1/*- 2 * Implementation of SCSI Processor Target Peripheral driver for CAM. 3 * 4 * Copyright (c) 1998 Justin T. Gibbs. 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions, and the following disclaimer, 12 * without modification, immediately at the beginning of the file. 13 * 2. The name of the author may not be used to endorse or promote products 14 * derived from this software without specific prior written permission. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR 20 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26 * SUCH DAMAGE. 27 */ 28 29#include <sys/cdefs.h>
|
30__FBSDID("$FreeBSD: head/sys/cam/scsi/scsi_pt.c 164906 2006-12-05 07:45:28Z mjacob $");
|
30__FBSDID("$FreeBSD: head/sys/cam/scsi/scsi_pt.c 168752 2007-04-15 08:49:19Z scottl $"); |
31 32#include <sys/param.h> 33#include <sys/queue.h> 34#include <sys/systm.h> 35#include <sys/kernel.h> 36#include <sys/types.h> 37#include <sys/bio.h> 38#include <sys/devicestat.h> 39#include <sys/malloc.h> 40#include <sys/conf.h> 41#include <sys/ptio.h> 42 43#include <cam/cam.h> 44#include <cam/cam_ccb.h> 45#include <cam/cam_periph.h> 46#include <cam/cam_xpt_periph.h> 47#include <cam/cam_debug.h> 48 49#include <cam/scsi/scsi_all.h> 50#include <cam/scsi/scsi_message.h> 51#include <cam/scsi/scsi_pt.h> 52 53#include "opt_pt.h" 54 55typedef enum { 56 PT_STATE_PROBE, 57 PT_STATE_NORMAL 58} pt_state; 59 60typedef enum { 61 PT_FLAG_NONE = 0x00, 62 PT_FLAG_OPEN = 0x01, 63 PT_FLAG_DEVICE_INVALID = 0x02, 64 PT_FLAG_RETRY_UA = 0x04 65} pt_flags; 66 67typedef enum { 68 PT_CCB_BUFFER_IO = 0x01, 69 PT_CCB_WAITING = 0x02, 70 PT_CCB_RETRY_UA = 0x04, 71 PT_CCB_BUFFER_IO_UA = PT_CCB_BUFFER_IO|PT_CCB_RETRY_UA 72} pt_ccb_state; 73 74/* Offsets into our private area for storing information */ 75#define ccb_state ppriv_field0 76#define ccb_bp ppriv_ptr1 77 78struct pt_softc { 79 struct bio_queue_head bio_queue; 80 struct devstat *device_stats; 81 LIST_HEAD(, ccb_hdr) pending_ccbs; 82 pt_state state; 83 pt_flags flags; 84 union ccb saved_ccb; 85 int io_timeout; 86 struct cdev *dev; 87}; 88 89static d_open_t ptopen; 90static d_close_t ptclose; 91static d_strategy_t ptstrategy; 92static periph_init_t ptinit; 93static void ptasync(void *callback_arg, u_int32_t code, 94 struct cam_path *path, void *arg); 95static periph_ctor_t ptctor; 96static periph_oninv_t ptoninvalidate; 97static periph_dtor_t ptdtor; 98static periph_start_t ptstart; 99static void ptdone(struct cam_periph *periph, 100 union ccb *done_ccb); 101static d_ioctl_t ptioctl; 102static int pterror(union ccb *ccb, u_int32_t cam_flags, 103 u_int32_t sense_flags); 104 105void scsi_send_receive(struct ccb_scsiio *csio, u_int32_t retries, 106 void (*cbfcnp)(struct cam_periph *, union ccb *), 107 u_int tag_action, int readop, u_int byte2, 108 u_int32_t xfer_len, u_int8_t *data_ptr, 109 u_int8_t sense_len, u_int32_t timeout); 110 111static struct periph_driver ptdriver = 112{ 113 ptinit, "pt", 114 TAILQ_HEAD_INITIALIZER(ptdriver.units), /* generation */ 0 115}; 116 117PERIPHDRIVER_DECLARE(pt, ptdriver); 118 119 120static struct cdevsw pt_cdevsw = { 121 .d_version = D_VERSION,
