1/*
2 * Device probe and attach routines for the following
3 * Advanced Systems Inc. SCSI controllers:
4 *
5 * ABP940UW - Bus-Master PCI Ultra-Wide (240 CDB)
6 *
7 * Copyright (c) 1998 Justin Gibbs.
8 * All rights reserved.
9 *
10 * Redistribution and use in source and binary forms, with or without
11 * modification, are permitted provided that the following conditions
12 * are met:
13 * 1. Redistributions of source code must retain the above copyright
14 * notice, this list of conditions, and the following disclaimer,
15 * without modification, immediately at the beginning of the file.
16 * 2. The name of the author may not be used to endorse or promote products
17 * derived from this software without specific prior written permission.
18 *
19 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
20 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
21 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
22 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
23 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
24 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
25 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
26 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
27 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
28 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
29 * SUCH DAMAGE.
30 *
31 * $Id: adw_pci.c,v 1.5 1999/05/09 17:06:36 peter Exp $
32 */
33
34#include <sys/param.h>
35#include <sys/systm.h>
36#include <sys/kernel.h>
37
38#include <machine/bus_pio.h>
39#include <machine/bus.h>
40
41#include <pci/pcireg.h>
42#include <pci/pcivar.h>
43
44#include <cam/cam.h>
45#include <cam/scsi/scsi_all.h>
46
47#include <dev/advansys/adwvar.h>
48#include <dev/advansys/adwlib.h>
49#include <dev/advansys/adwmcode.h>
50
51#define PCI_BASEADR0 PCI_MAP_REG_START /* I/O Address */
52#define PCI_BASEADR1 PCI_MAP_REG_START + 4 /* Mem I/O Address */
53
54#define PCI_DEVICE_ID_ADVANSYS_3550 0x230010CD
55
56#define ADW_PCI_MAX_DMA_ADDR (0xFFFFFFFFUL)
57#define ADW_PCI_MAX_DMA_COUNT (0xFFFFFFFFUL)
58
59static const char* adwpciprobe(pcici_t tag, pcidi_t type);
60static void adwpciattach(pcici_t config_id, int unit);
61
62static struct pci_device adw_pci_driver = {
63 "adw",
64 adwpciprobe,
65 adwpciattach,
66 &adw_unit,
67 NULL
68};
69
70COMPAT_PCI_DRIVER (adw_pci, adw_pci_driver);
71
72static const char*
73adwpciprobe(pcici_t tag, pcidi_t type)
74{
75 switch (type) {
76 case PCI_DEVICE_ID_ADVANSYS_3550:
77 return ("AdvanSys ASC3550 SCSI controller");
78 default:
79 break;
80 }
81 return (NULL);
82}
83
84static void
85adwpciattach(pcici_t config_id, int unit)
86{
87 u_int32_t id;
88 u_int32_t command;
89 vm_offset_t vaddr;
90#ifdef ADW_ALLOW_MEMIO
91 vm_offset_t paddr;
92#endif
93 u_int16_t io_port;
94 bus_space_tag_t tag;
95 bus_space_handle_t bsh;
96 struct adw_softc *adw;
97 int error;
98
99 /*
100 * Determine the chip version.
101 */
102 id = pci_cfgread(config_id, PCI_ID_REG, /*bytes*/4);
103 command = pci_cfgread(config_id, PCIR_COMMAND, /*bytes*/1);
104
105 /*
106 * These cards do not allow memory mapped accesses, so we must
107 * ensure that I/O accesses are available or we won't be able
108 * to talk to them.
