1/*- 2 * Copyright (c) 1998,1999,2000,2001 S�ren Schmidt <sos@FreeBSD.org> 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer, 10 * without modification, immediately at the beginning of the file. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 3. The name of the author may not be used to endorse or promote products 15 * derived from this software without specific prior written permission. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 19 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 20 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 21 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 22 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 26 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 27 *
|
28 * $FreeBSD: head/sys/dev/ata/ata-all.h 84419 2001-10-03 11:36:25Z sos $
|
28 * $FreeBSD: head/sys/dev/ata/ata-all.h 84584 2001-10-06 11:07:04Z sos $ |
29 */ 30 31/* ATA register defines */ 32#define ATA_DATA 0x00 /* data register */ 33#define ATA_ERROR 0x01 /* (R) error register */ 34#define ATA_E_NM 0x02 /* no media */ 35#define ATA_E_ABORT 0x04 /* command aborted */ 36#define ATA_E_MCR 0x08 /* media change request */ 37#define ATA_E_IDNF 0x10 /* ID not found */ 38#define ATA_E_MC 0x20 /* media changed */ 39#define ATA_E_UNC 0x40 /* uncorrectable data */ 40#define ATA_E_ICRC 0x80 /* UDMA crc error */ 41 42#define ATA_FEATURE 0x01 /* (W) feature register */ 43#define ATA_F_DMA 0x01 /* enable DMA */ 44#define ATA_F_OVL 0x02 /* enable overlap */ 45 46#define ATA_COUNT 0x02 /* (W) sector count */ 47#define ATA_IREASON 0x02 /* (R) interrupt reason */ 48#define ATA_I_CMD 0x01 /* cmd (1) | data (0) */ 49#define ATA_I_IN 0x02 /* read (1) | write (0) */ 50#define ATA_I_RELEASE 0x04 /* released bus (1) */ 51#define ATA_I_TAGMASK 0xf8 /* tag mask */ 52 53#define ATA_SECTOR 0x03 /* sector # */ 54#define ATA_CYL_LSB 0x04 /* cylinder# LSB */ 55#define ATA_CYL_MSB 0x05 /* cylinder# MSB */ 56#define ATA_DRIVE 0x06 /* Sector/Drive/Head register */ 57#define ATA_D_LBA 0x40 /* use LBA addressing */ 58#define ATA_D_IBM 0xa0 /* 512 byte sectors, ECC */ 59 60#define ATA_CMD 0x07 /* command register */ 61#define ATA_C_NOP 0x00 /* NOP command */ 62#define ATA_C_F_FLUSHQUEUE 0x00 /* flush queued cmd's */ 63#define ATA_C_F_AUTOPOLL 0x01 /* start autopoll function */ 64#define ATA_C_ATAPI_RESET 0x08 /* reset ATAPI device */ 65#define ATA_C_READ 0x20 /* read command */
|
66#define ATA_C_READ48 0x24 /* read command */ 67#define ATA_C_READ_DMA48 0x25 /* read w/DMA command */ 68#define ATA_C_READ_DMA_QUEUED48 0x26 /* read w/DMA QUEUED command */ 69#define ATA_C_READ_MUL48 0x29 /* read multi command */ |
70#define ATA_C_WRITE 0x30 /* write command */
|
71#define ATA_C_WRITE48 0x34 /* write command */ 72#define ATA_C_WRITE_DMA48 0x35 /* write w/DMA command */ 73#define ATA_C_WRITE_DMA_QUEUED48 0x36 /* write w/DMA QUEUED command */ 74#define ATA_C_WRITE_MUL48 0x39 /* write multi command */ |
