29 */ 30 31#include "ata.h" 32#include "isa.h" 33#include "card.h" 34#include "pci.h" 35#include "atadisk.h" 36#include "atapicd.h" 37#include "atapifd.h" 38#include "atapist.h" 39#include "opt_global.h" 40#include "opt_ata.h" 41#include <sys/param.h> 42#include <sys/systm.h> 43#include <sys/kernel.h> 44#include <sys/disk.h> 45#include <sys/module.h> 46#include <sys/bus.h> 47#include <sys/bio.h> 48#include <sys/malloc.h> 49#include <sys/devicestat.h> 50#include <sys/sysctl.h> 51#include <machine/stdarg.h> 52#include <vm/vm.h> 53#include <vm/pmap.h> 54#include <machine/resource.h> 55#include <machine/bus.h> 56#include <sys/rman.h> 57#if NPCI > 0 58#include <pci/pcivar.h> 59#include <pci/pcireg.h> 60#endif 61#include <isa/isavar.h> 62#include <isa/isareg.h> 63#include <machine/clock.h> 64#ifdef __i386__ 65#include <machine/smp.h> 66#include <i386/isa/intr_machdep.h> 67#endif 68#ifdef __alpha__ 69#include <machine/md_var.h> 70#endif 71#include <dev/ata/ata-all.h> 72#include <dev/ata/ata-disk.h> 73#include <dev/ata/atapi-all.h> 74 75/* misc defines */ 76#define IOMASK 0xfffffffc 77#define ATA_IOADDR_RID 0 78#define ATA_ALTADDR_RID 1 79#define ATA_BMADDR_RID 2 80 81/* prototypes */ 82static int ata_probe(device_t); 83static int ata_attach(device_t); 84static int ata_detach(device_t); 85static int ata_resume(device_t); 86static void ata_boot_attach(void); 87static void ata_intr(void *); 88static int32_t ata_getparam(struct ata_softc *, int32_t, u_int8_t); 89static int8_t *active2str(int32_t); 90static void bswap(int8_t *, int32_t); 91static void btrim(int8_t *, int32_t); 92static void bpack(int8_t *, int8_t *, int32_t); 93 94/* local vars */ 95static devclass_t ata_devclass; 96static devclass_t ata_pci_devclass; 97static struct intr_config_hook *ata_delayed_attach = NULL; 98static char ata_conf[256]; 99MALLOC_DEFINE(M_ATA, "ATA generic", "ATA driver generic layer"); 100 101#if NISA > 0 102static struct isa_pnp_id ata_ids[] = { 103 {0x0006d041, "Generic ESDI/IDE/ATA controller"}, /* PNP0600 */ 104 {0x0106d041, "Plus Hardcard II"}, /* PNP0601 */ 105 {0x0206d041, "Plus Hardcard IIXL/EZ"}, /* PNP0602 */ 106 {0x0306d041, "Generic ATA"}, /* PNP0603 */ 107 {0} 108}; 109 110static int 111ata_isa_probe(device_t dev) 112{ 113 struct ata_softc *scp = device_get_softc(dev); 114 struct resource *port; 115 int rid; 116 u_long tmp; 117 118 /* check isapnp ids */ 119 if (ISA_PNP_PROBE(device_get_parent(dev), dev, ata_ids) == ENXIO) 120 return ENXIO; 121 122 /* allocate the port range */ 123 rid = ATA_IOADDR_RID; 124 port = bus_alloc_resource(dev, SYS_RES_IOPORT, &rid, 0, ~0, 125 ATA_IOSIZE, RF_ACTIVE); 126 if (!port) 127 return ENOMEM; 128 129 /* alloctate the altport range */ 130 if (bus_get_resource(dev, SYS_RES_IOPORT, 1, &tmp, &tmp)) { 131 bus_set_resource(dev, SYS_RES_IOPORT, 1, 132 rman_get_start(port) + ATA_ALTPORT, 133 ATA_ALTIOSIZE); 134 } 135 bus_release_resource(dev, SYS_RES_IOPORT, 0, port); 136 scp->unit = device_get_unit(dev); 137 scp->flags |= ATA_USE_16BIT; 138 return ata_probe(dev); 139} 140 141static device_method_t ata_isa_methods[] = { 142 /* device interface */ 143 DEVMETHOD(device_probe, ata_isa_probe), 144 DEVMETHOD(device_attach, ata_attach), 145 DEVMETHOD(device_resume, ata_resume), 146 { 0, 0 } 147}; 148 149static driver_t ata_isa_driver = { 150 "ata", 151 ata_isa_methods, 152 sizeof(struct ata_softc), 153}; 154 155DRIVER_MODULE(ata, isa, ata_isa_driver, ata_devclass, 0, 0); 156#endif 157 158#if NCARD > 0 159static int 160ata_pccard_probe(device_t dev) 161{ 162 struct ata_softc *scp = device_get_softc(dev); 163 struct resource *port; 164 int rid, len; 165 166 /* allocate the port range */ 167 rid = ATA_IOADDR_RID; 168 len = bus_get_resource_count(dev, SYS_RES_IOPORT, rid); 169 port = bus_alloc_resource(dev, SYS_RES_IOPORT, &rid, 0, ~0, len, RF_ACTIVE); 170 if (!port) 171 return ENOMEM; 172 173 /* 174 * if we got more than the default ATA_IOSIZE ports, this is likely 175 * a pccard system where the altio ports are located just after the 176 * normal io ports, so no need to allocate them. 177 */ 178 if (len <= ATA_IOSIZE) { 179 bus_set_resource(dev, SYS_RES_IOPORT, ATA_ALTADDR_RID, 180 rman_get_start(port) + ATA_ALTPORT, ATA_ALTIOSIZE); 181 } 182 bus_release_resource(dev, SYS_RES_IOPORT, 0, port); 183 scp->unit = device_get_unit(dev); 184 scp->flags |= ATA_USE_16BIT; 185 return ata_probe(dev); 186} 187 188static device_method_t ata_pccard_methods[] = { 189 /* device interface */ 190 DEVMETHOD(device_probe, ata_pccard_probe), 191 DEVMETHOD(device_attach, ata_attach), 192 DEVMETHOD(device_detach, ata_detach), 193 { 0, 0 } 194}; 195 196static driver_t ata_pccard_driver = { 197 "ata", 198 ata_pccard_methods, 199 sizeof(struct ata_softc), 200}; 201 202DRIVER_MODULE(ata, pccard, ata_pccard_driver, ata_devclass, 0, 0); 203#endif 204 205#if NPCI > 0 206struct ata_pci_softc { 207 struct resource *bmio; 208 struct resource bmio_1; 209 struct resource bmio_2; 210 struct resource *irq; 211 int32_t irqcnt; 212}; 213 214int32_t 215ata_find_dev(device_t dev, int32_t type, int32_t revid) 216{ 217 device_t *children, child; 218 int nchildren, i; 219 220 if (device_get_children(device_get_parent(dev), &children, &nchildren)) 221 return 0; 222 223 for (i = 0; i < nchildren; i++) { 224 child = children[i]; 225 226 /* check that it's on the same silicon and the device we want */ 227 if (pci_get_slot(dev) == pci_get_slot(child) && 228 pci_get_vendor(child) == (type & 0xffff) && 229 pci_get_device(child) == ((type & 0xffff0000) >> 16) && 230 pci_get_revid(child) >= revid) { 231 free(children, M_TEMP); 232 return 1; 233 } 234 } 235 free(children, M_TEMP); 236 return 0; 237} 238 239static const char * 240ata_pci_match(device_t dev) 241{ 242 if (pci_get_class(dev) != PCIC_STORAGE) 243 return NULL; 244 245 switch (pci_get_devid(dev)) { 246 /* supported chipsets */ 247 case 0x12308086: 248 return "Intel PIIX ATA controller"; 249 250 case 0x70108086: 251 return "Intel PIIX3 ATA controller"; 252 253 case 0x71118086: 254 case 0x71998086: 255 return "Intel PIIX4 ATA33 controller"; 256 257 case 0x24118086: 258 return "Intel ICH ATA66 controller"; 259 260 case 0x24218086: 261 return "Intel ICH0 ATA33 controller"; 262 263 case 0x522910b9: 264 return "AcerLabs Aladdin ATA33 controller"; 265 266 case 0x05711106: 267 if (ata_find_dev(dev, 0x05861106, 0)) 268 return "VIA 82C586 ATA33 controller"; 269 if (ata_find_dev(dev, 0x05961106, 0x12)) 270 return "VIA 82C596B ATA66 controller"; 271 if (ata_find_dev(dev, 0x05961106, 0)) 272 return "VIA 82C596 ATA33 controller"; 273 if (ata_find_dev(dev, 0x06861106, 0)) 274 return "VIA 82C686 ATA66 controller"; 275 return "VIA Apollo ATA controller"; 276 277 case 0x55131039: 278 return "SiS 5591 ATA33 controller"; 279 280 case 0x06461095: 281 return "CMD 646 ATA controller"; 282 283 case 0xc6931080: 284 if (pci_get_subclass(dev) == PCIS_STORAGE_IDE) 285 return "Cypress 82C693 ATA controller"; 286 break; 287 288 case 0x74091022: 289 return "AMD 756 ATA66 controller"; 290 291 case 0x4d33105a: 292 return "Promise ATA33 controller"; 293 294 case 0x4d38105a: 295 return "Promise ATA66 controller"; 296 297 case 0x00041103: 298 return "HighPoint HPT366 ATA66 controller"; 299 300 /* unsupported but known chipsets, generic DMA only */ 301 case 0x10001042: 302 case 0x10011042: 303 return "RZ 100? ATA controller !WARNING! buggy chip data loss possible"; 304 305 case 0x06401095: 306 return "CMD 640 ATA controller !WARNING! buggy chip data loss possible"; 307 308 case 0x01021078: 309 return "Cyrix 5530 ATA controller (generic mode)"; 310 311 /* unknown chipsets, try generic DMA if it seems possible */ 312 default: 313 if (pci_get_class(dev) == PCIC_STORAGE && 314 (pci_get_subclass(dev) == PCIS_STORAGE_IDE)) 315 return "Unknown PCI ATA controller (generic mode)"; 316 } 317 return NULL; 318} 319 320static int 321ata_pci_probe(device_t dev) 322{ 323 const char *desc = ata_pci_match(dev); 324 325 if (desc) { 326 device_set_desc(dev, desc); 327 return 0; 328 } 329 else 330 return ENXIO; 331} 332 333static int 334ata_pci_add_child(device_t dev, int unit) 335{ 336 device_t child; 337 338 /* check if this is located at one of the std addresses */ 339 if (pci_get_progif(dev) & PCIP_STORAGE_IDE_MASTERDEV) { 340 if (!(child = device_add_child(dev, "ata", unit))) 341 return ENOMEM; 342 } 343 else { 344 if (!(child = device_add_child(dev, "ata", 2))) 345 return ENOMEM; 346 } 347 device_set_ivars(child, (void *)(uintptr_t) unit); 348 return 0; 349} 350 351static int 352ata_pci_attach(device_t dev) 353{ 354 struct ata_pci_softc *sc = device_get_softc(dev); 355 u_int8_t class, subclass; 356 u_int32_t type, cmd; 357 int rid; 358 359 /* set up vendor-specific stuff */ 360 type = pci_get_devid(dev); 361 class = pci_get_class(dev); 362 subclass = pci_get_subclass(dev); 363 cmd = pci_read_config(dev, PCIR_COMMAND, 4); 364 365 /* is this controller busmaster DMA capable ? */ 366 if (pci_get_progif(dev) & PCIP_STORAGE_IDE_MASTERDEV) { 367 /* is busmastering support turned on ? */ 368 if ((cmd & (PCIM_CMD_PORTEN | PCIM_CMD_BUSMASTEREN)) == 369 (PCIM_CMD_PORTEN | PCIM_CMD_BUSMASTEREN)) { 370 371 /* is there a valid port range to connect to ? */ 372 rid = 0x20; 373 sc->bmio = bus_alloc_resource(dev, SYS_RES_IOPORT, &rid, 374 0, ~0, 1, RF_ACTIVE); 375 if (!sc->bmio) 376 device_printf(dev, "Busmastering DMA not configured\n"); 377 } 378 else 379 device_printf(dev, "Busmastering DMA not enabled\n"); 380 } 381 else { 382 if (type == 0x4d33105a || type == 0x4d38105a || type == 0x00041103) { 383 /* Promise and HPT366 controllers support busmastering DMA */ 384 rid = 0x20; 385 sc->bmio = bus_alloc_resource(dev, SYS_RES_IOPORT, &rid, 386 0, ~0, 1, RF_ACTIVE); 387 } 388 else 389 /* we dont know this controller, no busmastering DMA */ 390 device_printf(dev, "Busmastering DMA not supported\n"); 391 } 392 393 /* do extra chipset specific setups */ 394 switch (type) { 395 case 0x522910b9: /* Aladdin need to activate the ATAPI FIFO */ 396 pci_write_config(dev, 0x53, 397 (pci_read_config(dev, 0x53, 1) & ~0x01) | 0x02, 1); 398 break; 399 400 case 0x4d38105a: /* Promise 66's need their clock changed */ 401 outb(rman_get_start(sc->bmio) + 0x11, 402 inb(rman_get_start(sc->bmio) + 0x11) | 0x0a); 403 /* FALLTHROUGH */ 404 405 case 0x4d33105a: /* Promise's need burst mode to be turned on */ 406 outb(rman_get_start(sc->bmio) + 0x1f, 407 inb(rman_get_start(sc->bmio) + 0x1f) | 0x01); 408 break; 409 410 case 0x00041103: /* HPT366 turn of fast interrupt prediction */ 411 pci_write_config(dev, 0x51, (pci_read_config(dev, 0x51, 1) & ~0x80), 1); 412 break; 413 414 case 0x05711106: 415 case 0x74091022: /* VIA 82C586, 82C596, 82C686 & AMD 756 default setup */ 416 /* set prefetch, postwrite */ 417 pci_write_config(dev, 0x41, pci_read_config(dev, 