1.\"
2.\" Copyright (c) 1998-2001 Semen Ustimenko (semenu@FreeBSD.org)
3.\"
4.\" All rights reserved.
5.\"
6.\" Redistribution and use in source and binary forms, with or without
7.\" modification, are permitted provided that the following conditions
8.\" are met:
9.\" 1. Redistributions of source code must retain the above copyright
10.\" notice, this list of conditions and the following disclaimer.
11.\" 2. Redistributions in binary form must reproduce the above copyright
12.\" notice, this list of conditions and the following disclaimer in the
13.\" documentation and/or other materials provided with the distribution.
14.\"
15.\" THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY EXPRESS OR
16.\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
17.\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
18.\" IN NO EVENT SHALL THE DEVELOPERS BE LIABLE FOR ANY DIRECT, INDIRECT,
19.\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
20.\" NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
21.\" DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
22.\" THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
23.\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
24.\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
25.\"
26.\" $FreeBSD: head/share/man/man4/tx.4 148220 2005-07-21 05:02:39Z trhodes $
27.\"
28.Dd July 16, 2005
29.Dt TX 4
30.Os
31.Sh NAME
32.Nm tx
33.Nd "SMC 83c17x Fast Ethernet device driver"
34.Sh SYNOPSIS
35To compile support for the
36.Nm
37driver into your kernel, place the following lines in your
38kernel configuration file:
39.Bd -ragged -offset indent
40.Cd "device miibus"
41.Cd "device tx"
42.Ed
43.Pp
44Alternatively, to load the
45.Nm
46driver at boot time, place the following line in
47.Xr loader.conf 5 :
48.Bd -literal -offset indent
49if_tx_load="YES"
50.Ed
51.Sh DESCRIPTION
52The
53.Nm
54driver provides support for the Ethernet adapters based on the
55SMC 83c17x (EPIC) chips.
56These are mostly SMC 9432 series cards.
57.Pp
58The
59.Nm
60driver supports the following media types (depending on card's capabilities):
61.Pp
62.Bl -tag -width ".Cm 10baseT/UTP"
63.It Cm autoselect
64Enable autonegotiation (default).
65.It Cm 100baseFX
66Set 100Mbps (Fast Ethernet) fiber optic operation.
67.It Cm 100baseTX
68Set 100Mbps (Fast Ethernet) twisted pair operation.
69.It Cm 10baseT/UTP
70Set 10Mbps on 10baseT port.
71.It Cm 10base2/BNC
72Set 10Mbps on 10base2 port.
73.El
74.Pp
75The
76.Nm
77driver supports the following media options:
78.Bl -tag -width ".Cm full-duplex"
79.It Cm full-duplex
80Set full-duplex operation.
81.El
82.Pp
83The
84.Nm
85driver supports oversized Ethernet packets (up to 1600 bytes).
86Refer to the
87.Xr ifconfig 8
88man page on setting the interface's MTU.
89.Pp
90The old
91.Dq Li "ifconfig tx0 linkN"
92method of configuration is not supported.
93.Ss "VLAN (IEEE 802.1Q) support"
94The
95.Nm
96driver supports the VLAN operation (using
97.Xr vlan 4
98interfaces) without decreasing the MTU on the
99.Xr vlan 4
100interfaces.
101.Sh DIAGNOSTICS
102.Bl -diag
103.It "tx%d: device timeout %d packets"
104The device stops responding.
105Device and driver reset follows this error.
106.It "tx%d: PCI fatal error occurred (%s)"
107One of following errors occurred: PCI Target Abort, PCI Master Abort, Data
108Parity Error or Address Parity Error.
109Device and driver reset follows this error.
110.It "tx%d: cannot allocate mbuf header/cluster"
111Cannot allocate memory for received packet.
112Packet thrown away.
113.It "tx%d: can't stop %s DMA"
114While resetting, the driver failed to stop the device correctly.
115.El
116.Sh SEE ALSO
117.Xr arp 4 ,
118.Xr miibus 4 ,
119.Xr netintro 4 ,
120.Xr ng_ether 4 ,
121.Xr ifconfig 8
122.Sh BUGS
123The auto-negotiation does not work very well.
