1#
2# Kernel configuration for Samsung Exynos 5 SoC.
3#
4# For more information on this file, please read the config(5) manual page,
5# and/or the handbook section on Kernel Configuration Files:
6#
7# http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
8#
9# The handbook is also available locally in /usr/share/doc/handbook
10# if you've installed the doc distribution, otherwise always see the
11# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
12# latest information.
13#
14# An exhaustive list of options and more detailed explanations of the
15# device lines is also present in the ../../conf/NOTES and NOTES files.
16# If you are in doubt as to the purpose or necessity of a line, check first
17# in NOTES.
18#
| 1#
2# Kernel configuration for Samsung Exynos 5 SoC.
3#
4# For more information on this file, please read the config(5) manual page,
5# and/or the handbook section on Kernel Configuration Files:
6#
7# http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
8#
9# The handbook is also available locally in /usr/share/doc/handbook
10# if you've installed the doc distribution, otherwise always see the
11# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
12# latest information.
13#
14# An exhaustive list of options and more detailed explanations of the
15# device lines is also present in the ../../conf/NOTES and NOTES files.
16# If you are in doubt as to the purpose or necessity of a line, check first
17# in NOTES.
18#
|
19# $FreeBSD: head/sys/arm/conf/EXYNOS5.common 276644 2015-01-03 23:57:03Z ian $
| 19# $FreeBSD: head/sys/arm/conf/EXYNOS5.common 276755 2015-01-06 16:15:57Z jhb $
|
20
21makeoptions MODULES_OVERRIDE=""
22makeoptions WITHOUT_MODULES="ahc"
23
24makeoptions WERROR="-Werror"
25
26options HZ=100
27options SCHED_ULE # ULE scheduler
28options PREEMPTION # Enable kernel thread preemption
29options INET # InterNETworking
30options INET6 # IPv6 communications protocols
31options SCTP # Stream Control Transmission Protocol
32options FFS # Berkeley Fast Filesystem
33options SOFTUPDATES # Enable FFS soft updates support
34options UFS_ACL # Support for access control lists
35options UFS_DIRHASH # Improve performance on big directories
36options UFS_GJOURNAL # Enable gjournal-based UFS journaling
37options QUOTA # Enable disk quotas for UFS
| 20
21makeoptions MODULES_OVERRIDE=""
22makeoptions WITHOUT_MODULES="ahc"
23
24makeoptions WERROR="-Werror"
25
26options HZ=100
27options SCHED_ULE # ULE scheduler
28options PREEMPTION # Enable kernel thread preemption
29options INET # InterNETworking
30options INET6 # IPv6 communications protocols
31options SCTP # Stream Control Transmission Protocol
32options FFS # Berkeley Fast Filesystem
33options SOFTUPDATES # Enable FFS soft updates support
34options UFS_ACL # Support for access control lists
35options UFS_DIRHASH # Improve performance on big directories
36options UFS_GJOURNAL # Enable gjournal-based UFS journaling
37options QUOTA # Enable disk quotas for UFS
|
38options NFSCL # New Network Filesystem Client
| 38options NFSCL # Network Filesystem Client
|
39options NFSLOCKD # Network Lock Manager
40options NFS_ROOT # NFS usable as /, requires NFSCL
41options MSDOSFS # MSDOS Filesystem
42options CD9660 # ISO 9660 Filesystem
43options PROCFS # Process filesystem (requires PSEUDOFS)
44options PSEUDOFS # Pseudo-filesystem framework
45options TMPFS # Efficient memory filesystem
46options GEOM_PART_GPT # GUID Partition Tables
47options GEOM_PART_BSD # BSD partition scheme
48options GEOM_PART_MBR # MBR partition scheme
49options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!]
50options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI
51options KTRACE # ktrace(1) support
52options SYSVSHM # SYSV-style shared memory
53options SYSVMSG # SYSV-style message queues
54options SYSVSEM # SYSV-style semaphores
55options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
56options KBD_INSTALL_CDEV # install a CDEV entry in /dev
57options FREEBSD_BOOT_LOADER # Process metadata passed from loader(8)
58options VFP # Enable floating point hardware support
59options SMP # Enable multiple cores
60
61# Debugging for use in -current
62makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols
63options BREAK_TO_DEBUGGER
64#options VERBOSE_SYSINIT # Enable verbose sysinit messages
65options KDB # Enable kernel debugger support
66# For minimum debugger support (stable branch) use:
67#options KDB_TRACE # Print a stack trace for a panic
68# For full debugger support use this instead:
69options DDB # Enable the kernel debugger
70#options INVARIANTS # Enable calls of extra sanity checking
71#options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS
72#options WITNESS # Enable checks to detect deadlocks and cycles
73#options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed
74#options DIAGNOSTIC
75
76# NFS root from boopt/dhcp
77#options BOOTP
78#options BOOTP_NFSROOT
79#options BOOTP_COMPAT
80#options BOOTP_NFSV3
81#options BOOTP_WIRED_TO=ue0
82
83options ROOTDEVNAME=\"ufs:/dev/da0\"
84
85# MMC/SD/SDIO Card slot support
86device mmc # mmc/sd bus
87device mmcsd # mmc/sd flash cards
88device dwmmc
89
90# Pseudo devices
91
92device loop
93device random
94device pty
95device md
96device gpio
97
98# USB support
99options USB_HOST_ALIGN=64 # Align usb buffers to cache line size.