0x41, 1) | 0xf0, 1); 418 419 /* set fifo configuration half'n'half */ 420 pci_write_config(dev, 0x43, 421 (pci_read_config(dev, 0x43, 1) & 0x90) | 0x2a, 1); 422 423 /* set status register read retry */ 424 pci_write_config(dev, 0x44, pci_read_config(dev, 0x44, 1) | 0x08, 1); 425 426 /* set DMA read & end-of-sector fifo flush */ 427 pci_write_config(dev, 0x46, 428 (pci_read_config(dev, 0x46, 1) & 0x0c) | 0xf0, 1); 429 430 /* set sector size */ 431 pci_write_config(dev, 0x60, DEV_BSIZE, 2); 432 pci_write_config(dev, 0x68, DEV_BSIZE, 2); 433 434 /* prepare for ATA-66 on the 82C686 and rev 0x12 and newer 82C596's */ 435 if (ata_find_dev(dev, 0x06861106, 0) || 436 ata_find_dev(dev, 0x05961106, 0x12)) { 437 pci_write_config(dev, 0x50, 438 pci_read_config(dev, 0x50, 4) | 0x070f070f, 4); 439 } 440 break; 441 } 442 443 /* 444 * the Cypress chip is a mess, it contains two ATA functions, but 445 * both channels are visible on the first one. 446 * simply ignore the second function for now, as the right 447 * solution (ignoring the second channel on the first function) 448 * doesn't work with the crappy ATA interrupt setup on the alpha. 449 */ 450 if (pci_get_devid(dev) == 0xc6931080 && pci_get_function(dev) > 1) 451 return 0; 452 453 ata_pci_add_child(dev, 0); 454 455 if (pci_get_progif(dev) & PCIP_STORAGE_IDE_MASTERDEV || 456 pci_read_config(dev, 0x18, 4) & IOMASK) 457 ata_pci_add_child(dev, 1); 458 459 return bus_generic_attach(dev); 460} 461 462static int 463ata_pci_print_child(device_t dev, device_t child) 464{ 465 struct ata_softc *scp = device_get_softc(child); 466 int unit = (uintptr_t) device_get_ivars(child); 467 int retval = 0; 468 469 retval += bus_print_child_header(dev, child); 470 retval += printf(": at 0x%x", scp->ioaddr); 471 472 if (pci_get_progif(dev) & PCIP_STORAGE_IDE_MASTERDEV) 473 retval += printf(" irq %d", 14 + unit); 474 475 retval += bus_print_child_footer(dev, child); 476 477 return retval; 478} 479 480static struct resource * 481ata_pci_alloc_resource(device_t dev, device_t child, int type, int *rid, 482 u_long start, u_long end, u_long count, u_int flags) 483{ 484 struct ata_pci_softc *sc = device_get_softc(dev); 485 int masterdev = pci_get_progif(dev) & PCIP_STORAGE_IDE_MASTERDEV; 486 int unit = (int)device_get_ivars(child); 487 int myrid; 488 489 if (type == SYS_RES_IOPORT) { 490 switch (*rid) { 491 case ATA_IOADDR_RID: 492 if (masterdev) { 493 myrid = 0; 494 start = (unit == 0 ? IO_WD1 : IO_WD2); 495 end = start + ATA_IOSIZE - 1; 496 count = ATA_IOSIZE; 497 } 498 else 499 myrid = 0x10 + 8 * unit; 500 break; 501 502 case ATA_ALTADDR_RID: 503 if (masterdev) { 504 myrid = 0; 505 start = (unit == 0 ? IO_WD1 : IO_WD2) + ATA_ALTPORT; 506 end = start + ATA_ALTIOSIZE - 1; 507 count = ATA_ALTIOSIZE; 508 } 509 else 510 myrid = 0x14 + 8 * unit; 511 break; 512 513 case ATA_BMADDR_RID: 514 /* the busmaster resource is shared between the two channels */ 515 if (sc->bmio) { 516 if (unit == 0) { 517 sc->bmio_1 = *sc->bmio; 518 sc->bmio_1.r_end = sc->bmio->r_start + ATA_BM_OFFSET1; 519 return &sc->bmio_1; 520 } else { 521 sc->bmio_2 = *sc->bmio; 522 sc->bmio_2.r_start = sc->bmio->r_start + ATA_BM_OFFSET1; 523 sc->bmio_2.r_end = sc->bmio_2.r_start + ATA_BM_OFFSET1; 524 return &sc->bmio_2; 525 } 526 } 527 break; 528 529 default: 530 return 0; 531 } 532 533 if (masterdev) 534 /* make the parent just pass through the allocation. */ 535 return BUS_ALLOC_RESOURCE(device_get_parent(dev), child, 536 SYS_RES_IOPORT, &myrid, 537 start, end, count, flags); 538 else 539 /* we are using the parent resource directly. */ 540 return BUS_ALLOC_RESOURCE(device_get_parent(dev), dev, 541 SYS_RES_IOPORT, &myrid, 542 start, end, count, flags); 543 } 544 545 if (type == SYS_RES_IRQ) { 546 if (*rid != 0) 547 return 0; 548 549 if (masterdev) { 550#ifdef __i386__ 551 int irq = (unit == 0 ? 14 : 15); 552 553 return BUS_ALLOC_RESOURCE(device_get_parent(dev), child, 554 SYS_RES_IRQ, rid, 555 irq, irq, 1, flags & ~RF_SHAREABLE); 556#else 557 return alpha_platform_alloc_ide_intr(unit); 558#endif 559 } else { 560 /* primary and secondary channels share the same interrupt */ 561 sc->irqcnt++; 562 if (!sc->irq) 563 sc->irq = BUS_ALLOC_RESOURCE(device_get_parent(dev), dev, 564 SYS_RES_IRQ, rid, 0, ~0, 1, flags); 565 return sc->irq; 566 } 567 } 568 return 0; 569} 570 571static int 572ata_pci_release_resource(device_t dev, device_t child, int type, int rid, 573 struct resource *r) 574{ 575 struct ata_pci_softc *sc = device_get_softc(dev); 576 int unit = (uintptr_t) device_get_ivars(child); 577 int masterdev = pci_get_progif(dev) & PCIP_STORAGE_IDE_MASTERDEV; 578 int myrid = 0; 579 580 if (type == SYS_RES_IOPORT) { 581 switch (rid) { 582 case ATA_IOADDR_RID: 583 if (masterdev) 584 myrid = 0; 585 else 586 myrid = 0x10 + 8 * unit; 587 break; 588 589 case ATA_ALTADDR_RID: 590 if (masterdev) 591 myrid = 0; 592 else 593 myrid = 0x14 + 8 * unit; 594 break; 595 596 case ATA_BMADDR_RID: 597 return 0; 598 599 default: 600 return ENOENT; 601 } 602 603 if (masterdev) 604 /* make the parent just pass through the allocation. */ 605 return BUS_RELEASE_RESOURCE(device_get_parent(dev), child, 606 SYS_RES_IOPORT, myrid, r); 607 else 608 /* we are using the parent resource directly. */ 609 return BUS_RELEASE_RESOURCE(device_get_parent(dev), dev, 610 SYS_RES_IOPORT, myrid, r); 611 } 612 if (type == SYS_RES_IRQ) { 613 if (rid != 0) 