1/*- 2 * Copyright (c) 1998,1999,2000 S�ren Schmidt 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer, 10 * without modification, immediately at the beginning of the file. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 3. The name of the author may not be used to endorse or promote products 15 * derived from this software without specific prior written permission. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 19 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 20 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 21 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 22 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 26 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 27 *
|
28 * $FreeBSD: head/sys/dev/ata/ata-all.h 56744 2000-01-28 13:35:43Z sos $
|
28 * $FreeBSD: head/sys/dev/ata/ata-all.h 57325 2000-02-18 20:57:33Z sos $ |
29 */ 30 31/* ATA register defines */ 32#define ATA_DATA 0x00 /* data register */ 33#define ATA_ERROR 0x01 /* (R) error register */ 34#define ATA_E_NM 0x02 /* no media */ 35#define ATA_E_ABORT 0x04 /* command aborted */ 36#define ATA_E_MCR 0x08 /* media change request */ 37#define ATA_E_IDNF 0x10 /* ID not found */ 38#define ATA_E_MC 0x20 /* media changed */ 39#define ATA_E_UNC 0x40 /* uncorrectable data */ 40#define ATA_E_ICRC 0x80 /* UDMA crc error */ 41 42#define ATA_FEATURE 0x01 /* (W) feature register */ 43#define ATA_F_DMA 0x01 /* enable DMA */ 44#define ATA_F_OVL 0x02 /* enable overlap */ 45 46#define ATA_COUNT 0x02 /* (W) sector count */ 47#define ATA_IREASON 0x02 /* (R) interrupt reason */ 48#define ATA_I_CMD 0x01 /* cmd (1) | data (0) */ 49#define ATA_I_IN 0x02 /* read (1) | write (0) */ 50#define ATA_I_RELEASE 0x04 /* released bus (1) */ 51#define ATA_I_TAGMASK 0xf8 /* tag mask */ 52 53#define ATA_SECTOR 0x03 /* sector # */ 54#define ATA_CYL_LSB 0x04 /* cylinder# LSB */ 55#define ATA_CYL_MSB 0x05 /* cylinder# MSB */ 56#define ATA_DRIVE 0x06 /* Sector/Drive/Head register */ 57#define ATA_D_LBA 0x40 /* use LBA adressing */ 58#define ATA_D_IBM 0xa0 /* 512 byte sectors, ECC */ 59 60#define ATA_CMD 0x07 /* command register */ 61#define ATA_C_ATAPI_RESET 0x08 /* reset ATAPI device */ 62#define ATA_C_READ 0x20 /* read command */ 63#define ATA_C_WRITE 0x30 /* write command */ 64#define ATA_C_PACKET_CMD 0xa0 /* packet command */ 65#define ATA_C_ATAPI_IDENTIFY 0xa1 /* get ATAPI params*/ 66#define ATA_C_READ_MULTI 0xc4 /* read multi command */ 67#define ATA_C_WRITE_MULTI 0xc5 /* write multi command */ 68#define ATA_C_SET_MULTI 0xc6 /* set multi size command */ 69#define ATA_C_READ_DMA 0xc8 /* read w/DMA command */ 70#define ATA_C_WRITE_DMA 0xca /* write w/DMA command */ 71#define ATA_C_ATA_IDENTIFY 0xec /* get ATA params */ 72#define ATA_C_SETFEATURES 0xef /* features command */ 73#define ATA_C_F_SETXFER 0x03 /* set transfer mode */ 74#define ATA_C_F_ENAB_RCACHE 0xaa /* enable readahead cache */ 75#define ATA_C_F_ENAB_WCACHE 0x02 /* enable write cache */ 76 77#define ATA_STATUS 0x07 /* status register */ 78#define ATA_S_ERROR 0x01 /* error */ 79#define ATA_S_INDEX 0x02 /* index */ 80#define ATA_S_CORR 0x04 /* data corrected */ 81#define ATA_S_DRQ 0x08 /* data request */ 82#define ATA_S_DSC 0x10 /* drive seek completed */ 83#define ATA_S_SERVICE 0x10 /* drive needs service */ 84#define ATA_S_DWF 0x20 /* drive write fault */ 85#define ATA_S_DMA 0x20 /* DMA ready */ 86#define ATA_S_READY 0x40 /* drive ready */ 87#define ATA_S_BUSY 0x80 /* busy */ 88
