1/****************************************************************************** 2 * 3 * Name: acmacros.h - C macros for the entire subsystem. 4 * 5 *****************************************************************************/ 6 7/* 8 * Copyright (C) 2000 - 2012, Intel Corp. 9 * All rights reserved. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions, and the following disclaimer, 16 * without modification. 17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 18 * substantially similar to the "NO WARRANTY" disclaimer below 19 * ("Disclaimer") and any redistribution must be conditioned upon 20 * including a substantially similar Disclaimer requirement for further 21 * binary redistribution. 22 * 3. Neither the names of the above-listed copyright holders nor the names 23 * of any contributors may be used to endorse or promote products derived 24 * from this software without specific prior written permission. 25 * 26 * Alternatively, this software may be distributed under the terms of the 27 * GNU General Public License ("GPL") version 2 as published by the Free 28 * Software Foundation. 29 * 30 * NO WARRANTY 31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 41 * POSSIBILITY OF SUCH DAMAGES. 42 */ 43 44#ifndef __ACMACROS_H__ 45#define __ACMACROS_H__ 46 47 48/* 49 * Extract data using a pointer. Any more than a byte and we 50 * get into potential aligment issues -- see the STORE macros below. 51 * Use with care. 52 */ 53#define ACPI_GET8(ptr) *ACPI_CAST_PTR (UINT8, ptr) 54#define ACPI_GET16(ptr) *ACPI_CAST_PTR (UINT16, ptr) 55#define ACPI_GET32(ptr) *ACPI_CAST_PTR (UINT32, ptr) 56#define ACPI_GET64(ptr) *ACPI_CAST_PTR (UINT64, ptr) 57#define ACPI_SET8(ptr) *ACPI_CAST_PTR (UINT8, ptr) 58#define ACPI_SET16(ptr) *ACPI_CAST_PTR (UINT16, ptr) 59#define ACPI_SET32(ptr) *ACPI_CAST_PTR (UINT32, ptr) 60#define ACPI_SET64(ptr) *ACPI_CAST_PTR (UINT64, ptr) 61 62/* 63 * printf() format helpers 64 */ 65 66/* Split 64-bit integer into two 32-bit values. Use with %8.8X%8.8X */ 67 68#define ACPI_FORMAT_UINT64(i) ACPI_HIDWORD(i), ACPI_LODWORD(i) 69 70#if ACPI_MACHINE_WIDTH == 64 71#define ACPI_FORMAT_NATIVE_UINT(i) ACPI_FORMAT_UINT64(i) 72#else 73#define ACPI_FORMAT_NATIVE_UINT(i) 0, (i) 74#endif 75 76 77/* 78 * Macros for moving data around to/from buffers that are possibly unaligned. 79 * If the hardware supports the transfer of unaligned data, just do the store. 