1/****************************************************************************** 2 *
|
3 * Module Name: utxface - External interfaces for "global" ACPI functions
|
3 * Module Name: utxface - External interfaces, miscellaneous utility functions |
4 * 5 *****************************************************************************/ 6 7/* 8 * Copyright (C) 2000 - 2012, Intel Corp. 9 * All rights reserved. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions, and the following disclaimer, 16 * without modification. 17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 18 * substantially similar to the "NO WARRANTY" disclaimer below 19 * ("Disclaimer") and any redistribution must be conditioned upon 20 * including a substantially similar Disclaimer requirement for further 21 * binary redistribution. 22 * 3. Neither the names of the above-listed copyright holders nor the names 23 * of any contributors may be used to endorse or promote products derived 24 * from this software without specific prior written permission. 25 * 26 * Alternatively, this software may be distributed under the terms of the 27 * GNU General Public License ("GPL") version 2 as published by the Free 28 * Software Foundation. 29 * 30 * NO WARRANTY 31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 41 * POSSIBILITY OF SUCH DAMAGES. 42 */ 43 44 45#define __UTXFACE_C__ 46 47#include <contrib/dev/acpica/include/acpi.h> 48#include <contrib/dev/acpica/include/accommon.h>
|
49#include <contrib/dev/acpica/include/acevents.h>
50#include <contrib/dev/acpica/include/acnamesp.h>
|
49#include <contrib/dev/acpica/include/acdebug.h>
|
52#include <contrib/dev/acpica/include/actables.h>
|
50 51#define _COMPONENT ACPI_UTILITIES 52 ACPI_MODULE_NAME ("utxface") 53 54
|
58#ifndef ACPI_ASL_COMPILER
|
55/******************************************************************************* 56 *
|
61 * FUNCTION: AcpiInitializeSubsystem
62 *
63 * PARAMETERS: None
64 *
65 * RETURN: Status
66 *
67 * DESCRIPTION: Initializes all global variables. This is the first function
68 * called, so any early initialization belongs here.
69 *
70 ******************************************************************************/
71
72ACPI_STATUS
73AcpiInitializeSubsystem (
74 void)
75{
76 ACPI_STATUS Status;
77
78
79 ACPI_FUNCTION_TRACE (AcpiInitializeSubsystem);
80
81
82 AcpiGbl_StartupFlags = ACPI_SUBSYSTEM_INITIALIZE;
83 ACPI_DEBUG_EXEC (AcpiUtInitStackPtrTrace ());
84
85 /* Initialize the OS-Dependent layer */
86
87 Status = AcpiOsInitialize ();
88 if (ACPI_FAILURE (Status))
89 {
90 ACPI_EXCEPTION ((AE_INFO, Status, "During OSL initialization"));
91 return_ACPI_STATUS (Status);
92 }
93
94 /* Initialize all globals used by the subsystem */
95
96 Status = AcpiUtInitGlobals ();
97 if (ACPI_FAILURE (Status))
98 {
99 ACPI_EXCEPTION ((AE_INFO, Status, "During initialization of globals"));
100 return_ACPI_STATUS (Status);
101 }
102
103 /* Create the default mutex objects */
104
105 Status = AcpiUtMutexInitialize ();
106 if (ACPI_FAILURE (Status))
107 {
108 ACPI_EXCEPTION ((AE_INFO, Status, "During Global Mutex creation"));
109 return_ACPI_STATUS (Status);
110 }
111
112 /*
113 * Initialize the namespace manager and
114 * the root of the namespace tree
115 */
116 Status = AcpiNsRootInitialize ();
117 if (ACPI_FAILURE (Status))
118 {
119 ACPI_EXCEPTION ((AE_INFO, Status, "During Namespace initialization"));
120 return_ACPI_STATUS (Status);
121 }
122
123 /* Initialize the global OSI interfaces list with the static names */
124
125 Status = AcpiUtInitializeInterfaces ();
126 if (ACPI_FAILURE (Status))
127 {
128 ACPI_EXCEPTION ((AE_INFO, Status, "During OSI interfaces initialization"));
129 return_ACPI_STATUS (Status);
130 }
131
132 /* If configured, initialize the AML debugger */
133
134 ACPI_DEBUGGER_EXEC (Status = AcpiDbInitialize ());
135 return_ACPI_STATUS (Status);
136}
137
138ACPI_EXPORT_SYMBOL (AcpiInitializeSubsystem)
139
140
141/*******************************************************************************
142 *
143 * FUNCTION: AcpiEnableSubsystem
144 *
145 * PARAMETERS: Flags - Init/enable Options
146 *
147 * RETURN: Status
148 *
149 * DESCRIPTION: Completes the subsystem initialization including hardware.
