2/*-
3 * Copyright (c) 2007 Luigi Rizzo - Universita` di Pisa. All rights reserved.
4 * Copyright (c) 2007 Hans Petter Selasky. All rights reserved.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
8 * are met:
9 * 1. Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * 2. Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
14 *
15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
16 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
17 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
18 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
19 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
20 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
21 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
22 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
23 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
24 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
25 * SUCH DAMAGE.
26 */
27
28#include <sys/stdint.h>
29#include <sys/stddef.h>
30#include <sys/param.h>
31#include <sys/queue.h>
32#include <sys/types.h>
33#include <sys/systm.h>
34#include <sys/kernel.h>
35#include <sys/bus.h>
36#include <sys/linker_set.h>
37#include <sys/module.h>
38#include <sys/lock.h>
39#include <sys/mutex.h>
40#include <sys/condvar.h>
41#include <sys/sysctl.h>
42#include <sys/sx.h>
43#include <sys/unistd.h>
44#include <sys/callout.h>
45#include <sys/malloc.h>
46#include <sys/priv.h>
47
48#include <dev/usb/usb.h>
49#include <dev/usb/usb_ioctl.h>
50#include <dev/usb/usbdi.h>
51#include <dev/usb/usbdi_util.h>
52
53#define USB_DEBUG_VAR usb_debug
54
55#include <dev/usb/usb_core.h>
56#include <dev/usb/usb_compat_linux.h>
57#include <dev/usb/usb_process.h>
58#include <dev/usb/usb_device.h>
59#include <dev/usb/usb_util.h>
60#include <dev/usb/usb_busdma.h>
61#include <dev/usb/usb_transfer.h>
62#include <dev/usb/usb_hub.h>
63#include <dev/usb/usb_request.h>
64#include <dev/usb/usb_debug.h>
65
66struct usb_linux_softc {
67 LIST_ENTRY(usb_linux_softc) sc_attached_list;
68
69 device_t sc_fbsd_dev;
70 struct usb_device *sc_fbsd_udev;
71 struct usb_interface *sc_ui;
72 struct usb_driver *sc_udrv;
73};
74
75/* prototypes */
76static device_probe_t usb_linux_probe;
77static device_attach_t usb_linux_attach;
78static device_detach_t usb_linux_detach;
79static device_suspend_t usb_linux_suspend;
80static device_resume_t usb_linux_resume;
81
82static usb_callback_t usb_linux_isoc_callback;
83static usb_callback_t usb_linux_non_isoc_callback;
84
85static usb_complete_t usb_linux_wait_complete;
86
87static uint16_t usb_max_isoc_frames(struct usb_device *);
88static int usb_start_wait_urb(struct urb *, usb_timeout_t, uint16_t *);
89static const struct usb_device_id *usb_linux_lookup_id(
90 const struct usb_device_id *, struct usb_attach_arg *);
91static struct usb_driver *usb_linux_get_usb_driver(struct usb_linux_softc *);
92static int usb_linux_create_usb_device(struct usb_device *, device_t);
93static void usb_linux_cleanup_interface(struct usb_device *,
94 struct usb_interface *);
95static void usb_linux_complete(struct usb_xfer *);
96static int usb_unlink_urb_sub(struct urb *, uint8_t);
97
98/*------------------------------------------------------------------------*
99 * FreeBSD USB interface
100 *------------------------------------------------------------------------*/
101
102static LIST_HEAD(, usb_linux_softc) usb_linux_attached_list;
103static LIST_HEAD(, usb_driver) usb_linux_driver_list;
104
105static device_method_t usb_linux_methods[] = {
106 /* Device interface */
107 DEVMETHOD(device_probe, usb_linux_probe),
108 DEVMETHOD(device_attach, usb_linux_attach),
109 DEVMETHOD(device_detach, usb_linux_detach),
110 DEVMETHOD(device_suspend, usb_linux_suspend),
111 DEVMETHOD(device_resume, usb_linux_resume),
112
113 {0, 0}
114};
115
116static driver_t usb_linux_driver = {
117 .name = "usb_linux",
118 .methods = usb_linux_methods,
119 .size = sizeof(struct usb_linux_softc),
120};
121
122static devclass_t usb_linux_devclass;
123
124DRIVER_MODULE(usb_linux, uhub, usb_linux_driver, usb_linux_devclass, NULL, 0);
| 2/*-
3 * Copyright (c) 2007 Luigi Rizzo - Universita` di Pisa. All rights reserved.
4 * Copyright (c) 2007 Hans Petter Selasky. All rights reserved.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
8 * are met:
9 * 1. Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * 2. Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
14 *
15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
16 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
17 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
18 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
19 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
20 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
21 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
22 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
23 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
24 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
25 * SUCH DAMAGE.
26 */
27
28#include <sys/stdint.h>
29#include <sys/stddef.h>
30#include <sys/param.h>
31#include <sys/queue.h>
32#include <sys/types.h>
33#include <sys/systm.h>
34#include <sys/kernel.h>
35#include <sys/bus.h>
36#include <sys/linker_set.h>
37#include <sys/module.h>
38#include <sys/lock.h>
39#include <sys/mutex.h>
40#include <sys/condvar.h>
41#include <sys/sysctl.h>
42#include <sys/sx.h>
43#include <sys/unistd.h>
44#include <sys/callout.h>
45#include <sys/malloc.h>
46#include <sys/priv.h>
47
48#include <dev/usb/usb.h>
49#include <dev/usb/usb_ioctl.h>
50#include <dev/usb/usbdi.h>
51#include <dev/usb/usbdi_util.h>
52
53#define USB_DEBUG_VAR usb_debug
54
55#include <dev/usb/usb_core.h>
56#include <dev/usb/usb_compat_linux.h>
57#include <dev/usb/usb_process.h>
58#include <dev/usb/usb_device.h>
59#include <dev/usb/usb_util.h>
60#include <dev/usb/usb_busdma.h>
61#include <dev/usb/usb_transfer.h>
62#include <dev/usb/usb_hub.h>
63#include <dev/usb/usb_request.h>
64#include <dev/usb/usb_debug.h>
65
66struct usb_linux_softc {
67 LIST_ENTRY(usb_linux_softc) sc_attached_list;
68
69 device_t sc_fbsd_dev;
70 struct usb_device *sc_fbsd_udev;
71 struct usb_interface *sc_ui;
72 struct usb_driver *sc_udrv;
73};
74
75/* prototypes */
76static device_probe_t usb_linux_probe;
77static device_attach_t usb_linux_attach;
78static device_detach_t usb_linux_detach;
79static device_suspend_t usb_linux_suspend;
80static device_resume_t usb_linux_resume;
81
82static usb_callback_t usb_linux_isoc_callback;
83static usb_callback_t usb_linux_non_isoc_callback;
84
85static usb_complete_t usb_linux_wait_complete;
86
87static uint16_t usb_max_isoc_frames(struct usb_device *);
88static int usb_start_wait_urb(struct urb *, usb_timeout_t, uint16_t *);
89static const struct usb_device_id *usb_linux_lookup_id(
90 const struct usb_device_id *, struct usb_attach_arg *);
91static struct usb_driver *usb_linux_get_usb_driver(struct usb_linux_softc *);
92static int usb_linux_create_usb_device(struct usb_device *, device_t);
93static void usb_linux_cleanup_interface(struct usb_device *,
94 struct usb_interface *);
95static void usb_linux_complete(struct usb_xfer *);
96static int usb_unlink_urb_sub(struct urb *, uint8_t);
97
98/*------------------------------------------------------------------------*
99 * FreeBSD USB interface
100 *------------------------------------------------------------------------*/
101
102static LIST_HEAD(, usb_linux_softc) usb_linux_attached_list;
103static LIST_HEAD(, usb_driver) usb_linux_driver_list;
104
105static device_method_t usb_linux_methods[] = {
106 /* Device interface */
107 DEVMETHOD(device_probe, usb_linux_probe),
108 DEVMETHOD(device_attach, usb_linux_attach),
109 DEVMETHOD(device_detach, usb_linux_detach),
110 DEVMETHOD(device_suspend, usb_linux_suspend),
111 DEVMETHOD(device_resume, usb_linux_resume),
112
113 {0, 0}
114};
115
116static driver_t usb_linux_driver = {
117 .name = "usb_linux",
118 .methods = usb_linux_methods,
119 .size = sizeof(struct usb_linux_softc),
120};
121
122static devclass_t usb_linux_devclass;
123
124DRIVER_MODULE(usb_linux, uhub, usb_linux_driver, usb_linux_devclass, NULL, 0);
|
125
126/*------------------------------------------------------------------------*
127 * usb_linux_lookup_id
128 *
129 * This functions takes an array of "struct usb_device_id" and tries
130 * to match the entries with the information in "struct usb_attach_arg".
131 * If it finds a match the matching entry will be returned.
132 * Else "NULL" will be returned.
133 *------------------------------------------------------------------------*/
134static const struct usb_device_id *
135usb_linux_lookup_id(const struct usb_device_id *id, struct usb_attach_arg *uaa)
136{
137 if (id == NULL) {
138 goto done;
139 }
140 /*
141 * Keep on matching array entries until we find one with
142 * "match_flags" equal to zero, which indicates the end of the
143 * array:
144 */
145 for (; id->match_flags; id++) {
146
147 if ((id->match_flags & USB_DEVICE_ID_MATCH_VENDOR) &&
148 (id->idVendor != uaa->info.idVendor)) {
149 continue;
150 }
151 if ((id->match_flags & USB_DEVICE_ID_MATCH_PRODUCT) &&
152 (id->idProduct != uaa->info.idProduct)) {
153 continue;
154 }
155 if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_LO) &&
156 (id->bcdDevice_lo > uaa->info.bcdDevice)) {
157 continue;
158 }
159 if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_HI) &&
160 (id->bcdDevice_hi < uaa->info.bcdDevice)) {
161 continue;
162 }
163 if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_CLASS) &&
164 (id->bDeviceClass != uaa->info.bDeviceClass)) {
165 continue;
166 }
167 if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_SUBCLASS) &&
168 (id->bDeviceSubClass != uaa->info.bDeviceSubClass)) {
169 continue;
170 }
171 if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_PROTOCOL) &&
172 (id->bDeviceProtocol != uaa->info.bDeviceProtocol)) {
173 continue;
174 }
175 if ((uaa->info.bDeviceClass == 0xFF) &&
176 !(id->match_flags & USB_DEVICE_ID_MATCH_VENDOR) &&
177 (id->match_flags & (USB_DEVICE_ID_MATCH_INT_CLASS |
178 USB_DEVICE_ID_MATCH_INT_SUBCLASS |
179 USB_DEVICE_ID_MATCH_INT_PROTOCOL))) {
180 continue;
181 }
182 if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_CLASS) &&
183 (id->bInterfaceClass != uaa->info.bInterfaceClass)) {
184 continue;
185 }
186 if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_SUBCLASS) &&
187 (id->bInterfaceSubClass != uaa->info.bInterfaceSubClass)) {
188 continue;
189 }
190 if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_PROTOCOL) &&
191 (id->bInterfaceProtocol != uaa->info.bInterfaceProtocol)) {
192 continue;
193 }
194 /* we found a match! */
195 return (id);
196 }
197
198done:
199 return (NULL);
200}
201
202/*------------------------------------------------------------------------*
203 * usb_linux_probe
204 *
205 * This function is the FreeBSD probe callback. It is called from the
206 * FreeBSD USB stack through the "device_probe_and_attach()" function.
207 *------------------------------------------------------------------------*/
208static int
209usb_linux_probe(device_t dev)
210{
211 struct usb_attach_arg *uaa = device_get_ivars(dev);
212 struct usb_driver *udrv;
213 int err = ENXIO;
214
215 if (uaa->usb_mode != USB_MODE_HOST) {
216 return (ENXIO);
217 }
218 mtx_lock(&Giant);
219 LIST_FOREACH(udrv, &usb_linux_driver_list, linux_driver_list) {
220 if (usb_linux_lookup_id(udrv->id_table, uaa)) {
221 err = 0;
222 break;
223 }
224 }
225 mtx_unlock(&Giant);
226
227 return (err);
228}
229
230/*------------------------------------------------------------------------*
231 * usb_linux_get_usb_driver
232 *
233 * This function returns the pointer to the "struct usb_driver" where
234 * the Linux USB device driver "struct usb_device_id" match was found.
235 * We apply a lock before reading out the pointer to avoid races.
236 *------------------------------------------------------------------------*/
237static struct usb_driver *
238usb_linux_get_usb_driver(struct usb_linux_softc *sc)
239{
240 struct usb_driver *udrv;
241
242 mtx_lock(&Giant);
243 udrv = sc->sc_udrv;
244 mtx_unlock(&Giant);
245 return (udrv);
246}
247
248/*------------------------------------------------------------------------*
249 * usb_linux_attach
250 *
251 * This function is the FreeBSD attach callback. It is called from the
252 * FreeBSD USB stack through the "device_probe_and_attach()" function.
253 * This function is called when "usb_linux_probe()" returns zero.
254 *------------------------------------------------------------------------*/
255static int
256usb_linux_attach(device_t dev)
257{
258 struct usb_attach_arg *uaa = device_get_ivars(dev);
259 struct usb_linux_softc *sc = device_get_softc(dev);
260 struct usb_driver *udrv;
261 const struct usb_device_id *id = NULL;
262
263 mtx_lock(&Giant);
264 LIST_FOREACH(udrv, &usb_linux_driver_list, linux_driver_list) {
265 id = usb_linux_lookup_id(udrv->id_table, uaa);
266 if (id)
267 break;
268 }
269 mtx_unlock(&Giant);
270
271 if (id == NULL) {
272 return (ENXIO);
273 }
274 if (usb_linux_create_usb_device(uaa->device, dev) != 0)
275 return (ENOMEM);
276 device_set_usb_desc(dev);
277
278 sc->sc_fbsd_udev = uaa->device;
279 sc->sc_fbsd_dev = dev;
280 sc->sc_udrv = udrv;
281 sc->sc_ui = usb_ifnum_to_if(uaa->device, uaa->info.bIfaceNum);
282 if (sc->sc_ui == NULL) {
283 return (EINVAL);
284 }
285 if (udrv->probe) {
286 if ((udrv->probe) (sc->sc_ui, id)) {
287 return (ENXIO);
288 }
289 }
290 mtx_lock(&Giant);
291 LIST_INSERT_HEAD(&usb_linux_attached_list, sc, sc_attached_list);
292 mtx_unlock(&Giant);
293
294 /* success */
295 return (0);
296}
297
298/*------------------------------------------------------------------------*
299 * usb_linux_detach
300 *
301 * This function is the FreeBSD detach callback. It is called from the
302 * FreeBSD USB stack through the "device_detach()" function.
