1# $FreeBSD: head/sys/conf/options 237522 2012-06-24 07:01:49Z adrian $
2#
3# On the handling of kernel options
4#
5# All kernel options should be listed in NOTES, with suitable
6# descriptions. Negative options (options that make some code not
7# compile) should be commented out; LINT (generated from NOTES) should
8# compile as much code as possible. Try to structure option-using
9# code so that a single option only switch code on, or only switch
10# code off, to make it possible to have a full compile-test. If
11# necessary, you can check for COMPILING_LINT to get maximum code
12# coverage.
13#
14# All new options shall also be listed in either "conf/options" or
15# "conf/options.<machine>". Options that affect a single source-file
16# <xxx>.[c|s] should be directed into "opt_<xxx>.h", while options
17# that affect multiple files should either go in "opt_global.h" if
18# this is a kernel-wide option (used just about everywhere), or in
19# "opt_<option-name-in-lower-case>.h" if it affects only some files.
20# Note that the effect of listing only an option without a
21# header-file-name in conf/options (and cousins) is that the last
22# convention is followed.
23#
24# This handling scheme is not yet fully implemented.
25#
26#
27# Format of this file:
28# Option name filename
29#
30# If filename is missing, the default is
31# opt_<name-of-option-in-lower-case>.h
32
33AAC_DEBUG opt_aac.h
34AHC_ALLOW_MEMIO opt_aic7xxx.h
35AHC_TMODE_ENABLE opt_aic7xxx.h
36AHC_DUMP_EEPROM opt_aic7xxx.h
37AHC_DEBUG opt_aic7xxx.h
38AHC_DEBUG_OPTS opt_aic7xxx.h
39AHC_REG_PRETTY_PRINT opt_aic7xxx.h
40AHD_DEBUG opt_aic79xx.h
41AHD_DEBUG_OPTS opt_aic79xx.h
42AHD_TMODE_ENABLE opt_aic79xx.h
43AHD_REG_PRETTY_PRINT opt_aic79xx.h
44ADW_ALLOW_MEMIO opt_adw.h
45
46TWA_DEBUG opt_twa.h
47TWA_FLASH_FIRMWARE opt_twa.h
48
49# Debugging options.
50ALT_BREAK_TO_DEBUGGER opt_kdb.h
51BREAK_TO_DEBUGGER opt_kdb.h
52DDB
53DDB_BUFR_SIZE opt_ddb.h
54DDB_CAPTURE_DEFAULTBUFSIZE opt_ddb.h
55DDB_CAPTURE_MAXBUFSIZE opt_ddb.h
56DDB_CTF opt_ddb.h
57DDB_NUMSYM opt_ddb.h
58GDB
59KDB opt_global.h
60KDB_TRACE opt_kdb.h
61KDB_UNATTENDED opt_kdb.h
62KLD_DEBUG opt_kld.h
63SYSCTL_DEBUG opt_sysctl.h
64
65# Miscellaneous options.
66ADAPTIVE_LOCKMGRS
67ALQ
68AUDIT opt_global.h
69CAPABILITIES opt_capsicum.h
70CAPABILITY_MODE opt_capsicum.h
71CODA_COMPAT_5 opt_coda.h
72COMPAT_43 opt_compat.h
73COMPAT_43TTY opt_compat.h
74COMPAT_FREEBSD4 opt_compat.h
75COMPAT_FREEBSD5 opt_compat.h
76COMPAT_FREEBSD6 opt_compat.h
77COMPAT_FREEBSD7 opt_compat.h
78COMPILING_LINT opt_global.h
79COMPRESS_USER_CORES opt_core.h
80CY_PCI_FASTINTR
81DEADLKRES opt_watchdog.h
82DIRECTIO
83FFCLOCK
84FULL_PREEMPTION opt_sched.h
85IPI_PREEMPTION opt_sched.h
86GEOM_AES opt_geom.h
87GEOM_BDE opt_geom.h
88GEOM_BSD opt_geom.h
89GEOM_CACHE opt_geom.h
90GEOM_CONCAT opt_geom.h
91GEOM_ELI opt_geom.h
92GEOM_FOX opt_geom.h
93GEOM_GATE opt_geom.h
94GEOM_JOURNAL opt_geom.h
95GEOM_LABEL opt_geom.h
96GEOM_LINUX_LVM opt_geom.h
97GEOM_MBR opt_geom.h
98GEOM_MIRROR opt_geom.h
99GEOM_MULTIPATH opt_geom.h
100GEOM_NOP opt_geom.h
101GEOM_PART_APM opt_geom.h
102GEOM_PART_BSD opt_geom.h
103GEOM_PART_EBR opt_geom.h
104GEOM_PART_EBR_COMPAT opt_geom.h
105GEOM_PART_GPT opt_geom.h
106GEOM_PART_LDM opt_geom.h
107GEOM_PART_MBR opt_geom.h
108GEOM_PART_PC98 opt_geom.h
109GEOM_PART_VTOC8 opt_geom.h
110GEOM_PC98 opt_geom.h
111GEOM_RAID opt_geom.h
112GEOM_RAID3 opt_geom.h
113GEOM_SHSEC opt_geom.h
114GEOM_STRIPE opt_geom.h
115GEOM_SUNLABEL opt_geom.h
116GEOM_UNCOMPRESS opt_geom.h
117GEOM_UZIP opt_geom.h
118GEOM_VIRSTOR opt_geom.h
119GEOM_VOL opt_geom.h
120GEOM_ZERO opt_geom.h
121KDTRACE_HOOKS opt_kdtrace.h
122KSTACK_MAX_PAGES
123KSTACK_PAGES
124KTRACE
125KTRACE_REQUEST_POOL opt_ktrace.h
126LIBICONV
127MAC opt_global.h
128MAC_BIBA opt_dontuse.h
129MAC_BSDEXTENDED opt_dontuse.h
130MAC_IFOFF opt_dontuse.h
131MAC_LOMAC opt_dontuse.h
132MAC_MLS opt_dontuse.h
133MAC_NONE opt_dontuse.h
134MAC_PARTITION opt_dontuse.h
135MAC_PORTACL opt_dontuse.h
136MAC_SEEOTHERUIDS opt_dontuse.h
137MAC_STATIC opt_mac.h
138MAC_STUB opt_dontuse.h
139MAC_TEST opt_dontuse.h
140MD_ROOT opt_md.h
141MD_ROOT_SIZE opt_md.h
142MFI_DEBUG opt_mfi.h
143MFI_DECODE_LOG opt_mfi.h
144MPROF_BUFFERS opt_mprof.h
145MPROF_HASH_SIZE opt_mprof.h
146NEW_PCIB opt_global.h
147NO_ADAPTIVE_MUTEXES opt_adaptive_mutexes.h
148NO_ADAPTIVE_RWLOCKS
149NO_ADAPTIVE_SX
150NO_SYSCTL_DESCR opt_global.h
151NSWBUF_MIN opt_swap.h
152MBUF_PACKET_ZONE_DISABLE opt_global.h
153PANIC_REBOOT_WAIT_TIME opt_panic.h
154PPC_DEBUG opt_ppc.h
155PPC_PROBE_CHIPSET opt_ppc.h
156PPS_SYNC opt_ntp.h
157PREEMPTION opt_sched.h
158PROCDESC opt_procdesc.h
159QUOTA
160SCHED_4BSD opt_sched.h
161SCHED_STATS opt_sched.h
162SCHED_ULE opt_sched.h
163SLEEPQUEUE_PROFILING
164SLHCI_DEBUG opt_slhci.h
165SPX_HACK
166STACK opt_stack.h
167SUIDDIR
168MSGMNB opt_sysvipc.h
169MSGMNI opt_sysvipc.h
170MSGSEG opt_sysvipc.h
171MSGSSZ opt_sysvipc.h
172MSGTQL opt_sysvipc.h
173SEMMNI opt_sysvipc.h
174SEMMNS opt_sysvipc.h
175SEMMNU opt_sysvipc.h
176SEMMSL opt_sysvipc.h
177SEMOPM opt_sysvipc.h
178SEMUME opt_sysvipc.h
179SHMALL opt_sysvipc.h
180SHMMAX opt_sysvipc.h
181SHMMAXPGS opt_sysvipc.h
182SHMMIN opt_sysvipc.h
183SHMMNI opt_sysvipc.h
184SHMSEG opt_sysvipc.h
185SYSVMSG opt_sysvipc.h
186SYSVSEM opt_sysvipc.h
187SYSVSHM opt_sysvipc.h
188SW_WATCHDOG opt_watchdog.h
189TURNSTILE_PROFILING
190UMTX_PROFILING
191VFS_AIO
192VFS_ALLOW_NONMPSAFE
193VERBOSE_SYSINIT opt_global.h
194WLCACHE opt_wavelan.h
195WLDEBUG opt_wavelan.h
196
197# POSIX kernel options
198P1003_1B_MQUEUE opt_posix.h
199P1003_1B_SEMAPHORES opt_posix.h
200_KPOSIX_PRIORITY_SCHEDULING opt_posix.h
201
202# Do we want the config file compiled into the kernel?
203INCLUDE_CONFIG_FILE opt_config.h
204
205# Options for static filesystems. These should only be used at config
206# time, since the corresponding lkms cannot work if there are any static
207# dependencies. Unusability is enforced by hiding the defines for the
208# options in a never-included header.
209CD9660 opt_dontuse.h
210CODA opt_dontuse.h
211EXT2FS opt_dontuse.h
212FDESCFS opt_dontuse.h
213FFS opt_dontuse.h
214HPFS opt_dontuse.h
215MSDOSFS opt_dontuse.h
216NANDFS opt_dontuse.h
217NTFS opt_dontuse.h
218NULLFS opt_dontuse.h
219NWFS opt_dontuse.h
220PORTALFS opt_dontuse.h
221PROCFS opt_dontuse.h
222PSEUDOFS opt_dontuse.h
223REISERFS opt_dontuse.h
224SMBFS opt_dontuse.h
225TMPFS opt_dontuse.h
226UDF opt_dontuse.h
227UNIONFS opt_dontuse.h
228
229# Pseudofs debugging
230PSEUDOFS_TRACE opt_pseudofs.h
231
232# In-kernel GSS-API
233KGSSAPI opt_kgssapi.h
234KGSSAPI_DEBUG opt_kgssapi.h
235
236# These static filesystems have one slightly bogus static dependency in
237# sys/i386/i386/autoconf.c. If any of these filesystems are
238# statically compiled into the kernel, code for mounting them as root
239# filesystems will be enabled - but look below.