109 */
110 vaddr = 0;
111#ifdef ADW_ALLOW_MEMIO
112 if ((command & PCI_COMMAND_MEM_ENABLE) == 0
113 || (pci_map_mem(config_id, PCI_BASEADR1, &vaddr, &paddr)) == 0)
114#endif
115 if ((command & PCI_COMMAND_IO_ENABLE) == 0
116 || (pci_map_port(config_id, PCI_BASEADR0, &io_port)) == 0)
117 return;
118
119 /* XXX Should be passed in by parent bus */
120 /* XXX Why isn't the 0x10 offset incorporated into the reg defs? */
121 if (vaddr != 0) {
122 tag = I386_BUS_SPACE_MEM;
123 bsh = vaddr;
124 } else {
125 tag = I386_BUS_SPACE_IO;
126 bsh = io_port;
127 }
128
129
130 if (adw_find_signature(tag, bsh) == 0)
131 return;
132
133 adw = adw_alloc(unit, tag, bsh);
134 if (adw == NULL)
135 return;
136
137 /* Allocate a dmatag for our transfer DMA maps */
138 /* XXX Should be a child of the PCI bus dma tag */
139 error = bus_dma_tag_create(/*parent*/NULL, /*alignment*/0,
140 /*boundary*/0,
141 /*lowaddr*/ADW_PCI_MAX_DMA_ADDR,
142 /*highaddr*/BUS_SPACE_MAXADDR,
143 /*filter*/NULL, /*filterarg*/NULL,
144 /*maxsize*/BUS_SPACE_MAXSIZE_32BIT,
145 /*nsegments*/BUS_SPACE_UNRESTRICTED,
146 /*maxsegsz*/ADW_PCI_MAX_DMA_COUNT,
147 /*flags*/0,
148 &adw->parent_dmat);
149
150 adw->init_level++;
151
152 if (error != 0) {
153 printf("%s: Could not allocate DMA tag - error %d\n",
154 adw_name(adw), error);
155 adw_free(adw);
156 return;
157 }
158
159 adw->init_level++;
160
161 if (adw_init(adw) != 0) {
162 adw_free(adw);
163 return;
164 }
165
166 /*
167 * If the PCI Configuration Command Register "Parity Error Response
168 * Control" Bit was clear (0), then set the microcode variable
169 * 'control_flag' CONTROL_FLAG_IGNORE_PERR flag to tell the microcode
170 * to ignore DMA parity errors.
171 */
172 if ((command & PCIM_CMD_PERRESPEN) == 0)
173 adw_lram_write_16(adw, ADW_MC_CONTROL_FLAG,
174 adw_lram_read_16(adw, ADW_MC_CONTROL_FLAG)
175 | ADW_MC_CONTROL_IGN_PERR);
176
177 if ((pci_map_int(config_id, adw_intr, (void *)adw, &cam_imask)) == 0) {
178 adw_free(adw);
179 return;
180 }
181
182 adw_attach(adw);
183}
2 * Device probe and attach routines for the following
3 * Advanced Systems Inc. SCSI controllers:
4 *
5 * ABP940UW - Bus-Master PCI Ultra-Wide (240 CDB)
6 *
7 * Copyright (c) 1998 Justin Gibbs.
8 * All rights reserved.
9 *
10 * Redistribution and use in source and binary forms, with or without
11 * modification, are permitted provided that the following conditions
12 * are met:
13 * 1. Redistributions of source code must retain the above copyright
14 * notice, this list of conditions, and the following disclaimer,
15 * without modification, immediately at the beginning of the file.
16 * 2. The name of the author may not be used to endorse or promote products
17 * derived from this software without specific prior written permission.
18 *
19 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
20 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
21 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
22 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
23 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
24 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
25 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
26 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
27 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
28 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
29 * SUCH DAMAGE.
30 *
31 * $Id: adw_pci.c,v 1.5 1999/05/09 17:06:36 peter Exp $
32 */
33
34#include <sys/param.h>
35#include <sys/systm.h>
36#include <sys/kernel.h>
37
38#include <machine/bus_pio.h>
39#include <machine/bus.h>
40
41#include <pci/pcireg.h>
42#include <pci/pcivar.h>
43
44#include <cam/cam.h>
45#include <cam/scsi/scsi_all.h>
46
47#include <dev/advansys/adwvar.h>
48#include <dev/advansys/adwlib.h>
49#include <dev/advansys/adwmcode.h>
50
51#define PCI_BASEADR0 PCI_MAP_REG_START /* I/O Address */
52#define PCI_BASEADR1 PCI_MAP_REG_START + 4 /* Mem I/O Address */
53
54#define PCI_DEVICE_ID_ADVANSYS_3550 0x230010CD
55
56#define ADW_PCI_MAX_DMA_ADDR (0xFFFFFFFFUL)
57#define ADW_PCI_MAX_DMA_COUNT (0xFFFFFFFFUL)
58
59static const char* adwpciprobe(pcici_t tag, pcidi_t type);
60static void adwpciattach(pcici_t config_id, int unit);
61
62static struct pci_device adw_pci_driver = {
63 "adw",
64 adwpciprobe,
65 adwpciattach,
66 &adw_unit,
67 NULL
68};
69
70COMPAT_PCI_DRIVER (adw_pci, adw_pci_driver);
71
72static const char*
73adwpciprobe(pcici_t tag, pcidi_t type)
74{
75 switch (type) {
76 case PCI_DEVICE_ID_ADVANSYS_3550:
77 return ("AdvanSys ASC3550 SCSI controller");
78 default:
79 break;
80 }
81 return (NULL);
82}
83
84static void
85adwpciattach(pcici_t config_id, int unit)
86{
87 u_int32_t id;
88 u_int32_t command;
89 vm_offset_t vaddr;
90#ifdef ADW_ALLOW_MEMIO
91 vm_offset_t paddr;
92#endif
93 u_int16_t io_port;
94 bus_space_tag_t tag;
95 bus_space_handle_t bsh;
96 struct adw_softc *adw;
97 int error;
98
99 /*
100 * Determine the chip version.