614 return ENOENT; 615 616 if (masterdev) { 617#ifdef __i386__ 618 return BUS_RELEASE_RESOURCE(device_get_parent(dev), 619 child, SYS_RES_IRQ, rid, r); 620#else 621 return alpha_platform_release_ide_intr(unit, r); 622#endif 623 } 624 else { 625 if (--sc->irqcnt) 626 return 0; 627 628 return BUS_RELEASE_RESOURCE(device_get_parent(dev), 629 dev, SYS_RES_IRQ, rid, r); 630 } 631 } 632 return EINVAL; 633} 634 635static int 636ata_pci_setup_intr(device_t dev, device_t child, struct resource *irq, 637 int flags, driver_intr_t *intr, void *arg, 638 void **cookiep) 639{ 640 if (pci_get_progif(dev) & PCIP_STORAGE_IDE_MASTERDEV) { 641#ifdef __i386__ 642 return BUS_SETUP_INTR(device_get_parent(dev), child, irq, 643 flags, intr, arg, cookiep); 644#else 645 return alpha_platform_setup_ide_intr(irq, intr, arg, cookiep); 646#endif 647 } 648 else 649 return BUS_SETUP_INTR(device_get_parent(dev), dev, irq, 650 flags, intr, arg, cookiep); 651} 652 653static int 654ata_pci_teardown_intr(device_t dev, device_t child, struct resource *irq, 655 void *cookie) 656{ 657 if (pci_get_progif(dev) & PCIP_STORAGE_IDE_MASTERDEV) { 658#ifdef __i386__ 659 return BUS_TEARDOWN_INTR(device_get_parent(dev), child, irq, cookie); 660#else 661 return alpha_platform_teardown_ide_intr(irq, cookie); 662#endif 663 } 664 else 665 return BUS_TEARDOWN_INTR(device_get_parent(dev), dev, irq, cookie); 666} 667 668static device_method_t ata_pci_methods[] = { 669 /* device interface */ 670 DEVMETHOD(device_probe, ata_pci_probe), 671 DEVMETHOD(device_attach, ata_pci_attach), 672 DEVMETHOD(device_shutdown, bus_generic_shutdown), 673 DEVMETHOD(device_suspend, bus_generic_suspend), 674 DEVMETHOD(device_resume, bus_generic_resume), 675 676 /* bus methods */ 677 DEVMETHOD(bus_print_child, ata_pci_print_child), 678 DEVMETHOD(bus_alloc_resource, ata_pci_alloc_resource), 679 DEVMETHOD(bus_release_resource, ata_pci_release_resource), 680 DEVMETHOD(bus_activate_resource, bus_generic_activate_resource), 681 DEVMETHOD(bus_deactivate_resource, bus_generic_deactivate_resource), 682 DEVMETHOD(bus_setup_intr, ata_pci_setup_intr), 683 DEVMETHOD(bus_teardown_intr, ata_pci_teardown_intr), 684 { 0, 0 } 685}; 686 687static driver_t ata_pci_driver = { 688 "atapci", 689 ata_pci_methods, 690 sizeof(struct ata_pci_softc), 691}; 692 693DRIVER_MODULE(atapci, pci, ata_pci_driver, ata_pci_devclass, 0, 0); 694 695static int 696ata_pcisub_probe(device_t dev) 697{ 698 struct ata_softc *scp = device_get_softc(dev); 699 700 /* kids of pci ata chipsets has their physical unit number in ivars */ 701 scp->unit = (uintptr_t) device_get_ivars(dev); 702 703 /* set the chiptype to the hostchip ID, makes life easier */ 704 if (ata_find_dev(device_get_parent(dev), 0x05861106, 0)) 705 scp->chiptype = 0x05861106; 706 else if (ata_find_dev(device_get_parent(dev), 0x05961106, 0)) 707 scp->chiptype = 0x05961106; 708 else if (ata_find_dev(device_get_parent(dev), 0x06861106, 0)) 709 scp->chiptype = 0x06861106; 710 else 711 scp->chiptype = pci_get_devid(device_get_parent(dev)); 712 return ata_probe(dev); 713} 714 715static device_method_t ata_pcisub_methods[] = { 716 /* device interface */ 717 DEVMETHOD(device_probe, ata_pcisub_probe), 718 DEVMETHOD(device_attach, ata_attach), 719 DEVMETHOD(device_detach, ata_detach), 720 DEVMETHOD(device_resume, ata_resume), 721 { 0, 0 } 722}; 723 724static driver_t ata_pcisub_driver = { 725 "ata", 726 ata_pcisub_methods, 727 sizeof(struct ata_softc), 728}; 729 730DRIVER_MODULE(ata, atapci, ata_pcisub_driver, ata_devclass, 0, 0); 731#endif 732 733static int 734ata_probe(device_t dev) 735{ 736 struct ata_softc *scp = device_get_softc(dev); 737 struct resource *io = 0; 738 struct resource *altio = 0; 739 struct resource *bmio = 0; 740 int rid; 741 int32_t ioaddr, altioaddr, bmaddr; 742 int32_t mask = 0; 743 u_int8_t status0, status1; 744 745 if (!scp || scp->flags & ATA_ATTACHED) 746 return ENXIO; 747 748 /* initialize the softc basics */ 749 scp->active = ATA_IDLE; 750 scp->dev = dev; 751 scp->devices = 0; 752 753 rid = ATA_IOADDR_RID; 754 io = bus_alloc_resource(dev, SYS_RES_IOPORT, &rid, 0, ~0, 755 ATA_IOSIZE, RF_ACTIVE); 756 if (!io) 757 goto failure; 758 ioaddr = rman_get_start(io); 759 760 rid = ATA_ALTADDR_RID; 761 altio = bus_alloc_resource(dev, SYS_RES_IOPORT, &rid, 0, ~0, 762 ATA_ALTIOSIZE, RF_ACTIVE); 763 if (altio) 764 altioaddr = rman_get_start(altio); 765 else 766 altioaddr = ioaddr + ATA_IOSIZE; 767 768 rid = ATA_BMADDR_RID; 769 bmio = bus_alloc_resource(dev, SYS_RES_IOPORT, &rid, 0, ~0, 1, RF_ACTIVE); 770 bmaddr = bmio ? rman_get_start(bmio) : 0; 771 772 /* store the IO resources for eventual later release */ 773 scp->r_io = io; 774 scp->r_altio = altio; 775 scp->r_bmio = bmio; 776 777 /* store the physical IO addresse for easy access */ 778 scp->ioaddr = ioaddr; 779 scp->altioaddr = altioaddr; 780 scp->bmaddr = bmaddr; 781 782 if (bootverbose) 783 ata_printf(scp, -1, "iobase=0x%04x altiobase=0x%04x bmaddr=0x%04x\n", 784 scp->ioaddr, scp->altioaddr, scp->bmaddr); 785 786 /* do we have any signs of ATA/ATAPI HW being present ? */ 787 outb(scp->ioaddr + ATA_DRIVE, ATA_D_IBM | ATA_MASTER); 788 DELAY(1); 789 status0 = inb(scp->ioaddr + ATA_STATUS); 790 outb(scp->ioaddr + ATA_DRIVE, ATA_D_IBM | ATA_SLAVE); 791 DELAY(1); 792 status1 = inb(scp->ioaddr + ATA_STATUS); 793 if ((status0 & 0xf8) != 0xf8 && status0 != 0xa5) 794 mask |= 0x01; 795 if ((status1 & 0xf8) != 0xf8 && status1 != 0xa5) 796 mask |= 0x02; 797 if (bootverbose) 798 ata_printf(scp, -1, "mask=%02x status0=%02x status1=%02x\n", 799 mask, status0, status1); 800 if (!mask) 801 goto failure; 802 803 ata_reset(scp, &mask); 804 if (!mask) 805 goto failure; 806 807 /* 808 * OK, we have at least one device on the chain, check for ATAPI 809 * signatures, if none check if its a good old ATA device. 