240NFSCLIENT opt_nfs.h
241NFSSERVER opt_nfs.h
242
243# Use these options to compile the experimental nfs client and/or
244# server that supports NFSv4 into a kernel.
245# NFSCL - client
246# NFSD - server
247NFSCL opt_nfs.h
248NFSD opt_nfs.h
249
250# filesystems and libiconv bridge
251CD9660_ICONV opt_dontuse.h
252MSDOSFS_ICONV opt_dontuse.h
253NTFS_ICONV opt_dontuse.h
254UDF_ICONV opt_dontuse.h
255
256# If you are following the conditions in the copyright,
257# you can enable soft-updates which will speed up a lot of thigs
258# and make the system safer from crashes at the same time.
259# otherwise a STUB module will be compiled in.
260SOFTUPDATES opt_ffs.h
261
262# On small, embedded systems, it can be useful to turn off support for
263# snapshots. It saves about 30-40k for a feature that would be lightly
264# used, if it is used at all.
265NO_FFS_SNAPSHOT opt_ffs.h
266
267# Enabling this option turns on support for Access Control Lists in UFS,
268# which can be used to support high security configurations. Depends on
269# UFS_EXTATTR.
270UFS_ACL opt_ufs.h
271
272# Enabling this option turns on support for extended attributes in UFS-based
273# filesystems, which can be used to support high security configurations
274# as well as new filesystem features.
275UFS_EXTATTR opt_ufs.h
276UFS_EXTATTR_AUTOSTART opt_ufs.h
277
278# Enable fast hash lookups for large directories on UFS-based filesystems.
279UFS_DIRHASH opt_ufs.h
280
281# Enable gjournal-based UFS journal.
282UFS_GJOURNAL opt_ufs.h
283
284# The below sentence is not in English, and neither is this one.
285# We plan to remove the static dependences above, with a
286# <filesystem>_ROOT option to control if it usable as root. This list
287# allows these options to be present in config files already (though
288# they won't make any difference yet).
289NFS_ROOT opt_nfsroot.h
290
291# SMB/CIFS requester
292NETSMB opt_netsmb.h
293
294# Options used only in subr_param.c.
295HZ opt_param.h
296MAXFILES opt_param.h
297NBUF opt_param.h
298NSFBUFS opt_param.h
299VM_BCACHE_SIZE_MAX opt_param.h
300VM_SWZONE_SIZE_MAX opt_param.h
301MAXUSERS
302DFLDSIZ opt_param.h
303MAXDSIZ opt_param.h
304MAXSSIZ opt_param.h
305
306# Generic SCSI options.
307CAM_MAX_HIGHPOWER opt_cam.h
308CAMDEBUG opt_cam.h
309CAM_DEBUG_COMPILE opt_cam.h
310CAM_DEBUG_DELAY opt_cam.h
311CAM_DEBUG_BUS opt_cam.h
312CAM_DEBUG_TARGET opt_cam.h
313CAM_DEBUG_LUN opt_cam.h
314CAM_DEBUG_FLAGS opt_cam.h
315SCSI_DELAY opt_scsi.h
316SCSI_NO_SENSE_STRINGS opt_scsi.h
317SCSI_NO_OP_STRINGS opt_scsi.h
318
319# Options used only in cam/ata/ata_da.c
320ADA_TEST_FAILURE opt_ada.h
321
322# Options used only in cam/scsi/scsi_cd.c
323CHANGER_MIN_BUSY_SECONDS opt_cd.h
324CHANGER_MAX_BUSY_SECONDS opt_cd.h
325
326# Options used only in cam/scsi/scsi_sa.c.
327SA_IO_TIMEOUT opt_sa.h
328SA_SPACE_TIMEOUT opt_sa.h
329SA_REWIND_TIMEOUT opt_sa.h
330SA_ERASE_TIMEOUT opt_sa.h
331SA_1FM_AT_EOD opt_sa.h
332
333# Options used only in cam/scsi/scsi_pt.c
334SCSI_PT_DEFAULT_TIMEOUT opt_pt.h
335
336# Options used only in cam/scsi/scsi_ses.c
337SES_ENABLE_PASSTHROUGH opt_ses.h
338
339# Options used in dev/sym/ (Symbios SCSI driver).
340SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits)
341 # Allows the ncr to take precedence
342 # 1 (1<<0) -> 810a, 860
343 # 2 (1<<1) -> 825a, 875, 885, 895
344 # 4 (1<<2) -> 895a, 896, 1510d
345SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885
346 # disabled:0 (default), enabled:1
347SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking
348 # disabled:0, enabled:1 (default)
349SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported
350 # default:8, range:[1..64]
351
352# Options used only in pci/ncr.c
353SCSI_NCR_DEBUG opt_ncr.h
354SCSI_NCR_MAX_SYNC opt_ncr.h
355SCSI_NCR_MAX_WIDE opt_ncr.h
356SCSI_NCR_MYADDR opt_ncr.h
357
358# Options used only in dev/isp/*
359ISP_TARGET_MODE opt_isp.h
360ISP_FW_CRASH_DUMP opt_isp.h
361ISP_DEFAULT_ROLES opt_isp.h
362ISP_INTERNAL_TARGET opt_isp.h
363
364# Options used only in dev/iscsi
365ISCSI_INITIATOR_DEBUG opt_iscsi_initiator.h
366
367# Options used in the 'ata' ATA/ATAPI driver
368ATA_STATIC_ID opt_ata.h
369ATA_NOPCI opt_ata.h
370ATA_REQUEST_TIMEOUT opt_ata.h
371ATA_CAM opt_ata.h
372
373# Net stuff.
374ACCEPT_FILTER_DATA
375ACCEPT_FILTER_DNS
376ACCEPT_FILTER_HTTP
377ALTQ opt_global.h
378ALTQ_CBQ opt_altq.h
379ALTQ_CDNR opt_altq.h
380ALTQ_DEBUG opt_altq.h
381ALTQ_HFSC opt_altq.h
382ALTQ_NOPCC opt_altq.h
383ALTQ_PRIQ opt_altq.h
384ALTQ_RED opt_altq.h
385ALTQ_RIO opt_altq.h
386BOOTP opt_bootp.h
387BOOTP_BLOCKSIZE opt_bootp.h
388BOOTP_COMPAT opt_bootp.h
389BOOTP_NFSROOT opt_bootp.h
390BOOTP_NFSV3 opt_bootp.h
391BOOTP_WIRED_TO opt_bootp.h
392DEVICE_POLLING
393DEV_ENC opt_enc.h
394DEV_PF opt_pf.h
395DEV_PFLOG opt_pf.h
396DEV_PFSYNC opt_pf.h
397DEV_VLAN opt_vlan.h
398DUMMYNET opt_ipdn.h
399ETHER_8022 opt_ef.h
400ETHER_8023 opt_ef.h
401ETHER_II opt_ef.h
402ETHER_SNAP opt_ef.h
403INET opt_inet.h
404INET6 opt_inet6.h
405IPDIVERT
406IPFILTER opt_ipfilter.h
407IPFILTER_DEFAULT_BLOCK opt_ipfilter.h
408IPFILTER_LOG opt_ipfilter.h
409IPFILTER_LOOKUP opt_ipfilter.h
410IPFIREWALL opt_ipfw.h
411IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h
412IPFIREWALL_FORWARD opt_ipfw.h
413IPFIREWALL_NAT opt_ipfw.h
414IPFIREWALL_VERBOSE opt_ipfw.h
415IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h
416IPSEC opt_ipsec.h
417IPSEC_DEBUG opt_ipsec.h
418IPSEC_FILTERTUNNEL opt_ipsec.h
419IPSEC_NAT_T opt_ipsec.h
420IPSTEALTH
421IPX
422KRPC
423LIBALIAS
424LIBMBPOOL
425LIBMCHAIN
426MBUF_PROFILING
427MBUF_STRESS_TEST
428MROUTING opt_mrouting.h
429NCP
430NETATALK opt_atalk.h
431NFSLOCKD
432PCBGROUP opt_pcbgroup.h
433RADIX_MPATH opt_mpath.h
434ROUTETABLES opt_route.h
435SLIP_IFF_OPTS opt_slip.h
436TCPDEBUG
437TCP_OFFLOAD opt_inet.h # Enable code to dispatch TCP offloading
438TCP_SIGNATURE opt_inet.h
439VLAN_ARRAY opt_vlan.h
440XBONEHACK
441FLOWTABLE opt_route.h
442
443#
444# SCTP
445#
446SCTP opt_sctp.h
447SCTP_DEBUG opt_sctp.h # Enable debug printfs
448SCTP_WITH_NO_CSUM opt_sctp.h # Use this at your peril
449SCTP_LOCK_LOGGING opt_sctp.h # Log to KTR lock activity
450SCTP_MBUF_LOGGING opt_sctp.h # Log to KTR general mbuf aloc/free
451SCTP_MBCNT_LOGGING opt_sctp.h # Log to KTR mbcnt activity
452SCTP_PACKET_LOGGING opt_sctp.h # Log to a packet buffer last N packets
453SCTP_LTRACE_CHUNKS opt_sctp.h # Log to KTR chunks processed
454SCTP_LTRACE_ERRORS opt_sctp.h # Log to KTR error returns.
455SCTP_USE_PERCPU_STAT opt_sctp.h # Use per cpu stats.
456SCTP_MCORE_INPUT opt_sctp.h # Have multiple input threads for input mbufs
457#
458#
459#
460
461# Netgraph(4). Use option NETGRAPH to enable the base netgraph code.
462# Each netgraph node type can be either be compiled into the kernel
463# or loaded dynamically. To get the former, include the corresponding
464# option below. Each type has its own man page, e.g. ng_async(4).
