume the BIOS did that */
828 break;
829
830 case 0xc6931080: /* Cypress 82c693 ATA controller */
831 if (wdmamode >= 2 && apiomode >= 4) {
832 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
833 ATA_WDMA2, ATA_C_F_SETXFER, ATA_WAIT_READY);
834 if (bootverbose)
835 ata_prtdev(atadev, "%s setting WDMA2 on Cypress chip\n",
836 error ? "failed" : "success");
837 if (!error) {
838 pci_write_config(atadev->channel->dev,
839 channel ? 0x4e:0x4c, 0x2020, 2);
840 ata_dmacreate(atadev, apiomode, ATA_WDMA2);
841 return;
842 }
843 }
844 /* we could set PIO mode timings, but we assume the BIOS did that */
845 break;
846
847 case 0x01021078: /* Cyrix 5530 ATA33 controller */
848 atadev->channel->alignment = 0xf;
849 if (udmamode >= 2) {
850 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
851 ATA_UDMA2, ATA_C_F_SETXFER, ATA_WAIT_READY);
852 if (bootverbose)
853 ata_prtdev(atadev, "%s setting UDMA2 on Cyrix chip\n",
854 (error) ? "failed" : "success");
855 if (!error) {
856 cyrix_timing(atadev, devno, ATA_UDMA2);
857 ata_dmacreate(atadev, apiomode, ATA_UDMA2);
858 return;
859 }
860 }
861 if (wdmamode >= 2 && apiomode >= 4) {
862 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
863 ATA_WDMA2, ATA_C_F_SETXFER, ATA_WAIT_READY);
864 if (bootverbose)
865 ata_prtdev(atadev, "%s setting WDMA2 on Cyrix chip\n",
866 (error) ? "failed" : "success");
867 if (!error) {
868 cyrix_timing(atadev, devno, ATA_WDMA2);
869 ata_dmacreate(atadev, apiomode, ATA_WDMA2);
870 return;
871 }
872 }
873 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
874 ATA_PIO0 + apiomode, ATA_C_F_SETXFER,
875 ATA_WAIT_READY);
876 if (bootverbose)
877 ata_prtdev(atadev, "%s setting %s on Cyrix chip\n",
878 (error) ? "failed" : "success",
879 ata_mode2str(ATA_PIO0 + apiomode));
880 cyrix_timing(atadev, devno, ATA_PIO0 + apiomode);
881 atadev->mode = ATA_PIO0 + apiomode;
882 return;
883
884 case 0x02121166: /* ServerWorks CSB5 ATA66/100 controller */
885 if (udmamode >= 5 && chiprev >= 0x92) {
886 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
887 ATA_UDMA5, ATA_C_F_SETXFER, ATA_WAIT_READY);
888 if (bootverbose)
889 ata_prtdev(atadev, "%s setting UDMA5 on ServerWorks chip\n",
890 (error) ? "failed" : "success");
891 if (!error) {
892 u_int16_t reg56;
893
894 pci_write_config(parent, 0x54,
895 pci_read_config(parent, 0x54, 1) |
896 (0x01 << devno), 1);
897 reg56 = pci_read_config(parent, 0x56, 2);
898 reg56 &= ~(0xf << (devno * 4));
899 reg56 |= (0x5 << (devno * 4));
900 pci_write_config(parent, 0x56, reg56, 2);
901 ata_dmacreate(atadev, apiomode, ATA_UDMA5);
902 return;
903 }
904 }
905 if (udmamode >= 4) {
906 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
907 ATA_UDMA4, ATA_C_F_SETXFER, ATA_WAIT_READY);
908 if (bootverbose)
909 ata_prtdev(atadev, "%s setting UDMA4 on ServerWorks chip\n",
910 (error) ? "failed" : "success");
911 if (!error) {
912 u_int16_t reg56;
913
914 pci_write_config(parent, 0x54,
915 pci_read_config(parent, 0x54, 1) |
916 (0x01 << devno), 1);
917 reg56 = pci_read_config(parent, 0x56, 2);
918 reg56 &= ~(0xf << (devno * 4));
919 reg56 |= (0x4 << (devno * 4));
920 pci_write_config(parent, 0x56, reg56, 2);
921 ata_dmacreate(atadev, apiomode, ATA_UDMA4);