|
122 .d_flags = D_NEEDGIANT,
|
122 .d_flags = 0, |
123 .d_open = ptopen, 124 .d_close = ptclose, 125 .d_read = physread, 126 .d_write = physwrite, 127 .d_ioctl = ptioctl, 128 .d_strategy = ptstrategy, 129 .d_name = "pt", 130}; 131 132#ifndef SCSI_PT_DEFAULT_TIMEOUT 133#define SCSI_PT_DEFAULT_TIMEOUT 60 134#endif 135 136static int 137ptopen(struct cdev *dev, int flags, int fmt, struct thread *td) 138{ 139 struct cam_periph *periph; 140 struct pt_softc *softc;
|
141 int unit;
142 int error;
143 int s;
|
141 int error = 0; |
142
|
145 unit = minor(dev);
|
143 periph = (struct cam_periph *)dev->si_drv1;
|
147 if (periph == NULL)
|
144 if (cam_periph_acquire(periph) != CAM_REQ_CMP) |
145 return (ENXIO); 146 147 softc = (struct pt_softc *)periph->softc; 148
|
152 s = splsoftcam();
|
149 cam_periph_lock(periph); |
150 if (softc->flags & PT_FLAG_DEVICE_INVALID) {
|
154 splx(s);
|
151 cam_periph_unlock(periph); 152 cam_periph_release(periph); |
153 return(ENXIO); 154 } 155
|
158 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE,
159 ("ptopen: dev=%s (unit %d)\n", devtoname(dev), unit));
160
161 if ((error = cam_periph_lock(periph, PRIBIO|PCATCH)) != 0) {
162 splx(s);
163 return (error); /* error code from tsleep */
|
156 if ((softc->flags & PT_FLAG_OPEN) == 0) 157 softc->flags |= PT_FLAG_OPEN; 158 else { 159 error = EBUSY; 160 cam_periph_release(periph); |
161 } 162
|
166 splx(s);
|
163 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, 164 ("ptopen: dev=%s\n", devtoname(dev))); |
165
|
168 if ((softc->flags & PT_FLAG_OPEN) == 0) {
169 if (cam_periph_acquire(periph) != CAM_REQ_CMP)
170 error = ENXIO;
171 else
172 softc->flags |= PT_FLAG_OPEN;
173 } else
174 error = EBUSY;
175
|
166 cam_periph_unlock(periph); 167 return (error); 168} 169 170static int 171ptclose(struct cdev *dev, int flag, int fmt, struct thread *td) 172{ 173 struct cam_periph *periph; 174 struct pt_softc *softc;
|
185 int error;
|
175 176 periph = (struct cam_periph *)dev->si_drv1; 177 if (periph == NULL) 178 return (ENXIO); 179 180 softc = (struct pt_softc *)periph->softc; 181
|
193 if ((error = cam_periph_lock(periph, PRIBIO)) != 0)
194 return (error); /* error code from tsleep */
|
182 cam_periph_lock(periph); |
183 184 softc->flags &= ~PT_FLAG_OPEN; 185 cam_periph_unlock(periph); 186 cam_periph_release(periph); 187 return (0); 188} 189 190/* 191 * Actually translate the requested transfer into one the physical driver 192 * can understand. The transfer is described by a buf and will include 193 * only one physical transfer. 194 */ 195static void 196ptstrategy(struct bio *bp) 197{ 198 struct cam_periph *periph; 199 struct pt_softc *softc;
|
212 int s;
|
200 201 periph = (struct cam_periph *)bp->bio_dev->si_drv1; 202 bp->bio_resid = bp->bio_bcount; 203 if (periph == NULL) { 204 biofinish(bp, NULL, ENXIO); 205 return; 206 }
|
207 cam_periph_lock(periph); |
208 softc = (struct pt_softc *)periph->softc; 209 210 /*
|
223 * Mask interrupts so that the pack cannot be invalidated until
224 * after we are in the queue. Otherwise, we might not properly
225 * clean up one of the buffers.