465NETGRAPH
466NETGRAPH_DEBUG opt_netgraph.h
467NETGRAPH_ASYNC opt_netgraph.h
468NETGRAPH_ATMLLC opt_netgraph.h
469NETGRAPH_ATM_ATMPIF opt_netgraph.h
470NETGRAPH_BLUETOOTH opt_netgraph.h
471NETGRAPH_BLUETOOTH_BT3C opt_netgraph.h
472NETGRAPH_BLUETOOTH_H4 opt_netgraph.h
473NETGRAPH_BLUETOOTH_HCI opt_netgraph.h
474NETGRAPH_BLUETOOTH_L2CAP opt_netgraph.h
475NETGRAPH_BLUETOOTH_SOCKET opt_netgraph.h
476NETGRAPH_BLUETOOTH_UBT opt_netgraph.h
477NETGRAPH_BLUETOOTH_UBTBCMFW opt_netgraph.h
478NETGRAPH_BPF opt_netgraph.h
479NETGRAPH_BRIDGE opt_netgraph.h
480NETGRAPH_CAR opt_netgraph.h
481NETGRAPH_CISCO opt_netgraph.h
482NETGRAPH_DEFLATE opt_netgraph.h
483NETGRAPH_DEVICE opt_netgraph.h
484NETGRAPH_ECHO opt_netgraph.h
485NETGRAPH_EIFACE opt_netgraph.h
486NETGRAPH_ETHER opt_netgraph.h
487NETGRAPH_ETHER_ECHO opt_netgraph.h
488NETGRAPH_FEC opt_netgraph.h
489NETGRAPH_FRAME_RELAY opt_netgraph.h
490NETGRAPH_GIF opt_netgraph.h
491NETGRAPH_GIF_DEMUX opt_netgraph.h
492NETGRAPH_HOLE opt_netgraph.h
493NETGRAPH_IFACE opt_netgraph.h
494NETGRAPH_IP_INPUT opt_netgraph.h
495NETGRAPH_IPFW opt_netgraph.h
496NETGRAPH_KSOCKET opt_netgraph.h
497NETGRAPH_L2TP opt_netgraph.h
498NETGRAPH_LMI opt_netgraph.h
499# MPPC compression requires proprietary files (not included)
500NETGRAPH_MPPC_COMPRESSION opt_netgraph.h
501NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h
502NETGRAPH_NAT opt_netgraph.h
503NETGRAPH_NETFLOW opt_netgraph.h
504NETGRAPH_ONE2MANY opt_netgraph.h
505NETGRAPH_PATCH opt_netgraph.h
506NETGRAPH_PIPE opt_netgraph.h
507NETGRAPH_PPP opt_netgraph.h
508NETGRAPH_PPPOE opt_netgraph.h
509NETGRAPH_PPTPGRE opt_netgraph.h
510NETGRAPH_PRED1 opt_netgraph.h
511NETGRAPH_RFC1490 opt_netgraph.h
512NETGRAPH_SOCKET opt_netgraph.h
513NETGRAPH_SPLIT opt_netgraph.h
514NETGRAPH_SPPP opt_netgraph.h
515NETGRAPH_TAG opt_netgraph.h
516NETGRAPH_TCPMSS opt_netgraph.h
517NETGRAPH_TEE opt_netgraph.h
518NETGRAPH_TTY opt_netgraph.h
519NETGRAPH_UI opt_netgraph.h
520NETGRAPH_VJC opt_netgraph.h
521NETGRAPH_VLAN opt_netgraph.h
522
523# NgATM options
524NGATM_ATM opt_netgraph.h
525NGATM_ATMBASE opt_netgraph.h
526NGATM_SSCOP opt_netgraph.h
527NGATM_SSCFU opt_netgraph.h
528NGATM_UNI opt_netgraph.h
529NGATM_CCATM opt_netgraph.h
530
531# DRM options
532DRM_DEBUG opt_drm.h
533
534ZERO_COPY_SOCKETS opt_zero.h
535TI_SF_BUF_JUMBO opt_ti.h
536TI_JUMBO_HDRSPLIT opt_ti.h
537BCE_JUMBO_HDRSPLIT opt_bce.h
538
539# XXX Conflict: # of devices vs network protocol (Native ATM).
540# This makes "atm.h" unusable.
541NATM
542
543# DPT driver debug flags
544DPT_MEASURE_PERFORMANCE opt_dpt.h
545DPT_HANDLE_TIMEOUTS opt_dpt.h
546DPT_TIMEOUT_FACTOR opt_dpt.h
547DPT_LOST_IRQ opt_dpt.h
548DPT_RESET_HBA opt_dpt.h
549
550# Misc debug flags. Most of these should probably be replaced with
551# 'DEBUG', and then let people recompile just the interesting modules
552# with 'make CC="cc -DDEBUG"'.
553CLUSTERDEBUG opt_debug_cluster.h
554DEBUG_1284 opt_ppb_1284.h
555VP0_DEBUG opt_vpo.h
556LPT_DEBUG opt_lpt.h
557PLIP_DEBUG opt_plip.h
558LOCKF_DEBUG opt_debug_lockf.h
559NETATALKDEBUG opt_atalk.h
560SI_DEBUG opt_debug_si.h
561
562# Fb options
563FB_DEBUG opt_fb.h
564FB_INSTALL_CDEV opt_fb.h
565
566# ppbus related options
567PERIPH_1284 opt_ppb_1284.h
568DONTPROBE_1284 opt_ppb_1284.h
569
570# smbus related options
571ENABLE_ALART opt_intpm.h
572
573# These cause changes all over the kernel
574BLKDEV_IOSIZE opt_global.h
575BURN_BRIDGES opt_global.h
576DEBUG opt_global.h
577DEBUG_LOCKS opt_global.h
578DEBUG_VFS_LOCKS opt_global.h
579DFLTPHYS opt_global.h
580DIAGNOSTIC opt_global.h
581INVARIANT_SUPPORT opt_global.h
582INVARIANTS opt_global.h
583MAXCPU opt_global.h
584MAXPHYS opt_global.h
585MCLSHIFT opt_global.h
586MUTEX_DEBUG opt_global.h
587MUTEX_NOINLINE opt_global.h
588LOCK_PROFILING opt_global.h
589LOCK_PROFILING_FAST opt_global.h
590MSIZE opt_global.h
591REGRESSION opt_global.h
592RWLOCK_NOINLINE opt_global.h
593SX_NOINLINE opt_global.h
594VFS_BIO_DEBUG opt_global.h
595
596# These are VM related options
597VM_KMEM_SIZE opt_vm.h
598VM_KMEM_SIZE_SCALE opt_vm.h
599VM_KMEM_SIZE_MAX opt_vm.h
600VM_NRESERVLEVEL opt_vm.h
601VM_LEVEL_0_ORDER opt_vm.h
602NO_SWAPPING opt_vm.h
603MALLOC_MAKE_FAILURES opt_vm.h
604MALLOC_PROFILE opt_vm.h
605MALLOC_DEBUG_MAXZONES opt_vm.h
606
607# The MemGuard replacement allocator used for tamper-after-free detection
608DEBUG_MEMGUARD opt_vm.h
609
610# The RedZone malloc(9) protection
611DEBUG_REDZONE opt_vm.h
612
613# Standard SMP options
614SMP opt_global.h
615
616# Size of the kernel message buffer
617MSGBUF_SIZE opt_msgbuf.h
618
619# NFS options
620NFS_MINATTRTIMO opt_nfs.h
621NFS_MAXATTRTIMO opt_nfs.h
622NFS_MINDIRATTRTIMO opt_nfs.h
623NFS_MAXDIRATTRTIMO opt_nfs.h
624NFS_GATHERDELAY opt_nfs.h
625NFS_WDELAYHASHSIZ opt_nfs.h
626NFS_DEBUG opt_nfs.h
627
628# For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver
629OVERRIDE_CARD opt_bktr.h
630OVERRIDE_TUNER opt_bktr.h
631OVERRIDE_DBX opt_bktr.h
632OVERRIDE_MSP opt_bktr.h
633BROOKTREE_SYSTEM_DEFAULT opt_bktr.h
634BROOKTREE_ALLOC_PAGES opt_bktr.h
635BKTR_OVERRIDE_CARD opt_bktr.h
636BKTR_OVERRIDE_TUNER opt_bktr.h
637BKTR_OVERRIDE_DBX opt_bktr.h
638BKTR_OVERRIDE_MSP opt_bktr.h
639BKTR_SYSTEM_DEFAULT opt_bktr.h
640BKTR_ALLOC_PAGES opt_bktr.h
641BKTR_USE_PLL opt_bktr.h
642BKTR_GPIO_ACCESS opt_bktr.h
643BKTR_NO_MSP_RESET opt_bktr.h
644BKTR_430_FX_MODE opt_bktr.h
645BKTR_SIS_VIA_MODE opt_bktr.h
646BKTR_USE_FREEBSD_SMBUS opt_bktr.h
647BKTR_NEW_MSP34XX_DRIVER opt_bktr.h
648
649# Options to support PPS
650UART_PPS_ON_CTS opt_uart.h
651
652# options for bus/device framework
653BUS_DEBUG opt_bus.h
654
655# options for USB support
656USB_DEBUG opt_usb.h
657USB_HOST_ALIGN opt_usb.h
658USB_REQ_DEBUG opt_usb.h
659USB_VERBOSE opt_usb.h
660USB_EHCI_BIG_ENDIAN_DESC opt_usb.h
661U3G_DEBUG opt_u3g.h
662UKBD_DFLT_KEYMAP opt_ukbd.h
663UPLCOM_INTR_INTERVAL opt_uplcom.h
664UVSCOM_DEFAULT_OPKTSIZE opt_uvscom.h
665UVSCOM_INTR_INTERVAL opt_uvscom.h
666
667# Embedded system options
668INIT_PATH
669
670ROOTDEVNAME
671
672FDC_DEBUG opt_fdc.h
673PCFCLOCK_VERBOSE opt_pcfclock.h
674PCFCLOCK_MAX_RETRIES opt_pcfclock.h
675
676KTR opt_global.h
677KTR_ALQ opt_ktr.h
678KTR_MASK opt_ktr.h
679KTR_CPUMASK opt_ktr.h
680KTR_COMPILE opt_global.h
681KTR_ENTRIES opt_global.h
682KTR_VERBOSE opt_ktr.h
683WITNESS opt_global.h
684WITNESS_KDB opt_witness.h
685WITNESS_SKIPSPIN opt_witness.h
686
687# options for ACPI support
688ACPI_DEBUG opt_acpi.h
689ACPI_MAX_TASKS opt_acpi.h
690ACPI_MAX_THREADS opt_acpi.h
691
692# ISA support
693DEV_ISA opt_isa.h
694ISAPNP opt_isa.h
695
696# various 'device presence' options.