922 return;
923 }
924 }
925 /* FALLTHROUGH */
926
927 case 0x02111166: /* ServerWorks ROSB4 ATA33 controller */
928 if (udmamode >= 2) {
929 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
930 ATA_UDMA2, ATA_C_F_SETXFER, ATA_WAIT_READY);
931 if (bootverbose)
932 ata_prtdev(atadev, "%s setting UDMA2 on ServerWorks chip\n",
933 (error) ? "failed" : "success");
934 if (!error) {
935 u_int16_t reg56;
936
937 pci_write_config(parent, 0x54,
938 pci_read_config(parent, 0x54, 1) |
939 (0x01 << devno), 1);
940 reg56 = pci_read_config(parent, 0x56, 2);
941 reg56 &= ~(0xf << (devno * 4));
942 reg56 |= (0x2 << (devno * 4));
943 pci_write_config(parent, 0x56, reg56, 2);
944 ata_dmacreate(atadev, apiomode, ATA_UDMA2);
945 return;
946 }
947 }
948 if (wdmamode >= 2 && apiomode >= 4) {
949 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
950 ATA_WDMA2, ATA_C_F_SETXFER, ATA_WAIT_READY);
951 if (bootverbose)
952 ata_prtdev(atadev, "%s setting WDMA2 on ServerWorks chip\n",
953 (error) ? "failed" : "success");
954 if (!error) {
955 int offset = devno ^ 0x01;
956 int word44 = pci_read_config(parent, 0x44, 4);
957
958 pci_write_config(parent, 0x54,
959 pci_read_config(parent, 0x54, 1) &
960 ~(0x01 << devno), 1);
961 word44 &= ~(0xff << (offset << 8));
962 word44 |= (0x20 << (offset << 8));
963 pci_write_config(parent, 0x44, 0x20, 4);
964 ata_dmacreate(atadev, apiomode, ATA_WDMA2);
965 return;
966 }
967 }
968 /* we could set PIO mode timings, but we assume the BIOS did that */
969 break;
970
971 case 0x4d69105a: /* Promise TX2 ATA133 controllers */
972 case 0x5275105a: /* Promise TX2 ATA133 controllers */
973 ATA_OUTB(atadev->channel->r_bmio, ATA_BMDEVSPEC_0, 0x0b);
974 if (udmamode >= 6 &&
975 !(ATA_INB(atadev->channel->r_bmio, ATA_BMDEVSPEC_1) & 0x04)) {
976 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
977 ATA_UDMA6, ATA_C_F_SETXFER, ATA_WAIT_READY);
978 if (bootverbose)
979 ata_prtdev(atadev, "%s setting UDMA6 on Promise chip\n",
980 (error) ? "failed" : "success");
981 if (!error) {
982 ata_dmacreate(atadev, apiomode, ATA_UDMA6);
983 return;
984 }
985 }
986 /* FALLTHROUGH */
987
988 case 0x4d68105a: /* Promise TX2 ATA100 controllers */
989 case 0x6268105a: /* Promise TX2 ATA100 controllers */
990 ATA_OUTB(atadev->channel->r_bmio, ATA_BMDEVSPEC_0, 0x0b);
991 if (udmamode >= 5 &&
992 !(ATA_INB(atadev->channel->r_bmio, ATA_BMDEVSPEC_1) & 0x04)) {
993 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
994 ATA_UDMA5, ATA_C_F_SETXFER, ATA_WAIT_READY);
995 if (bootverbose)
996 ata_prtdev(atadev, "%s setting UDMA5 on Promise chip\n",
997 (error) ? "failed" : "success");
998 if (!error) {
999 ata_dmacreate(atadev, apiomode, ATA_UDMA5);
1000 return;
1001 }
1002 }
1003 ATA_OUTB(atadev->channel->r_bmio, ATA_BMDEVSPEC_0, 0x0b);
1004 if (udmamode >= 4 &&
1005 !(ATA_INB(atadev->channel->r_bmio, ATA_BMDEVSPEC_1) & 0x04)) {
1006 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
1007 ATA_UDMA4, ATA_C_F_SETXFER, ATA_WAIT_READY);
1008 if (bootverbose)
1009 ata_prtdev(atadev, "%s setting UDMA4 on Promise chip\n",
1010 (error) ? "failed" : "success");
1011 if (!error) {
1012 ata_dmacreate(atadev, apiomode, ATA_UDMA4);
1013 return;
1014 }
1015 }