226 */
227 s = splbio();
228
229 /*
|
211 * If the device has been made invalid, error out 212 */ 213 if ((softc->flags & PT_FLAG_DEVICE_INVALID)) {
|
233 splx(s);
|
214 cam_periph_unlock(periph); |
215 biofinish(bp, NULL, ENXIO); 216 return; 217 } 218 219 /* 220 * Place it in the queue of disk activities for this disk 221 */ 222 bioq_insert_tail(&softc->bio_queue, bp); 223
|
243 splx(s);
244
|
224 /* 225 * Schedule ourselves for performing the work. 226 */ 227 xpt_schedule(periph, /* XXX priority */1);
|
228 cam_periph_unlock(periph); |
229 230 return; 231} 232 233static void 234ptinit(void) 235{ 236 cam_status status; 237 struct cam_path *path; 238 239 /* 240 * Install a global async callback. This callback will 241 * receive async callbacks like "new device found". 242 */ 243 status = xpt_create_path(&path, /*periph*/NULL, CAM_XPT_PATH_ID, 244 CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD); 245 246 if (status == CAM_REQ_CMP) { 247 struct ccb_setasync csa; 248 249 xpt_setup_ccb(&csa.ccb_h, path, /*priority*/5); 250 csa.ccb_h.func_code = XPT_SASYNC_CB; 251 csa.event_enable = AC_FOUND_DEVICE; 252 csa.callback = ptasync; 253 csa.callback_arg = NULL; 254 xpt_action((union ccb *)&csa); 255 status = csa.ccb_h.status; 256 xpt_free_path(path); 257 } 258 259 if (status != CAM_REQ_CMP) { 260 printf("pt: Failed to attach master async callback " 261 "due to status 0x%x!\n", status); 262 } 263} 264 265static cam_status 266ptctor(struct cam_periph *periph, void *arg) 267{ 268 struct pt_softc *softc; 269 struct ccb_setasync csa; 270 struct ccb_getdev *cgd; 271 272 cgd = (struct ccb_getdev *)arg; 273 if (periph == NULL) { 274 printf("ptregister: periph was NULL!!\n"); 275 return(CAM_REQ_CMP_ERR); 276 } 277 278 if (cgd == NULL) { 279 printf("ptregister: no getdev CCB, can't register device\n"); 280 return(CAM_REQ_CMP_ERR); 281 } 282 283 softc = (struct pt_softc *)malloc(sizeof(*softc),M_DEVBUF,M_NOWAIT); 284 285 if (softc == NULL) { 286 printf("daregister: Unable to probe new device. " 287 "Unable to allocate softc\n"); 288 return(CAM_REQ_CMP_ERR); 289 } 290 291 bzero(softc, sizeof(*softc)); 292 LIST_INIT(&softc->pending_ccbs); 293 softc->state = PT_STATE_NORMAL; 294 bioq_init(&softc->bio_queue); 295 296 softc->io_timeout = SCSI_PT_DEFAULT_TIMEOUT * 1000; 297 298 periph->softc = softc; 299 300 softc->device_stats = devstat_new_entry("pt", 301 periph->unit_number, 0, 302 DEVSTAT_NO_BLOCKSIZE, 303 SID_TYPE(&cgd->inq_data) | DEVSTAT_TYPE_IF_SCSI, 304 DEVSTAT_PRIORITY_OTHER); 305 306 softc->dev = make_dev(&pt_cdevsw, periph->unit_number, UID_ROOT, 307 GID_OPERATOR, 0600, "%s%d", periph->periph_name, 308 periph->unit_number); 309 softc->dev->si_drv1 = periph; 310 311 /* 312 * Add async callbacks for bus reset and 313 * bus device reset calls. I don't bother 314 * checking if this fails as, in most cases, 315 * the system will function just fine without 316 * them and the only alternative would be to 317 * not attach the device on failure. 318 */ 319 xpt_setup_ccb(&csa.ccb_h, periph->path, /*priority*/5); 320 csa.ccb_h.func_code = XPT_SASYNC_CB; 321 csa.event_enable = AC_SENT_BDR | AC_BUS_RESET | AC_LOST_DEVICE; 322 csa.callback = ptasync; 323 csa.callback_arg = periph; 324 xpt_action((union ccb *)&csa); 325 326 /* Tell the user we've attached to the device */ 327 xpt_announce_periph(periph, NULL); 328 329 return(CAM_REQ_CMP); 330} 331 332static void 333ptoninvalidate(struct cam_periph *periph) 334{
|
355 int s;
|
335 struct pt_softc *softc; 336 struct ccb_setasync csa; 337 338 softc = (struct pt_softc *)periph->softc; 339 340 /* 341 * De-register any async callbacks. 342 */ 343 xpt_setup_ccb(&csa.ccb_h, periph->path, 344 /* priority */ 5); 345 csa.ccb_h.func_code = XPT_SASYNC_CB; 346 csa.event_enable = 0; 347 csa.callback = ptasync; 348 csa.callback_arg = periph; 349 xpt_action((union ccb *)&csa); 350 351 softc->flags |= PT_FLAG_DEVICE_INVALID; 352 353 /*
|
375 * Although the oninvalidate() routines are always called at
376 * splsoftcam, we need to be at splbio() here to keep the buffer
377 * queue from being modified while we traverse it.