101 */
102 id = pci_cfgread(config_id, PCI_ID_REG, /*bytes*/4);
103 command = pci_cfgread(config_id, PCIR_COMMAND, /*bytes*/1);
104
105 /*
106 * These cards do not allow memory mapped accesses, so we must
107 * ensure that I/O accesses are available or we won't be able
108 * to talk to them.
109 */
110 vaddr = 0;
111#ifdef ADW_ALLOW_MEMIO
112 if ((command & PCI_COMMAND_MEM_ENABLE) == 0
113 || (pci_map_mem(config_id, PCI_BASEADR1, &vaddr, &paddr)) == 0)
114#endif
115 if ((command & PCI_COMMAND_IO_ENABLE) == 0
116 || (pci_map_port(config_id, PCI_BASEADR0, &io_port)) == 0)
117 return;
118
119 /* XXX Should be passed in by parent bus */
120 /* XXX Why isn't the 0x10 offset incorporated into the reg defs? */
121 if (vaddr != 0) {
122 tag = I386_BUS_SPACE_MEM;
123 bsh = vaddr;
124 } else {
125 tag = I386_BUS_SPACE_IO;
126 bsh = io_port;
127 }
128
129
130 if (adw_find_signature(tag, bsh) == 0)
131 return;
132
133 adw = adw_alloc(unit, tag, bsh);
134 if (adw == NULL)
135 return;
136
137 /* Allocate a dmatag for our transfer DMA maps */
138 /* XXX Should be a child of the PCI bus dma tag */
139 error = bus_dma_tag_create(/*parent*/NULL, /*alignment*/0,
140 /*boundary*/0,
141 /*lowaddr*/ADW_PCI_MAX_DMA_ADDR,
142 /*highaddr*/BUS_SPACE_MAXADDR,
143 /*filter*/NULL, /*filterarg*/NULL,
144 /*maxsize*/BUS_SPACE_MAXSIZE_32BIT,
145 /*nsegments*/BUS_SPACE_UNRESTRICTED,
146 /*maxsegsz*/ADW_PCI_MAX_DMA_COUNT,
147 /*flags*/0,
148 &adw->parent_dmat);
149
150 adw->init_level++;
151
152 if (error != 0) {
153 printf("%s: Could not allocate DMA tag - error %d\n",
154 adw_name(adw), error);
155 adw_free(adw);
156 return;
157 }
158
159 adw->init_level++;
160
161 if (adw_init(adw) != 0) {
162 adw_free(adw);
163 return;
164 }
165
166 /*
167 * If the PCI Configuration Command Register "Parity Error Response
168 * Control" Bit was clear (0), then set the microcode variable
169 * 'control_flag' CONTROL_FLAG_IGNORE_PERR flag to tell the microcode
170 * to ignore DMA parity errors.
171 */
172 if ((command & PCIM_CMD_PERRESPEN) == 0)
173 adw_lram_write_16(adw, ADW_MC_CONTROL_FLAG,
174 adw_lram_read_16(adw, ADW_MC_CONTROL_FLAG)
175 | ADW_MC_CONTROL_IGN_PERR);
176
177 if ((pci_map_int(config_id, adw_intr, (void *)adw, &cam_imask)) == 0) {
178 adw_free(adw);
179 return;
180 }
181
182 adw_attach(adw);
183}