697DEV_BPF opt_bpf.h
698DEV_NETMAP opt_global.h
699DEV_MCA opt_mca.h
700DEV_CARP opt_carp.h
701DEV_SPLASH opt_splash.h
702
703# EISA support
704DEV_EISA opt_eisa.h
705EISA_SLOTS opt_eisa.h
706
707# ed driver
708ED_HPP opt_ed.h
709ED_3C503 opt_ed.h
710ED_SIC opt_ed.h
711
712# bce driver
713BCE_DEBUG opt_bce.h
714BCE_NVRAM_WRITE_SUPPORT opt_bce.h
715
716# bxe driver
717BXE_DEBUG opt_bxe.h
718BXE_NVRAM_WRITE_SUPPORT opt_bxe.h
719
720SOCKBUF_DEBUG opt_global.h
721
722
723# options for ubsec driver
724UBSEC_DEBUG opt_ubsec.h
725UBSEC_RNDTEST opt_ubsec.h
726UBSEC_NO_RNG opt_ubsec.h
727
728# options for hifn driver
729HIFN_DEBUG opt_hifn.h
730HIFN_RNDTEST opt_hifn.h
731
732# options for safenet driver
733SAFE_DEBUG opt_safe.h
734SAFE_NO_RNG opt_safe.h
735SAFE_RNDTEST opt_safe.h
736
737# syscons options
738MAXCONS opt_syscons.h
739SC_ALT_MOUSE_IMAGE opt_syscons.h
740SC_CUT_SPACES2TABS opt_syscons.h
741SC_CUT_SEPCHARS opt_syscons.h
742SC_DEBUG_LEVEL opt_syscons.h
743SC_DFLT_FONT opt_syscons.h
744SC_DISABLE_KDBKEY opt_syscons.h
745SC_DISABLE_REBOOT opt_syscons.h
746SC_HISTORY_SIZE opt_syscons.h
747SC_KERNEL_CONS_ATTR opt_syscons.h
748SC_KERNEL_CONS_REV_ATTR opt_syscons.h
749SC_MOUSE_CHAR opt_syscons.h
750SC_NO_CUTPASTE opt_syscons.h
751SC_NO_FONT_LOADING opt_syscons.h
752SC_NO_HISTORY opt_syscons.h
753SC_NO_MODE_CHANGE opt_syscons.h
754SC_NO_SUSPEND_VTYSWITCH opt_syscons.h
755SC_NO_SYSMOUSE opt_syscons.h
756SC_NORM_ATTR opt_syscons.h
757SC_NORM_REV_ATTR opt_syscons.h
758SC_PIXEL_MODE opt_syscons.h
759SC_RENDER_DEBUG opt_syscons.h
760SC_TWOBUTTON_MOUSE opt_syscons.h
761
762# teken terminal emulator options
763TEKEN_CONS25 opt_teken.h
764TEKEN_UTF8 opt_teken.h
765
766# options for printf
767PRINTF_BUFR_SIZE opt_printf.h
768
769# kbd options
770KBD_DISABLE_KEYMAP_LOAD opt_kbd.h
771KBD_INSTALL_CDEV opt_kbd.h
772KBD_MAXRETRY opt_kbd.h
773KBD_MAXWAIT opt_kbd.h
774KBD_RESETDELAY opt_kbd.h
775KBDIO_DEBUG opt_kbd.h
776
777# options for the Atheros driver
778ATH_DEBUG opt_ath.h
779ATH_TXBUF opt_ath.h
780ATH_RXBUF opt_ath.h
781ATH_DIAGAPI opt_ath.h
782ATH_TX99_DIAG opt_ath.h
783ATH_ENABLE_11N opt_ath.h
784ATH_ENABLE_DFS opt_ath.h
785ATH_EEPROM_FIRMWARE opt_ath.h
786ATH_ENABLE_RADIOTAP_VENDOR_EXT opt_ath.h
787
788# options for the Atheros hal
789AH_SUPPORT_AR5416 opt_ah.h
790# XXX For now, this breaks non-AR9130 chipsets, so only use it
791# XXX when actually targetting AR9130.
792AH_SUPPORT_AR9130 opt_ah.h
793
794AH_DEBUG opt_ah.h
795AH_ASSERT opt_ah.h
796AH_DEBUG_ALQ opt_ah.h
797AH_REGOPS_FUNC opt_ah.h
798AH_WRITE_REGDOMAIN opt_ah.h
799AH_DEBUG_COUNTRY opt_ah.h
800AH_WRITE_EEPROM opt_ah.h
801AH_PRIVATE_DIAG opt_ah.h
802AH_NEED_DESC_SWAP opt_ah.h
803AH_USE_INIPDGAIN opt_ah.h
804AH_MAXCHAN opt_ah.h
805AH_RXCFG_SDMAMW_4BYTES opt_ah.h
806
807# AR5416 and later interrupt mitigation
808# XXX do not use this for AR9130
809AH_AR5416_INTERRUPT_MITIGATION opt_ah.h
810
811# options for the Broadcom BCM43xx driver (bwi)
812BWI_DEBUG opt_bwi.h
813BWI_DEBUG_VERBOSE opt_bwi.h
814
815# options for the Marvell 8335 wireless driver
816MALO_DEBUG opt_malo.h
817MALO_TXBUF opt_malo.h
818MALO_RXBUF opt_malo.h
819
820# options for the Marvell wireless driver
821MWL_DEBUG opt_mwl.h
822MWL_TXBUF opt_mwl.h
823MWL_RXBUF opt_mwl.h
824MWL_DIAGAPI opt_mwl.h
825MWL_AGGR_SIZE opt_mwl.h
826MWL_TX_NODROP opt_mwl.h
827
828# dcons options
829DCONS_BUF_SIZE opt_dcons.h
830DCONS_POLL_HZ opt_dcons.h
831DCONS_FORCE_CONSOLE opt_dcons.h
832DCONS_FORCE_GDB opt_dcons.h
833
834# HWPMC options
835HWPMC_HOOKS
836HWPMC_MIPS_BACKTRACE opt_hwpmc_hooks.h
837
838# XBOX options for FreeBSD/i386, but some files are MI
839XBOX opt_xbox.h
840
841# XFS
842XFS
843
844ZFS opt_dontuse.h
845
846# Interrupt filtering
847INTR_FILTER
848
849# 802.11 support layer
850IEEE80211_DEBUG opt_wlan.h
851IEEE80211_DEBUG_REFCNT opt_wlan.h
852IEEE80211_AMPDU_AGE opt_wlan.h
853IEEE80211_SUPPORT_MESH opt_wlan.h
854IEEE80211_SUPPORT_SUPERG opt_wlan.h
855IEEE80211_SUPPORT_TDMA opt_wlan.h
856IEEE80211_ALQ opt_wlan.h
857IEEE80211_DFS_DEBUG opt_wlan.h
858
859# 802.11 TDMA support
860TDMA_SLOTLEN_DEFAULT opt_tdma.h
861TDMA_SLOTCNT_DEFAULT opt_tdma.h
862TDMA_BINTVAL_DEFAULT opt_tdma.h
863TDMA_TXRATE_11B_DEFAULT opt_tdma.h
864TDMA_TXRATE_11G_DEFAULT opt_tdma.h
865TDMA_TXRATE_11A_DEFAULT opt_tdma.h
866TDMA_TXRATE_TURBO_DEFAULT opt_tdma.h
867TDMA_TXRATE_HALF_DEFAULT opt_tdma.h
868TDMA_TXRATE_QUARTER_DEFAULT opt_tdma.h
869TDMA_TXRATE_11NA_DEFAULT opt_tdma.h
870TDMA_TXRATE_11NG_DEFAULT opt_tdma.h
871
872# Network stack virtualization options
873VIMAGE opt_global.h
874VNET_DEBUG opt_global.h
875
876# Common Flash Interface (CFI) options
877CFI_SUPPORT_STRATAFLASH opt_cfi.h
878CFI_ARMEDANDDANGEROUS opt_cfi.h
879
880# Sound options
881SND_DEBUG opt_snd.h
882SND_DIAGNOSTIC opt_snd.h
883SND_FEEDER_MULTIFORMAT opt_snd.h
884SND_FEEDER_FULL_MULTIFORMAT opt_snd.h
885SND_FEEDER_RATE_HP opt_snd.h
886SND_PCM_64 opt_snd.h
887SND_OLDSTEREO opt_snd.h
888
889X86BIOS
890
891# Flattened device tree options
892FDT opt_platform.h
893FDT_DTB_STATIC opt_platform.h
894
895# OFED Infiniband stack
896OFED opt_ofed.h
897OFED_DEBUG_INIT opt_ofed.h
898SDP opt_ofed.h
899SDP_DEBUG opt_ofed.h
900IPOIB opt_ofed.h
901IPOIB_DEBUG opt_ofed.h
902IPOIB_CM opt_ofed.h
903
904# Resource Accounting
905RACCT opt_global.h
906
907# Resource Limits
908RCTL opt_global.h
909
910# At least one of the AR71XX ubiquiti boards has a Redboot configuration
911# that "lies" about the amount of RAM it has. Until a cleaner method is
912# defined, this option will suffice in overriding what Redboot says.