75#define ATA_C_PACKET_CMD 0xa0 /* packet command */ 76#define ATA_C_ATAPI_IDENTIFY 0xa1 /* get ATAPI params*/ 77#define ATA_C_SERVICE 0xa2 /* service command */ 78#define ATA_C_READ_MUL 0xc4 /* read multi command */ 79#define ATA_C_WRITE_MUL 0xc5 /* write multi command */ 80#define ATA_C_SET_MULTI 0xc6 /* set multi size command */ 81#define ATA_C_READ_DMA_QUEUED 0xc7 /* read w/DMA QUEUED command */ 82#define ATA_C_READ_DMA 0xc8 /* read w/DMA command */ 83#define ATA_C_WRITE_DMA 0xca /* write w/DMA command */ 84#define ATA_C_WRITE_DMA_QUEUED 0xcc /* write w/DMA QUEUED command */ 85#define ATA_C_SLEEP 0xe6 /* sleep command */ 86#define ATA_C_FLUSHCACHE 0xe7 /* flush cache to disk */
|
87#define ATA_C_FLUSHCACHE48 0xea /* flush cache to disk */ |
88#define ATA_C_ATA_IDENTIFY 0xec /* get ATA params */ 89#define ATA_C_SETFEATURES 0xef /* features command */ 90#define ATA_C_F_SETXFER 0x03 /* set transfer mode */ 91#define ATA_C_F_ENAB_WCACHE 0x02 /* enable write cache */ 92#define ATA_C_F_DIS_WCACHE 0x82 /* disable write cache */ 93#define ATA_C_F_ENAB_RCACHE 0xaa /* enable readahead cache */ 94#define ATA_C_F_DIS_RCACHE 0x55 /* disable readahead cache */ 95#define ATA_C_F_ENAB_RELIRQ 0x5d /* enable release interrupt */ 96#define ATA_C_F_DIS_RELIRQ 0xdd /* disable release interrupt */ 97#define ATA_C_F_ENAB_SRVIRQ 0x5e /* enable service interrupt */ 98#define ATA_C_F_DIS_SRVIRQ 0xde /* disable service interrupt */ 99 100#define ATA_STATUS 0x07 /* status register */ 101#define ATA_S_ERROR 0x01 /* error */ 102#define ATA_S_INDEX 0x02 /* index */ 103#define ATA_S_CORR 0x04 /* data corrected */ 104#define ATA_S_DRQ 0x08 /* data request */ 105#define ATA_S_DSC 0x10 /* drive seek completed */ 106#define ATA_S_SERVICE 0x10 /* drive needs service */ 107#define ATA_S_DWF 0x20 /* drive write fault */ 108#define ATA_S_DMA 0x20 /* DMA ready */ 109#define ATA_S_READY 0x40 /* drive ready */ 110#define ATA_S_BUSY 0x80 /* busy */ 111 112#define ATA_ALTSTAT 0x00 /* alternate status register */ 113#define ATA_ALTOFFSET 0x206 /* alternate registers offset */ 114#define ATA_PCCARD_ALTOFFSET 0x0e /* do for PCCARD devices */ 115#define ATA_A_IDS 0x02 /* disable interrupts */ 116#define ATA_A_RESET 0x04 /* RESET controller */ 117#define ATA_A_4BIT 0x08 /* 4 head bits */ 118 119/* misc defines */ 120#define ATA_PRIMARY 0x1f0 121#define ATA_SECONDARY 0x170 122#define ATA_MASTER 0x00 123#define ATA_SLAVE 0x10 124#define ATA_IOSIZE 0x08 125#define ATA_ALTIOSIZE 0x01 126#define ATA_BMIOSIZE 0x08 127#define ATA_OP_FINISHED 0x00 128#define ATA_OP_CONTINUES 0x01 129#define ATA_DEV(device) ((device == ATA_MASTER) ? 0 : 1) 130#define ATA_PARAM(scp, device) (scp->dev_param[ATA_DEV(device)]) 131 132#define ATA_IOADDR_RID 0 133#define ATA_ALTADDR_RID 1 134#define ATA_BMADDR_RID 2 135#define ATA_IRQ_RID 0 136 137/* busmaster DMA related defines */ 138#define ATA_DMA_ENTRIES 256 139#define ATA_DMA_EOT 0x80000000 140 141#define ATA_BMCMD_PORT 0x00
|
133#define ATA_BMCMD_START_STOP 0x01
134#define ATA_BMCMD_WRITE_READ 0x08
|