303 *------------------------------------------------------------------------*/
304static int
305usb_linux_detach(device_t dev)
306{
307 struct usb_linux_softc *sc = device_get_softc(dev);
308 struct usb_driver *udrv = NULL;
309
310 mtx_lock(&Giant);
311 if (sc->sc_attached_list.le_prev) {
312 LIST_REMOVE(sc, sc_attached_list);
313 sc->sc_attached_list.le_prev = NULL;
314 udrv = sc->sc_udrv;
315 sc->sc_udrv = NULL;
316 }
317 mtx_unlock(&Giant);
318
319 if (udrv && udrv->disconnect) {
320 (udrv->disconnect) (sc->sc_ui);
321 }
322 /*
323 * Make sure that we free all FreeBSD USB transfers belonging to
324 * this Linux "usb_interface", hence they will most likely not be
325 * needed any more.
326 */
327 usb_linux_cleanup_interface(sc->sc_fbsd_udev, sc->sc_ui);
328 return (0);
329}
330
331/*------------------------------------------------------------------------*
332 * usb_linux_suspend
333 *
334 * This function is the FreeBSD suspend callback. Usually it does nothing.
335 *------------------------------------------------------------------------*/
336static int
337usb_linux_suspend(device_t dev)
338{
339 struct usb_linux_softc *sc = device_get_softc(dev);
340 struct usb_driver *udrv = usb_linux_get_usb_driver(sc);
341 int err;
342
343 if (udrv && udrv->suspend) {
344 err = (udrv->suspend) (sc->sc_ui, 0);
345 }
346 return (0);
347}
348
349/*------------------------------------------------------------------------*
350 * usb_linux_resume
351 *
352 * This function is the FreeBSD resume callback. Usually it does nothing.
353 *------------------------------------------------------------------------*/
354static int
355usb_linux_resume(device_t dev)
356{
357 struct usb_linux_softc *sc = device_get_softc(dev);
358 struct usb_driver *udrv = usb_linux_get_usb_driver(sc);
359 int err;
360
361 if (udrv && udrv->resume) {
362 err = (udrv->resume) (sc->sc_ui);
363 }
364 return (0);
365}
366
367/*------------------------------------------------------------------------*
368 * Linux emulation layer
369 *------------------------------------------------------------------------*/
370
371/*------------------------------------------------------------------------*
372 * usb_max_isoc_frames
373 *
374 * The following function returns the maximum number of isochronous
375 * frames that we support per URB. It is not part of the Linux USB API.
376 *------------------------------------------------------------------------*/
377static uint16_t
378usb_max_isoc_frames(struct usb_device *dev)
379{
380 ; /* indent fix */
381 switch (usbd_get_speed(dev)) {
382 case USB_SPEED_LOW:
383 case USB_SPEED_FULL:
384 return (USB_MAX_FULL_SPEED_ISOC_FRAMES);
385 default:
386 return (USB_MAX_HIGH_SPEED_ISOC_FRAMES);
387 }
388}
389
390/*------------------------------------------------------------------------*
391 * usb_submit_urb
392 *
393 * This function is used to queue an URB after that it has been
394 * initialized. If it returns non-zero, it means that the URB was not
395 * queued.
396 *------------------------------------------------------------------------*/
397int
398usb_submit_urb(struct urb *urb, uint16_t mem_flags)
399{
400 struct usb_host_endpoint *uhe;
401 uint8_t do_unlock;
402 int err;
403
404 if (urb == NULL)
405 return (-EINVAL);
406
407 do_unlock = mtx_owned(&Giant) ? 0 : 1;
408 if (do_unlock)
409 mtx_lock(&Giant);
410
411 if (urb->endpoint == NULL) {
412 err = -EINVAL;
413 goto done;
414 }
415
416 /*
417 * Check to see if the urb is in the process of being killed
418 * and stop a urb that is in the process of being killed from
419 * being re-submitted (e.g. from its completion callback
420 * function).
421 */
422 if (urb->kill_count != 0) {
423 err = -EPERM;
424 goto done;
425 }
426
427 uhe = urb->endpoint;
428
429 /*
430 * Check that we have got a FreeBSD USB transfer that will dequeue
431 * the URB structure and do the real transfer. If there are no USB
432 * transfers, then we return an error.
433 */
434 if (uhe->bsd_xfer[0] ||
435 uhe->bsd_xfer[1]) {
436 /* we are ready! */
437
438 TAILQ_INSERT_TAIL(&uhe->bsd_urb_list, urb, bsd_urb_list);
439
440 urb->status = -EINPROGRESS;
441
442 usbd_transfer_start(uhe->bsd_xfer[0]);
443 usbd_transfer_start(uhe->bsd_xfer[1]);
444 err = 0;
445 } else {
446 /* no pipes have been setup yet! */
447 urb->status = -EINVAL;
448 err = -EINVAL;
449 }
450done:
451 if (do_unlock)
452 mtx_unlock(&Giant);
453 return (err);
454}
455
456/*------------------------------------------------------------------------*
457 * usb_unlink_urb
458 *
459 * This function is used to stop an URB after that it is been
460 * submitted, but before the "complete" callback has been called. On
461 *------------------------------------------------------------------------*/
462int
463usb_unlink_urb(struct urb *urb)
464{
465 return (usb_unlink_urb_sub(urb, 0));
466}
467
468static void
469usb_unlink_bsd(struct usb_xfer *xfer,
470 struct urb *urb, uint8_t drain)
471{
472 if (xfer == NULL)
473 return;
474 if (!usbd_transfer_pending(xfer))
475 return;
476 if (xfer->priv_fifo == (void *)urb) {
477 if (drain) {
478 mtx_unlock(&Giant);
479 usbd_transfer_drain(xfer);
480 mtx_lock(&Giant);
481 } else {
482 usbd_transfer_stop(xfer);
483 }
484 usbd_transfer_start(xfer);
485 }
486}
487
488static int
489usb_unlink_urb_sub(struct urb *urb, uint8_t drain)
490{
491 struct usb_host_endpoint *uhe;
492 uint16_t x;
493 uint8_t do_unlock;
494 int err;
495
496 if (urb == NULL)
497 return (-EINVAL);
498
499 do_unlock = mtx_owned(&Giant) ? 0 : 1;
500 if (do_unlock)
501 mtx_lock(&Giant);
502 if (drain)
503 urb->kill_count++;
504
505 if (urb->endpoint == NULL) {
506 err = -EINVAL;
507 goto done;
508 }
509 uhe = urb->endpoint;
510
511 if (urb->bsd_urb_list.tqe_prev) {
512
513 /* not started yet, just remove it from the queue */
514 TAILQ_REMOVE(&uhe->bsd_urb_list, urb, bsd_urb_list);
515 urb->bsd_urb_list.tqe_prev = NULL;
516 urb->status = -ECONNRESET;
517 urb->actual_length = 0;
518
519 for (x = 0; x < urb->number_of_packets; x++) {
520 urb->iso_frame_desc[x].actual_length = 0;
521 }
522
523 if (urb->complete) {
524 (urb->complete) (urb);
525 }
526 } else {
527
528 /*
529 * If the URB is not on the URB list, then check if one of
530 * the FreeBSD USB transfer are processing the current URB.
531 * If so, re-start that transfer, which will lead to the
532 * termination of that URB:
533 */
534 usb_unlink_bsd(uhe->bsd_xfer[0], urb, drain);
535 usb_unlink_bsd(uhe->bsd_xfer[1], urb, drain);
536 }
537 err = 0;
538done:
539 if (drain)
540 urb->kill_count--;
541 if (do_unlock)
542 mtx_unlock(&Giant);
543 return (err);
544}
545
546/*------------------------------------------------------------------------*
547 * usb_clear_halt
548 *
549 * This function must always be used to clear the stall. Stall is when
550 * an USB endpoint returns a stall message to the USB host controller.
551 * Until the stall is cleared, no data can be transferred.
552 *------------------------------------------------------------------------*/
553int
554usb_clear_halt(struct usb_device *dev, struct usb_host_endpoint *uhe)
555{
556 struct usb_config cfg[1];
557 struct usb_endpoint *ep;
558 uint8_t type;
559 uint8_t addr;
560
561 if (uhe == NULL)
562 return (-EINVAL);
563
564 type = uhe->desc.bmAttributes & UE_XFERTYPE;
565 addr = uhe->desc.bEndpointAddress;
566
567 bzero(cfg, sizeof(cfg));
568
569 cfg[0].type = type;
570 cfg[0].endpoint = addr & UE_ADDR;
571 cfg[0].direction = addr & (UE_DIR_OUT | UE_DIR_IN);
572
573 ep = usbd_get_endpoint(dev, uhe->bsd_iface_index, cfg);
574 if (ep == NULL)
575 return (-EINVAL);
576
577 usbd_clear_data_toggle(dev, ep);
578
579 return (usb_control_msg(dev, &dev->ep0,
580 UR_CLEAR_FEATURE, UT_WRITE_ENDPOINT,
581 UF_ENDPOINT_HALT, addr, NULL, 0, 1000));
582}
583
584/*------------------------------------------------------------------------*
585 * usb_start_wait_urb
586 *
587 * This is an internal function that is used to perform synchronous
588 * Linux USB transfers.
589 *------------------------------------------------------------------------*/
590static int
591usb_start_wait_urb(struct urb *urb, usb_timeout_t timeout, uint16_t *p_actlen)
592{
593 int err;
594 uint8_t do_unlock;
595
596 /* you must have a timeout! */
597 if (timeout == 0) {
598 timeout = 1;
599 }
600 urb->complete = &usb_linux_wait_complete;
601 urb->timeout = timeout;
602 urb->transfer_flags |= URB_WAIT_WAKEUP;
603 urb->transfer_flags &= ~URB_IS_SLEEPING;
604
605 do_unlock = mtx_owned(&Giant) ? 0 : 1;
606 if (do_unlock)
607 mtx_lock(&Giant);
608 err = usb_submit_urb(urb, 0);
609 if (err)
610 goto done;
611
612 /*
613 * the URB might have completed before we get here, so check that by
614 * using some flags!
615 */
616 while (urb->transfer_flags & URB_WAIT_WAKEUP) {
617 urb->transfer_flags |= URB_IS_SLEEPING;
618 cv_wait(&urb->cv_wait, &Giant);
619 urb->transfer_flags &= ~URB_IS_SLEEPING;
620 }
621
622 err = urb->status;
623
624done:
625 if (do_unlock)
626 mtx_unlock(&Giant);
627 if (p_actlen != NULL) {
628 if (err)
629 *p_actlen = 0;
630 else
631 *p_actlen = urb->actual_length;
632 }
633 return (err);
634}
635
636/*------------------------------------------------------------------------*
637 * usb_control_msg
638 *
639 * The following function performs a control transfer sequence one any
640 * control, bulk or interrupt endpoint, specified by "uhe". A control
641 * transfer means that you transfer an 8-byte header first followed by
642 * a data-phase as indicated by the 8-byte header. The "timeout" is
643 * given in milliseconds.
644 *
645 * Return values:
646 * 0: Success
647 * < 0: Failure
648 * > 0: Acutal length
649 *------------------------------------------------------------------------*/
650int
651usb_control_msg(struct usb_device *dev, struct usb_host_endpoint *uhe,
652 uint8_t request, uint8_t requesttype,
653 uint16_t value, uint16_t index, void *data,
654 uint16_t size, usb_timeout_t timeout)
655{
656 struct usb_device_request req;
657 struct urb *urb;
658 int err;
659 uint16_t actlen;
660 uint8_t type;
661 uint8_t addr;
662
663 req.bmRequestType = requesttype;
664 req.bRequest = request;
665 USETW(req.wValue, value);
666 USETW(req.wIndex, index);
667 USETW(req.wLength, size);
668
669 if (uhe == NULL) {
670 return (-EINVAL);
671 }
672 type = (uhe->desc.bmAttributes & UE_XFERTYPE);
673 addr = (uhe->desc.bEndpointAddress & UE_ADDR);
674
675 if (type != UE_CONTROL) {
676 return (-EINVAL);
677 }
678 if (addr == 0) {
679 /*
680 * The FreeBSD USB stack supports standard control
681 * transfers on control endpoint zero:
682 */
683 err = usbd_do_request_flags(dev,
684 NULL, &req, data, USB_SHORT_XFER_OK,
685 &actlen, timeout);
686 if (err) {
687 err = -EPIPE;
688 } else {
689 err = actlen;
690 }
691 return (err);
692 }
693 if (dev->flags.usb_mode != USB_MODE_HOST) {
694 /* not supported */
695 return (-EINVAL);
696 }
697 err = usb_setup_endpoint(dev, uhe, 1 /* dummy */ );
698
699 /*
700 * NOTE: we need to allocate real memory here so that we don't
701 * transfer data to/from the stack!
702 *
703 * 0xFFFF is a FreeBSD specific magic value.
704 */
705 urb = usb_alloc_urb(0xFFFF, size);
706 if (urb == NULL)
707 return (-ENOMEM);
708
709 urb->dev = dev;
710 urb->endpoint = uhe;
711
712 bcopy(&req, urb->setup_packet, sizeof(req));
713
714 if (size && (!(req.bmRequestType & UT_READ))) {
715 /* move the data to a real buffer */
716 bcopy(data, USB_ADD_BYTES(urb->setup_packet,
717 sizeof(req)), size);
718 }
719 err = usb_start_wait_urb(urb, timeout, &actlen);
720
721 if (req.bmRequestType & UT_READ) {
722 if (actlen) {
723 bcopy(USB_ADD_BYTES(urb->setup_packet,
724 sizeof(req)), data, actlen);
725 }
726 }
727 usb_free_urb(urb);
728
729 if (err == 0) {
730 err = actlen;
731 }
732 return (err);
733}
734
735/*------------------------------------------------------------------------*
736 * usb_set_interface
737 *
738 * The following function will select which alternate setting of an
739 * USB interface you plan to use. By default alternate setting with
740 * index zero is selected. Note that "iface_no" is not the interface
741 * index, but rather the value of "bInterfaceNumber".
742 *------------------------------------------------------------------------*/
743int
744usb_set_interface(struct usb_device *dev, uint8_t iface_no, uint8_t alt_index)
745{
746 struct usb_interface *p_ui = usb_ifnum_to_if(dev, iface_no);
747 int err;
748
749 if (p_ui == NULL)
750 return (-EINVAL);
751 if (alt_index >= p_ui->num_altsetting)
752 return (-EINVAL);
753 usb_linux_cleanup_interface(dev, p_ui);
754 err = -usbd_set_alt_interface_index(dev,
755 p_ui->bsd_iface_index, alt_index);
756 if (err == 0) {
757 p_ui->cur_altsetting = p_ui->altsetting + alt_index;
758 }
759 return (err);
760}
761
762/*------------------------------------------------------------------------*
763 * usb_setup_endpoint
764 *
765 * The following function is an extension to the Linux USB API that
766 * allows you to set a maximum buffer size for a given USB endpoint.
767 * The maximum buffer size is per URB. If you don't call this function
768 * to set a maximum buffer size, the endpoint will not be functional.
769 * Note that for isochronous endpoints the maximum buffer size must be
770 * a non-zero dummy, hence this function will base the maximum buffer
771 * size on "wMaxPacketSize".