150 * Puts system into ACPI mode if it isn't already.
151 *
152 ******************************************************************************/
153
154ACPI_STATUS
155AcpiEnableSubsystem (
156 UINT32 Flags)
157{
158 ACPI_STATUS Status = AE_OK;
159
160
161 ACPI_FUNCTION_TRACE (AcpiEnableSubsystem);
162
163
164#if (!ACPI_REDUCED_HARDWARE)
165
166 /* Enable ACPI mode */
167
168 if (!(Flags & ACPI_NO_ACPI_ENABLE))
169 {
170 ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "[Init] Going into ACPI mode\n"));
171
172 AcpiGbl_OriginalMode = AcpiHwGetMode();
173
174 Status = AcpiEnable ();
175 if (ACPI_FAILURE (Status))
176 {
177 ACPI_WARNING ((AE_INFO, "AcpiEnable failed"));
178 return_ACPI_STATUS (Status);
179 }
180 }
181
182 /*
183 * Obtain a permanent mapping for the FACS. This is required for the
184 * Global Lock and the Firmware Waking Vector
185 */
186 Status = AcpiTbInitializeFacs ();
187 if (ACPI_FAILURE (Status))
188 {
189 ACPI_WARNING ((AE_INFO, "Could not map the FACS table"));
190 return_ACPI_STATUS (Status);
191 }
192
193#endif /* !ACPI_REDUCED_HARDWARE */
194
195 /*
196 * Install the default OpRegion handlers. These are installed unless
197 * other handlers have already been installed via the
198 * InstallAddressSpaceHandler interface.
199 */
200 if (!(Flags & ACPI_NO_ADDRESS_SPACE_INIT))
201 {
202 ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,
203 "[Init] Installing default address space handlers\n"));
204
205 Status = AcpiEvInstallRegionHandlers ();
206 if (ACPI_FAILURE (Status))
207 {
208 return_ACPI_STATUS (Status);
209 }
210 }
211
212#if (!ACPI_REDUCED_HARDWARE)
213 /*
214 * Initialize ACPI Event handling (Fixed and General Purpose)
215 *
216 * Note1: We must have the hardware and events initialized before we can
217 * execute any control methods safely. Any control method can require
218 * ACPI hardware support, so the hardware must be fully initialized before
219 * any method execution!
220 *
221 * Note2: Fixed events are initialized and enabled here. GPEs are
222 * initialized, but cannot be enabled until after the hardware is
223 * completely initialized (SCI and GlobalLock activated) and the various
224 * initialization control methods are run (_REG, _STA, _INI) on the
225 * entire namespace.
226 */
227 if (!(Flags & ACPI_NO_EVENT_INIT))
228 {
229 ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,
230 "[Init] Initializing ACPI events\n"));
231
232 Status = AcpiEvInitializeEvents ();
233 if (ACPI_FAILURE (Status))
234 {
235 return_ACPI_STATUS (Status);
236 }
237 }
238
239 /*
240 * Install the SCI handler and Global Lock handler. This completes the
241 * hardware initialization.
242 */
243 if (!(Flags & ACPI_NO_HANDLER_INIT))
244 {
245 ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,
246 "[Init] Installing SCI/GL handlers\n"));
247
248 Status = AcpiEvInstallXruptHandlers ();
249 if (ACPI_FAILURE (Status))
250 {
251 return_ACPI_STATUS (Status);
252 }
253 }
254
255#endif /* !ACPI_REDUCED_HARDWARE */
256
257 return_ACPI_STATUS (Status);
258}
259
260ACPI_EXPORT_SYMBOL (AcpiEnableSubsystem)
261
262
263/*******************************************************************************
264 *
265 * FUNCTION: AcpiInitializeObjects
266 *
267 * PARAMETERS: Flags - Init/enable Options
268 *
269 * RETURN: Status
270 *
271 * DESCRIPTION: Completes namespace initialization by initializing device
272 * objects and executing AML code for Regions, buffers, etc.
