1# 2# NOTES -- Lines that can be cut/pasted into kernel and hints configs. 3# 4# This file contains machine dependent kernel configuration notes. For 5# machine independent notes, look in /sys/conf/NOTES. 6# |
7# $FreeBSD: head/sys/amd64/conf/NOTES 160813 2006-07-29 18:38:54Z marcel $ |
8# 9 10# 11# We want LINT to cover profiling as well. 12profile 2 13 14 15##################################################################### --- 80 unchanged lines hidden (view full) --- 96# CLK_USE_I8254_CALIBRATION causes the calibrated frequency of the i8254 97# clock to actually be used. 98options CLK_USE_I8254_CALIBRATION 99 100 101##################################################################### 102# MISCELLANEOUS DEVICES AND OPTIONS 103 |
104# 105# sio: serial ports (see sio(4)), including support for various 106# PC Card devices, such as Modem and NICs (see etc/defaults/pccard.conf) 107# 108device sio 109hint.sio.0.at="isa" 110hint.sio.0.port="0x3F8" 111hint.sio.0.flags="0x10" 112hint.sio.0.irq="4" 113 114# `flags' specific to sio(4). 115# 0x10 enable console support for this unit. Other console flags 116# (if applicable) are ignored unless this is set. Enabling 117# console support does not make the unit the preferred console. 118# Boot with -h or set boot_serial=YES in the loader. For sio(4) 119# specifically, the 0x20 flag can also be set (see above). 120# Currently, at most one unit can have console support; the 121# first one (in config file order) with this flag set is 122# preferred. Setting this flag for sio0 gives the old behaviour. 123# 0x20 force this unit to be the console (unless there is another 124# higher priority console). This replaces the COMCONSOLE option. 125# 0x40 reserve this unit for low level console operations. Do not 126# access the device in any normal way. 127# 0x80 use this port for serial line gdb support in ddb. Also known 128# as debug port. 129# PnP `flags' 130# 0x1 disable probing of this device. Used to prevent your modem 131# from being attached as a PnP modem. 132# Other flags for sio that aren't documented in the man page. 133# 0x20000 enable hardware RTS/CTS and larger FIFOs. Only works for 134# ST16650A-compatible UARTs. 135 136# Options for sio: 137options COM_ESP # Code for Hayes ESP. 138options COM_MULTIPORT # Code for some cards with shared IRQs. 139options CONSPEED=115200 # Speed for serial console 140 # (default 9600). 141 |
142device speaker #Play IBM BASIC-style noises out your speaker 143hint.speaker.0.at="isa" 144hint.speaker.0.port="0x61" 145device gzip #Exec gzipped a.out's. REQUIRES COMPAT_AOUT! 146 147 148##################################################################### 149# HARDWARE BUS CONFIGURATION --- 464 unchanged lines hidden --- |