100device usb
101options USB_DEBUG
102#options USB_REQ_DEBUG
103#options USB_VERBOSE
104#device musb
105device ehci
106#device ohci
107device xhci
108
109device umass
110device scbus # SCSI bus (required for ATA/SCSI)
111device da # Direct Access (disks)
112device pass
113
114# SATA
115#device ata
116#device atadisk
117#device mvs
118
119# Serial ports
120device uart
121
122# I2C (TWSI)
123device iic
124device iicbus
125
126# SPI
127device spibus
128device exynos_spi
129
130# Ethernet
131device ether
132device mii
133device smsc
134device smscphy
135
136# USB ethernet support, requires miibus
137device miibus
138device axe # ASIX Electronics USB Ethernet
139device bpf # Berkeley packet filter
| 39options NFSLOCKD # Network Lock Manager
40options NFS_ROOT # NFS usable as /, requires NFSCL
41options MSDOSFS # MSDOS Filesystem
42options CD9660 # ISO 9660 Filesystem
43options PROCFS # Process filesystem (requires PSEUDOFS)
44options PSEUDOFS # Pseudo-filesystem framework
45options TMPFS # Efficient memory filesystem
46options GEOM_PART_GPT # GUID Partition Tables
47options GEOM_PART_BSD # BSD partition scheme
48options GEOM_PART_MBR # MBR partition scheme
49options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!]
50options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI
51options KTRACE # ktrace(1) support
52options SYSVSHM # SYSV-style shared memory
53options SYSVMSG # SYSV-style message queues
54options SYSVSEM # SYSV-style semaphores
55options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
56options KBD_INSTALL_CDEV # install a CDEV entry in /dev
57options FREEBSD_BOOT_LOADER # Process metadata passed from loader(8)
58options VFP # Enable floating point hardware support
59options SMP # Enable multiple cores
60
61# Debugging for use in -current
62makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols
63options BREAK_TO_DEBUGGER
64#options VERBOSE_SYSINIT # Enable verbose sysinit messages
65options KDB # Enable kernel debugger support
66# For minimum debugger support (stable branch) use:
67#options KDB_TRACE # Print a stack trace for a panic
68# For full debugger support use this instead:
69options DDB # Enable the kernel debugger
70#options INVARIANTS # Enable calls of extra sanity checking
71#options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS
72#options WITNESS # Enable checks to detect deadlocks and cycles
73#options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed
74#options DIAGNOSTIC
75
76# NFS root from boopt/dhcp
77#options BOOTP
78#options BOOTP_NFSROOT
79#options BOOTP_COMPAT
80#options BOOTP_NFSV3
81#options BOOTP_WIRED_TO=ue0
82
83options ROOTDEVNAME=\"ufs:/dev/da0\"
84
85# MMC/SD/SDIO Card slot support
86device mmc # mmc/sd bus
87device mmcsd # mmc/sd flash cards
88device dwmmc
89
90# Pseudo devices
91
92device loop
93device random
94device pty
95device md
96device gpio
97
98# USB support
99options USB_HOST_ALIGN=64 # Align usb buffers to cache line size.
100device usb
101options USB_DEBUG
102#options USB_REQ_DEBUG
103#options USB_VERBOSE
104#device musb
105device ehci
106#device ohci
107device xhci
108
109device umass
110device scbus # SCSI bus (required for ATA/SCSI)
111device da # Direct Access (disks)
112device pass
113
114# SATA
115#device ata
116#device atadisk
117#device mvs
118
119# Serial ports
120device uart
121
122# I2C (TWSI)
123device iic
124device iicbus
125
126# SPI
127device spibus
128device exynos_spi
129
130# Ethernet
131device ether
132device mii
133device smsc
134device smscphy
135
136# USB ethernet support, requires miibus
137device miibus
138device axe # ASIX Electronics USB Ethernet
139device bpf # Berkeley packet filter
|