772 *------------------------------------------------------------------------*/
773int
774usb_setup_endpoint(struct usb_device *dev,
775 struct usb_host_endpoint *uhe, usb_size_t bufsize)
776{
777 struct usb_config cfg[2];
778 uint8_t type = uhe->desc.bmAttributes & UE_XFERTYPE;
779 uint8_t addr = uhe->desc.bEndpointAddress;
780
781 if (uhe->fbsd_buf_size == bufsize) {
782 /* optimize */
783 return (0);
784 }
785 usbd_transfer_unsetup(uhe->bsd_xfer, 2);
786
787 uhe->fbsd_buf_size = bufsize;
788
789 if (bufsize == 0) {
790 return (0);
791 }
792 bzero(cfg, sizeof(cfg));
793
794 if (type == UE_ISOCHRONOUS) {
795
796 /*
797 * Isochronous transfers are special in that they don't fit
798 * into the BULK/INTR/CONTROL transfer model.
799 */
800
801 cfg[0].type = type;
802 cfg[0].endpoint = addr & UE_ADDR;
803 cfg[0].direction = addr & (UE_DIR_OUT | UE_DIR_IN);
804 cfg[0].callback = &usb_linux_isoc_callback;
805 cfg[0].bufsize = 0; /* use wMaxPacketSize */
806 cfg[0].frames = usb_max_isoc_frames(dev);
807 cfg[0].flags.proxy_buffer = 1;
808#if 0
809 /*
810 * The Linux USB API allows non back-to-back
811 * isochronous frames which we do not support. If the
812 * isochronous frames are not back-to-back we need to
813 * do a copy, and then we need a buffer for
814 * that. Enable this at your own risk.
815 */
816 cfg[0].flags.ext_buffer = 1;
817#endif
818 cfg[0].flags.short_xfer_ok = 1;
819
820 bcopy(cfg, cfg + 1, sizeof(*cfg));
821
822 /* Allocate and setup two generic FreeBSD USB transfers */
823
824 if (usbd_transfer_setup(dev, &uhe->bsd_iface_index,
825 uhe->bsd_xfer, cfg, 2, uhe, &Giant)) {
826 return (-EINVAL);
827 }
828 } else {
829 if (bufsize > (1 << 22)) {
830 /* limit buffer size */
831 bufsize = (1 << 22);
832 }
833 /* Allocate and setup one generic FreeBSD USB transfer */
834
835 cfg[0].type = type;
836 cfg[0].endpoint = addr & UE_ADDR;
837 cfg[0].direction = addr & (UE_DIR_OUT | UE_DIR_IN);
838 cfg[0].callback = &usb_linux_non_isoc_callback;
839 cfg[0].bufsize = bufsize;
840 cfg[0].flags.ext_buffer = 1; /* enable zero-copy */
841 cfg[0].flags.proxy_buffer = 1;
842 cfg[0].flags.short_xfer_ok = 1;
843
844 if (usbd_transfer_setup(dev, &uhe->bsd_iface_index,
845 uhe->bsd_xfer, cfg, 1, uhe, &Giant)) {
846 return (-EINVAL);
847 }
848 }
849 return (0);
850}
851
852/*------------------------------------------------------------------------*
853 * usb_linux_create_usb_device
854 *
855 * The following function is used to build up a per USB device
856 * structure tree, that mimics the Linux one. The root structure
857 * is returned by this function.
858 *------------------------------------------------------------------------*/
859static int
860usb_linux_create_usb_device(struct usb_device *udev, device_t dev)
861{
862 struct usb_config_descriptor *cd = usbd_get_config_descriptor(udev);
863 struct usb_descriptor *desc;
864 struct usb_interface_descriptor *id;
865 struct usb_endpoint_descriptor *ed;
866 struct usb_interface *p_ui = NULL;
867 struct usb_host_interface *p_uhi = NULL;
868 struct usb_host_endpoint *p_uhe = NULL;
869 usb_size_t size;
870 uint16_t niface_total;
871 uint16_t nedesc;
872 uint16_t iface_no_curr;
873 uint16_t iface_index;
874 uint8_t pass;
875 uint8_t iface_no;
876
877 /*
878 * We do two passes. One pass for computing necessary memory size
879 * and one pass to initialize all the allocated memory structures.
880 */
881 for (pass = 0; pass < 2; pass++) {
882
883 iface_no_curr = 0 - 1;
884 niface_total = 0;
885 iface_index = 0;
886 nedesc = 0;
887 desc = NULL;
888
889 /*
890 * Iterate over all the USB descriptors. Use the USB config
891 * descriptor pointer provided by the FreeBSD USB stack.
892 */
893 while ((desc = usb_desc_foreach(cd, desc))) {
894
895 /*
896 * Build up a tree according to the descriptors we
897 * find:
898 */
899 switch (desc->bDescriptorType) {
900 case UDESC_DEVICE:
901 break;
902
903 case UDESC_ENDPOINT:
904 ed = (void *)desc;
905 if ((ed->bLength < sizeof(*ed)) ||
906 (iface_index == 0))
907 break;
908 if (p_uhe) {
909 bcopy(ed, &p_uhe->desc, sizeof(p_uhe->desc));
910 p_uhe->bsd_iface_index = iface_index - 1;
911 TAILQ_INIT(&p_uhe->bsd_urb_list);
912 p_uhe++;
913 }
914 if (p_uhi) {
915 (p_uhi - 1)->desc.bNumEndpoints++;
916 }
917 nedesc++;
918 break;
919
920 case UDESC_INTERFACE:
921 id = (void *)desc;
922 if (id->bLength < sizeof(*id))
923 break;
924 if (p_uhi) {
925 bcopy(id, &p_uhi->desc, sizeof(p_uhi->desc));
926 p_uhi->desc.bNumEndpoints = 0;
927 p_uhi->endpoint = p_uhe;
928 p_uhi->string = "";
929 p_uhi->bsd_iface_index = iface_index;
930 p_uhi++;
931 }
932 iface_no = id->bInterfaceNumber;
933 niface_total++;
934 if (iface_no_curr != iface_no) {
935 if (p_ui) {
936 p_ui->altsetting = p_uhi - 1;
937 p_ui->cur_altsetting = p_uhi - 1;
938 p_ui->num_altsetting = 1;
939 p_ui->bsd_iface_index = iface_index;
940 p_ui->linux_udev = udev;
941 p_ui++;
942 }
943 iface_no_curr = iface_no;
944 iface_index++;
945 } else {
946 if (p_ui) {
947 (p_ui - 1)->num_altsetting++;
948 }
949 }
950 break;
951
952 default:
953 break;
954 }
955 }
956
957 if (pass == 0) {
958
959 size = (sizeof(*p_uhe) * nedesc) +
960 (sizeof(*p_ui) * iface_index) +
961 (sizeof(*p_uhi) * niface_total);
962
963 p_uhe = malloc(size, M_USBDEV, M_WAITOK | M_ZERO);
964 p_ui = (void *)(p_uhe + nedesc);
965 p_uhi = (void *)(p_ui + iface_index);
966
967 udev->linux_iface_start = p_ui;
968 udev->linux_iface_end = p_ui + iface_index;
969 udev->linux_endpoint_start = p_uhe;
970 udev->linux_endpoint_end = p_uhe + nedesc;
971 udev->devnum = device_get_unit(dev);
972 bcopy(&udev->ddesc, &udev->descriptor,
973 sizeof(udev->descriptor));
974 bcopy(udev->ctrl_ep.edesc, &udev->ep0.desc,
975 sizeof(udev->ep0.desc));
976 }
977 }
978 return (0);
979}
980
981/*------------------------------------------------------------------------*
982 * usb_alloc_urb
983 *
984 * This function should always be used when you allocate an URB for
985 * use with the USB Linux stack. In case of an isochronous transfer
986 * you must specifiy the maximum number of "iso_packets" which you
987 * plan to transfer per URB. This function is always blocking, and
988 * "mem_flags" are not regarded like on Linux.
989 *------------------------------------------------------------------------*/
990struct urb *
991usb_alloc_urb(uint16_t iso_packets, uint16_t mem_flags)
992{
993 struct urb *urb;
994 usb_size_t size;
995
996 if (iso_packets == 0xFFFF) {
997 /*
998 * FreeBSD specific magic value to ask for control transfer
999 * memory allocation:
1000 */
1001 size = sizeof(*urb) + sizeof(struct usb_device_request) + mem_flags;
1002 } else {
1003 size = sizeof(*urb) + (iso_packets * sizeof(urb->iso_frame_desc[0]));
1004 }
1005
1006 urb = malloc(size, M_USBDEV, M_WAITOK | M_ZERO);
1007 if (urb) {
1008
1009 cv_init(&urb->cv_wait, "URBWAIT");
1010 if (iso_packets == 0xFFFF) {
1011 urb->setup_packet = (void *)(urb + 1);
1012 urb->transfer_buffer = (void *)(urb->setup_packet +
1013 sizeof(struct usb_device_request));
1014 } else {
1015 urb->number_of_packets = iso_packets;
1016 }
1017 }
1018 return (urb);
1019}
1020
1021/*------------------------------------------------------------------------*
1022 * usb_find_host_endpoint
1023 *
1024 * The following function will return the Linux USB host endpoint
1025 * structure that matches the given endpoint type and endpoint
1026 * value. If no match is found, NULL is returned. This function is not
1027 * part of the Linux USB API and is only used internally.
1028 *------------------------------------------------------------------------*/
1029struct usb_host_endpoint *
1030usb_find_host_endpoint(struct usb_device *dev, uint8_t type, uint8_t ep)
1031{
1032 struct usb_host_endpoint *uhe;
1033 struct usb_host_endpoint *uhe_end;
1034 struct usb_host_interface *uhi;
1035 struct usb_interface *ui;
1036 uint8_t ea;
1037 uint8_t at;
1038 uint8_t mask;
1039
1040 if (dev == NULL) {
1041 return (NULL);
1042 }
1043 if (type == UE_CONTROL) {
1044 mask = UE_ADDR;
1045 } else {
1046 mask = (UE_DIR_IN | UE_DIR_OUT | UE_ADDR);
1047 }
1048
1049 ep &= mask;
1050
1051 /*
1052 * Iterate over all the interfaces searching the selected alternate
1053 * setting only, and all belonging endpoints.
1054 */
1055 for (ui = dev->linux_iface_start;
1056 ui != dev->linux_iface_end;
1057 ui++) {
1058 uhi = ui->cur_altsetting;
1059 if (uhi) {
1060 uhe_end = uhi->endpoint + uhi->desc.bNumEndpoints;
1061 for (uhe = uhi->endpoint;
1062 uhe != uhe_end;
1063 uhe++) {
1064 ea = uhe->desc.bEndpointAddress;
1065 at = uhe->desc.bmAttributes;
1066
1067 if (((ea & mask) == ep) &&
1068 ((at & UE_XFERTYPE) == type)) {
1069 return (uhe);
1070 }
1071 }
1072 }
1073 }
1074
1075 if ((type == UE_CONTROL) && ((ep & UE_ADDR) == 0)) {
1076 return (&dev->ep0);
1077 }
1078 return (NULL);
1079}
1080
1081/*------------------------------------------------------------------------*
1082 * usb_altnum_to_altsetting
1083 *
1084 * The following function returns a pointer to an alternate setting by
1085 * index given a "usb_interface" pointer. If the alternate setting by
1086 * index does not exist, NULL is returned. And alternate setting is a
1087 * variant of an interface, but usually with slightly different
1088 * characteristics.
1089 *------------------------------------------------------------------------*/
1090struct usb_host_interface *
1091usb_altnum_to_altsetting(const struct usb_interface *intf, uint8_t alt_index)
1092{
1093 if (alt_index >= intf->num_altsetting) {
1094 return (NULL);
1095 }
1096 return (intf->altsetting + alt_index);
1097}
1098
1099/*------------------------------------------------------------------------*
1100 * usb_ifnum_to_if
1101 *
1102 * The following function searches up an USB interface by
1103 * "bInterfaceNumber". If no match is found, NULL is returned.
1104 *------------------------------------------------------------------------*/
1105struct usb_interface *
1106usb_ifnum_to_if(struct usb_device *dev, uint8_t iface_no)
1107{
1108 struct usb_interface *p_ui;
1109
1110 for (p_ui = dev->linux_iface_start;
1111 p_ui != dev->linux_iface_end;
1112 p_ui++) {
1113 if ((p_ui->num_altsetting > 0) &&
1114 (p_ui->altsetting->desc.bInterfaceNumber == iface_no)) {
1115 return (p_ui);
1116 }
1117 }
1118 return (NULL);
1119}
1120
1121/*------------------------------------------------------------------------*
1122 * usb_buffer_alloc
1123 *------------------------------------------------------------------------*/
1124void *
1125usb_buffer_alloc(struct usb_device *dev, usb_size_t size, uint16_t mem_flags, uint8_t *dma_addr)
1126{
1127 return (malloc(size, M_USBDEV, M_WAITOK | M_ZERO));
1128}
1129
1130/*------------------------------------------------------------------------*
1131 * usbd_get_intfdata
1132 *------------------------------------------------------------------------*/
1133void *
1134usbd_get_intfdata(struct usb_interface *intf)
1135{
1136 return (intf->bsd_priv_sc);
1137}
1138
1139/*------------------------------------------------------------------------*
1140 * usb_linux_register
1141 *
1142 * The following function is used by the "USB_DRIVER_EXPORT()" macro,
1143 * and is used to register a Linux USB driver, so that its
1144 * "usb_device_id" structures gets searched a probe time. This
1145 * function is not part of the Linux USB API, and is for internal use
1146 * only.
1147 *------------------------------------------------------------------------*/
1148void
1149usb_linux_register(void *arg)
1150{
1151 struct usb_driver *drv = arg;
1152
1153 mtx_lock(&Giant);
1154 LIST_INSERT_HEAD(&usb_linux_driver_list, drv, linux_driver_list);
1155 mtx_unlock(&Giant);
1156
1157 usb_needs_explore_all();
1158}
1159
1160/*------------------------------------------------------------------------*
1161 * usb_linux_deregister
1162 *
1163 * The following function is used by the "USB_DRIVER_EXPORT()" macro,
1164 * and is used to deregister a Linux USB driver. This function will
1165 * ensure that all driver instances belonging to the Linux USB device
1166 * driver in question, gets detached before the driver is
1167 * unloaded. This function is not part of the Linux USB API, and is
1168 * for internal use only.
1169 *------------------------------------------------------------------------*/
1170void
1171usb_linux_deregister(void *arg)
1172{
1173 struct usb_driver *drv = arg;
1174 struct usb_linux_softc *sc;
1175
1176repeat:
1177 mtx_lock(&Giant);
1178 LIST_FOREACH(sc, &usb_linux_attached_list, sc_attached_list) {
1179 if (sc->sc_udrv == drv) {
1180 mtx_unlock(&Giant);
1181 device_detach(sc->sc_fbsd_dev);
1182 goto repeat;
1183 }
1184 }
1185 LIST_REMOVE(drv, linux_driver_list);
1186 mtx_unlock(&Giant);
1187}
1188
1189/*------------------------------------------------------------------------*
1190 * usb_linux_free_device
1191 *
1192 * The following function is only used by the FreeBSD USB stack, to
1193 * cleanup and free memory after that a Linux USB device was attached.