142#define ATA_BMCMD_START_STOP 0x01 143#define ATA_BMCMD_WRITE_READ 0x08 |
144 145#define ATA_BMDEVSPEC_0 0x01 146 147#define ATA_BMSTAT_PORT 0x02
|
139#define ATA_BMSTAT_ACTIVE 0x01
140#define ATA_BMSTAT_ERROR 0x02
141#define ATA_BMSTAT_INTERRUPT 0x04
142#define ATA_BMSTAT_MASK 0x07
143#define ATA_BMSTAT_DMA_MASTER 0x20
144#define ATA_BMSTAT_DMA_SLAVE 0x40
145#define ATA_BMSTAT_DMA_SIMPLEX 0x80
|
148#define ATA_BMSTAT_ACTIVE 0x01 149#define ATA_BMSTAT_ERROR 0x02 150#define ATA_BMSTAT_INTERRUPT 0x04 151#define ATA_BMSTAT_MASK 0x07 152#define ATA_BMSTAT_DMA_MASTER 0x20 153#define ATA_BMSTAT_DMA_SLAVE 0x40 154#define ATA_BMSTAT_DMA_SIMPLEX 0x80 |
155 156#define ATA_BMDEVSPEC_1 0x03
|
148
|
157#define ATA_BMDTP_PORT 0x04 158 159/* structure for holding DMA address data */ 160struct ata_dmaentry {
|
153 u_int32_t base;
154 u_int32_t count;
|
161 u_int32_t base; 162 u_int32_t count; |
163}; 164 165/* structure describing an ATA device */ 166struct ata_softc { 167 struct device *dev; /* device handle */ 168 int channel; /* channel on this controller */ 169 struct resource *r_io; /* io addr resource handle */ 170 struct resource *r_altio; /* altio addr resource handle */ 171 struct resource *r_bmio; /* bmio addr resource handle */ 172 struct resource *r_irq; /* interrupt of this channel */ 173 void *ih; /* interrupt handle */ 174 int (*intr_func)(struct ata_softc *); /* interrupt function */ 175 u_int32_t chiptype; /* pciid of controller chip */ 176 u_int32_t alignment; /* dma engine min alignment */ 177 char *dev_name[2]; /* name of device */ 178 struct ata_params *dev_param[2]; /* ptr to devices params */ 179 void *dev_softc[2]; /* ptr to devices softc's */ 180 int mode[2]; /* transfer mode for devices */ 181 int flags; /* controller flags */
|
174#define ATA_DMA_ACTIVE 0x01
175#define ATA_ATAPI_DMA_RO 0x02
176#define ATA_USE_16BIT 0x04
177#define ATA_NO_SLAVE 0x08
178#define ATA_QUEUED 0x10
|
182#define ATA_NO_SLAVE 0x01 183#define ATA_USE_16BIT 0x02 184#define ATA_ATAPI_DMA_RO 0x04 185#define ATA_QUEUED 0x08 186#define ATA_DMA_ACTIVE 0x10 |
187 188 int devices; /* what is present */ 189#define ATA_ATA_MASTER 0x01 190#define ATA_ATA_SLAVE 0x02 191#define ATA_ATAPI_MASTER 0x04 192#define ATA_ATAPI_SLAVE 0x08 193 194 u_int8_t status; /* last controller status */ 195 u_int8_t error; /* last controller error */ 196 int active; /* active processing request */ 197#define ATA_IDLE 0x0000 198#define ATA_IMMEDIATE 0x0001 199#define ATA_WAIT_INTR 0x0002 200#define ATA_WAIT_READY 0x0004
|
193#define ATA_ACTIVE 0x0008
194#define ATA_ACTIVE_ATA 0x0010
195#define ATA_ACTIVE_ATAPI 0x0020
196#define ATA_CONTROL 0x0040
|
201#define ATA_WAIT_MASK 0x0007 202#define ATA_USE_CHS 0x0008 203#define ATA_ACTIVE 0x0010 204#define ATA_ACTIVE_ATA 0x0020 205#define ATA_ACTIVE_ATAPI 0x0040 206#define ATA_CONTROL 0x0080 |