1016 if (udmamode >= 2) {
1017 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
1018 ATA_UDMA2, ATA_C_F_SETXFER, ATA_WAIT_READY);
1019 if (bootverbose)
1020 ata_prtdev(atadev, "%s setting UDMA on Promise chip\n",
1021 (error) ? "failed" : "success");
1022 if (!error) {
1023 ata_dmacreate(atadev, apiomode, ATA_UDMA2);
1024 return;
1025 }
1026 }
1027 if (wdmamode >= 2 && apiomode >= 4) {
1028 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
1029 ATA_WDMA2, ATA_C_F_SETXFER, ATA_WAIT_READY);
1030 if (bootverbose)
1031 ata_prtdev(atadev, "%s setting WDMA2 on Promise chip\n",
1032 (error) ? "failed" : "success");
1033 if (!error) {
1034 ata_dmacreate(atadev, apiomode, ATA_WDMA2);
1035 return;
1036 }
1037 }
1038 break;
1039
1040 case 0x4d30105a: /* Promise Ultra/FastTrak 100 controllers */
1041 case 0x0d30105a: /* Promise OEM ATA100 controllers */
1042 if (!ATAPI_DEVICE(atadev) && udmamode >= 5 &&
1043 !(pci_read_config(parent, 0x50, 2) & (channel ? 1<<11 : 1<<10))) {
1044 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
1045 ATA_UDMA5, ATA_C_F_SETXFER, ATA_WAIT_READY);
1046 if (bootverbose)
1047 ata_prtdev(atadev, "%s setting UDMA5 on Promise chip\n",
1048 (error) ? "failed" : "success");
1049 if (!error) {
1050 promise_timing(atadev, devno, ATA_UDMA5);
1051 ata_dmacreate(atadev, apiomode, ATA_UDMA5);
1052 return;
1053 }
1054 }
1055 /* FALLTHROUGH */
1056
1057 case 0x4d38105a: /* Promise Ultra/FastTrak 66 controllers */
1058 if (!ATAPI_DEVICE(atadev) && udmamode >= 4 &&
1059 !(pci_read_config(parent, 0x50, 2) & (channel ? 1<<11 : 1<<10))) {
1060 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
1061 ATA_UDMA4, ATA_C_F_SETXFER, ATA_WAIT_READY);
1062 if (bootverbose)
1063 ata_prtdev(atadev, "%s setting UDMA4 on Promise chip\n",
1064 (error) ? "failed" : "success");
1065 if (!error) {
1066 promise_timing(atadev, devno, ATA_UDMA4);
1067 ata_dmacreate(atadev, apiomode, ATA_UDMA4);
1068 return;
1069 }
1070 }
1071 /* FALLTHROUGH */
1072
1073 case 0x4d33105a: /* Promise Ultra/FastTrak 33 controllers */
1074 if (!ATAPI_DEVICE(atadev) && udmamode >= 2) {
1075 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
1076 ATA_UDMA2, ATA_C_F_SETXFER, ATA_WAIT_READY);
1077 if (bootverbose)
1078 ata_prtdev(atadev, "%s setting UDMA2 on Promise chip\n",
1079 (error) ? "failed" : "success");
1080 if (!error) {
1081 promise_timing(atadev, devno, ATA_UDMA2);
1082 ata_dmacreate(atadev, apiomode, ATA_UDMA2);
1083 return;
1084 }
1085 }
1086 if (!ATAPI_DEVICE(atadev) && wdmamode >= 2 && apiomode >= 4) {
1087 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
1088 ATA_WDMA2, ATA_C_F_SETXFER, ATA_WAIT_READY);
1089 if (bootverbose)
1090 ata_prtdev(atadev, "%s setting WDMA2 on Promise chip\n",
1091 (error) ? "failed" : "success");
1092 if (!error) {
1093 promise_timing(atadev, devno, ATA_WDMA2);
1094 ata_dmacreate(atadev, apiomode, ATA_WDMA2);
1095 return;
1096 }
1097 }
1098 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
1099 ATA_PIO0 + apiomode,
1100 ATA_C_F_SETXFER, ATA_WAIT_READY);
1101 if (bootverbose)
1102 ata_prtdev(atadev, "%s setting PIO%d on Promise chip\n",
1103 (error) ? "failed" : "success",
1104 (apiomode >= 0) ? apiomode : 0);