1194 *------------------------------------------------------------------------*/
1195void
1196usb_linux_free_device(struct usb_device *dev)
1197{
1198 struct usb_host_endpoint *uhe;
1199 struct usb_host_endpoint *uhe_end;
1200 int err;
1201
1202 uhe = dev->linux_endpoint_start;
1203 uhe_end = dev->linux_endpoint_end;
1204 while (uhe != uhe_end) {
1205 err = usb_setup_endpoint(dev, uhe, 0);
1206 uhe++;
1207 }
1208 err = usb_setup_endpoint(dev, &dev->ep0, 0);
1209 free(dev->linux_endpoint_start, M_USBDEV);
1210}
1211
1212/*------------------------------------------------------------------------*
1213 * usb_buffer_free
1214 *------------------------------------------------------------------------*/
1215void
1216usb_buffer_free(struct usb_device *dev, usb_size_t size,
1217 void *addr, uint8_t dma_addr)
1218{
1219 free(addr, M_USBDEV);
1220}
1221
1222/*------------------------------------------------------------------------*
1223 * usb_free_urb
1224 *------------------------------------------------------------------------*/
1225void
1226usb_free_urb(struct urb *urb)
1227{
1228 if (urb == NULL) {
1229 return;
1230 }
1231 /* make sure that the current URB is not active */
1232 usb_kill_urb(urb);
1233
1234 /* destroy condition variable */
1235 cv_destroy(&urb->cv_wait);
1236
1237 /* just free it */
1238 free(urb, M_USBDEV);
1239}
1240
1241/*------------------------------------------------------------------------*
1242 * usb_init_urb
1243 *
1244 * The following function can be used to initialize a custom URB. It
1245 * is not recommended to use this function. Use "usb_alloc_urb()"
1246 * instead.
1247 *------------------------------------------------------------------------*/
1248void
1249usb_init_urb(struct urb *urb)
1250{
1251 if (urb == NULL) {
1252 return;
1253 }
1254 bzero(urb, sizeof(*urb));
1255}
1256
1257/*------------------------------------------------------------------------*
1258 * usb_kill_urb
1259 *------------------------------------------------------------------------*/
1260void
1261usb_kill_urb(struct urb *urb)
1262{
1263 usb_unlink_urb_sub(urb, 1);
1264}
1265
1266/*------------------------------------------------------------------------*
1267 * usb_set_intfdata
1268 *
1269 * The following function sets the per Linux USB interface private
1270 * data pointer. It is used by most Linux USB device drivers.
1271 *------------------------------------------------------------------------*/
1272void
1273usb_set_intfdata(struct usb_interface *intf, void *data)
1274{
1275 intf->bsd_priv_sc = data;
1276}
1277
1278/*------------------------------------------------------------------------*
1279 * usb_linux_cleanup_interface
1280 *
1281 * The following function will release all FreeBSD USB transfers
1282 * associated with a Linux USB interface. It is for internal use only.
1283 *------------------------------------------------------------------------*/
1284static void
1285usb_linux_cleanup_interface(struct usb_device *dev, struct usb_interface *iface)
1286{
1287 struct usb_host_interface *uhi;
1288 struct usb_host_interface *uhi_end;
1289 struct usb_host_endpoint *uhe;
1290 struct usb_host_endpoint *uhe_end;
1291 int err;
1292
1293 uhi = iface->altsetting;
1294 uhi_end = iface->altsetting + iface->num_altsetting;
1295 while (uhi != uhi_end) {
1296 uhe = uhi->endpoint;
1297 uhe_end = uhi->endpoint + uhi->desc.bNumEndpoints;
1298 while (uhe != uhe_end) {
1299 err = usb_setup_endpoint(dev, uhe, 0);
1300 uhe++;
1301 }
1302 uhi++;
1303 }
1304}
1305
1306/*------------------------------------------------------------------------*
1307 * usb_linux_wait_complete
1308 *
1309 * The following function is used by "usb_start_wait_urb()" to wake it
1310 * up, when an USB transfer has finished.
1311 *------------------------------------------------------------------------*/
1312static void
1313usb_linux_wait_complete(struct urb *urb)
1314{
1315 if (urb->transfer_flags & URB_IS_SLEEPING) {
1316 cv_signal(&urb->cv_wait);
1317 }
1318 urb->transfer_flags &= ~URB_WAIT_WAKEUP;
1319}
1320
1321/*------------------------------------------------------------------------*
1322 * usb_linux_complete
1323 *------------------------------------------------------------------------*/
1324static void
1325usb_linux_complete(struct usb_xfer *xfer)
1326{
1327 struct urb *urb;
1328
1329 urb = usbd_xfer_get_priv(xfer);
1330 usbd_xfer_set_priv(xfer, NULL);
1331 if (urb->complete) {
1332 (urb->complete) (urb);
1333 }
1334}
1335
1336/*------------------------------------------------------------------------*
1337 * usb_linux_isoc_callback
1338 *
1339 * The following is the FreeBSD isochronous USB callback. Isochronous
1340 * frames are USB packets transferred 1000 or 8000 times per second,
1341 * depending on whether a full- or high- speed USB transfer is
1342 * used.
1343 *------------------------------------------------------------------------*/
1344static void
1345usb_linux_isoc_callback(struct usb_xfer *xfer, usb_error_t error)
1346{
1347 usb_frlength_t max_frame = xfer->max_frame_size;
1348 usb_frlength_t offset;
1349 usb_frcount_t x;
1350 struct urb *urb = usbd_xfer_get_priv(xfer);
1351 struct usb_host_endpoint *uhe = usbd_xfer_softc(xfer);
1352 struct usb_iso_packet_descriptor *uipd;
1353
1354 DPRINTF("\n");
1355
1356 switch (USB_GET_STATE(xfer)) {
1357 case USB_ST_TRANSFERRED:
1358
1359 if (urb->bsd_isread) {
1360
1361 /* copy in data with regard to the URB */
1362
1363 offset = 0;
1364
1365 for (x = 0; x < urb->number_of_packets; x++) {
1366 uipd = urb->iso_frame_desc + x;
1367 if (uipd->length > xfer->frlengths[x]) {
1368 if (urb->transfer_flags & URB_SHORT_NOT_OK) {
1369 /* XXX should be EREMOTEIO */
1370 uipd->status = -EPIPE;
1371 } else {
1372 uipd->status = 0;
1373 }
1374 } else {
1375 uipd->status = 0;
1376 }
1377 uipd->actual_length = xfer->frlengths[x];
1378 if (!xfer->flags.ext_buffer) {
1379 usbd_copy_out(xfer->frbuffers, offset,
1380 USB_ADD_BYTES(urb->transfer_buffer,
1381 uipd->offset), uipd->actual_length);
1382 }
1383 offset += max_frame;
1384 }
1385 } else {
1386 for (x = 0; x < urb->number_of_packets; x++) {
1387 uipd = urb->iso_frame_desc + x;
1388 uipd->actual_length = xfer->frlengths[x];
1389 uipd->status = 0;
1390 }
1391 }
1392
1393 urb->actual_length = xfer->actlen;
1394
1395 /* check for short transfer */
1396 if (xfer->actlen < xfer->sumlen) {
1397 /* short transfer */
1398 if (urb->transfer_flags & URB_SHORT_NOT_OK) {
1399 /* XXX should be EREMOTEIO */
1400 urb->status = -EPIPE;
1401 } else {
1402 urb->status = 0;
1403 }
1404 } else {
1405 /* success */
1406 urb->status = 0;
1407 }
1408
1409 /* call callback */
1410 usb_linux_complete(xfer);
1411
1412 case USB_ST_SETUP:
1413tr_setup:
1414
1415 if (xfer->priv_fifo == NULL) {
1416
1417 /* get next transfer */
1418 urb = TAILQ_FIRST(&uhe->bsd_urb_list);
1419 if (urb == NULL) {
1420 /* nothing to do */
1421 return;
1422 }
1423 TAILQ_REMOVE(&uhe->bsd_urb_list, urb, bsd_urb_list);
1424 urb->bsd_urb_list.tqe_prev = NULL;
1425
1426 x = xfer->max_frame_count;
1427 if (urb->number_of_packets > x) {
1428 /* XXX simply truncate the transfer */
1429 urb->number_of_packets = x;
1430 }
1431 } else {
1432 DPRINTF("Already got a transfer\n");
1433
1434 /* already got a transfer (should not happen) */
1435 urb = usbd_xfer_get_priv(xfer);
1436 }
1437
1438 urb->bsd_isread = (uhe->desc.bEndpointAddress & UE_DIR_IN) ? 1 : 0;
1439
1440 if (xfer->flags.ext_buffer) {
1441 /* set virtual address to load */
1442 usbd_xfer_set_frame_data(xfer, 0, urb->transfer_buffer, 0);
1443 }
1444 if (!(urb->bsd_isread)) {
1445
1446 /* copy out data with regard to the URB */
1447
1448 offset = 0;
1449
1450 for (x = 0; x < urb->number_of_packets; x++) {
1451 uipd = urb->iso_frame_desc + x;
1452 usbd_xfer_set_frame_len(xfer, x, uipd->length);
1453 if (!xfer->flags.ext_buffer) {
1454 usbd_copy_in(xfer->frbuffers, offset,
1455 USB_ADD_BYTES(urb->transfer_buffer,
1456 uipd->offset), uipd->length);
1457 }
1458 offset += uipd->length;
1459 }
1460 } else {
1461
1462 /*
1463 * compute the transfer length into the "offset"
1464 * variable
1465 */
1466
1467 offset = urb->number_of_packets * max_frame;
1468
1469 /* setup "frlengths" array */
1470
1471 for (x = 0; x < urb->number_of_packets; x++) {
1472 uipd = urb->iso_frame_desc + x;
1473 usbd_xfer_set_frame_len(xfer, x, max_frame);
1474 }
1475 }
1476 usbd_xfer_set_priv(xfer, urb);
1477 xfer->flags.force_short_xfer = 0;
1478 xfer->timeout = urb->timeout;
1479 xfer->nframes = urb->number_of_packets;
1480 usbd_transfer_submit(xfer);
1481 return;
1482
1483 default: /* Error */
1484 if (xfer->error == USB_ERR_CANCELLED) {
1485 urb->status = -ECONNRESET;
1486 } else {
1487 urb->status = -EPIPE; /* stalled */
1488 }
1489
1490 /* Set zero for "actual_length" */
1491 urb->actual_length = 0;
1492
1493 /* Set zero for "actual_length" */
1494 for (x = 0; x < urb->number_of_packets; x++) {
1495 urb->iso_frame_desc[x].actual_length = 0;
1496 urb->iso_frame_desc[x].status = urb->status;
1497 }
1498
1499 /* call callback */
1500 usb_linux_complete(xfer);
1501
1502 if (xfer->error == USB_ERR_CANCELLED) {
1503 /* we need to return in this case */
1504 return;
1505 }
1506 goto tr_setup;
1507
1508 }
1509}
1510
1511/*------------------------------------------------------------------------*
1512 * usb_linux_non_isoc_callback
1513 *
1514 * The following is the FreeBSD BULK/INTERRUPT and CONTROL USB
1515 * callback. It dequeues Linux USB stack compatible URB's, transforms
1516 * the URB fields into a FreeBSD USB transfer, and defragments the USB
1517 * transfer as required. When the transfer is complete the "complete"
1518 * callback is called.
1519 *------------------------------------------------------------------------*/
1520static void
1521usb_linux_non_isoc_callback(struct usb_xfer *xfer, usb_error_t error)
1522{
1523 enum {
1524 REQ_SIZE = sizeof(struct usb_device_request)
1525 };
1526 struct urb *urb = usbd_xfer_get_priv(xfer);
1527 struct usb_host_endpoint *uhe = usbd_xfer_softc(xfer);
1528 uint8_t *ptr;
1529 usb_frlength_t max_bulk = usbd_xfer_max_len(xfer);
1530 uint8_t data_frame = xfer->flags_int.control_xfr ? 1 : 0;
1531
1532 DPRINTF("\n");
1533
1534 switch (USB_GET_STATE(xfer)) {
1535 case USB_ST_TRANSFERRED:
1536
1537 if (xfer->flags_int.control_xfr) {
1538
1539 /* don't transfer the setup packet again: */
1540
1541 usbd_xfer_set_frame_len(xfer, 0, 0);
1542 }
1543 if (urb->bsd_isread && (!xfer->flags.ext_buffer)) {
1544 /* copy in data with regard to the URB */
1545 usbd_copy_out(xfer->frbuffers + data_frame, 0,
1546 urb->bsd_data_ptr, xfer->frlengths[data_frame]);
1547 }
1548 urb->bsd_length_rem -= xfer->frlengths[data_frame];
1549 urb->bsd_data_ptr += xfer->frlengths[data_frame];
1550 urb->actual_length += xfer->frlengths[data_frame];
1551
1552 /* check for short transfer */
1553 if (xfer->actlen < xfer->sumlen) {
1554 urb->bsd_length_rem = 0;
1555
1556 /* short transfer */
1557 if (urb->transfer_flags & URB_SHORT_NOT_OK) {
1558 urb->status = -EPIPE;
1559 } else {
1560 urb->status = 0;
1561 }
1562 } else {
1563 /* check remainder */
1564 if (urb->bsd_length_rem > 0) {
1565 goto setup_bulk;
1566 }
1567 /* success */
1568 urb->status = 0;
1569 }
1570
1571 /* call callback */
1572 usb_linux_complete(xfer);
1573
1574 case USB_ST_SETUP:
1575tr_setup:
1576 /* get next transfer */
1577 urb = TAILQ_FIRST(&uhe->bsd_urb_list);
1578 if (urb == NULL) {
1579 /* nothing to do */
1580 return;
1581 }
1582 TAILQ_REMOVE(&uhe->bsd_urb_list, urb, bsd_urb_list);
1583 urb->bsd_urb_list.tqe_prev = NULL;
1584
1585 usbd_xfer_set_priv(xfer, urb);
1586 xfer->flags.force_short_xfer = 0;
1587 xfer->timeout = urb->timeout;
1588
1589 if (xfer->flags_int.control_xfr) {
1590
1591 /*
1592 * USB control transfers need special handling.
1593 * First copy in the header, then copy in data!