80 * Otherwise, we have to move one byte at a time. 81 */ 82#ifdef ACPI_BIG_ENDIAN 83/* 84 * Macros for big-endian machines 85 */ 86 87/* These macros reverse the bytes during the move, converting little-endian to big endian */ 88 89 /* Big Endian <== Little Endian */ 90 /* Hi...Lo Lo...Hi */ 91/* 16-bit source, 16/32/64 destination */ 92 93#define ACPI_MOVE_16_TO_16(d, s) {(( UINT8 *)(void *)(d))[0] = ((UINT8 *)(void *)(s))[1];\ 94 (( UINT8 *)(void *)(d))[1] = ((UINT8 *)(void *)(s))[0];} 95 96#define ACPI_MOVE_16_TO_32(d, s) {(*(UINT32 *)(void *)(d))=0;\ 97 ((UINT8 *)(void *)(d))[2] = ((UINT8 *)(void *)(s))[1];\ 98 ((UINT8 *)(void *)(d))[3] = ((UINT8 *)(void *)(s))[0];} 99 100#define ACPI_MOVE_16_TO_64(d, s) {(*(UINT64 *)(void *)(d))=0;\ 101 ((UINT8 *)(void *)(d))[6] = ((UINT8 *)(void *)(s))[1];\ 102 ((UINT8 *)(void *)(d))[7] = ((UINT8 *)(void *)(s))[0];} 103 104/* 32-bit source, 16/32/64 destination */ 105 106#define ACPI_MOVE_32_TO_16(d, s) ACPI_MOVE_16_TO_16(d, s) /* Truncate to 16 */ 107 108#define ACPI_MOVE_32_TO_32(d, s) {(( UINT8 *)(void *)(d))[0] = ((UINT8 *)(void *)(s))[3];\ 109 (( UINT8 *)(void *)(d))[1] = ((UINT8 *)(void *)(s))[2];\ 110 (( UINT8 *)(void *)(d))[2] = ((UINT8 *)(void *)(s))[1];\ 111 (( UINT8 *)(void *)(d))[3] = ((UINT8 *)(void *)(s))[0];} 112 113#define ACPI_MOVE_32_TO_64(d, s) {(*(UINT64 *)(void *)(d))=0;\ 114 ((UINT8 *)(void *)(d))[4] = ((UINT8 *)(void *)(s))[3];\ 115 ((UINT8 *)(void *)(d))[5] = ((UINT8 *)(void *)(s))[2];\ 116 ((UINT8 *)(void *)(d))[6] = ((UINT8 *)(void *)(s))[1];\ 117 ((UINT8 *)(void *)(d))[7] = ((UINT8 *)(void *)(s))[0];} 118 119/* 64-bit source, 16/32/64 destination */ 120 121#define ACPI_MOVE_64_TO_16(d, s) ACPI_MOVE_16_TO_16(d, s) /* Truncate to 16 */ 122 123#define ACPI_MOVE_64_TO_32(d, s) ACPI_MOVE_32_TO_32(d, s) /* Truncate to 32 */ 124 125#define ACPI_MOVE_64_TO_64(d, s) {(( UINT8 *)(void *)(d))[0] = ((UINT8 *)(void *)(s))[7];\ 126 (( UINT8 *)(void *)(d))[1] = ((UINT8 *)(void *)(s))[6];\ 127 (( UINT8 *)(void *)(d))[2] = ((UINT8 *)(void *)(s))[5];\ 128 (( UINT8 *)(void *)(d))[3] = ((UINT8 *)(void *)(s))[4];\ 129 (( UINT8 *)(void *)(d))[4] = ((UINT8 *)(void *)(s))[3];\ 130 (( UINT8 *)(void *)(d))[5] = ((UINT8 *)(void *)(s))[2];\ 131 (( UINT8 *)(void *)(d))[6] = ((UINT8 *)(void *)(s))[1];\ 132 (( UINT8 *)(void *)(d))[7] = ((UINT8 *)(void *)(s))[0];} 133#else 134/* 135 * Macros for little-endian machines 136 */ 137 138#ifndef ACPI_MISALIGNMENT_NOT_SUPPORTED 139 140/* The hardware supports unaligned transfers, just do the little-endian move */ 141 142/* 16-bit source, 16/32/64 destination */ 143 144#define ACPI_MOVE_16_TO_16(d, s) *(UINT16 *)(void *)(d) = *(UINT16 *)(void *)(s) 145#define ACPI_MOVE_16_TO_32(d, s) *(UINT32 *)(void *)(d) = *(UINT16 *)(void *)(s) 146#define ACPI_MOVE_16_TO_64(d, s) *(UINT64 *)(void *)(d) = *(UINT16 *)(void *)(s) 147 148/* 32-bit source, 16/32/64 destination */ 149 150#define ACPI_MOVE_32_TO_16(d, s) ACPI_MOVE_16_TO_16(d, s) /* Truncate