1.\"
2.\" Copyright (c) 1998-2001 Semen Ustimenko (semenu@FreeBSD.org)
3.\"
4.\" All rights reserved.
5.\"
6.\" Redistribution and use in source and binary forms, with or without
7.\" modification, are permitted provided that the following conditions
8.\" are met:
9.\" 1. Redistributions of source code must retain the above copyright
10.\" notice, this list of conditions and the following disclaimer.
11.\" 2. Redistributions in binary form must reproduce the above copyright
12.\" notice, this list of conditions and the following disclaimer in the
13.\" documentation and/or other materials provided with the distribution.
14.\"
15.\" THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY EXPRESS OR
16.\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
17.\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
18.\" IN NO EVENT SHALL THE DEVELOPERS BE LIABLE FOR ANY DIRECT, INDIRECT,
19.\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
20.\" NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
21.\" DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
22.\" THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
23.\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
24.\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
25.\"
26.\" $FreeBSD: head/share/man/man4/tx.4 148145 2005-07-19 00:26:30Z trhodes $
27.\"
28.Dd July 16, 2005
29.Dt TX 4
30.Os
31.Sh NAME
32.Nm tx
33.Nd "SMC 83c17x Fast Ethernet device driver"
34.Sh SYNOPSIS
35To compile support for the
36.Nm
37driver into your kernel, place the following lines in your kernel configuration file:
38.Bd -ragged -offset indent
39.Cd "device miibus"
40.Cd "device tx"
41.Ed
42.Pp
43Alternatively, to load the
44.Nm
45driver at boot time, place the following line in
46.Xr loader.conf 5 :
47.Bd -literal -offset indent
48if_tx_load="YES"
49.Ed
50.Sh DESCRIPTION
51The
52.Nm
53driver provides support for the Ethernet adapters based on the
54SMC 83c17x (EPIC) chips.
55These are mostly SMC 9432 series cards.
56.Pp
57The
58.Nm
59driver supports the following media types (depending on card's capabilities):
60.Pp
61.Bl -tag -width ".Cm 10baseT/UTP"
62.It Cm autoselect
63Enable autonegotiation (default).
64.It Cm 100baseFX
65Set 100Mbps (Fast Ethernet) fiber optic operation.
66.It Cm 100baseTX
67Set 100Mbps (Fast Ethernet) twisted pair operation.
68.It Cm 10baseT/UTP
69Set 10Mbps on 10baseT port.
70.It Cm 10base2/BNC
71Set 10Mbps on 10base2 port.
72.El
73.Pp
74The
75.Nm
76driver supports the following media options:
77.Bl -tag -width ".Cm full-duplex"
78.It Cm full-duplex
79Set full-duplex operation.
80.El
81.Pp
82The
83.Nm
84driver supports oversized Ethernet packets (up to 1600 bytes).
85Refer to the
86.Xr ifconfig 8
87man page on setting the interface's MTU.
88.Pp
89The old
90.Dq Li "ifconfig tx0 linkN"
91method of configuration is not supported.
92.Ss "VLAN (IEEE 802.1Q) support"
93The
94.Nm
95driver supports the VLAN operation (using
96.Xr vlan 4
97interfaces) without decreasing the MTU on the
98.Xr vlan 4
99interfaces.
100.Sh DIAGNOSTICS
101.Bl -diag
102.It "tx%d: device timeout %d packets"
103The device stops responding.
104Device and driver reset follows this error.
105.It "tx%d: PCI fatal error occurred (%s)"
106One of following errors occurred: PCI Target Abort, PCI Master Abort, Data
107Parity Error or Address Parity Error.
108Device and driver reset follows this error.
109.It "tx%d: cannot allocate mbuf header/cluster"
110Cannot allocate memory for received packet.
111Packet thrown away.
112.It "tx%d: can't stop %s DMA"
113While resetting, the driver failed to stop the device correctly.
114.El
115.Sh SEE ALSO
116.Xr arp 4 ,
117.Xr miibus 4 ,
118.Xr netintro 4 ,
119.Xr ng_ether 4 ,
120.Xr ifconfig 8
121.Sh BUGS
122The auto-negotiation does not work very well.