1594 */
1595 if (!xfer->flags.ext_buffer) {
1596 usbd_copy_in(xfer->frbuffers, 0,
1597 urb->setup_packet, REQ_SIZE);
1598 usbd_xfer_set_frame_len(xfer, 0, REQ_SIZE);
1599 } else {
1600 /* set virtual address to load */
1601 usbd_xfer_set_frame_data(xfer, 0,
1602 urb->setup_packet, REQ_SIZE);
1603 }
1604
1605 ptr = urb->setup_packet;
1606
1607 /* setup data transfer direction and length */
1608 urb->bsd_isread = (ptr[0] & UT_READ) ? 1 : 0;
1609 urb->bsd_length_rem = ptr[6] | (ptr[7] << 8);
1610
1611 } else {
1612
1613 /* setup data transfer direction */
1614
1615 urb->bsd_length_rem = urb->transfer_buffer_length;
1616 urb->bsd_isread = (uhe->desc.bEndpointAddress &
1617 UE_DIR_IN) ? 1 : 0;
1618 }
1619
1620 urb->bsd_data_ptr = urb->transfer_buffer;
1621 urb->actual_length = 0;
1622
1623setup_bulk:
1624 if (max_bulk > urb->bsd_length_rem) {
1625 max_bulk = urb->bsd_length_rem;
1626 }
1627 /* check if we need to force a short transfer */
1628
1629 if ((max_bulk == urb->bsd_length_rem) &&
1630 (urb->transfer_flags & URB_ZERO_PACKET) &&
1631 (!xfer->flags_int.control_xfr)) {
1632 xfer->flags.force_short_xfer = 1;
1633 }
1634 /* check if we need to copy in data */
1635
1636 if (xfer->flags.ext_buffer) {
1637 /* set virtual address to load */
1638 usbd_xfer_set_frame_data(xfer, data_frame,
1639 urb->bsd_data_ptr, max_bulk);
1640 } else if (!urb->bsd_isread) {
1641 /* copy out data with regard to the URB */
1642 usbd_copy_in(xfer->frbuffers + data_frame, 0,
1643 urb->bsd_data_ptr, max_bulk);
1644 usbd_xfer_set_frame_len(xfer, data_frame, max_bulk);
1645 }
1646 if (xfer->flags_int.control_xfr) {
1647 if (max_bulk > 0) {
1648 xfer->nframes = 2;
1649 } else {
1650 xfer->nframes = 1;
1651 }
1652 } else {
1653 xfer->nframes = 1;
1654 }
1655 usbd_transfer_submit(xfer);
1656 return;
1657
1658 default:
1659 if (xfer->error == USB_ERR_CANCELLED) {
1660 urb->status = -ECONNRESET;
1661 } else {
1662 urb->status = -EPIPE;
1663 }
1664
1665 /* Set zero for "actual_length" */
1666 urb->actual_length = 0;
1667
1668 /* call callback */
1669 usb_linux_complete(xfer);
1670
1671 if (xfer->error == USB_ERR_CANCELLED) {
1672 /* we need to return in this case */
1673 return;
1674 }
1675 goto tr_setup;
1676 }
1677}
1678
1679/*------------------------------------------------------------------------*
1680 * usb_fill_bulk_urb
1681 *------------------------------------------------------------------------*/
1682void
1683usb_fill_bulk_urb(struct urb *urb, struct usb_device *udev,
1684 struct usb_host_endpoint *uhe, void *buf,
1685 int length, usb_complete_t callback, void *arg)
1686{
1687 urb->dev = udev;
1688 urb->endpoint = uhe;
1689 urb->transfer_buffer = buf;
1690 urb->transfer_buffer_length = length;
1691 urb->complete = callback;
1692 urb->context = arg;
1693}
1694
1695/*------------------------------------------------------------------------*
1696 * usb_bulk_msg
1697 *
1698 * NOTE: This function can also be used for interrupt endpoints!
1699 *
1700 * Return values:
1701 * 0: Success
1702 * Else: Failure
1703 *------------------------------------------------------------------------*/
1704int
1705usb_bulk_msg(struct usb_device *udev, struct usb_host_endpoint *uhe,
1706 void *data, int len, uint16_t *pactlen, usb_timeout_t timeout)
1707{
1708 struct urb *urb;
1709 int err;
1710
1711 if (uhe == NULL)
1712 return (-EINVAL);
1713 if (len < 0)
1714 return (-EINVAL);
1715
1716 err = usb_setup_endpoint(udev, uhe, 4096 /* bytes */);
1717 if (err)
1718 return (err);
1719
1720 urb = usb_alloc_urb(0, 0);
1721 if (urb == NULL)
1722 return (-ENOMEM);
1723
1724 usb_fill_bulk_urb(urb, udev, uhe, data, len,
1725 usb_linux_wait_complete, NULL);
1726
1727 err = usb_start_wait_urb(urb, timeout, pactlen);
1728
1729 usb_free_urb(urb);
1730
1731 return (err);
1732}
| 126
127/*------------------------------------------------------------------------*
128 * usb_linux_lookup_id
129 *
130 * This functions takes an array of "struct usb_device_id" and tries
131 * to match the entries with the information in "struct usb_attach_arg".
132 * If it finds a match the matching entry will be returned.
133 * Else "NULL" will be returned.
134 *------------------------------------------------------------------------*/
135static const struct usb_device_id *
136usb_linux_lookup_id(const struct usb_device_id *id, struct usb_attach_arg *uaa)
137{
138 if (id == NULL) {
139 goto done;
140 }
141 /*
142 * Keep on matching array entries until we find one with
143 * "match_flags" equal to zero, which indicates the end of the
144 * array:
145 */
146 for (; id->match_flags; id++) {
147
148 if ((id->match_flags & USB_DEVICE_ID_MATCH_VENDOR) &&
149 (id->idVendor != uaa->info.idVendor)) {
150 continue;
151 }
152 if ((id->match_flags & USB_DEVICE_ID_MATCH_PRODUCT) &&
153 (id->idProduct != uaa->info.idProduct)) {
154 continue;
155 }
156 if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_LO) &&
157 (id->bcdDevice_lo > uaa->info.bcdDevice)) {
158 continue;
159 }
160 if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_HI) &&
161 (id->bcdDevice_hi < uaa->info.bcdDevice)) {
162 continue;
163 }
164 if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_CLASS) &&
165 (id->bDeviceClass != uaa->info.bDeviceClass)) {
166 continue;
167 }
168 if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_SUBCLASS) &&
169 (id->bDeviceSubClass != uaa->info.bDeviceSubClass)) {
170 continue;
171 }
172 if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_PROTOCOL) &&
173 (id->bDeviceProtocol != uaa->info.bDeviceProtocol)) {
174 continue;
175 }
176 if ((uaa->info.bDeviceClass == 0xFF) &&
177 !(id->match_flags & USB_DEVICE_ID_MATCH_VENDOR) &&
178 (id->match_flags & (USB_DEVICE_ID_MATCH_INT_CLASS |
179 USB_DEVICE_ID_MATCH_INT_SUBCLASS |
180 USB_DEVICE_ID_MATCH_INT_PROTOCOL))) {
181 continue;
182 }
183 if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_CLASS) &&
184 (id->bInterfaceClass != uaa->info.bInterfaceClass)) {
185 continue;
186 }
187 if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_SUBCLASS) &&
188 (id->bInterfaceSubClass != uaa->info.bInterfaceSubClass)) {
189 continue;
190 }
191 if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_PROTOCOL) &&
192 (id->bInterfaceProtocol != uaa->info.bInterfaceProtocol)) {
193 continue;
194 }
195 /* we found a match! */
196 return (id);
197 }
198
199done:
200 return (NULL);
201}
202
203/*------------------------------------------------------------------------*
204 * usb_linux_probe
205 *
206 * This function is the FreeBSD probe callback. It is called from the
207 * FreeBSD USB stack through the "device_probe_and_attach()" function.
208 *------------------------------------------------------------------------*/
209static int
210usb_linux_probe(device_t dev)
211{
212 struct usb_attach_arg *uaa = device_get_ivars(dev);
213 struct usb_driver *udrv;
214 int err = ENXIO;
215
216 if (uaa->usb_mode != USB_MODE_HOST) {
217 return (ENXIO);
218 }
219 mtx_lock(&Giant);
220 LIST_FOREACH(udrv, &usb_linux_driver_list, linux_driver_list) {
221 if (usb_linux_lookup_id(udrv->id_table, uaa)) {
222 err = 0;
223 break;
224 }
225 }
226 mtx_unlock(&Giant);
227
228 return (err);
229}
230
231/*------------------------------------------------------------------------*
232 * usb_linux_get_usb_driver
233 *
234 * This function returns the pointer to the "struct usb_driver" where
235 * the Linux USB device driver "struct usb_device_id" match was found.
236 * We apply a lock before reading out the pointer to avoid races.
237 *------------------------------------------------------------------------*/
238static struct usb_driver *
239usb_linux_get_usb_driver(struct usb_linux_softc *sc)
240{
241 struct usb_driver *udrv;
242
243 mtx_lock(&Giant);
244 udrv = sc->sc_udrv;
245 mtx_unlock(&Giant);
246 return (udrv);
247}
248
249/*------------------------------------------------------------------------*
250 * usb_linux_attach
251 *
252 * This function is the FreeBSD attach callback. It is called from the
253 * FreeBSD USB stack through the "device_probe_and_attach()" function.
254 * This function is called when "usb_linux_probe()" returns zero.
255 *------------------------------------------------------------------------*/
256static int
257usb_linux_attach(device_t dev)
258{
259 struct usb_attach_arg *uaa = device_get_ivars(dev);
260 struct usb_linux_softc *sc = device_get_softc(dev);
261 struct usb_driver *udrv;
262 const struct usb_device_id *id = NULL;
263
264 mtx_lock(&Giant);
265 LIST_FOREACH(udrv, &usb_linux_driver_list, linux_driver_list) {
266 id = usb_linux_lookup_id(udrv->id_table, uaa);
267 if (id)
268 break;
269 }
270 mtx_unlock(&Giant);
271
272 if (id == NULL) {
273 return (ENXIO);
274 }
275 if (usb_linux_create_usb_device(uaa->device, dev) != 0)
276 return (ENOMEM);
277 device_set_usb_desc(dev);
278
279 sc->sc_fbsd_udev = uaa->device;
280 sc->sc_fbsd_dev = dev;
281 sc->sc_udrv = udrv;
282 sc->sc_ui = usb_ifnum_to_if(uaa->device, uaa->info.bIfaceNum);
283 if (sc->sc_ui == NULL) {
284 return (EINVAL);
285 }
286 if (udrv->probe) {
287 if ((udrv->probe) (sc->sc_ui, id)) {
288 return (ENXIO);
289 }
290 }
291 mtx_lock(&Giant);
292 LIST_INSERT_HEAD(&usb_linux_attached_list, sc, sc_attached_list);
293 mtx_unlock(&Giant);
294
295 /* success */
296 return (0);
297}
298
299/*------------------------------------------------------------------------*
300 * usb_linux_detach
301 *
302 * This function is the FreeBSD detach callback. It is called from the
303 * FreeBSD USB stack through the "device_detach()" function.
304 *------------------------------------------------------------------------*/
305static int
306usb_linux_detach(device_t dev)
307{
308 struct usb_linux_softc *sc = device_get_softc(dev);
309 struct usb_driver *udrv = NULL;
310
311 mtx_lock(&Giant);
312 if (sc->sc_attached_list.le_prev) {
313 LIST_REMOVE(sc, sc_attached_list);
314 sc->sc_attached_list.le_prev = NULL;
315 udrv = sc->sc_udrv;
316 sc->sc_udrv = NULL;
317 }
318 mtx_unlock(&Giant);
319
320 if (udrv && udrv->disconnect) {
321 (udrv->disconnect) (sc->sc_ui);
322 }
323 /*
324 * Make sure that we free all FreeBSD USB transfers belonging to
325 * this Linux "usb_interface", hence they will most likely not be
326 * needed any more.
327 */
328 usb_linux_cleanup_interface(sc->sc_fbsd_udev, sc->sc_ui);
329 return (0);
330}
331
332/*------------------------------------------------------------------------*
333 * usb_linux_suspend
334 *
335 * This function is the FreeBSD suspend callback. Usually it does nothing.
336 *------------------------------------------------------------------------*/
337static int
338usb_linux_suspend(device_t dev)
339{
340 struct usb_linux_softc *sc = device_get_softc(dev);
341 struct usb_driver *udrv = usb_linux_get_usb_driver(sc);
342 int err;
343
344 if (udrv && udrv->suspend) {
345 err = (udrv->suspend) (sc->sc_ui, 0);
346 }
347 return (0);
348}
349
350/*------------------------------------------------------------------------*
351 * usb_linux_resume
352 *
353 * This function is the FreeBSD resume callback. Usually it does nothing.
354 *------------------------------------------------------------------------*/
355static int
356usb_linux_resume(device_t dev)
357{
358 struct usb_linux_softc *sc = device_get_softc(dev);
359 struct usb_driver *udrv = usb_linux_get_usb_driver(sc);
360 int err;
361
362 if (udrv && udrv->resume) {
363 err = (udrv->resume) (sc->sc_ui);
364 }
365 return (0);
366}
367
368/*------------------------------------------------------------------------*
369 * Linux emulation layer
370 *------------------------------------------------------------------------*/
371
372/*------------------------------------------------------------------------*
373 * usb_max_isoc_frames
374 *
375 * The following function returns the maximum number of isochronous
376 * frames that we support per URB. It is not part of the Linux USB API.
377 *------------------------------------------------------------------------*/
378static uint16_t
379usb_max_isoc_frames(struct usb_device *dev)
380{
381 ; /* indent fix */
382 switch (usbd_get_speed(dev)) {
383 case USB_SPEED_LOW:
384 case USB_SPEED_FULL:
385 return (USB_MAX_FULL_SPEED_ISOC_FRAMES);
386 default:
387 return (USB_MAX_HIGH_SPEED_ISOC_FRAMES);
388 }
389}
390
391/*------------------------------------------------------------------------*
392 * usb_submit_urb
393 *
394 * This function is used to queue an URB after that it has been
395 * initialized. If it returns non-zero, it means that the URB was not
396 * queued.
397 *------------------------------------------------------------------------*/
398int
399usb_submit_urb(struct urb *urb, uint16_t mem_flags)
400{
401 struct usb_host_endpoint *uhe;
402 uint8_t do_unlock;
403 int err;
404
405 if (urb == NULL)
406 return (-EINVAL);
407
408 do_unlock = mtx_owned(&Giant) ? 0 : 1;
409 if (do_unlock)
410 mtx_lock(&Giant);
411
412 if (urb->endpoint == NULL) {
413 err = -EINVAL;
414 goto done;
415 }
416
417 /*
418 * Check to see if the urb is in the process of being killed
419 * and stop a urb that is in the process of being killed from
420 * being re-submitted (e.g. from its completion callback
421 * function).
422 */
423 if (urb->kill_count != 0) {
424 err = -EPERM;
425 goto done;
426 }
427
428 uhe = urb->endpoint;
429
430 /*
431 * Check that we have got a FreeBSD USB transfer that will dequeue
432 * the URB structure and do the real transfer. If there are no USB
433 * transfers, then we return an error.