to 16 */ 151#define ACPI_MOVE_32_TO_32(d, s) *(UINT32 *)(void *)(d) = *(UINT32 *)(void *)(s) 152#define ACPI_MOVE_32_TO_64(d, s) *(UINT64 *)(void *)(d) = *(UINT32 *)(void *)(s) 153 154/* 64-bit source, 16/32/64 destination */ 155 156#define ACPI_MOVE_64_TO_16(d, s) ACPI_MOVE_16_TO_16(d, s) /* Truncate to 16 */ 157#define ACPI_MOVE_64_TO_32(d, s) ACPI_MOVE_32_TO_32(d, s) /* Truncate to 32 */ 158#define ACPI_MOVE_64_TO_64(d, s) *(UINT64 *)(void *)(d) = *(UINT64 *)(void *)(s) 159 160#else 161/* 162 * The hardware does not support unaligned transfers. We must move the 163 * data one byte at a time. These macros work whether the source or 164 * the destination (or both) is/are unaligned. (Little-endian move) 165 */ 166 167/* 16-bit source, 16/32/64 destination */ 168 169#define ACPI_MOVE_16_TO_16(d, s) {(( UINT8 *)(void *)(d))[0] = ((UINT8 *)(void *)(s))[0];\ 170 (( UINT8 *)(void *)(d))[1] = ((UINT8 *)(void *)(s))[1];} 171 172#define ACPI_MOVE_16_TO_32(d, s) {(*(UINT32 *)(void *)(d)) = 0; ACPI_MOVE_16_TO_16(d, s);} 173#define ACPI_MOVE_16_TO_64(d, s) {(*(UINT64 *)(void *)(d)) = 0; ACPI_MOVE_16_TO_16(d, s);} 174 175/* 32-bit source, 16/32/64 destination */ 176 177#define ACPI_MOVE_32_TO_16(d, s) ACPI_MOVE_16_TO_16(d, s) /* Truncate to 16 */ 178 179#define ACPI_MOVE_32_TO_32(d, s) {(( UINT8 *)(void *)(d))[0] = ((UINT8 *)(void *)(s))[0];\ 180 (( UINT8 *)(void *)(d))[1] = ((UINT8 *)(void *)(s))[1];\ 181 (( UINT8 *)(void *)(d))[2] = ((UINT8 *)(void *)(s))[2];\ 182 (( UINT8 *)(void *)(d))[3] = ((UINT8 *)(void *)(s))[3];} 183 184#define ACPI_MOVE_32_TO_64(d, s) {(*(UINT64 *)(void *)(d)) = 0; ACPI_MOVE_32_TO_32(d, s);} 185 186/* 64-bit source, 16/32/64 destination */ 187 188#define ACPI_MOVE_64_TO_16(d, s) ACPI_MOVE_16_TO_16(d, s) /* Truncate to 16 */ 189#define ACPI_MOVE_64_TO_32(d, s) ACPI_MOVE_32_TO_32(d, s) /* Truncate to 32 */ 190#define ACPI_MOVE_64_TO_64(d, s) {(( UINT8 *)(void *)(d))[0] = ((UINT8 *)(void *)(s))[0];\ 191 (( UINT8 *)(void *)(d))[1] = ((UINT8 *)(void *)(s))[1];\ 192 (( UINT8 *)(void *)(d))[2] = ((UINT8 *)(void *)(s))[2];\ 193 (( UINT8 *)(void *)(d))[3] = ((UINT8 *)(void *)(s))[3];\ 194 (( UINT8 *)(void *)(d))[4] = ((UINT8 *)(void *)(s))[4];\ 195 (( UINT8 *)(void *)(d))[5] = ((UINT8 *)(void *)(s))[5];\ 196 (( UINT8 *)(void *)(d))[6] = ((UINT8 *)(void *)(s))[6];\ 197 (( UINT8 *)(void *)(d))[7] = ((UINT8 *)(void *)(s))[7];} 198#endif 199#endif 200 201 202/* 203 * Fast power-of-two math macros for non-optimized compilers 204 */ 205#define _ACPI_DIV(value, PowerOf2) ((UINT32) ((value) >> (PowerOf2))) 206#define _ACPI_MUL(value, PowerOf2) ((UINT32) ((value) << (PowerOf2))) 207#define _ACPI_MOD(value, Divisor) ((UINT32) ((value) & ((Divisor) -1))) 208 209#define ACPI_DIV_2(a) _ACPI_DIV(a, 1) 210#define ACPI_MUL_2(a) _ACPI_MUL(a, 1) 211#define ACPI_MOD_2(a) _ACPI_MOD(a, 2) 212 213#define ACPI_DIV_4(a) _ACPI_DIV(a, 2) 214#define ACPI_MUL_4(a) _ACPI_MUL(a, 2) 215#define ACPI_MOD_4(a) _ACPI_MOD(a, 4) 216 217#define ACPI_DIV_8(a) _ACPI_DIV(a, 3) 218#define ACPI_MUL_8(a) _ACPI_MUL(a, 3) 219#define ACPI_MOD_8(a) _ACPI_MOD(a, 8) 220 221#define ACPI_DIV_16(a) _ACPI_DIV(a, 4) 222#define ACPI_MUL_16(a) _ACPI_MUL(a, 4) 223#define ACPI_MOD_16(a) _ACPI_MOD(a, 16) 224 225#define ACPI_DIV_32(a) _ACPI_DIV(a, 5) 226#define ACPI_MUL_32(a) _ACPI_MUL(a, 5) 227#define ACPI_MOD_32(a) _ACPI_MOD(a, 32) 228 229/* 230 * Rounding macros (Power of two boundaries only) 231 */ 232#define ACPI_ROUND_DOWN(value, boundary) (((ACPI_SIZE)(value)) & \ 233 (~(((ACPI_SIZE) boundary)-1))) 234 235#define ACPI_ROUND_UP(value, boundary) ((((ACPI_SIZE)(value)) + \ 236 (((ACPI_SIZE) boundary)-1)) & \ 237 (~(((ACPI_SIZE) boundary)-1))) 238 239/* Note: sizeof(ACPI_SIZE) evaluates to either 4 or 8 (32- vs 64-bit mode) */ 240 241#define ACPI_ROUND_DOWN_TO_32BIT(a) ACPI_ROUND_DOWN(a, 4) 242#define ACPI_ROUND_DOWN_TO_64BIT(a) ACPI_ROUND_DOWN(a, 8) 243#define ACPI_ROUND_DOWN_TO_NATIVE_WORD(a) ACPI_ROUND_DOWN(a, sizeof(ACPI_SIZE)) 244 245#define ACPI_ROUND_UP_TO_32BIT(a) ACPI_ROUND_UP(a, 4) 246#define ACPI_ROUND_UP_TO_64BIT(a) ACPI_ROUND_UP(a, 8) 247#define ACPI_ROUND_UP_TO_NATIVE_WORD(a) ACPI_ROUND_UP(a, sizeof(ACPI_SIZE)) 248 249#define ACPI_ROUND_BITS_UP_TO_BYTES(a) ACPI_DIV_8((a) + 7) 250#define ACPI_ROUND_BITS_DOWN_TO_BYTES(a) ACPI_DIV_8((a)) 251 252#define ACPI_ROUND_UP_TO_1K(a) (((a) + 1023) >> 10) 253 254/* Generic (non-power-of-two) rounding */ 255 256#define ACPI_ROUND_UP_TO(value, boundary) (((value) + ((boundary)-1)) / (boundary)) 257 258#define ACPI_IS_MISALIGNED(value) (((ACPI_SIZE) value) & (sizeof(ACPI_SIZE)-1)) 259 260/* 261 * Bitmask creation 262 * Bit positions start at zero. 263 * MASK_BITS_ABOVE creates a mask starting AT the position and above 264 * MASK_BITS_BELOW creates a mask starting one bit BELOW the position 265 */ 266#define ACPI_MASK_BITS_ABOVE(position) (~((ACPI_UINT64_MAX) << ((UINT32) (position)))) 267#define ACPI_MASK_BITS_BELOW(position) ((ACPI_UINT64_MAX) << ((UINT32) (position))) 268 269/* Bitfields within ACPI registers */ 270
|
271#define ACPI_REGISTER_PREPARE_BITS(Val, Pos, Mask) ((Val << Pos) & Mask)
272#define ACPI_REGISTER_INSERT_VALUE(Reg, Pos, Mask, Val) Reg = (Reg & (~(Mask))) | ACPI_REGISTER_PREPARE_BITS(Val, Pos, Mask)
|
271#define ACPI_REGISTER_PREPARE_BITS(Val, Pos, Mask) \ 272 ((Val << Pos) & Mask) |
273
|