1105 promise_timing(atadev, devno, ATA_PIO0 + apiomode);
1106 atadev->mode = ATA_PIO0 + apiomode;
1107 return;
1108
1109 case 0x00041103: /* HighPoint HPT366/368/370/372 controllers */
1110 case 0x00051103: /* HighPoint HPT372 controllers */
1111 case 0x00081103: /* HighPoint HPT374 controllers */
1112 if (!ATAPI_DEVICE(atadev) && udmamode >= 6 && hpt_cable80(atadev) &&
1113 ((chiptype == 0x00041103 && chiprev >= 0x05) ||
1114 (chiptype == 0x00051103 && chiprev >= 0x01) ||
1115 (chiptype == 0x00081103 && chiprev >= 0x07))) {
1116 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
1117 ATA_UDMA6, ATA_C_F_SETXFER, ATA_WAIT_READY);
1118 if (bootverbose)
1119 ata_prtdev(atadev, "%s setting UDMA6 on HighPoint chip\n",
1120 (error) ? "failed" : "success");
1121 if (!error) {
1122 hpt_timing(atadev, devno, ATA_UDMA6);
1123 ata_dmacreate(atadev, apiomode, ATA_UDMA6);
1124 return;
1125 }
1126 }
1127 if (!ATAPI_DEVICE(atadev) && udmamode >= 5 && hpt_cable80(atadev) &&
1128 ((chiptype == 0x00041103 && chiprev >= 0x03) ||
1129 (chiptype == 0x00051103 && chiprev >= 0x01) ||
1130 (chiptype == 0x00081103 && chiprev >= 0x07))) {
1131 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
1132 ATA_UDMA5, ATA_C_F_SETXFER, ATA_WAIT_READY);
1133 if (bootverbose)
1134 ata_prtdev(atadev, "%s setting UDMA5 on HighPoint chip\n",
1135 (error) ? "failed" : "success");
1136 if (!error) {
1137 hpt_timing(atadev, devno, ATA_UDMA5);
1138 ata_dmacreate(atadev, apiomode, ATA_UDMA5);
1139 return;
1140 }
1141 }
1142 if (!ATAPI_DEVICE(atadev) && udmamode >= 4 && hpt_cable80(atadev)) {
1143 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
1144 ATA_UDMA4, ATA_C_F_SETXFER, ATA_WAIT_READY);
1145 if (bootverbose)
1146 ata_prtdev(atadev, "%s setting UDMA4 on HighPoint chip\n",
1147 (error) ? "failed" : "success");
1148 if (!error) {
1149 hpt_timing(atadev, devno, ATA_UDMA4);
1150 ata_dmacreate(atadev, apiomode, ATA_UDMA4);
1151 return;
1152 }
1153 }
1154 if (!ATAPI_DEVICE(atadev) && udmamode >= 2) {
1155 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
1156 ATA_UDMA2, ATA_C_F_SETXFER, ATA_WAIT_READY);
1157 if (bootverbose)
1158 ata_prtdev(atadev, "%s setting UDMA2 on HighPoint chip\n",
1159 (error) ? "failed" : "success");
1160 if (!error) {
1161 hpt_timing(atadev, devno, ATA_UDMA2);
1162 ata_dmacreate(atadev, apiomode, ATA_UDMA2);
1163 return;
1164 }
1165 }
1166 if (!ATAPI_DEVICE(atadev) && wdmamode >= 2 && apiomode >= 4) {
1167 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
1168 ATA_WDMA2, ATA_C_F_SETXFER, ATA_WAIT_READY);
1169 if (bootverbose)
1170 ata_prtdev(atadev, "%s setting WDMA2 on HighPoint chip\n",
1171 (error) ? "failed" : "success");
1172 if (!error) {
1173 hpt_timing(atadev, devno, ATA_WDMA2);
1174 ata_dmacreate(atadev, apiomode, ATA_WDMA2);
1175 return;
1176 }
1177 }
1178 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
1179 ATA_PIO0 + apiomode,
1180 ATA_C_F_SETXFER, ATA_WAIT_READY);
1181 if (bootverbose)
1182 ata_prtdev(atadev, "%s setting PIO%d on HighPoint chip\n",
1183 (error) ? "failed" : "success",
1184 (apiomode >= 0) ? apiomode : 0);
1185 hpt_timing(atadev, devno, ATA_PIO0 + apiomode);
1186 atadev->mode = ATA_PIO0 + apiomode;