434 */
435 if (uhe->bsd_xfer[0] ||
436 uhe->bsd_xfer[1]) {
437 /* we are ready! */
438
439 TAILQ_INSERT_TAIL(&uhe->bsd_urb_list, urb, bsd_urb_list);
440
441 urb->status = -EINPROGRESS;
442
443 usbd_transfer_start(uhe->bsd_xfer[0]);
444 usbd_transfer_start(uhe->bsd_xfer[1]);
445 err = 0;
446 } else {
447 /* no pipes have been setup yet! */
448 urb->status = -EINVAL;
449 err = -EINVAL;
450 }
451done:
452 if (do_unlock)
453 mtx_unlock(&Giant);
454 return (err);
455}
456
457/*------------------------------------------------------------------------*
458 * usb_unlink_urb
459 *
460 * This function is used to stop an URB after that it is been
461 * submitted, but before the "complete" callback has been called. On
462 *------------------------------------------------------------------------*/
463int
464usb_unlink_urb(struct urb *urb)
465{
466 return (usb_unlink_urb_sub(urb, 0));
467}
468
469static void
470usb_unlink_bsd(struct usb_xfer *xfer,
471 struct urb *urb, uint8_t drain)
472{
473 if (xfer == NULL)
474 return;
475 if (!usbd_transfer_pending(xfer))
476 return;
477 if (xfer->priv_fifo == (void *)urb) {
478 if (drain) {
479 mtx_unlock(&Giant);
480 usbd_transfer_drain(xfer);
481 mtx_lock(&Giant);
482 } else {
483 usbd_transfer_stop(xfer);
484 }
485 usbd_transfer_start(xfer);
486 }
487}
488
489static int
490usb_unlink_urb_sub(struct urb *urb, uint8_t drain)
491{
492 struct usb_host_endpoint *uhe;
493 uint16_t x;
494 uint8_t do_unlock;
495 int err;
496
497 if (urb == NULL)
498 return (-EINVAL);
499
500 do_unlock = mtx_owned(&Giant) ? 0 : 1;
501 if (do_unlock)
502 mtx_lock(&Giant);
503 if (drain)
504 urb->kill_count++;
505
506 if (urb->endpoint == NULL) {
507 err = -EINVAL;
508 goto done;
509 }
510 uhe = urb->endpoint;
511
512 if (urb->bsd_urb_list.tqe_prev) {
513
514 /* not started yet, just remove it from the queue */
515 TAILQ_REMOVE(&uhe->bsd_urb_list, urb, bsd_urb_list);
516 urb->bsd_urb_list.tqe_prev = NULL;
517 urb->status = -ECONNRESET;
518 urb->actual_length = 0;
519
520 for (x = 0; x < urb->number_of_packets; x++) {
521 urb->iso_frame_desc[x].actual_length = 0;
522 }
523
524 if (urb->complete) {
525 (urb->complete) (urb);
526 }
527 } else {
528
529 /*
530 * If the URB is not on the URB list, then check if one of
531 * the FreeBSD USB transfer are processing the current URB.
532 * If so, re-start that transfer, which will lead to the
533 * termination of that URB:
534 */
535 usb_unlink_bsd(uhe->bsd_xfer[0], urb, drain);
536 usb_unlink_bsd(uhe->bsd_xfer[1], urb, drain);
537 }
538 err = 0;
539done:
540 if (drain)
541 urb->kill_count--;
542 if (do_unlock)
543 mtx_unlock(&Giant);
544 return (err);
545}
546
547/*------------------------------------------------------------------------*
548 * usb_clear_halt
549 *
550 * This function must always be used to clear the stall. Stall is when
551 * an USB endpoint returns a stall message to the USB host controller.
552 * Until the stall is cleared, no data can be transferred.
553 *------------------------------------------------------------------------*/
554int
555usb_clear_halt(struct usb_device *dev, struct usb_host_endpoint *uhe)
556{
557 struct usb_config cfg[1];
558 struct usb_endpoint *ep;
559 uint8_t type;
560 uint8_t addr;
561
562 if (uhe == NULL)
563 return (-EINVAL);
564
565 type = uhe->desc.bmAttributes & UE_XFERTYPE;
566 addr = uhe->desc.bEndpointAddress;
567
568 bzero(cfg, sizeof(cfg));
569
570 cfg[0].type = type;
571 cfg[0].endpoint = addr & UE_ADDR;
572 cfg[0].direction = addr & (UE_DIR_OUT | UE_DIR_IN);
573
574 ep = usbd_get_endpoint(dev, uhe->bsd_iface_index, cfg);
575 if (ep == NULL)
576 return (-EINVAL);
577
578 usbd_clear_data_toggle(dev, ep);
579
580 return (usb_control_msg(dev, &dev->ep0,
581 UR_CLEAR_FEATURE, UT_WRITE_ENDPOINT,
582 UF_ENDPOINT_HALT, addr, NULL, 0, 1000));
583}
584
585/*------------------------------------------------------------------------*
586 * usb_start_wait_urb
587 *
588 * This is an internal function that is used to perform synchronous
589 * Linux USB transfers.
590 *------------------------------------------------------------------------*/
591static int
592usb_start_wait_urb(struct urb *urb, usb_timeout_t timeout, uint16_t *p_actlen)
593{
594 int err;
595 uint8_t do_unlock;
596
597 /* you must have a timeout! */
598 if (timeout == 0) {
599 timeout = 1;
600 }
601 urb->complete = &usb_linux_wait_complete;
602 urb->timeout = timeout;
603 urb->transfer_flags |= URB_WAIT_WAKEUP;
604 urb->transfer_flags &= ~URB_IS_SLEEPING;
605
606 do_unlock = mtx_owned(&Giant) ? 0 : 1;
607 if (do_unlock)
608 mtx_lock(&Giant);
609 err = usb_submit_urb(urb, 0);
610 if (err)
611 goto done;
612
613 /*
614 * the URB might have completed before we get here, so check that by
615 * using some flags!
616 */
617 while (urb->transfer_flags & URB_WAIT_WAKEUP) {
618 urb->transfer_flags |= URB_IS_SLEEPING;
619 cv_wait(&urb->cv_wait, &Giant);
620 urb->transfer_flags &= ~URB_IS_SLEEPING;
621 }
622
623 err = urb->status;
624
625done:
626 if (do_unlock)
627 mtx_unlock(&Giant);
628 if (p_actlen != NULL) {
629 if (err)
630 *p_actlen = 0;
631 else
632 *p_actlen = urb->actual_length;
633 }
634 return (err);
635}
636
637/*------------------------------------------------------------------------*
638 * usb_control_msg
639 *
640 * The following function performs a control transfer sequence one any
641 * control, bulk or interrupt endpoint, specified by "uhe". A control
642 * transfer means that you transfer an 8-byte header first followed by
643 * a data-phase as indicated by the 8-byte header. The "timeout" is
644 * given in milliseconds.
645 *
646 * Return values:
647 * 0: Success
648 * < 0: Failure
649 * > 0: Acutal length
650 *------------------------------------------------------------------------*/
651int
652usb_control_msg(struct usb_device *dev, struct usb_host_endpoint *uhe,
653 uint8_t request, uint8_t requesttype,
654 uint16_t value, uint16_t index, void *data,
655 uint16_t size, usb_timeout_t timeout)
656{
657 struct usb_device_request req;
658 struct urb *urb;
659 int err;
660 uint16_t actlen;
661 uint8_t type;
662 uint8_t addr;
663
664 req.bmRequestType = requesttype;
665 req.bRequest = request;
666 USETW(req.wValue, value);
667 USETW(req.wIndex, index);
668 USETW(req.wLength, size);
669
670 if (uhe == NULL) {
671 return (-EINVAL);
672 }
673 type = (uhe->desc.bmAttributes & UE_XFERTYPE);
674 addr = (uhe->desc.bEndpointAddress & UE_ADDR);
675
676 if (type != UE_CONTROL) {
677 return (-EINVAL);
678 }
679 if (addr == 0) {
680 /*
681 * The FreeBSD USB stack supports standard control
682 * transfers on control endpoint zero:
683 */
684 err = usbd_do_request_flags(dev,
685 NULL, &req, data, USB_SHORT_XFER_OK,
686 &actlen, timeout);
687 if (err) {
688 err = -EPIPE;
689 } else {
690 err = actlen;
691 }
692 return (err);
693 }
694 if (dev->flags.usb_mode != USB_MODE_HOST) {
695 /* not supported */
696 return (-EINVAL);
697 }
698 err = usb_setup_endpoint(dev, uhe, 1 /* dummy */ );
699
700 /*
701 * NOTE: we need to allocate real memory here so that we don't
702 * transfer data to/from the stack!
703 *
704 * 0xFFFF is a FreeBSD specific magic value.
705 */
706 urb = usb_alloc_urb(0xFFFF, size);
707 if (urb == NULL)
708 return (-ENOMEM);
709
710 urb->dev = dev;
711 urb->endpoint = uhe;
712
713 bcopy(&req, urb->setup_packet, sizeof(req));
714
715 if (size && (!(req.bmRequestType & UT_READ))) {
716 /* move the data to a real buffer */
717 bcopy(data, USB_ADD_BYTES(urb->setup_packet,
718 sizeof(req)), size);
719 }
720 err = usb_start_wait_urb(urb, timeout, &actlen);
721
722 if (req.bmRequestType & UT_READ) {
723 if (actlen) {
724 bcopy(USB_ADD_BYTES(urb->setup_packet,
725 sizeof(req)), data, actlen);
726 }
727 }
728 usb_free_urb(urb);
729
730 if (err == 0) {
731 err = actlen;
732 }
733 return (err);
734}
735
736/*------------------------------------------------------------------------*
737 * usb_set_interface
738 *
739 * The following function will select which alternate setting of an
740 * USB interface you plan to use. By default alternate setting with
741 * index zero is selected. Note that "iface_no" is not the interface
742 * index, but rather the value of "bInterfaceNumber".
743 *------------------------------------------------------------------------*/
744int
745usb_set_interface(struct usb_device *dev, uint8_t iface_no, uint8_t alt_index)
746{
747 struct usb_interface *p_ui = usb_ifnum_to_if(dev, iface_no);
748 int err;
749
750 if (p_ui == NULL)
751 return (-EINVAL);
752 if (alt_index >= p_ui->num_altsetting)
753 return (-EINVAL);
754 usb_linux_cleanup_interface(dev, p_ui);
755 err = -usbd_set_alt_interface_index(dev,
756 p_ui->bsd_iface_index, alt_index);
757 if (err == 0) {
758 p_ui->cur_altsetting = p_ui->altsetting + alt_index;
759 }
760 return (err);
761}
762
763/*------------------------------------------------------------------------*
764 * usb_setup_endpoint
765 *
766 * The following function is an extension to the Linux USB API that
767 * allows you to set a maximum buffer size for a given USB endpoint.
768 * The maximum buffer size is per URB. If you don't call this function
769 * to set a maximum buffer size, the endpoint will not be functional.
770 * Note that for isochronous endpoints the maximum buffer size must be
771 * a non-zero dummy, hence this function will base the maximum buffer
772 * size on "wMaxPacketSize".
773 *------------------------------------------------------------------------*/
774int
775usb_setup_endpoint(struct usb_device *dev,
776 struct usb_host_endpoint *uhe, usb_size_t bufsize)
777{
778 struct usb_config cfg[2];
779 uint8_t type = uhe->desc.bmAttributes & UE_XFERTYPE;
780 uint8_t addr = uhe->desc.bEndpointAddress;
781
782 if (uhe->fbsd_buf_size == bufsize) {
783 /* optimize */
784 return (0);
785 }
786 usbd_transfer_unsetup(uhe->bsd_xfer, 2);
787
788 uhe->fbsd_buf_size = bufsize;
789
790 if (bufsize == 0) {
791 return (0);
792 }
793 bzero(cfg, sizeof(cfg));
794
795 if (type == UE_ISOCHRONOUS) {
796
797 /*
798 * Isochronous transfers are special in that they don't fit
799 * into the BULK/INTR/CONTROL transfer model.
800 */
801
802 cfg[0].type = type;
803 cfg[0].endpoint = addr & UE_ADDR;
804 cfg[0].direction = addr & (UE_DIR_OUT | UE_DIR_IN);
805 cfg[0].callback = &usb_linux_isoc_callback;
806 cfg[0].bufsize = 0; /* use wMaxPacketSize */
807 cfg[0].frames = usb_max_isoc_frames(dev);
808 cfg[0].flags.proxy_buffer = 1;
809#if 0
810 /*
811 * The Linux USB API allows non back-to-back
812 * isochronous frames which we do not support. If the
813 * isochronous frames are not back-to-back we need to
814 * do a copy, and then we need a buffer for
815 * that. Enable this at your own risk.
816 */
817 cfg[0].flags.ext_buffer = 1;
818#endif
819 cfg[0].flags.short_xfer_ok = 1;
820
821 bcopy(cfg, cfg + 1, sizeof(*cfg));
822
823 /* Allocate and setup two generic FreeBSD USB transfers */
824
825 if (usbd_transfer_setup(dev, &uhe->bsd_iface_index,
826 uhe->bsd_xfer, cfg, 2, uhe, &Giant)) {
827 return (-EINVAL);
828 }
829 } else {
830 if (bufsize > (1 << 22)) {
831 /* limit buffer size */
832 bufsize = (1 << 22);
833 }
834 /* Allocate and setup one generic FreeBSD USB transfer */
835
836 cfg[0].type = type;
837 cfg[0].endpoint = addr & UE_ADDR;
838 cfg[0].direction = addr & (UE_DIR_OUT | UE_DIR_IN);
839 cfg[0].callback = &usb_linux_non_isoc_callback;
840 cfg[0].bufsize = bufsize;
841 cfg[0].flags.ext_buffer = 1; /* enable zero-copy */
842 cfg[0].flags.proxy_buffer = 1;
843 cfg[0].flags.short_xfer_ok = 1;
844
845 if (usbd_transfer_setup(dev, &uhe->bsd_iface_index,
846 uhe->bsd_xfer, cfg, 1, uhe, &Giant)) {
847 return (-EINVAL);
848 }
849 }
850 return (0);
851}
852
853/*------------------------------------------------------------------------*
854 * usb_linux_create_usb_device
855 *
856 * The following function is used to build up a per USB device
857 * structure tree, that mimics the Linux one. The root structure
858 * is returned by this function.
859 *------------------------------------------------------------------------*/
860static int
861usb_linux_create_usb_device(struct usb_device *udev, device_t dev)
862{
863 struct usb_config_descriptor *cd = usbd_get_config_descriptor(udev);
864 struct usb_descriptor *desc;
865 struct usb_interface_descriptor *id;
866 struct usb_endpoint_descriptor *ed;
867 struct usb_interface *p_ui = NULL;
868 struct usb_host_interface *p_uhi = NULL;
869 struct usb_host_endpoint *p_uhe = NULL;
870 usb_size_t size;
871 uint16_t niface_total;
872 uint16_t nedesc;
873 uint16_t iface_no_curr;
874 uint16_t iface_index;
875 uint8_t pass;
876 uint8_t iface_no;
877
878 /*
879 * We do two passes. One pass for computing necessary memory size
880 * and one pass to initialize all the allocated memory structures.