274#define ACPI_INSERT_BITS(Target, Mask, Source) Target = ((Target & (~(Mask))) | (Source & Mask))
|
274#define ACPI_REGISTER_INSERT_VALUE(Reg, Pos, Mask, Val) \ 275 Reg = (Reg & (~(Mask))) | ACPI_REGISTER_PREPARE_BITS(Val, Pos, Mask) |
276
|
277#define ACPI_INSERT_BITS(Target, Mask, Source) \ 278 Target = ((Target & (~(Mask))) | (Source & Mask)) 279 280/* Generic bitfield macros and masks */ 281 282#define ACPI_GET_BITS(SourcePtr, Position, Mask) \ 283 ((*SourcePtr >> Position) & Mask) 284 285#define ACPI_SET_BITS(TargetPtr, Position, Mask, Value) \ 286 (*TargetPtr |= ((Value & Mask) << Position)) 287 288#define ACPI_1BIT_MASK 0x00000001 289#define ACPI_2BIT_MASK 0x00000003 290#define ACPI_3BIT_MASK 0x00000007 291#define ACPI_4BIT_MASK 0x0000000F 292#define ACPI_5BIT_MASK 0x0000001F 293#define ACPI_6BIT_MASK 0x0000003F 294#define ACPI_7BIT_MASK 0x0000007F 295#define ACPI_8BIT_MASK 0x000000FF 296#define ACPI_16BIT_MASK 0x0000FFFF 297#define ACPI_24BIT_MASK 0x00FFFFFF 298 |
299/* 300 * An object of type ACPI_NAMESPACE_NODE can appear in some contexts 301 * where a pointer to an object of type ACPI_OPERAND_OBJECT can also 302 * appear. This macro is used to distinguish them. 303 * 304 * The "Descriptor" field is the first field in both structures. 305 */ 306#define ACPI_GET_DESCRIPTOR_TYPE(d) (((ACPI_DESCRIPTOR *)(void *)(d))->Common.DescriptorType) 307#define ACPI_SET_DESCRIPTOR_TYPE(d, t) (((ACPI_DESCRIPTOR *)(void *)(d))->Common.DescriptorType = t) 308 309/* 310 * Macros for the master AML opcode table 311 */ 312#if defined (ACPI_DISASSEMBLER) || defined (ACPI_DEBUG_OUTPUT) 313#define ACPI_OP(Name, PArgs, IArgs, ObjType, Class, Type, Flags) \ 314 {Name, (UINT32)(PArgs), (UINT32)(IArgs), (UINT32)(Flags), ObjType, Class, Type} 315#else 316#define ACPI_OP(Name, PArgs, IArgs, ObjType, Class, Type, Flags) \ 317 {(UINT32)(PArgs), (UINT32)(IArgs), (UINT32)(Flags), ObjType, Class, Type} 318#endif 319 320#define ARG_TYPE_WIDTH 5 321#define ARG_1(x) ((UINT32)(x)) 322#define ARG_2(x) ((UINT32)(x) << (1 * ARG_TYPE_WIDTH)) 323#define ARG_3(x) ((UINT32)(x) << (2 * ARG_TYPE_WIDTH)) 324#define ARG_4(x) ((UINT32)(x) << (3 * ARG_TYPE_WIDTH)) 325#define ARG_5(x) ((UINT32)(x) << (4 * ARG_TYPE_WIDTH)) 326#define ARG_6(x) ((UINT32)(x) << (5 * ARG_TYPE_WIDTH)) 327 328#define ARGI_LIST1(a) (ARG_1(a)) 329#define ARGI_LIST2(a, b) (ARG_1(b)|ARG_2(a)) 330#define ARGI_LIST3(a, b, c) (ARG_1(c)|ARG_2(b)|ARG_3(a)) 331#define ARGI_LIST4(a, b, c, d) (ARG_1(d)|ARG_2(c)|ARG_3(b)|ARG_4(a)) 332#define ARGI_LIST5(a, b, c, d, e) (ARG_1(e)|ARG_2(d)|ARG_3(c)|ARG_4(b)|ARG_5(a)) 333#define ARGI_LIST6(a, b, c, d, e, f) (ARG_1(f)|ARG_2(e)|ARG_3(d)|ARG_4(c)|ARG_5(b)|ARG_6(a)) 334 