273 *
274 ******************************************************************************/
275
276ACPI_STATUS
277AcpiInitializeObjects (
278 UINT32 Flags)
279{
280 ACPI_STATUS Status = AE_OK;
281
282
283 ACPI_FUNCTION_TRACE (AcpiInitializeObjects);
284
285
286 /*
287 * Run all _REG methods
288 *
289 * Note: Any objects accessed by the _REG methods will be automatically
290 * initialized, even if they contain executable AML (see the call to
291 * AcpiNsInitializeObjects below).
292 */
293 if (!(Flags & ACPI_NO_ADDRESS_SPACE_INIT))
294 {
295 ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,
296 "[Init] Executing _REG OpRegion methods\n"));
297
298 Status = AcpiEvInitializeOpRegions ();
299 if (ACPI_FAILURE (Status))
300 {
301 return_ACPI_STATUS (Status);
302 }
303 }
304
305 /*
306 * Execute any module-level code that was detected during the table load
307 * phase. Although illegal since ACPI 2.0, there are many machines that
308 * contain this type of code. Each block of detected executable AML code
309 * outside of any control method is wrapped with a temporary control
310 * method object and placed on a global list. The methods on this list
311 * are executed below.
312 */
313 AcpiNsExecModuleCodeList ();
314
315 /*
316 * Initialize the objects that remain uninitialized. This runs the
317 * executable AML that may be part of the declaration of these objects:
318 * OperationRegions, BufferFields, Buffers, and Packages.
319 */
320 if (!(Flags & ACPI_NO_OBJECT_INIT))
321 {
322 ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,
323 "[Init] Completing Initialization of ACPI Objects\n"));
324
325 Status = AcpiNsInitializeObjects ();
326 if (ACPI_FAILURE (Status))
327 {
328 return_ACPI_STATUS (Status);
329 }
330 }
331
332 /*
333 * Initialize all device objects in the namespace. This runs the device
334 * _STA and _INI methods.
335 */
336 if (!(Flags & ACPI_NO_DEVICE_INIT))
337 {
338 ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,
339 "[Init] Initializing ACPI Devices\n"));
340
341 Status = AcpiNsInitializeDevices ();
342 if (ACPI_FAILURE (Status))
343 {
344 return_ACPI_STATUS (Status);
345 }
346 }
347
348 /*
349 * Empty the caches (delete the cached objects) on the assumption that
350 * the table load filled them up more than they will be at runtime --
351 * thus wasting non-paged memory.
352 */
353 Status = AcpiPurgeCachedObjects ();
354
355 AcpiGbl_StartupFlags |= ACPI_INITIALIZED_OK;
356 return_ACPI_STATUS (Status);
357}
358
359ACPI_EXPORT_SYMBOL (AcpiInitializeObjects)
360
361
362#endif
363
364/*******************************************************************************
365 *
|
57 * FUNCTION: AcpiTerminate 58 * 59 * PARAMETERS: None 60 * 61 * RETURN: Status 62 * 63 * DESCRIPTION: Shutdown the ACPICA subsystem and release all resources. 64 * 65 ******************************************************************************/ 66 67ACPI_STATUS 68AcpiTerminate ( 69 void) 70{ 71 ACPI_STATUS Status; 72 73 74 ACPI_FUNCTION_TRACE (AcpiTerminate); 75 76 77 /* Just exit if subsystem is already shutdown */ 78 79 if (AcpiGbl_Shutdown) 80 { 81 ACPI_ERROR ((AE_INFO, "ACPI Subsystem is already terminated")); 82 return_ACPI_STATUS (AE_OK); 83 } 84 85 /* Subsystem appears active, go ahead and shut it down */ 86 87 AcpiGbl_Shutdown = TRUE; 88 AcpiGbl_StartupFlags = 0; 89 ACPI_DEBUG_PRINT ((ACPI_DB_INFO, "Shutting down ACPI Subsystem\n")); 90 91 /* Terminate the