810 */ 811 outb(scp->ioaddr + ATA_DRIVE, (ATA_D_IBM | ATA_MASTER)); 812 DELAY(1); 813 if (inb(scp->ioaddr + ATA_CYL_LSB) == ATAPI_MAGIC_LSB && 814 inb(scp->ioaddr + ATA_CYL_MSB) == ATAPI_MAGIC_MSB) { 815 scp->devices |= ATA_ATAPI_MASTER; 816 } 817 outb(scp->ioaddr + ATA_DRIVE, (ATA_D_IBM | ATA_SLAVE)); 818 DELAY(1); 819 if (inb(scp->ioaddr + ATA_CYL_LSB) == ATAPI_MAGIC_LSB && 820 inb(scp->ioaddr + ATA_CYL_MSB) == ATAPI_MAGIC_MSB) { 821 scp->devices |= ATA_ATAPI_SLAVE; 822 } 823 if (status0 != 0x00 && !(scp->devices & ATA_ATAPI_MASTER)) { 824 outb(scp->ioaddr + ATA_DRIVE, (ATA_D_IBM | ATA_MASTER)); 825 DELAY(1); 826 outb(scp->ioaddr + ATA_ERROR, 0x58); 827 outb(scp->ioaddr + ATA_CYL_LSB, 0xa5); 828 if (inb(scp->ioaddr + ATA_ERROR) != 0x58 && 829 inb(scp->ioaddr + ATA_CYL_LSB) == 0xa5) { 830 scp->devices |= ATA_ATA_MASTER; 831 } 832 } 833 if (status1 != 0x00 && !(scp->devices & ATA_ATAPI_SLAVE)) { 834 outb(scp->ioaddr + ATA_DRIVE, (ATA_D_IBM | ATA_SLAVE)); 835 DELAY(1); 836 outb(scp->ioaddr + ATA_ERROR, 0x58); 837 outb(scp->ioaddr + ATA_CYL_LSB, 0xa5); 838 if (inb(scp->ioaddr + ATA_ERROR) != 0x58 && 839 inb(scp->ioaddr + ATA_CYL_LSB) == 0xa5) { 840 scp->devices |= ATA_ATA_SLAVE; 841 } 842 } 843 if (bootverbose) 844 ata_printf(scp, -1, "devices = 0x%x\n", scp->devices); 845 if (!scp->devices) { 846 goto failure; 847 } 848 TAILQ_INIT(&scp->ata_queue); 849 TAILQ_INIT(&scp->atapi_queue); 850 return 0; 851 852failure: 853 if (io) 854 bus_release_resource(dev, SYS_RES_IOPORT, ATA_IOADDR_RID, io); 855 if (altio) 856 bus_release_resource(dev, SYS_RES_IOPORT, ATA_ALTADDR_RID, altio); 857 if (bmio) 858 bus_release_resource(dev, SYS_RES_IOPORT, ATA_BMADDR_RID, bmio); 859 if (bootverbose) 860 ata_printf(scp, -1, "probe allocation failed\n"); 861 return ENXIO; 862} 863 864static int 865ata_attach(device_t dev) 866{ 867 struct ata_softc *scp = device_get_softc(dev); 868 int error, rid = 0; 869 870 if (!scp || scp->flags & ATA_ATTACHED) 871 return ENXIO; 872 873 scp->r_irq = bus_alloc_resource(dev, SYS_RES_IRQ, &rid, 0, ~0, 1, 874 RF_SHAREABLE | RF_ACTIVE); 875 if (!scp->r_irq) { 876 ata_printf(scp, -1, "unable to allocate interrupt\n"); 877 return ENXIO; 878 } 879 if ((error = bus_setup_intr(dev, scp->r_irq, INTR_TYPE_BIO, ata_intr, 880 scp, &scp->ih))) 881 return error; 882 883 /* 884 * do not attach devices if we are in early boot, this is done later 885 * when interrupts are enabled by a hook into the boot process. 886 * otherwise attach what the probe has found in scp->devices. 887 */ 888 if (!ata_delayed_attach) { 889 if (scp->devices & ATA_ATA_SLAVE) 890 if (ata_getparam(scp, ATA_SLAVE, ATA_C_ATA_IDENTIFY)) 891 scp->devices &= ~ATA_ATA_SLAVE; 892 if (scp->devices & ATA_ATAPI_SLAVE) 893 if (ata_getparam(scp, ATA_SLAVE, ATA_C_ATAPI_IDENTIFY)) 894 scp->devices &= ~ATA_ATAPI_SLAVE; 895 if (scp->devices & ATA_ATA_MASTER) 896 if (ata_getparam(scp, ATA_MASTER, ATA_C_ATA_IDENTIFY)) 897 scp->devices &= ~ATA_ATA_MASTER; 898 if (scp->devices & ATA_ATAPI_MASTER) 899 if (ata_getparam(scp, ATA_MASTER,ATA_C_ATAPI_IDENTIFY)) 900 scp->devices &= ~ATA_ATAPI_MASTER; 901#if NATADISK > 0 902 if (scp->devices & ATA_ATA_MASTER) 903 ad_attach(scp, ATA_MASTER); 904 if (scp->devices & ATA_ATA_SLAVE) 905 ad_attach(scp, ATA_SLAVE); 906#endif 907#if NATAPICD > 0 || NATAPIFD > 0 || NATAPIST > 0 908 if (scp->devices & ATA_ATAPI_MASTER) 909 atapi_attach(scp, ATA_MASTER); 910 if (scp->devices & ATA_ATAPI_SLAVE) 911 atapi_attach(scp, ATA_SLAVE); 912#endif 913 } 914 scp->flags |= ATA_ATTACHED; 915 return 0; 916} 917 918static int 919ata_detach(device_t dev) 920{ 921 struct ata_softc *scp = device_get_softc(dev); 922 923 if (!scp || !(scp->flags & ATA_ATTACHED)) 924 return ENXIO; 925 926#if NATADISK > 0 927 if (scp->devices & ATA_ATA_MASTER) 928 ad_detach(scp->dev_softc[0]); 929 if (scp->devices & ATA_ATA_SLAVE) 930 ad_detach(scp->dev_softc[1]); 931#endif 932#if NATAPICD > 0 || NATAPIFD > 0 || NATAPIST > 0 933 if (scp->devices & ATA_ATAPI_MASTER) 934 atapi_detach(scp->dev_softc[0]); 935 if (scp->devices & ATA_ATAPI_SLAVE) 936 atapi_detach(scp->dev_softc[1]); 937#endif 938 if (scp->dev_param[ATA_DEV(ATA_MASTER)]) { 939 free(scp->dev_param[ATA_DEV(ATA_MASTER)], M_ATA); 940 scp->dev_param[ATA_DEV(ATA_MASTER)] = NULL; 941 } 942 if (scp->dev_param[ATA_DEV(ATA_SLAVE)]) { 943 free(scp->dev_param[ATA_DEV(ATA_SLAVE)], M_ATA); 944 scp->dev_param[ATA_DEV(ATA_SLAVE)] = NULL; 945 } 946 scp->dev_softc[ATA_DEV(ATA_MASTER)] = NULL; 947 scp->dev_softc[ATA_DEV(ATA_SLAVE)] = NULL; 948 scp->mode[ATA_DEV(ATA_MASTER)] = ATA_PIO; 949 scp->mode[ATA_DEV(ATA_SLAVE)] = ATA_PIO; 950 bus_teardown_intr(dev, scp->r_irq, scp->ih); 951 bus_release_resource(dev, SYS_RES_IRQ, 0, scp->r_irq); 952 if (scp->r_bmio) 953 bus_release_resource(dev, SYS_RES_IOPORT, ATA_BMADDR_RID, scp->r_bmio); 954 if (scp->r_altio) 955 bus_release_resource(dev, SYS_RES_IOPORT, ATA_ALTADDR_RID,scp->r_altio); 956 bus_release_resource(dev, SYS_RES_IOPORT, ATA_IOADDR_RID, scp->r_io); 957 