2.\" Copyright (c) 1998-2001 Semen Ustimenko (semenu@FreeBSD.org)
3.\"
4.\" All rights reserved.
5.\"
6.\" Redistribution and use in source and binary forms, with or without
7.\" modification, are permitted provided that the following conditions
8.\" are met:
9.\" 1. Redistributions of source code must retain the above copyright
10.\" notice, this list of conditions and the following disclaimer.
11.\" 2. Redistributions in binary form must reproduce the above copyright
12.\" notice, this list of conditions and the following disclaimer in the
13.\" documentation and/or other materials provided with the distribution.
14.\"
15.\" THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY EXPRESS OR
16.\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
17.\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
18.\" IN NO EVENT SHALL THE DEVELOPERS BE LIABLE FOR ANY DIRECT, INDIRECT,
19.\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
20.\" NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
21.\" DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
22.\" THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
23.\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
24.\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
25.\"
26.\" $FreeBSD: head/share/man/man4/tx.4 148145 2005-07-19 00:26:30Z trhodes $
27.\"
28.Dd July 16, 2005
29.Dt TX 4
30.Os
31.Sh NAME
32.Nm tx
33.Nd "SMC 83c17x Fast Ethernet device driver"
34.Sh SYNOPSIS
35To compile support for the
36.Nm
37driver into your kernel, place the following lines in your kernel configuration file:
38.Bd -ragged -offset indent
39.Cd "device miibus"
40.Cd "device tx"
41.Ed
42.Pp
43Alternatively, to load the
44.Nm
45driver at boot time, place the following line in
46.Xr loader.conf 5 :
47.Bd -literal -offset indent
48if_tx_load="YES"
49.Ed
50.Sh DESCRIPTION
51The
52.Nm
53driver provides support for the Ethernet adapters based on the
54SMC 83c17x (EPIC) chips.
55These are mostly SMC 9432 series cards.
56.Pp
57The
58.Nm
59driver supports the following media types (depending on card's capabilities):
60.Pp
61.Bl -tag -width ".Cm 10baseT/UTP"
62.It Cm autoselect
63Enable autonegotiation (default).
64.It Cm 100baseFX
65Set 100Mbps (Fast Ethernet) fiber optic operation.
66.It Cm 100baseTX
67Set 100Mbps (Fast Ethernet) twisted pair operation.
68.It Cm 10baseT/UTP
69Set 10Mbps on 10baseT port.
70.It Cm 10base2/BNC
71Set 10Mbps on 10base2 port.
72.El
73.Pp
74The
75.Nm
76driver supports the following media options:
77.Bl -tag -width ".Cm full-duplex"
78.It Cm full-duplex
79Set full-duplex operation.
80.El
81.Pp
82The
83.Nm
84driver supports oversized Ethernet packets (up to 1600 bytes).
85Refer to the
86.Xr ifconfig 8
87man page on setting the interface's MTU.
88.Pp
89The old
90.Dq Li "ifconfig tx0 linkN"
91method of configuration is not supported.
92.Ss "VLAN (IEEE 802.1Q) support"
93The
94.Nm
95driver supports the VLAN operation (using
96.Xr vlan 4
97interfaces) without decreasing the MTU on the
98.Xr vlan 4
99interfaces.
100.Sh DIAGNOSTICS
101.Bl -diag
102.It "tx%d: device timeout %d packets"
103The device stops responding.
104Device and driver reset follows this error.
105.It "tx%d: PCI fatal error occurred (%s)"
106One of following errors occurred: PCI Target Abort, PCI Master Abort, Data
107Parity Error or Address Parity Error.
108Device and driver reset follows this error.
109.It "tx%d: cannot allocate mbuf header/cluster"
110Cannot allocate memory for received packet.
111Packet thrown away.
112.It "tx%d: can't stop %s DMA"
113While resetting, the driver failed to stop the device correctly.
114.El
115.Sh SEE ALSO
116.Xr arp 4 ,
117.Xr miibus 4 ,
118.Xr netintro 4 ,
119.Xr ng_ether 4 ,
120.Xr ifconfig 8
121.Sh BUGS
122The auto-negotiation does not work very well.