1187 return;
1188
1189 case 0x000116ca: /* Cenatek Rocket Drive controller */
1190 if (wdmamode >= 0 &&
1191 (ATA_INB(atadev->channel->r_bmio, ATA_BMSTAT_PORT) &
1192 (device ? ATA_BMSTAT_DMA_SLAVE : ATA_BMSTAT_DMA_MASTER)))
1193 ata_dmacreate(atadev, apiomode, ATA_DMA);
1194 else
1195 atadev->mode = ATA_PIO;
1196 return;
1197
1198 default: /* unknown controller chip */
1199 /* better not try generic DMA on ATAPI devices it almost never works */
1200 if (ATAPI_DEVICE(atadev))
1201 break;
1202
1203 /* if controller says its setup for DMA take the easy way out */
1204 /* the downside is we dont know what DMA mode we are in */
1205 if ((udmamode >= 0 || wdmamode >= 2) &&
1206 (ATA_INB(atadev->channel->r_bmio, ATA_BMSTAT_PORT) &
1207 (device ? ATA_BMSTAT_DMA_SLAVE : ATA_BMSTAT_DMA_MASTER))) {
1208 ata_dmacreate(atadev, apiomode, ATA_DMA);
1209 return;
1210 }
1211
1212 /* well, we have no support for this, but try anyways */
1213 if ((wdmamode >= 2 && apiomode >= 4) && atadev->channel->r_bmio) {
1214 error = ata_command(atadev, ATA_C_SETFEATURES, 0,
1215 ATA_WDMA2, ATA_C_F_SETXFER, ATA_WAIT_READY);
1216 if (bootverbose)
1217 ata_prtdev(atadev, "%s setting WDMA2 on generic chip\n",
1218 (error) ? "failed" : "success");
1219 if (!error) {
1220 ata_dmacreate(atadev, apiomode, ATA_WDMA2);
1221 return;
1222 }
1223 }
1224 }
1225 error = ata_command(atadev, ATA_C_SETFEATURES, 0, ATA_PIO0 + apiomode,
1226 ATA_C_F_SETXFER, ATA_WAIT_READY);
1227 if (bootverbose)
1228 ata_prtdev(atadev, "%s setting PIO%d on generic chip\n",
1229 (error) ? "failed" : "success", apiomode < 0 ? 0 : apiomode);
1230 if (!error)
1231 atadev->mode = ATA_PIO0 + apiomode;
1232 else {
1233 if (bootverbose)
1234 ata_prtdev(atadev, "using PIO mode set by BIOS\n");
1235 atadev->mode = ATA_PIO;
1236 }
1237}
1238
1239struct ata_dmasetup_data_cb_args {
1240 struct ata_dmaentry *dmatab;
1241 int error;
1242};
1243
1244static void
1245ata_dmasetupd_cb(void *xsc, bus_dma_segment_t *segs, int nsegs, int error)
1246{
1247 struct ata_dmasetup_data_cb_args *cba =
1248 (struct ata_dmasetup_data_cb_args *)xsc;
1249 bus_size_t cnt;
1250 u_int32_t lastcount;
1251 int i, j;
1252
1253 cba->error = error;
1254 if (error != 0)
1255 return;
1256 lastcount = j = 0;
1257 for (i = 0; i < nsegs; i++) {
1258 /*
1259 * A maximum segment size was specified for bus_dma_tag_create, but
1260 * some busdma code does not seem to honor this, so fix up if needed.
1261 */
1262 for (cnt = 0; cnt < segs[i].ds_len; cnt += MAXSEGSZ, j++) {
1263 cba->dmatab[j].base = htole32(segs[i].ds_addr + cnt);
1264 lastcount = ulmin(segs[i].ds_len - cnt, MAXSEGSZ) & 0xffff;
1265 cba->dmatab[j].count = htole32(lastcount);
1266 }
1267 }
1268 cba->dmatab[j - 1].count = htole32(lastcount | ATA_DMA_EOT);
1269}
1270
1271int
1272ata_dmasetup(struct ata_device *atadev, caddr_t data, int32_t count)
1273{
1274 struct ata_channel *ch = atadev->channel;
1275 struct ata_dmastate *ds = &atadev->dmastate;
1276 struct ata_dmasetup_data_cb_args cba;
1277
1278 if (ds->flags & ATA_DS_ACTIVE)
1279 panic("ata_dmasetup: transfer active on this device!");
1280
1281 if (((uintptr_t)data & ch->alignment) || (count & ch->alignment)) {