AML Debugger if present */ 92 93 ACPI_DEBUGGER_EXEC (AcpiGbl_DbTerminateThreads = TRUE); 94 95 /* Shutdown and free all resources */ 96 97 AcpiUtSubsystemShutdown (); 98 99 /* Free the mutex objects */ 100 101 AcpiUtMutexTerminate (); 102 103 104#ifdef ACPI_DEBUGGER 105 106 /* Shut down the debugger */ 107 108 AcpiDbTerminate (); 109#endif 110 111 /* Now we can shutdown the OS-dependent layer */ 112 113 Status = AcpiOsTerminate (); 114 return_ACPI_STATUS (Status); 115} 116 117ACPI_EXPORT_SYMBOL (AcpiTerminate) 118 119 120#ifndef ACPI_ASL_COMPILER 121/******************************************************************************* 122 * 123 * FUNCTION: AcpiSubsystemStatus 124 * 125 * PARAMETERS: None 126 * 127 * RETURN: Status of the ACPI subsystem 128 * 129 * DESCRIPTION: Other drivers that use the ACPI subsystem should call this 130 * before making any other calls, to ensure the subsystem 131 * initialized successfully. 132 * 133 ******************************************************************************/ 134 135ACPI_STATUS 136AcpiSubsystemStatus ( 137 void) 138{ 139 140 if (AcpiGbl_StartupFlags & ACPI_INITIALIZED_OK) 141 { 142 return (AE_OK); 143 } 144 else 145 { 146 return (AE_ERROR); 147 } 148} 149 150ACPI_EXPORT_SYMBOL (AcpiSubsystemStatus) 151 152 153/******************************************************************************* 154 * 155 * FUNCTION: AcpiGetSystemInfo 156 * 157 * PARAMETERS: OutBuffer - A buffer to receive the resources for the 158 * device 159 * 160 * RETURN: Status - the status of the call 161 * 162 * DESCRIPTION: This function is called to get information about the current 163 * state of the ACPI subsystem. It will return system information 164 * in the OutBuffer. 165 * 166 * If the function fails an appropriate status will be returned 167 * and the value of OutBuffer is undefined. 168 * 169 ******************************************************************************/ 170 171ACPI_STATUS 172AcpiGetSystemInfo ( 173 ACPI_BUFFER *OutBuffer) 174{ 175 ACPI_SYSTEM_INFO *InfoPtr; 176 ACPI_STATUS Status; 177 178 179 ACPI_FUNCTION_TRACE (AcpiGetSystemInfo); 180 181 182 /* Parameter validation */ 183 184 Status = AcpiUtValidateBuffer (OutBuffer); 185 if (ACPI_FAILURE (Status)) 186 { 187 return_ACPI_STATUS (Status); 188 } 189 190 /* Validate/Allocate/Clear caller buffer */ 191 192 Status = AcpiUtInitializeBuffer (OutBuffer, sizeof (ACPI_SYSTEM_INFO)); 193 if (ACPI_FAILURE (Status)) 194 { 195 return_ACPI_STATUS (Status); 196 } 197 198 /* 199 * Populate the return buffer 200 */ 201 InfoPtr = (ACPI_SYSTEM_INFO *) OutBuffer->Pointer; 202 203 InfoPtr->AcpiCaVersion = ACPI_CA_VERSION; 204 205 /* System flags (ACPI capabilities) */ 206 207 InfoPtr->Flags = ACPI_SYS_MODE_ACPI; 208 209 /* Timer resolution - 24 or 32 bits */ 210 211 if (AcpiGbl_FADT.Flags & ACPI_FADT_32BIT_TIMER) 212 { 213 InfoPtr->TimerResolution = 24; 214 } 215 else 216 { 217 InfoPtr->TimerResolution = 32; 218 } 219 220 /* Clear the reserved fields */ 221 222 InfoPtr->Reserved1 = 0; 223 InfoPtr->Reserved2 = 0; 224 225 /* Current debug levels */ 226 227 InfoPtr->DebugLayer = AcpiDbgLayer; 228 InfoPtr->DebugLevel = AcpiDbgLevel; 229 230 return_ACPI_STATUS (AE_OK); 231} 232 233ACPI_EXPORT_SYMBOL (AcpiGetSystemInfo) 234 235 236/******************************************************************************* 237 * 238 * FUNCTION: AcpiGetStatistics 239 * 240 * PARAMETERS: Stats - Where