207 208 TAILQ_HEAD(, ad_request) ata_queue; /* head of ATA queue */ 209 TAILQ_HEAD(, atapi_request) atapi_queue; /* head of ATAPI queue */ 210 void *running; /* currently running request */ 211}; 212 213/* externs */ 214extern devclass_t ata_devclass; 215 216/* public prototypes */ 217int ata_probe(device_t); 218int ata_attach(device_t); 219int ata_detach(device_t); 220int ata_resume(device_t); 221 222void ata_start(struct ata_softc *); 223void ata_reset(struct ata_softc *); 224int ata_reinit(struct ata_softc *); 225int ata_wait(struct ata_softc *, int, u_int8_t);
|
216int ata_command(struct ata_softc *, int, u_int8_t, u_int16_t, u_int8_t, u_int8_t, u_int8_t, u_int8_t, int);
|
226int ata_command(struct ata_softc *, int, u_int8_t, u_int64_t, u_int16_t, u_int8_t, int); |
227int ata_printf(struct ata_softc *, int, const char *, ...) __printflike(3, 4); 228void ata_set_name(struct ata_softc *, int, char *, int); 229void ata_free_name(struct ata_softc *, int); 230int ata_get_lun(u_int32_t *); 231int ata_test_lun(u_int32_t *, int); 232void ata_free_lun(u_int32_t *, int); 233char *ata_mode2str(int);
|
224int ata_pio2mode(int);
|
234int ata_pmode(struct ata_params *); 235int ata_wmode(struct ata_params *); 236int ata_umode(struct ata_params *); 237int ata_find_dev(device_t, u_int32_t, u_int32_t); 238 239void *ata_dmaalloc(struct ata_softc *, int); 240void ata_dmainit(struct ata_softc *, int, int, int, int); 241int ata_dmasetup(struct ata_softc *, int, struct ata_dmaentry *, caddr_t, int); 242void ata_dmastart(struct ata_softc *, int, struct ata_dmaentry *, int); 243int ata_dmastatus(struct ata_softc *); 244int ata_dmadone(struct ata_softc *); 245 246/* macros to hide busspace uglyness */ 247#define ATA_INB(res, offset) \ 248 bus_space_read_1(rman_get_bustag((res)), \ 249 rman_get_bushandle((res)), (offset)) 250#define ATA_INW(res, offset) \ 251 bus_space_read_2(rman_get_bustag((res)), \ 252 rman_get_bushandle((res)), (offset)) 253#define ATA_INL(res, offset) \ 254 bus_space_read_4(rman_get_bustag((res)), \ 255 rman_get_bushandle((res)), (offset)) 256#define ATA_INSW(res, offset, addr, count) \ 257 bus_space_read_multi_2(rman_get_bustag((res)), \ 258 rman_get_bushandle((res)), \ 259 (offset), (addr), (count)) 260#define ATA_INSL(res, offset, addr, count) \ 261 bus_space_read_multi_4(rman_get_bustag((res)), \ 262 rman_get_bushandle((res)), \ 263 (offset), (addr), (count)) 264#define ATA_OUTB(res, offset, value) \ 265 bus_space_write_1(rman_get_bustag((res)), \ 266 rman_get_bushandle((res)), (offset), (value)) 267#define ATA_OUTW(res, offset, value) \ 268 bus_space_write_2(rman_get_bustag((res)), \ 269 rman_get_bushandle((res)), (offset), (value)) 270#define ATA_OUTL(res, offset, value) \ 271 bus_space_write_4(rman_get_bustag((res)), \ 272 rman_get_bushandle((res)), (offset), (value)) 273#define ATA_OUTSW(res, offset, addr, count) \ 274 bus_space_write_multi_2(rman_get_bustag((res)), \ 275 rman_get_bushandle((res)), \ 276 (offset), (addr), (count)) 277#define ATA_OUTSL(res, offset, addr, count) \ 278 bus_space_write_multi_4(rman_get_bustag((res)), \ 279 rman_get_bushandle((res)), \ 280 (offset), (addr), (count))
|