881 */
882 for (pass = 0; pass < 2; pass++) {
883
884 iface_no_curr = 0 - 1;
885 niface_total = 0;
886 iface_index = 0;
887 nedesc = 0;
888 desc = NULL;
889
890 /*
891 * Iterate over all the USB descriptors. Use the USB config
892 * descriptor pointer provided by the FreeBSD USB stack.
893 */
894 while ((desc = usb_desc_foreach(cd, desc))) {
895
896 /*
897 * Build up a tree according to the descriptors we
898 * find:
899 */
900 switch (desc->bDescriptorType) {
901 case UDESC_DEVICE:
902 break;
903
904 case UDESC_ENDPOINT:
905 ed = (void *)desc;
906 if ((ed->bLength < sizeof(*ed)) ||
907 (iface_index == 0))
908 break;
909 if (p_uhe) {
910 bcopy(ed, &p_uhe->desc, sizeof(p_uhe->desc));
911 p_uhe->bsd_iface_index = iface_index - 1;
912 TAILQ_INIT(&p_uhe->bsd_urb_list);
913 p_uhe++;
914 }
915 if (p_uhi) {
916 (p_uhi - 1)->desc.bNumEndpoints++;
917 }
918 nedesc++;
919 break;
920
921 case UDESC_INTERFACE:
922 id = (void *)desc;
923 if (id->bLength < sizeof(*id))
924 break;
925 if (p_uhi) {
926 bcopy(id, &p_uhi->desc, sizeof(p_uhi->desc));
927 p_uhi->desc.bNumEndpoints = 0;
928 p_uhi->endpoint = p_uhe;
929 p_uhi->string = "";
930 p_uhi->bsd_iface_index = iface_index;
931 p_uhi++;
932 }
933 iface_no = id->bInterfaceNumber;
934 niface_total++;
935 if (iface_no_curr != iface_no) {
936 if (p_ui) {
937 p_ui->altsetting = p_uhi - 1;
938 p_ui->cur_altsetting = p_uhi - 1;
939 p_ui->num_altsetting = 1;
940 p_ui->bsd_iface_index = iface_index;
941 p_ui->linux_udev = udev;
942 p_ui++;
943 }
944 iface_no_curr = iface_no;
945 iface_index++;
946 } else {
947 if (p_ui) {
948 (p_ui - 1)->num_altsetting++;
949 }
950 }
951 break;
952
953 default:
954 break;
955 }
956 }
957
958 if (pass == 0) {
959
960 size = (sizeof(*p_uhe) * nedesc) +
961 (sizeof(*p_ui) * iface_index) +
962 (sizeof(*p_uhi) * niface_total);
963
964 p_uhe = malloc(size, M_USBDEV, M_WAITOK | M_ZERO);
965 p_ui = (void *)(p_uhe + nedesc);
966 p_uhi = (void *)(p_ui + iface_index);
967
968 udev->linux_iface_start = p_ui;
969 udev->linux_iface_end = p_ui + iface_index;
970 udev->linux_endpoint_start = p_uhe;
971 udev->linux_endpoint_end = p_uhe + nedesc;
972 udev->devnum = device_get_unit(dev);
973 bcopy(&udev->ddesc, &udev->descriptor,
974 sizeof(udev->descriptor));
975 bcopy(udev->ctrl_ep.edesc, &udev->ep0.desc,
976 sizeof(udev->ep0.desc));
977 }
978 }
979 return (0);
980}
981
982/*------------------------------------------------------------------------*
983 * usb_alloc_urb
984 *
985 * This function should always be used when you allocate an URB for
986 * use with the USB Linux stack. In case of an isochronous transfer
987 * you must specifiy the maximum number of "iso_packets" which you
988 * plan to transfer per URB. This function is always blocking, and
989 * "mem_flags" are not regarded like on Linux.
990 *------------------------------------------------------------------------*/
991struct urb *
992usb_alloc_urb(uint16_t iso_packets, uint16_t mem_flags)
993{
994 struct urb *urb;
995 usb_size_t size;
996
997 if (iso_packets == 0xFFFF) {
998 /*
999 * FreeBSD specific magic value to ask for control transfer
1000 * memory allocation:
1001 */
1002 size = sizeof(*urb) + sizeof(struct usb_device_request) + mem_flags;
1003 } else {
1004 size = sizeof(*urb) + (iso_packets * sizeof(urb->iso_frame_desc[0]));
1005 }
1006
1007 urb = malloc(size, M_USBDEV, M_WAITOK | M_ZERO);
1008 if (urb) {
1009
1010 cv_init(&urb->cv_wait, "URBWAIT");
1011 if (iso_packets == 0xFFFF) {
1012 urb->setup_packet = (void *)(urb + 1);
1013 urb->transfer_buffer = (void *)(urb->setup_packet +
1014 sizeof(struct usb_device_request));
1015 } else {
1016 urb->number_of_packets = iso_packets;
1017 }
1018 }
1019 return (urb);
1020}
1021
1022/*------------------------------------------------------------------------*
1023 * usb_find_host_endpoint
1024 *
1025 * The following function will return the Linux USB host endpoint
1026 * structure that matches the given endpoint type and endpoint
1027 * value. If no match is found, NULL is returned. This function is not
1028 * part of the Linux USB API and is only used internally.
1029 *------------------------------------------------------------------------*/
1030struct usb_host_endpoint *
1031usb_find_host_endpoint(struct usb_device *dev, uint8_t type, uint8_t ep)
1032{
1033 struct usb_host_endpoint *uhe;
1034 struct usb_host_endpoint *uhe_end;
1035 struct usb_host_interface *uhi;
1036 struct usb_interface *ui;
1037 uint8_t ea;
1038 uint8_t at;
1039 uint8_t mask;
1040
1041 if (dev == NULL) {
1042 return (NULL);
1043 }
1044 if (type == UE_CONTROL) {
1045 mask = UE_ADDR;
1046 } else {
1047 mask = (UE_DIR_IN | UE_DIR_OUT | UE_ADDR);
1048 }
1049
1050 ep &= mask;
1051
1052 /*
1053 * Iterate over all the interfaces searching the selected alternate
1054 * setting only, and all belonging endpoints.
1055 */
1056 for (ui = dev->linux_iface_start;
1057 ui != dev->linux_iface_end;
1058 ui++) {
1059 uhi = ui->cur_altsetting;
1060 if (uhi) {
1061 uhe_end = uhi->endpoint + uhi->desc.bNumEndpoints;
1062 for (uhe = uhi->endpoint;
1063 uhe != uhe_end;
1064 uhe++) {
1065 ea = uhe->desc.bEndpointAddress;
1066 at = uhe->desc.bmAttributes;
1067
1068 if (((ea & mask) == ep) &&
1069 ((at & UE_XFERTYPE) == type)) {
1070 return (uhe);
1071 }
1072 }
1073 }
1074 }
1075
1076 if ((type == UE_CONTROL) && ((ep & UE_ADDR) == 0)) {
1077 return (&dev->ep0);
1078 }
1079 return (NULL);
1080}
1081
1082/*------------------------------------------------------------------------*
1083 * usb_altnum_to_altsetting
1084 *
1085 * The following function returns a pointer to an alternate setting by
1086 * index given a "usb_interface" pointer. If the alternate setting by
1087 * index does not exist, NULL is returned. And alternate setting is a
1088 * variant of an interface, but usually with slightly different
1089 * characteristics.
1090 *------------------------------------------------------------------------*/
1091struct usb_host_interface *
1092usb_altnum_to_altsetting(const struct usb_interface *intf, uint8_t alt_index)
1093{
1094 if (alt_index >= intf->num_altsetting) {
1095 return (NULL);
1096 }
1097 return (intf->altsetting + alt_index);
1098}
1099
1100/*------------------------------------------------------------------------*
1101 * usb_ifnum_to_if
1102 *
1103 * The following function searches up an USB interface by
1104 * "bInterfaceNumber". If no match is found, NULL is returned.
1105 *------------------------------------------------------------------------*/
1106struct usb_interface *
1107usb_ifnum_to_if(struct usb_device *dev, uint8_t iface_no)
1108{
1109 struct usb_interface *p_ui;
1110
1111 for (p_ui = dev->linux_iface_start;
1112 p_ui != dev->linux_iface_end;
1113 p_ui++) {
1114 if ((p_ui->num_altsetting > 0) &&
1115 (p_ui->altsetting->desc.bInterfaceNumber == iface_no)) {
1116 return (p_ui);
1117 }
1118 }
1119 return (NULL);
1120}
1121
1122/*------------------------------------------------------------------------*
1123 * usb_buffer_alloc
1124 *------------------------------------------------------------------------*/
1125void *
1126usb_buffer_alloc(struct usb_device *dev, usb_size_t size, uint16_t mem_flags, uint8_t *dma_addr)
1127{
1128 return (malloc(size, M_USBDEV, M_WAITOK | M_ZERO));
1129}
1130
1131/*------------------------------------------------------------------------*
1132 * usbd_get_intfdata
1133 *------------------------------------------------------------------------*/
1134void *
1135usbd_get_intfdata(struct usb_interface *intf)
1136{
1137 return (intf->bsd_priv_sc);
1138}
1139
1140/*------------------------------------------------------------------------*
1141 * usb_linux_register
1142 *
1143 * The following function is used by the "USB_DRIVER_EXPORT()" macro,
1144 * and is used to register a Linux USB driver, so that its
1145 * "usb_device_id" structures gets searched a probe time. This
1146 * function is not part of the Linux USB API, and is for internal use
1147 * only.
1148 *------------------------------------------------------------------------*/
1149void
1150usb_linux_register(void *arg)
1151{
1152 struct usb_driver *drv = arg;
1153
1154 mtx_lock(&Giant);
1155 LIST_INSERT_HEAD(&usb_linux_driver_list, drv, linux_driver_list);
1156 mtx_unlock(&Giant);
1157
1158 usb_needs_explore_all();
1159}
1160
1161/*------------------------------------------------------------------------*
1162 * usb_linux_deregister
1163 *
1164 * The following function is used by the "USB_DRIVER_EXPORT()" macro,
1165 * and is used to deregister a Linux USB driver. This function will
1166 * ensure that all driver instances belonging to the Linux USB device
1167 * driver in question, gets detached before the driver is
1168 * unloaded. This function is not part of the Linux USB API, and is
1169 * for internal use only.
1170 *------------------------------------------------------------------------*/
1171void
1172usb_linux_deregister(void *arg)
1173{
1174 struct usb_driver *drv = arg;
1175 struct usb_linux_softc *sc;
1176
1177repeat:
1178 mtx_lock(&Giant);
1179 LIST_FOREACH(sc, &usb_linux_attached_list, sc_attached_list) {
1180 if (sc->sc_udrv == drv) {
1181 mtx_unlock(&Giant);
1182 device_detach(sc->sc_fbsd_dev);
1183 goto repeat;
1184 }
1185 }
1186 LIST_REMOVE(drv, linux_driver_list);
1187 mtx_unlock(&Giant);
1188}
1189
1190/*------------------------------------------------------------------------*
1191 * usb_linux_free_device
1192 *
1193 * The following function is only used by the FreeBSD USB stack, to
1194 * cleanup and free memory after that a Linux USB device was attached.
1195 *------------------------------------------------------------------------*/
1196void
1197usb_linux_free_device(struct usb_device *dev)
1198{
1199 struct usb_host_endpoint *uhe;
1200 struct usb_host_endpoint *uhe_end;
1201 int err;
1202
1203 uhe = dev->linux_endpoint_start;
1204 uhe_end = dev->linux_endpoint_end;
1205 while (uhe != uhe_end) {
1206 err = usb_setup_endpoint(dev, uhe, 0);
1207 uhe++;
1208 }
1209 err = usb_setup_endpoint(dev, &dev->ep0, 0);
1210 free(dev->linux_endpoint_start, M_USBDEV);
1211}
1212
1213/*------------------------------------------------------------------------*
1214 * usb_buffer_free
1215 *------------------------------------------------------------------------*/
1216void
1217usb_buffer_free(struct usb_device *dev, usb_size_t size,
1218 void *addr, uint8_t dma_addr)
1219{
1220 free(addr, M_USBDEV);
1221}
1222
1223/*------------------------------------------------------------------------*
1224 * usb_free_urb
1225 *------------------------------------------------------------------------*/
1226void
1227usb_free_urb(struct urb *urb)
1228{
1229 if (urb == NULL) {
1230 return;
1231 }
1232 /* make sure that the current URB is not active */
1233 usb_kill_urb(urb);
1234
1235 /* destroy condition variable */
1236 cv_destroy(&urb->cv_wait);
1237
1238 /* just free it */
1239 free(urb, M_USBDEV);
1240}
1241
1242/*------------------------------------------------------------------------*
1243 * usb_init_urb
1244 *
1245 * The following function can be used to initialize a custom URB. It
1246 * is not recommended to use this function. Use "usb_alloc_urb()"
1247 * instead.
1248 *------------------------------------------------------------------------*/
1249void
1250usb_init_urb(struct urb *urb)
1251{
1252 if (urb == NULL) {
1253 return;
1254 }
1255 bzero(urb, sizeof(*urb));
1256}
1257
1258/*------------------------------------------------------------------------*
1259 * usb_kill_urb
1260 *------------------------------------------------------------------------*/
1261void
1262usb_kill_urb(struct urb *urb)
1263{
1264 usb_unlink_urb_sub(urb, 1);
1265}
1266
1267/*------------------------------------------------------------------------*
1268 * usb_set_intfdata
1269 *
1270 * The following function sets the per Linux USB interface private
1271 * data pointer. It is used by most Linux USB device drivers.
1272 *------------------------------------------------------------------------*/
1273void
1274usb_set_intfdata(struct usb_interface *intf, void *data)
1275{
1276 intf->bsd_priv_sc = data;
1277}
1278
1279/*------------------------------------------------------------------------*
1280 * usb_linux_cleanup_interface
1281 *
1282 * The following function will release all FreeBSD USB transfers
1283 * associated with a Linux USB interface. It is for internal use only.
1284 *------------------------------------------------------------------------*/
1285static void
1286usb_linux_cleanup_interface(struct usb_device *dev, struct usb_interface *iface)
1287{
1288 struct usb_host_interface *uhi;
1289 struct usb_host_interface *uhi_end;
1290 struct usb_host_endpoint *uhe;
1291 struct usb_host_endpoint *uhe_end;
1292 int err;
1293
1294 uhi = iface->altsetting;
1295 uhi_end = iface->altsetting + iface->num_altsetting;
1296 while (uhi != uhi_end) {
1297 uhe = uhi->endpoint;
1298 uhe_end = uhi->endpoint + uhi->desc.bNumEndpoints;
1299 while (uhe != uhe_end) {
1300 err = usb_setup_endpoint(dev, uhe, 0);
1301 uhe++;
1302 }
1303 uhi++;
1304 }
1305}
1306
1307/*------------------------------------------------------------------------*
1308 * usb_linux_wait_complete
1309 *
1310 * The following function is used by "usb_start_wait_urb()" to wake it
1311 * up, when an USB transfer has finished.