the statistics are returned 241 * 242 * RETURN: Status - the status of the call 243 * 244 * DESCRIPTION: Get the contents of the various system counters 245 * 246 ******************************************************************************/ 247 248ACPI_STATUS 249AcpiGetStatistics ( 250 ACPI_STATISTICS *Stats) 251{ 252 ACPI_FUNCTION_TRACE (AcpiGetStatistics); 253 254 255 /* Parameter validation */ 256 257 if (!Stats) 258 { 259 return_ACPI_STATUS (AE_BAD_PARAMETER); 260 } 261 262 /* Various interrupt-based event counters */ 263 264 Stats->SciCount = AcpiSciCount; 265 Stats->GpeCount = AcpiGpeCount; 266 267 ACPI_MEMCPY (Stats->FixedEventCount, AcpiFixedEventCount, 268 sizeof (AcpiFixedEventCount)); 269 270 271 /* Other counters */ 272 273 Stats->MethodCount = AcpiMethodCount; 274 275 return_ACPI_STATUS (AE_OK); 276} 277 278ACPI_EXPORT_SYMBOL (AcpiGetStatistics) 279 280 281/***************************************************************************** 282 * 283 * FUNCTION: AcpiInstallInitializationHandler 284 * 285 * PARAMETERS: Handler - Callback procedure 286 * Function - Not (currently) used, see below 287 * 288 * RETURN: Status 289 * 290 * DESCRIPTION: Install an initialization handler 291 * 292 * TBD: When a second function is added, must save the Function also. 293 * 294 ****************************************************************************/ 295 296ACPI_STATUS 297AcpiInstallInitializationHandler ( 298 ACPI_INIT_HANDLER Handler, 299 UINT32 Function) 300{ 301 302 if (!Handler) 303 { 304 return (AE_BAD_PARAMETER); 305 } 306 307 if (AcpiGbl_InitHandler) 308 { 309 return (AE_ALREADY_EXISTS); 310 } 311 312 AcpiGbl_InitHandler = Handler; 313 return AE_OK; 314} 315 316ACPI_EXPORT_SYMBOL (AcpiInstallInitializationHandler) 317 318 319/***************************************************************************** 320 * 321 * FUNCTION: AcpiPurgeCachedObjects 322 * 323 * PARAMETERS: None 324 * 325 * RETURN: Status 326 * 327 * DESCRIPTION: Empty all caches (delete the cached objects) 328 * 329 ****************************************************************************/ 330 331ACPI_STATUS 332AcpiPurgeCachedObjects ( 333 void) 334{ 335 ACPI_FUNCTION_TRACE (AcpiPurgeCachedObjects); 336 337 (void) AcpiOsPurgeCache (AcpiGbl_StateCache); 338 (void) AcpiOsPurgeCache (AcpiGbl_OperandCache); 339 (void) AcpiOsPurgeCache (AcpiGbl_PsNodeCache); 340 (void) AcpiOsPurgeCache (AcpiGbl_PsNodeExtCache); 341 return_ACPI_STATUS (AE_OK); 342} 343 344ACPI_EXPORT_SYMBOL (AcpiPurgeCachedObjects) 345 346 347/***************************************************************************** 348 * 349 * FUNCTION: AcpiInstallInterface 350 * 351 * PARAMETERS: InterfaceName - The interface to install 352 * 353 * RETURN: Status 354 * 355 * DESCRIPTION: Install an _OSI interface to the global list 356 * 357 ****************************************************************************/ 358 359ACPI_STATUS 360AcpiInstallInterface ( 361 ACPI_STRING InterfaceName) 362{ 363 ACPI_STATUS Status; 364 ACPI_INTERFACE_INFO *InterfaceInfo; 365 366 367 /* Parameter validation */ 368 369 if (!InterfaceName || (ACPI_STRLEN (InterfaceName) == 0)) 370 { 371 return (AE_BAD_PARAMETER); 372 } 373 374 (void) AcpiOsAcquireMutex (AcpiGbl_OsiMutex, ACPI_WAIT_FOREVER); 375 376 /* Check if the interface name is already in the global list */ 377 378 InterfaceInfo = AcpiUtGetInterface (InterfaceName); 379 if (InterfaceInfo) 380 { 