1282 ata_prtdev(atadev, "non aligned DMA transfer attempted\n");
1283 return -1;
1284 }
1285
1286 if (!count) {
1287 ata_prtdev(atadev, "zero length DMA transfer attempted\n");
1288 return -1;
1289 }
1290
1291 cba.dmatab = ds->dmatab;
1292 if (bus_dmamap_load(ds->ddmatag, ds->ddmamap, data, count,
1293 ata_dmasetupd_cb, &cba, 0) || cba.error)
1294 ds->flags = ATA_DS_ACTIVE;
1295 bus_dmamap_sync(ds->cdmatag, ds->cdmamap, BUS_DMASYNC_PREWRITE);
1296
1297 return 0;
1298}
1299
1300void
1301ata_dmastart(struct ata_device *atadev, int dir)
1302{
1303 struct ata_channel *ch;
1304 struct ata_dmastate *ds;
1305
1306 ch = atadev->channel;
1307 ds = &atadev->dmastate;
1308 bus_dmamap_sync(ds->ddmatag, ds->ddmamap, dir ? BUS_DMASYNC_PREREAD :
1309 BUS_DMASYNC_PREWRITE);
1310 if (dir)
1311 ds->flags |= ATA_DS_READ;
1312 ch->flags |= ATA_DMA_ACTIVE;
1313 ATA_OUTL(ch->r_bmio, ATA_BMDTP_PORT, ds->mdmatab);
1314 ATA_OUTB(ch->r_bmio, ATA_BMCMD_PORT, dir ? ATA_BMCMD_WRITE_READ : 0);
1315 ATA_OUTB(ch->r_bmio, ATA_BMSTAT_PORT,
1316 (ATA_INB(ch->r_bmio, ATA_BMSTAT_PORT) |
1317 (ATA_BMSTAT_INTERRUPT | ATA_BMSTAT_ERROR)));
1318 ATA_OUTB(ch->r_bmio, ATA_BMCMD_PORT,
1319 ATA_INB(ch->r_bmio, ATA_BMCMD_PORT) | ATA_BMCMD_START_STOP);
1320}
1321
1322int
1323ata_dmadone(struct ata_device *atadev)
1324{
1325 struct ata_channel *ch;
1326 struct ata_dmastate *ds;
1327 int error;
1328
1329 ch = atadev->channel;
1330 ds = &atadev->dmastate;
1331 bus_dmamap_sync(ds->ddmatag, ds->ddmamap, (ds->flags & ATA_DS_READ) != 0 ?
1332 BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE);
1333 bus_dmamap_unload(ds->ddmatag, ds->ddmamap);
1334 ATA_OUTB(ch->r_bmio, ATA_BMCMD_PORT,
1335 ATA_INB(ch->r_bmio, ATA_BMCMD_PORT) & ~ATA_BMCMD_START_STOP);
1336 ch->flags &= ~ATA_DMA_ACTIVE;
1337 error = ATA_INB(ch->r_bmio, ATA_BMSTAT_PORT);
1338 ATA_OUTB(ch->r_bmio, ATA_BMSTAT_PORT,
1339 error | ATA_BMSTAT_INTERRUPT | ATA_BMSTAT_ERROR);
1340 ds->flags = 0;
1341 return error & ATA_BMSTAT_MASK;
1342}
1343
1344int
1345ata_dmastatus(struct ata_channel *ch)
1346{
1347 return ATA_INB(ch->r_bmio, ATA_BMSTAT_PORT) & ATA_BMSTAT_MASK;
1348}
1349
1350static void
1351cyrix_timing(struct ata_device *atadev, int devno, int mode)
1352{
1353 u_int32_t reg20 = 0x0000e132;
1354 u_int32_t reg24 = 0x00017771;
1355
1356 switch (mode) {
1357 case ATA_PIO0: reg20 = 0x0000e132; break;
1358 case ATA_PIO1: reg20 = 0x00018121; break;
1359 case ATA_PIO2: reg20 = 0x00024020; break;
1360 case ATA_PIO3: reg20 = 0x00032010; break;
1361 case ATA_PIO4: reg20 = 0x00040010; break;
1362 case ATA_WDMA2: reg24 = 0x00002020; break;
1363 case ATA_UDMA2: reg24 = 0x00911030; break;
1364 }
1365 ATA_OUTL(atadev->channel->r_bmio, (devno << 3) + 0x20, reg20);
1366 ATA_OUTL(atadev->channel->r_bmio, (devno << 3) + 0x24, reg24);
1367}
1368
1369static void
1370promise_timing(struct ata_device *atadev, int devno, int mode)
1371{
1372 u_int32_t timing = 0;
1373 /* XXX: Endianess */
1374 struct promise_timing {
1375 u_int8_t pa:4;
1376 u_int8_t prefetch:1;
1377 u_int8_t iordy:1;
1378 u_int8_t errdy:1;
1379 u_int8_t syncin:1;
1380 u_int8_t pb:5;
1381 u_int8_t mb:3;
1382 u_int8_t mc:4;
1383 u_int8_t dmaw:1;
1384 u_int8_t dmar:1;
1385 u_int8_t iordyp:1;
1386 u_int8_t dmarqp:1;