1312 *------------------------------------------------------------------------*/
1313static void
1314usb_linux_wait_complete(struct urb *urb)
1315{
1316 if (urb->transfer_flags & URB_IS_SLEEPING) {
1317 cv_signal(&urb->cv_wait);
1318 }
1319 urb->transfer_flags &= ~URB_WAIT_WAKEUP;
1320}
1321
1322/*------------------------------------------------------------------------*
1323 * usb_linux_complete
1324 *------------------------------------------------------------------------*/
1325static void
1326usb_linux_complete(struct usb_xfer *xfer)
1327{
1328 struct urb *urb;
1329
1330 urb = usbd_xfer_get_priv(xfer);
1331 usbd_xfer_set_priv(xfer, NULL);
1332 if (urb->complete) {
1333 (urb->complete) (urb);
1334 }
1335}
1336
1337/*------------------------------------------------------------------------*
1338 * usb_linux_isoc_callback
1339 *
1340 * The following is the FreeBSD isochronous USB callback. Isochronous
1341 * frames are USB packets transferred 1000 or 8000 times per second,
1342 * depending on whether a full- or high- speed USB transfer is
1343 * used.
1344 *------------------------------------------------------------------------*/
1345static void
1346usb_linux_isoc_callback(struct usb_xfer *xfer, usb_error_t error)
1347{
1348 usb_frlength_t max_frame = xfer->max_frame_size;
1349 usb_frlength_t offset;
1350 usb_frcount_t x;
1351 struct urb *urb = usbd_xfer_get_priv(xfer);
1352 struct usb_host_endpoint *uhe = usbd_xfer_softc(xfer);
1353 struct usb_iso_packet_descriptor *uipd;
1354
1355 DPRINTF("\n");
1356
1357 switch (USB_GET_STATE(xfer)) {
1358 case USB_ST_TRANSFERRED:
1359
1360 if (urb->bsd_isread) {
1361
1362 /* copy in data with regard to the URB */
1363
1364 offset = 0;
1365
1366 for (x = 0; x < urb->number_of_packets; x++) {
1367 uipd = urb->iso_frame_desc + x;
1368 if (uipd->length > xfer->frlengths[x]) {
1369 if (urb->transfer_flags & URB_SHORT_NOT_OK) {
1370 /* XXX should be EREMOTEIO */
1371 uipd->status = -EPIPE;
1372 } else {
1373 uipd->status = 0;
1374 }
1375 } else {
1376 uipd->status = 0;
1377 }
1378 uipd->actual_length = xfer->frlengths[x];
1379 if (!xfer->flags.ext_buffer) {
1380 usbd_copy_out(xfer->frbuffers, offset,
1381 USB_ADD_BYTES(urb->transfer_buffer,
1382 uipd->offset), uipd->actual_length);
1383 }
1384 offset += max_frame;
1385 }
1386 } else {
1387 for (x = 0; x < urb->number_of_packets; x++) {
1388 uipd = urb->iso_frame_desc + x;
1389 uipd->actual_length = xfer->frlengths[x];
1390 uipd->status = 0;
1391 }
1392 }
1393
1394 urb->actual_length = xfer->actlen;
1395
1396 /* check for short transfer */
1397 if (xfer->actlen < xfer->sumlen) {
1398 /* short transfer */
1399 if (urb->transfer_flags & URB_SHORT_NOT_OK) {
1400 /* XXX should be EREMOTEIO */
1401 urb->status = -EPIPE;
1402 } else {
1403 urb->status = 0;
1404 }
1405 } else {
1406 /* success */
1407 urb->status = 0;
1408 }
1409
1410 /* call callback */
1411 usb_linux_complete(xfer);
1412
1413 case USB_ST_SETUP:
1414tr_setup:
1415
1416 if (xfer->priv_fifo == NULL) {
1417
1418 /* get next transfer */
1419 urb = TAILQ_FIRST(&uhe->bsd_urb_list);
1420 if (urb == NULL) {
1421 /* nothing to do */
1422 return;
1423 }
1424 TAILQ_REMOVE(&uhe->bsd_urb_list, urb, bsd_urb_list);
1425 urb->bsd_urb_list.tqe_prev = NULL;
1426
1427 x = xfer->max_frame_count;
1428 if (urb->number_of_packets > x) {
1429 /* XXX simply truncate the transfer */
1430 urb->number_of_packets = x;
1431 }
1432 } else {
1433 DPRINTF("Already got a transfer\n");
1434
1435 /* already got a transfer (should not happen) */
1436 urb = usbd_xfer_get_priv(xfer);
1437 }
1438
1439 urb->bsd_isread = (uhe->desc.bEndpointAddress & UE_DIR_IN) ? 1 : 0;
1440
1441 if (xfer->flags.ext_buffer) {
1442 /* set virtual address to load */
1443 usbd_xfer_set_frame_data(xfer, 0, urb->transfer_buffer, 0);
1444 }
1445 if (!(urb->bsd_isread)) {
1446
1447 /* copy out data with regard to the URB */
1448
1449 offset = 0;
1450
1451 for (x = 0; x < urb->number_of_packets; x++) {
1452 uipd = urb->iso_frame_desc + x;
1453 usbd_xfer_set_frame_len(xfer, x, uipd->length);
1454 if (!xfer->flags.ext_buffer) {
1455 usbd_copy_in(xfer->frbuffers, offset,
1456 USB_ADD_BYTES(urb->transfer_buffer,
1457 uipd->offset), uipd->length);
1458 }
1459 offset += uipd->length;
1460 }
1461 } else {
1462
1463 /*
1464 * compute the transfer length into the "offset"
1465 * variable
1466 */
1467
1468 offset = urb->number_of_packets * max_frame;
1469
1470 /* setup "frlengths" array */
1471
1472 for (x = 0; x < urb->number_of_packets; x++) {
1473 uipd = urb->iso_frame_desc + x;
1474 usbd_xfer_set_frame_len(xfer, x, max_frame);
1475 }
1476 }
1477 usbd_xfer_set_priv(xfer, urb);
1478 xfer->flags.force_short_xfer = 0;
1479 xfer->timeout = urb->timeout;
1480 xfer->nframes = urb->number_of_packets;
1481 usbd_transfer_submit(xfer);
1482 return;
1483
1484 default: /* Error */
1485 if (xfer->error == USB_ERR_CANCELLED) {
1486 urb->status = -ECONNRESET;
1487 } else {
1488 urb->status = -EPIPE; /* stalled */
1489 }
1490
1491 /* Set zero for "actual_length" */
1492 urb->actual_length = 0;
1493
1494 /* Set zero for "actual_length" */
1495 for (x = 0; x < urb->number_of_packets; x++) {
1496 urb->iso_frame_desc[x].actual_length = 0;
1497 urb->iso_frame_desc[x].status = urb->status;
1498 }
1499
1500 /* call callback */
1501 usb_linux_complete(xfer);
1502
1503 if (xfer->error == USB_ERR_CANCELLED) {
1504 /* we need to return in this case */
1505 return;
1506 }
1507 goto tr_setup;
1508
1509 }
1510}
1511
1512/*------------------------------------------------------------------------*
1513 * usb_linux_non_isoc_callback
1514 *
1515 * The following is the FreeBSD BULK/INTERRUPT and CONTROL USB
1516 * callback. It dequeues Linux USB stack compatible URB's, transforms
1517 * the URB fields into a FreeBSD USB transfer, and defragments the USB
1518 * transfer as required. When the transfer is complete the "complete"
1519 * callback is called.
1520 *------------------------------------------------------------------------*/
1521static void
1522usb_linux_non_isoc_callback(struct usb_xfer *xfer, usb_error_t error)
1523{
1524 enum {
1525 REQ_SIZE = sizeof(struct usb_device_request)
1526 };
1527 struct urb *urb = usbd_xfer_get_priv(xfer);
1528 struct usb_host_endpoint *uhe = usbd_xfer_softc(xfer);
1529 uint8_t *ptr;
1530 usb_frlength_t max_bulk = usbd_xfer_max_len(xfer);
1531 uint8_t data_frame = xfer->flags_int.control_xfr ? 1 : 0;
1532
1533 DPRINTF("\n");
1534
1535 switch (USB_GET_STATE(xfer)) {
1536 case USB_ST_TRANSFERRED:
1537
1538 if (xfer->flags_int.control_xfr) {
1539
1540 /* don't transfer the setup packet again: */
1541
1542 usbd_xfer_set_frame_len(xfer, 0, 0);
1543 }
1544 if (urb->bsd_isread && (!xfer->flags.ext_buffer)) {
1545 /* copy in data with regard to the URB */
1546 usbd_copy_out(xfer->frbuffers + data_frame, 0,
1547 urb->bsd_data_ptr, xfer->frlengths[data_frame]);
1548 }
1549 urb->bsd_length_rem -= xfer->frlengths[data_frame];
1550 urb->bsd_data_ptr += xfer->frlengths[data_frame];
1551 urb->actual_length += xfer->frlengths[data_frame];
1552
1553 /* check for short transfer */
1554 if (xfer->actlen < xfer->sumlen) {
1555 urb->bsd_length_rem = 0;
1556
1557 /* short transfer */
1558 if (urb->transfer_flags & URB_SHORT_NOT_OK) {
1559 urb->status = -EPIPE;
1560 } else {
1561 urb->status = 0;
1562 }
1563 } else {
1564 /* check remainder */
1565 if (urb->bsd_length_rem > 0) {
1566 goto setup_bulk;
1567 }
1568 /* success */
1569 urb->status = 0;
1570 }
1571
1572 /* call callback */
1573 usb_linux_complete(xfer);
1574
1575 case USB_ST_SETUP:
1576tr_setup:
1577 /* get next transfer */
1578 urb = TAILQ_FIRST(&uhe->bsd_urb_list);
1579 if (urb == NULL) {
1580 /* nothing to do */
1581 return;
1582 }
1583 TAILQ_REMOVE(&uhe->bsd_urb_list, urb, bsd_urb_list);
1584 urb->bsd_urb_list.tqe_prev = NULL;
1585
1586 usbd_xfer_set_priv(xfer, urb);
1587 xfer->flags.force_short_xfer = 0;
1588 xfer->timeout = urb->timeout;
1589
1590 if (xfer->flags_int.control_xfr) {
1591
1592 /*
1593 * USB control transfers need special handling.
1594 * First copy in the header, then copy in data!
1595 */
1596 if (!xfer->flags.ext_buffer) {
1597 usbd_copy_in(xfer->frbuffers, 0,
1598 urb->setup_packet, REQ_SIZE);
1599 usbd_xfer_set_frame_len(xfer, 0, REQ_SIZE);
1600 } else {
1601 /* set virtual address to load */
1602 usbd_xfer_set_frame_data(xfer, 0,
1603 urb->setup_packet, REQ_SIZE);
1604 }
1605
1606 ptr = urb->setup_packet;
1607
1608 /* setup data transfer direction and length */
1609 urb->bsd_isread = (ptr[0] & UT_READ) ? 1 : 0;
1610 urb->bsd_length_rem = ptr[6] | (ptr[7] << 8);
1611
1612 } else {
1613
1614 /* setup data transfer direction */
1615
1616 urb->bsd_length_rem = urb->transfer_buffer_length;
1617 urb->bsd_isread = (uhe->desc.bEndpointAddress &
1618 UE_DIR_IN) ? 1 : 0;
1619 }
1620
1621 urb->bsd_data_ptr = urb->transfer_buffer;
1622 urb->actual_length = 0;
1623
1624setup_bulk:
1625 if (max_bulk > urb->bsd_length_rem) {
1626 max_bulk = urb->bsd_length_rem;
1627 }
1628 /* check if we need to force a short transfer */
1629
1630 if ((max_bulk == urb->bsd_length_rem) &&
1631 (urb->transfer_flags & URB_ZERO_PACKET) &&
1632 (!xfer->flags_int.control_xfr)) {
1633 xfer->flags.force_short_xfer = 1;
1634 }
1635 /* check if we need to copy in data */
1636
1637 if (xfer->flags.ext_buffer) {
1638 /* set virtual address to load */
1639 usbd_xfer_set_frame_data(xfer, data_frame,
1640 urb->bsd_data_ptr, max_bulk);
1641 } else if (!urb->bsd_isread) {
1642 /* copy out data with regard to the URB */
1643 usbd_copy_in(xfer->frbuffers + data_frame, 0,
1644 urb->bsd_data_ptr, max_bulk);
1645 usbd_xfer_set_frame_len(xfer, data_frame, max_bulk);
1646 }
1647 if (xfer->flags_int.control_xfr) {
1648 if (max_bulk > 0) {
1649 xfer->nframes = 2;
1650 } else {
1651 xfer->nframes = 1;
1652 }
1653 } else {
1654 xfer->nframes = 1;
1655 }
1656 usbd_transfer_submit(xfer);
1657 return;
1658
1659 default:
1660 if (xfer->error == USB_ERR_CANCELLED) {
1661 urb->status = -ECONNRESET;
1662 } else {
1663 urb->status = -EPIPE;
1664 }
1665
1666 /* Set zero for "actual_length" */
1667 urb->actual_length = 0;
1668
1669 /* call callback */
1670 usb_linux_complete(xfer);
1671
1672 if (xfer->error == USB_ERR_CANCELLED) {
1673 /* we need to return in this case */
1674 return;
1675 }
1676 goto tr_setup;
1677 }
1678}
1679
1680/*------------------------------------------------------------------------*
1681 * usb_fill_bulk_urb
1682 *------------------------------------------------------------------------*/
1683void
1684usb_fill_bulk_urb(struct urb *urb, struct usb_device *udev,
1685 struct usb_host_endpoint *uhe, void *buf,
1686 int length, usb_complete_t callback, void *arg)
1687{
1688 urb->dev = udev;
1689 urb->endpoint = uhe;
1690 urb->transfer_buffer = buf;
1691 urb->transfer_buffer_length = length;
1692 urb->complete = callback;
1693 urb->context = arg;
1694}
1695
1696/*------------------------------------------------------------------------*
1697 * usb_bulk_msg
1698 *
1699 * NOTE: This function can also be used for interrupt endpoints!
1700 *
1701 * Return values:
1702 * 0: Success
1703 * Else: Failure
1704 *------------------------------------------------------------------------*/
1705int
1706usb_bulk_msg(struct usb_device *udev, struct usb_host_endpoint *uhe,
1707 void *data, int len, uint16_t *pactlen, usb_timeout_t timeout)
1708{
1709 struct urb *urb;
1710 int err;
1711
1712 if (uhe == NULL)
1713 return (-EINVAL);
1714 if (len < 0)
1715 return (-EINVAL);
1716
1717 err = usb_setup_endpoint(udev, uhe, 4096 /* bytes */);
1718 if (err)
1719 return (err);
1720
1721 urb = usb_alloc_urb(0, 0);
1722 if (urb == NULL)
1723 return (-ENOMEM);
1724
1725 usb_fill_bulk_urb(urb, udev, uhe, data, len,
1726 usb_linux_wait_complete, NULL);
1727
1728 err = usb_start_wait_urb(urb, timeout, pactlen);
1729
1730 usb_free_urb(urb);
1731
1732 return (err);
1733}
|