scp->flags &= ~ATA_ATTACHED; 958 return 0; 959} 960 961static int 962ata_resume(device_t dev) 963{ 964 struct ata_softc *scp = device_get_softc(dev); 965 966 ata_reinit(scp); 967 return 0; 968} 969 970static int32_t 971ata_getparam(struct ata_softc *scp, int32_t device, u_int8_t command) 972{ 973 struct ata_params *ata_parm; 974 int8_t buffer[DEV_BSIZE]; 975 int retry = 0; 976 977 /* select drive */ 978 outb(scp->ioaddr + ATA_DRIVE, ATA_D_IBM | device); 979 DELAY(1); 980 981 /* enable interrupt */ 982 outb(scp->altioaddr, ATA_A_4BIT); 983 DELAY(1); 984 985 /* apparently some devices needs this repeated */ 986 do { 987 if (ata_command(scp, device, command, 0, 0, 0, 0, 0, ATA_WAIT_INTR)) { 988 ata_printf(scp, device, "identify failed\n"); 989 return -1; 990 } 991 if (retry++ > 4) { 992 ata_printf(scp, device, "identify retries exceeded\n"); 993 return -1; 994 } 995 } while (ata_wait(scp, device, 996 ((command == ATA_C_ATAPI_IDENTIFY) ? 997 ATA_S_DRQ : (ATA_S_READY | ATA_S_DSC | ATA_S_DRQ)))); 998 999 insw(scp->ioaddr + ATA_DATA, buffer, sizeof(buffer)/sizeof(int16_t)); 1000 ata_parm = malloc(sizeof(struct ata_params), M_ATA, M_NOWAIT); 1001 if (!ata_parm) { 1002 ata_printf(scp, device, "malloc for identify data failed\n"); 1003 return -1; 1004 } 1005 bcopy(buffer, ata_parm, sizeof(struct ata_params)); 1006 if (command == ATA_C_ATA_IDENTIFY || 1007 !((ata_parm->model[0] == 'N' && ata_parm->model[1] == 'E') || 1008 (ata_parm->model[0] == 'F' && ata_parm->model[1] == 'X'))) 1009 bswap(ata_parm->model, sizeof(ata_parm->model)); 1010 btrim(ata_parm->model, sizeof(ata_parm->model)); 1011 bpack(ata_parm->model, ata_parm->model, sizeof(ata_parm->model)); 1012 bswap(ata_parm->revision, sizeof(ata_parm->revision)); 1013 btrim(ata_parm->revision, sizeof(ata_parm->revision)); 1014 bpack(ata_parm->revision, ata_parm->revision, sizeof(ata_parm->revision)); 1015 scp->dev_param[ATA_DEV(device)] = ata_parm; 1016 return 0; 1017} 1018 1019static void 1020ata_boot_attach(void) 1021{ 1022 struct ata_softc *scp; 1023 int32_t ctlr; 1024 1025 /* 1026 * run through all ata devices and look for real ATA & ATAPI devices 1027 * using the hints we found in the early probe, this avoids some of 1028 * the delays probing of non-exsistent devices can cause. 1029 */ 1030 for (ctlr=0; ctlr<devclass_get_maxunit(ata_devclass); ctlr++) { 1031 if (!(scp = devclass_get_softc(ata_devclass, ctlr))) 1032 continue; 1033 if (scp->devices & ATA_ATA_SLAVE) 1034 if (ata_getparam(scp, ATA_SLAVE, ATA_C_ATA_IDENTIFY)) 1035 scp->devices &= ~ATA_ATA_SLAVE; 1036 if (scp->devices & ATA_ATAPI_SLAVE) 1037 if (ata_getparam(scp, ATA_SLAVE, ATA_C_ATAPI_IDENTIFY)) 1038 scp->devices &= ~ATA_ATAPI_SLAVE; 1039 if (scp->devices & ATA_ATA_MASTER) 1040 if (ata_getparam(scp, ATA_MASTER, ATA_C_ATA_IDENTIFY)) 1041 scp->devices &= ~ATA_ATA_MASTER; 1042 if (scp->devices & ATA_ATAPI_MASTER) 1043 if (ata_getparam(scp, ATA_MASTER,ATA_C_ATAPI_IDENTIFY)) 1044 scp->devices &= ~ATA_ATAPI_MASTER; 1045 } 1046 1047#if NATADISK > 0 1048 /* now we know whats there, do the real attach, first the ATA disks */ 1049 for (ctlr=0; ctlr<devclass_get_maxunit(ata_devclass); ctlr++) { 1050 if (!(scp = devclass_get_softc(ata_devclass, ctlr))) 1051 continue; 1052 if (scp->devices & ATA_ATA_MASTER) 1053 ad_attach(scp, ATA_MASTER); 1054 if (scp->devices & ATA_ATA_SLAVE) 1055 ad_attach(scp, ATA_SLAVE); 1056 } 1057#endif 1058#if NATAPICD > 0 || NATAPIFD > 0 || NATAPIST > 0 1059 /* then the atapi devices */ 1060 for (ctlr=0; ctlr<devclass_get_maxunit(ata_devclass); ctlr++) { 1061 if (!(scp = devclass_get_softc(ata_devclass, ctlr))) 1062 continue; 1063 if (scp->devices & ATA_ATAPI_MASTER) 1064 atapi_attach(scp, ATA_MASTER); 1065 if (scp->devices & ATA_ATAPI_SLAVE) 1066 atapi_attach(scp, ATA_SLAVE); 1067 } 1068#endif 1069 if (ata_delayed_attach) { 1070 config_intrhook_disestablish(ata_delayed_attach); 1071 free(ata_delayed_attach, M_ATA); 1072 ata_delayed_attach = NULL; 1073 } 1074} 1075 1076static void 1077ata_intr(void *data) 1078{ 1079 struct ata_softc *scp = (struct ata_softc *)data; 1080 u_int8_t dmastat; 1081 1082 /* 1083 * since we might share the IRQ with another device, and in some 1084 * cases with our twin channel, we only want to process interrupts 1085 * that we know this channel generated. 1086 */ 1087 switch (scp->chiptype) { 1088#if NPCI > 0 1089 case 0x00041103: /* HighPoint HPT366 */ 1090 if (!((dmastat = ata_dmastatus(scp)) & ATA_BMSTAT_INTERRUPT)) 1091 return; 1092 outb(scp->bmaddr + ATA_BMSTAT_PORT, dmastat | ATA_BMSTAT_INTERRUPT); 1093 break; 1094 1095 case 0x4d33105a: /* Promise 33's */ 1096 case 0x4d38105a: /* Promise 66's */ 1097 { 1098 struct ata_pci_softc *sc=device_get_softc(device_get_parent(scp->dev)); 1099 1100 if (!(inl(rman_get_start(sc->bmio) + 0x1c) & 1101 ((scp->unit) ? 0x00004000 : 0x00000400))) 1102 return; 1103 } 1104 /* FALLTHROUGH */ 1105#endif 1106 default: 1107 if (scp->flags & ATA_DMA_ACTIVE) {
|