381 /* 382 * The interface already exists in the list. This is OK if the 383 * interface has been marked invalid -- just clear the bit. 384 */ 385 if (InterfaceInfo->Flags & ACPI_OSI_INVALID) 386 { 387 InterfaceInfo->Flags &= ~ACPI_OSI_INVALID; 388 Status = AE_OK; 389 } 390 else 391 { 392 Status = AE_ALREADY_EXISTS; 393 } 394 } 395 else 396 { 397 /* New interface name, install into the global list */ 398 399 Status = AcpiUtInstallInterface (InterfaceName); 400 } 401 402 AcpiOsReleaseMutex (AcpiGbl_OsiMutex); 403 return (Status); 404} 405 406ACPI_EXPORT_SYMBOL (AcpiInstallInterface) 407 408 409/***************************************************************************** 410 * 411 * FUNCTION: AcpiRemoveInterface 412 * 413 * PARAMETERS: InterfaceName - The interface to remove 414 * 415 * RETURN: Status 416 * 417 * DESCRIPTION: Remove an _OSI interface from the global list 418 * 419 ****************************************************************************/ 420 421ACPI_STATUS 422AcpiRemoveInterface ( 423 ACPI_STRING InterfaceName) 424{ 425 ACPI_STATUS Status; 426 427 428 /* Parameter validation */ 429 430 if (!InterfaceName || (ACPI_STRLEN (InterfaceName) == 0)) 431 { 432 return (AE_BAD_PARAMETER); 433 } 434 435 (void) AcpiOsAcquireMutex (AcpiGbl_OsiMutex, ACPI_WAIT_FOREVER); 436 437 Status = AcpiUtRemoveInterface (InterfaceName); 438 439 AcpiOsReleaseMutex (AcpiGbl_OsiMutex); 440 return (Status); 441} 442 443ACPI_EXPORT_SYMBOL (AcpiRemoveInterface) 444 445 446/***************************************************************************** 447 * 448 * FUNCTION: AcpiInstallInterfaceHandler 449 * 450 * PARAMETERS: Handler - The _OSI interface handler to install 451 * NULL means "remove existing handler" 452 * 453 * RETURN: Status 454 * 455 * DESCRIPTION: Install a handler for the predefined _OSI ACPI method. 456 * invoked during execution of the internal implementation of 457 * _OSI. A NULL handler simply removes any existing handler. 458 * 459 ****************************************************************************/ 460 461ACPI_STATUS 462AcpiInstallInterfaceHandler ( 463 ACPI_INTERFACE_HANDLER Handler) 464{ 465 ACPI_STATUS Status = AE_OK; 466 467 468 (void) AcpiOsAcquireMutex (AcpiGbl_OsiMutex, ACPI_WAIT_FOREVER); 469 470 if (Handler && AcpiGbl_InterfaceHandler) 471 { 472 Status = AE_ALREADY_EXISTS; 473 } 474 else 475 { 476 AcpiGbl_InterfaceHandler = Handler; 477 } 478 479 AcpiOsReleaseMutex (AcpiGbl_OsiMutex); 480 return (Status); 481} 482 483ACPI_EXPORT_SYMBOL (AcpiInstallInterfaceHandler) 484 485 486/***************************************************************************** 487 * 488 * FUNCTION: AcpiCheckAddressRange 489 * 490 * PARAMETERS: SpaceId - Address space ID 491 * Address - Start address 492 * Length - Length 493 * Warn - TRUE if warning on overlap desired 494 * 495 * RETURN: Count of the number of conflicts detected. 496 * 497 * DESCRIPTION: Check if the input address range overlaps any of the 498 * ASL operation region address ranges. 499 * 500 ****************************************************************************/ 501 502UINT32 503AcpiCheckAddressRange ( 504 ACPI_ADR_SPACE_TYPE SpaceId, 505 ACPI_PHYSICAL_ADDRESS Address, 506 ACPI_SIZE Length, 507 BOOLEAN Warn) 508{ 509 UINT32 Overlaps; 510 ACPI_STATUS Status; 511 512 513 Status = AcpiUtAcquireMutex (ACPI_MTX_NAMESPACE); 514 if (ACPI_FAILURE (Status)) 515 { 516 return (0); 517 } 518 519 Overlaps = AcpiUtCheckAddressRange (SpaceId, Address, 520 (UINT32) Length, Warn); 521 522 (void) AcpiUtReleaseMutex (ACPI_MTX_NAMESPACE); 523 return (Overlaps); 524} 525 526ACPI_EXPORT_SYMBOL (AcpiCheckAddressRange) 527 528#endif /* !ACPI_ASL_COMPILER */