378 */
379 s = splbio();
380
381 /*
|
354 * Return all queued I/O with ENXIO. 355 * XXX Handle any transactions queued to the card 356 * with XPT_ABORT_CCB. 357 */ 358 bioq_flush(&softc->bio_queue, NULL, ENXIO); 359
|
388 splx(s);
389
|
360 xpt_print(periph->path, "lost device\n"); 361} 362 363static void 364ptdtor(struct cam_periph *periph) 365{ 366 struct pt_softc *softc; 367 368 softc = (struct pt_softc *)periph->softc; 369 370 devstat_remove_entry(softc->device_stats); 371 372 destroy_dev(softc->dev); 373 374 xpt_print(periph->path, "removing device entry\n"); 375 free(softc, M_DEVBUF); 376} 377 378static void 379ptasync(void *callback_arg, u_int32_t code, struct cam_path *path, void *arg) 380{ 381 struct cam_periph *periph; 382 383 periph = (struct cam_periph *)callback_arg; 384 switch (code) { 385 case AC_FOUND_DEVICE: 386 { 387 struct ccb_getdev *cgd; 388 cam_status status; 389 390 cgd = (struct ccb_getdev *)arg; 391 if (cgd == NULL) 392 break; 393 394 if (SID_TYPE(&cgd->inq_data) != T_PROCESSOR) 395 break; 396 397 /* 398 * Allocate a peripheral instance for 399 * this device and start the probe 400 * process. 401 */ 402 status = cam_periph_alloc(ptctor, ptoninvalidate, ptdtor, 403 ptstart, "pt", CAM_PERIPH_BIO, 404 cgd->ccb_h.path, ptasync, 405 AC_FOUND_DEVICE, cgd); 406 407 if (status != CAM_REQ_CMP 408 && status != CAM_REQ_INPROG) 409 printf("ptasync: Unable to attach to new device " 410 "due to status 0x%x\n", status); 411 break; 412 } 413 case AC_SENT_BDR: 414 case AC_BUS_RESET: 415 { 416 struct pt_softc *softc; 417 struct ccb_hdr *ccbh;
|
448 int s;
|
418 419 softc = (struct pt_softc *)periph->softc;
|
451 s = splsoftcam();
|
420 /* 421 * Don't fail on the expected unit attention 422 * that will occur. 423 */ 424 softc->flags |= PT_FLAG_RETRY_UA; 425 LIST_FOREACH(ccbh, &softc->pending_ccbs, periph_links.le) 426 ccbh->ccb_state |= PT_CCB_RETRY_UA;
|
459 splx(s);
|
427 } 428 /* FALLTHROUGH */ 429 default: 430 cam_periph_async(periph, code, path, arg); 431 break; 432 } 433} 434 435static void 436ptstart(struct cam_periph *periph, union ccb *start_ccb) 437{ 438 struct pt_softc *softc; 439 struct bio *bp;
|
473 int s;
|
440 441 softc = (struct pt_softc *)periph->softc; 442 443 /* 444 * See if there is a buf with work for us to do.. 445 */
|
480 s = splbio();
|
446 bp = bioq_first(&softc->bio_queue); 447 if (periph->immediate_priority <= periph->pinfo.priority) { 448 CAM_DEBUG_PRINT(CAM_DEBUG_SUBTRACE, 449 ("queuing for immediate ccb\n")); 450 start_ccb->ccb_h.ccb_state = PT_CCB_WAITING; 451 SLIST_INSERT_HEAD(&periph->ccb_list, &start_ccb->ccb_h, 452 periph_links.sle); 453 periph->immediate_priority = CAM_PRIORITY_NONE;
|
489 splx(s);
|
