NOTES (7783) | NOTES (7817) |
---|---|
1# 2# LINT -- config file for checking all the sources, tries to pull in 3# as much of the source tree as it can. 4# | 1# 2# LINT -- config file for checking all the sources, tries to pull in 3# as much of the source tree as it can. 4# |
5# $Id: LINT,v 1.167 1995/04/08 21:41:52 phk Exp $ | 5# $Id: LINT,v 1.168 1995/04/12 22:02:51 phk Exp $ |
6# 7# NB: You probably don't want to try running a kernel built from this 8# file. Instead, you should start from GENERIC, and add options from 9# this file as required. 10# 11 12# 13# This directive is mandatory; it defines the architecture to be --- 239 unchanged lines hidden (view full) --- 253 254##################################################################### 255# SCSI DEVICES 256 257# SCSI OPTIONS: 258 259# SCSIDEBUG: When defined enables debugging macros 260# NO_SCSI_SENSE: When defined disables sense descriptions (about 4k) | 6# 7# NB: You probably don't want to try running a kernel built from this 8# file. Instead, you should start from GENERIC, and add options from 9# this file as required. 10# 11 12# 13# This directive is mandatory; it defines the architecture to be --- 239 unchanged lines hidden (view full) --- 253 254##################################################################### 255# SCSI DEVICES 256 257# SCSI OPTIONS: 258 259# SCSIDEBUG: When defined enables debugging macros 260# NO_SCSI_SENSE: When defined disables sense descriptions (about 4k) |
261# SCSI_REPORT_GEOMETRY: Always report disk geometry at boot up instead 262# only when booting verbosely. |
|
261 262# SCSI DEVICE CONFIGURATION 263 264# The SCSI subsystem consists of the `base' SCSI code, a number of 265# high-level SCSI device `type' drivers, and the low-level host-adapter 266# device drivers. The host adapters are listed in the ISA and PCI 267# device configuration sections below. 268# --- 28 unchanged lines hidden (view full) --- 297# configuration and doesn't have to be explicitly configured. 298 299controller scbus0 #base SCSI code 300device ch0 #SCSI media changers 301device sd0 #SCSI disks 302device st0 #SCSI tapes 303device cd0 #SCSI CD-ROMs 304 | 263 264# SCSI DEVICE CONFIGURATION 265 266# The SCSI subsystem consists of the `base' SCSI code, a number of 267# high-level SCSI device `type' drivers, and the low-level host-adapter 268# device drivers. The host adapters are listed in the ISA and PCI 269# device configuration sections below. 270# --- 28 unchanged lines hidden (view full) --- 299# configuration and doesn't have to be explicitly configured. 300 301controller scbus0 #base SCSI code 302device ch0 #SCSI media changers 303device sd0 #SCSI disks 304device st0 #SCSI tapes 305device cd0 #SCSI CD-ROMs 306 |
307device worm0 at scbus? # SCSI worm 308device pt0 at scbus? # SCSI processor type 309device sctarg0 at scbus? # SCSI target 310 |
|
305 306##################################################################### 307# MISCELLANEOUS DEVICES AND OPTIONS 308 309# 310# Of these, only the `log' device is truly mandatory. The `pty' 311# device usually turns out to be ``effectively mandatory'', as it is 312# required for `telnetd', `rlogind', `screen', `emacs', and `xterm', --- 347 unchanged lines hidden --- | 311 312##################################################################### 313# MISCELLANEOUS DEVICES AND OPTIONS 314 315# 316# Of these, only the `log' device is truly mandatory. The `pty' 317# device usually turns out to be ``effectively mandatory'', as it is 318# required for `telnetd', `rlogind', `screen', `emacs', and `xterm', --- 347 unchanged lines hidden --- |