335#define ARGP_LIST1(a) (ARG_1(a)) 336#define ARGP_LIST2(a, b) (ARG_1(a)|ARG_2(b)) 337#define ARGP_LIST3(a, b, c) (ARG_1(a)|ARG_2(b)|ARG_3(c)) 338#define ARGP_LIST4(a, b, c, d) (ARG_1(a)|ARG_2(b)|ARG_3(c)|ARG_4(d)) 339#define ARGP_LIST5(a, b, c, d, e) (ARG_1(a)|ARG_2(b)|ARG_3(c)|ARG_4(d)|ARG_5(e)) 340#define ARGP_LIST6(a, b, c, d, e, f) (ARG_1(a)|ARG_2(b)|ARG_3(c)|ARG_4(d)|ARG_5(e)|ARG_6(f)) 341 342#define GET_CURRENT_ARG_TYPE(List) (List & ((UINT32) 0x1F)) 343#define INCREMENT_ARG_LIST(List) (List >>= ((UINT32) ARG_TYPE_WIDTH)) 344 345/* 346 * Ascii error messages can be configured out 347 */ 348#ifndef ACPI_NO_ERROR_MESSAGES 349/* 350 * Error reporting. Callers module and line number are inserted by AE_INFO, 351 * the plist contains a set of parens to allow variable-length lists. 352 * These macros are used for both the debug and non-debug versions of the code. 353 */ 354#define ACPI_ERROR_NAMESPACE(s, e) AcpiUtNamespaceError (AE_INFO, s, e); 355#define ACPI_ERROR_METHOD(s, n, p, e) AcpiUtMethodError (AE_INFO, s, n, p, e); 356#define ACPI_WARN_PREDEFINED(plist) AcpiUtPredefinedWarning plist 357#define ACPI_INFO_PREDEFINED(plist) AcpiUtPredefinedInfo plist 358 359#else 360 361/* No error messages */ 362 363#define ACPI_ERROR_NAMESPACE(s, e) 364#define ACPI_ERROR_METHOD(s, n, p, e) 365#define ACPI_WARN_PREDEFINED(plist) 366#define ACPI_INFO_PREDEFINED(plist) 367 368#endif /* ACPI_NO_ERROR_MESSAGES */ 369 370/* 371 * Debug macros that are conditionally compiled 372 */ 373#ifdef ACPI_DEBUG_OUTPUT 374/* 375 * Function entry tracing 376 */ 377#define ACPI_FUNCTION_TRACE(a) ACPI_FUNCTION_NAME(a) \ 378 AcpiUtTrace(ACPI_DEBUG_PARAMETERS) 379#define ACPI_FUNCTION_TRACE_PTR(a, b) ACPI_FUNCTION_NAME(a) \ 380 AcpiUtTracePtr(ACPI_DEBUG_PARAMETERS, (void *)b) 381#define ACPI_FUNCTION_TRACE_U32(a, b) ACPI_FUNCTION_NAME(a) \ 382 AcpiUtTraceU32(ACPI_DEBUG_PARAMETERS, (UINT32)b) 383#define ACPI_FUNCTION_TRACE_STR(a, b) ACPI_FUNCTION_NAME(a) \ 384 AcpiUtTraceStr(ACPI_DEBUG_PARAMETERS, (char *)b) 385 386#define ACPI_FUNCTION_ENTRY() AcpiUtTrackStackPtr() 387 388/* 389 * Function exit tracing. 390 * WARNING: These macros include a return statement. This is usually considered 391 * bad form, but having a separate exit macro is very ugly and difficult to maintain. 392 * One of the FUNCTION_TRACE macros above must be used in conjunction with these macros 393 * so that "_AcpiFunctionName" is defined. 394 * 395 * Note: the DO_WHILE0 macro is used to prevent some compilers from complaining 396 * about these constructs. 