913AR71XX_REALMEM opt_ar71xx.h
914AR71XX_ENV_UBOOT opt_ar71xx.h
915AR71XX_ENV_REDBOOT opt_ar71xx.h
916AR71XX_ATH_EEPROM opt_ar71xx.h
2#
3# On the handling of kernel options
4#
5# All kernel options should be listed in NOTES, with suitable
6# descriptions. Negative options (options that make some code not
7# compile) should be commented out; LINT (generated from NOTES) should
8# compile as much code as possible. Try to structure option-using
9# code so that a single option only switch code on, or only switch
10# code off, to make it possible to have a full compile-test. If
11# necessary, you can check for COMPILING_LINT to get maximum code
12# coverage.
13#
14# All new options shall also be listed in either "conf/options" or
15# "conf/options.<machine>". Options that affect a single source-file
16# <xxx>.[c|s] should be directed into "opt_<xxx>.h", while options
17# that affect multiple files should either go in "opt_global.h" if
18# this is a kernel-wide option (used just about everywhere), or in
19# "opt_<option-name-in-lower-case>.h" if it affects only some files.
20# Note that the effect of listing only an option without a
21# header-file-name in conf/options (and cousins) is that the last
22# convention is followed.
23#
24# This handling scheme is not yet fully implemented.
25#
26#
27# Format of this file:
28# Option name filename
29#
30# If filename is missing, the default is
31# opt_<name-of-option-in-lower-case>.h
32
33AAC_DEBUG opt_aac.h
34AHC_ALLOW_MEMIO opt_aic7xxx.h
35AHC_TMODE_ENABLE opt_aic7xxx.h
36AHC_DUMP_EEPROM opt_aic7xxx.h
37AHC_DEBUG opt_aic7xxx.h
38AHC_DEBUG_OPTS opt_aic7xxx.h
39AHC_REG_PRETTY_PRINT opt_aic7xxx.h
40AHD_DEBUG opt_aic79xx.h
41AHD_DEBUG_OPTS opt_aic79xx.h
42AHD_TMODE_ENABLE opt_aic79xx.h
43AHD_REG_PRETTY_PRINT opt_aic79xx.h
44ADW_ALLOW_MEMIO opt_adw.h
45
46TWA_DEBUG opt_twa.h
47TWA_FLASH_FIRMWARE opt_twa.h
48
49# Debugging options.
50ALT_BREAK_TO_DEBUGGER opt_kdb.h
51BREAK_TO_DEBUGGER opt_kdb.h
52DDB
53DDB_BUFR_SIZE opt_ddb.h
54DDB_CAPTURE_DEFAULTBUFSIZE opt_ddb.h
55DDB_CAPTURE_MAXBUFSIZE opt_ddb.h
56DDB_CTF opt_ddb.h
57DDB_NUMSYM opt_ddb.h
58GDB
59KDB opt_global.h
60KDB_TRACE opt_kdb.h
61KDB_UNATTENDED opt_kdb.h
62KLD_DEBUG opt_kld.h
63SYSCTL_DEBUG opt_sysctl.h
64
65# Miscellaneous options.
66ADAPTIVE_LOCKMGRS
67ALQ
68AUDIT opt_global.h
69CAPABILITIES opt_capsicum.h
70CAPABILITY_MODE opt_capsicum.h
71CODA_COMPAT_5 opt_coda.h
72COMPAT_43 opt_compat.h
73COMPAT_43TTY opt_compat.h
74COMPAT_FREEBSD4 opt_compat.h
75COMPAT_FREEBSD5 opt_compat.h
76COMPAT_FREEBSD6 opt_compat.h
77COMPAT_FREEBSD7 opt_compat.h
78COMPILING_LINT opt_global.h
79COMPRESS_USER_CORES opt_core.h
80CY_PCI_FASTINTR
81DEADLKRES opt_watchdog.h
82DIRECTIO
83FFCLOCK
84FULL_PREEMPTION opt_sched.h
85IPI_PREEMPTION opt_sched.h
86GEOM_AES opt_geom.h
87GEOM_BDE opt_geom.h
88GEOM_BSD opt_geom.h
89GEOM_CACHE opt_geom.h
90GEOM_CONCAT opt_geom.h
91GEOM_ELI opt_geom.h
92GEOM_FOX opt_geom.h
93GEOM_GATE opt_geom.h
94GEOM_JOURNAL opt_geom.h
95GEOM_LABEL opt_geom.h
96GEOM_LINUX_LVM opt_geom.h
97GEOM_MBR opt_geom.h
98GEOM_MIRROR opt_geom.h
99GEOM_MULTIPATH opt_geom.h
100GEOM_NOP opt_geom.h
101GEOM_PART_APM opt_geom.h
102GEOM_PART_BSD opt_geom.h
103GEOM_PART_EBR opt_geom.h
104GEOM_PART_EBR_COMPAT opt_geom.h
105GEOM_PART_GPT opt_geom.h
106GEOM_PART_LDM opt_geom.h
107GEOM_PART_MBR opt_geom.h
108GEOM_PART_PC98 opt_geom.h
109GEOM_PART_VTOC8 opt_geom.h
110GEOM_PC98 opt_geom.h
111GEOM_RAID opt_geom.h
112GEOM_RAID3 opt_geom.h
113GEOM_SHSEC opt_geom.h
114GEOM_STRIPE opt_geom.h
115GEOM_SUNLABEL opt_geom.h
116GEOM_UNCOMPRESS opt_geom.h
117GEOM_UZIP opt_geom.h
118GEOM_VIRSTOR opt_geom.h
119GEOM_VOL opt_geom.h
120GEOM_ZERO opt_geom.h
121KDTRACE_HOOKS opt_kdtrace.h
122KSTACK_MAX_PAGES
123KSTACK_PAGES
124KTRACE
125KTRACE_REQUEST_POOL opt_ktrace.h
126LIBICONV
127MAC opt_global.h
128MAC_BIBA opt_dontuse.h
129MAC_BSDEXTENDED opt_dontuse.h
130MAC_IFOFF opt_dontuse.h
131MAC_LOMAC opt_dontuse.h
132MAC_MLS opt_dontuse.h
133MAC_NONE opt_dontuse.h
134MAC_PARTITION opt_dontuse.h
135MAC_PORTACL opt_dontuse.h
136MAC_SEEOTHERUIDS opt_dontuse.h
137MAC_STATIC opt_mac.h
138MAC_STUB opt_dontuse.h
139MAC_TEST opt_dontuse.h
140MD_ROOT opt_md.h
141MD_ROOT_SIZE opt_md.h
142MFI_DEBUG opt_mfi.h
143MFI_DECODE_LOG opt_mfi.h
144MPROF_BUFFERS opt_mprof.h
145MPROF_HASH_SIZE opt_mprof.h
146NEW_PCIB opt_global.h
147NO_ADAPTIVE_MUTEXES opt_adaptive_mutexes.h
148NO_ADAPTIVE_RWLOCKS
149NO_ADAPTIVE_SX
150NO_SYSCTL_DESCR opt_global.h
151NSWBUF_MIN opt_swap.h
152MBUF_PACKET_ZONE_DISABLE opt_global.h
153PANIC_REBOOT_WAIT_TIME opt_panic.h
154PPC_DEBUG opt_ppc.h
155PPC_PROBE_CHIPSET opt_ppc.h
156PPS_SYNC opt_ntp.h
157PREEMPTION opt_sched.h
158PROCDESC opt_procdesc.h
159QUOTA
160SCHED_4BSD opt_sched.h
161SCHED_STATS opt_sched.h
162SCHED_ULE opt_sched.h
163SLEEPQUEUE_PROFILING
164SLHCI_DEBUG opt_slhci.h
165SPX_HACK
166STACK opt_stack.h
167SUIDDIR
168MSGMNB opt_sysvipc.h
169MSGMNI opt_sysvipc.h
170MSGSEG opt_sysvipc.h
171MSGSSZ opt_sysvipc.h
172MSGTQL opt_sysvipc.h
173SEMMNI opt_sysvipc.h
174SEMMNS opt_sysvipc.h
175SEMMNU opt_sysvipc.h
176SEMMSL opt_sysvipc.h
177SEMOPM opt_sysvipc.h
178SEMUME opt_sysvipc.h
179SHMALL opt_sysvipc.h
180SHMMAX opt_sysvipc.h
181SHMMAXPGS opt_sysvipc.h
182SHMMIN opt_sysvipc.h
183SHMMNI opt_sysvipc.h
184SHMSEG opt_sysvipc.h
185SYSVMSG opt_sysvipc.h
186SYSVSEM opt_sysvipc.h
187SYSVSHM opt_sysvipc.h
188SW_WATCHDOG opt_watchdog.h
189TURNSTILE_PROFILING
190UMTX_PROFILING
191VFS_AIO
192VFS_ALLOW_NONMPSAFE
193VERBOSE_SYSINIT opt_global.h
194WLCACHE opt_wavelan.h
195WLDEBUG opt_wavelan.h
196
197# POSIX kernel options
198P1003_1B_MQUEUE opt_posix.h
199P1003_1B_SEMAPHORES opt_posix.h
200_KPOSIX_PRIORITY_SCHEDULING opt_posix.h
201
202# Do we want the config file compiled into the kernel?
203INCLUDE_CONFIG_FILE opt_config.h
204
205# Options for static filesystems. These should only be used at config
206# time, since the corresponding lkms cannot work if there are any static
207# dependencies. Unusability is enforced by hiding the defines for the
208# options in a never-included header.
209CD9660 opt_dontuse.h
210CODA opt_dontuse.h
211EXT2FS opt_dontuse.h
212FDESCFS opt_dontuse.h
213FFS opt_dontuse.h
214HPFS opt_dontuse.h
215MSDOSFS opt_dontuse.h
216NANDFS opt_dontuse.h
217NTFS opt_dontuse.h
218NULLFS opt_dontuse.h
219NWFS opt_dontuse.h
220PORTALFS opt_dontuse.h
221PROCFS opt_dontuse.h
222PSEUDOFS opt_dontuse.h
223REISERFS opt_dontuse.h
224SMBFS opt_dontuse.h
225TMPFS opt_dontuse.h
226UDF opt_dontuse.h
227UNIONFS opt_dontuse.h
228
229# Pseudofs debugging
230PSEUDOFS_TRACE opt_pseudofs.h
231
232# In-kernel GSS-API
233KGSSAPI opt_kgssapi.h
234KGSSAPI_DEBUG opt_kgssapi.h
235
236# These static filesystems have one slightly bogus static dependency in
237# sys/i386/i386/autoconf.c. If any of these filesystems are
238# statically compiled into the kernel, code for mounting them as root
239# filesystems will be enabled - but look below.