|
89#define ATA_ALTPORT 0x206 /* alternate Status register */
|
89#define ATA_ALTPORT 0x206 /* alternate status register */ 90#define ATA_ALTPORT_PCCARD 0x8 /* ditto on PCCARD devices */ |
91#define ATA_A_IDS 0x02 /* disable interrupts */ 92#define ATA_A_RESET 0x04 /* RESET controller */ 93#define ATA_A_4BIT 0x08 /* 4 head bits */ 94
|
95#define ATA_ALTIOSIZE 0x01 96 |
97/* misc defines */ 98#define ATA_MASTER 0x00 99#define ATA_SLAVE 0x10 100#define ATA_IOSIZE 0x08 101#define ATA_OP_FINISHED 0x00 102#define ATA_OP_CONTINUES 0x01 103#define ATA_DEV(unit) ((unit == ATA_MASTER) ? 0 : 1) 104#define ATA_PARAM(scp, unit) scp->dev_param[ATA_DEV(unit)] 105 106 107/* busmaster DMA related defines */ 108#define ATA_BM_OFFSET1 0x08 109#define ATA_DMA_ENTRIES 256 110#define ATA_DMA_EOT 0x80000000 111 112#define ATA_BMCMD_PORT 0x00 113#define ATA_BMCMD_START_STOP 0x01 114#define ATA_BMCMD_WRITE_READ 0x08 115 116#define ATA_BMSTAT_PORT 0x02 117#define ATA_BMSTAT_ACTIVE 0x01 118#define ATA_BMSTAT_ERROR 0x02 119#define ATA_BMSTAT_INTERRUPT 0x04 120#define ATA_BMSTAT_MASK 0x07 121#define ATA_BMSTAT_DMA_MASTER 0x20 122#define ATA_BMSTAT_DMA_SLAVE 0x40 123#define ATA_BMSTAT_DMA_SIMPLEX 0x80 124 125#define ATA_BMDTP_PORT 0x04 126
|
127#define ATA_BMIOSIZE 0x20 128 |
129/* structure for holding DMA address data */ 130struct ata_dmaentry { 131 u_int32_t base; 132 u_int32_t count; 133}; 134 135/* ATA/ATAPI device parameter information */ 136struct ata_params { 137 u_int8_t cmdsize :2; /* packet command size */ 138#define ATAPI_PSIZE_12 0 /* 12 bytes */ 139#define ATAPI_PSIZE_16 1 /* 16 bytes */ 140 141 u_int8_t :3; 142 u_int8_t drqtype :2; /* DRQ type */ 143#define ATAPI_DRQT_MPROC 0 /* cpu 3 ms delay */ 144#define ATAPI_DRQT_INTR 1 /* intr 10 ms delay */ 145#define ATAPI_DRQT_ACCEL 2 /* accel 50 us delay */ 146 147 u_int8_t removable :1; /* device is removable */ 148 u_int8_t device_type :5; /* device type */ 149#define ATAPI_TYPE_DIRECT 0 /* disk/floppy */ 150#define ATAPI_TYPE_TAPE 1 /* streaming tape */ 151#define ATAPI_TYPE_CDROM 5 /* CD-ROM device */ 152#define ATAPI_TYPE_OPTICAL 7 /* optical disk */ 153 154 u_int8_t :1; 155 u_int8_t proto :2; /* command protocol */ 156#define ATAPI_PROTO_ATAPI 2 157 158 u_int16_t cylinders; /* number of cylinders */ 159 int16_t reserved2; 160 u_int16_t heads; /* # heads */ 161 int16_t unfbytespertrk; /* # unformatted bytes/track */ 162 int16_t unfbytes; /* # unformatted bytes/sector */ 163 u_int16_t sectors; /* # sectors/track */ 164 int16_t vendorunique0[3]; 165 int8_t serial[20]; /* serial number */ 166 int16_t buffertype; /* buffer type */ 167#define ATA_BT_SINGLEPORTSECTOR 1 /* 1 port, 1 sector buffer */ 168#define ATA_BT_DUALPORTMULTI 2 /* 2 port, mult sector buffer */ 169#define ATA_BT_DUALPORTMULTICACHE 3 /* above plus track cache */ 170 171 int16_t buffersize; /* buf size, 512-byte units */ 172 int16_t necc; /* ecc bytes appended */ 173 int8_t revision[8]; /* firmware revision */ 