454 wakeup(&periph->ccb_list); 455 } else if (bp == NULL) {
|
492 splx(s);
|
456 xpt_release_ccb(start_ccb); 457 } else {
|
495 int oldspl;
496
|
458 bioq_remove(&softc->bio_queue, bp); 459 460 devstat_start_transaction_bio(softc->device_stats, bp); 461 462 scsi_send_receive(&start_ccb->csio, 463 /*retries*/4, 464 ptdone, 465 MSG_SIMPLE_Q_TAG, 466 bp->bio_cmd == BIO_READ, 467 /*byte2*/0, 468 bp->bio_bcount, 469 bp->bio_data, 470 /*sense_len*/SSD_FULL_SIZE, 471 /*timeout*/softc->io_timeout); 472 473 start_ccb->ccb_h.ccb_state = PT_CCB_BUFFER_IO_UA; 474 475 /* 476 * Block out any asyncronous callbacks 477 * while we touch the pending ccb list. 478 */
|
518 oldspl = splcam();
|
479 LIST_INSERT_HEAD(&softc->pending_ccbs, &start_ccb->ccb_h, 480 periph_links.le);
|
521 splx(oldspl);
|
481 482 start_ccb->ccb_h.ccb_bp = bp; 483 bp = bioq_first(&softc->bio_queue);
|
525 splx(s);
|
484 485 xpt_action(start_ccb); 486 487 if (bp != NULL) { 488 /* Have more work to do, so ensure we stay scheduled */ 489 xpt_schedule(periph, /* XXX priority */1); 490 } 491 } 492} 493 494static void 495ptdone(struct cam_periph *periph, union ccb *done_ccb) 496{ 497 struct pt_softc *softc; 498 struct ccb_scsiio *csio; 499 500 softc = (struct pt_softc *)periph->softc; 501 csio = &done_ccb->csio; 502 switch (csio->ccb_h.ccb_state) { 503 case PT_CCB_BUFFER_IO: 504 case PT_CCB_BUFFER_IO_UA: 505 { 506 struct bio *bp;
|
549 int oldspl;
|
507 508 bp = (struct bio *)done_ccb->ccb_h.ccb_bp; 509 if ((done_ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) { 510 int error;
|
554 int s;
|
511 int sf; 512 513 if ((csio->ccb_h.ccb_state & PT_CCB_RETRY_UA) != 0) 514 sf = SF_RETRY_UA; 515 else 516 sf = 0; 517 518 error = pterror(done_ccb, CAM_RETRY_SELTO, sf); 519 if (error == ERESTART) { 520 /* 521 * A retry was scheuled, so 522 * just return. 523 */ 524 return; 525 } 526 if (error != 0) {
|
571 s = splbio();
572
|
527 if (error == ENXIO) { 528 /* 529 * Catastrophic error. Mark our device 530 * as invalid. 531 */ 532 xpt_print(periph->path, 533 "Invalidating device\n"); 534 softc->flags |= PT_FLAG_DEVICE_INVALID; 535 } 536 537 /* 538 * return all queued I/O with EIO, so that 539 * the client can retry these I/Os in the 540 * proper order should it attempt to recover. 541 */ 542 bioq_flush(&softc->bio_queue, NULL, EIO);
|
589 splx(s);
|
543 bp->bio_error = error; 544 bp->bio_resid = bp->bio_bcount; 545 bp->bio_flags |= BIO_ERROR; 546 } else { 547 bp->bio_resid = csio->resid; 548 bp->bio_error = 0; 549 if (bp->bio_resid != 0) { 550 /* Short transfer ??? */ 551 bp->bio_flags |= BIO_ERROR; 552 } 553 } 554 if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) 555 cam_release_devq(done_ccb->ccb_h.path, 556 /*relsim_flags*/0, 557 /*reduction*/0, 558 /*timeout*/0, 559 /*getcount_only*/0); 560 } else { 561 bp->bio_resid = csio->resid; 562 if (bp->bio_resid != 0) 563 bp->bio_flags |= BIO_ERROR; 564 } 565 566 /* 567 * Block out any asyncronous callbacks 568 * while we touch the pending ccb list. 569 */