240NFSCLIENT opt_nfs.h
241NFSSERVER opt_nfs.h
242
243# Use these options to compile the experimental nfs client and/or
244# server that supports NFSv4 into a kernel.
245# NFSCL - client
246# NFSD - server
247NFSCL opt_nfs.h
248NFSD opt_nfs.h
249
250# filesystems and libiconv bridge
251CD9660_ICONV opt_dontuse.h
252MSDOSFS_ICONV opt_dontuse.h
253NTFS_ICONV opt_dontuse.h
254UDF_ICONV opt_dontuse.h
255
256# If you are following the conditions in the copyright,
257# you can enable soft-updates which will speed up a lot of thigs
258# and make the system safer from crashes at the same time.
259# otherwise a STUB module will be compiled in.
260SOFTUPDATES opt_ffs.h
261
262# On small, embedded systems, it can be useful to turn off support for
263# snapshots. It saves about 30-40k for a feature that would be lightly
264# used, if it is used at all.
265NO_FFS_SNAPSHOT opt_ffs.h
266
267# Enabling this option turns on support for Access Control Lists in UFS,
268# which can be used to support high security configurations. Depends on
269# UFS_EXTATTR.
270UFS_ACL opt_ufs.h
271
272# Enabling this option turns on support for extended attributes in UFS-based
273# filesystems, which can be used to support high security configurations
274# as well as new filesystem features.
275UFS_EXTATTR opt_ufs.h
276UFS_EXTATTR_AUTOSTART opt_ufs.h
277
278# Enable fast hash lookups for large directories on UFS-based filesystems.
279UFS_DIRHASH opt_ufs.h
280
281# Enable gjournal-based UFS journal.
282UFS_GJOURNAL opt_ufs.h
283
284# The below sentence is not in English, and neither is this one.
285# We plan to remove the static dependences above, with a
286# <filesystem>_ROOT option to control if it usable as root. This list
287# allows these options to be present in config files already (though
288# they won't make any difference yet).
289NFS_ROOT opt_nfsroot.h
290
291# SMB/CIFS requester
292NETSMB opt_netsmb.h
293
294# Options used only in subr_param.c.
295HZ opt_param.h
296MAXFILES opt_param.h
297NBUF opt_param.h
298NSFBUFS opt_param.h
299VM_BCACHE_SIZE_MAX opt_param.h
300VM_SWZONE_SIZE_MAX opt_param.h
301MAXUSERS
302DFLDSIZ opt_param.h
303MAXDSIZ opt_param.h
304MAXSSIZ opt_param.h
305
306# Generic SCSI options.
307CAM_MAX_HIGHPOWER opt_cam.h
308CAMDEBUG opt_cam.h
309CAM_DEBUG_COMPILE opt_cam.h
310CAM_DEBUG_DELAY opt_cam.h
311CAM_DEBUG_BUS opt_cam.h
312CAM_DEBUG_TARGET opt_cam.h
313CAM_DEBUG_LUN opt_cam.h
314CAM_DEBUG_FLAGS opt_cam.h
315SCSI_DELAY opt_scsi.h
316SCSI_NO_SENSE_STRINGS opt_scsi.h
317SCSI_NO_OP_STRINGS opt_scsi.h
318
319# Options used only in cam/ata/ata_da.c
320ADA_TEST_FAILURE opt_ada.h
321
322# Options used only in cam/scsi/scsi_cd.c
323CHANGER_MIN_BUSY_SECONDS opt_cd.h
324CHANGER_MAX_BUSY_SECONDS opt_cd.h
325
326# Options used only in cam/scsi/scsi_sa.c.
327SA_IO_TIMEOUT opt_sa.h
328SA_SPACE_TIMEOUT opt_sa.h
329SA_REWIND_TIMEOUT opt_sa.h
330SA_ERASE_TIMEOUT opt_sa.h
331SA_1FM_AT_EOD opt_sa.h
332
333# Options used only in cam/scsi/scsi_pt.c
334SCSI_PT_DEFAULT_TIMEOUT opt_pt.h
335
336# Options used only in cam/scsi/scsi_ses.c
337SES_ENABLE_PASSTHROUGH opt_ses.h
338
339# Options used in dev/sym/ (Symbios SCSI driver).
340SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits)
341 # Allows the ncr to take precedence
342 # 1 (1<<0) -> 810a, 860
343 # 2 (1<<1) -> 825a, 875, 885, 895
344 # 4 (1<<2) -> 895a, 896, 1510d
345SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885
346 # disabled:0 (default), enabled:1
347SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking
348 # disabled:0, enabled:1 (default)
349SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported
350 # default:8, range:[1..64]
351
352# Options used only in pci/ncr.c
353SCSI_NCR_DEBUG opt_ncr.h
354SCSI_NCR_MAX_SYNC opt_ncr.h
355SCSI_NCR_MAX_WIDE opt_ncr.h
356SCSI_NCR_MYADDR opt_ncr.h
357
358# Options used only in dev/isp/*
359ISP_TARGET_MODE opt_isp.h
360ISP_FW_CRASH_DUMP opt_isp.h
361ISP_DEFAULT_ROLES opt_isp.h
362ISP_INTERNAL_TARGET opt_isp.h
363
364# Options used only in dev/iscsi
365ISCSI_INITIATOR_DEBUG opt_iscsi_initiator.h
366
367# Options used in the 'ata' ATA/ATAPI driver
368ATA_STATIC_ID opt_ata.h
369ATA_NOPCI opt_ata.h
370ATA_REQUEST_TIMEOUT opt_ata.h
371ATA_CAM opt_ata.h
372
373# Net stuff.
374ACCEPT_FILTER_DATA
375ACCEPT_FILTER_DNS
376ACCEPT_FILTER_HTTP
377ALTQ opt_global.h
378ALTQ_CBQ opt_altq.h
379ALTQ_CDNR opt_altq.h
380ALTQ_DEBUG opt_altq.h
381ALTQ_HFSC opt_altq.h
382ALTQ_NOPCC opt_altq.h
383ALTQ_PRIQ opt_altq.h
384ALTQ_RED opt_altq.h
385ALTQ_RIO opt_altq.h
386BOOTP opt_bootp.h
387BOOTP_BLOCKSIZE opt_bootp.h
388BOOTP_COMPAT opt_bootp.h
389BOOTP_NFSROOT opt_bootp.h
390BOOTP_NFSV3 opt_bootp.h
391BOOTP_WIRED_TO opt_bootp.h
392DEVICE_POLLING
393DEV_ENC opt_enc.h
394DEV_PF opt_pf.h
395DEV_PFLOG opt_pf.h
396DEV_PFSYNC opt_pf.h
397DEV_VLAN opt_vlan.h
398DUMMYNET opt_ipdn.h
399ETHER_8022 opt_ef.h
400ETHER_8023 opt_ef.h
401ETHER_II opt_ef.h
402ETHER_SNAP opt_ef.h
403INET opt_inet.h
404INET6 opt_inet6.h
405IPDIVERT
406IPFILTER opt_ipfilter.h
407IPFILTER_DEFAULT_BLOCK opt_ipfilter.h
408IPFILTER_LOG opt_ipfilter.h
409IPFILTER_LOOKUP opt_ipfilter.h
410IPFIREWALL opt_ipfw.h
411IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h
412IPFIREWALL_FORWARD opt_ipfw.h
413IPFIREWALL_NAT opt_ipfw.h
414IPFIREWALL_VERBOSE opt_ipfw.h
415IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h
416IPSEC opt_ipsec.h
417IPSEC_DEBUG opt_ipsec.h
418IPSEC_FILTERTUNNEL opt_ipsec.h
419IPSEC_NAT_T opt_ipsec.h
420IPSTEALTH
421IPX
422KRPC
423LIBALIAS
424LIBMBPOOL
425LIBMCHAIN
426MBUF_PROFILING
427MBUF_STRESS_TEST
428MROUTING opt_mrouting.h
429NCP
430NETATALK opt_atalk.h
431NFSLOCKD
432PCBGROUP opt_pcbgroup.h
433RADIX_MPATH opt_mpath.h
434ROUTETABLES opt_route.h
435SLIP_IFF_OPTS opt_slip.h
436TCPDEBUG
437TCP_OFFLOAD opt_inet.h # Enable code to dispatch TCP offloading
438TCP_SIGNATURE opt_inet.h
439VLAN_ARRAY opt_vlan.h
440XBONEHACK
441FLOWTABLE opt_route.h
442
443#
444# SCTP
445#
446SCTP opt_sctp.h
447SCTP_DEBUG opt_sctp.h # Enable debug printfs
448SCTP_WITH_NO_CSUM opt_sctp.h # Use this at your peril
449SCTP_LOCK_LOGGING opt_sctp.h # Log to KTR lock activity
450SCTP_MBUF_LOGGING opt_sctp.h # Log to KTR general mbuf aloc/free
451SCTP_MBCNT_LOGGING opt_sctp.h # Log to KTR mbcnt activity
452SCTP_PACKET_LOGGING opt_sctp.h # Log to a packet buffer last N packets
453SCTP_LTRACE_CHUNKS opt_sctp.h # Log to KTR chunks processed
454SCTP_LTRACE_ERRORS opt_sctp.h # Log to KTR error returns.
455SCTP_USE_PERCPU_STAT opt_sctp.h # Use per cpu stats.
456SCTP_MCORE_INPUT opt_sctp.h # Have multiple input threads for input mbufs
457#
458#
459#
460
461# Netgraph(4). Use option NETGRAPH to enable the base netgraph code.
462# Each netgraph node type can be either be compiled into the kernel
463# or loaded dynamically. To get the former, include the corresponding
464# option below. Each type has its own man page, e.g. ng_async(4).