174 int8_t model[40]; /* model name */ 175 int8_t nsecperint; /* sectors per interrupt */ 176 int8_t vendorunique1; 177 int16_t usedmovsd; /* double word read/write? */ 178 179 u_int8_t vendorcap; /* vendor capabilities */ 180 u_int8_t dmaflag :1; /* DMA supported - always 1 */ 181 u_int8_t lbaflag :1; /* LBA supported - always 1 */ 182 u_int8_t iordydis :1; /* IORDY may be disabled */ 183 u_int8_t iordyflag :1; /* IORDY supported */ 184 u_int8_t softreset :1; /* needs softreset when busy */ 185 u_int8_t stdby_ovlap :1; /* standby/overlap supported */ 186 u_int8_t queuing :1; /* supports queuing overlap */ 187 u_int8_t idmaflag :1; /* interleaved DMA supported */ 188 int16_t capvalidate; /* validation for above */ 189 190 int8_t vendorunique3; 191 int8_t opiomode; /* PIO modes 0-2 */ 192 int8_t vendorunique4; 193 int8_t odmamode; /* old DMA modes, not ATA-3 */ 194 195 int16_t atavalid; /* fields valid */ 196#define ATA_FLAG_54_58 1 /* words 54-58 valid */ 197#define ATA_FLAG_64_70 2 /* words 64-70 valid */ 198#define ATA_FLAG_88 4 /* word 88 valid */ 199 200 int16_t currcyls; 201 int16_t currheads; 202 int16_t currsectors; 203 int16_t currsize0; 204 int16_t currsize1; 205 int8_t currmultsect; 206 int8_t multsectvalid; 207 int32_t lbasize; 208 209 int16_t sdmamodes; /* singleword DMA modes */ 210 int16_t wdmamodes; /* multiword DMA modes */ 211 int16_t apiomodes; /* advanced PIO modes */ 212 213 u_int16_t mwdmamin; /* min. M/W DMA time/word ns */ 214 u_int16_t mwdmarec; /* rec. M/W DMA time ns */ 215 u_int16_t pioblind; /* min. PIO cycle w/o flow */ 216 u_int16_t pioiordy; /* min. PIO cycle IORDY flow */ 217 218 int16_t reserved69; 219 int16_t reserved70; 220 u_int16_t rlsovlap; /* rel time (us) for overlap */ 221 u_int16_t rlsservice; /* rel time (us) for service */ 222 int16_t reserved73; 223 int16_t reserved74; 224 int16_t queuelen; 225 int16_t reserved76; 226 int16_t reserved77; 227 int16_t reserved78; 228 int16_t reserved79; 229 int16_t versmajor; 230 int16_t versminor; 231 int16_t featsupp1; 232 int16_t featsupp2; 233 int16_t featsupp3; 234 int16_t featenab1; 235 int16_t featenab2; 236 int16_t featenab3; 237 int16_t udmamodes; /* UltraDMA modes */ 238 int16_t erasetime; 239 int16_t enherasetime; 240 int16_t apmlevel; 241 int16_t masterpasswdrev; 242 u_int16_t masterhwres :8; 243 u_int16_t slavehwres :5; 244 u_int16_t cblid :1; 245 u_int16_t reserved93_1415 :2; 246 int16_t reserved94[32]; 247 int16_t rmvstat; 248 int16_t securstat; 249 int16_t reserved129[30]; 250 int16_t cfapwrmode; 251 int16_t reserved161[84]; 252 int16_t integrity; 253}; 254 255/* structure describing an ATA device */ 256struct ata_softc {
|
252 int32_t unit; /* unit on this controller */
253 int32_t lun; /* logical unit # */
|
257 struct device *dev; /* device handle */
|
255 int32_t ioaddr; /* port addr */
256 int32_t altioaddr; /* alternate port addr */
257 int32_t bmaddr; /* bus master DMA port */
|
258 int32_t unit; /* unit on this controller */ 259 struct resource *r_io; /* io addr resource handle */ 260 struct resource *r_altio; /* altio addr resource handle */ 261 struct resource *r_bmio; /* bmio addr resource handle */ 262 struct resource *r_irq; /* interrupt of this channel */ 263 int32_t ioaddr; /* physical port addr */ 264 int32_t altioaddr; /* physical alt port addr */ 265 int32_t bmaddr; /* physical bus master port */ |