|
617 oldspl = splcam();
|
570 LIST_REMOVE(&done_ccb->ccb_h, periph_links.le);
|
619 splx(oldspl);
|
571 572 biofinish(bp, softc->device_stats, 0); 573 break; 574 } 575 case PT_CCB_WAITING: 576 /* Caller will release the CCB */ 577 wakeup(&done_ccb->ccb_h.cbfcnp); 578 return; 579 } 580 xpt_release_ccb(done_ccb); 581} 582 583static int 584pterror(union ccb *ccb, u_int32_t cam_flags, u_int32_t sense_flags) 585{ 586 struct pt_softc *softc; 587 struct cam_periph *periph; 588 589 periph = xpt_path_periph(ccb->ccb_h.path); 590 softc = (struct pt_softc *)periph->softc; 591 592 return(cam_periph_error(ccb, cam_flags, sense_flags, 593 &softc->saved_ccb)); 594} 595 596static int 597ptioctl(struct cdev *dev, u_long cmd, caddr_t addr, int flag, struct thread *td) 598{ 599 struct cam_periph *periph; 600 struct pt_softc *softc;
|
650 int error;
|
601 int error = 0; |
602 603 periph = (struct cam_periph *)dev->si_drv1; 604 if (periph == NULL) 605 return(ENXIO); 606 607 softc = (struct pt_softc *)periph->softc; 608
|
658 if ((error = cam_periph_lock(periph, PRIBIO|PCATCH)) != 0) {
659 return (error); /* error code from tsleep */
660 }
|
609 cam_periph_lock(periph); |
610 611 switch(cmd) { 612 case PTIOCGETTIMEOUT: 613 if (softc->io_timeout >= 1000) 614 *(int *)addr = softc->io_timeout / 1000; 615 else 616 *(int *)addr = 0; 617 break; 618 case PTIOCSETTIMEOUT:
|
670 {
671 int s;
672
|
619 if (*(int *)addr < 1) { 620 error = EINVAL; 621 break; 622 } 623
|
678 s = splsoftcam();
|
624 softc->io_timeout = *(int *)addr * 1000;
|
680 splx(s);
|
625 626 break;
|
683 }
|
627 default: 628 error = cam_periph_ioctl(periph, cmd, addr, pterror); 629 break; 630 } 631 632 cam_periph_unlock(periph); 633 634 return(error); 635} 636 637void 638scsi_send_receive(struct ccb_scsiio *csio, u_int32_t retries, 639 void (*cbfcnp)(struct cam_periph *, union ccb *), 640 u_int tag_action, int readop, u_int byte2, 641 u_int32_t xfer_len, u_int8_t *data_ptr, u_int8_t sense_len, 642 u_int32_t timeout) 643{ 644 struct scsi_send_receive *scsi_cmd; 645 646 scsi_cmd = (struct scsi_send_receive *)&csio->cdb_io.cdb_bytes; 647 scsi_cmd->opcode = readop ? RECEIVE : SEND; 648 scsi_cmd->byte2 = byte2; 649 scsi_ulto3b(xfer_len, scsi_cmd->xfer_len); 650 scsi_cmd->control = 0; 651 652 cam_fill_csio(csio, 653 retries, 654 cbfcnp, 655 /*flags*/readop ? CAM_DIR_IN : CAM_DIR_OUT, 656 tag_action, 657 data_ptr, 658 xfer_len, 659 sense_len, 660 sizeof(*scsi_cmd), 661 timeout); 662}
|