465NETGRAPH
466NETGRAPH_DEBUG opt_netgraph.h
467NETGRAPH_ASYNC opt_netgraph.h
468NETGRAPH_ATMLLC opt_netgraph.h
469NETGRAPH_ATM_ATMPIF opt_netgraph.h
470NETGRAPH_BLUETOOTH opt_netgraph.h
471NETGRAPH_BLUETOOTH_BT3C opt_netgraph.h
472NETGRAPH_BLUETOOTH_H4 opt_netgraph.h
473NETGRAPH_BLUETOOTH_HCI opt_netgraph.h
474NETGRAPH_BLUETOOTH_L2CAP opt_netgraph.h
475NETGRAPH_BLUETOOTH_SOCKET opt_netgraph.h
476NETGRAPH_BLUETOOTH_UBT opt_netgraph.h
477NETGRAPH_BLUETOOTH_UBTBCMFW opt_netgraph.h
478NETGRAPH_BPF opt_netgraph.h
479NETGRAPH_BRIDGE opt_netgraph.h
480NETGRAPH_CAR opt_netgraph.h
481NETGRAPH_CISCO opt_netgraph.h
482NETGRAPH_DEFLATE opt_netgraph.h
483NETGRAPH_DEVICE opt_netgraph.h
484NETGRAPH_ECHO opt_netgraph.h
485NETGRAPH_EIFACE opt_netgraph.h
486NETGRAPH_ETHER opt_netgraph.h
487NETGRAPH_ETHER_ECHO opt_netgraph.h
488NETGRAPH_FEC opt_netgraph.h
489NETGRAPH_FRAME_RELAY opt_netgraph.h
490NETGRAPH_GIF opt_netgraph.h
491NETGRAPH_GIF_DEMUX opt_netgraph.h
492NETGRAPH_HOLE opt_netgraph.h
493NETGRAPH_IFACE opt_netgraph.h
494NETGRAPH_IP_INPUT opt_netgraph.h
495NETGRAPH_IPFW opt_netgraph.h
496NETGRAPH_KSOCKET opt_netgraph.h
497NETGRAPH_L2TP opt_netgraph.h
498NETGRAPH_LMI opt_netgraph.h
499# MPPC compression requires proprietary files (not included)
500NETGRAPH_MPPC_COMPRESSION opt_netgraph.h
501NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h
502NETGRAPH_NAT opt_netgraph.h
503NETGRAPH_NETFLOW opt_netgraph.h
504NETGRAPH_ONE2MANY opt_netgraph.h
505NETGRAPH_PATCH opt_netgraph.h
506NETGRAPH_PIPE opt_netgraph.h
507NETGRAPH_PPP opt_netgraph.h
508NETGRAPH_PPPOE opt_netgraph.h
509NETGRAPH_PPTPGRE opt_netgraph.h
510NETGRAPH_PRED1 opt_netgraph.h
511NETGRAPH_RFC1490 opt_netgraph.h
512NETGRAPH_SOCKET opt_netgraph.h
513NETGRAPH_SPLIT opt_netgraph.h
514NETGRAPH_SPPP opt_netgraph.h
515NETGRAPH_TAG opt_netgraph.h
516NETGRAPH_TCPMSS opt_netgraph.h
517NETGRAPH_TEE opt_netgraph.h
518NETGRAPH_TTY opt_netgraph.h
519NETGRAPH_UI opt_netgraph.h
520NETGRAPH_VJC opt_netgraph.h
521NETGRAPH_VLAN opt_netgraph.h
522
523# NgATM options
524NGATM_ATM opt_netgraph.h
525NGATM_ATMBASE opt_netgraph.h
526NGATM_SSCOP opt_netgraph.h
527NGATM_SSCFU opt_netgraph.h
528NGATM_UNI opt_netgraph.h
529NGATM_CCATM opt_netgraph.h
530
531# DRM options
532DRM_DEBUG opt_drm.h
533
534ZERO_COPY_SOCKETS opt_zero.h
535TI_SF_BUF_JUMBO opt_ti.h
536TI_JUMBO_HDRSPLIT opt_ti.h
537BCE_JUMBO_HDRSPLIT opt_bce.h
538
539# XXX Conflict: # of devices vs network protocol (Native ATM).
540# This makes "atm.h" unusable.
541NATM
542
543# DPT driver debug flags
544DPT_MEASURE_PERFORMANCE opt_dpt.h
545DPT_HANDLE_TIMEOUTS opt_dpt.h
546DPT_TIMEOUT_FACTOR opt_dpt.h
547DPT_LOST_IRQ opt_dpt.h
548DPT_RESET_HBA opt_dpt.h
549
550# Misc debug flags. Most of these should probably be replaced with
551# 'DEBUG', and then let people recompile just the interesting modules
552# with 'make CC="cc -DDEBUG"'.
553CLUSTERDEBUG opt_debug_cluster.h
554DEBUG_1284 opt_ppb_1284.h
555VP0_DEBUG opt_vpo.h
556LPT_DEBUG opt_lpt.h
557PLIP_DEBUG opt_plip.h
558LOCKF_DEBUG opt_debug_lockf.h
559NETATALKDEBUG opt_atalk.h
560SI_DEBUG opt_debug_si.h
561
562# Fb options
563FB_DEBUG opt_fb.h
564FB_INSTALL_CDEV opt_fb.h
565
566# ppbus related options
567PERIPH_1284 opt_ppb_1284.h
568DONTPROBE_1284 opt_ppb_1284.h
569
570# smbus related options
571ENABLE_ALART opt_intpm.h
572
573# These cause changes all over the kernel
574BLKDEV_IOSIZE opt_global.h
575BURN_BRIDGES opt_global.h
576DEBUG opt_global.h
577DEBUG_LOCKS opt_global.h
578DEBUG_VFS_LOCKS opt_global.h
579DFLTPHYS opt_global.h
580DIAGNOSTIC opt_global.h
581INVARIANT_SUPPORT opt_global.h
582INVARIANTS opt_global.h
583MAXCPU opt_global.h
584MAXPHYS opt_global.h
585MCLSHIFT opt_global.h
586MUTEX_DEBUG opt_global.h
587MUTEX_NOINLINE opt_global.h
588LOCK_PROFILING opt_global.h
589LOCK_PROFILING_FAST opt_global.h
590MSIZE opt_global.h
591REGRESSION opt_global.h
592RWLOCK_NOINLINE opt_global.h
593SX_NOINLINE opt_global.h
594VFS_BIO_DEBUG opt_global.h
595
596# These are VM related options
597VM_KMEM_SIZE opt_vm.h
598VM_KMEM_SIZE_SCALE opt_vm.h
599VM_KMEM_SIZE_MAX opt_vm.h
600VM_NRESERVLEVEL opt_vm.h
601VM_LEVEL_0_ORDER opt_vm.h
602NO_SWAPPING opt_vm.h
603MALLOC_MAKE_FAILURES opt_vm.h
604MALLOC_PROFILE opt_vm.h
605MALLOC_DEBUG_MAXZONES opt_vm.h
606
607# The MemGuard replacement allocator used for tamper-after-free detection
608DEBUG_MEMGUARD opt_vm.h
609
610# The RedZone malloc(9) protection
611DEBUG_REDZONE opt_vm.h
612
613# Standard SMP options
614SMP opt_global.h
615
616# Size of the kernel message buffer
617MSGBUF_SIZE opt_msgbuf.h
618
619# NFS options
620NFS_MINATTRTIMO opt_nfs.h
621NFS_MAXATTRTIMO opt_nfs.h
622NFS_MINDIRATTRTIMO opt_nfs.h
623NFS_MAXDIRATTRTIMO opt_nfs.h
624NFS_GATHERDELAY opt_nfs.h
625NFS_WDELAYHASHSIZ opt_nfs.h
626NFS_DEBUG opt_nfs.h
627
628# For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver
629OVERRIDE_CARD opt_bktr.h
630OVERRIDE_TUNER opt_bktr.h
631OVERRIDE_DBX opt_bktr.h
632OVERRIDE_MSP opt_bktr.h
633BROOKTREE_SYSTEM_DEFAULT opt_bktr.h
634BROOKTREE_ALLOC_PAGES opt_bktr.h
635BKTR_OVERRIDE_CARD opt_bktr.h
636BKTR_OVERRIDE_TUNER opt_bktr.h
637BKTR_OVERRIDE_DBX opt_bktr.h
638BKTR_OVERRIDE_MSP opt_bktr.h
639BKTR_SYSTEM_DEFAULT opt_bktr.h
640BKTR_ALLOC_PAGES opt_bktr.h
641BKTR_USE_PLL opt_bktr.h
642BKTR_GPIO_ACCESS opt_bktr.h
643BKTR_NO_MSP_RESET opt_bktr.h
644BKTR_430_FX_MODE opt_bktr.h
645BKTR_SIS_VIA_MODE opt_bktr.h
646BKTR_USE_FREEBSD_SMBUS opt_bktr.h
647BKTR_NEW_MSP34XX_DRIVER opt_bktr.h
648
649# Options to support PPS
650UART_PPS_ON_CTS opt_uart.h
651
652# options for bus/device framework
653BUS_DEBUG opt_bus.h
654
655# options for USB support
656USB_DEBUG opt_usb.h
657USB_HOST_ALIGN opt_usb.h
658USB_REQ_DEBUG opt_usb.h
659USB_VERBOSE opt_usb.h
660USB_EHCI_BIG_ENDIAN_DESC opt_usb.h
661U3G_DEBUG opt_u3g.h
662UKBD_DFLT_KEYMAP opt_ukbd.h
663UPLCOM_INTR_INTERVAL opt_uplcom.h
664UVSCOM_DEFAULT_OPKTSIZE opt_uvscom.h
665UVSCOM_INTR_INTERVAL opt_uvscom.h
666
667# Embedded system options
668INIT_PATH
669
670ROOTDEVNAME
671
672FDC_DEBUG opt_fdc.h
673PCFCLOCK_VERBOSE opt_pcfclock.h
674PCFCLOCK_MAX_RETRIES opt_pcfclock.h
675
676KTR opt_global.h
677KTR_ALQ opt_ktr.h
678KTR_MASK opt_ktr.h
679KTR_CPUMASK opt_ktr.h
680KTR_COMPILE opt_global.h
681KTR_ENTRIES opt_global.h
682KTR_VERBOSE opt_ktr.h
683WITNESS opt_global.h
684WITNESS_KDB opt_witness.h
685WITNESS_SKIPSPIN opt_witness.h
686
687# options for ACPI support
688ACPI_DEBUG opt_acpi.h
689ACPI_MAX_TASKS opt_acpi.h
690ACPI_MAX_THREADS opt_acpi.h
691
692# ISA support
693DEV_ISA opt_isa.h
694ISAPNP opt_isa.h
695
696# various 'device presence' options.