266 int32_t chiptype; /* pciid of controller chip */ 267 struct ata_params *dev_param[2]; /* ptr to devices params */ 268 void *dev_softc[2]; /* ptr to devices softc's */ 269 struct ata_dmaentry *dmatab[2]; /* DMA transfer tables */ 270 int32_t mode[2]; /* transfer mode for devices */ 271#define ATA_PIO 0x00 272#define ATA_PIO0 0x08 273#define ATA_PIO1 0x09 274#define ATA_PIO2 0x0a 275#define ATA_PIO3 0x0b 276#define ATA_PIO4 0x0c 277#define ATA_DMA 0x10 278#define ATA_WDMA2 0x22 279#define ATA_UDMA2 0x42 280#define ATA_UDMA4 0x44 281 282 int32_t flags; /* controller flags */ 283#define ATA_DMA_ACTIVE 0x01 284#define ATA_ATAPI_DMA_RO 0x02 285#define ATA_USE_16BIT 0x04
|
286#define ATA_ATTACHED 0x08 |
287 288 int32_t devices; /* what is present */ 289#define ATA_ATA_MASTER 0x01 290#define ATA_ATA_SLAVE 0x02 291#define ATA_ATAPI_MASTER 0x04 292#define ATA_ATAPI_SLAVE 0x08 293 294 u_int8_t status; /* last controller status */ 295 u_int8_t error; /* last controller error */ 296 int32_t active; /* active processing request */ 297#define ATA_IDLE 0x0 298#define ATA_IMMEDIATE 0x1 299#define ATA_WAIT_INTR 0x2 300#define ATA_WAIT_READY 0x3 301#define ATA_ACTIVE 0x4 302#define ATA_ACTIVE_ATA 0x5 303#define ATA_ACTIVE_ATAPI 0x6 304#define ATA_REINITING 0x7 305 306 TAILQ_HEAD(, ad_request) ata_queue; /* head of ATA queue */ 307 TAILQ_HEAD(, atapi_request) atapi_queue; /* head of ATAPI queue */ 308 void *running; /* currently running request */
|
300#if NAPM > 0
301 struct apmhook resume_hook; /* hook for apm */
302#endif
303
|
309}; 310
|
306/* array to hold all ata softc's */
307extern struct ata_softc *atadevices[];
308#define MAXATA 16
|
311/* To convert unit numbers to devices */ 312extern devclass_t ata_devclass; |
313 314/* public prototypes */ 315void ata_start(struct ata_softc *); 316void ata_reset(struct ata_softc *, int32_t *); 317int32_t ata_reinit(struct ata_softc *); 318int32_t ata_wait(struct ata_softc *, int32_t, u_int8_t); 319int32_t ata_command(struct ata_softc *, int32_t, u_int32_t, u_int32_t, u_int32_t, u_int32_t, u_int32_t, u_int32_t, int32_t);
|
320int ata_printf(struct ata_softc *, int32_t, const char *, ...) __printflike(3, 4); 321int ata_get_lun(u_int32_t *); 322void ata_free_lun(u_int32_t *, int); 323int8_t *ata_mode2str(int32_t); 324int8_t ata_pio2mode(int32_t); 325int ata_pmode(struct ata_params *); 326int ata_wmode(struct ata_params *); 327int ata_umode(struct ata_params *); 328 |
329void ata_dmainit(struct ata_softc *, int32_t, int32_t, int32_t, int32_t); 330int32_t ata_dmasetup(struct ata_softc *, int32_t, int8_t *, int32_t, int32_t); 331void ata_dmastart(struct ata_softc *); 332int32_t ata_dmastatus(struct ata_softc *); 333int32_t ata_dmadone(struct ata_softc *);
|
321int32_t ata_pmode(struct ata_params *);
322int32_t ata_wmode(struct ata_params *);
323int32_t ata_umode(struct ata_params *);
324int8_t *ata_mode2str(int32_t);
325int8_t ata_pio2mode(int32_t);
326int32_t ata_find_dev(device_t, int32_t);
327int32_t ata_printf(struct ata_softc *, int32_t, const char *, ...) __printflike(3, 4);
|
|