1109 return; 1110 else 1111 outb(scp->bmaddr+ATA_BMSTAT_PORT, dmastat|ATA_BMSTAT_INTERRUPT); 1112 } 1113 } 1114 DELAY(1); 1115 1116 /* get status, if drive is busy it didn't interrupt so return */ 1117 if ((scp->status = inb(scp->ioaddr + ATA_STATUS)) & ATA_S_BUSY) 1118 return; 1119 1120 /* find & call the responsible driver to process this interrupt */ 1121 switch (scp->active) { 1122#if NATADISK > 0 1123 case ATA_ACTIVE_ATA: 1124 if (!scp->running) 1125 return; 1126 if (ad_interrupt(scp->running) == ATA_OP_CONTINUES) 1127 return; 1128 break; 1129#endif 1130#if NATAPICD > 0 || NATAPIFD > 0 || NATAPIST > 0 1131 case ATA_ACTIVE_ATAPI: 1132 if (!scp->running) 1133 return; 1134 if (atapi_interrupt(scp->running) == ATA_OP_CONTINUES) 1135 return; 1136 break; 1137#endif 1138 case ATA_WAIT_INTR: 1139 wakeup((caddr_t)scp); 1140 break; 1141 1142 case ATA_WAIT_READY: 1143 break; 1144 1145 case ATA_REINITING: 1146 return; 1147 1148 default: 1149 case ATA_IDLE: 1150#ifdef ATA_DEBUG 1151 { 1152 static int32_t intr_count = 0; 1153 if (intr_count++ < 10) 1154 ata_printf(scp, -1, "unwanted interrupt %d status = %02x\n", 1155 intr_count, scp->status); 1156 } 1157#endif 1158 } 1159 scp->active = ATA_IDLE; 1160 scp->running = NULL; 1161 ata_start(scp); 1162} 1163 1164void 1165ata_start(struct ata_softc *scp) 1166{ 1167#if NATADISK > 0 1168 struct ad_request *ad_request; 1169#endif 1170#if NATAPICD > 0 || NATAPIFD > 0 || NATAPIST > 0 1171 struct atapi_request *atapi_request; 1172#endif 1173 1174 if (scp->active != ATA_IDLE) 1175 return; 1176 scp->active = ATA_ACTIVE; 1177 1178#if NATADISK > 0 1179 /* find & call the responsible driver if anything on the ATA queue */ 1180 if (TAILQ_EMPTY(&scp->ata_queue)) { 1181 if (scp->devices & (ATA_ATA_MASTER) && scp->dev_softc[0]) 1182 ad_start((struct ad_softc *)scp->dev_softc[0]); 1183 if (scp->devices & (ATA_ATA_SLAVE) && scp->dev_softc[1]) 1184 ad_start((struct ad_softc *)scp->dev_softc[1]); 1185 } 1186 if ((ad_request = TAILQ_FIRST(&scp->ata_queue))) { 1187 TAILQ_REMOVE(&scp->ata_queue, ad_request, chain); 1188 scp->active = ATA_ACTIVE_ATA; 1189 scp->running = ad_request; 1190 ad_transfer(ad_request); 1191 return; 1192 } 1193#endif 1194#if NATAPICD > 0 || NATAPIFD > 0 || NATAPIST > 0 1195 /* find & call the responsible driver if anything on the ATAPI queue */ 1196 if (TAILQ_EMPTY(&scp->atapi_queue)) { 1197 if (scp->devices & (ATA_ATAPI_MASTER) && scp->dev_softc[0]) 1198 atapi_start((struct atapi_softc *)scp->dev_softc[0]); 1199 if (scp->devices & (ATA_ATAPI_SLAVE) && scp->dev_softc[1]) 1200 atapi_start((struct atapi_softc *)scp->dev_softc[1]); 1201 } 1202 if ((atapi_request = TAILQ_FIRST(&scp->atapi_queue))) { 1203 TAILQ_REMOVE(&scp->atapi_queue, atapi_request, chain); 1204 scp->active = ATA_ACTIVE_ATAPI; 1205 scp->running = atapi_request; 1206 atapi_transfer(atapi_request); 1207 return; 1208 } 1209#endif 1210 scp->active = ATA_IDLE; 1211} 1212 1213void 1214ata_reset(struct ata_softc *scp, int32_t *mask) 1215{ 1216 int32_t timeout; 1217 u_int8_t status0 = 0, status1 = 0; 1218 1219 /* reset channel */ 1220 outb(scp->ioaddr + ATA_DRIVE, ATA_D_IBM | ATA_MASTER); 1221 DELAY(1); 1222 inb(scp->ioaddr + ATA_STATUS); 1223 outb(scp->altioaddr, ATA_A_IDS | ATA_A_RESET); 1224 DELAY(10000); 1225 outb(scp->altioaddr, ATA_A_IDS); 1226 DELAY(10000); 1227 inb(scp->ioaddr + ATA_ERROR); 1228 DELAY(3000); 1229 1230 /* wait for BUSY to go inactive */ 1231 for (timeout = 0; timeout < 310000; timeout++) { 1232 outb(scp->ioaddr + ATA_DRIVE, ATA_D_IBM | ATA_MASTER); 1233 DELAY(1); 1234 status0 = inb(scp->ioaddr + ATA_STATUS); 1235 outb(scp->ioaddr + ATA_DRIVE, ATA_D_IBM | ATA_SLAVE); 1236 DELAY(1); 1237 status1 = inb(scp->ioaddr + ATA_STATUS); 1238 if (*mask == 0x01) /* wait for master only */ 1239 if (!(status0 & ATA_S_BUSY)) 1240 break; 1241 if (*mask == 0x02) /* wait for slave only */ 1242 if (!(status1 & ATA_S_BUSY)) 1243 break; 1244 if (*mask == 0x03) /* wait for both master & slave */ 1245 if (!(status0 & ATA_S_BUSY) && !(status1 & ATA_S_BUSY)) 1246 break; 1247 DELAY(100); 1248 } 1249 DELAY(1); 1250 outb(scp->altioaddr, ATA_A_4BIT); 1251 if (status0 & ATA_S_BUSY) 1252 *mask &= ~0x01; 1253 if (status1 & ATA_S_BUSY) 1254 *mask &= ~0x02; 1255 if (bootverbose) 1256 ata_printf(scp, -1, "mask=%02x status0=%02x status1=%02x\n", 1257 *mask, status0, status1); 1258} 1259 1260int32_t 1261ata_reinit(struct ata_softc *scp) 1262{ 1263 int32_t mask = 0, omask; 1264 1265 scp->active = ATA_REINITING; 1266 scp->running = NULL; 1267 if (scp->devices & (ATA_ATA_MASTER | ATA_ATAPI_MASTER)) 1268 mask |= 0x01; 1269 if (scp->devices & (ATA_ATA_SLAVE | ATA_ATAPI_SLAVE)) 1270 mask |= 0x02; 1271 if (mask) { 1272 omask = mask; 1273 ata_printf(scp, -1, "resetting devices .. "); 1274 ata_reset(scp, &mask); 1275 if (omask != mask) 1276 printf(" device dissapeared! %d ", omask & ~mask); 1277 1278#if NATADISK > 0 1279 if (scp->devices & (ATA_ATA_MASTER) && scp->dev_softc[0]) 1280 ad_reinit((struct ad_softc *)scp->dev_softc[0]); 1281 if (scp->devices & (ATA_ATA_SLAVE) && scp->dev_softc[1]) 1282 ad_reinit((struct ad_softc *)scp->dev_softc[1]); 1283#endif 1284#if NATAPICD > 0 || NATAPIFD > 0 || NATAPIST > 0 1285 if (scp->devices & (ATA_ATAPI_MASTER) && scp->dev_softc[0]) 1286 atapi_reinit((struct atapi_softc *)scp->dev_softc[0]); 1287 if (scp->devices & (ATA_ATAPI_SLAVE) && scp->dev_softc[1]) 1288 atapi_reinit((struct atapi_softc *)scp->dev_softc[1]); 1289#endif 1290 printf("done\n"); 1291 } 1292 scp->active = ATA_IDLE; 1293 ata_start(scp); 1294 return 0; 1295} 1296 1297int32_t 1298ata_wait(struct ata_softc *scp, int32_t device, u_int8_t mask) 1299{ 1300 u_int32_t timeout = 0; 1301 1302 DELAY(1); 1303 while (timeout < 5000000) { /* timeout 5 secs */ 1304 scp->status = inb(scp->ioaddr + ATA_STATUS); 1305 1306 /* if drive fails status, reselect the drive just to be sure */ 1307 if (scp->status == 0xff) { 1308 ata_printf(scp, device, "no status, reselecting device\n"); 1309 outb(scp->ioaddr + ATA_DRIVE, ATA_D_IBM | device); 1310 DELAY(1); 1311 scp->status = inb(scp->ioaddr + ATA_STATUS); 1312 } 1313 1314 /* are we done ? */ 1315 if (!