697DEV_BPF opt_bpf.h
698DEV_NETMAP opt_global.h
699DEV_MCA opt_mca.h
700DEV_CARP opt_carp.h
701DEV_SPLASH opt_splash.h
702
703# EISA support
704DEV_EISA opt_eisa.h
705EISA_SLOTS opt_eisa.h
706
707# ed driver
708ED_HPP opt_ed.h
709ED_3C503 opt_ed.h
710ED_SIC opt_ed.h
711
712# bce driver
713BCE_DEBUG opt_bce.h
714BCE_NVRAM_WRITE_SUPPORT opt_bce.h
715
716# bxe driver
717BXE_DEBUG opt_bxe.h
718BXE_NVRAM_WRITE_SUPPORT opt_bxe.h
719
720SOCKBUF_DEBUG opt_global.h
721
722
723# options for ubsec driver
724UBSEC_DEBUG opt_ubsec.h
725UBSEC_RNDTEST opt_ubsec.h
726UBSEC_NO_RNG opt_ubsec.h
727
728# options for hifn driver
729HIFN_DEBUG opt_hifn.h
730HIFN_RNDTEST opt_hifn.h
731
732# options for safenet driver
733SAFE_DEBUG opt_safe.h
734SAFE_NO_RNG opt_safe.h
735SAFE_RNDTEST opt_safe.h
736
737# syscons options
738MAXCONS opt_syscons.h
739SC_ALT_MOUSE_IMAGE opt_syscons.h
740SC_CUT_SPACES2TABS opt_syscons.h
741SC_CUT_SEPCHARS opt_syscons.h
742SC_DEBUG_LEVEL opt_syscons.h
743SC_DFLT_FONT opt_syscons.h
744SC_DISABLE_KDBKEY opt_syscons.h
745SC_DISABLE_REBOOT opt_syscons.h
746SC_HISTORY_SIZE opt_syscons.h
747SC_KERNEL_CONS_ATTR opt_syscons.h
748SC_KERNEL_CONS_REV_ATTR opt_syscons.h
749SC_MOUSE_CHAR opt_syscons.h
750SC_NO_CUTPASTE opt_syscons.h
751SC_NO_FONT_LOADING opt_syscons.h
752SC_NO_HISTORY opt_syscons.h
753SC_NO_MODE_CHANGE opt_syscons.h
754SC_NO_SUSPEND_VTYSWITCH opt_syscons.h
755SC_NO_SYSMOUSE opt_syscons.h
756SC_NORM_ATTR opt_syscons.h
757SC_NORM_REV_ATTR opt_syscons.h
758SC_PIXEL_MODE opt_syscons.h
759SC_RENDER_DEBUG opt_syscons.h
760SC_TWOBUTTON_MOUSE opt_syscons.h
761
762# teken terminal emulator options
763TEKEN_CONS25 opt_teken.h
764TEKEN_UTF8 opt_teken.h
765
766# options for printf
767PRINTF_BUFR_SIZE opt_printf.h
768
769# kbd options
770KBD_DISABLE_KEYMAP_LOAD opt_kbd.h
771KBD_INSTALL_CDEV opt_kbd.h
772KBD_MAXRETRY opt_kbd.h
773KBD_MAXWAIT opt_kbd.h
774KBD_RESETDELAY opt_kbd.h
775KBDIO_DEBUG opt_kbd.h
776
777# options for the Atheros driver
778ATH_DEBUG opt_ath.h
779ATH_TXBUF opt_ath.h
780ATH_RXBUF opt_ath.h
781ATH_DIAGAPI opt_ath.h
782ATH_TX99_DIAG opt_ath.h
783ATH_ENABLE_11N opt_ath.h
784ATH_ENABLE_DFS opt_ath.h
785ATH_EEPROM_FIRMWARE opt_ath.h
786ATH_ENABLE_RADIOTAP_VENDOR_EXT opt_ath.h
787
788# options for the Atheros hal
789AH_SUPPORT_AR5416 opt_ah.h
790# XXX For now, this breaks non-AR9130 chipsets, so only use it
791# XXX when actually targetting AR9130.
792AH_SUPPORT_AR9130 opt_ah.h
793
794AH_DEBUG opt_ah.h
795AH_ASSERT opt_ah.h
796AH_DEBUG_ALQ opt_ah.h
797AH_REGOPS_FUNC opt_ah.h
798AH_WRITE_REGDOMAIN opt_ah.h
799AH_DEBUG_COUNTRY opt_ah.h
800AH_WRITE_EEPROM opt_ah.h
801AH_PRIVATE_DIAG opt_ah.h
802AH_NEED_DESC_SWAP opt_ah.h
803AH_USE_INIPDGAIN opt_ah.h
804AH_MAXCHAN opt_ah.h
805AH_RXCFG_SDMAMW_4BYTES opt_ah.h
806
807# AR5416 and later interrupt mitigation
808# XXX do not use this for AR9130
809AH_AR5416_INTERRUPT_MITIGATION opt_ah.h
810
811# options for the Broadcom BCM43xx driver (bwi)
812BWI_DEBUG opt_bwi.h
813BWI_DEBUG_VERBOSE opt_bwi.h
814
815# options for the Marvell 8335 wireless driver
816MALO_DEBUG opt_malo.h
817MALO_TXBUF opt_malo.h
818MALO_RXBUF opt_malo.h
819
820# options for the Marvell wireless driver
821MWL_DEBUG opt_mwl.h
822MWL_TXBUF opt_mwl.h
823MWL_RXBUF opt_mwl.h
824MWL_DIAGAPI opt_mwl.h
825MWL_AGGR_SIZE opt_mwl.h
826MWL_TX_NODROP opt_mwl.h
827
828# dcons options
829DCONS_BUF_SIZE opt_dcons.h
830DCONS_POLL_HZ opt_dcons.h
831DCONS_FORCE_CONSOLE opt_dcons.h
832DCONS_FORCE_GDB opt_dcons.h
833
834# HWPMC options
835HWPMC_HOOKS
836HWPMC_MIPS_BACKTRACE opt_hwpmc_hooks.h
837
838# XBOX options for FreeBSD/i386, but some files are MI
839XBOX opt_xbox.h
840
841# XFS
842XFS
843
844ZFS opt_dontuse.h
845
846# Interrupt filtering
847INTR_FILTER
848
849# 802.11 support layer
850IEEE80211_DEBUG opt_wlan.h
851IEEE80211_DEBUG_REFCNT opt_wlan.h
852IEEE80211_AMPDU_AGE opt_wlan.h
853IEEE80211_SUPPORT_MESH opt_wlan.h
854IEEE80211_SUPPORT_SUPERG opt_wlan.h
855IEEE80211_SUPPORT_TDMA opt_wlan.h
856IEEE80211_ALQ opt_wlan.h
857IEEE80211_DFS_DEBUG opt_wlan.h
858
859# 802.11 TDMA support
860TDMA_SLOTLEN_DEFAULT opt_tdma.h
861TDMA_SLOTCNT_DEFAULT opt_tdma.h
862TDMA_BINTVAL_DEFAULT opt_tdma.h
863TDMA_TXRATE_11B_DEFAULT opt_tdma.h
864TDMA_TXRATE_11G_DEFAULT opt_tdma.h
865TDMA_TXRATE_11A_DEFAULT opt_tdma.h
866TDMA_TXRATE_TURBO_DEFAULT opt_tdma.h
867TDMA_TXRATE_HALF_DEFAULT opt_tdma.h
868TDMA_TXRATE_QUARTER_DEFAULT opt_tdma.h
869TDMA_TXRATE_11NA_DEFAULT opt_tdma.h
870TDMA_TXRATE_11NG_DEFAULT opt_tdma.h
871
872# Network stack virtualization options
873VIMAGE opt_global.h
874VNET_DEBUG opt_global.h
875
876# Common Flash Interface (CFI) options
877CFI_SUPPORT_STRATAFLASH opt_cfi.h
878CFI_ARMEDANDDANGEROUS opt_cfi.h
879
880# Sound options
881SND_DEBUG opt_snd.h
882SND_DIAGNOSTIC opt_snd.h
883SND_FEEDER_MULTIFORMAT opt_snd.h
884SND_FEEDER_FULL_MULTIFORMAT opt_snd.h
885SND_FEEDER_RATE_HP opt_snd.h
886SND_PCM_64 opt_snd.h
887SND_OLDSTEREO opt_snd.h
888
889X86BIOS
890
891# Flattened device tree options
892FDT opt_platform.h
893FDT_DTB_STATIC opt_platform.h
894
895# OFED Infiniband stack
896OFED opt_ofed.h
897OFED_DEBUG_INIT opt_ofed.h
898SDP opt_ofed.h
899SDP_DEBUG opt_ofed.h
900IPOIB opt_ofed.h
901IPOIB_DEBUG opt_ofed.h
902IPOIB_CM opt_ofed.h
903
904# Resource Accounting
905RACCT opt_global.h
906
907# Resource Limits
908RCTL opt_global.h
909
910# At least one of the AR71XX ubiquiti boards has a Redboot configuration
911# that "lies" about the amount of RAM it has. Until a cleaner method is
912# defined, this option will suffice in overriding what Redboot says.
913AR71XX_REALMEM opt_ar71xx.h
914AR71XX_ENV_UBOOT opt_ar71xx.h
915AR71XX_ENV_REDBOOT opt_ar71xx.h
916AR71XX_ATH_EEPROM opt_ar71xx.h