Deleted Added
sdiff udiff text old ( 88754 ) new ( 89099 )
full compact
1#
2# NOTES -- Lines that can be cut/pasted into kernel and hints configs.
3#
4# Lines that begin with 'device', 'options', 'machine', 'ident', 'maxusers',
5# 'makeoptions', 'hints' etc go into the kernel configuration that you
6# run config(8) with.
7#
8# Lines that begin with 'hints.' are NOT for config(8), they go into your
9# hints file. See /boot/device.hints and/or the 'hints' config(8) directive.
10#
11# Please use ``make LINT'' to create an old-style LINT file if you want to
12# do kernel test-builds.
13#
14# $FreeBSD: head/sys/conf/NOTES 88754 2002-01-01 05:16:03Z julian $
15#
16
17#
18# This directive is mandatory; it defines the architecture to be
19# configured for; in this case, the 386 family based IBM-PC and
20# compatibles.
21#
22machine i386

--- 481 unchanged lines hidden (view full) ---

504
505#
506# Network interfaces:
507# The `loop' device is MANDATORY when networking is enabled.
508# The `ether' device provides generic code to handle
509# Ethernets; it is MANDATORY when a Ethernet device driver is
510# configured or token-ring is enabled.
511# The `fddi' device provides generic code to support FDDI.
512# The `sppp' device serves a similar role for certain types
513# of synchronous PPP links (like `cx', `ar').
514# The `sl' device implements the Serial Line IP (SLIP) service.
515# The `ppp' device implements the Point-to-Point Protocol.
516# The `bpf' device enables the Berkeley Packet Filter. Be
517# aware of the legal and administrative consequences of enabling this
518# option. The number of devices determines the maximum number of
519# simultaneous BPF clients programs runnable.

--- 18 unchanged lines hidden (view full) ---

538# PPP_FILTER enables code for filtering the ppp data stream and selecting
539# events for resetting the demand dial activity timer - requires bpf.
540# See pppd(8) for more details.
541#
542device ether #Generic Ethernet
543device vlan #VLAN support
544device token #Generic TokenRing
545device fddi #Generic FDDI
546device sppp #Generic Synchronous PPP
547device loop 1 #Network loopback device
548device bpf #Berkeley packet filter
549device disc #Discard device (ds0, ds1, etc)
550device tap #Virtual Ethernet driver
551device tun #Tunnel driver (ppp(8), nos-tun(8))
552device sl #Serial Line IP
553device ppp 2 #Point-to-point protocol

--- 1152 unchanged lines hidden (view full) ---

1706# (requires sppp)
1707# awi: Support for IEEE 802.11 PC Card devices using the AMD Am79C930 and
1708# Harris (Intersil) Chipset with PCnetMobile firmware by AMD.
1709# bge: Support for gigabit ethernet adapters based on the Broadcom
1710# BCM570x familiy of controllers, including the 3Com 3c996-T,
1711# the SysKonnect SK-9D21 and SK-9D41, and the embedded gigE NICs
1712# on Dell PowerEdge 2550 servers.
1713# cnw: Xircom CNW/Netware Airsurfer PC Card adapter
1714# cs: IBM Etherjet and other Crystal Semi CS89x0-based adapters
1715# cx: Cronyx/Sigma multiport sync/async (with Cisco or PPP framing)
1716# dc: Support for PCI fast ethernet adapters based on the DEC/Intel 21143
1717# and various workalikes including:
1718# the ADMtek AL981 Comet and AN985 Centaur, the ASIX Electronics
1719# AX88140A and AX88141, the Davicom DM9100 and DM9102, the Lite-On
1720# 82c168 and 82c169 PNIC, the Lite-On/Macronix LC82C115 PNIC II
1721# and the Macronix 98713/98713A/98715/98715A/98725 PMAC. This driver

--- 102 unchanged lines hidden (view full) ---

1824
1825# Order for ISA/EISA devices is important here
1826
1827device ar 1
1828hint.ar.0.at="isa"
1829hint.ar.0.port="0x300"
1830hint.ar.0.irq="10"
1831hint.ar.0.maddr="0xd0000"
1832device cs
1833hint.cs.0.at="isa"
1834hint.cs.0.port="0x300"
1835device cx 1
1836hint.cx.0.at="isa"
1837hint.cx.0.port="0x240"
1838hint.cx.0.irq="15"
1839hint.cx.0.drq="7"

--- 1161 unchanged lines hidden ---