397 */ 398#ifdef ACPI_USE_DO_WHILE_0 399#define ACPI_DO_WHILE0(a) do a while(0) 400#else 401#define ACPI_DO_WHILE0(a) a 402#endif 403 404#define return_VOID ACPI_DO_WHILE0 ({ \ 405 AcpiUtExit (ACPI_DEBUG_PARAMETERS); \ 406 return;}) 407/* 408 * There are two versions of most of the return macros. The default version is 409 * safer, since it avoids side-effects by guaranteeing that the argument will 410 * not be evaluated twice. 411 * 412 * A less-safe version of the macros is provided for optional use if the 413 * compiler uses excessive CPU stack (for example, this may happen in the 414 * debug case if code optimzation is disabled.) 415 */ 416#ifndef ACPI_SIMPLE_RETURN_MACROS 417 418#define return_ACPI_STATUS(s) ACPI_DO_WHILE0 ({ \ 419 register ACPI_STATUS _s = (s); \ 420 AcpiUtStatusExit (ACPI_DEBUG_PARAMETERS, _s); \ 421 return (_s); }) 422#define return_PTR(s) ACPI_DO_WHILE0 ({ \ 423 register void *_s = (void *) (s); \ 424 AcpiUtPtrExit (ACPI_DEBUG_PARAMETERS, (UINT8 *) _s); \ 425 return (_s); }) 426#define return_VALUE(s) ACPI_DO_WHILE0 ({ \ 427 register UINT64 _s = (s); \ 428 AcpiUtValueExit (ACPI_DEBUG_PARAMETERS, _s); \ 429 return (_s); }) 430#define return_UINT8(s) ACPI_DO_WHILE0 ({ \ 431 register UINT8 _s = (UINT8) (s); \ 432 AcpiUtValueExit (ACPI_DEBUG_PARAMETERS, (UINT64) _s); \ 433 return (_s); }) 434#define return_UINT32(s) ACPI_DO_WHILE0 ({ \ 435 register UINT32 _s = (UINT32) (s); \ 436 AcpiUtValueExit (ACPI_DEBUG_PARAMETERS, (UINT64) _s); \ 437 return (_s); }) 438#else /* Use original less-safe macros */ 439 440#define return_ACPI_STATUS(s) ACPI_DO_WHILE0 ({ \ 441 AcpiUtStatusExit (ACPI_DEBUG_PARAMETERS, (s)); \ 442 return((s)); }) 443#define return_PTR(s) ACPI_DO_WHILE0 ({ \ 444 AcpiUtPtrExit (ACPI_DEBUG_PARAMETERS, (UINT8 *) (s)); \ 445 return((s)); }) 446#define return_VALUE(s) ACPI_DO_WHILE0 ({ \ 447 AcpiUtValueExit (ACPI_DEBUG_PARAMETERS, (UINT64) (s)); \ 448 return((s)); }) 449#define return_UINT8(s) return_VALUE(s) 450#define return_UINT32(s) return_VALUE(s) 451 452#endif /* ACPI_SIMPLE_RETURN_MACROS */ 453 454/* Conditional execution */ 455 456#define ACPI_DEBUG_EXEC(a) a 457#define ACPI_DEBUG_ONLY_MEMBERS(a) a; 458#define _VERBOSE_STRUCTURES 459 460 461/* Various object display routines for debug */ 462 463#define ACPI_DUMP_STACK_ENTRY(a) AcpiExDumpOperand((a), 0) 464#define ACPI_DUMP_OPERANDS(a, b ,c) AcpiExDumpOperands(a, b, c) 465#define ACPI_DUMP_ENTRY(a, b) AcpiNsDumpEntry (a, b) 466#define ACPI_DUMP_PATHNAME(a, b, c, d) AcpiNsDumpPathname(a, b, c, d) 467#define ACPI_DUMP_BUFFER(a, b) AcpiUtDumpBuffer((UINT8 *) a, b, DB_BYTE_DISPLAY, _COMPONENT) 468 469#else 470/* 471 * This is the non-debug case -- make everything go away, 472 * leaving no executable debug code! 473 */ 474#define ACPI_DEBUG_EXEC(a) 475#define