(scp->status & ATA_S_BUSY)) 1316 break; 1317 1318 if (timeout > 1000) { 1319 timeout += 1000; 1320 DELAY(1000); 1321 } 1322 else { 1323 timeout += 10; 1324 DELAY(10); 1325 } 1326 } 1327 if (scp->status & ATA_S_ERROR) 1328 scp->error = inb(scp->ioaddr + ATA_ERROR); 1329 if (timeout >= 5000000) 1330 return -1; 1331 if (!mask) 1332 return (scp->status & ATA_S_ERROR); 1333 1334 /* Wait 50 msec for bits wanted. */ 1335 timeout = 5000; 1336 while (timeout--) { 1337 scp->status = inb(scp->ioaddr + ATA_STATUS); 1338 if ((scp->status & mask) == mask) { 1339 if (scp->status & ATA_S_ERROR) 1340 scp->error = inb(scp->ioaddr + ATA_ERROR); 1341 return (scp->status & ATA_S_ERROR); 1342 } 1343 DELAY (10); 1344 } 1345 return -1; 1346} 1347 1348int32_t 1349ata_command(struct ata_softc *scp, int32_t device, u_int32_t command, 1350 u_int32_t cylinder, u_int32_t head, u_int32_t sector, 1351 u_int32_t count, u_int32_t feature, int32_t flags) 1352{ 1353#ifdef ATA_DEBUG 1354 ata_printf(scp, device, "ata_command: addr=%04x, cmd=%02x, " 1355 "c=%d, h=%d, s=%d, count=%d, flags=%02x\n", 1356 scp->ioaddr, command, cylinder, head, sector, count, flags); 1357#endif 1358 1359 /* ready to issue command ? */ 1360 if (ata_wait(scp, device, 0) < 0) { 1361 ata_printf(scp, device, 1362 "timeout waiting to give command=%02x s=%02x e=%02x\n", 1363 command, scp->status, scp->error); 1364 return -1; 1365 } 1366 outb(scp->ioaddr + ATA_FEATURE, feature); 1367 outb(scp->ioaddr + ATA_CYL_LSB, cylinder); 1368 outb(scp->ioaddr + ATA_CYL_MSB, cylinder >> 8); 1369 outb(scp->ioaddr + ATA_DRIVE, ATA_D_IBM | device | head); 1370 outb(scp->ioaddr + ATA_SECTOR, sector); 1371 outb(scp->ioaddr + ATA_COUNT, count); 1372 1373 switch (flags) { 1374 case ATA_WAIT_INTR: 1375 if (scp->active != ATA_IDLE) 1376 ata_printf(scp, device, "WARNING: WAIT_INTR active=%s\n", 1377 active2str(scp->active)); 1378 scp->active = ATA_WAIT_INTR; 1379 asleep((caddr_t)scp, PRIBIO, "atacmd", 10 * hz); 1380 outb(scp->ioaddr + ATA_CMD, command); 1381 if (await(PRIBIO, 10 * hz)) { 1382 ata_printf(scp, device, "ata_command: timeout waiting for intr\n"); 1383 scp->active = ATA_IDLE; 1384 return -1; 1385 } 1386 break; 1387 1388 case ATA_WAIT_READY: 1389 if (scp->active != ATA_IDLE && scp->active != ATA_REINITING) 1390 ata_printf(scp, device, "WARNING: WAIT_READY active=%s\n", 1391 active2str(scp->active)); 1392 if (scp->active != ATA_REINITING) 1393 scp->active = ATA_WAIT_READY; 1394 outb(scp->ioaddr + ATA_CMD, command); 1395 if (ata_wait(scp, device, ATA_S_READY) < 0) { 1396 ata_printf(scp, device, 1397 "timeout waiting for command=%02x s=%02x e=%02x\n", 1398 command, scp->status, scp->error); 1399 if (scp->active != ATA_REINITING) 1400 scp->active = ATA_IDLE; 1401 return -1; 1402 } 1403 if (scp->active != ATA_REINITING) 1404 scp->active = ATA_IDLE; 1405 break; 1406 1407 case ATA_IMMEDIATE: 1408 outb(scp->ioaddr + ATA_CMD, command); 1409 break; 1410 1411 default: 1412 ata_printf(scp, device, "DANGER: illegal interrupt flag=%s\n", 1413 active2str(flags)); 1414 } 1415 return 0; 1416} 1417 1418int 1419ata_printf(struct ata_softc *scp, int32_t device, const char * fmt, ...) 1420{ 1421 va_list ap; 1422 int ret; 1423 1424 if (device == -1) 1425 ret = printf("ata%d: ", device_get_unit(scp->dev)); 1426 else 1427 ret = printf("ata%d-%s: ", device_get_unit(scp->dev), 1428 (device == ATA_MASTER) ? "master" : "slave"); 1429 va_start(ap, fmt); 1430 ret += vprintf(fmt, ap); 1431 va_end(ap); 1432 return ret; 1433} 1434 1435int 1436ata_get_lun(u_int32_t *map) 1437{ 1438 int lun = ffs(~*map) - 1; 1439 1440 *map |= (1 << lun); 1441 return lun; 1442} 1443 1444void 1445ata_free_lun(u_int32_t *map, int lun) 1446{ 1447 *map &= ~(1 << lun); 1448} 1449 1450int8_t * 1451ata_mode2str(int32_t mode) 1452{ 1453 switch (mode) { 1454 case ATA_PIO: return "BIOSPIO"; 1455 case ATA_PIO0: return "PIO0"; 1456 case ATA_PIO1: return "PIO1"; 1457 case ATA_PIO2: return "PIO2"; 1458 case ATA_PIO3: return "PIO3"; 1459 case ATA_PIO4: return "PIO4"; 1460 case ATA_WDMA2: return "WDMA2"; 1461 case ATA_UDMA2: return "UDMA33"; 1462 case ATA_UDMA4: return "UDMA66"; 1463 case ATA_DMA: return "BIOSDMA"; 1464 default: return "???"; 1465 } 1466} 1467 1468int8_t 1469ata_pio2mode(int32_t pio) 1470{ 1471 switch (pio) { 1472 default: 1473 case 0: return ATA_PIO0; 1474 case 1: return ATA_PIO1; 1475 case 2: return ATA_PIO2; 1476 case 3: return ATA_PIO3; 1477 case 4: return ATA_PIO4; 1478 } 1479} 1480 1481int 1482ata_pmode(struct ata_params *ap) 1483{ 1484 if (ap->atavalid & ATA_FLAG_64_70) { 1485 if (ap->apiomodes & 2) 1486 return 4; 1487 if (ap->apiomodes & 1) 1488 return 3; 1489 } 1490 if (ap->opiomode == 2) 1491 return 2; 1492 if (ap->opiomode == 1) 1493 return 1; 1494 if (ap->opiomode == 0) 1495 return 0; 1496 return -1; 1497} 1498 1499int 1500ata_wmode(struct ata_params *ap) 1501{ 1502 if (ap->wdmamodes & 4) 1503 return 2; 1504 if (ap->wdmamodes & 2) 1505 return 1; 1506 if (ap->wdmamodes & 1) 1507 return 0; 1508 return -1; 1509} 1510 1511int 1512ata_umode(struct ata_params *ap) 1513{ 1514 if (ap->atavalid & ATA_FLAG_88) { 1515 if (ap->udmamodes & 0x10)
|