1387 u_int8_t reserved:8;
1388 } *t = (struct promise_timing*)&timing;
1389
1390 t->iordy = 1; t->iordyp = 1;
1391 if (mode >= ATA_DMA) {
1392 t->prefetch = 1; t->errdy = 1; t->syncin = 1;
1393 }
1394
1395 switch (atadev->channel->chiptype) {
1396 case 0x4d33105a: /* Promise Ultra/Fasttrak 33 */
1397 switch (mode) {
1398 default:
1399 case ATA_PIO0: t->pa = 9; t->pb = 19; t->mb = 7; t->mc = 15; break;
1400 case ATA_PIO1: t->pa = 5; t->pb = 12; t->mb = 7; t->mc = 15; break;
1401 case ATA_PIO2: t->pa = 3; t->pb = 8; t->mb = 7; t->mc = 15; break;
1402 case ATA_PIO3: t->pa = 2; t->pb = 6; t->mb = 7; t->mc = 15; break;
1403 case ATA_PIO4: t->pa = 1; t->pb = 4; t->mb = 7; t->mc = 15; break;
1404 case ATA_WDMA2: t->pa = 3; t->pb = 7; t->mb = 3; t->mc = 3; break;
1405 case ATA_UDMA2: t->pa = 3; t->pb = 7; t->mb = 1; t->mc = 1; break;
1406 }
1407 break;
1408
1409 case 0x4d38105a: /* Promise Ultra/Fasttrak 66 */
1410 case 0x4d30105a: /* Promise Ultra/Fasttrak 100 */
1411 case 0x0d30105a: /* Promise OEM ATA 100 */
1412 switch (mode) {
1413 default:
1414 case ATA_PIO0: t->pa = 15; t->pb = 31; t->mb = 7; t->mc = 15; break;
1415 case ATA_PIO1: t->pa = 10; t->pb = 24; t->mb = 7; t->mc = 15; break;
1416 case ATA_PIO2: t->pa = 6; t->pb = 16; t->mb = 7; t->mc = 15; break;
1417 case ATA_PIO3: t->pa = 4; t->pb = 12; t->mb = 7; t->mc = 15; break;
1418 case ATA_PIO4: t->pa = 2; t->pb = 8; t->mb = 7; t->mc = 15; break;
1419 case ATA_WDMA2: t->pa = 6; t->pb = 14; t->mb = 6; t->mc = 6; break;
1420 case ATA_UDMA2: t->pa = 6; t->pb = 14; t->mb = 2; t->mc = 2; break;
1421 case ATA_UDMA4: t->pa = 3; t->pb = 7; t->mb = 1; t->mc = 1; break;
1422 case ATA_UDMA5: t->pa = 3; t->pb = 7; t->mb = 1; t->mc = 1; break;
1423 }
1424 break;
1425 }
1426 pci_write_config(device_get_parent(atadev->channel->dev),
1427 0x60 + (devno << 2), timing, 4);
1428}
1429
1430static void
1431hpt_timing(struct ata_device *atadev, int devno, int mode)
1432{
1433 device_t parent = device_get_parent(atadev->channel->dev);
1434 u_int32_t chiptype = atadev->channel->chiptype;
1435 int chiprev = pci_get_revid(parent);
1436 u_int32_t timing;
1437
1438 if (chiptype == 0x00081103 && chiprev >= 0x07) {
1439 switch (mode) { /* HPT374 */
1440 case ATA_PIO0: timing = 0x0ac1f48a; break;
1441 case ATA_PIO1: timing = 0x0ac1f465; break;
1442 case ATA_PIO2: timing = 0x0a81f454; break;
1443 case ATA_PIO3: timing = 0x0a81f443; break;
1444 case ATA_PIO4: timing = 0x0a81f442; break;
1445 case ATA_WDMA2: timing = 0x22808242; break;
1446 case ATA_UDMA2: timing = 0x120c8242; break;
1447 case ATA_UDMA4: timing = 0x12ac8242; break;
1448 case ATA_UDMA5: timing = 0x12848242; break;
1449 case ATA_UDMA6: timing = 0x12808242; break;
1450 default: timing = 0x0d029d5e;
1451 }
1452 }
1453 else if ((chiptype == 0x00041103 && chiprev >= 0x05) ||
1454 (chiptype == 0x00051103 && chiprev >= 0x01)) {
1455 switch (mode) { /* HPT372 */
1456 case ATA_PIO0: timing = 0x0d029d5e; break;
1457 case ATA_PIO1: timing = 0x0d029d26; break;
1458 case ATA_PIO2: timing = 0x0c829ca6; break;
1459 case ATA_PIO3: timing = 0x0c829c84; break;
1460 case ATA_PIO4: timing = 0x0c829c62; break;
1461 case ATA_WDMA2: timing = 0x2c829262; break;