ACPI_DEBUG_ONLY_MEMBERS(a) 476#define ACPI_FUNCTION_TRACE(a) 477#define ACPI_FUNCTION_TRACE_PTR(a, b) 478#define ACPI_FUNCTION_TRACE_U32(a, b) 479#define ACPI_FUNCTION_TRACE_STR(a, b) 480#define ACPI_FUNCTION_EXIT 481#define ACPI_FUNCTION_STATUS_EXIT(s) 482#define ACPI_FUNCTION_VALUE_EXIT(s) 483#define ACPI_FUNCTION_ENTRY() 484#define ACPI_DUMP_STACK_ENTRY(a) 485#define ACPI_DUMP_OPERANDS(a, b, c) 486#define ACPI_DUMP_ENTRY(a, b) 487#define ACPI_DUMP_TABLES(a, b) 488#define ACPI_DUMP_PATHNAME(a, b, c, d) 489#define ACPI_DUMP_BUFFER(a, b) 490#define ACPI_DEBUG_PRINT(pl) 491#define ACPI_DEBUG_PRINT_RAW(pl) 492 493#define return_VOID return 494#define return_ACPI_STATUS(s) return(s) 495#define return_VALUE(s) return(s) 496#define return_UINT8(s) return(s) 497#define return_UINT32(s) return(s) 498#define return_PTR(s) return(s) 499 500#endif /* ACPI_DEBUG_OUTPUT */ 501 502 503#if (!ACPI_REDUCED_HARDWARE) 504#define ACPI_HW_OPTIONAL_FUNCTION(addr) addr 505#else 506#define ACPI_HW_OPTIONAL_FUNCTION(addr) NULL 507#endif 508 509 510/* 511 * Some code only gets executed when the debugger is built in. 512 * Note that this is entirely independent of whether the 513 * DEBUG_PRINT stuff (set by ACPI_DEBUG_OUTPUT) is on, or not. 514 */ 515#ifdef ACPI_DEBUGGER 516#define ACPI_DEBUGGER_EXEC(a) a 517#else 518#define ACPI_DEBUGGER_EXEC(a) 519#endif 520 521 522/* 523 * Memory allocation tracking (DEBUG ONLY) 524 */ 525#define ACPI_MEM_PARAMETERS _COMPONENT, _AcpiModuleName, __LINE__ 526 527#ifndef ACPI_DBG_TRACK_ALLOCATIONS 528 529/* Memory allocation */ 530 531#define ACPI_ALLOCATE(a) AcpiUtAllocate((ACPI_SIZE) (a), ACPI_MEM_PARAMETERS) 532#define ACPI_ALLOCATE_ZEROED(a) AcpiUtAllocateZeroed((ACPI_SIZE) (a), ACPI_MEM_PARAMETERS) 533#define ACPI_FREE(a) AcpiOsFree(a) 534#define ACPI_MEM_TRACKING(a) 535 536#else 537 538/* Memory allocation */ 539 540#define ACPI_ALLOCATE(a) AcpiUtAllocateAndTrack((ACPI_SIZE) (a), ACPI_MEM_PARAMETERS) 541#define ACPI_ALLOCATE_ZEROED(a) AcpiUtAllocateZeroedAndTrack((ACPI_SIZE) (a), ACPI_MEM_PARAMETERS) 542#define ACPI_FREE(a) AcpiUtFreeAndTrack(a, ACPI_MEM_PARAMETERS) 543#define ACPI_MEM_TRACKING(a) a 544 545#endif /* ACPI_DBG_TRACK_ALLOCATIONS */ 546 547 548/* 549 * Macros used for ACPICA utilities only 550 */ 551 552/* Generate a UUID */ 553 554#define ACPI_INIT_UUID(a, b, c, d0, d1, d2, d3, d4, d5, d6, d7) \ 555 (a) & 0xFF, ((a) >> 8) & 0xFF, ((a) >> 16) & 0xFF, ((a) >> 24) & 0xFF, \ 556 (b) & 0xFF, ((b) >> 8) & 0xFF, \ 557 (c) & 0xFF, ((c) >> 8) & 0xFF, \ 558 (d0), (d1), (d2), (d3), (d4), (d5), (d6), (d7) 559 560#define ACPI_IS_OCTAL_DIGIT(d) (((char)(d) >= '0') && ((char)(d) <= '7')) 561 562 563#endif /* ACMACROS_H */
|