| NOTES (39443) | NOTES (39445) |
|---|---|
| 1# 2# LINT -- config file for checking all the sources, tries to pull in 3# as much of the source tree as it can. 4# | 1# 2# LINT -- config file for checking all the sources, tries to pull in 3# as much of the source tree as it can. 4# |
| 5# $Id: LINT,v 1.468 1998/09/17 21:54:17 nsouch Exp $ | 5# $Id: LINT,v 1.469 1998/09/18 00:01:39 ken Exp $ |
| 6# 7# NB: You probably don't want to try running a kernel built from this 8# file. Instead, you should start from GENERIC, and add options from 9# this file as required. 10# 11 12# 13# This directive is mandatory; it defines the architecture to be --- 657 unchanged lines hidden (view full) --- 671# CAM_MAX_HIGHPOWER: Maximum number of concurrent high power (start unit) cmds 672# SCSI_NO_SENSE_STRINGS: When defined disables sense descriptions 673# SCSI_NO_OP_STRINGS: When defined disables opcode descriptions 674# SCSI_REPORT_GEOMETRY: Always report disk geometry at boot up instead 675# of only when booting verbosely. 676# SCSI_DELAY: The number of MILLISECONDS to freeze the SIM (scsi adapter) 677# queue after a bus reset, and the number of milliseconds to 678# freeze the device queue after a bus device reset. | 6# 7# NB: You probably don't want to try running a kernel built from this 8# file. Instead, you should start from GENERIC, and add options from 9# this file as required. 10# 11 12# 13# This directive is mandatory; it defines the architecture to be --- 657 unchanged lines hidden (view full) --- 671# CAM_MAX_HIGHPOWER: Maximum number of concurrent high power (start unit) cmds 672# SCSI_NO_SENSE_STRINGS: When defined disables sense descriptions 673# SCSI_NO_OP_STRINGS: When defined disables opcode descriptions 674# SCSI_REPORT_GEOMETRY: Always report disk geometry at boot up instead 675# of only when booting verbosely. 676# SCSI_DELAY: The number of MILLISECONDS to freeze the SIM (scsi adapter) 677# queue after a bus reset, and the number of milliseconds to 678# freeze the device queue after a bus device reset. |
| 679# SCSI_CAM: This is only currently needed for the QLogic ISP driver. If 680# you don't have the QLogic driver in your kernel, you don't 681# need this option. | |
| 682options CAMDEBUG 683options "CAM_DEBUG_BUS=-1" 684options "CAM_DEBUG_TARGET=-1" 685options "CAM_DEBUG_LUN=-1" 686options "CAM_DEBUG_FLAGS=CAM_DEBUG_INFO|CAM_DEBUG_TRACE|CAM_DEBUG_SUBTRACE" 687options "CAM_MAX_HIGHPOWER=4" 688options SCSI_NO_SENSE_STRINGS 689options SCSI_NO_OP_STRINGS 690options SCSI_REPORT_GEOMETRY 691options SCSI_DELAY=8000 # Be pessimistic about Joe SCSI device | 679options CAMDEBUG 680options "CAM_DEBUG_BUS=-1" 681options "CAM_DEBUG_TARGET=-1" 682options "CAM_DEBUG_LUN=-1" 683options "CAM_DEBUG_FLAGS=CAM_DEBUG_INFO|CAM_DEBUG_TRACE|CAM_DEBUG_SUBTRACE" 684options "CAM_MAX_HIGHPOWER=4" 685options SCSI_NO_SENSE_STRINGS 686options SCSI_NO_OP_STRINGS 687options SCSI_REPORT_GEOMETRY 688options SCSI_DELAY=8000 # Be pessimistic about Joe SCSI device |
| 692options SCSI_CAM #We're using CAM in this kernel | |
| 693 694# Options for the CAM CDROM driver: 695# CHANGER_MIN_BUSY_SECONDS: Guaranteed minimum time quantum for a changer LUN 696# CHANGER_MAX_BUSY_SECONDS: Maximum time quantum per changer LUN, only 697# enforced if there is I/O waiting for another LUN 698# The compiled in defaults for these variables are 2 and 10 seconds, 699# respectively. 700# --- 1026 unchanged lines hidden --- | 689 690# Options for the CAM CDROM driver: 691# CHANGER_MIN_BUSY_SECONDS: Guaranteed minimum time quantum for a changer LUN 692# CHANGER_MAX_BUSY_SECONDS: Maximum time quantum per changer LUN, only 693# enforced if there is I/O waiting for another LUN 694# The compiled in defaults for these variables are 2 and 10 seconds, 695# respectively. 696# --- 1026 unchanged lines hidden --- |