2.\" Copyright (c) 1998-2001 Semen Ustimenko (semenu@FreeBSD.org)
3.\"
4.\" All rights reserved.
5.\"
6.\" Redistribution and use in source and binary forms, with or without
7.\" modification, are permitted provided that the following conditions
8.\" are met:
9.\" 1. Redistributions of source code must retain the above copyright
10.\" notice, this list of conditions and the following disclaimer.
11.\" 2. Redistributions in binary form must reproduce the above copyright
12.\" notice, this list of conditions and the following disclaimer in the
13.\" documentation and/or other materials provided with the distribution.
14.\"
15.\" THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY EXPRESS OR
16.\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
17.\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
18.\" IN NO EVENT SHALL THE DEVELOPERS BE LIABLE FOR ANY DIRECT, INDIRECT,
19.\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
20.\" NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
21.\" DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
22.\" THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
23.\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
24.\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
25.\"
26.\" $FreeBSD: head/share/man/man4/tx.4 148220 2005-07-21 05:02:39Z trhodes $
27.\"
28.Dd July 16, 2005
29.Dt TX 4
30.Os
31.Sh NAME
32.Nm tx
33.Nd "SMC 83c17x Fast Ethernet device driver"
34.Sh SYNOPSIS
35To compile support for the
36.Nm
37driver into your kernel, place the following lines in your
38kernel configuration file:
39.Bd -ragged -offset indent
40.Cd "device miibus"
41.Cd "device tx"
42.Ed
43.Pp
44Alternatively, to load the
45.Nm
46driver at boot time, place the following line in
47.Xr loader.conf 5 :
48.Bd -literal -offset indent
49if_tx_load="YES"
50.Ed
51.Sh DESCRIPTION
52The
53.Nm
54driver provides support for the Ethernet adapters based on the
55SMC 83c17x (EPIC) chips.
56These are mostly SMC 9432 series cards.
57.Pp
58The
59.Nm
60driver supports the following media types (depending on card's capabilities):
61.Pp
62.Bl -tag -width ".Cm 10baseT/UTP"
63.It Cm autoselect
64Enable autonegotiation (default).
65.It Cm 100baseFX
66Set 100Mbps (Fast Ethernet) fiber optic operation.
67.It Cm 100baseTX
68Set 100Mbps (Fast Ethernet) twisted pair operation.
69.It Cm 10baseT/UTP
70Set 10Mbps on 10baseT port.
71.It Cm 10base2/BNC
72Set 10Mbps on 10base2 port.
73.El
74.Pp
75The
76.Nm
77driver supports the following media options:
78.Bl -tag -width ".Cm full-duplex"
79.It Cm full-duplex
80Set full-duplex operation.
81.El
82.Pp
83The
84.Nm
85driver supports oversized Ethernet packets (up to 1600 bytes).
86Refer to the
87.Xr ifconfig 8
88man page on setting the interface's MTU.
89.Pp
90The old
91.Dq Li "ifconfig tx0 linkN"
92method of configuration is not supported.
93.Ss "VLAN (IEEE 802.1Q) support"
94The
95.Nm
96driver supports the VLAN operation (using
97.Xr vlan 4
98interfaces) without decreasing the MTU on the
99.Xr vlan 4
100interfaces.
101.Sh DIAGNOSTICS
102.Bl -diag
103.It "tx%d: device timeout %d packets"
104The device stops responding.
105Device and driver reset follows this error.
106.It "tx%d: PCI fatal error occurred (%s)"
107One of following errors occurred: PCI Target Abort, PCI Master Abort, Data
108Parity Error or Address Parity Error.
109Device and driver reset follows this error.
110.It "tx%d: cannot allocate mbuf header/cluster"
111Cannot allocate memory for received packet.
112Packet thrown away.
113.It "tx%d: can't stop %s DMA"
114While resetting, the driver failed to stop the device correctly.
115.El
116.Sh SEE ALSO
117.Xr arp 4 ,
118.Xr miibus 4 ,
119.Xr netintro 4 ,
120.Xr ng_ether 4 ,
121.Xr ifconfig 8
122.Sh BUGS
123The auto-negotiation does not work very well.