|
529 530 531/******************************************************************************* 532 * 533 * FUNCTION: AcpiDecodePldBuffer 534 * 535 * PARAMETERS: InBuffer - Buffer returned by _PLD method 536 * Length - Length of the InBuffer 537 * ReturnBuffer - Where the decode buffer is returned 538 * 539 * RETURN: Status and the decoded _PLD buffer. User must deallocate 540 * the buffer via ACPI_FREE. 541 * 542 * DESCRIPTION: Decode the bit-packed buffer returned by the _PLD method into 543 * a local struct that is much more useful to an ACPI driver. 544 * 545 ******************************************************************************/ 546 547ACPI_STATUS 548AcpiDecodePldBuffer ( 549 UINT8 *InBuffer, 550 ACPI_SIZE Length, 551 ACPI_PLD_INFO **ReturnBuffer) 552{ 553 ACPI_PLD_INFO *PldInfo; 554 UINT32 *Buffer = ACPI_CAST_PTR (UINT32, InBuffer); 555 UINT32 Dword; 556 557 558 /* Parameter validation */ 559 560 if (!InBuffer || !ReturnBuffer || (Length < 16)) 561 { 562 return (AE_BAD_PARAMETER); 563 } 564 565 PldInfo = ACPI_ALLOCATE_ZEROED (sizeof (ACPI_PLD_INFO)); 566 if (!PldInfo) 567 { 568 return (AE_NO_MEMORY); 569 } 570 571 /* First 32-bit DWord */ 572 573 ACPI_MOVE_32_TO_32 (&Dword, &Buffer[0]); 574 PldInfo->Revision = ACPI_PLD_GET_REVISION (&Dword); 575 PldInfo->IgnoreColor = ACPI_PLD_GET_IGNORE_COLOR (&Dword); 576 PldInfo->Color = ACPI_PLD_GET_COLOR (&Dword); 577 578 /* Second 32-bit DWord */ 579 580 ACPI_MOVE_32_TO_32 (&Dword, &Buffer[1]); 581 PldInfo->Width = ACPI_PLD_GET_WIDTH (&Dword); 582 PldInfo->Height = ACPI_PLD_GET_HEIGHT(&Dword); 583 584 /* Third 32-bit DWord */ 585 586 ACPI_MOVE_32_TO_32 (&Dword, &Buffer[2]); 587 PldInfo->UserVisible = ACPI_PLD_GET_USER_VISIBLE (&Dword); 588 PldInfo->Dock = ACPI_PLD_GET_DOCK (&Dword); 589 PldInfo->Lid = ACPI_PLD_GET_LID (&Dword); 590 PldInfo->Panel = ACPI_PLD_GET_PANEL (&Dword); 591 PldInfo->VerticalPosition = ACPI_PLD_GET_VERTICAL (&Dword); 592 PldInfo->HorizontalPosition = ACPI_PLD_GET_HORIZONTAL (&Dword); 593 PldInfo->Shape = ACPI_PLD_GET_SHAPE (&Dword); 594 PldInfo->GroupOrientation = ACPI_PLD_GET_ORIENTATION (&Dword); 595 PldInfo->GroupToken = ACPI_PLD_GET_TOKEN (&Dword); 596 PldInfo->GroupPosition = ACPI_PLD_GET_POSITION (&Dword); 597 PldInfo->Bay = ACPI_PLD_GET_BAY (&Dword); 598 599 /* Fourth 32-bit DWord */ 600 601 ACPI_MOVE_32_TO_32 (&Dword, &Buffer[3]); 602 PldInfo->Ejectable = ACPI_PLD_GET_EJECTABLE (&Dword); 603 PldInfo->OspmEjectRequired = ACPI_PLD_GET_OSPM_EJECT (&Dword); 604 PldInfo->CabinetNumber = ACPI_PLD_GET_CABINET (&Dword); 605 PldInfo->CardCageNumber = ACPI_PLD_GET_CARD_CAGE (&Dword); 606 PldInfo->Reference = ACPI_PLD_GET_REFERENCE (&Dword); 607 PldInfo->Rotation = ACPI_PLD_GET_ROTATION (&Dword); 608 PldInfo->Order = ACPI_PLD_GET_ORDER (&Dword); 609 610 if (Length >= ACPI_PLD_BUFFER_SIZE) 611 { 612 /* Fifth 32-bit DWord (Revision 2 of _PLD) */ 613 614 ACPI_MOVE_32_TO_32 (&Dword, &Buffer[4]); 615 PldInfo->VerticalOffset = ACPI_PLD_GET_VERT_OFFSET (&Dword); 616 PldInfo->HorizontalOffset = ACPI_PLD_GET_HORIZ_OFFSET (&Dword); 617 } 618 619 *ReturnBuffer = PldInfo; 620 return (AE_OK); 621} 622 623ACPI_EXPORT_SYMBOL (AcpiDecodePldBuffer) |
|