1462 case ATA_UDMA2: timing = 0x1c91dc62; break;
1463 case ATA_UDMA4: timing = 0x1c8ddc62; break;
1464 case ATA_UDMA5: timing = 0x1c6ddc62; break;
1465 case ATA_UDMA6: timing = 0x1c81dc62; break;
1466 default: timing = 0x0d029d5e;
1467 }
1468 }
1469 else if (chiptype == 0x00041103 && chiprev >= 0x03) {
1470 switch (mode) { /* HPT370 */
1471 case ATA_PIO0: timing = 0x06914e57; break;
1472 case ATA_PIO1: timing = 0x06914e43; break;
1473 case ATA_PIO2: timing = 0x06514e33; break;
1474 case ATA_PIO3: timing = 0x06514e22; break;
1475 case ATA_PIO4: timing = 0x06514e21; break;
1476 case ATA_WDMA2: timing = 0x26514e21; break;
1477 case ATA_UDMA2: timing = 0x16494e31; break;
1478 case ATA_UDMA4: timing = 0x16454e31; break;
1479 case ATA_UDMA5: timing = 0x16454e31; break;
1480 default: timing = 0x06514e57;
1481 }
1482 pci_write_config(parent, 0x40 + (devno << 2) , timing, 4);
1483 }
1484 else { /* HPT36[68] */
1485 switch (pci_read_config(parent, 0x41 + (devno << 2), 1)) {
1486 case 0x85: /* 25Mhz */
1487 switch (mode) {
1488 case ATA_PIO0: timing = 0x40d08585; break;
1489 case ATA_PIO1: timing = 0x40d08572; break;
1490 case ATA_PIO2: timing = 0x40ca8542; break;
1491 case ATA_PIO3: timing = 0x40ca8532; break;
1492 case ATA_PIO4: timing = 0x40ca8521; break;
1493 case ATA_WDMA2: timing = 0x20ca8521; break;
1494 case ATA_UDMA2: timing = 0x10cf8521; break;
1495 case ATA_UDMA4: timing = 0x10c98521; break;
1496 default: timing = 0x01208585;
1497 }
1498 break;
1499 default:
1500 case 0xa7: /* 33MHz */
1501 switch (mode) {
1502 case ATA_PIO0: timing = 0x40d0a7aa; break;
1503 case ATA_PIO1: timing = 0x40d0a7a3; break;
1504 case ATA_PIO2: timing = 0x40d0a753; break;
1505 case ATA_PIO3: timing = 0x40c8a742; break;
1506 case ATA_PIO4: timing = 0x40c8a731; break;
1507 case ATA_WDMA2: timing = 0x20c8a731; break;
1508 case ATA_UDMA2: timing = 0x10caa731; break;
1509 case ATA_UDMA4: timing = 0x10c9a731; break;
1510 default: timing = 0x0120a7a7;
1511 }
1512 break;
1513 case 0xd9: /* 40Mhz */
1514 switch (mode) {
1515 case ATA_PIO0: timing = 0x4018d9d9; break;
1516 case ATA_PIO1: timing = 0x4010d9c7; break;
1517 case ATA_PIO2: timing = 0x4010d997; break;
1518 case ATA_PIO3: timing = 0x4010d974; break;
1519 case ATA_PIO4: timing = 0x4008d963; break;
1520 case ATA_WDMA2: timing = 0x2008d943; break;
1521 case ATA_UDMA2: timing = 0x100bd943; break;
1522 case ATA_UDMA4: timing = 0x100fd943; break;
1523 default: timing = 0x0120d9d9;
1524 }
1525 }
1526 }
1527 pci_write_config(parent, 0x40 + (devno << 2) , timing, 4);
1528}
1529
1530static int
1531hpt_cable80(struct ata_device *atadev)
1532{
1533 device_t parent = device_get_parent(atadev->channel->dev);
1534 u_int8_t reg, val, res;
1535
1536 if (atadev->channel->chiptype==0x00081103 && pci_get_function(parent)==1) {
1537 reg = atadev->channel->unit ? 0x57 : 0x53;
1538 val = pci_read_config(parent, reg, 1);
1539 pci_write_config(parent, reg, val | 0x80, 1);
1540 }
1541 else {
1542 reg = 0x5b;
1543 val = pci_read_config(parent, reg, 1);
1544 pci_write_config(parent, reg, val & 0xfe, 1);
1545 }
1546 res = pci_read_config(parent, 0x5a, 1) & (atadev->channel->unit ? 0x1:0x2);
1547 pci_write_config(parent, reg, val, 1);
1548 return !res;
1549}